Sanyo Katana II User guide

Phone User Guide

KATANA ® II by SANYO ®

Copyright © 2007 SANYO Electric Co., Ltd. All rights reserved. No reproduction in whole or in part without prior written approval. SANYO is a registered trademark of SANYO Electric Co., Ltd. All other trademarks are the property of their respective owners.

Table of Contents

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i

Your Phone’s Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii

Section 1: Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . .1

1A. Setting Up Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Section 2: Using Your Phone . . . . . . . . . . . . . . . . . . . . . . . . .7

2A. Phone Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Viewing the Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Features of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Turning Your Phone On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Using Your Phone’s Battery and Charger . . . . . . . . . . . . . . . . . . . . . . . . .17

Navigating Through Phone Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

2B. Controlling Your Phone’s Settings . . . . . . . . . . . . . . . . . . . .41

Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

TTY Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

2C. Setting Your Phone’s Security . . . . . . . . . . . . . . . . . . . . . . .66

Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Using Your Phone’s Lock Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Using Special Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Erasing Phone Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Resetting the Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Resetting My Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Resetting Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Resetting Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Resetting Your Picture Messaging Account . . . . . . . . . . . . . . . . . . . . . . .74

Security Features for Data Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

2D. Controlling Your Roaming Experience . . . . . . . . . . . . . . . . .75

Understanding Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Setting Your Phone’s Roam Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Using Call Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Using Data Roam Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

2E. Managing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Call History Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83

Making a Call From Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Saving a Phone Number From Call History . . . . . . . . . . . . . . . . . . . . . . . .84

Prepending a Phone Number From Call History . . . . . . . . . . . . . . . . . . . .85

Erasing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

2F. Using Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Assigning a Group Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Finding Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Contacts Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91

Assigning Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

Erasing a Contacts Entry From the List . . . . . . . . . . . . . . . . . . . . . . . . . . .92

Assigning an Image to a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . .93

Assigning a Ringer Type to an Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

Secret Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94

2G. Using the Phone’s Calendar and Tools . . . . . . . . . . . . . . . . .95

Using Your Phone’s Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Using Your Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

Personal Information Management . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

2H. Using Your Phone’s Voice Services . . . . . . . . . . . . . . . . . .106

Using Voice-Activated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

Managing Voice Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Setting Up Screen Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

2I.

Using the Built-in Camera . . . . . . . . . . . . . . . . . . . . . . . . .114

Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

Storing Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

Sending Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125

Managing Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .128

2J. Using Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

Turning Bluetooth On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133

Using the Bluetooth Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .134

Bluetooth Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137

Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138

Using the Trusted Devices Options . . . . . . . . . . . . . . . . . . . . . . . . . . . .139

Sending Data via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140

Section 3: Wireless Service Features . . . . . . . . . . . . . . . . .141

3A. Wireless Service Features: The Basics . . . . . . . . . . . . . . . .142

Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .143

Using SMS Text Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151

Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154

Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

Responding to Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155

Using Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .156

3B. Data Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157

Data Services Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158

Getting Started With Data Services . . . . . . . . . . . . . . . . . . . . . . . . . . . .159

Accessing Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164

Downloading Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .166

Exploring the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168

Section 4: Safety and Warranty Information . . . . . . . . . . .173

4A. Important Safety Information . . . . . . . . . . . . . . . . . . . . . . .174

General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175

Maintaining Safe Use of and Access to Your Phone . . . . . . . . . . . . . . . . .176

Using Your Phone With a Hearing Aid Device . . . . . . . . . . . . . . . . . . . . . .178

Caring for the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .180

Radio Frequency (RF) Energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184

Phone Guide Proprietary Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184

4B. Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . .185

Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .186

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189

Introduction

This Phone User Guide introduces you to wireless service and all the features of your new phone. It’s divided into four sections:

⽧ Section 1: Getting Started

⽧ Section 2: Using Your Phone

⽧

Section 3: Wireless Service Features

⽧

Section 4: Safety and Warranty Information

Throughout this guide, you’ll find tips that highlight special shortcuts and timely reminders to help you make the most of your new phone and service.

The Table of Contents and Index will also help you quickly locate specific information.

You’ll get the most out of your phone if you read each section. However, if you’d like to get right to a specific feature, simply locate that section in the Table of

Contents and go directly to that page. Follow the instructions in that section, and you’ll be ready to use your phone in no time.

WARNING Please refer to the Important Safety Information section on page 174 to learn about information that will help you safely use your phone. Failure to read and follow the Important Safety

Information in this phone guide may result in serious bodily injury, death, or property damage.

i

ii

Your Phone’s Menu

The following table outlines your phone’s list menu structure. For more information about using your phone’s menus, see “Navigating Through

Phone Menus” on page 20.

1: MISSED ALERTS

2: CALL HISTORY

1: O

UTGOING

2: I

NCOMING

3: M

ISSED

4: R

ECENT

C

ALLS

5: E

RASE

H

ISTORY

1: Outgoing

4: Recent Calls

2: Incoming

5: All

3: Missed

3: CONTACTS

1: F

IND

/A

DD

E

NTRY

2: G

ROUP

3: S

PEED

D

IAL

#

S

4: M

Y

N

AME

C

ARD

5: S

ERVICES

1: Customer Service

4: MESSAGING

1: S

END

M

ESSAGE

1: Text

2: T

EXT

3: P

ICTURE

M

SG

2: Dir Assistance

2: Picture

3: Operator

4: V

OICEMAIL

1: Call Voicemail

4: Clear Count

5: S

ETTINGS

1: Notification

2: Call:Speaker On

2: Preset Msgs

3: Details

3: Text

5: MY CONTENT

1: G

AMES

1: Get New

2: R

INGERS

1: Get New

3: S

CREEN

S

AVERS

1: Get New

4: A

PPLICATIONS

1: Get New

2: My Content Manager




6: PICTURES

1: C

AMERA

Press Options (right softkey) and press the navigation key up and down to display the following options:

1: Picture Mode

1: Normal

4: Night/Dark

2: Beach/Snow

5: Soft Focus

3: Scenery

2: Zoom (not available when Resolution is set to High)

3: Self-Timer

1: Off

4: Fun Tools

1: Multiple Shots

4: Color Tone

2: 10 Seconds

2: Stitch Shot

3: 5 Seconds

3: Fun Frames iii

iv

7: WEB

8: TOOLS

1: V

OICE

M

EMO

1: Record

2: B

LUETOOTH

3: C

ALENDAR

4: A

LARM

C

LOCK

5: C

OUNTDOWN

6: S

TOPWATCH

7: W

ORLD

C

LOCK

8: C

ALCULATOR

9: U

PDATE

P

HONE

5: Image Controls

1: Brightness

6: Camera Settings

1: Resolution

4: Status Bar

7: Pictures In Camera

8: Key Guidance

9: User Settings

2: M

Y

P

ICTURES

1: In Camera

2: White Balance

2: Quality

2: Saved to Ph.

3: O

NLINE

A

LBUMS

1: View Albums

4: S

ETTINGS

& I

NFO

1: Auto Delete

2: Upload

2: Account Info

2: List

3: Shutter Sound

3: Screen Call

9: SETTINGS

1: S

OUNDS

1: Ringer Type

1: Incoming Calls

4: Calendar/Alarm

2: Volume

1: Ringer

4: Application

3: Vibrate Pattern

1: Incoming Calls

4: Calendar/Alarm

4: Alerts

1: Service

4: Minute Beep

5: Others

1: Tone Length

4: Power-off Tone

2: D

ISPLAY

1: Backlight

1: Main LCD

2: Power Save Mode

3: Greeting

4: Animation

1: Standby

5: Incoming Calls

1: Preset

4: In Camera

6: Screen Saver

1: Main LCD

7: Clock/Calendar

1: Main LCD

2: Voicemail

2: Advanced Ringer

5: Start-up/Pw-off

2: Voicemail

2: Voicemail

5: Signal Fade

2: Tone Type

5: Voice Prompt

2: Key

2: Outgoing Calls

2: My Content

5: Saved to Phone

2: Sub LCD

2: Sub LCD

3: Messaging

3: Receiver

6: Key Beep

3: Messaging

3: Messaging

3: Start-up Tone

6: Key Press Echo

3: Sub LCD

3: Service Search

3: -Get New

6: Off v

vi

8: Others

1: Font Size

4: Sleep Mode

3: W

EB

1: Enable/Disable Web

2: Net Guard

3: Update Profile

4: L

OCATION

5: B

LUETOOTH

1: Enable/Disable

2: Visibility

3: Voice Priority

4: My Device Name

5: My Device Info

6: M

ESSAGING

1: Notification

2: Preset Msgs

3: Text

1: Send Callback#

4: Drafts Alert

7: S

ECURITY

1: Lock Phone

1: Unlocked

2: Picture Msg

1: Lock Pictures

3: Erase/Reset

1: Erase Ph. Book

4: Erase Voice Data

7: Reset Browser

0: Reset Phone

2: Match Area Code

2: Delivery Receipt

2: Lock Now

2: Reset Picture Msg

2: Erase My Content

5: Erase Voice Tag

8: Reset Favorites

3: Return to Idle

3: Signature

3: On Power-up

3: Erase Pictures

6: Erase Messages

9: Default Settings

4: Others

1: Change Lock

4: Lock Services

8: O

THERS

1: Airplane Mode

2: Roaming

2: Limit Use 3: Special #s

1: Set Mode

3: Text Entry

1: Auto-Capital

4: Default Input

7: Add Word

4: Any Key Answer

5: Auto Answer

1: Hands-free

6: Open/Close Flip

2: Call Guard

2: My Words

5: Auto-Space

8: Help

2: Speakerphone

3: Data Roam Guard

3: Input Language

6: T9 Settings

1: Open

7: Abbrev. Dial

8: Headset Mode

1: Turbo Button

2: Close

2: Ringer Sound

9: TTY

10: Navigation Keys (Default Settings)

1: Left Navigation (Web)

3: Up Navigation (Send Text)

11: Side Key Guard

2: Right Navigation (Alarm Clock)

4: Down Navigation (My Content)

12: Set Time/Date

13: Language

1: English 2: Español vii

viii

9: P

HONE

I

NFO

1: Phone#/User ID

2: Icon Glossary

3: Version

4: Advanced

IN USE MENU

Press Options (right softkey) to display the following options:

1: Flash

4: Three-Way Call

7: Contacts

0: Settings

2: Mute/Unmute

5: Missed Alerts

8: Messaging

3: Speaker On/Speaker Off

6: Call History

9: Tools

Section 1

Getting Started

Section 1A

Setting Up Service

In This Section

⽧ Getting Started (page 3)

⽧

Setting Up Your Voicemail (page 4)

⽧

Getting Help (page 5)

Setting up service on your new phone is quick and easy. This section walks you through the necessary steps to unlock your phone, set up your voicemail, and contact your service provider for assistance with your wireless service.

2 Section 1A: Setting Up Service

Getting Started

Unlocking Your Phone

To unlock your phone, follow these easy steps:

1 . Press

END to turn the phone on.

2.

Press Unlock (left softkey).

Note: To select a softkey, press the key directly below the softkey text that is displayed at the bottom left and bottom right of your phone’s display screen. Softkey actions change according to the screen you’re viewing and will not be displayed if there is no corresponding action available.

Tip:

3.

Enter your four-digit lock code. (For security purposes, the code is not visible as you type.)

If you can’t recall your lock code, try using the last four digits of your wireless phone number or try 0000. If neither of these works, contact your service provider.

Section 1A: Setting Up Service 3

Setting Up Your Voicemail

All unanswered calls to your phone are automatically transferred to your voicemail, even if your phone is in use or turned off. Therefore, you will want to set up your voicemail and personal greeting as soon as your phone is activated.

To set up your voicemail:

1.

From standby mode, press and hold .

2.

Follow the system prompts to:

䡲 Create your passcode.

䡲 Record your name announcement.

䡲 Record your greeting.

䡲 Choose whether to activate One-Touch Message Access (a feature that lets you access messages simply by pressing and holding passcode).

, bypassing the need for you to enter your

Note: Voicemail Passcode

If you are concerned about unauthorized access to your voicemail account, it is recommended that you enable your voicemail passcode.

(Do not activate One-Touch Message Access.)

For more information about using your voicemail, see “Using Voicemail” on page 143.

4 Section 1A: Setting Up Service

Getting Help

Directory Assistance

Call Directory Assistance from your phone and you’ll have access to a variety of services and information, including residential, business, and government listings. There is a per-call charge to use Directory Assistance, and you will be billed for airtime.

To call Directory Assistance:

䊳 Press .

Operator Services

Operator Services provides assistance when placing collect calls or when placing calls billed to a local telephone calling card or third party.

To access Operator Services:

䊳 Press .

For more information, please contact your service provider.

Section 1A: Setting Up Service 5

6

Section 2

Using Your Phone

Section 2A

Phone Basics

In This Section

⽧ Your Phone (page 9)

⽧

Viewing the Display Screen (page 12)

⽧

Features of Your Phone (page 14)

⽧

Turning Your Phone On and Off (page 16)

⽧

Using Your Phone’s Battery and Charger (page 17)

⽧

Navigating Through Phone Menus (page 20)

⽧

Displaying Your Phone Number (page 21)

⽧ Making and Answering Calls (page 22)

⽧ Entering Text (page 36)

Your phone is packed with features that simplify your life and expand your ability to stay connected to the people and information

that are important to you. This section will guide you through the basic functions and calling features of your phone.

8 Section 2A: Phone Basics

Your Phone

1. Earpiece

2. Main LCD (display)

3. Navigation Key

4. Left Softkey

5. MENU/OK Key

6. Camera Key

7. TALK Key

8. Microphone

16. Camera

Lens

17. LED

Indicator

18. Sub LCD

20. Speaker

21. Headset Jack

22. Side Volume

Key

15. Side Camera Key

14. Charger Jack

13. Right Softkey

12. BACK Key

11. END/POWER Key

10. SPEAKER Key

9. Keypad

19. Internal

Antenna

Section 2A: Phone Basics 9

Key Functions

1.

Earpiece lets you hear the caller and automated prompts.

2.

Main LCD (display) displays all the information needed to operate your phone, such as the call status, the Contacts list, the date and time, the signal and battery strength, etc.

3.

Navigation Key allows you to scroll through menus quickly and easily.

These keys can also be reassigned to create customized shortcuts.

4.

Left Softkey lets you select softkey actions or menu items corresponding to the bottom left line on the Main LCD.

5.

MENU/OK Key lets you access the phone’s menus and selects the highlighted choice when navigating through a menu.

6.

Camera Key lets you access the Pictures menu and take pictures.

7.

TALK Key allows you to place or receive calls, answer Call Waiting, use

Three-Way Calling, or activate Voice Dial.

8.

Microphone allows other callers to hear you clearly when you are speaking to them.

9.

Keypad lets you enter numbers, letters, and characters, and navigate within menus. Press and hold keys 2–9 for speed dialing.

10.

SPEAKER Key lets you place or receive calls in speakerphone mode.

11.

END/POWER Key lets you turn the phone on or off, end a call, or return to standby mode. While in the main menu, it returns the phone to standby mode and cancels your input. When you receive an incoming call, press to enter silent mode and mute the ringer.

12.

BACK Key deletes characters from the display in text entry mode. When in a menu, pressing the Back key returns you to the previous menu.

13.

Right Softkey lets you select softkey actions or menu items corresponding to the bottom right line on the Main LCD.


14.

Charger Jack connects the phone to the phone charger (included) or an optional USB Cable.

15.

Side Camera Key lets you access the camera mode and take pictures.

16.

Camera Lens, as part of the built-in camera, lets you take pictures.

17.

LED Indicator shows your phone’s connection status at a glance.

18.

Sub LCD lets you monitor the phone’s status and see who’s calling without opening the phone.

19.

Internal Antenna facilitates reception and transmission. To maximize call performance, do not obstruct the internal antenna area. (See page 22.)

20.

Speaker lets you hear the different ringers and sounds. You can also hear the caller’s voice in speakerphone mode.

21.

Headset Jack allows you to plug in an optional headset for convenient, hands-free conversations (for monaural headset only).

CAUTION! Inserting an incorrect accessory into the headset jack may damage the phone.

22.

Side Volume Key allows you to adjust the ringer volume in standby mode (with the phone open) or adjust the voice volume during a call.

The side volume key can also be used to scroll up or down to navigate through the different menu options. Press and hold to make a voice dial or to redial with the phone closed.


Viewing the Display Screen

Your phone’s display screen provides a wealth of information about your phone’s status and options. This list identifies the symbols you’ll see on your phone’s display screen:

Tip: To view a list of your phone’s icons and descriptions, from the main menu select Settings > Phone Info > Icon Glossary .

shows your current signal strength. The more lines you have, the stronger your signal.

means your phone cannot find a signal.

indicates a call is on hold.

tells you a call is in progress.

indicates data service is active.

indicates data service access is dormant.

indicates data service access is disabled.

indicates you are “roaming” off the home network.

indicates you have missed voice calls.

indicates you have scheduled events or call alarms.

indicates you have alarm clock or countdown notifications.

indicates you have new SMS Text messages.

indicates you have new voicemail messages.

indicates you have new picture messages.

indicates you have urgent messages.

indicates you have missed calls and alert notifications, such as scheduled events, call alarms, alarm clock, or countdown.

indicates the Bluetooth feature is enabled (blue icon).


indicates the handset is discoverable by another Bluetooth device.

indicates the handset is connected to a Bluetooth device

(green icon).

indicates the handset is communicating with a Bluetooth device.

indicates access to a secure site.

indicates battery charge level (icon shown is full). The more black you see, the more power you have left (icon is animated while charging).

shows your battery is charging in “Power Off” state.

indicates volume level (1 to 8) with vibrate is set.

indicates 1-beep feature is set.

indicates 1-beep and vibrate feature are set.

indicates all ringer settings are off.

indicates all ringer settings are off and the vibrate feature is set.

indicates all the sound settings except Application Volume are off, and the vibrate feature is set.

indicates all the sound settings are off.

indicates the Location feature of your phone is enabled.

indicates the Location feature of your phone is disabled.

indicates you have a new voice message when Screen Call is activated.

indicates the Screen Call Auto setting is on.

indicates your phone is in TTY mode.

indicates the alarm clock or countdown setting is on.

indicates the speakerphone mode is set to on.


indicates a call is in progress using the Bluetooth device.

indicates the wired Car kit device is set to on.

indicates the wired Headset device is set to on.

Note: Display indicators help you manage your roaming charges by letting you know when you’re off the home network. (For more information, see

Section 2D: Controlling Your Roaming Experience on page 75.)

Features of Your Phone

Congratulations on the purchase of your phone. The KATANA II by SANYO is lightweight, easy-to-use, and reliable, and it also offers many significant features and service options. The following list previews some of those features and provides page numbers where you can find out more:

䢇 Digital dual-band capability allows you to make and receive calls while on the home network and to roam on other 1900 and 800 MHz digital networks where roaming agreements have been implemented

(page 75).

䢇 Data services provide access to the wireless Internet in digital mode

(page 157).

䢇 SMS Text Messaging (page 151) provides quick and convenient messaging capabilities.

䢇 Games, ringers, screen savers, and other applications can be downloaded to make your phone as unique as you are (page 166).

Additional charges may apply.

䢇 Your Contacts list allows you to store up to 300 entries, with up to seven phone numbers per entry (page 86).

䢇 The built-in Calendar offers several personal information management features to help you manage your busy lifestyle (page 96).


䢇 Your phone is equipped with a Location feature for use in connection with location-based services (page 53).

䢇 Your phone’s Sub LCD display allows you to monitor the phone’s status and to see who’s calling without opening the phone (page 9).

䢇 T9 Text Input lets you quickly type messages with one keypress per letter (page 37).

䢇 Speed dial lets you dial phone numbers stored in your Contacts directory with one key press (page 35).

䢇 The built-in camera allows you to take full-color digital pictures, view your pictures using the phone's display, and instantly send them to family and friends using Picture Messaging (page 114).

䢇 The built-in Bluetooth technology allows you to connect wirelessly to a number of Bluetooth devices to share information more easily than ever before (page 132).


Turning Your Phone On and Off

Turning Your Phone On

To turn your phone on:

䊳

Once your phone is on, it may display “Looking for service...,” which indicates that your phone is searching for a signal. When your phone finds a signal, it automatically enters standby mode – the phone’s idle state. At this point, you are ready to begin making and receiving calls.

If your phone is unable to find a signal after 15 minutes of searching, a

Power Save feature is automatically activated. When a signal is found, your phone automatically returns to standby mode.

In Power Save mode, your phone searches for a signal periodically without your intervention. You can also initiate a search for service by pressing any key (when your phone is turned on).

Tip: The Power Save feature helps to conserve your battery power when you are in an area where there is no signal.

Turning Your Phone Off

To turn your phone off:

䊳 Press and hold

END for two seconds until you see the powering down animation on the display screen.

Your screen remains blank while your phone is off (unless the battery is charging).


Using Your Phone’s Battery and Charger

WARNING Use only manufacturer-approved batteries and chargers with your phone. The failure to use a manufacturer-approved battery and charger may increase the risk that your phone will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage.

Battery Capacity

Your phone is equipped with a Lithium Ion (Li-Ion) battery. It allows you to recharge your battery before it is fully drained. The battery provides up to 3.5

hours of continuous digital talk time.

When there are approximately five minutes of talk time left, the phone sounds an audible alert and then powers down.

Note: Long backlight settings, searching for service, vibrate mode, browser use, and other variables may affect the battery’s talk and standby times.

Tip: Be sure to watch your phone’s battery level indicator and charge the battery before it runs out of power.


Installing the Battery

To install the Li-Ion battery:

䊳 To install, insert the battery into the opening on the back of the phone and gently press down until the latch snaps into place.

1

2

Removing the Battery

WARNING Do not handle a damaged or leaking Li-Ion battery as you can be burned.

To remove your battery:

1.

Make sure the power is off so that you don’t lose any stored numbers or messages.

2.

Press the battery release latch down and remove the battery from the phone at a 45-degree angle.

2

1


Charging the Battery

Your phone’s Li-Ion battery is rechargeable and should be charged as soon as possible so you can begin using your phone.

Keeping track of your battery’s charge is important. If your battery level becomes too low, your phone automatically turns off, and you will lose all the information you were just working on. For a quick check of your phone’s battery level, glance at the battery charge indicator located in the upperright corner of your phone’s display screen. If the battery charge is getting too low, the battery icon ( ) appears and the phone displays a warning message.

Always use a manufacturer-approved desktop charger, travel charger, or vehicle power adapter to charge your battery.

WARNING Using the wrong battery charger could cause damage to your phone and void the warranty.

Using the Phone Charger

To use the phone charger provided with your phone:

1.

Plug the phone charger into a wall outlet.

2.

Open the cover of the charger jack located on the side of your phone.

3.

Plug the other end of the phone charger (with the white triangle marks facing up) into the charger jack.

With the manufacturer-approved Li-Ion battery, you can recharge the battery before it becomes completely run down.


Navigating Through Phone Menus

The navigation key on your phone allows you to scroll through menus quickly and easily. The scroll bar to the right of the menu keeps track of your position in the menu at all times.

To scroll through a menu, press the navigation key up or down. If you are in a first-level menu (after selecting an item in the main menu), you may also navigate to the previous or next first-level menu by pressing the navigation key left or right.

For a diagram of your phone’s menu, please see “Your Phone’s Menu” on page ii.

Selecting Menu Items

As you navigate through the menu, menu options are highlighted. In the List

View, select any numbered option by simply pressing the corresponding number on the phone’s keypad. You may also select any item by highlighting it and pressing .

For example, if you want to view your last incoming call:

1.

Press to access the main menu.

2.

Select Call History (when in List View) by pressing highlighting it and pressing .

or by

3.

Select Incoming by pressing or by highlighting it and pressing

. (If you have received any calls, they are displayed on the screen.)

Note: For the purposes of this guide, the above steps condense into

“Press MENU > Call History > Incoming .”


Backing Up Within a Menu

To go to the previous menu:

䊳 Press .

To return to standby mode:

䊳 Press .

END

Displaying Your Phone Number

Just in case you forget your phone number, your phone can remind you.

To display your phone number:

䊳 Press > Settings > Phone Info > Phone#/User ID.

(Your phone number and other information about your phone and account will be displayed.)

Tip: You can also display your phone number through the Contacts menu.

Press MENU > Contacts > My Name Card . To send your contact information using Bluetooth, press Options (right softkey) >

Send via Bluetooth .

Note: To select menu options (such as Settings , above), highlight the option and press MENU . (If the menu options are numbered, you may also select an option simply by pressing the corresponding number key.)


Making and Answering Calls

Holding Your Phone

To maximize performance, do not obstruct the bottom portion of your phone where the internal antenna is located while using the phone.

Correct Incorrect

Internal Antenna

Making Calls

Placing a call from your phone is as easy as making a call from any landline phone. Just enter the number, press , and you’re on your way to clear calls.

To make a call using your keypad:

1.

Make sure your phone is on.

2.

Enter a phone number from standby mode. (If you make a mistake while dialing, press to erase one digit at a time. Press and hold to erase the entire number.)

3.

Press . (To make a call when you are roaming and Call Guard is enabled, see “Using Call Guard” on page 79.)

4.

Press

END or close the phone when you are finished.


Tips: To redial your most recent call (outgoing, incoming, or missed), press

TALK twice.

When making calls off the home network, always dial using 11 digits

(1 + area code + phone number).

You can also place calls from your phone by speed dialing numbers from your Contacts (page 35), by using your Call History listings (page 84), and by using Voice-Activated Dialing (page 107).

To place a call with the phone closed:

1.

Make sure your phone is on.

2.

Press and hold the side volume key.

3.

Follow the system prompts. (The call will be made in speakerphone mode, unless you have a headset attached to the phone.)

䊳 Say the name of your registered Voice Dial entry (see the note below).

Tip: This function is available only when the Side Key Guard setting is off. (See

“Setting the Side Key Guard” on page 63.)

Note: To use a Voice Dial, you must have stored Voice Dial entries. (See

“Programming Voice Dial Tags” on page 108.)


Dialing Options

When you enter numbers in standby mode, press Options (right softkey) to display the following dialing options.

To initiate an option, highlight it and press .

䢇 Abbrev. Dial to dial the phone number in your Contacts list that ends with the digits you entered. (See “Setting Abbreviated Dialing” on page 64.)

䢇 Call to dial the phone number.

䢇 Call: Speaker On to dial the phone number in speakerphone mode.

䢇 Send Message to send an SMS Text message (page 151) or a

Picture message (page 125).

䢇 Save Phone# to save the phone number in your Contacts list.

(See “Saving a Phone Number” on page 32.)

䢇 Find to display Contacts list entries that end with the digits you entered.

(See “Finding a Phone Number” on page 33.)

䢇 Hard Pause (P) to insert a hard pause. (See “Dialing and Saving Phone

Numbers With Pauses” on page 33.)

䢇 2-Sec. Pause (T) to insert a two-second pause. (See “Dialing and

Saving Phone Numbers With Pauses” on page 33.)

䢇 Hyphen to insert a hyphen. (Hyphens are generally for visual appeal only; they are not necessary when entering numbers.)

Tip: To speed dial a phone number, press and hold the appropriate speed dial key (locations 2-9). See “Assigning Speed Dial Numbers” on page 92.


Answering Calls

To answer an incoming call with the phone open:

1.

Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.)

2.

Press to answer an incoming call. (Depending on your phone’s settings, you may also answer incoming calls by opening the phone or by pressing any number key. See “Setting the Open/Close Flip

Option” on page 62 and “Setting Any Key Answer” on page 63 for more information.)

To answer an incoming call with the phone closed:

1.

Make sure your phone is on. (If your phone is off, incoming calls go to voicemail.)

2.

When your phone rings or vibrates, press and hold the side volume key. (The call will be answered in speakerphone mode.)

– or –

Open the phone to use the earpiece.

Note: If the setting for Open Flip is set to “No Action,” opening the phone will not answer the call. (See “Setting the Open/Close Flip Option” on page 62.)

Your phone notifies you of incoming calls in the following ways:

䢇 The phone rings or vibrates.

䢇 The indicator light flashes.

䢇 The backlight illuminates.

䢇 The screen displays an incoming call message.


If the incoming call is from a number stored in your Contacts, the entry’s name is displayed. The caller’s phone number may also be displayed, if available.

When receiving a call, the following options are also displayed by pressing

Options (right softkey). To select an option, highlight it and press .

䢇 Call Guard to answer the call when you are in roaming mode.

(See “Using Call Guard” on page 79.)

䢇 Answer or Answer:Speaker to answer the call.

䢇 Select Audio to switch the call to your desired device (if available).

䢇 Answer on Hold to put the call on hold.

䢇 Screen Call to answer the call by using a prerecorded announcement.

(See “Setting Up Screen Call” on page 111.)

䢇 Quiet Ringer to mute the ringer (if available).

Answering a Roam Call With Call Guard Enabled

Call Guard is an option that helps you manage your roaming charges when making or receiving calls while outside the home network. Please see

Section 2D: Controlling Your Roaming Experience for more information about roaming.

To answer a call when you are roaming and Call Guard is enabled:

1.

Press .

2.

Press to proceed while the pop-up message is displayed.

Note: When your phone is off, incoming calls go directly to voicemail.


Ending a Call

To disconnect a call when you are finished:

䊳 Close the phone or press

END

.

Note: If the setting for Close Flip is not set to “End,” closing the phone will not end the call. (See “Setting the Open/Close Flip Option” on page 62.)

Changing the Ringer Volume

To change the ringer volume, use the side volume key when the phone is open and in standby mode.

Note: To change the ringer volume from the main menu, see “Adjusting the

Phone’s Volume Settings” on page 45.

Adjusting Volume During a Conversation

When you need to adjust the receiver volume during a conversation, use the side volume key, or press the navigation key up or down while a call is in progress.

Missed Call Notification

When an incoming call is not answered, the Missed Call log is displayed on your screen.

To call the Missed Call entry from the notification screen:

䊳 Press Call (left softkey).

To display a Missed Call entry from standby mode:

1.

Press > Missed Alerts.

2.

Highlight the entry you wish to view and press .


Calling Emergency Numbers

You can place calls to 911 (dial is locked or your account is restricted.

), even if your phone

Note: When you place an emergency call, your phone automatically enters

Emergency mode.

During an emergency call, press Options (right softkey) to display your options. Select an option and press .

䢇 Speaker On to activate speakerphone mode. (If you are already in speakerphone mode, Speaker Off will be displayed.)

䢇 Unlock Phone to unlock your phone (appears only if the phone is locked).

䢇 Close Menu to close the pop-up menu (appears only if the phone is unlocked).

Tip: Press My Phone (left softkey) to display your phone number during an emergency call.

To exit Emergency mode:

1.

Press

END to end a 911 call.

2.

Press Options (right softkey) to display the options menu.

3.

Highlight Exit Emergency and press .

Note: When you are in Emergency mode, you can exit only from the options menu.


To select Emergency mode options:

1.

Press to end a 911 call.

END

2.

Press Options (right softkey).

䡲 Call 911 to call 911.

䡲 Call 911: Speaker to call 911 in speakerphone mode.

䡲 Exit Emergency to exit Emergency mode.

3.

Highlight an option and press .

Enhanced 911 (E911) Information

This phone features an embedded Global Positioning System (GPS) chip necessary for utilizing E911 emergency location services where available.

When you place an emergency 911 call, the GPS feature of your phone begins to seek information to calculate your approximate location.

Depending on several variables, including availability and access to satellite signals, it may take up to 30 seconds or more to determine and report your approximate location.

IMPORTANT Always report your location to the 911 operator when placing an emergency call.

Some designated emergency call takers, known as Public Safety Answering Points (PSAPs) may not be equipped to receive GPS location information from your phone.


In-Call Options

Pressing Options (right softkey) during a call displays a list of features you may use during the call. To select an option, press the corresponding keypad number or highlight the option and press . The following options are available through the Options menu:

䢇

䢇

Flash to answer an incoming Call Waiting call or to connect a third party during Three-Way Calling.

Mute or Unmute to mute or reactivate your phone’s microphone.

䢇

䢇

Transfer Audio to switch the call to an external device (if applicable).

Speaker On or Speaker Off routes the phone’s audio through the speaker or through the earpiece.

䡲 Select Speaker On to route the phone’s audio through the speaker. (You can adjust the speaker volume using the side volume key.)

䡲 Select Speaker Off to use the phone’s earpiece.

WARNING Because of higher volume levels, do not place the phone near your ear during speakerphone use.

䢇

䢇

䢇

䢇

Three -Way Call to call a third party.

Missed Alerts to display missed notifications.

Call History to access the Call History menu.

䢇

Contacts to access the Contacts menu.

Messaging to access the Messaging menu.

䢇

䢇

Tools to access the Tools menu.

Settings to access the Settings menu.

Tip: During a call, both the left softkey and the Side Camera key function as the Mute key. Press either one to mute the phone’s microphone for privacy. Press it again to unmute the phone.


End-of-Call Options

To display the following options, press Options (right softkey) within

10 seconds after disconnecting a call. To select an option, highlight it and press .

䢇 Call Again to dial the phone number.

䢇

䢇

Call:Speaker On to dial the phone number in speakerphone mode.

Send Message to send a Text or Picture message.

䢇 Save Phone# to save the phone number in your Contacts list.

䡲 Go to Phone Book is displayed when the number is already in your Contacts list.

䢇 Rename to change the current entry’s name to the Caller ID name (if applicable).

Note: The End-of-Call options are not displayed for calls identified as

No Caller ID or Restricted.


Saving a Phone Number

Your phone can store up to 300 Contacts entries. Contacts can store up to a total of 500 phone numbers, and each Contacts entry’s name can contain up to 32 characters. Your phone automatically sorts the Contacts entries alphabetically. (For more information, see Section 2F: Using Contacts on page 86.)

To save a number from standby mode:

1.

Enter a phone number and press Options (right softkey) >

Save Phone#.

2.

Select New Name to create a new Contacts entry for the number or

From Ph. Book to save the number to an existing entry. (This step is not necessary on the very first entry in your Contacts.)

3.

Select a label and press .

4.

Enter a name for the new entry using the keypad and press .

– or –

Search for an existing contact name and press to save the new number.

5.

Press Save (left softkey) to save the entry.

6.

Press Done (left softkey) to return to standby mode.


Finding a Phone Number

You can search Contacts entries for phone numbers that contain a specific string of numbers.

To find a phone number:

1.

Enter the last four or more digits of the number in standby mode. (The more numbers you enter, the more specific the search becomes.)

2.

Press Options (right softkey) > Find. (The Contacts entry matching the entered numbers will be displayed.)

3.

To display the Contacts entry that contains the phone number you entered, highlight the entry and press . To dial the number, press .

Dialing and Saving Phone Numbers With Pauses

You can dial or save phone numbers with pauses for use with automated systems, such as voicemail or credit card billing numbers.

There are two types of pauses available on your phone:

䢇 Hard Pause sends the next set of numbers when you press .

䢇 2-Sec. Pause automatically sends the next set of numbers after two seconds.

Note: You can have multiple pauses in a phone number and combine twosecond and hard pauses.


To dial or save phone numbers with pauses:

1.

Enter the phone number.

2.

Press Options (right softkey) and select either Hard Pause or

2-Sec. Pause. (Hard pauses are displayed as a “P” and two-second pauses as a “T.”)

3.

Enter additional numbers.

4.

Press to dial the number.

– or –

Press Options (right softkey) > Save Phone# to save the number in your Contacts.

Note: When dialing a number with a hard pause, press TALK to send the next set of numbers.

Plus (+) Code Dialing

When placing international calls, you can use Plus Code Dialing to automatically enter the international access code for your location

(for example, 011 for international calls made from the United States).

This feature is subject to network availability.

To make a call using Plus Code Dialing:

1.

Press and hold until a “+” is displayed on your phone display.

2.

Dial the country code and phone number you’re calling, and press

. (The access code for international dialing will automatically be dialed, followed by the country code and phone number.)


Dialing From the Contacts List

To dial directly from a Contacts entry:

1.

Press > Contacts > Find/Add Entry.

Shortcut: From the standby mode, press Contacts (right softkey) to display the Contacts list.

2.

Highlight the entry you want to call and press default phone number.

to dial the entry’s

– or –

To dial another number from the entry, highlight the name and press

, and then highlight the number you wish to call and press .

Using Speed Dialing

With this feature, you can dial your favorite entries using one keypress for locations 2–9. (See “Assigning Speed Dial Numbers” on page 92.)

To use speed dial :

䊳 From standby mode, press and hold the appropriate key for approximately two seconds. The display confirms that the number has been dialed when it shows “Connecting...”.

Note: Speed dialing may not be available when you are roaming; when you are roaming off the home network, you must always dial using 11 digits

(1 + area code + number).


Entering Text

Selecting a Character Input Mode

Your phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when using picture messaging and SMS Text

Messaging).

To change the character input mode:

1.

When you display a screen where you can enter text, press Mode

(right softkey) to change the character input mode.

2.

Select one of the following options:

Note: The menus displayed vary according to the entry field. If you see triangles on the right of the menu, you can press the right and left navigation keys to switch between related menus.

䡲 T9 Word to enter characters using predictive T9 Text Input.

(See page 37.)

䡲 Alphabet to enter characters by using the Alphabet mode.

(See page 40.)

䡲 SYMBOL to enter symbols.

䡲 SMILEYS to enter smile icons.

䡲 Emoticons to enter “emoticons.”

䡲 Web Shortcuts to enter Web shortcuts (for example, www., http://, or .com).

䡲 Preset Messages to enter preset messages. (See page 55.)

䡲 Recent Messages to enter messages used recently.

䡲 Paste to paste copied or cut text (if applicable).

䡲 NUMBER to enter numbers.


Tip:

䡲 Signature to enter your signature. (See page 56.)

䡲 Select Language to select the language (English or Spanish).

䡲 Erase All to erase all text (if applicable).

䡲 Select Text to select stored text for copying or cutting.

䡲 Add Word to store words that you use frequently. (See page 38.)

䡲 Text Options to display the Text Entry settings menu.

When entering text, press [ Shift* ] to change the capitalization style ( ABC

> abc > Abc ).

Entering Characters Using T9 Text Input

T9 Text Input lets you enter text in your phone with just one keypress per letter. (To select the T9 Word mode when entering text, see “Selecting a

Character Input Mode” on page 36.)

T9 Text Input analyzes the letters you enter using an intuitive word database and creates a suitable word. (The word may change as you type.)

To enter a word using T9 Text Input:

1.

Select the T9 Word character input mode. (See “Selecting a

Character Input Mode” on page 36.)

2.

Press the corresponding key once for each letter of the word. (For example, to enter the word “Bill,” press

(If you make a mistake, press to erase a single character.

.)

Press and hold to erase an entire word.)

3.

To accept a word and insert a space, press .


Adding a Word to the T9 Database

If a word you want to enter is not displayed as an option when you are using

T9 Text Input, you can add it to the database.

To add a word to the T9 Text Input database:

1.

Select the Add Word input mode. (See “Selecting a Character Input

Mode” on page 36.)

2.

Enter the word using Alphabet mode (multi-tap key entry) and press

Save (left softkey). (See “Entering Characters Using Alphabet Mode” on page 40.) The word will appear as an option the next time you scroll through options during T9 Text Input.

To edit or erase the words you have added:

1.

Press > Settings > Others > Text Entry > My Words.

2.

Select a word and press Options (right softkey).

3.

To select an option, highlight it and press .

䡲 Edit to edit a word in My Words.

䡲 Erase to erase a word in My Words.


Customizing the T9 Settings

To customize the T9 Settings:

1.

Press > Settings > Others > Text Entry > T9 Settings.

2.

Select an option and press .

䡲 Next WordPrediction to automatically display the word that may follow the current text input.

䡲 Word Completion to show the completed words that match the keys you have entered without entering the whole word.

䡲 Word Scan to allow T9 text input to recognize words by searching Phone Book and messages.

䡲 Word Choice List to display the word choice list.

䡲 Show after enter to select when (after 1-3 digits) to display the word choice list. The word choice list will be displayed based on the number of digits you selected.

䡲 Show after wait to select how many seconds the phone should wait to display the word choice list.

For more information about T9 Text Input, visit the Tegic Web site at www.T9.com

.


Entering Characters Using Alphabet Mode

To enter characters using Alphabet mode (multi-tap key entry):

1.

Select the Alphabet mode. (See “Selecting a Character Input Mode” on page 36.)

2.

Press the corresponding key repeatedly until the desired letter appears. (For example, to enter the word “Bill,” press twice, three times, three times, and then press three times again.) (If you make a mistake, press to erase a single character. Press and hold to delete an entire word.)

By default, the first letter of an entry is capitalized and the following letters are lowercased. After a character is entered, the cursor automatically advances to the next space after two seconds or when you enter a character on a different key.

Characters scroll in the following order:

Key

ABC

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

Space

Shift

English Sequence

Upper Case Lower Case

. , @ 1 ? ! * # /

A B C 2

D E F 3

G H I 4

J K L 5

M N O 6

P Q R S 7

T U V 8

W X Y Z 9 a b c 2 d e f 3 g h i 4 j k l 5 m n o 6 p q r s 7 t u v 8 w x y z 9

0

Space

One-character- shifted Caps Lock Unshifted

Tip: The initial letters of words following spaces can be either upper- or lowercase depending on shift mode. You can change the shift mode by pressing the Shift/ * (asterisk) key.


Section 2B

Controlling Your Phone’s Settings

In This Section

⽧ Sound Settings (page 42)

⽧

Display Settings (page 48)

⽧

Location Settings (page 53)

⽧

Messaging Settings (page 54)

⽧

Airplane Mode (page 57)

⽧

TTY Use (page 58)

⽧

Phone Setup Options (page 59)

Using the available menu options, you can customize your phone to

sound, look, and operate just the way you want it to. This section describes how you can change your phone’s settings to best suit your needs.

Take a few moments to review these options and to adjust or add settings that are right for you.

Section 2B: Controlling Your Phone’s Settings 41

Sound Settings

Ringer Types

Ringer types help you identify incoming calls and messages. You can assign ringer types to individual Contacts entries, types of calls, and types of messages.

䢇 Preprogrammed Ringers include a variety of standard ringer types and familiar music.

䢇 Vibrating Ringer alerts you to calls or messages without disturbing others.

䢇 Downloaded Ringers can be downloaded right to your phone.

(See “Downloading Content” on page 166.)

Selecting Ringer Types for Incoming Calls

Your phone provides a variety of ringer options that allow you to customize your ring and volume settings. These options allow you to identify incoming calls by the ring.

To select a ringer type for incoming calls:

1.

Press > Settings > Sounds > Ringer Type >

Incoming Calls.

2.

Select With Caller ID or No Caller ID. (The list of preprogrammed ringers will be displayed.)

3.

Select a ringer type (Single Tones, Ring Tones, or Melodies) or

My Content, and press .

4.

Use your navigation key to scroll through the available ringers. A sample ringer will sound as you highlight each option.

5.

Press to assign a ringer.

42 Section 2B: Controlling Your Phone’s Settings

Selecting Ringer Types for Incoming Calls While Roaming

To select a ringer type for incoming calls while roaming:

1.

Press > Settings > Sounds > Ringer Type >

Incoming Calls > Roaming.

2.

Select Normal or Distinctive and press .

Selecting Ringer Types for Voicemail, Messaging, or

Calendar/Alarm

To select a ringer type for voicemail, messaging, or calendar/alarm:

1.

Press > Settings > Sounds > Ringer Type.

2.

Select Voicemail, Messaging, or Calendar/Alarm.

3.

Select a ringer type (Single Tones, Ring Tones, or Melodies) or

My Content, and press .

4.

Use your navigation key to scroll through the available ringers. A sample ringer will sound as you highlight each option.

5.

Press to assign a ringer.

Selecting a Vibrate Pattern

With this feature, you can select a vibrate pattern for incoming calls, messages, and alarms.

To select a vibrate pattern:

1.

Press > Settings > Sounds > Vibrate Pattern.

2.

Select Incoming Calls, Voicemail, Messaging, or

Calendar/Alarm.

䡲 Incoming Calls: select With Caller ID, No Caller ID, or

Roaming.

䡲 Messaging: select Text or Picture Msg.

3.

Use your navigation key to select a vibrate pattern and press .


Selecting a Tone Length

Your phone offers two options for selecting the audible tones accompanying a keypress. (Longer tone lengths may be better for tone recognition when dialing voicemail or other automated systems.)

To select a tone length:

1.

Press > Settings > Sounds > Others > Tone Length.

2.

Select Short or Long.

Setting a Start-up/Power-off Tone

To set a start-up/power-off tone:

1.

Press > Settings > Sounds > Others.

2.

Select Start-up Tone or Power-off Tone.

3.

Scroll to a tone and press .

Using the Voice Prompt

This feature allows you to hear voice prompts when using Voice-activated dialing, Voice Memo, Screen Call setting, etc. (The default setting is Off.)

To enable or disable voice prompts:

1.

Press > Settings > Sounds > Others > Voice Prompt.

2.

Select On or Off.

Tip: When the ringer volume is set to “Silence All,” voice prompts cannot be heard.


Selecting a Tone Type

This setting allows you to to select the type of key beep tone.

To select a type of key beep tone:

1.

Press > Settings > Sounds > Others > Tone Type.

2.

Select a tone type and press .

Setting Up Key Press Echo

With this feature, you can hear a voice say the numbers when you press the keypad. This feature is available when you are in standby mode.

To turn Key Press Echo on or off:

1.

Press > Settings > Sounds > Others > Key Press Echo.

2.


Adjusting the Phone’s Volume Settings

You can adjust your phone’s volume settings to suit your needs and your environment.

Adjusting the Ringer Volume

To adjust the ringer volume:

1.

Press > Settings > Sounds > Volume > Ringer.

2.

Using the navigation key, choose a volume level and press Done

(left softkey).

䡲 You can make the ringer vibrate at any volume level by checking the box next to Always Vibrate.

Tip: You can adjust the ringer volume in standby mode (or the earpiece volume during a call) by using the side volume key.


Adjusting the Alert Volume

This setting controls the alert volume for Voicemail, Messaging, and

Calendar/Alarm. You can set the alert volume separately from the ringer volume setting.

To adjust the alert volume:

1.

Press > Settings > Sounds > Volume > Advanced Ringer.

2.

Select Voicemail, Messaging, or Calendar/Alarm.

3.

Using the navigation key, select Separate Vol.

4.

Press the navigation key right or left to choose a volume level, and press Done (left softkey).

Adjusting the Phone’s Receiver Volume

To adjust the receiver volume:

1.

Press > Settings > Sounds > Volume > Receiver.

2.

Select either Earpiece or Speaker.

3.

Using the navigation key, choose a volume level, and press Done (left softkey).

Adjusting the Application, Start-up/Power-off, or Key Beep

Volume

To adjust the Application, Start-up/Power-off, or Key Beep volume:

1.

Press > Settings > Sounds > Volume.

2.

Select Application, Start-up/Pw-off, or Key Beep.

3.

Using the navigation key, choose a volume level, and press Done

(left softkey).


Alert Notification

Your phone can alert you with an audible tone when you change service areas, once a minute during a voice call, when there are incoming messages or voicemail, or when your network signal is fading.

To set alerts:

1.

Press > Settings > Sounds > Alerts.

2.

Select Service, Voicemail, Messaging, Minute Beep, or

Signal Fade and press .

3.

Use your navigation key to select a setting and press .

Silence All

There may be times when you need to silence your phone entirely. The phone’s Silence All option allows you to mute all sounds without turning your phone off.

To activate Silence All:

䊳 With the phone open, press the side volume key down repeatedly in standby mode. (The screen will display “Silence All.”)

Tip: You can also select Vibrate All to set your phone to vibrate only (all sounds will be muted).

To deactivate Silence All:

䊳 With the phone open, press the side volume key up repeatedly to select a volume level.


Display Settings

Changing the Text Greeting

The text greeting can be up to 15 characters and is displayed on your phone’s screen in standby mode. You may enter your own custom greeting or choose the preset greeting.

To display or change your greeting:

1.

Press > Settings > Display > Greeting > Custom.

2.

Enter a custom greeting using your keypad and press .

(See “Entering Text” on page 36.) (To erase the existing greeting one character at a time, press . To erase the entire greeting, press and hold .)

Changing the Backlight Time Length

The backlight setting lets you select how long the display screen and keypad remain backlit after any keypress is made.

To change the Main LCD or Sub LCD backlight setting:

1.

Press > Settings > Display > Backlight.

2.

Select Main LCD or Sub LCD.

3.

Select Always On, Dim Only, or a preset length of time.

Note: The Always On setting returns to the previous value the next time you turn on the phone.


To change the Keypad backlight setting:

1.

Press > Settings > Display > Backlight > Key.

2.

Select Always Off or a preset length of time.

Note: Long backlight settings affect the battery’s talk and standby times.

Changing the Display Screen Animation

Your new phone offers options for what you see on the display screen during various phone functions.

To change the animation display:

1.

Press > Settings > Display > Animation.

2.

Select Standby, Outgoing Calls, or Service Search.

(Select Set if you have selected Standby.)

3.

Select an option (Preset, My Content, -Get New, or Off), and press .

䡲 For standby, you can select Time to set the animation starting time.

䡲 Preset is not available for Standby.

Changing the Display for Incoming Calls

You can set the color or downloaded image to be shown on the Incoming

Calls display.

To change the incoming calls display:

1.

Press > Settings > Display > Incoming Calls.

2.

Select an option (Preset, My Content, -Get New, In Camera,

Saved to Phone, or Off), and press .

3.

Select a color or an image, and press .


Changing the Display for Area Name

This feature enables you to show the state of the phone number you are calling or are called from when the number is not registered in your Contacts list. For example, a call to or from 213-555-5555 will display “California.”

To set your area name display:

1.

Press > Settings > Display > Others > Match Area Code.

2.


Note: This feature is available only when the phone number has 10 digits, or 11 digits beginning with 1, and matches an area code.

Changing the Phone’s Menu Style

Your phone allows you to choose how the menu is displayed on the screen.

To select the display’s menu style:

1.

Press > Options (right softkey) > Change View.

2.

Select a menu style (Grid View or List View) and press .

Changing the Screen Saver

Your new phone offers you the option of displaying a screen saver while in standby mode.

To change the screen saver:

1.

Press > Settings > Display > Screen Saver.

2.


3.

Select an option (Preset, My Content, -Get New, In Camera,

Saved to Phone, or Off) and press .

4.

Select a screen saver and press .


Changing the Clock/Calendar Display for

Standby Mode

Select from among a variety of items to be displayed in standby mode.

To set the clock/calendar display for standby mode:

1.

Press > Settings > Display > Clock/Calendar.

2.


3.

Select a display option and press .

4.

Press to apply the setting.

Power Save Mode

This feature helps conserve your battery power by setting the Main LCD and

Sub LCD backlights to “Dim Only,” the Main LCD sleep mode to “after 30 sec.” and the Sub LCD sleep mode to “after 5 sec.”.

To set this feature:

1.

Press > Settings > Display > Power Save Mode.

2.

A message appears. Press OK (left softkey) to continue.

3.


Sleep Mode

This feature helps conserve your battery power by restricting the display.

To set sleep mode:

1.

Press > Settings > Display > Others > Sleep Mode.

2.


3.

Select a sleep mode interval and press . (Select Off to deactivate this feature.)


Changing the Text Font Size

This setting allows you to adjust the display appearance when entering text

(for example, when writing a message or when adding a Contacts entry) or when viewing a message.

To change the text font size:

1.

Press > Settings > Display > Others > Font Size.

2.

Select View or Input.

䡲 View to select Main LCD (then Messaging or Browser) or

Sub LCD (then Names/Phone#s).

䡲 Input to select Phone#s, Messaging, or Others.

3.

Select a font size and press .

Tip: From the font preview display, select a font size by pressing the navigation key right or left.

Setting Return to Standby Mode

This feature allows you to select the way to return to standby mode.

To set this feature:

1.

Press > Settings > Display > Others > Return to Idle.

2.

A message appears. Press OK (left softkey) to continue.

3.

Select Automatically or End Key.

䡲 Automatically to return to standby mode automatically when no key is pressed for 30 seconds.

䡲 End Key to return to standby mode by pressing

END

.

Note: The End Key setting affects the battery’s talk and standby times.


Location Settings

Your phone is equipped with a Location feature for use in connection with location-based services that may be available in the future.

The Location feature allows the network to detect your position. Turning

Location off will hide your location from everyone except 911.

Note: Turning Location on will allow the network to detect your position using

GPS technology, making some applications and services easier to use.

Turning Location off will disable the GPS location function for all purposes except 911, but will not hide your general location based on the cell site serving your call. No application or service may use your location without your request or permission. GPS-enhanced 911 is not available in all areas.

To enable your phone’s Location feature:

1.

Press > Settings > Location. (The Location disclaimer is displayed.)

2.

Read the disclaimer and press OK (left softkey).

3.


When the Location feature is on, your phone’s standby screen will display the icon. When Location is turned off, the icon will be displayed.


Messaging Settings

Staying connected to your friends and family has never been easier. With your phone’s advanced messaging capabilities, you can send and receive many different kinds of messages.

Your phone’s messaging settings make text messaging even faster and easier by letting you decide how you would like to be notified of new messages, create a signature with each sent message,and create your own preset messages, to name just a few.

Setting Message Notification

When you receive a message, your phone notifies you by displaying an icon on your display screen. You can also choose to be notified with a message notification on your display screen.

To set message notification:

1.

Press > Settings > Messaging > Notification.

2.

Select Msgs and Icon or Icon Only.


Managing Preset Messages

Your phone is loaded with 20 preset messages, in English and in Spanish, to help make sending text messages faster and easier. These messages, such as “Where are you?,” “Let’s get lunch,” and “Meet me at,” can be customized or deleted to suit your needs.

To edit a preset message:

1.

Press > Settings > Messaging > Preset Msgs.

(The list of preset messages is displayed.)

2.

Select the message you want to edit and press .

3.

Use your keypad to edit the message and press OK (left softkey) to save your changes.

䡲 To reset all messages, press Options (right softkey)

> Reset All Msgs > Yes during step 2 above.

To change the language of the preset messages:

1.


2.

Press Options (right softkey) > Select Language.

3.

Select English or Spanish.

Note: For information on editing text, see “Entering Text” on page 36.

Setting the Delivery Receipt for SMS Text Messages

You can set your phone to send a delivery message confirming that your message was successfully delivered to the recipient.

To set the delivery receipt:

1.

Press > Settings > Messaging > Text > Delivery Receipt.

2.


Note: The Delivery Receipt feature may not currently be supported by the network.


56

Setting a Callback Number

With this feature, you can notify your recipients of your callback number with a text message.

To set the callback number:

1.

Press > Settings > Messaging > Text > Send Callback#, and then press again.

2.

Select an option from the following and press .

䡲 None to send no callback number.

䡲 My Phone# to send your phone number.

䡲 Other to send a specific callback number. To set a number, enter a phone number and press .

3.

Press Done (left softkey).

Setting the Drafts Alert for SMS Text Messaging

Drafts Alert gives you a reminder when you have unsent messages waiting in the drafts folder.

To set Drafts Alert:

1.

Press > Settings > Messaging > Text > Drafts Alert.

2.


Adding a Customized Signature

Each message you send can have a customized signature.

To add a customized signature to each sent message:

1.

Press > Settings > Messaging > Text > Signature.

2.

Select On in the Signature field.

3.

Enter your signature in the Text field. (See “Entering Text” on page 36.)

4.

Press OK (left softkey) > Save (left softkey).

Section 2B: Controlling Your Phone’s Settings

Airplane Mode

Airplane Mode allows you to use many of your phone’s features, such as

Games and Voice Memos, when you are in an airplane or in any other area where making or receiving calls or data is prohibited. When your phone is in

Airplane Mode, it cannot send or receive any calls or access online information.

To set your phone to Airplane Mode:

1.

Press > Settings > Others > Airplane Mode.

(The Airplane Mode disclaimer is displayed.)

2.


3.


While in Airplane Mode, your phone’s standby screen will display

“Phone Off.”


TTY Use

A TTY (also known as a TDD or Text Telephone) is a telecommunications device that allows people who are deaf, hard-of-hearing, or who have speech or language disabilities to communicate by telephone.

Your phone is compatible with select TTY devices. Please check with the manufacturer of your TTY device to ensure that it supports digital wireless transmission. Your phone and TTY device will connect via a special cable that plugs into your phone’s headset jack. If this cable was not provided with your

TTY device, contact your TTY device manufacturer to purchase the connector cable.

When establishing your wireless service, please call your service provider via the state Telecommunications Relay Service (TRS) by first dialing number: 866-727-4889.

. Then provide the state TRS with this

To turn TTY Mode on or off:

1.

Press > Settings > Others > TTY.

(An informational message is displayed.)

2.


3.

Select Enable to turn TTY mode On.

– or –

Select Disable to turn TTY mode Off.

Note: In TTY Mode, your phone will display the TTY access icon.

If TTY mode is enabled, the audio quality of non-TTY devices connected to the headset jack may be impaired.


WARNING 911 Emergency Calling

It is recommended that TTY users make emergency calls by other means, including Telecommunications Relay Services (TRS), analog cellular, and landline communications. Wireless TTY calls to 911 may be corrupted when received by public safety answering points (PSAPs), rendering some communications unintelligible. The problem encountered appears related to TTY equipment or software used by PSAPs. This matter has been brought to the attention of the FCC, and the wireless industry and the PSAP community are currently working to resolve this.

Phone Setup Options

My Favorites

Your phone offers you the option of assigning a shortcut to a favorite or often-used function. Pressing Favorites (left softkey) in standby mode will launch your personal favorites list.

To assign your shortcut:

1.

Press Favorites (left softkey) to display the My Favorites list.

2.

Highlight <Add Favorite> and press .

3.

Using the navigation key or your keypad, select functions to be assigned to the My Favorites list.

4.

Press Assign (left softkey) to save.

Tip: While My Favorites list is displayed, press Options (right softkey) to customize the list according to your needs.


Display Language

You can choose to display your phone’s onscreen menus in English or in

Spanish.

To assign a language for the phone’s display:

1.

Press > Settings > Others > Language.

2.

Select English or Español.

Auto-Answer Mode

You may set your phone to automatically pick up incoming calls when connected to an optional hands-free car kit or a headset.

To set Auto-Answer mode:

1.

Press > Settings > Others > Auto Answer.

2.


䡲 Hands-free to answer calls automatically when the phone is connected to a hands-free device (sold separately). Remember, your phone will answer calls in Auto-Answer mode even if you are not present.

䡲 Speakerphone to answer calls automatically in speakerphone mode.

3.

Select 5 Seconds, 15 Seconds, or Off.


Setting Text Entry Options

To set your text entry options:

1.

Press > Settings > Others > Text Entry.

2.


䡲 Auto-Capital to turn auto-capitalization on or off.

䡲 My Words to add a word to or edit a word in the T9 database

(see page 38).

䡲 Input Language to select the language (English or Spanish).

䡲 Default Input to select T9 word, Alphabet, or Retain Mode for the initial entry mode.

䡲 Auto-Space to turn the auto-spacing on or off after T9 words you enter.

䡲 T9 Settings to customize the T9 settings (see page 39).

䡲 Add Word to store words that you use frequently (see page 38).

䡲 Help to see the T9 instruction page.

Setting the Current Time

To set the current time when you are roaming in an area with no digital network:

1.

Press > Settings > Others > Set Time/Date.

2.

Set the current time and date and press .

Note: This feature is available only when you are in an area with no digital network available.


Setting the Open/Close Flip Option

This feature enables you to answer an incoming call by opening the phone or to end a call by closing the phone.

To activate the Open Flip feature:

1.

Press > Settings > Others > Open/Close Flip.

2.

Select Open.

3.

Select Answer Call.

䡲 To deactivate this feature, select No Action.

To activate the Close Flip feature:

1.

From step 2 above, select Close. (You will see a message on the display.)

2.

Press OK (left softkey) to continue.

3.

Select an option from the following and press .

䡲 End to end the call.

䡲 Continue (Mute) to continue the call. Your voice is muted; however, you can hear the caller’s voice from the speaker.

䡲 Continue (Unmute) to continue the call. You can hear the caller's voice and speak to the phone to answer.

Note: The Close Flip feature does not apply when you are using the speakerphone, a headset, a car kit, or Bluetooth.


Setting Any Key Answer

This feature allows you to answer incoming calls by pressing any key (except

, , softkeys, and side keys).

END

To turn any key answer on or off:

1.

Press > Settings > Others > Any Key Answer.

2.


Setting the Side Key Guard

This feature enables you to lock the side keys while the phone is closed.

To turn the Side Key Guard on or off:

1.

Press > Settings > Others > Side Key Guard.

2.


Note: This feature does not apply when the phone is open. You can deactivate this feature temporarily to use side keys by pressing and holding the side volume key while the phone is closed.

Setting Navigation Key Shortcuts

You can use the navigation keys as a shortcuts to access specific menu items directly from standby mode. With this feature, you can reassign the default shortcuts to the menu items you choose.

To set the navigation key shortcuts:

1.

Press > Settings > Others > Navigation Keys.

2.

Select the navigation key you wish to reassign and press .

3.

Using the navigation key or your keypad, select a function.

4.

Press Assign (left softkey) to save.


Setting Abbreviated Dialing

Abbreviated Dialing allows you to dial a number using the last four or five digits of the phone number. You can use either of the following options for this feature:

䢇 Ph.Book Match to retrieve any number saved in your Contacts by entering the last three to six digits of the number.

䢇 Prepend # to predefine the first five- or six-digit prefix you wish to use for abbreviated dialing, so that you can dial a number by entering only the last four or five digits of the number.

To set up Abbreviated Dialing:

1.

Press > Settings > Others > Abbrev. Dial.

2.

Select Ph. Book Match, and then select Enable or Disable.

3.

Select Prepend, and then select Enable.

4.

Enter the first five- or six- digit prefix in the Prepend# field, and press .

䡲 To deactivate this feature, select Disable during step 3 above.

To make a call using Abbreviated Dialing:

1.

Enter the last four or five digits of the prefix phone number.

2.

Press .

Note: If the digits match more than one entry, the Abbrev. Dial list will be displayed; select the correct entry and press TALK again.

This setting does not apply to 911.


Setting Headset Mode

This feature allows you hands-free phone use. Press the Turbo Button (the operation button) on the headset to activate useful functions.

To connect the headset:

䊳 Simply plug the headset into your phone’s headset jack.

To set headset mode:

1.

Press > Settings > Others > Headset Mode.

2.

Select Turbo Button.

3.


To set the ringer sound:

1.

Press > Settings > Others > Headset Mode.

2.

Select Ringer Sound.

3.

Select Normal or Headset Only.


Setting Your Phone’s Security

Section 2C

In This Section

⽧

Accessing the Security Menu (page 67)

⽧ Using Your Phone’s Lock Feature (page 67)

⽧ Restricting Calls (page 69)

⽧ Using Special Numbers (page 70)

⽧ Erasing Phone Content (page 71)

⽧

Resetting the Browser (page 72)

⽧

Resetting My Favorites (page 72)

⽧ Resetting Default Settings (page 73)

⽧ Resetting Your Phone (page 73)

⽧ Resetting Your Picture Messaging Account (page 74)

⽧

Security Features for Data Services (page 74)

By using the security settings on your phone, you receive peace of

mind without sacrificing flexibility. This section will familiarize you with your phone’s security settings. With several options available, you can customize your phone to meet your personal needs.

66 Section 2C: Setting Your Phone’s Security

Accessing the Security Menu

All of your phone’s security settings are available through the Security menu.

You must enter your lock code to view the Security menu.

To access the Security menu:

1.

Press > Settings > Security.

2.

Enter your lock code to display the Security menu.

Tip: If you can’t recall your lock code, try using the last four digits of your wireless phone number or try 0000. If neither of these works, contact your service provider.

Using Your Phone’s Lock Feature

Locking Your Phone

When your phone is locked, you can only receive incoming calls or make calls to 911 or special numbers. (See “Using Special Numbers” on page 70.)

To lock your phone:

1.

From the Security menu, select Lock Phone > Lock Now.

– or –

To set your phone to lock the next time it is turned on, select

On Power-up.

2.

Select Full Lock or Exp. IncomingCalls.

䡲 Full Lock to disable both outgoing and incoming calls.

䡲 Exp. IncomingCalls to disable outgoing calls while allowing incoming calls.

Section 2C: Setting Your Phone’s Security 67

Unlocking Your Phone

To unlock your phone:

1.

From standby mode, press Unlock (left softkey).

2.

Enter your lock code.

Lock Services

With this feature, you can choose to restrict access to data services, incoming and outgoing voice calls.

To activate lock services:

1.

From the Security menu, select Others > Lock Services.

2.

Select Voice Calls or Web.

3.

Select Locked. (Select Unlocked to deactivate this feature.)

Changing the Lock Code

To change your lock code:

1.

Press > Settings > Security, and then enter your lock code.

(The Security menu is displayed.)

2.

Select Others > Change Lock, and then enter and re-enter your new lock code.

Locking the Pictures Menu

With this feature, you must enter your lock code when you access the pictures menu.

To lock the pictures menu:

1.



2.

Select Picture Msg > Lock Pictures > Lock Now. (Select

Unlocked to deactivate this feature.)


Calling in Lock Mode

You can place calls to 911 and to your special numbers when in lock mode.

(For information on special numbers, see “Using Special Numbers” on page 70.)

To place an outgoing call in lock mode:

䊳 To call an emergency number or special number, enter the phone number and press .

Restricting Calls

There may be occasions when you want to limit the numbers your phone can call or from which it can receive calls. You can use the Restrict Calls setting to do just that. (The Restrict Calls setting does not apply to 911.)

To restrict calls:

1.



2.

Select Others > Limit Use.

3.

Select Outgoing Calls or Incoming Calls.

4.


䡲 Allow All lets you make or receive all calls.

䡲 Phone Book Only lets you make or receive calls to or from

Contacts entries, voicemail, or special numbers only.

䡲 Special #s Only lets you make or receive calls to or from three special numbers only. (See “Using Special Numbers” on page 70.)

Note: Restricted incoming calls are forwarded to voicemail.


Using Special Numbers

Special numbers are important numbers that you have designated as being

“always available.” You can make or receive calls to or from special numbers even if your phone is in Lock Phone status.

You can save up to three special numbers in addition to your Contacts entries.

(The same number may be in both directories.)

To add or replace a special number:

1.



2.

Select Others > Special #s.

3.

Select a field for your entry and press .

4.

Enter the number and press .

Note: There are no speed dial options associated with special numbers.

Special numbers cannot be called if Lock Services for voice calls (see page 68) is set to “Locked”.


Erasing Phone Content

You can quickly and easily erase all the content that you have created in your phone.

To erase phone content:

1.

Press >Settings > Security, and then enter your lock code. (The

Security menu is displayed.)

2.

Select Erase/Reset, and then select an option from the following and press .

䡲 Erase Ph. Book to erase all of your Contacts entries.

䡲 Erase My Content to erase all items you have downloaded to your phone.

䡲 Erase Pictures to erase all pictures saved in the phone.

䡲 Erase Voice Data to erase all voice memos saved in the phone.

䡲 Erase Voice Tag to erase all voice tags you have recorded.

䡲 Erase Messages to erase all messages (including locked ones) in the Inbox, Sent Mail, Pending, and Drafts folders; all Recent

Lists; and all user-created preset messages, text messages, etc.

3.

If you are certain you would like to erase, press OK (left softkey), and then select Yes.


Resetting the Browser

This option resets your Web browser’s history, bookmarks, cookies, autocomplete text, and URLs.

To reset the browser:

1.

Press >Settings > Security, and then enter your lock code.


2.

Select Erase/Reset > Reset Browser.

3.

If you are certain you would like to reset, press OK (left softkey), and then select Yes.

Resetting My Favorites

This option resets all of your My Favorites settings.

To reset My Favorites:

1.



2.

Select Erase/Reset > Reset Favorites.

3.

If you are certain you would like to reset your My Favorites settings, press OK (left softkey), and then select Yes.


Resetting Default Settings

Resetting the default settings restores all the factory defaults, including the ringer types and display settings. The Contacts, Call History, Calendar, and

Messaging are not affected.

To reset default settings:

1.

Press >Settings > Security, and then enter your lock code. (The

Security menu is displayed.)

2.

Select Erase/Reset > Default Settings. (A disclaimer is displayed.)

3.


4.

If you are certain that you would like to restore all the factory settings, select Yes.

Resetting Your Phone

Resetting the phone resets all settings and erases all data on your phone.

To reset your phone:

1.



2.

Select Erase/Reset > Reset Phone. (A disclaimer is displayed.)

3.


4.

If you are certain that you would like to erase all the data and reset your settings, select Yes.


Resetting Your Picture Messaging Account

This option resets your authentication ID for your picture messaging account.

To reset your picture messaging account:

1.



2.

Select Picture Msg > Reset Picture Msg (A warning appears.)

3.

Press OK (left softkey) to continue.

4.

If you are certain that you would like to reset your picture messaging account, select Yes.

Security Features for Data Services

Enabling and Disabling Data Services

You can disable data services without turning off your phone; however, you will not have access to all data services, including Web and messaging.

Disabling data services will avoid any charges associated with these services. While signed out, you can still place or receive phone calls, check voicemail, and use other voice services. You may enable data services again at any time.

To disable data services:

1.

Press > Settings > Web > Disable Web. (A message will be displayed.)

2.

Press Disable (right softkey) to confirm that you want to sign out.

To enable data services:

1.

Press > Settings > Web > Enable Web. (A message will be displayed.)

2.

Press OK (left softkey) to confirm.


Section 2D

Controlling Your Roaming Experience

In This Section

⽧ Understanding Roaming (page 76)

⽧

Setting Your Phone’s Roam Mode (page 78)

⽧

Using Call Guard (page 79)

⽧

Using Data Roam Guard (page 80)

Roaming is the ability to make or receive calls when you’re off the

home network. Your new KATANA II by SANYO works anywhere on the home network and allows you to roam on 1900 and 800 MHz digital networks.

This section explains how roaming works as well as special features that let you manage your roaming experience.

Section 2D: Controlling Your Roaming Experience 75

Understanding Roaming

Recognizing the Roaming Icon on the Display Screen

Your phone’s display screen always lets you know when you’re off the home network. Any time you are roaming, the phone displays the roaming icon ( ).

Tip: Remember, when you are using your phone off the home network, always dial numbers using 11 digits (1 + area code + number).

Roaming on Other Digital Networks

When you’re roaming on digital networks, your call quality and security will be similar to the quality you receive when making calls on the home network.

However, you may not be able to access certain features, depending on the available network.

Note: If you’re on a call when you leave the home network and enter an area where roaming is available , your call is dropped. If your call is dropped in an area where you think service is available, turn your phone off and on again to reconnect to the network.

76 Section 2D: Controlling Your Roaming Experience

Checking for Voicemail Messages While Roaming

When you are roaming off the home network, you may not receive on-phone notification of new voicemail messages. Callers can still leave messages, but you will need to periodically check your voicemail for new messages if you are in a roaming service area for an extended period of time.

To check your voicemail while roaming:

1.

Dial 1 + area code + your phone number.

2.

When you hear your voicemail greeting, press .

3.

Enter your passcode at the prompt and follow the voice prompts.


Setting Your Phone’s Roam Mode

Your phone allows you to control your roaming capabilities. By using the Roaming menu option, you can determine which signals your phone accepts.

Set Mode

Choose from three different settings on your phone to control your roaming experience.

To set your phone’s roam mode:

1.

Press > Settings > Others > Roaming > Set Mode.

2.


䡲 Home Only to access the home network only and prevent roaming on other networks.

䡲 Automatic to seek service on the home network.

䡲 Roaming Only to force the phone to seek a roaming system.

The previous setting (Home Only or Automatic) is restored the next time the phone is turned on.


Using Call Guard

Your phone has two ways of alerting you when you are roaming off the home network: the onscreen roaming icon and Call Guard. Call Guard makes it easy to manage your roaming charges by requiring an extra step before you can place or answer a roaming call. (This additional step is not required when you make or receive calls while on the home network.)

Note: Call Guard is turned off by default on your phone.

To turn Call Guard on or off:

1.

Press > Settings > Others > Roaming > Call Guard.

2.


To place roaming calls with Call Guard on:

1.

From standby mode, dial 1 + area code + the seven-digit number and press .

2.


– or –

Press any key to erase the pop-up message, and then press Options

(right softkey) > Roam Call.

To answer incoming roaming calls with Call Guard on:

1.

Press . (A message will be displayed notifying you that roaming charges will apply.)

2.


– or –

Press any key to erase the pop-up message, and then press Options

(right softkey) > Answer.

Note: If the Call Guard feature is set to On , you need to take extra steps to make and receive roaming calls.


Using Data Roam Guard

Depending on service availability and roaming agreements, your phone may be able to access data services while roaming on certain digital systems. You can set your phone to alert you when you are roaming off the home network and try to use data services such as messaging.

Note: Data Roam Guard is turned off by default on your phone.

To set the Data Roam Guard notification:

1.

Press > Settings > Others > Roaming > Data Roam Guard.

2.


䡲 Always Ask to enable your phone’s Data Roam Guard feature.

You will see a prompt and will be required to respond anytime you access data services while roaming.

䡲 Never Ask to disable your phone’s Data Roam Guard feature.

You will not be notified of your roaming status when accessing data services.

To use data services when Data Roam Guard is active:

䊳 When a pop-up notification appears informing you that data roam charges may apply, press Roam (left softkey) to connect.


Section 2E

Managing Call History

In This Section

⽧ Viewing History (page 82)

⽧

Call History Options (page 83)

⽧

Making a Call From Call History (page 84)

⽧

Saving a Phone Number From Call History (page 84)

⽧

Prepending a Phone Number From Call History (page 85)

⽧

Erasing Call History (page 85)

The Call History keeps track of incoming calls, outgoing calls,

missed calls, and recent calls. This section guides you through accessing and making the most of your Call History.

Section 2E: Managing Call History 81

Viewing History

You’ll find the Call History feature very helpful. It is a list of the last 20 phone numbers (or Contacts entries) for calls you placed, accepted, or missed. Call

History makes redialing a number fast and easy. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list.

Each entry contains the phone number (if it is available) and Contacts entry name (if the phone number is in your Contacts). Duplicate calls (same number and type of call) may only appear once on the list.

To view a Call History entry:

1.

Press > Call History, and then select Outgoing, Incoming,

Missed, or Recent Calls.

2.

Highlight the entry you wish to view and press .

Note: Call History records only calls that occur while the phone is turned on. If a call is received while your phone is turned off, it will not be included in the phone’s

Incoming or Missed call logs.

82 Section 2E: Managing Call History

Call History Options

For additional information and options on a particular call, highlight a Call

History entry and press . This feature displays the date and time of the call, the phone number (if available), and the caller’s name (if the number is already in your Contacts). By pressing Options (right softkey), you can choose from the following options:

䢇 Call to dial the phone number.

䢇 Call:Speaker On to dial the phone number in speakerphone mode.

䢇 Send Message to send a Text or Picture message.

䢇 Save Phone# to save if it is not already in your Contacts.

䢇 Go to Phone Book to display the entry for a number that is already in your Contacts list. (See “Saving a Phone Number From Call History” on page 84.)

䢇 Rename to change the current entry’s name to Caller ID name (if applicable).

䢇 Prepend to add numbers to the beginning of the phone number. (See

“Prepending a Phone Number From Call History” on page 85.)

䢇 Erase to erase the entry.

Tip: You can also view the next Call History entry by pressing the navigation key right, or you can view the previous entry by pressing the navigation key left.


Making a Call From Call History

To place a call from Call History:

1.

Press > Call History, and then select Outgoing, Incoming,

Missed, or Recent Calls.

2.

Use your navigation key to select a Call History entry and press .

Saving a Phone Number From Call History

Your phone can store up to 500 phone numbers in up to 300 Contacts entries. (An entry may contain up to seven numbers.)

To save a phone number from Call History:

1.

Use your navigation key to select a Call History entry and press

Options (right softkey) > Save Phone#.

2.

Select New Name to create a new Contacts entry for the number or

From Ph. Book to save the number to an existing entry.

3.

Select an appropriate label and press .

4.

Enter a name for the new entry using the keypad and press .

– or –

Search for an existing contact name and press to save the new number.

5.

Press Save (left softkey).

Note: You cannot save phone numbers from calls identified as No Caller ID or

Restricted.

84 Section 2E: Managing Call History

Prepending a Phone Number From

Call History

If you need to make a call from Call History and you happen to be outside your local area code, you can add the appropriate prefix by prepending the number.

To prepend a phone number from Call History:

1.

Select a Call History entry and press Options (right softkey).

2.

Select Prepend.

3.

Enter the prefix and press to call the number.

Erasing Call History

To erase individual Call History entries, see “Call History Options” on page 83.

To erase Call History:

1.

Press > Call History > Erase History.

2.

Select Outgoing, Incoming, Missed, Recent Calls, or All.

(A confirmation dialog will be displayed.)

3.

If you are certain you want to erase the call history, select Yes.

– or –

Select No to return to the previous menu.


Section 2F

Using Contacts

In This Section

⽧ Adding a New Contacts Entry (page 87)

⽧ Assigning a Group Entry (page 88)

⽧ Finding Contacts Entries (page 89)

⽧

Editing a Contacts Entry (page 90)

⽧ Contacts Entry Options (page 91)

⽧ Assigning Speed Dial Numbers (page 92)

⽧ Erasing a Contacts Entry From the List (page 92)

⽧ Assigning an Image to a Contacts Entry (page 93)

⽧

Assigning a Ringer Type to an Entry (page 93)

⽧

Secret Contacts Entries (page 94)

Now that you know the basics that make it easier to stay in touch with people and information, you’re ready to explore your phone’s

more advanced features. This section explains how to use your phone’s

Contacts list and helps you make the most of your time when you are trying to connect with the important people in your life.

86 Section 2F: Using Contacts

Adding a New Contacts Entry

Your phone can store up to 500 phone numbers in up to 300 Contacts entries. (An entry may contain up to seven numbers.) Each entry’s name can contain 32 characters.

To add a new entry:

1.

Press > Contacts > Find/Add Entry > Add Contact.

2.

Enter the Contacts name and press the navigation key down.

3.

Enter the phone number for the entry and press .

4.

Select a label for the entry (Mobile, Home, Work, Pager, Fax, or

Other) and press .

5.


Tip: ICE – In Case of Emergency

To make it easier for emergency personnel to identify important contacts, you can list your local emergency contacts under “ICE” in your phone’s

Contacts list. For example, if your mother is your primary emergency contact, list her as “ICE–Mom” in your Contacts list. To list more than one emergency contact, use “ICE1–___,” “ICE2–___,” etc.

Section 2F: Using Contacts 87

Assigning a Group Entry

Your phone can create up to 20 separate group entries.By assigning

Contacts entry to a group, you can search easily using a user-defined group name.

To assign a Contact entry to a group:

1.

Press > Contacts > Group.

2.

Select an available group entry location and press Options (right softkey) > Add Members.

3.

Select a contact and press .

4.

Press Add (left softkey) when you have finished selecting members.

To edit a group entry:

1.


2.

Select the group entry you want to edit and press Options (right softkey) > Edit.

3.

Select the field you want to edit (Name, Ringer, or Picture ID) and press .

4.

Edit the field and press .

5.

Press Save (left softkey) to save your changes.

To erase a group member:

1.


2.

Select the group entry you want to erase members from and press

.

3.

Select the member you want to erase and press Options (right softkey) > Erase > This or All.

4.

Select Yes or No.


Finding Contacts Entries

There are several ways to display your Contacts entries: by name, by speed dial number, and by group. Follow the steps outlined in the sections below to display entries from the Contacts menu.

Finding Names

To find Contacts entries by name:

1.


2.

Scroll through all the entries using the navigation key.

– or –

Enter the first letter of the name or part of the name. (The more letters you enter, the more your search narrows.)

3.

To display an entry, highlight it and press .

4.

To make the call, highlight a number and press .

Shortcut: From standby mode, press Contacts (right softkey) to list entries.

Finding Speed Dial Numbers

To find phone numbers you have stored in speed dial locations:

1.

Press > Contacts > Speed Dial #s.

2.

Scroll to an entry using your navigation key.

3.

Press to dial the number.


Finding Group Entries

To find entries designated as part of a group:

1.


2.

Scroll through the group entries using your navigation key. To display

Contacts entries belonging to a group, highlight the group and press

.

3.

To dial the entry’s default phone number, select the entry and press .

Editing a Contacts Entry

To make changes to an entry:

1.


2.

Scroll to the entry you wish to edit and press .

3.

Press Options (right softkey) > Edit; or Edit (right softkey).

4.

Select the field you want to edit and press .

5.

Add or edit the desired information and press .

6.

Press Save (left softkey) to save your changes.


Contacts Entry Options

To access a Contacts entry’s options, display the Contacts list, highlight an entry and press . Then select a phone number and press Options (right softkey). To select an option, highlight it and press .

䢇 Edit to edit the selected entry.

䢇 Call to dial the selected number.

䢇 Call:Speaker On to dial the phone number in speakerphone mode.

䢇 Send Message to send a Text or Picture message.

䢇 Call Alarm to set a call alarm for the entry. (See page 99 for Call Alarm.)

䢇 Set Speed Dial to assign speed dial numbers to your favorite entries.

䢇 Set Voice Tag to set a voice dial for the entry. (See page 107 for Voice

Dial.)

䢇 Prepend to alter a phone number by adding numbers to the beginning of the entry. (See “Prepending a Phone Number From Call History” on page 85.)

䢇 Send Contact to send a Contacts entry in the Contacts list.

Tip: You can view the next entry by pressing the navigation key right or view the previous entry by pressing the navigation key left.


Assigning Speed Dial Numbers

With this feature you can dial Contacts directory entries with one keypress for locations 2–9. For details on how to make calls using speed dial numbers, see “Using Speed Dialing” on page 35.

To assign a speed dial number to a selected Contacts entry:

1.

Press > Contacts > Speed Dial #s.

2.

Select an available speed dial location and press .

3.

Select an entry from the list and press .

4.

Select the phone number you want to set as a speed dial number and press .

– or –

1.

Select an entry in the Contacts list and press .

2.

Highlight the phone number you want to set as a speed dial number, and then press Options (right softkey) > Set Speed Dial.

3.

Select an available speed dial location and press .

Note: If you attempt to assign an already in-use speed dial location to a new phone number, a dialog will be displayed asking if you wish to replace the existing speed dial assignment. Select Yes to assign the location to the new phone number and delete the previous speed dial assignment.

Erasing a Contacts Entry From the List

To erase a selected entry:

1.

Select the entry you wish to delete and press Options (right softkey).

2.

Select Erase Contact > Yes.


Assigning an Image to a Contacts Entry

You can assign an image to a Contacts entry. The image is displayed when the entry calls you.

To assign an image for an entry:

1.

Select the entry for which you want to assign the image and press .

2.

Press the navigation key up to highlight the icon and press twice.

3.

Select an image and press .

4.

Press Save (left softkey) to save the image type.

Assigning a Ringer Type to an Entry

You can assign a ringer type to a Contacts entry so you can identify the caller by the ringer type. (See “Ringer Types” on page 42.)

To select a ringer type for an entry:

1.

Select the entry for which you want to set the incoming ringer and press .

2.

Press Options (right softkey) > Edit; or Edit (right softkey).

3.

Scroll down to the box next to the icon and press to display the Ringer Type menu.

4.

Select a ringer type (Single Tones, Ring Tones, or Melodies) and press .

5.

Select a ringer and press . (As you highlight a ringer, it will play automatically.)

6.

Press Save (left softkey) to assign the ringer to the Contacts entry.


Note: Instead of selecting a ringer type, you can also select Ringer & Voice ,

Vibrate , or Normal Ringer (default) during step 4 in “Assigning a Ringer

Type to an Entry” on page 93.

Secret Contacts Entries

You can hide an entry’s phone number(s) and require your lock code to edit the entry by making it secret. The entry name is still displayed, but all other information is replaced with “<Secret>”.

To make an entry secret:

1.


2.

Select the Contacts entry you want to tag as secret and press

Options (right softkey).

3.

Select Set Secret.

4.

Enter the four-digit lock code.

5.

Select On.

To make an entry public:

1.


2.

Select the Contacts entry you want to tag as public and press

Options (right softkey).

3.

Select Set Secret.

4.

Enter the four-digit lock code.

Tip:

5.

Select Off.

If you can’t recall your lock code, try using the last four digits of your wireless phone number or try 0000. If neither of these works, contact your service provider.


Section 2G

Using the Phone’s Calendar and Tools

In This Section

⽧ Using Your Phone’s Calendar (page 96)

⽧

Using Your Phone’s Tools (page 101)

⽧

Personal Information Management (page 105)

Your phone is equipped with several personal information management features that help you manage your busy lifestyle.

This section shows you how to use these features to turn your phone into a time management planner that helps you keep up with your contacts, schedules, and commitments.

Section 2G: Using the Phone’s Calendar and Tools 95

Using Your Phone’s Calendar

Displaying Your Calendar

To display your calendar:

䊳 Press > Tools > Calendar.

Adding an Event to the Calendar

Your Calendar helps organize your time and reminds you of important events

(up to 100 events).

To add an event:

1.

Press > Tools > Calendar and select the day to which you wish to add an event.

2.

Press Options (right softkey) > Add Event > Schedule.

3.

Select any of the following items and press .

䡲 Description to enter a description of the event (up to 14 characters).

䡲 From to schedule the start time.

䡲 To to schedule the end time.

䡲 Location to edit the location of the event (up to 14 characters).

䡲 Alarm to select a ringer.

䡲 Alarm Time to edit the alarm time (number of hours or minutes before the event starts). The default alarm time is 10 minutes before an event.

䡲 Repeat to set the event’s repeating status. Select Once, Daily,

Weekly, Monthly, or Yearly.

4.

Press Save (left softkey) to schedule the event.

Tip: The date for which you have scheduled events is indicated with a triangle “ 䊳 ”.

96 Section 2G: Using the Phone’s Calendar and Tools

Event Alerts

There are several ways your phone alerts you to scheduled events:

䢇 By playing the assigned ringer type.

䢇 By illuminating the backlight.

䢇 By flashing the LED.

Event Alert Menu

When your phone is turned on and you have an event alarm scheduled, your phone alerts you and displays the event summary.

To silence the alarm:

䊳 Press any key to stop the alarm. (The alarm will stop and then sound again after the selected snooze interval.)

䡲 Press and hold the side camera key to cancel snoozing.

䡲 Press Dismiss (right softkey) to dismiss the event.

Going to a Given Date

To go to the Calendar menu for a specific date:

1.

Press > Tools > Calendar > Options (right softkey) >

Go To Date.

2.

Enter the date you wish to go to using the navigation key or the keypad, and press .


Viewing Events

To view your scheduled events:

1.

Press > Tools > Calendar.

2.

Using your navigation key, highlight the day for which you would like to view events and press . (If you have events scheduled for the selected day, they will be listed in chronological order).

3.

To display the details of an event listed in the schedule, highlight the event and press .

Erasing a Day’s Events

To erase a day’s scheduled events:

1.

Press > Tools > Calendar, select the date for which you set events, and press .

2.

Select one of the events and press Options (right softkey) >

Erase Event > Yes.

3.

Repeat the same steps for other events of the day.

Erasing All Scheduled Events

To erase all scheduled events:

1.

Select > Tools > Calendar > Options (right softkey) >

Erase Memory.

2.

Select Erase Old or Erase All > Yes.

Note: All events are erased including Call Alarms (see page 99) and To Do List items

(see page 100).


Adding a Call Alarm to the Calendar

You can set call alarms to notify you when you need to place a call. The call alarm will let you know when and to whom to place a scheduled call. You can set up to 15 call alarms.

To add a call alarm to the calendar:

1.

Press > Tools > Calendar and select the day to which you want to add a call alarm.

2.

Press Options (right softkey) > Add Event > Call Alarm.

3.

Enter the phone number directly or press Options (right softkey) >

From Ph. Book or Voicemail.

4.

Select the field you want to edit (Time/Date, Alarm or Repeat) and press .

5.

Edit the field and press .

6.

Press Save (left softkey) to save the call alarm.

To respond to a call alarm:

䊳 Press to dial the phone number (if applicable).

Other options available include:

䡲 Press any key to repeat the alarm after the selected snooze interval.

䡲 Press and hold the side camera key to cancel snoozing.

䡲 Press Dismiss (right softkey) to dismiss the call alarm.


Adding To Do List Items

Your phone can store and manage up to 20 To Do List items.

To add an item to your To Do List:

1.

Press > Tools > Calendar > Options (right softkey).

2.

Select To Do List > Options (right softkey) > Add Item.

3.

Enter the description (up to 14 characters) and press .

4.

Select Priority to edit the To Do’s priority. (Normal, Urgent, or

Done.)

5.

Press Save (left softkey) to save the To Do items.

Adding a To Do List Item to the Schedule

You can extract an item from the To Do List and make it a scheduled event.

To add your To Do List item to the schedule:

1.

Press > Tools > Calendar > Options (right softkey) >

To Do List.

2.

Select the item you want to add to the schedule and press Options

(right softkey) > Add To Schedule.

3.

Modify the description field (if desired), and set the other fields using your keypad and press . (See “Adding an Event to the Calendar” on page 96 for how to enter information.)

4.


Tip: Once you have stored To Do items to the To Do List, you can press Mode (right softkey) > From To Do List when you are entering text in the Description field.


Using Your Phone’s Tools

In addition to helping you be more efficient and organized, your phone offers useful and entertaining tools.

Using the Alarm Clock

Your phone comes with a built-in alarm clock that has multiple alarm capabilities.

To use the alarm clock:

1.

Press > Tools > Alarm Clock.

2.

Select a number and press .

3.

Select the items you want to edit and press .

䡲 Description to enter a description of the alarm (up to 14 characters).

䡲 Time to enter the alarm time.

䡲 Repeat to select the alarm frequency.

䡲 Alarm to set the alarm on or off.

4.

Press Save (left softkey) to save the alarm settings.

Tips: Press the left softkey ( On or Off ) to toggle the alarm on and off.

To change the alert settings, press Settings (right softkey) to set the ringer length and snooze options.

Note: The alarm will not sound when the phone is powered off.


Using the Stopwatch

To start the stopwatch:

䊳 Press > Tools > Stopwatch.

䡲 Press Start (left softkey) to start the stopwatch.

䡲 Press Stop (left softkey) to stop the stopwatch.

䡲 Press Resume (left softkey) to restart the stopwatch.

To record a lap time while the stopwatch is running:

䡲 Press Lap (right softkey) to record time of the first lap.

䡲 Press Lap (right softkey) again to record the next lap times.

(You can record up to five lap times.)

To display the stopwatch options:

1.

From the stopwatch display, press Options (right softkey).

2.


䡲 Go to Lap List to display a saved Lap List. Press Detail (left softkey) to display the Lap List detail.

䡲 Save to Lap List to save the recorded lap times (if applicable).

䡲 Reset to reset the time to zero and clear any recorded lap times.


Using the Calculator

Your phone comes with a built-in calculator.

To use the calculator:

1.

Press > Tools > Calculator.

2.

Enter numbers using your keypad.

3.

Press the appropriate navigation key to perform a calculation

(Up for addition, Down for subtraction, Left for multiplication,

Right for division). Press the left softkey to insert a decimal point.

4.

Enter numbers and press for the result.

䡲 To clear the numbers, press CLR (right softkey).

Updating Your Phone

The update phone software option allows you to download and update the software in your phone over the air. Only the internal software is updated; no

Contacts entries or other information saved in your phone will be deleted.

To update your phone through the Tools menu:

1.

Press > Tools > Update Phone.

2.

If a new software version is available, press Yes (left softkey) to continue.

3.

Read the onscreen information and press Next (left softkey) to continue.

4.

Select Update Phone to update your phone.


World Clock

This feature is available only in digital service areas.

To view the time in different locations:

1.

Press > Tools > World Clock.

2.

Press the navigation key left or right to scroll through different time zones.

Tip: Press Summer (left softkey) or Standard (right softkey) to select between daylight saving and standard time (if applicable).

Using the Countdown Timer

This feature allows you to use the countdown timer with alarm capabilities.

You can set up to five timers.

To use the countdown timer:

1.

Press > Tools > Countdown.

2.

Select a number and press .

3.

Select the items you want to edit and press .

䡲 Description to enter a description of the countdown (up to 14 characters).

䡲 Time to enter the countdown time.

䡲 Alarm to set the countdown alarm on or off.

4.

Press Save (left softkey) to save the countdown settings.

Tips: Press the left softkey ( On or Off ) to toggle the countdown on and off.

To change the alert settings, press Settings (right softkey) to set the ringer length and snooze options.

Note: This feature is not available while your phone is turned off.


Personal Information Management

Displaying Your User Address

To display the phone’s current user address:


Finding Icon Definitions

To view an explanation of icons that appear on the display:

1.

Press > Settings > Phone Info > Icon Glossary.

2.

Select the item for which you want to see the explanation and press . (The icon’s explanation appears.)

Displaying Version Information

To display the version number of the software, hardware, PRL

(Preferred Roaming List), PRI (Product Release Instructions), etc., installed on your phone:

䊳 Press > Settings > Phone Info > Version.

Displaying Advanced Information

To display advanced information such as frequency and other technical information:

䊳 Press > Settings > Phone Info > Advanced.


Section 2H

Using Your Phone’s Voice Services

In This Section

⽧ Using Voice-Activated Dialing (page 107)

⽧

Managing Voice Memos (page 109)

⽧

Setting Up Screen Call (page 111)

Your phone’s Voice Services let you place calls using your voice,

store voice reminders, and record memos right on your phone. This section includes easy-to-follow instructions for using voice-activated dialing and managing voice memos.

106 Section 2H: Using Your Phone’s Voice Services

Using Voice-Activated Dialing

You can use a voice dial tag to automatically dial a phone number in your

Contacts. (A voice dial tag is a command you record and use to place calls without using the keypad.) Your phone can store up to 30 voice dial tags.

Note: Please set the Voice Prompt feature (see page 44) to on before using the

Voice-Activated Dialing so that you can hear the voice instruction from the phone. The default setting is off.

Making a Call Using Voice-Activated Dialing

To use a voice dial tag to call a phone number:

1.

Press and hold .

2.

Follow the system prompts and recite the entry’s Voice Dial tag into your phone’s microphone.

Note: To use the Voice Dial function, you must have stored Voice Dial entries.

(See “Programming Voice Dial Tags” on page 108.)

Tip: You can also make a call using voice-activated dialing with the phone closed. Press and hold the side volume key up or down while in standby mode, and follow the voice prompts.

Section 2H: Using Your Phone’s Voice Services 107

Programming Voice Dial Tags

To program a voice dial tag:

1.


2.

Select a contact and press .

3.

Select a phone number, and then press Options (right softkey) >

Set Voice Tag > Add.

4.

You will be prompted to say the name you want to program. Say the name after the beep.

5.

Respond to the prompt by repeating the name after the beep. (The display shows “Voice Tag Recorded.”)

Tip: Record voice dial tags in a quiet environment.

Reviewing Voice Dial Tags

To review voice dial tags:

1.

Select a Contacts entry for which you would like to review the voice dial tag and press .

2.

Select the phone number to which you have added a voice dial tag, and press Options (right softkey) > Set Voice Tag.

3.


䡲 Play to play the recorded voice dial tag.

䡲 Play:Speaker to play the recorded voice dial tag in speakerphone mode.

䡲 Change to change the recorded voice dial tag.

䡲 Erase to erase the recorded voice dial tag. Select Yes to erase; select No to cancel.

Tip: To erase all voice dial tags you have recorded, see “Erasing Phone

Content” on page 71.


Managing Voice Memos

You can use your phone’s Voice Services to record brief memos to remind you of important events, phone numbers, or grocery list items.

Recording Voice Memos

To record a voice memo:

1.

Press > Tools > Voice Memo > Record.

2.

Start recording after the beep.

3.

To end the recording, press , or

END

.

Note: Your phone can store up to 300 memos (maximum of three minutes per memo).

The total recording time depends on the available memory space on your phone.

To record a phone conversation:

1.

During a call, press Options (right softkey) > Tools >

Call Memo Rec.

2.

Start recording after the beep.

3.

To end the recording, press or .

– or –

Press to stop recording and disconnect the call.

END

Note: Only the other party’s voice is recorded during this process.


Reviewing Voice Memos

To play the voice memos you have recorded:

1.

Press > Tools > Voice Memo > List.

2.

Select a voice memo from the list and press .

– or –

Press Options (right softkey) > Play > This, Multiple, or All. (If you have selected Multiple, choose your desired memos, and then press

Play [left softkey].)

3.

Press to stop playing.

䡲 Press Slow (left softkey) or Fast (right softkey) to change the playing speed.

Voice Memo Options

There are several user options available for managing voice memos.

To display the voice memo options:

1.

Press > Tools > Voice Memo > List.

2.

Select a voice memo and press Options (right softkey).

3.


䡲 Play to play a selected voice memo or all voice memos.

䡲 Speaker On or Speaker Off to activate or deactivate the speakerphone mode.

䡲 Edit Title to edit the title of your voice memos.

䡲 Properties to show the properties of your voice memos.

䡲 Type Filter to filter your voice memos.

䡲 Sort by to sort your voice memos.

䡲 Erase to erase an individual memo or all voice memos.


Setting Up Screen Call

This feature enables you to screen incoming calls by using a recorded announcement, either one that is prerecorded or one that you record. You can also record the caller’s message into the Voice Memo list.

Activating Screen Call

To start Screen Call when you have incoming calls:

䊳 When the phone rings or vibrates, press Options (right softkey) >

Screen Call.

To set Auto Screen Call:

1.

Press > Tools > Voice Memo > Screen Call > Auto.

2.

Select On and press .

3.

Set the answer delay by using numeric keys or by pressing the navigation key up or down.

4.

Press OK (left softkey). (The icon is displayed on the screen.)

Tip: While the caller’s message is being recorded, press TALK to answer the call, or press END to stop recording and disconnect the call.

Selecting an Announcement for Screen Call

To select a Screen Call announcement:

1.

Press > Tools > Voice Memo > Screen Call >

Announcement.

2.

Depending on your preference, select Pre-Recorded or Custom.


Recording Your Name for a Prerecorded

Announcement

You can use a prerecorded announcement with or without your name. If you record your name, your phone adds your name to the prerecorded message to announce that you are not available to answer calls.

To record your name:

1.


Announcement.

2.

Select Pre-Recorded and press Edit (right softkey) > Record

Name.

3.

Press to start the first recording. (Press to stop recording. The maximum recording time is 12 seconds.)

4.

After the first recording, press again to start the second recording.

5.

Press to stop recording.

Recording a Customized Announcement

To record an announcement:

1.


Announcement.

2.

Select Custom and press Edit (right softkey) > Record.

3.

Press to start the first recording. (Press to stop recording. The maximum recording time is 12 seconds.)

4.

After the first recording, press again to start the second recording.

5.

Press to stop recording.


Reviewing an Announcement

To review an announcement:

1.


Announcement.

2.

Select Pre-Recorded or Custom and press Edit (right softkey).

3.

Select Play or Play:Speaker.

Erasing an Announcement

To erase an announcement:

1.


Announcement.

2.

Select Pre-Recorded or Custom, and press Edit (right softkey).

3.

Select Erase Name or Erase. (A confirmation will be displayed.)

4.

Select Yes.


Section 2I

Using the Built-in Camera

In This Section

⽧ Taking Pictures (page 115)

⽧

Storing Pictures (page 122)

⽧

Sending Pictures (page 125)

⽧

Managing Pictures (page 128)

Your phone’s built-in camera gives you the ability to take full-color digital pictures, view your pictures using the phone’s display, and

instantly send them to family and friends. It’s fun and as easy to use as a traditional point-and-click camera: just take a picture, view it on your phone’s display, and send it from your phone to up to 16 people.

This section explains the features and options of your phone’s built-in camera.

114 Section 2I: Using the Built-in Camera

Taking Pictures

Taking pictures with your phone’s built-in camera is as simple as choosing a subject, pointing the lens, and pressing a button. You can activate the phone’s camera mode whether the phone is open or closed.

To take a picture with the phone open:

1.

Press > Pictures > Camera to activate camera mode.

(Additional camera options are available through the camera mode

Options menu. See “Camera Mode Options” on page 117 for more information.)

Shortcut: To activate camera mode, you can also press and hold the camera key.

2.

Using the phone’s Main LCD as a viewfinder, aim the camera lens at your subject.

3.

Press Capture (left softkey), or press , , or the side camera key until the shutter sounds. (The picture will be saved in the In

Camera folder.)

䡲 To return to camera mode to take another picture, press .

4.

Press Next (right softkey) for more options:

䡲 Take New Picture to return to camera mode to take another picture.

䡲 Send to send your picture. (See page 125 for details.)

䡲 Upload to upload the picture you just took to the picture messaging Web site (www.plspictures.com). Depending on your settings, you may be prompted to accept a data connection.

䡲 Set as to assign the picture. Select an option and press .

䡲 Details/Edit to edit or display details relating to your pictures.

Section 2I: Using the Built-in Camera 115

䡲 Delete to delete the picture you just took.

䡲 Pictures In Camera to go to the In Camera folder to review your saved pictures.

To take a picture with the phone closed:

1.

Press and hold the side camera key to activate the camera mode.

2.

Point the camera lens at your subject. (You can check the picture framing through the external display screen.)

3.

Press the side camera key to take the picture. (The picture will automatically be saved in the In Camera folder.)

Registering Your Picture Messaging Account

The first time you use any of the picture management options involving the picture messaging Web site, you will need to register your picture messaging account and establish a password through your phone. This password will also allow you to sign in to the picture messaging Web site at www.plspictures.com

to access and manage your uploaded pictures and albums.

To register your picture messaging account:

1.

Press > Pictures > Online Albums > View Albums.

(You will be prompted to register your picture messaging account.)

2.

Enter a password for your picture messaging account and press .

(You will be prompted to confirm your password.)

3.

Please wait while the system creates your account.

Tip: Write down your picture messaging password in a secure place.

Once you have received confirmation that your account has been successfully registered, you may upload and share pictures and access the picture messaging Web site.


Camera Mode Options

When the phone is open and in camera mode, press Options (right softkey) to display additional camera options:

䢇 Picture Mode to select a picture mode from Normal, Beach/Snow,

Scenery, Night/Dark, or Soft Focus.

䢇 Zoom to zoom in on a subject. (See “Using the Zoom” on page 118 for details.)

䢇 Self-Timer to activate the camera’s timer. (See “Setting the

Self-Timer” on page 118 for details.)

䢇 Fun Tools to select an option from the following:

䡲 Multiple Shots to take multiple shots. (See “Taking Multiple

Shots” on page 119.)

䡲 Stitch Shot to take a stitch shot by stitching separate images together. (See “Taking Stitch Shots” on page 119.)

䡲 Fun Frames to select your favorite fun picture frame to decorate your picture.

䡲 Color Tone to select a wide variety of color tones for the picture.

䢇 Image Controls to select an option from Brightness or

White Balance.

䢇 Camera Settings to select your settings. (See “Selecting Camera

Settings” on page 120 for details.)

䢇 Pictures In Camera to go to your phone’s In Camera folder.

(See “In Camera Folder” on page 122 for details.)

䢇 Key Guidance to indicate the key functions in camera mode.

䢇 User Settings to select your favorite setting.


Setting the Self-Timer

To activate the self-timer:

1.

From camera mode, press Options (right softkey) > Self-Timer.

2.

Highlight the length of delay you want the timer to use (10 Seconds or 5 Seconds) and press .

3.

Press Start (left softkey) when you are ready to start the timer. ( appears on the upper right portion of the Main LCD during the selftimer countdown.)

4.

Get ready for the picture. (When the timer is down to three seconds, the self-timer icon will turn red and the phone will begin to beep.)

To cancel the self-timer after it has started:

䊳 Press Cancel (right softkey).

Note: While the self-timer is active, all keys are disabled except Back , END , and the right softkey ( Cancel ).

Using the Zoom

This feature allows you to zoom in on an object when you take a picture. You can adjust the zoom from 1 to 12 steps (except when Resolution is set to

High).

To use the zoom:

1.

From camera mode, press the navigation key right or left, or the side volume key up or down to adjust the zoom. (The gauge bar is displayed.)

2.

Press to take the picture.


Taking Multiple Shots

This feature allows you to take up to nine continuous shots in sequence.

When you take multiple shots, the icon will be displayed in the viewfinder.

To take multiple shots:

1.

From camera mode, press Options (right softkey)> Fun Tools >

Multiple Shots.

2.

Select an available option and press .

3.

Select the duration of the interval between shots (Normal or Fast ) and press .

4.

Press to take the pictures. (The Multiple Shots folder will be displayed, up to nine thumbnail pictures per screen.)

Taking Stitch Shots

Stitch Shot allows you to stitch separate images together. With this feature, your phone’s viewfinder is divided in two and you can shoot each part separately. When you shoot the first part, the camera displays a section of the previous part, so you can line up the next picture with the first one.

To take a stitch shot:

1.

From camera mode, press Options (right softkey) > Fun Tools >

Stitch Shot.

2.

Select Vertical or Horizontal.

䡲 Use your navigation key to switch the stitch display.

3.

To take the first picture, press .

4.

To take the second picture, press .


Selecting Camera Settings

To select your camera settings:

1.

From camera mode, press Options (right softkey) > Camera

Settings.

2.

Select one of the following options and press :

䡲 Resolution to select a picture’s file size (High-640x480,

Medium-320x240, or Low-160x120).

䡲 Quality to select the picture quality setting (Fine, Normal, or

Economy).

䡲 Shutter Sound to select a shutter sound (Default,

Say “Cheese,” or Off).

䡲 Status Bar to switch the status bar display on or off.

Setting Auto Delete

With this feature, pictures that have been uploaded to your online picture messaging account will automatically be erased from your phone.

To set Auto Delete:

1.

Press > Pictures > Settings & Info > Auto Delete.

2.


Viewing Your Account Information

To view your account information:

䊳 Press > Pictures > Settings & Info> Account Info.


Camera Icon Indication

Function

Beach/Snow

Icons Details

Use this setting in bright light.

Picture

Mode

Scenery

Night/Dark

Soft Focus

Sunny

White

Balance

Cloudy

Tungsten

Fluorescent

Manual

Brightness Manual

High

Resolution Medium

Low

Use this setting for scenery from a distance.

Use this setting in low light.

Use this setting to “soften” the picture.

Use this setting for sunny weather.

Use this setting for cloudy weather.

Use this setting for standard household lighting.

Use this setting for fluorescent lighting.

To set the white balance manually.

To set brightness manually.

For high picture resolution.

For medium picture resolution.

Self-Timer

Multiple Shots

For low picture resolution.

Numeric countdown will appear when the self-timer has been activated.

Use this setting for multiple shots.


Storing Pictures

Your phone’s picture storage area is called My Pictures. There are two types of storage areas for your pictures that can be used separately according to your needs:

䢇 In Camera (see below)

䢇 Saved to Phone (see page 124)

In Camera Folder

The storage area of your phone is called the In Camera folder. From the In

Camera folder, you can view pictures saved in your phone, send them to the picture messaging Web site (www.plspictures.com), delete images, and access additional options.

To review your pictures saved in the In Camera folder:

1.

Press > Pictures > My Pictures > In Camera. (Thumbnails will be displayed, up to nine at a time. )

2.

Use your navigation key to view and scroll through the pictures.


In Camera Folder Options

When you are viewing the In Camera folder, press Options (right softkey) to display the following options:

䢇 Thumbnail/Expand to switch to the Thumbnail/Expand view mode.

䢇 Upload to upload pictures from the In Camera folder to the picture messaging Web site (www.plspictures.com).

䢇 Set as to assign the picture. Select an option and press .

䢇 Details/Edit to edit or display details relating to your pictures.

䢇 Slideshow to view your pictures in slideshow mode.

䢇 Delete to delete pictures.

Note: Deleting data will free up memory space to enable you to take more pictures. Once deleted, the data cannot be uploaded to your online picture messaging account.

䢇 Save to Phone to save the selected pictures in the Saved to Phone folder.

䢇 Go to Saved to Ph. to display the Saved to Phone folder.

䢇 Camera Mode to activate camera mode.


Saved to Phone Folder

When you assign a picture, it will automatically be saved in the Saved to Ph. folder. The folder allows you to store copies of pictures on your phone and to assign pictures to various phone tasks.

To assign a picture and save it to the Saved to Phone folder:

1.

From the In Camera folder (see “In Camera Folder” on page 122), select a picture you wish to assign and save to the Saved to Phone folder.

2.

Press Options (right softkey) > Set as.

3.

Select an option. (A copy of the picture will automatically be saved to the Saved to Phone folder.)

To save multiple pictures to the Saved to Phone folder:

1.

From the In Camera folder, select pictures by pressing . (Multiple pictures can be selected.)

2.

Press Options (right softkey) > Save to Phone.

To view pictures stored in the Saved to Phone folder:

1.

Press > Pictures > My Pictures > Saved to Ph.

(Thumbnails will be displayed, up to nine at a time.)

2.

Use your navigation key to view and scroll.


Sending Pictures

Once you’ve taken a picture, you can use the messaging capabilities of your phone to instantly share your picture with family and friends. You can send pictures to up to 16 people at a time using their email addresses or their wireless phone numbers.

Sending Pictures From the In Camera Folder

To send pictures from the In Camera folder:

1.

Press > Pictures > My Pictures > In Camera.

2.

Highlight a picture you wish to send and press . (The check box in the lower right corner will be marked. You can select multiple pictures.)

3.

Press Send (left softkey). (You will see a message on the display.)

Note: The first time you send a picture, you will be prompted to establish a picture messaging Web site account and password. (See “Registering

Your Picture Messaging Account” on page 116.)

Tip:

4.

Select Recipients and one of the following options, and press :

䡲 Contacts to select recipients from your Contacts. Highlight a recipient and press to select.

䡲

䡲

Phone# to enter a phone number directly.

Email to enter an email address directly.

You can also press Others (right softkey) to select recipients from a list.


5.

Press Next (left softkey) when you have finished adding recipients.

(You may include up to 16 recipients per message.)

6.

If you wish to include a subject, scroll to Subj and enter your subject using the keypad.

7.

If you wish to include a text message, scroll to Text, and then enter your message using your keypad (or press Mode [right softkey] to change the input mode). (See “Entering Text” on page 36.)

8.

If you wish to include a voice message with the picture, scroll to

Audio and press Record (right softkey) to record. (Maximum recording time is 10 seconds.)

9.

Confirm the recipients, message, voice message, and picture.

(You may also select additional options by pressing the right softkey.

Follow the onscreen instructions to add available options.)

10.

Press the appropriate softkey to send the pictures.


Sending Pictures From Messaging

You can also send pictures from your phone’s Messaging menu.

To send pictures from the Messaging menu:

1.

Press > Messaging > Picture Msg > Compose (left softkey).

2.

Select From My Pictures, Take Picture, or Online Albums.

3.

Use the navigation key to select the picture you wish to send and press . (You can select multiple pictures.)

4.

Press Next (left softkey). To complete and send the pictures, follow steps 4-10 in “Sending Pictures From the In Camera Folder” on page 125.

Tip: To take and send a new picture from Messaging, select Take Picture during step 2 above. Then take the new picture, press Next (right softkey), and follow steps 4-10 in “Sending Pictures From the In Camera

Folder” on page 125.


Managing Pictures

Using the Picture Messaging Web Site

Once you have uploaded pictures from your phone to your online picture messaging account at www.plspictures.com (see “Uploading Pictures” on page 129), you can use your personal computer to manage your pictures.

From the picture messaging Web site (www.plspictures.com) you can share pictures, edit album titles, add captions, and organize images. You can even send your pictures to be printed at participating retail locations.

You will also have access to picture management tools to improve and customize your pictures. You’ll be able to lighten, darken, crop, add antique effects, add comic bubbles and cartoon effects, and use other features to transform your pictures.

To access the picture messaging Web site:

1.

From your computer’s Internet connection, go to www.plspictures.com

.

2.

Enter your phone number and picture messaging password to register. (See “Registering Your Picture Messaging Account” on page 116.)


Managing Online Pictures FromYour Phone

You can use your phone to manage, edit, or share pictures you have uploaded to the picture messaging Web site at www.plspictures.com.

(See “Uploading Pictures” below for information about uploading.)

To view your online pictures from your phone:

1.

Press > Pictures > Online Albums > View Albums.

2.

Highlight an album title and press to display thumbnail images.

Tip: To switch a selected picture from thumbnail view to expand view mode, press Options (right softkey) > Expand .

3.

Use your navigation key to select a picture.

4.

Press Options (right softkey) to display your online picture options.

Uploading Pictures

To upload pictures:

1.

Press > Pictures > My Pictures > In Camera.

2.

Select the picture(s) you wish to upload, and then press Options

(right softkey) > Upload.

3.

Select This, Selected, or All.

4.

Select “Uploads” Area or Other Albums.


Downloading Your Online Pictures

From your online albums display at www.plspictures.com, you can select pictures to download to your phone’s In Camera folder.

To download pictures from the picture messaging Web site:

1.

From the online pictures display, select the pictures you wish to download and press Options (right softkey). (See “Managing Online

Pictures From Your Phone” on page 129.)

2.

Select Save to Phone, and then select one of the following options and press :

䡲 Set as to assign the picture (Picture ID, Incoming Calls, or

Screen Saver). The downloaded pictures are stored in the

Saved to Phone folder.

䡲 Download Only to download the picture to the In Camera folder.

Accessing Online Picture Options From Your Phone

To access your online Picture options from your phone:

1.

Select a picture from your Online Albums. (See “Managing Online

Pictures From Your Phone” on page 129.)

2.

Press Options (right softkey) to display options.

3.


䡲 Thumbnail/Expand to switch to the Thumbnail/Expand view mode.

䡲 Copy/Move to copy or move pictures to a selected album.

䡲 Details/Edit to edit or display details relating to your pictures.

䡲 Delete to erase pictures saved in the current album (or Uploads folder).


䡲 Save to Phone to save the pictures to the In Camera folder.

䡲 Create Album to create a new album (from Uploads folder only).

䡲 Online Albums to switch the display to the online album list.

Note: The online Picture options may vary depending on the item you select.

To access your Online Albums options from your phone:

1.

Display the album list in the online picture messaging menu. (See

“Managing Online Pictures From Your Phone” on page 129.)

2.

Use your navigation key to select an album (or Uploads folder).

3.

Press Options (right softkey) to display options.

4.


䡲 Create Album to create a new album. Enter a new album name and press Save (left softkey).

䡲 Delete Album to delete the selected album.

䡲 Rename Album to rename the selected album.

䡲 Album Info to display detailed information about the album.

Note: The Uploads folder cannot be erased or renamed.


Section 2J

Using Bluetooth

®

In This Section

⽧ Turning Bluetooth On and Off (page 133)

⽧

Using the Bluetooth Settings Menu (page 134)

⽧

Bluetooth Profiles (page 137)

⽧

Pairing Bluetooth Devices (page 138)

⽧

Using the Trusted Devices Options (page 139)

⽧

Sending Data via Bluetooth (page 140)

Your phone features built-in Bluetooth technology, allowing you to

share information more easily than ever before. Bluetooth is a shortrange communications technology that allows you to connect wirelessly to a number of Bluetooth devices, such as headsets and hands-free car kits,

Bluetooth-enabled handhelds, PCs, printers, and wireless phones. The

Bluetooth communication range is usually up to approximately 10 meters

(30 feet).

This section details how to set up and make the most of your phone’s

Bluetooth capabilities.

132 Section 2J: Using Bluetooth

Turning Bluetooth On and Off

By default, your phone’s Bluetooth feature is turned off. Turning Bluetooth on makes your phone “available” to other in-range Bluetooth devices. To make your phone visible to other devices you must also set your phone’s visibility to other than Hidden. (See page 135.)

To turn Bluetooth on:

1.

Press > Settings > Bluetooth > Enable/Disable.

2.

Select Enable to enable Bluetooth.

To turn Bluetooth off:

1.

Press > Settings > Bluetooth >Enable/Disable.

2.

Select Disable to disable Bluetooth.

Note: Enabling the Bluetooth settings affects the battery’s talk and standby times.

Bluetooth Status Indicators

The following icons show your Bluetooth connection status at a glance:

䢇 – Bluetooth feature is active. It turns to green when connected to a

Bluetooth device.

䢇 – Your phone is discoverable by another Bluetooth device.

䢇 – Your phone is communicating with a Bluetooth device.

Section 2J: Using Bluetooth 133

Using the Bluetooth Settings Menu

The Bluetooth Settings menu allows you to set up many of the characteristics of your phone’s Bluetooth service, including:

䢇 Entering or changing the name your phone uses for Bluetooth communication

䢇 Setting your phone’s visibility (or “discoverability”) to other Bluetooth devices

䢇 Choosing a device for your Bluetooth calls.

䢇 Displaying your phone’s Bluetooth address

To access the Bluetooth Settings menu:

1.

Press > Settings > Bluetooth.

2.

Use the navigation key to select Enable/Disable, Visibility,

Voice Priority, My Device Name, or My Device Info, and press .

Bluetooth Settings: My Device Name

The My Device Name section of the Bluetooth Settings menu allows you to select a Bluetooth name for your phone. Your phone’s Bluetooth name will be seen by other in-range Bluetooth devices, depending on your Visibility settings.

To set a Bluetooth name for your phone:

1.

Press > Settings > Bluetooth > My Device Name.

2.

Press and hold to clear the current name.

3.

Use your keypad to enter a new name and press to save and exit.


Bluetooth Settings: Visibility

The Visibility section of the Bluetooth Settings menu allows you to manage your availability to other Bluetooth devices.

To configure your phone’s visibility (discoverability) to other

Bluetooth devices:

1.

Press > Settings > Bluetooth > Visibility.

2.

Select a Visibility setting and press :

䡲 Always Visible to allow other Bluetooth devices to detect and identify your phone.

䡲 Visible for 3 min. to allow other Bluetooth devices to detect your phone for 3 minutes, after which it returns to hidden mode.

䡲 Hidden to prevent other Bluetooth devices from detecting and identifying your phone.

Note: It is recommended that your phone is in standby mode when receiving data from other devices via Bluetooth.

Bluetooth Settings: Voice Priority

The Voice Priority section of the Bluetooth Settings menu allows you to choose the default device you want to use for incoming and outgoing calls.

To set the voice priority:

1.

Press > Settings > Bluetooth > Voice Priority.

2.

Select Phone or Hands-free.

䡲 Phone allows you to switch the audio between your phone and hands-free devices.

䡲 Hands-free allows only hands-free devices to be used.


Bluetooth Settings: My Device Information

To display your phone’s device information:

䊳 Press > Settings > Bluetooth > My Device Info.

Setting Auto-Accept

You can configure your phone’s accessibility to other Bluetooth devices.

To configure your phone’s accessibility to other Bluetooth devices:

1.

Press > Tools > Bluetooth.

2.

Select the device from the trusted devices list and press Options

(right softkey)> Auto-Accept.

3.

Select a setting and press :

䡲 On allows other Bluetooth devices to initiate a connection without any confirmation.

䡲 Off displays a confirmation screen, from which you can accept or deny the connection.


Bluetooth Profiles

All the Bluetooth settings you configure are stored in your phone’s Bluetooth user profile. Different profiles can be used for specific Bluetooth functions.

䢇 Headset Profile – This profile functions as a wireless ear jack. When an incoming call is received, the ringer can be heard through the headset instead of through the phone. The call can then be received by pushing a button. While using your phone, you can use the headset instead of the phone by pushing a button on the headset, the same as inserting a jack into the phone. Increase or decrease the volume by using the side volume key.

䢇 Hands-Free Profile – This profile functions as a wireless car-kit. Incoming calls ring to the hands-free headset or device. Calls can be received by pressing a button on the headset or device. For dialing, four functions are supported: recent call dial, voice dial, speed dial, and number dial. Increase or decrease the volume by using the side volume key.

䢇 DUN: Dial-Up Network Profile – This profile functions as a wireless data cable, connecting a PC or PDA to a network through your phone.

䢇 OPP: Object Push Profile – This profile uses the Generic Object

Exchange profile services to send data objects between devices and can be used to exchange business cards (vCard).


Pairing Bluetooth Devices

Paired Devices

The Bluetooth pairing process allows you to establish trusted connections between your phone and another Bluetooth device. When devices are paired, a passcode (sometimes called a PIN) is shared between devices, allowing for fast, secure connections while bypassing the discovery and authentication process.

Note: If Bluetooth is not enabled on your phone, you will be asked to enable it before you can proceed with the pairing process.

To pair your phone with another Bluetooth device:

1.

Press > Tools > Bluetooth > Add New > Search.

(Your phone will display a list of discovered in-range Bluetooth devices.)

2.

Select the device you wish to pair with and press .

3.

Select Add to Trusted.

4.

Enter the PIN and press . (When the owner of the other device enters the same PIN, the pairing is complete.)

Waiting for Request

If you are going to be using a Dial-Up Network (DUN) profile to pair with a PC or PDA, you will need to allow the other device to initiate pairing with your phone.

To allow your phone to be paired with another Bluetooth device:

1.

Press > Tools > Bluetooth > Add New > Wait for Request.

2.

Follow the onscreen prompts to enter your PIN and press .


Using the Trusted Devices Options

Once you have created paired devices, several options are available from the trusted devices list.

To use the trusted devices options:

1.

From the trusted devices list, select a device.

2.

Press Options (right softkey) to display the following options:

䡲 Connect or Disconnect to connect to or disconnect from the

Bluetooth device (if applicable).

䡲 Send Item to send an item saved on your phone to another

Bluetooth device.

䡲 Edit Name to edit the name of the trusted device.

䡲 Auto-Accept to configure your phone’s accessibility to other

Bluetooth devices. (See page 136.)

䡲 Device Info to display the trusted device’s information.

䡲 Sort by to sort the trusted devices.

䡲 Delete to delete the selected device from the list.

䡲 Delete All to delete all devices from the list.

䡲 Settings to display the Bluetooth settings menu.

(See page 134.)


Sending Data via Bluetooth

You can send data saved on your phone to another Bluetooth device.

To send data via Bluetooth:

1.

Press > Tools > Bluetooth.

2.

Select the device from the trusted devices list and then press

Options (right softkey) > Send Item.

3.

Select an item (Business Card or Contacts) and press .

4.

Follow the onscreen instructions to select the item(s) to send.

5.

Make sure the other device is ready to receive data, and then press

Send (left softkey).

6.

If necessary, enter the PIN and press .

Note: Due to different specifications and features of other Bluetoothcompatible devices, display and operations may be different, and functions such as transfer or exchange may not be possible with all

Bluetooth-compatible devices.


Section 3

Wireless Service Features

Section 3A

Wireless Service Features: The Basics

In This Section

⽧ Using Voicemail (page 143)

⽧

Using SMS Text Messaging (page 151)

⽧

Making a Three-Way Call (page 154)

⽧

Using Caller ID (page 155)

⽧

Responding to Call Waiting (page 155)

⽧

Using Call Forwarding (page 156)

Now that you’ve mastered your phone’s fundamentals, it’s time to explore the calling features that enhance your wireless service.

This section outlines your basic service features.

142 Section 3A: Wireless Service Features – The Basics

Using Voicemail

Setting Up Your Voicemail

All unanswered calls to your phone are automatically transferred to your voicemail, even if your phone is in use or turned off. Therefore, you will want to set up your voicemail and personal greeting as soon as your phone is activated.

To set up your voicemail:

1.

Press and hold .

2.

Follow the system prompts to:

䡲 Create your passcode.

䡲 Record your name announcement.

䡲 Record your greeting.

䡲 Choose whether to activate One-Touch Message Access (a feature that lets you access messages simply by pressing and holding passcode).

, bypassing the need for you to enter your

Note: Voicemail Passcode

If you are concerned about unauthorized access to your voicemail account, it is recommended that you enable your voicemail passcode.

(Do not activate One-Touch Message Access.)

Section 3A: Wireless Service Features – The Basics 143

Voicemail Notification

There are several ways your phone alerts you to a new message:

䢇 By displaying a message on the screen.

䢇 By sounding the assigned ringer type.

䢇 By the LED blinking red.

䢇 By displaying at the top of your screen.

New Voicemail Message Alerts

When you receive a new voice message, your phone alerts you and prompts you to call your voicemail.

To call your voicemail:

䊳 Press .

Note: When you are roaming off the home network, you may not receive notification of new voicemail messages. It is recommended that you periodically check your voicemail by dialing 1 + area code + your wireless phone number. When your voicemail answers, press (

*

) and enter your passcode. You will be charged roaming rates when accessing voicemail while roaming off the home network.

Your phone accepts messages even when it is turned off. However, you are notified of new messages only when your phone is turned on and you are in a home network service area.


Retrieving Your Voicemail Messages

You can review your messages directly from your wireless phone or from any other touch-tone phone. To dial from your wireless phone, you can either speed dial your voicemail or use the menu keys.

Using One-Touch Message Access

䊳 Press and hold voicemail box.)

. (Your phone will dial your

Using the Menu Keys on Your Phone to Access Your Messages

1.

Press > Messaging > Voicemail.

2.

Select Call Voicemail to listen to your messages.

Note: You are charged for airtime minutes when you are accessing your voicemail from your phone.

Using a Phone Other Than Your Phone to Access Messages

1.

Dial your wireless phone number.

2.

When your voicemail answers, press .

3.

Enter your passcode.

Tip: When you call into voicemail, you first hear the header information (date, time, and sender information) for the message. To skip directly to the message, press 4 during the header.


Voicemail Key Guide

Here’s a quick guide to your keypad functions while listening to voicemail messages. For further details and menu options, see “Voicemail Menu Key” on page 150.

Date/Time Send Reply Advance

Replay Rewind Forward

Erase Call Back Save

Cancel Help Skip

Voicemail Options

Your phone offers several options for organizing and accessing your voicemail.

Using Expert Mode

Using the Expert Mode setting for your personal voicemail box helps you navigate through the voicemail system more quickly by shortening the voice prompts you hear at each level.


To turn Expert Mode on or off:

1.

Press and hold to access your voicemail. (If your voicemail box contains any new or saved messages, press main voicemail menu.) to access the

2.

Press prompts.

to change your Personal Options, following the system

3.

Press

4.

Press for Expert Mode.

to turn Expert Mode on or off.

Setting Up Group Distribution Lists

Create up to 20 separate group lists, each with up to 20 entries.

1.

Press and hold to access your voicemail. (If your voicemail box contains any new or saved messages, press main voicemail menu.) to access the

2.

Press prompts.

to change your Personal Options, following the system

3.

Press for

4.

Press for Group Distribution Lists.

5.

Follow the voice prompts to review, create, edit, rename, or delete group lists.


Callback

Return a call after listening to a message without disconnecting from voicemail.

䊳 Press after listening to a message. (Once the call is completed, you’re returned to the voicemail main menu.)

Voicemail-to-Voicemail Message

Record and send a voice message to other voicemail users.

1.

From the main voicemail menu, press to send a message.

2.

Follow the voice prompts to enter the phone number.

3.

Follow the voice prompts to record and send your voice message.

Voicemail-to-Voicemail Message Reply

Reply to a voice message received from any other voicemail user.

1.

After listening to a voice message, press .

2.

Follow the voice prompts to record and send your reply.

Voicemail-to-Voicemail Message Forwarding

Forward a voice message, except those marked “Private,” to other voicemail users.

1.

After listening to a message, press .

2.

Follow the voice prompts to enter the phone number.

3.

Follow the voice prompts to record your introduction and forward the voice message.


Voicemail-to-Voicemail Receipt Request

Receive confirmation that your voice message has been listened to when you send or forward messages to or reply to messages from other users.

to listen to the 1.

After you have recorded a message, press recorded message.

2.

Press

3.

Press

4.

Press for more Options.

to mark receipt requested.

to send your voicemail message.

Extended Absence Greeting

When your phone is turned off or you are off the home network for an extended period, this greeting can be played instead of your normal personal greeting.

1.

From the main voicemail menu, press for Personal Options.

2.

Press

3.

Press for Greetings.

to record an Extended Absence Greeting.

Clearing the Message Icon

Your phone may temporarily continue to display the message icon after you have checked your voice and text messages.

To clear the icon from the display screen:

1.

Press > Messaging > Voicemail > Clear Count.

2.

Select Yes.


150

Voicemail Menu Key

Following the prompts on the voicemail system, you can use your keypad to navigate through the voicemail menu. The following list outlines your phone’s voicemail menu structure.

Listen

Envelope Information

Reply

Advance 8 Seconds

Replay

Rewind

Forward Message

Erase

Callback

Save

Options

Send a Message

Personal Options

Settings

Skip Passcode

Autoplay On/Off

Message Date & Time On/Off

Change Passcode

Group Distribution List

Numeric Paging to a Phone On/Off

Return to the Previous Menu

Greetings

Main Greetings

Recorded Name

Create and Extended Absence Greeting

Return to Personal Options Menu

Expert Mode (On/Off)

Place a Call

Disconnect

Section 3A: Wireless Service Features – The Basics

Using SMS Text Messaging

With SMS Text Messaging, you can use other people’s phone numbers to send instant text messages from your phone to their messaging-ready phones – and they can send messages to you.

In addition, SMS Text Messaging includes a variety of preset messages, such as “Can’t talk right now. Send me a message.” that make composing messages fast and easy. (See page 55 for details.) You can also customize your own preset messages (up to 50 characters) from your phone.

Composing SMS Text Messages

To compose an SMS Text message:

1.

Press > Messaging > Send Message > Text and select the entry method you prefer:

䡲 Contacts to select a recipient from your internal Contacts.

(Qualifying Contacts entries must contain a phone number or an email address.)

䡲 Phone# to use the keypad to enter the phone number of the person to whom you wish to send a message.

䡲 Email to enter the recipient’s email address.

Tip: You can also press Others (right softkey) to select recipients from a list.

2.

Press to save the recipient. (You may include up to 25 recipients per message.)

3.

Press Next (left softkey) when you have finished selecting and entering recipients.


Tip:

4.

Compose a message (up to 160 characters) or use the preset messages, smileys, or emoticons and press OK (left softkey).

䡲 To type a message, use your keypad to enter your message.

Press Mode (right softkey) to select a character input mode.

(See “Entering Text” on page 36.)

5.

Scroll down to select the message priority (Ordinary or Urgent), set the callback number, set the signature, or set the delivery receipt.

6.

Review your message and press Send (left softkey). (You may also select additional messaging options by pressing Options [right softkey] to change the recipients or save to drafts.)

You can also send an SMS Text message when the left softkey displays the Send Msg option.

Accessing SMS Text Messages

To read an SMS Text message:

䊳 When you receive a text message, it will be displayed automatically on your phone’s screen. Use your navigation key to scroll down and view the entire message.

Tip: If you have two or more notifications, the Missed Alert list will appear.

Select a message in the list and press View (left softkey) to view the message.


To reply to an SMS Text message:

1.

While the message is open, press Reply (left softkey).

– or –

Highlight the message in Inbox, and press Options (right softkey) >

Reply via > Text.

2.

Compose your reply or use the preset messages or icons and press OK (left softkey).

䡲 To type a message, use your keypad to enter your message.

Press Mode (right softkey) to select a character input mode.

3.

Review your reply and press Send (left softkey).

Using Preset Messages

Preset messages make sending text messages to your friends, family, and coworkers easier than ever. (For information on preset messages, see “Managing Preset Messages” on page 55.)

To send preset messages into the text box:

1.


2.

Highlight a message you wish to send and press Options (right softkey) > Send Text.


Making a Three-Way Call

With Three-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be charged for each of the two calls.

To make a Three-Way Call:

1.

Enter a number you wish to call and press .

2.

Once you have established the connection, press .

(This puts the first caller on hold.)

3.

Dial the second number you wish to call and press .

4.

When you’re connected to the second party, press again to begin your three-way call.

If one of the people you called hangs up during your call, you and the remaining caller stay connected. If you initiated the call and are the first to hang up, all other callers are disconnected.


Using Caller ID

Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, just follow these easy steps.

To block your phone number from being displayed for a specific outgoing call:

1.

Press .

2.

Enter the number you want to call.

3.

Press .

To permanently block your number, contact your service provider.

Responding to Call Waiting

When you’re on a call, Call Waiting alerts you to incoming calls by sounding one beep. Your phone’s screen informs you that another call is coming in and displays the caller’s phone number (if it is available).

To respond to an incoming call while you’re on a call:

䊳 Press call.)

. (This puts the first caller on hold and answers the second

To switch back to the first caller:

䊳 Press again.

Tip: For those calls where you don’t want to be interrupted, you can temporarily disable Call Waiting by pressing * 7 0 before placing your call. Call Waiting is automatically reactivated once you end the call.


Using Call Forwarding

Call Forwarding lets you forward all your incoming calls to another phone number – even when your phone is turned off. You can continue to make calls from your phone when Call Forwarding is activated.

To activate Call Forwarding:

1.

Press .

2.

Enter the area code and phone number to which calls should be forwarded.

3.

Press . (You will hear a tone to confirm the activation of Call

Forwarding.)

To deactivate Call Forwarding:

1.

Press .

2.

Press . (You will hear a tone to confirm the deactivation.)

Note: You are charged a higher rate for calls you have forwarded.


Section 3B

Data Services

In This Section

⽧ Data Services Applications (page 158)

⽧

Getting Started With Data Services (page 159)

⽧

Accessing Messaging (page 164)

⽧

Downloading Content (page 166)

⽧

Exploring the Web (page 168)

Data services offer easy and amazing data services you will

really use. These features – including messaging, games, downloadable ringers and screen savers, and portable Web access – let you have fun, stay in touch, and stay informed no matter where you go on the network.

This section introduces these advanced services and walks you through the necessary steps to start taking advantage of your phone’s data services.

Section 3B: Data Services 157

Data Services Applications

Here is a brief list of the applications available through your phone. For more information, please contact your service provider.

Picture Messaging – Instantly shoot, share, and print sharp, highresolution digital pictures with your phone.

Messaging – Send and receive email messages and chat on your phone.

Games – Play exciting games with full-color graphics, sound, and vibration.

Choose from hundreds of games to play anytime.

Ringers – Personalize your phone by downloading and assigning different ringers to numbers in your Contacts.

Screen Savers – Download unique images to use as screen savers – or make it easy to tell who’s calling by assigning specific images to numbers in your Contacts.

Web – Experience full-color graphic versions of popular Web sites from your phone.

158 Section 3B: Data Services

Getting Started With Data Services

With your wireless phone and service, you are ready to start enjoying the advantages of data services. This section will help you learn the basics of using your data services, including managing your user name, launching a data connection, and navigating the Web with your phone.

Your User Name

When you buy a compatible phone and sign up for service, you’re automatically assigned a user name, which is typically your 10-digit wireless phone number.

When you use data services, your user name is submitted to identify you to the network. The user name is also useful as an address for email, as a way to personalize Web services, and as an online virtual identity.

Your user name will be automatically programmed into your phone. You don’t have to enter it.

Updating Your User Name

When you change the programmed user name and select a new one, you can update your user name through your phone.

To update your user name:

䊳 Press > Settings > Web > Update Profile.

(To cancel, press

END before completing the update process.)

Finding Your User Name

If you aren’t sure what your user name is, you can easily find it online or on your phone.

To find your user name:



Launching a Data Connection

To launch a data connection:

䊳 Press > Web. (Your data connection will start and the home page will be displayed.)

Note: If Net Guard is enabled and displayed (see below), press OK (left softkey) to continue and access the Web.

While connecting, an animation will be displayed on the screen.

If you had a previous data connection, you may not see the animation when you start the session again.

Net Guard

When you first connect to the Web, the Net Guard will be displayed to confirm that you want to connect. This feature helps you avoid accidental connections. You can disable the Net Guard in the future by selecting

Always Auto-Connect when the Net Guard is displayed.

To change your Net Guard settings:

䊳 Press > Settings > Web > Net Guard.

䡲 Select On to activate the Net Guard.

䡲 Select Off to deactivate the Net Guard.

Note: When enabled, the Net Guard appears only once as long as you have not turned the phone off and on.


Data Connection Status and Indicators

Your phone’s display lets you know the current status of your data connection through indicators which are displayed at the top of the screen.

The following symbols are used:

Your data connection is active (data is being transferred); the transmit/receive symbol will blink to indicate data transmission.

Incoming voice calls go directly to voicemail; outgoing voice calls can be made, but the data connection will terminate.

Your data connection is dormant (no data is being sent or received).

Though not currently active, when dormant the phone can restart an active connection quickly; voice calls can be made and received.

Your phone is not currently able to access data service features.

If no indicator is displayed, your phone does not have a current data connection. To launch a connection, see “Launching a Data Connection” on page 160.


Navigating the Web

Navigating through menus and Web sites during a data session is easy once you’ve learned a few basics. Here are some tips for getting around:

Softkeys

During a data session, the bottom line of your phone’s display contains one or more softkeys. Softkeys are shortcut controls for navigating around the

Web, and they correspond to the keys directly below the phone’s display screen.

Tip: Depending on which Web sites you visit, the labels on the softkeys may change to indicate their function.

To use softkeys:

䊳 Press a softkey. (If an additional pop-up menu is displayed when you press the softkey, select the menu items using your keypad [if they’re numbered], or by highlighting the option and pressing .)

Scrolling

As with other parts of your phone’s menu, you’ll have to scroll up and down to see everything on some Web sites.

To scroll line by line through Web sites:

䊳 Press the navigation key up or down.

To scroll page by page through Web sites:

䊳 Press the side volume key.


Selecting

Once you’ve learned how to use softkeys and scroll, you can start navigating the Web.

To select onscreen items:

䊳 Use the navigation key to highlight an item, and then press a softkey (or press ).

Tips: You’ll find that the left softkey is used primarily for selecting items. This softkey is often labeled “Go.”

If the items on a page are numbered, you can use your keypad (number keys) to select an item. (The tenth item in a numbered list may be selected by pressing 0 key on your phone’s keypad, even though the number 0 doesn’t appear on the screen.)

Links, which are displayed as underlined text, allow you to jump to different

Web pages, select special functions, or even place phone calls.

To select links:

䊳 Highlight the link and press the appropriate softkey.

Going Back

To go back one page:

䊳 Press the key on your phone.

Note: The BACK key is also used for deleting text (like a BACKSPACE key) when you are entering text.

Going Home

To return to the home page from any other Web page:

䊳 Press and hold .

– or –

Press the right softkey > Home > OK (left softkey).


Accessing Messaging

You can send and receive emails, text messages, and picture messages right from your phone. Messaging allows you to stay connected to friends, family, and coworkers 24 hours a day anywhere on the home network.

Note: For details on text messaging, see “Using SMS Text Messaging” on page 151. For details on picture messaging, see “Sending Pictures” on page 125.

Accessing Email Providers

With data services, you can use popular email services such as Yahoo!

® Mail to keep in touch, even while you’re on the go.

To access email providers from your phone:

1.

From the home page, select Messaging > Email.

2.

Select an email provider.

3.

Use your keypad to enter the required sign-in information for the selected provider, such as user name, email address, or password, and select Sign In. (Your mailbox for the selected provider will be displayed.)

Note: The information required to sign in will vary depending on the email provider you are accessing.

4.

Follow the onscreen instructions to read, reply to, compose, send, and manage messages in your email account.


Accessing Instant Messaging

Data services also provide you with access to popular instant messaging

(IM) clients, including AOL ® Instant Messenger TM and Yahoo!

® Messenger.

To access instant messaging clients from your phone:

1.

From the home page, select Messaging > Instant Messaging.

2.

Select an IM provider, such as AOL or Yahoo!.

3.

Use your keypad to enter the required sign-in information for the selected provider, such as user name or password, and select

Sign In. (Your IM screen for the selected provider will be displayed.)

Note: The information required to sign in will vary depending on the instant messaging provider you are accessing.

4.

Follow the onscreen instructions to read, reply to, compose, send, and manage messages in your IM account.


Downloading Content

With data services, you have access to a dynamic variety of downloadable content, such as downloadable Games, Ringers, Screen Savers, and other applications. (Additional charges may apply.) The basic steps required to access and download Premium Services content are outlined below.

Accessing the My Content Menus

To access the download menus:

1.

Press > My Content.

2.

Select the type of file or service (Games, Ringers, Screen Savers, or Applications).

3.

Select Get New (if applicable). (The browser will start and take you to the corresponding download menu.)

To access the download menus from the Web browser:

䊳 From the home page, select Downloads > Games, Ringers,

Screen Savers, or other items to go to the corresponding download menu. (For more information on navigating the Web, see “Navigating the Web” on page 162.)

Selecting an Item to Download

You can search for available items to download in a number of ways:

䢇 Featured displays a rotating selection of featured items.

䢇 Browse Category allows you to narrow your search to a general category, such as Country or Pop/Rock for Ringers or For the Ladies for

Screen Savers. (There may be several pages of available content in a list. Select Next 9 to view additional items.)

䢇 Search allows you to use your keypad to enter search criteria to locate an item. You may enter an entire word or title or perform a partial-word search.


Downloading an Item

Once you’ve selected an item you wish to download, highlight it and press , or select Go (left softkey). You will see a summary page for the item including its title, the vendor, the download details, the file size, and the cost. Links allow you to view the License Details page, which outlines the price, license type, and length of license for the download; and the

Terms of Use page, which details the Premium Services Terms of Use and your responsibility for payment.

To download a selected item:

1.

From the information page, select Buy. (The item will download automatically. When the New Download screen is displayed, the item has been successfully downloaded to your phone.)

Note: If you have not previously purchased an item, you will be prompted to create your purchasing profile.

2.

Once the item has been successfully downloaded and the completed screen appears, select an option to assign the ringer or screen saver, run the application, listen to music, play the game, etc.


Exploring the Web

With Web access on your phone, you can browse full-color graphic versions of your favorite Web sites, making it easier than ever to stay informed while on the go. Follow sports scores, breaking news and weather, and shop on your phone anywhere on the home network.

In addition to the features already covered in this section, the home page offers access to these colorful, graphically rich Web categories, including

News, Weather, Entertainment, Sports, and Money, as well as useful management options including Search. Many sites are available under more than one menu – choose the one that’s most convenient for you.

Using the Browser Menu

Navigating the Web from your phone using the home page is easy once you get the hang of it. For details on how to navigate the Web, select menu items, and more, see “Navigating the Web” on page 162.

Although the home page offers a broad and convenient array of sites and services for you to browse, not all sites are represented, and certain functions, such as going directly to specific Web sites, are not available. For these and other functions, you will need to use the browser menu. The browser menu offers additional functionality to expand your use of the Web on your phone.

Opening the Browser Menu

The browser menu may be opened anytime you have an active data session, from any page you are viewing.

To open the browser menu:

䊳 Press the right softkey from any page during an active data session.

(The browser menu will be displayed.) (To launch a data session, please see “Launching a Data Connection” on page 160.)


Options available under the browser menu include:

䢇 Home. Returns the browser to the home page.

䢇 Forward. Allows you to go forward to the pages you have visited.

䢇 Mark this page. Allows you to create new bookmarks.

䢇 View Bookmarks. Allows you to view and access bookmarked sites.

䢇 Search. Launches a Web search.

䢇 Send page. Allows you to send the URL you’re viewing through

SMS Text Messaging.

䢇 Go to URL.... Allows you to navigate directly to a Web site by entering its URL (Web site address).

䢇 History. Displays the pages you have visited.

䢇 Refresh this page. Reloads the current Web page.

䢇 More.... Displays the additional menu options.

䡲 Show URL. Displays the URL (Web site address) of the site you’re currently viewing.

䡲 Restart Browser. Refreshes the current browser session.

䡲 About Browser. Allows you to display your browser’s information.

䡲 Preferences. Allows you to configure and manage your browser settings (Edit Home Page, Revert Home Page, Launch

Page, Font Size, Color Settings, Show Images, Delete Cookies,

Send Referrer, Title Tag, and Sound Volume).


Creating a Bookmark

Bookmarks allow you to store the addresses of your favorite Web sites for easy access at a later time.

To create a bookmark:

1.

Go to the Web page you want to mark.

2.

Press the right softkey to open the browser menu.

3.

Select Mark this page and press .

4.

Press Save (left softkey) to save the bookmark.

Note: Bookmarking a page does not store the page’s contents, just its address.

Some pages cannot be bookmarked. Whether a particular Web page may be marked is controlled by its creator.

Accessing a Bookmark

To access a bookmark:

1.


2.

Select View Bookmarks > OK (left softkey).

3.

Scroll to highlight the bookmark you’d like to access and press to go to the Web site.


Deleting a Bookmark

To delete a bookmark:

1.


2.

Select View Bookmarks > OK (left softkey).

3.

Scroll to highlight the bookmark you’d like to delete and press the right softkey.

4.

Select Delete. (A confirmation screen will be displayed.)

5.

Press Yes (right softkey) to remove the bookmark.

Going to a Specific Web site

To go to a particular Web site by entering a URL (Web site address):

1.

Connect to the Web and press the right softkey to display the browser menu.

2.

Select Go to URL...

3.

Select Input Address > OK (left softkey).

4.

Use your keypad to enter the URL of the Web site you wish to go to and press OK (left softkey).

Note: Not all Web sites are viewable on your phone.

Reloading a Web Page

To reload (refresh) a Web page:

1.


2.

Select Refresh this page > OK (left softkey).


Sending a Web Page

This feature allows you to send a URL (Web site address) you’re viewing through SMS Text Messaging.

To send a Web page:

1.

From an active data connection, press the right softkey to display the browser menu.

2.

Select Send page > OK (left softkey).

3.

To complete and send a Web Page, follow steps 2–6 in “Composing

SMS Text Messages” on page 151.

Restarting the Web Browser

If the Web browser seems to be malfunctioning or stops responding, you can usually fix the problem by simply restarting the browser.

To restart the Web browser:

1.

From an active data connection, press the right softkey to display the browser menu.

2.

Select More... > OK (left softkey).

3.

Select Restart Browser > OK (left softkey).


Section 4

Safety and Warranty

Information

Section 4A

Important Safety Information

In This Section

⽧ General Precautions (page 175)

⽧

Maintaining Safe Use of and Access to Your Phone (page 176)

⽧

Using Your Phone With a Hearing Aid Device (page 178)

⽧

Caring for the Battery (page 180)

⽧

Radio Frequency (RF) Energy (page 181)

⽧

Owner’s Record (page 184)

⽧

Phone Guide Proprietary Notice (page 184)

This phone guide contains important operational and safety

information that will help you safely use your phone. Failure to read and follow the information provided in this phone guide may result in serious bodily injury, death, or property damage.

174 Section 4A: Important Safety Information

General Precautions

There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service.

䢇 To maximize performance, do not touch the bottom portion of your phone where the internal antenna is located while using the phone.

䢇

䢇

Speak directly into the mouthpiece.

Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off and remove the battery.

䢇

䢇

䢇

Do not expose your phone to direct sunlight for extended periods of time (such as on the dashboard of a car).

Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending, or sitting on it.

Any changes or modifications to your phone not expressly approved in this document could void your warranty for this equipment and void your authority to operate this equipment.

Note: For the best care of your phone, only authorized personnel should service your phone and accessories. Failure to do so may be dangerous and void your warranty.

Section 4A: Important Safety Information 175

Maintaining Safe Use of and Access to

Your Phone

Do Not Rely on Your Phone for Emergency Calls

Mobile phones operate using radio signals, which cannot guarantee connection in all conditions. Therefore you should never rely solely upon any mobile phone for essential communication (e.g., medical emergencies). Emergency calls may not be possible on all cellular networks or when certain network services or mobile phone features are in use.

Check with your local service provider for details.

Using Your Phone While Driving

Talking on your phone while driving (or operating the phone without a hands-free device) is prohibited in some jurisdictions. Laws vary as to specific restrictions. Remember that safety always comes first.

Following Safety Guidelines

To operate your phone safely and efficiently, always follow any special regulations in a given area. Turn your phone off in areas where use is forbidden or when it may cause interference or danger.

Using Your Phone Near Other Electronic Devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However,

RF signals from wireless phones may affect inadequately shielded electronic equipment.

RF signals may affect improperly installed or inadequately shielded electronic operating systems or entertainment systems in motor vehicles. Check with the manufacturer or their representative to determine if these systems are adequately shielded from external RF signals. Also check with the manufacturer regarding any equipment that has been added to your vehicle.

Consult the manufacturer of any personal medical devices, such as pacemakers and hearing aids, to determine if they are adequately shielded from external RF signals.

Note: Always turn off the phone in healthcare facilities, and request permission before using the phone near medical equipment.

Turning Off Your Phone Before Flying

Turn off your phone before boarding any aircraft. To prevent possible interference with aircraft systems, the U.S. Federal Aviation Administration (FAA) regulations require you to have permission from a crew member to use your phone while the plane is on the ground. To prevent any risk of interference, FCC regulations prohibit using your phone while the plane is in the air.


Turning Off Your Phone in Dangerous Areas

To avoid interfering with blasting operations, turn your phone off when in a blasting area or in other areas with signs indicating two-way radios should be turned off. Construction crews often use remote-control RF devices to set off explosives.

Turn your phone off when you’re in any area that has a potentially explosive atmosphere.

Although it’s rare, your phone and accessories could generate sparks. Sparks can cause an explosion or fire, resulting in bodily injury or even death. These areas are often, but not always, clearly marked. They include:

䢇 Fueling areas such as gas stations.

䢇 Below deck on boats.

䢇 Fuel or chemical transfer or storage facilities.

䢇 Areas where the air contains chemicals or particles such as grain, dust, or metal powders.

䢇 Any other area where you would normally be advised to turn off your vehicle’s engine.

Note: Never transport or store flammable gas, flammable liquids, or explosives in the compartment of your vehicle that contains your phone or accessories.

Restricting Children’s Access to Your Phone

Your phone is not a toy. Do not allow children to play with it as they could hurt themselves and others, damage the phone or make calls that increase your invoice.


Using Your Phone With a Hearing Aid Device

Your phone has been tested for hearing aid device compatibility. When some wireless phones are used with certain hearing devices (including hearing aids and cochlear implants), users may detect a noise which can interfere with the effectiveness of the hearing device.

Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference noise they may generate. ANSI standard C63.19 was developed to provide a standardized means of measuring both wireless phone and hearing devices to determine usability rating categories for both.

Ratings have been developed for mobile phones to assist hearing device users find phones that may be compatible with their hearing device. Not all phones have been rated for compatibility with hearing devices. Phones that have been rated have a label located on the box. Your KATANA II by SANYO has an M4 rating .

These ratings are not guarantees. Results will vary depending on the user’s hearing device and individual type and degree of hearing loss. If a hearing device is particularly vulnerable to interference noise; even a phone with a higher rating may still cause unacceptable noise levels in the hearing device. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.

M-Ratings : Phones rated M3 or M4 meet FCC requirements for hearing aid compatibility and are likely to generate less interference to hearing devices than unrated phones. (M4 is the better/higher of the two ratings.)

T-Ratings : Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch”or “Telephone Switch”) than unrated phones. (T4 is the better/higher of the two ratings. Note that not all hearing devices have telecoils in them.)

Hearing aid devices may also be measured for immunity to interference noise from wireless phones and should have ratings similar to phones. Ask your hearing healthcare professional for the rating of your hearing aid. Add the rating of your hearing aid and your phone to determine probable usability:

䢇 Any combined rating equal to or greater than six offers excellent use.

䢇 Any combined rating equal to five is considered normal use.

䢇 Any combined rating equal to four is considered usable.

Thus, if you pair an M3 hearing aid with an M3 phone, you will have a combined rating of six for “excellent use.”This is synonymous for T ratings.


It is further suggested you experiment with multiple phones (even those not labeled M3/T3 or

M4/T4) while in the store to find the one that works best with your hearing aid device. Should you experience interference or find the quality of service unsatisfactory after purchasing your phone, promptly return it to the store where purchased for exchange or refund. More information about hearing aid compatibility may be found at: www.fcc.gov, www.fda.gov, and www.accesswireless.org.

Getting the Best Hearing Device Experience

With Your Phone

To further minimize interference:

䢇 Set the phone’s Display and Keypad backlight settings to ensure the minimum time interval:

1.

Press > Settings > Display > Backlight .

2.

Select Main LCD, Key , or Sub LCD .

䢇

3.

Select the minimum time interval setting and press .

Position the phone so the internal antenna is farthest from your hearing aid.

䢇 Move the phone around to find the point with least interference.


Caring for the Battery

Protecting Your Battery

The guidelines listed below help you get the most out of your battery’s performance.

䢇 Recently there have been some public reports of wireless phone batteries overheating, catching fire or exploding. It appears that many, if not all, of these reports involve counterfeit or inexpensive, aftermarket-brand batteries with unknown or questionable manufacturing standards. SANYO is not aware of similar problems with SANYO phones resulting from the proper use of batteries and accessories approved by SANYO. Use only manufacturer-approved batteries and accessories found through your phone’s manufacturer. Buying the right batteries and accessories is the best way to ensure they’re genuine and safe.

䢇 In order to avoid damage, charge the battery only in temperatures that range from 32° F to 113° F (0° C to 45° C).

䢇 Don’t use the battery charger in direct sunlight or in high humidity areas, such as the bathroom.

䢇 Never dispose of the battery by incineration.

䢇 Keep the metal contacts on top of the battery clean.

䢇 Don’t attempt to disassemble or short-circuit the battery.

䢇 The battery may need recharging if it has not been used for a long period of time.

䢇 It’s best to replace the battery when it no longer provides acceptable performance. It can be recharged hundreds of times before it needs replacing.

䢇 Don’t store the battery in high temperature areas for long periods of time. It’s best to follow these storage rules:

Less than one month:

-4° F to 140° F (-20° C to 60° C)

More than one month:

-4° F to 113° F (-20° C to 45° C)

Disposal of Lithium Ion (Li-Ion) Batteries

Do not handle a damaged or leaking Li-Ion battery as you can be burned.

For safe disposal options of your Li-Ion batteries, contact your nearest authorized service center.

Special Note: Be sure to dispose of your battery properly. In some areas, the disposal of batteries in household or business trash may be prohibited.


Radio Frequency (RF) Energy

Understanding How Your Phone Operates

Your phone is basically a radio transmitter and receiver. When it’s turned on, it receives and transmits radio frequency (RF) signals. When you use your phone, the system handling your call controls the power level. This power can range from 0.006 watt to 0.2 watt in digital mode.

Knowing Radio Frequency Safety

The design of your phone complies with updated NCRP standards described below.

In 1991–92, the Institute of Electrical and Electronics Engineers (IEEE) and the American

National Standards Institute (ANSI) joined in updating ANSI’s 1982 standard for safety levels with respect to human exposure to RF signals. More than 120 scientists, engineers and physicians from universities, government health agencies and industries developed this updated standard after reviewing the available body of research. In 1993, the Federal

Communications Commission (FCC) adopted this updated standard in a regulation. In August

1996, the FCC adopted hybrid standard consisting of the existing ANSI/IEEE standard and the guidelines published by the National Council of Radiation Protection and Measurements

(NCRP).

Body-Worn Operation

To maintain compliance with FCC RF exposure guidelines, if you wear a handset on your body, use the supplied or approved carrying case, holster or other body-worn accessory. If you do not use a body-worn accessory, ensure the antenna is at least 2.2 centimeters from your body when transmitting. Use of non-approved accessories may violate FCC RF exposure guidelines.

For more information about RF exposure, visit the FCC Web site at www.fcc.gov.


Specific Absorption Rates (SAR) for Wireless Phones

The SAR is a value that corresponds to the relative amount of RF energy absorbed in the head of a user of a wireless handset.

The SAR value of a phone is the result of an extensive testing, measuring and calculation process. It does not represent how much RF the phone emits. All phone models are tested at their highest value in strict laboratory settings. But when in operation, the SAR of a phone can be substantially less than the level reported to the FCC. This is because of a variety of factors including its proximity to a base station antenna, phone design and other factors. What is important to remember is that each phone meets strict federal guidelines. Variations in SARs do not represent a variation in safety.

All phones must meet the federal standard, which incorporates a substantial margin of safety. As stated above, variations in SAR values between different model phones do not mean variations in safety. SAR values at or below the federal standard of 1.6 W/kg are considered safe for use by the public.

The highest reported SAR values of the KATANA II (SCP-6650) are:

Cellular CDMA mode (Part 22):

Head: 0.221 W/kg; Body-worn: 0.279 W/kg

PCS mode (Part 24):

Head: 0.554 W/kg; Body-worn: 0.258 W/kg

FCC Radio Frequency Emission

This phone meets the FCC Radio Frequency Emission Guidelines.

FCC ID number: AEZSCP-6650.

More information on the phone’s SAR can be found from the following FCC Web site: http://www.fcc.gov/oet/fccid.


FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

䢇

䢇

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

䢇 Reorient the direction of the internal antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

䢇 Consult the dealer or an experienced radio/TV technician for help.


Owner’s Record

The model number, regulatory number, and serial number are located on a nameplate inside the battery compartment. Record the serial number in the space provided below. This will be helpful if you need to contact us about your phone in the future.

Model: KATANA ® II by SANYO ®

Serial No.:

Phone Guide Proprietary Notice

CDMA Technology is licensed by QUALCOMM Incorporated under one or more of the following patents:

4,901,307 5,109,390 5,267,262 5,416,797

5,506,865 5,544,196 5,657,420 5,101,501

5,267,261 5,414,796 5,504,773 5,535,239

5,600,754 5,778,338 5,228,054 5,337,338

5,710,784 5,056,109 5,568,483 5,659,569

5,490,165 5,511,073

T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437,

U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other patents pending.

Phone Guide template version 6A-VI_3 (May 2006)


Section 4B

Manufacturer’s Warranty

In This Section

⽧ Manufacturer’s Warranty (page 186)

Your phone has been designed to provide you with reliable,

worry-free service. If for any reason you have a problem with your equipment, please refer to the manufacturer’s warranty in this section.

For information regarding the terms and conditions of service for your phone, please contact your service provider.

Section 4B: Warranty 185

Manufacturer’s Warranty

Manufacturer’s Limited Warranty

SANYO FISHER COMPANY (“SANYO”) offers you, the original purchaser who has purchased the enclosed subscriber unit (“Product”) only from an authorized dealer in the

United States, a limited warranty that the Product, including accessories in the Product’s package, will be free from defects in material or workmanship as follows:

A. ONE (1) YEAR LIMITED WARRANTY: For a period of one (1) year from the date of original purchase, SANYO will, at its option, either repair or replace a defective Product (with new or rebuilt parts/replacements).

B. LIMITED WARRANTY ON REPAIRED/REPLACED PRODUCTS: For a period equal to the remainder of the limited warranty period on the original Product or, on warranty repairs which have been effected on Products for 90 days after the date of its repair or replacement, whichever is longer, SANYO will repair or replace (with new or rebuilt parts/replacements) defective parts or Products used in the repair or replacement of the original Product under the Limited Warranty on it.

Proof that the Product is within the warranty period in the form of a bill of sale or warranty repair document that includes the date of purchase, Product serial number and the authorized dealer’s name and address, must be presented to obtain warranty service. This limited warranty is not transferable to any third party, including but not limited to any subsequent purchaser or owner of the Product. Transfer or resale of a Product will automatically terminate warranty coverage with respect to it.

This limited warranty covers batteries only if battery capacity falls below 80% of rated capacity or the battery leaks. Also this limited warranty does not cover any battery if (i) the battery has been charged by a battery charger not specified or approved by SANYO for charging the battery, (ii) any of the seals on the battery are broken or show evidence of tampering, or (iii) the battery has been used in equipment other than the SANYO phone for which it is specified.

186 Section 4B: Warranty

This limited warranty does not cover and is void with respect to the following: (i) Products which have been improperly installed, repaired, maintained or modified (including the antenna); (ii) Products which have been subjected to misuse (including Products used in conjunction with hardware electrically or mechanically incompatible or Products used with software, accessories, goods or ancillary or peripheral equipment not supplied or expressly authorized by SANYO for use), abuse, accident, physical damage, abnormal use or operation, improper handling or storage, neglect, exposure to fire, water or excessive moisture or dampness or extreme changes in climate or temperature, (iii) Products operated outside published maximum ratings; (iv) cosmetic damage; (v) Products on which warranty stickers or Product serial numbers have been removed, altered, or rendered illegible; (vi) customer instruction; (vii) cost of installation, set up, removal or reinstallation; (viii) signal reception problems (unless caused by defect in material or workmanship); (ix) damage the result of fire, flood, acts of God or other acts which are not the fault of SANYO and which the Product is not specified to tolerate, including damage caused by mishandling and blown fuses; (x) consumables (such as memory cards, fuses, etc.); or (xi) any Products which have been opened, repaired, modified or altered by anyone other than SANYO or a SANYO authorized service center.

This warranty is valid only in the United States.

REPAIR OR REPLACEMENT, AS HEREINABOVE PROVIDED, IS YOUR SOLE

AND EXCLUSIVE REMEDY FOR BREACH OF THE LIMITED WARRANTY.

SANYO SHALL HAVE NO LIABILITY FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO LOSS OF

PROFITS, LOST SALES, LOSS OF DATA, LOSS OF USE OF THE PRODUCT, OR

ANTICIPATED PROFITS ARISING OUT OF USE OR INABILITY TO USE ANY

PRODUCT (FOR EXAMPLE, WASTED AIRTIME CHARGES DUE TO THE

MALFUNCTION OF A PRODUCT). THIS WARRANTY DOES NOT COVER

PRODUCTS SOLD “AS IS” OR “WITH ALL FAULTS”. SANYO MAKES NO

OTHER EXPRESS WARRANTY WITH RESPECT TO THE PRODUCTS. THE

DURATION OF IMPLIED WARRANTIES, INCLUDING IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IS

LIMITED TO THE DURATION OF THIS EXPRESS WARRANTY.

Section 4B: Warranty 187

Some States do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you.

This limited warranty gives you specific legal rights, and you may have other rights which vary from State to State.

To obtain warranty service, contact

SANYO Fisher Company

Attention : Customer Services for Wireless Products

Phone : 866-SANYOWC (866-726-9692)

Web : http://www.sanyowireless.com

This product contains NetFront Browser of ACCESS CO., LTD. ACCESS and NetFront are trademarks or registered trademarks of ACCESS CO., LTD. in Japan and other countries. This software is based in part on the work of the

Independent JPEG Group.

Copyright © 2007 InnoPath Software. All rights reserved.

The Bluetooth wordmark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by SANYO is under license. Other trademarks and trade names are those of their respective owners.

188 Section 4B: Warranty

Index

A

Abbreviated Dialing 64

Airplane Mode 57

Alarm Clock 101

Alert Notification 47

Answering Calls 25

Any Key Answer 63

AOL Instant Messenger 165

B

Backlight 48

Battery 17–19

Capacity 17

Charging 19

Disposal 180

Installing 18

Removing 18

Bluetooth 132–140

Auto-Accept 136

Device Name 134

Pairing 138

Profiles 137

Sending Data 140

Settings 134

Trusted Devices 139

Visibility 135

Voice Priority 135

C

Calculator 103

Calendar 96–100

Adding an Event 96

Erasing Events 98

Event Alerts 97

Call Alarm 99

Call Forwarding 156

Call Guard 79

Call History 81–85

Erasing 85

Making a Call 84

Options 83

Prepending a Phone Number

85

Saving a Number 84

Viewing 82

Call Waiting 155

Caller ID 155

Camera 114–131

Multiple Shots 119

Options 117

Self-Timer 118

Settings 120

Stitch Shots 119

Taking Pictures 115

Zoom 118

Contacts 86–94

Adding an Entry 87

Editing an Entry 90

Erasing 92

Finding Entries 89

Image 93

Options 91

RingerType 93

Secret Entries 94

Speed Dial Numbers 92

Countdown Timer 104

Index 189

D

Data Roam Guard 80

Data Services

Applications 158

Browser Menu 168

Downloading Content 166

Enabling and Disabling 74

Launching 160

Net Guard 160

User Name 159

Delivery Receipt 55

Directory Assistance 5

Display Screen 12

Animation 49

Language 60

Display Settings 48–52

E

Email 164

Emergency Calls 28

End-of-Call Options 31

Enhanced 911 (E911) 29

Entering Text 36–40

Alphabet Mode 40

Font Size 52

Options 61

Selecting Mode 36

T9 Text Input 37

Erasing Phone Content 71

F

FCC Notice 183

H

Headset Mode 65

190 Index

I

In-Call Options 30

Instant Messaging 165

K

Key Functions 10

Key Press Echo 45

L

Language 60

Location Settings 53

Locking Your Phone 67

M

Making Calls 22

From Call History 84

From Contacts 35

In Lock Mode 69

Using Voice-Activated Dialing

107

With Pauses 33

Menu ii

Navigation 20

Style 50

Messaging

Preset Messages 55

Settings 54–56

Signature 56

Missed Call Notification 27

My Favorites 59

N

Net Guard 160

O

Open/Close Flip Option 62

Operator Services 5

P

Pauses 33

Personal Information

Management 105

Phone (Illus.) 9

Phone Features 14

Phone Number

Displaying 21

Finding 33

Saving 32

Picture Messaging

Locking the Pictures Menu 68

Password 116

Registering Your Account 116

Resetting Your Account 74

Sending From In Camera 125

Sending From Messaging 127

Pictures- See also Camera

Downloading 130

Managing Online 129

Storing 122–124

Taking 115

Uploading 129

Plus (+) Code Dialing 34

Power Save Mode 51

R

Resetting

Browser 72

Default Settings 73

My Favorites 72

Phone 73

Picture Messaging 74

Restricting Calls 69

Ringer Types 42

Roaming 75–80

Checking Voicemail 77

Icon 76

Setting Roam Mode 78

S

Screen Call 111–113

Screen Saver 50

Security 66–74

Menu 67

Side Key Guard 63

Silence All 47

Sleep Mode 51

SMS Text Messaging 151–153

Preset Messages 153

Sound Settings 42–47

Special Numbers 70

Speed Dialing 35

Assigning Numbers 92

Stopwatch 102

T

T9 Text Input 37

Adding a Word 38

Customizing 39

Text Greeting 48

Three-Way Calling 154

To Do List 100

Tone Length 44

Tone Type 45

TTY 58

Turning Your Phone On and Off 16

U

Unlocking Your Phone 3

Index 191

V

Voice Memos 109–110

Voice Prompt 44

Voice-Activated Dialing 107–108

Making a Call 107

Voice Dial Tags 108

Voicemail 143–150

Clearing the Icon 149

Expert Mode 146

Menu 150

Notification 144

Retrieving 145

Setting Up 4 143

While Roaming 77

Volume Settings 45

W

Warranty 186

Wireless Service

Directory Assistance 5

Operator Services 5

World Clock 104

Y

Yahoo! Mail 164

Yahoo! Messenger 165

192 Index

Notes

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

___________________________________________________

No results