- Computers & electronics
- Audio & home theatre
- Supplementary music equipment
- Samsung
- BN68-02617A-02
- User's manual
Samsung BN68-02617A-02 User's Manual
Add to My manuals2 Pages
Samsung LN46C750R2F boasts an impressive array of features to enhance your viewing experience. Immerse yourself in crystal-clear visuals with its 46-inch screen and 1080p Full HD resolution. Connect your favorite devices effortlessly via HDMI, USB, and component inputs. Enjoy a cinematic audio experience with the built-in digital audio system and enhanced sound quality through external audio devices.
advertisement
Quick Setup Guide
Congratulations on the purchase of your new Samsung TV. Read this setup guide to get your TV up and running quickly.
StoP
Please do not return this unit.
If you have problems operating your
TV, call:
1-800-SAMSUNG (1-800-726-7864)
For web support please visit: www.samsung.com/support
1-800-SAMSUNG (1-800-726-7864)
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park, NJ 07660-2112
Samsung Electronics Canada Inc.
55 Standish Court Mississauga, Ontario L5R 4B2
Call Center hours of operation: Mon-Sun, 9:00 AM -12 AM EST.
To register this product, visit: www.samsung.com/register.
Step 4 : Connect External Devices
Connecting an AV device (Blu-ray player, cable/satellite box, etc.)
For the very best picture quality, select HD signal sources and use HDMI cables and connections. Note that many digital cable programs are not in HD. Check with your video provider to ensure your are receiving HD signals.
HD connection (up to 1080p)
Using an HDMI Cable
HDMI OUT Device
Connecting an audio device
Connect your TV to your Home Theater or other audio device to enjoy enhanced sound quality.
Analog Audio connection
Using an Audio Cable
AUDIO IN
Device
Getting Started
Step 1 : Install the Stand
Follow the steps below to connect the TV to the stand.
✎
✎
✎
Make sure to distinguish between the front and back of the Stand and Guide
Stand when assembling them.
Make sure that at least two people lift and move the LCD TV.
Stand the product up and fasten the screws. If you fasten the screws with the LCD
TV placed down, it may lean to one side.
1
Guide Stand
2
AV IN 2
The HDMI connection carries digital video and audio.
DVD / Blu-Ray player / HD Cable Box /
HD Satellite receiver (STB)
AUDIO OUT
Best Connection
HD connection (up to 1080p)
Using an DVI to HDMI Cable
DVI OUT Device
AV IN 2
DVD / Blu-Ray player /
Cable Box /
Satellite receiver (STB)
Very Good Connection
Component connection (up to 1080p)
Using a Component Cable
AUDIO OUT COMPONENT OUT Device
Connecting a PC
Connect your TV to a PC to use it as a Monitor.
Stand
Screw Top View
3
Bottom View
Audio/Video connection (480i only)
Using an Audio/Video Cable
VIDEO OUT AUDIO OUT
VCR
VCR / DVD / Blu-ray player / Cable Box /
Satellite receiver
✎ When connecting to AV in 1 on the back of your TV, attach the video cable (yellow) to the green jack next to the AV in 1 label. The jack will not match the color of the video cable (yellow).
VCR / DVD / Blu-ray player / Cable Box
/ Satellite receiver
Good Connection
Lowest Quality Connection
Rear
Front
Step 2 : Install the Batteries into the Remote
To install batteries into your remote control, follow these steps:
1. Lift the cover on the back of the remote upward as shown in the figure to the right.
2. Install two AAA batteries.
✎ Make sure to match the + and - ends of the batteries to the diagram in the battery compartment.
3. Replace the cover.
Step 3 : Connect Power and Antenna or Cable
Power Input or
Use a 75 ohm (round) cable.
Connect Ant in to:
• Wall cable jack or
• VHF/UHF
Antenna or
• Cable or Satellite
box Ant or Cable
Out
Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
Step 5 : Run Plug & Play
When you turn on your TV for the first time, it automatically launches the Plug &
Play function. With Plug & Play, you can select the On Screen Display language, set the clock mode, and launch the TV’s channel memorizing process. It also displays connection instructions similar to those in this guide.
To navigate while Plug & Play is running, press the Up, Down, Left or Right arrow buttons on your remote. To make a selection, press the
To skip a screen, press the MEnu button.
EntErE button.
To turn on your TV, press the PowEr button on the remote or press the
PowEr button on the TV. To run Plug & Play, follow these steps:
Plug & Play
Select Language of the oSD.
English
Language : English
Français
U Move E Enter
After you have selected the cable system type, select Start, and then press the EntErE button on your remote.
✎ Most cable systems are Standard (StD) systems. If you are not sure about what kind of cable system you have, contact your cable company.
5. The TV memorizes the available channels. This process can take up to 45 minutes. After the TV has memorized the channels, the Clock Mode screen appears.
6. Choose the Clock Mode. Select Auto if you have a digital channel in your area. Select Manual if you don’t, or if you have a cable or satellite box.
When done, press EntErE button. The Daylight Savings screen appears.
✎ If you select Manual, the clock setting screen appears.
7. Select the Daylight Saving Time setting: off, on, or Auto, and then press
EntErE button.
8. After the time zone screen, The connection method for best HD screen quality is displayed. Press Right arrow button on your remote to view each screen in succession. Press the Blue button to skip this section.
9. the Enjoy your tV screen appears. and then press EntErE button.
1. On the Language screen, select the language for the On Screen Display
(OSD) using your remote control, and then press EntErE button. The
Home Use screen appears.
2. Select Home use, and then press EntErE button. If you select Store
Demo, the TV will reset your picture and audio settings every 30 minutes. After you press EntErE button, the Antenna Source screen appears.
3. If your TV is only attached to an antenna, select Air. If your TV is only attached to cable and you have no cable box, select Cable. If your TV is attached to an antenna and cable with no box, select Auto. When done, press EntErE button on your remote. The Select Cable System screen appears.
IMPORTANT: If your TV is attached to a cable or satellite box, skip Steps
3 through 5. After Plug & Play is complete, set your TV to Channel 3 or 4, according to the directions for your cable or satellite box.
4. If your TV is attached to a cable system and you have no cable box, you must select your cable system type. If you have Digital cable, you must select the cable system type for both Analog and Digital.
USB2
HDMI IN 4 (HDD)
USB1
Basic Functions
Changing the Screen Size
Your TV has several screen size options, each designed to work best with specific types of video input. If you have a cable box or satellite receiver, it may have its own set of screen sizes as well.
To change the screen size, press the P.SizE
button on your remote. The first time you press it, your TV displays the current setting. Thereafter, each time you press the P.SizE
button, you change the size of the picture on the screen.
English - 1 the following sizes are available:
16:9 Wide screen Zoom 1
Amplifier / DVD Home Theater
Digital Audio connection
using an optical Cable
Digital Audio System
OPTICAL
HD connection
using an HDMi Cable
AUDIO OUT DVI OUT
Using an D-Sub Cable
PC OUT AUDIO OUT
Zoom 2
PC
PC
Wide Fit 4:3 Standard screen Screen Fit
✎ Screen Fit displays a full HD picture covering the entire screen with no cutoff on any side. It is only available when your TV inputs an HDMI (720p, 1080i,
1080p), Component (1080i, 1080p), or DTV (over-the-air 1080i) signal.
Changing the Picture Mode
Your TV has four preset Picture Modes with factory adjusted settings, each designed to give you an excellent picture under specific conditions.
the Picture Modes are listed and described in the table below:
Mode
Dynamic
Description
Brightens picture. For a vibrant, enhanced image in brightly lit or sunny room.
Standard For a bright, detailed picture in a normally lit room.
natural
Movie
For a comfortable, easy-on-the-eyes picture in a normally lit room.
For a studio quality cinema picture in a dimly lit or dark room.
to change the Picture Mode, follow these steps:
1. With the TV on, press the tooLS button on your remote.
The tools menu appears.
2. Using the ▲ or ▼ on your remote, select Picture mode.
3. On the Picture Mode menu, use the ◄ or ► on your remote to select the Picture Mode you want.
4. Press the Exit button to exit the menu.
BN68-02617A-Eng.indd 1 2010-08-31 �� 10:07:07
USB2
HDMI IN 4 (HDD)
USB1
Remote Control Buttons and Functions:
✎ This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel, Volume buttons.
Turns the TV on and off.
Press to switch between the sources (Blu-ray player, cable box, DVD player, etc.) connected to your TV.
Press number buttons for direct access to channels.
Press to select additional digital channels broadcast by the same station. For example, to select channel
54-3, press 54, press -, and then press 3.
Adjusts the volume.
Displays the channel list on the screen.
Displays the Content View, which includes Channel
List , Internet@TV , Media Play , AllShare and 3D .
Quickly selects frequently used functions.
Selects the on-screen menu items and changes the values seen on the menu.
Return to the previous menu.
Colored buttons for use in the Channel List ,
Internet@TV , Media Play menu, etc.
Use these buttons in the Media Play and Anynet+ modes.
(
Viewing the On Screen Menus
to view the on Screen Menus, follow these steps:
1. With the power on, press the MEnu button on your remote. The main menu appears.
The menu’s left side has the following menu options: Picture, Sound, Channel,
Setup, input, Application, and Support.
Menu
@
TV
TV
2. Press the ▲ or ▼ button on your remote to select a menu option, and then press the
EntErE button.
3. When done using the menu, press the Exit button on your remote to exit.
MEDIA.P
MEDIA.P
FAV.CH
FAV.CH
YAHOO!
YAHOO!
CONTENT
Selecting a Source
To watch a movie on your Blu-ray player or watch your favorite TV show, you must select the correct source. A source is a device, such as a Blu-ray/
DVD player, a cable/satellite box, antenna or a cable TV input. Sources can be connected to your TV through the HDMI, DVI, Component,
Composite, or D-sub connections, or through the
Antenna or Cable In connections.
To view the signal from a source connected to the HDMI, DVI, Component,
Composite, or D-sub jack, press the SourCE button on your remote. Each time you press the SourCE button, you change to a different source.
MEDIA.P
FAV.CH
YAHOO!
@
TV
INTERNET
Turns the remote control light on and off.
When on, the buttons become illuminated for a moment when pressed.
(Using the remote control with this button set to off will reduce the battery usage time.)
Return to the previous channel.
Cuts off the sound temporarily.
Change channels.
✎ If your TV is attached to a cable or satellite box, you change the channel using the box’s remote.
Displays the main on-screen menu.
Link to various internet services.
Press to display information on the TV screen.
Exits the menu.
MEDIA.P
: Views Media Play .
YAHOO!
: Runs Yahoo widget!
3D( )
: Sets the 3D mode.
FAV.CH
: Displays Favorite Channel Lists on the screen.
P.SIZE
: Choose the picture size.
CC : Controls the caption decoder.
Changing Channels and Adjusting the Volume
You can change the channel and adjust the volume by using the CH and VoL buttons on the remote. You can also change the channels by pressing the z buttons on the front panel of your TV and adjust the volume by pressing the y buttons.
Remote control sensor
Power Indicator
Setting the Clock
Before you can use your tV’s on/off timer, you must set the clock. to set the clock, follow these steps:
1. Turn on your TV.
2. Using your remote, press the
MEnu button on your remote.
Then, select Setup → time.
3. Select Clock Mode, and then press the EntErE button. Set
Clock Mode to Manual.
✎ Select Auto if you have a digital channel in your area and are not using a cable/sat box.
Month
--
Hour
--
Clock Set
Day
--
Minute
--
Year
---am/pm
--
L
Move
U
Adjust
E
Enter R Return
4. Select Clock Set, and then press the EntErE button.
The Clock Set screen appears.
5. Using the number buttons on your remote, enter the Month, Day, Year,
Hour, and Minute. Use the ◄ or ► button to move between entry fields.
6. Press the rEturn button on your remote when done.
Connecting a USB Device for Media Play Network Connection - Wireless
You can enjoy photo, music, and movie files stored on a uSB device by connecting it to the tV and using the Media Play feature. to connect a uSB device for Media Play, follow these steps:
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie files to the uSB1 (HDD) or uSB2 jack on the side of the
TV.
3. When the Application selection screen appears, press the EntErE button on your remote to select Media
Play (uSB).
Media Play
Videos
SuM A Change Device
TV Side Panel uSB Drive
D View Devices E Enter R return
Connecting to a Local Area Network
To enjoy watching streaming content from online providers such as You Tube and
Blockbuster, you must follow the steps below to connect the TV to your network.
You can connect your TV to your LAN through a standard wireless router or modem.
To connect wirelessly, you must first attach a Samsung Wireless LAN Adapter
(WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the uSB1
(HDD) or uSB2 port on the back of your TV. See the illustration below.
TV Side Panel
The LAN Port on the Wall
Wireless IP sharer
(AP having DHCP Server)
Samsung Wireless
LAN Adapter or
LAN Cable
Samsung Wireless
LAN Adapter
Samsung’s Wireless LAN adapter supports the IEEE 802.11A, IEEE 802.11B, IEEE
802.11G, and IEEE 802.11N wireless communication protocols. For your TV to connect to your network, the wireless router or modem you use must also support one of these protocols. The fastest of these protocols is IEEE 802.11N.
Most wireless network systems incorporate a security system that requires devices that access the network through an access point or AP (typically a wireless modem or router) to transmit an encrypted security code called an access key.
For regular connections, your TV is compatible with the following security protocols:
• Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
• Encryption Type: WEP, TKIP, AES
Configuring the Network Connection - Wireless
Network Connection - Wired
There are two main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below:
The Modem Port on the Wall
The LAN Port on the Wall
Modem Cable
External Modem
(ADSL / VDSL / Cable TV)
LAN Cable
LAN Cable
TV Rear Panel
TV Rear Panel
Configuring the Network Connection - Wired
Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network connections. Home networks that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually.
to configure your network connection for a network that uses DHCP, follow these steps:
The instructions below are for networks that use the Dynamic Host Configuration
Protocol (DHCP) to configure network connections automatically. If your have a
Static IP network, see your user’s manual for configuration instructions.
to configure your network connection for a network that uses DHCP, follow these steps:
1. Connect your TV to your network as shown in the illustrations above.
network Setup
Select a network internet Protocol Setup iP Address
Subnet Mask
Gateway
: not Selected
:
:
:
: Auto
►
2. Turn on your TV, press the
MEnu button on your remote, and the select Setup → network.
3. Set the network type to wireless if it is not already set to wireless.
DnS
DnS Server
: Auto
:
4. Select network Setup. The network
Setup screen appears.
U
Move
E
Enter R Return
5. On the network Setup menu, select an AP(Access Point) and ad hoc network. if you have selected network with a security key, the Security Key screen appears.
6. Enter the Security Key using the numbers on the remote, and then press the Blue button on your remote.
✎ If your network uses WEP security encryption, 0~9 and A~F will be available on the Security Key screen. Use the Direction button on your remote to move to the characters and the enter key to select them.
7. On the network Setup menu, set internet Protocol Setup and
DnS to Auto. The Auto acquires and enters the necessary internet values automatically.
8. Select network test to check internet connectivity.
✎ For more information, see your user’s manual.
Starting Internet@TV
1. Connect your TV to your network as shown in one of the illustrations above.
2. Turn on your TV, press the MEnu button on your remote, and then select Setup → network.
3. Set the network type to wired if it is not already set to wired.
network Setup internet Protocol Setup iP Address
Subnet Mask
Gateway
:
:
:
: Auto
DnS
DnS Server
: Auto
:
►
U
Move
E
Enter R Return
4. Select network Setup. The network Setup screen appears.
5. On the network Setup menu, set internet Protocol Setup and DnS to Auto.
Auto acquires and enters the necessary internet values automatically.
6. Select network test to check Internet connectivity.
✎ Some networks are Static IP networks. If your network is a Static IP network, you can not use DHCP to configure the network connection.
Instead, you must enter the iP Address, Subnet Mask, Gateway, and
DnS Server manually. For instructions explaining how to configure a
Static IP network, see your user’s manual.
to view the on Screen Menus, follow these steps:
1. Turn on your TV, press the
MENU button on your remote, then select Application →
Content View.
2. Press the ◄ or ► button to select internet@tV, and the
EntErE button. The USER
TERMS and PRIVACY POLICY windows appears, then select
Yes.
Samsung Apps Settings recommended
My Applications by Date 1/1
A Login B Mark as Favorite D Sort by R return
3. Follow the directions on your screen to set up internet@tV. For detailed instructions, see your Owner’s
Manual.
✎ For best internet@tV results, your broadband company should provide sustained download speeds of 3.5 mb/sec or more.
Bn68-02617A-02
English - 2
BN68-02617A-Eng.indd 2 2010-08-31 �� 10:07:12
advertisement