Sears 934.5512559 Owner's Manual

OWNER'S

MANUAL

MODEL NO.

934.55125590

CONTENTS

IMPORTANT SAFEGUARDS ..................

PRECAUTIONS ............................

FEATURES ................................

SUPPLIED ACCESSORIES ...................

OPERATING CONTROLS AND FUNCTIONS .....

REMOTE CONTROL OPERATION .............

ANTENNA]CABLE SYSTEM CONNECTIONS ....

CONTROLLING VCR INPUT & OUTPUT .......

CHANNEL MEMORY PROGRAMMING .........

SETTING THE CLOCK ......................

TO CHANGE THE LANGUAGE ...............

VIEWING AND RECORDING THE SAME

PROGRAM ...............................

RECORDING ONE PROGRAM WHILE

VIEWING ANOTHER .......................

AUTOMATIC TIMER RECORDING ............

QUICK SET PROGRAM .....................

INDEX SEARCH ..........................

TIME SEARCH ............................

BLANK SEARCH ..........................

SETTING THE REMAINING TIME .............

JUST-IN TIME RECORDING .................

OTR (ONE ]:OUCH RECORDING) ............

MONITORING RECORDING .................

PLAYBACK ...............................

AUTO REPEAT PLAYBACK ..................

RENTAL PLAY ............................

COUNTER MEMORY .......................

SPECIAL FEATURES .......................

VIDEO CASSETTE TAPE ....................

TROUBLESHOOTING GUIDE ................

MAINTENANCE ...........................

SPECIFICATIONS .........................

18

30

31

32

33

28

29

29

30

24

25

26

27

19

19

22

34

35

36

37

10

13

14

6

8

5

6

16

17

2

4

VIDEO

CASSETTE

RECORDER

Record the Model Number and Serial Number of your VCR. The Model Number and the Serial number are on the rear panel.

Model No.

Serial No.

Keepthese numbers for future use.

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

] i

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRESENT

WITHIN THIS UNIT.

lSK OFE--

SERVICING TO QUALIFIED SERVICE PERSON-

NEL.

The important note is located on the rear of the cabinet.

THIS SYMBOL INDICATES THAT

THERE ARE IMPORTANT OPERATING

AND MAINTENANCE INSTRUCTIONS

IN THE LITERATURE ACCOMPANYING

THE APPLIANCE.

IMPORTANT SAFEGUARDS

1. Read instructions-All the safety and operating instruc- tions should be read before the appliance is operated.

2. Retain Instructions-The safety and operating instructions should be retained for future reference.

3. Heed Warnings-All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow Instructions-All operating and use instructions

shoul0 be followed.

5. Cleaning-Unplug this video product from the wall outlet before cleaning.

Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a

CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6. Attachments-Do not use attachments not recommended by the video product manufacturer as they may cause hazards.

7. Water and Moisture-Do not use this video product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8. Accessories-Do not place this video product on an unstable cart, stand, tripod, bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance.

Use only with a cart, stand, tripod, bracket, or table recommended by the manu- facturer, or sold with the video _RrAatEcARr product. Any mounting of the apIsy,r_ p,ov_o_ pliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.

An appliance and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the

S3125A

9.

appliance and cart combination to overturn.

Ventilation-Slots and openings in the cabinet are pro-

vided for ventilation and to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered. The

openings should never be blocked by placing the video

product on a bed, sofa, rug, or other similar surface. This

video product should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is

provided or the manufacturer's instructions have been

adhered to.

10. Power Sources-This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

11. Grounding or Polarization-This video product is equipped with a polarized alternating--currentline plug (a

plug having one blade wider than the other). This plug will

fit into thepower outlet only one way. This isa safety feature.

If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact

your electrician to replace your obsolete outlet. Do not defeat

the safety purpose of the polarized plug.

12. Power Cord Protection-Power supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience recep- tacles, and the point where they exit from the appliance.

13. Outdoor Antenna Grounding-If an outside antenna or

cable system is connected to the video product, be sure the

antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with regard to proper grounding of the

mast and supportingslruclure,

grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-dis-

-2-

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

GROUND

ANTENNA

LEAD IN

WIRE

DISCHARGE UNIT

(NEC SECTION 810-20

ELECTRIC

SERVICE

EQUIPM

NEC - NATIONALELECTRICALCODE

GROUNDING CONDUCTORS

(NEC SECTION 8t0-2t)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

$2898A charge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A)

14. Lightning-For added protection for this video product

during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the video product due to lightning and power-line surges.

15. Power Lines-An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

16. Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

I 7. Object and Liquid Entry-Never push objects of any kind into this video product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product.

18. Servlcing-Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19. Damage Requiring Service-Unplug this video product from the wall outlet and refer serv icing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the video product.

c. If the video product has been exposed to rain or water.

d° If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation.

e. If the video product has been dropped or damaged in any way.

f.

When the video product exhibits a distinct change in performance-this indicates a need for service.

20. Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

21. Safety Check-Upon completion of any service or repairs to this video product, ask the service technician to perform safety checks to determine that the video product is in proper operating condition.

22. Heat-This video product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

- 3 EN

-/t, _t, 5C15

PRECAUTIONS

I[oIe_YU(O_

For safe operation and satisfactory performance of your

VCR, keep the following in mind when selecting a place for its installation:

• Shield it from direct sunlight and keep it away from sources of intense heat.

• Avoid dusty or humid places.

• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the VCR. Do not place the unit on a carpet because this will block the ventilation holes.

• Install unit in a horizontal position.

• Avoid locations subject to strong vibration.

• Do not place the VCR near strong magnetic fields.

• Do not move the unit from a cold to a hot place or vice versa.

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug.

If, by accident, water is spilled on your VCR, unplug the power cord immediately and take the unit to a

Sears Authorized Service Center for servicing.

Do not put your fingers or objects into the VCR cassette holder.

Do not place anything directly on top of the VCR.

Moisture condensation may occur insidc the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use the VCR until its inside is dry.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

IMPORTANT COPYRIGHT INFORMATION

Unauthorized recording or use of broadcast television programming, video tape, film or other copyrighted material may violate applicable copyright laws. We assume no responsibility for the unauthorized duplication, use or other acts which infringe upon the rights of copyright owners.

The serial number of this product may be found on the back of the VCR. No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.

Date of Purchase

Dealer Purchased from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

- 4 -

*****

EN

5CI6

FEATURES

• Rotary 4-head Record/Playback System-

Rotary 4-heads to ensure excellent picture quality and special effects playback.

• Auto Power On and Off System-

Automatically turns the VCR on as you insert the cassette, turns off after auto-rewind, and ejects when the beginning of the tape is reached.

• Automatic Rewind-Automatically rewinds at the end of the tape, except during timer recording.

• Auto Repeat-Lets you set the VCR to automatically repeat a tape when it reaches the end.

• Digital Auto Tracking (DTR)- Adjusts thetracking automatically for each tapeyou play.

• Three Different Record/Playback Speeds-

Select the Standard Play (SP mode), Long Play (LP mode) or Super Long Play (SLP mode) for up to eight hours of recording/playback with a T- 160 tape.

• Automatic Playback Speed Selection-

Automatically selects the proper playback speed.

• 1 Year, 8 events (including Quick Set Pro- gram, Daily and Weekly Timer Recording)-

The built-in timer allows you to record up to 7 programs at different times on different channels up to

! year in advance. The Quick Set Program feature uses program number 8. The daily timer allows recordings to be made of daily broadcasts, and the weekly timer allows recording to be made once a week up to the end of the tape.

• Quick Set

Program-

Allows you to easily record one program within the next 24 hours.

• OTR (One Touch Recording)-Instant timed recording from 30 to 480 minutes is possible at the push of OTR button.

• Rental Play Mode-Improves playback picture quality of worn tapes, especially rental tapes.

• 2 Step Picture Search Operation- You can view a video program at a high speed or super high speed in either a forward or reverse direction in LP and SLP mode.

• STILL- "Freeze" the picture at any time, for close viewing of a particular scene.

• 181 Channel Capability PLL Frequency Syn- thesizer Tuner with Direct Channel Entry-

(A converter may be necessary to view scrambled cable channels.)

• Infrared Remote Control-Allows you to use

mostof the controls from a remote location.

• Real Time Tape Counter-This shows the elapsed recording or playback time in hours, minutes, and seconds. The "-" indication will appear when the tape is rewound further than the tape counter position "0:00:00".

• Direct Button Operation-When a tape is in the

VCR and the power is off, just pressing PLAY,

REW or F.FWD button on the main unit will automatically turn on the VCR and playback, rewinding or fast-forwarding will start immediately.

• On-Screen-Programming-All operating and programming functions appear on your TV screen.

• Bilingual on screen menu display selectable in English or Spanish

• Time SearchLets you set the VCR to advance the tape by entering the desired playback time you want to skip.

• Blank Search- Lets you set the VCR to search for an unrecorded portion on the tape.

• Index Search- Lets you Index the start of a recording.

• Edit Search- Lets you set the VCR to edit an unwanted segment of a recording.

• Just-In-Time RecordingMeasures the remaining tape and automatically adjusts the tape speed so that the automatic timer recording fits on a cassette.

Tape RemainderYou can check the remaining running time of your tape.

Slow MotionYou can view the video program at a slower than normal playback speed. Slow speed can be controlled by pressing F.FWD button (faster) or REWIND button (slower).

-5-

_

EN

_-lk 5CI6

SUPPLIED ACCESSORIES

Remote 2ontrolUnit Batteries Coaxial Cable

AAx 2

NOTES:

II

PART NO.

(UREMT30SR003)

• If you need to replace these accessories, please refer to the PART NO. under the illustrations and contact the parts department for ordering.

• Depending on your antenna system, you may need different types of Combiners (Mixer) or Separators (Splitter).

Contact your local electronics store for these items.

OPERATING CONTROLS AND FUNCTIONS

--FRONT VIEW--

5

|l

20

19 18 17 16 15 14 13 12 11 10 9 8 7

--REAR VIEW AND TERMINALS---

6

21 22 23

I

IIIIIIIIIIIIIII

-6-

OUT

AIDIO

IN

0"

OUT

]

1 I 1

27 26 25 24

*****

EN

5CI6

1 Cassette Compartment

2 STOP/EJECT button-Press to stop the tape mo-

tion. Pressagainto removethe tapefrom VCR.

3 PLAY button-Press to begin playbackof a tape.

4 REW(ind) button-Press to rewind the tape,or to

view video in reversedirection at a faster than nor-

mal speed.PressPLAY button toreturn VCR to nor- mal playback speed.

5 F.FWD button-Press to advance the tape, or to view video in forward direction at a faster than normal speed. Press PLAY button to return VCR to normal playback speed.

6 PAUSE/STILL buttonPress to temporarily stop

the tapeduring recordingor to view a still picture during playback.

7 END button-Press to select desired end time in the Quick Set Program mode.

8 START button-Press to select desired start time in the Quick Set Program mode.

9 QUICK SET PROGRAM button-Press

the Quick Set Program. to set

10 OTR button-Press to activateone touch record- ing mode.

11 REC(ord) button-Press to begin manual record- ing.

12 CH(annel) buttons- Press to select the channel for viewing or recording.

TRACKING function-Press • or • tominimize

video 'noise' (linesor dots on the TV screen)during tape playback.

13 SPEED button- Press to set desired tape speed.

14 Digital Display- Displays the clock, timer recording, counter, channel etc.

15 Remote Sensor window-Receives the infrared control signals from the handheld remote control unit.

16 TV/VCR button-Press to select the signal source that your TV will receive.

VCR position: to view playback, to monitor video recordings or watch TV using the VCR tuner.

TV position: to watch TV or to view one program while recording another.

17 POWER button-Press to turn VCR on and off.

Press to activate the automatic timer recording.

18 AUDIO IN jack-For connection to audio output jack of your audio equipment or another VCR. (Use these jack when selecting the '1.,2"position, see page

13 "INPUT SELECT".)

19 VIDEO IN jack-For connection to video output jack of your video camera or another VCR. (Use this jack when selecting the "L2" position, see page 13

"INPUT SELECT".)

20 Power cord-Connect

(120V/60H z).

to a standard AC outlet

21 AUDIO OUT jack-For connection to the audio in jack of your audio equipment or anotherVCR.

22 AUDIO IN jack-For connection to the audio out- put jack of your audio equipment or another VCR.

(Use these jack when selecting the "L 1"position, see page 13 "INPUT SELECT".)

23 ANT. IN terminal-For connection to an antenna or CATV.

24 ANT. OUT terminal-For connection to an antenna in terminal of your TV.

25 CH3/CH4 selector switch-Use to select the video output channel (3 or 4) for playback from the

VCR.

26 VIDEO IN jack-For connection to the video output jack of your video camera or another VCR.(Use this jack when selecting the '%1" position, see page

13 "INPUT SELECT".)

27 VIDEO OUT jack-For connection to the video in jack of video processoror anotherVCR.

- 7 EN

"k "A""lk_" * 5('16

REMOTE CONTROL OPERATION

You can operate most of your VCR's functions from the Remote Control (included). The buttons on the Remote

Control have the same functions as the corresponding buttons on the VCR.

! !

[0,%,m mu:i a a

[o]u u

1 POWER/TIMER REC button-Press to turn

VCR on and off. Press to activate the automatic timer recording.

2 NUMBER buttons-Press to select desired channels and to enter digits for setting program. They cannot be used to set desired channel during Timer

Recording. To select channels from 1 to 9, first press

"0"button then 1 to 9.

+100 buttonPress to select cable channels which are equal or greater than number 100.

3 BLANK SEARCH button -Press to use Blank

Search mode.

4 SLOW button -Press in playback for slow motion, Slow speed can be controlled by pressing

F.FWD button (faster) or REWIND button (slower).

5 MENU button-Press to display main menu on the

TV screen.

6 SELECT buttonPress to select setting modes

(TIMER PROGRAMMING, CHANNEL SET UP,

SETTING CLOCK, REPEAT PLAY, RENTAL,

REMAIN, etc) from menu.

7 REWIND button-Press to rewind the tape or to

view the picture rapidly in reverse during playback.

(Rewind Search)

SLOW [-] Function-Press slow motion. (slower) to control speed in

8 RECORD button-Press to begin manual recording.

9 STOP button-Press

to

stop the tape motion.

10 PAUSE/STILL button-Press to temporarily stop the tape during recording or to view a still picture during playback.

F.ADV

Function-Press to advance one frame during pause/still mode.

To release, press

PAUSE/STILL button again.

m

11 PLAY button- Press to playback the tape.

12 F.FWD button-Press to rapidly advance the tape or to view the picture rapidly in forward during playback. (Forward Search)

SLOW [+] Function

-Press to control speed in slow motion. (faster)

13 TAPE COUNTER MEMORY button-Press to set counter memoryon and off.

14 ADD/DELETE button-Press to add or delete

channelnumbers.Pressto cancel a timer program.

TAPE COUNTER RESET button-Press to resetcounterto 0:00:00.

15 INDEX SEARCH-Press to use Index Search mode.

16 TIME SEARCH button-Press

Search mode.

to use Time

17 CHANNEL buttons-Press to select desired channel by using either • or • button. They cannot be used during Timer Recording.

18 EJECT button-Press to remove the tape from

VCR.

19 TV/VCR button-Press mode.

to select TV or VCR

VCR position: to view playback, to monitor video recordings or watch TV using the VCR tuner.

TV position: to watch TV or to view one program while recording another.

-8-

EN

• I_k'JlIt*;1IIIIIII_[ltll Hi I De;y;11Ii il DIq I P[,,,1

Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow.

9

8

r-rl

Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings.

@HN_NEL

MENU SELECT

RE.NO

PLAY F.FWD

PAUSEJ_TILL

5

6

4

3

0

1

Fyq

Replace the cover.

- 9 -

****'_

EN

5CI6

ANTENNMCABLE SYSTEM CONNECTIONS

For some of the most common types of connections, see the following drawings. Use only one connection.

For any further complex connections, please contact your local dealer or other qualified persons. (You may need additional accessories which are not supplied).

L'i{i_t Ik_l _][I_LII | I I ,_-_ii_l_,l_,r;!

(l)Disconnect the round 75-ohm combination

VHF/UHF coaxial antenna cable from the back of your TV set.

(2)Reconnect the coaxial cable to ANT. IN terminal of the VCR.

(3)Connect oi_c end of the COAXIAL CABLE (,supplied) to the ANT. OUT jack of the VCR.

(4)Connect the other end of the COAXIAL CABLE

(supplied) to the antenna/cable jack of your TV.

VHF/UHF

Combination Antenna

[Back of the "IV] :.,,,._:r u

I 1

()_;) .....

,,,'_: ""--'_xial cable

(nol supplied) t_

_. (2)

(,)'

'"

L =xj

(supplied)

I. • - €1

131

[1_¥ IkvJ[KOT_Ik'q 1

(l)Disconnect the CATV coaxial cable from the back of your TV set.

(2)Reconnect the CATV coaxial cable to ANT. IN terminal of the VCR.

(,3)Connect one end of the COAXIAL CABLE (supplied) to the ANT. OUT jack of the VCR.



I FromCableCompany

:,°,"_"

I

[Back of the TV_J

I......

(, ) It' _,_; i::C_al cable

(notsupplied) t_

_ (2)

(,)'

I" - "

i

!

131

(supplied)

Note to CATV system installer

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical.

-10-

EN

"***** 5C16

(l)Disconncct the VHF coaxial amcnna cable and the

UHF flat twin-lead antenna cable from the back of your "IV set.

(2)Reconnect those cables to a UHF/VHF combiner

(not supplied).

(3)Connect end of the UHF/VHF combiner to the ANT.

IN terminal of the VCR.

(4)Connect onc end of the COAXIAL CABLE (supplied) to the ANT. OUT terminal of the VCR.

(5)Connect the other end of the COAXIAL CABLE

(supplied) to a UHF/VHF separator (not supplied).

(6)Connect the separator's coaxial end to the TV's

VHF jack, and fiat twin-lead end to the TV's UHF terminal.

[Back of the TV]

©

UHF (300ohm)

VHF (75ohm} O

(6) UHF/VHF separator

(not supplied)

_O]RLglP#___

(l)Disconncct tile indoor VHF/UHF antenna cable from the back of your TV set.

(2)Reconnect the cable to the ANT. IN terminal of the

VCR.

(3)Connect one end ot the COAXIAL CABLE (supplied) to the ANT. OUT terminal of the VCR.



[Back of the TV]

_, /INDOOR VH F/UHFAntenna

Rabbit Type (not supplied)

:i_"_

NOTE: The connection of an indoor antenna to a VCR may not always give acceptable TV Reception.

-11-

EN

"***** 5CI6

[Back of the unit} If your TV has A/V input jacks, you may connect your

VCR's AUDIO/VIDEO OUTPUT jacks to the audio/video input jacks on back of your TV.

Direct audio/video connections usually result in a better picture and sound quality for tape playback. Please see your TV's owner's manual for details.

Then, set your TV to the Video mode using TV/VCR button on your "IV.

_lr oAUDIO0

l- ov,0 oe

ideo "Y_'_

++

,.v.+,,,00,

, II°o

9oo,9

TO COPY A VIDEO TAPE

Connect the editing (recording) VCR, the source (playing) VCR and your TV using the following diagram.

NOTE: You can use the audio and video input jacks on the front panel at editing(recording) VCR instead of using acks on the back.

Main Unit

[Editing(Recording)VCR] +o

,0 Antenna input jack

U_s set]

e for monitoring)

* Coaxial cable (supplied)

[Source (Playing) VCR] r_ _ adapter cord

(not supplied)

_ oEo?_o_O

31

1. Insert a pre-recorded video cassette into the source(playing) VCR.

2. Insert a blank video cassette, or one you want to record over, into the editing(recording) VCR cassette compartment.

3. Press SPEED button on the editing(recording) VCR to select the desired recording speed (SLP, LP or

SP).

4. Select L I or L2 position on the editing(recording)

VCR. See page 13, under "Input Select".

5. Press REC button on the editing(recording) VCR.

6. Begin playback of the tape in the source(playing)

VCR.

NOTE: For best results during dubbing, use the VCR's front panel controls whenever possible.

The remote control might affect the playback VCR's operation.

• Always use video-quality shielded cables with

RCA-type connectors. Standard audio cables are not recommended.

• You can use a video disc player, satellite receiver, or other audio/video component with A/V outputs in place of the source(playing) VCR.

TO MONITOR THE RECORDING

!. Turn on the TV and set it to the same output channel as the editing(recording) VCR channel 3 or 4.

2. Press TV/VCR button on the editing(recording)

VCR so that "VCR" appears on the display.

-12-

_*,_-k

EN

_r 5C16

If your cable service supplies you with a cable converter box, you can use the basic connection shown below.

TO RECORD AND VIEW A SCRAMBLED/UNSCRAMBLED CHANNEL.

I. Press TV/VCR button so that "VCR" appears on the display.

2. Set the TV channel to the same video output channel as the switch located on the back of the VCR (CH3 or 4).

CableTV To VCR's ANT,IN Terminal

I

3. Set the VCR channel selector to the output channel of the Cable Converter box. (EXAMPLE CH3)

4. Select the channel to be recorded at the Cable Converter Box.

:::i-i'.illl

NOTES:

• With this connection, you CANNOT record one program while viewing another.

/

CATV(Cable)

Input

/ _

To VCR's ANT.OUTTerminal

Jack

• Channel memory programming is NOT needed when

using this connection.

CONTROLLING VCR INPUT & OUTPUT

When the VCR is in the Playback mtxie, or when the TV/VCR button is in the VCR position, your TV will receive the signals from the VCR on either channel 3 or 4. Set the 3CH/4CH selector switch to the station that is not used fornormal broadcasts in your area; then set your

TV to that same channel when viewing from the VCR.

The video output channel of this unit is set to channel 3 prior to shipment from the factory.

CH3 CH4

To use the external input jacks, select the "LI" or "L2" position.

• If you use the audio and video input jacks on the back of the unit, press 0, 0, I with number buttons to select the "LI" position.

• If you use the audio and video input jacks on the front of the unit, press 0, 0, 2 with number buttons to select the '%2" position.

You can select "LI", '%2" as a channel by using the CHANNEL "A" or "V" button.

Note: "I.,1" and "I.,2" are found before the lowest memorized channel. (Example: CH2)

[vdI I) _Ol_V_[0] |] N _ N mKN H[0]_1 [0]_1M Ik"i

TV power must be on. Please see your TV's owner's manual/or details.

Connection Using AV Cord

(Refer to page 12.)

Connection Without AV Cord

(Refer to page 10, I i, 13.)

To Set your

TV to the Video Mode

Set your TV to the Video mode using TV/VCR button of your 'IV.

To set your TV to the TV mode, press TV/VCR button of your TV again.

Set the TV channel to the same video output channel located on the back of the VCR.

(CH 3 or 4) Then, set your VCR to the VCR mode using TV/VCR button of your VCR.

- 13-

*****

EN

5C16

CHANNEL MEMORY PROGRAMMING

(Without a Cable Box)

Channel memory programming is NOT needed when connected to a CABLE BOX. You can program the tuner to scan only the channels you receive in your area.

• You must use remote control for this procedure.

NOTES:

• Follow the steps below, once. Repeat it only if there is a power failure or the VCR is unplugged for more than 3 seconds. In these cases, since the programmed channels are erased, the VCR will prompt you with

"--:--" when you turn it on.

• You must follow the steps below before attempting to play or record a video tape. If you want to play or

record a video tape BEFORE programming the tuner, you must first press POWER button to turn off the

VCR. Then, press POWER button again to turn itback on. To program the tuner again, see "To preset channel memory again" on this page.

After scanning, the tuner stops on the lowest memorized channel.

Plug the VCR power cord into a standard AC outlet.

The "- - : - -" flashes.

The VCR distinguishes between standard TV channels and Cable channels.

If you subscribe to cable TV,

"CATV" appears on the display. (TV mode: from CH2/

CATV mode: from CH 1) t i "

CH 02

8 P

II

• c.

VCR

2

I

I

I

Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR.

(CH 3 or 4) crl

Press the POWER button to turn on the VCR so that the

?

"n" appears on the display.

The TV screen retums to TV mode.

• If you want to recall the selected channels, you can select the desired channel directly by number buttons on the remote control.

• The TV screen returns to TV mode when you press

MENU button in Tuner Set Up mode.

Press the TV/VCR button so that "VCR" appears on the display. 'q__,ANGUAGESELECT" appears on the TV screen.

vrl

Select I(ENGLISH) or

2(ESPAIQOL -- SPANISH) with number buttons.

LA'_U,GESELEC'

2

,E_,SH tO_]

ESPA_OL

Press SELECT or MENU button on the remote control

SOthat "TUNER SET UP" appears on the TV screen.

tUNERSETUP

Press SELECT button once. The tuner scans and memorizes all the active channels in your area.

To preset channel memory again

I

2

3

4

Turn on the VCR.

Turn on the TV and set the TV channel to the same video output channel located on the back of the

VCR. (CH 3 or 4)

Press the TV/VCR button so that "VCR" appears on the display.

Press MENU button. Select item 3(INITIALIZE) with number buttons.

5 Select item I(CHAN-

NEL SET UP) with number buttons.

And select

I(TV) or 2(CATV) with number buttons.

l i tONI oKrv

ADD/DELETE 08

CHANNEL SETUP

6 Press SELECT button once. After scanning, the tuner stops on the lowest memorized channel.

- 14-

*****

EN

5B24

Use this proccdurc to delete from memory the chalmcls yt)tl .t) longcr lccclvc or seldom watch and to manually add to memory previously deleted channels.

• Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR.

(CH 3 or 4)

• Press the TV/VCR button so that "VCR" appears on the display.

DELETING PRESET CHANNELS ADDING PRESET CHANNELS

Press MENU button on the remote control. Select item

3(INITIALIZE) with number buttons.

I i

TIMER

VCR

PROGRAMMING

SET UP

_ITIAL_E

MENU

Press MENU button on the

remote control. Select item

3(INITIALIZE) with number buttons.

I i

TIMER

VGR

PROGRAMMING

SET UP

IMTIALtZE

MENU

INITIALIZE

SETTING CLOCK

S LANGUAGESELECT iNITIALIZE

LANGUAGESELECT

Select item I(CHANNEL

SET UP) with number buttons.

Select item I(CHANNEL

SET UP) with number buttons.

I

3 w ION|

AD_DELETE CH

CHANNEL SET UP Select item 3(ADD/DE-

LETE CH) with number buttons.

,.,,,;:_,iidi_=t c.

Enter the desired channel using the number buttons. The channel flashes.

,_' ili%

You must precede single-digit channel numbers with a zero (02, 03, 04 and so on).

%.

,_ :lJ'

Press ADD/DELETE button so that "DELETE" flashes on the display. The channel is deleted from the VCR.

• For next channel you wish to delete, select that channel and follow step [5].

• If you press ADD/DELETE button again, the channel is memorized again.

Select item 3(ADD/DE-

LETE CH) with number buttons.

r=rl

Enter the desired channel using the number buttons. The channel flashes.

You must precede singledigit channel numbers with

3

CHANNEL

AD_D_LETE

,.m' 03 :llN) n0'II %

SET U P

, _,_ Io_l

CH a zero (02, 03, 04 and so on).

Press ADD/DELETE button so that "ADD" flashes on the

=,,,,,,;'O_=tT_I

,o,= display. The channel is added to the VCR.

• For next channel you wish to add, select that channel and follow step [5].

• If you press ADD/DELETE button again, the channel is deleted again.

Press MENU button. The TV screen returns to TV mode.

• To check the channel(s) that has been deleted, press

CHANNEL A or 'v button.


• To check the channel(s) that has been added, press

CHANNEL _ or _ button.

-15EN

•It _ _ _'Ir 5B24

iE'I"IING THE CLOCK

Set the clock accurately for proper automatic timer recording. We suggest that you use a TV or radio station as your time source.

• VCR Power must be on.

• Turn on the "IV and set the TV channel to the same video output channel located on the back of the VCR.

(CH 3 or 4)

• Press the TV/VCR button so that "VCR" appears on the display.

• You must use remote control for this procedure.

In the example below, the clock is to be set to:

DATE

SETrlNG TIME

Wednesday I st March, 1995

5:40PM crq

Press MENU button on the remote control.

The main menu appears on the TV screen.

Select item 3(INITIALIZE) with number buttons.

Select item 2(SETTING

CLOCK) with number buttons. The MONTH digits flash.

Frl

Enter your desired MONTH with number buttons.

I i

TIMER PROGRAMMING

VCR SETup

INrTIALtZE

MENU

INITIALIZE s LANGUAGESELECT

I SETTING CLOCK

M(_N TH DAY YEAR

SETTING (_.OCK

MONTH DkY YEAR

Enter your desired HOUR with number buttons.

rx?

Enter your desired MINUTE with number buttons.

vrq

Select AM(I) or PM(2) with number buttons.

I

MONTH DAy

0a I 01 WED

YEAR

199E

0 _flt*tfi -.

tiiiiiii dl#' _ %,.

-.

]

J

I

MONTH DAY YEAR

03 I O_ WEO 1995

E'i'i'ING o 5 : o

_

CLOCK

_** -'- - ' i_l

MONTH 0AY YEAR

03

HOUR

/ 0!

SETTING

MINUTE os : 40

WED

CLOCK

1995

1

PM

%,A_i ad'

.,,,.,'F_d ,,::,,,,,I

Press ADD/DELETE button to go back one step from current step during steps [4] to [9].

Enter your desired DAY with

number buttons.

I SETTING CLOCK

HOORMINUTE *llN_/l_

]

J

Enter your desired YEAR with number buttons.

The day of the week will change automatically.

I

MONTH

03

DAY

1 01 WED

YEAR

1995

H

CLOCK

AMSPM

Press MENU or SELECT button to start the clock.

Although seconds are not displayed, they begin counting at 00 when you press them. Use this feature to synchronize the clock as accurately as possible.

This unit has a built in calendar up to the year 2009.

• When unplugging the AC-cord or if there is a power failure for more than 3 seconds, "- - : - -" flashes on the display.

• If the display shows an abnormal reading or no reading, unplug the power cord for more than 3 seconds. Then plug it back in.

- 16 -

*****

EN

5B24

TO CHANGE CLOCK SETTING

If you want to change the clock,

1 Turn on the VCR.

2 Turn on the TV and set the TV channel to the same video output channel located on the back of the

VCR. (CH 3 or 4)

3 Press the TV/VCR button so that "VCR" appears on the display.

4 Press MENU button. Select item 3(INITIALIZE) with number buttons.

5 Select item 2(SE'I'I'ING CLOCK) with number buttons.

6 Select desired digit with SELECT button.

7 Enter correct numbers with number buttons.

8 Press MENU button to return to original mode.

To check the Remain, Count, Clock and Channel number on the TV screen or display, press SELECT button.

Each time you press SELECT button, TV screen or display will change as follows:

<OFF mode>

I ....

O:1?:3q 2

<REMAIN mode>

'_F' Press once

D: 3q ?

<COUNT mode> _ir Press once

<CLOCK mode> qlF Press once

TO CHANGE THE LANGUAGE

• VCR Power must be on.


(CH 3 or 4)



Press MENU button on the remote control.

The main menu appears on the TV screen.

TIMER PROGRAMMING

Select item 3(LANGUAGE

SELECT) with number buttons.

LANGUAGESELECT

[ONI

Select item 3(INITIALIZE) with number buttons.

s LANGUAGE SELECT

_NIT IAL _"E 1

Select I(ENGLISH) or

2(ESPAlqOL - SPANISH) with number buttons.

LANGUAGESELECT

t ENGLISH

2 ESPA_

IONI

- 17 -


*****

EN

5B24

VIEWING AND RECORDING THE SAME

PROGRAM


• Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR.

(CH 3 or 4)


E:3

Insert a cassette tape with the erase-protection tab, if necessary, rewind or fast forward the tape to the point at which you want to begin recording.

Counter mode appears at counter 0:00:00 on the diso:oo:oo play.

TO DELETE SCENES DURING

RECORDING

While VCR remains in record mode, press PAUSE button.

I _-_:_'"

Note: If you do not press PAUSE button again within five minutes, VCR will automatically return to Stop mode. You may review the time remaining with ,,1,, marks on the display. Each 'lr'mark shows one minute.

Select the channel to be recorded by pressing the number buttons on the remote control or the CHANNEL • or • button.

CH 32]

Press PAUSE or REC button to resume recording.

r sp

|_Ec L

Press SPEED button on the

VCR to select the desired tape speed (SP-LP-SLP).

I SP

EDIT SEARCH

To edit an unwanted segment from the already recorded portion of tape while VCR remains in record mode.

While VCR remains in record mode, press PAUSE button.

Press REC button.

The red "O" indicator lights on the display.

I REC sp

Press STOP button when recording is completed.

I STOP

Press and hold REWIND button until you have reached the beginning of the unwanted segment. (If you rewind past the beginning of the unwanted segment, press and hold F.FWD button until you have reached it.)

Note: If you do not press PAUSE button again within five minutes, VCR will automatically return to Stop mode.

D[3

Press PAUSE or REC button to resume recording.

-18-

*****

EN

5CI6

RECORDING ONE PROGRAM WHILE

VIEWING ANOTHER

You can record one program while viewing another. To start recording, follow steps [ 1] to [4] under "VIEWING

AND RECORDING THE SAME PROGRAM" on page 18.

TO MONITOR THE PROGRESS OF

YOUR RECORDING,

If you set the TV channel to

1

3 or 4 channel, press

TV/VCR button so that o 17:l]]: 1"7 o:°"]

"VCR" disappears from the display.

If you set the TV channel to

3 or 4 channel, press

TV/VCR button so that "VCR" appears on the display.

• If you connect VCR to TV using AV cord, set your TV to the TV mode using TV/VCR button of your TV.

Turn on the TV and set the TV channel to the same

Set the TV to the channel you want to watch (leave the

VCR tuned to the channel you want to record).

video output channel located on the back of the VCR.

(CH 3 or 4)

• If you connect VCR to TV using AV cord, set your

TV to the VCR mode using TV/VCR button of your

TV.

AUTOMATIC TIMER RECORDING

You may set the VCR to start and end a recording while you are away. You can set seven events to record on specific days, daily or weekly within a ! year period.



(CH 3 or 4)


• Clock must be set to the correct time and date before setting the timer.


In the example below, the timer is being set to record:

DATE

SETTING TIME

Saturday 6th May, 1995 from 7:30AM to 8:50AM

CHANNEL

TAPE SPEED

CH61

LP

Insert a cassette tape with the erase-protection tab, if necessary, rewind or fast forward the tape to the point at which you want to begin recording.

Press MENU button on the menu appears on the TV remote control.

The main

[ _.o

3 ,N,TLtL tZE

Select your desired program number with number buttons.

START

END

TiME

TIME

-2" _i ":

- : ....

-: ....

The program number 8 is used for setting Quick Set

Program only. You cannot select number 8 in the procedure of Automatic Timer Recording.

Press SELECT button on the remote control.

[ iiii_iii!!lllii!

DALLY ii][ii]i]][[[ii

....

3 .:WEEKLy.

....

PROGFI_M

J ilii%'

]

Select item i(TIMER PRO-

GRAMMING) with number buttons.

TAPE

DATE

SPEEO

CHANNEL

-19EN

"k**,k _" 5CI6

Select item I(ONCE) with number buttons.

The

CHANNEL digits flash.

I

In_OGnAM HUMBleR 1

CHANNEL :,,,_,,,--=I,,,,

START TIME _'-e/-_ -

TAPE SPEED

TIME

--

:

_]

Enter your desired DAY with number buttons.

The day of the week will change automatically.

ONE TIME PROGRAM

PROGRAM NUMBER

_NNEL

$TARTT_

END T_E

TAPESPEED

DATE

I

E,

07:30

08: O

AM

AM

Lt_ $ ./"

_S_'0 B ,.B_T

•_ _ "%

J

I

Enter your desired CHAN-

NEL with number buttons.

PROGRAM _MBER I

START T_*.,.

- - I._

END TIME._" ._"-

TAPESPEED '_

ON_ _IME PROGRAM

-

: t

Press MENU button.

Program 1 is now completed.

Enter your desired HOUR with number buttons.

ONE TIME_M

I_GBAM MdM$8R ,

TAPE

OAT E

SPEED -

- - / -

:--

-

/ J

To set another program, repeat steps [2] to [15] starting on page 19.

Enter your desired MINUTE with number buttons.

OWE TIME PROGRAM

Iq_a:)_qAM N_JMBER ,

CI4ANNEL Bl %11 l

I'

TAPE SPEED

DATE _.

-i

" hi"

,_

..

Press POWER/TIMER REC button. The "F-d" indicator

I_t I appears on the display. The number of all programmed events are displayed with current time.

5:51 ,,,

y0q

Select AM(I) or PM(2) with number buttons.

I

PROGRAM NL.i_E_ER

DHAiMNEL

BTARTTIME

END TME=,_

S I h:: 6_#_30

-_=_

TIME

/ - -

I

A

--

M"I

NOTES:

• When the programs overlap, the earliest program has priority.

• When the earliest program has finished and the pro-

grams which should start still overlap, the recording

will start in order of the program number.

I , ::::::_:.%..;::i:::_,

PROGRAM NUMBER

I TIME

8TARTTIME Q,7:80

END TIME _:, _EI_B0

AM

A

Repeat steps [8]-[101 to set the end time.

= desired recording speed SP(I), LP(9_),

SLP(3) or AUTO(4) with number buttons.

[._}

• AUTO(4) is available only with Program No. 1.

See "Just-InTime Recording" on page 28 for the use of AUTO(4) setting.

rim

Enter your desired MONTH with number buttons.

•

I":D:sL£i

DATE _SJO 3':,WED I

'I_' I "% J

'

I

,

I):OOAM

I : i

10:00AM

1%11i1

I

'.

PROGRAM3

11 :OOAM

•

1 _:00PM

If you programmed as per the above illustration the timer recording would be carried out as follows:

9:00AM - 1! :00AM for PROGRAM 2

11:00AM - ! 2:00PM for PROGRAM 1

12:00PM - for PROGRAM 3

I

'

I ,

I i

I

,

I

,

If you programmed as per the above illustration the timer recording would be carried out as follows:

9:00AM - 11:00AM for PROGRAM 2

11:00AM - for PROGRAM !

- 20 -

EN

DAILY PROGRAM

(MONDAY-SUNDAY)

To record a program at the same time on the same channel every day, follow steps [1] to [5] on page 19, then step [6a] below.

Select item 2(DAILY) with number buttons.

1_O3RAM MJtaBER I

IENOTIME _ _1_:._

I_ILY PROGAAIO

OATE --I--

-

_]

Continue with step [7] on page 20 onwards.

CHECKING TIMER PROGRAMS

To check a program that is to be recorded using the

Automatic Timer Program when the VCR is in the timer-record mode:

1) Turn on the TV and set the TV channel to the same video output channel located on the back of the

VCR. (CH 3 or 4)

2) Press POWER/TIMER REC button so that the

"@" indicator disappears from the display.

3) Press the TV/VCR button so that "VCR" appears on the display.

4) Follow instructions in steps [2] to [5] on page 19.

Information which was set for programming will now appear.

WEEKLY PROGRAM

To record a program at the same time on the same channel every week, follow steps [I] to [5] on page 19, then step [6b] below.

Select item 3(WEEKLY) with number buttons.

TAPE SPEED --

_TE .....

Continue with step [7] on page 20 onwards.

TO STOP RECORDING

Press STOP button on the VCR.

• If you are recording using the Automatic Timer Program, you may not operate the unit manually, but, you may still stop the recording by pressing

STOP/EJECT button on the VCR.

NOTE: STOP button on the remote control will not function in the Automatic Timer Recording mode.

TO CORRECT OR CANCEL

A PROGRAM

• Press ADD/DELETE button to go back one step from current step during steps [5]~[14].

• If you finished setting program, repeat steps [2] to

[4] on page 19. Then press SELECT button repeatedly until your desired digit flashes and reset program.

• You may cancel the entire program by pressing

ADD/DELETE button at step [5].

AUTOMATIC TIMER RECORDING

HINTS

• If there a power failure or the VCR is unplugged for more than 3 seconds, the clock setting and all timer settings are lost.

• If the tape runs out before the end time, the VCR will switch to the Stop mode immediately, eject the tape and the VCR power will be turned off. The "[]" indicator will flash.

• If a tape is not inserted or the erase-protection tab is removed, the "@" indicator flashes and automatic timer recording cannot occur. Insert a tape that allows recording.

• The TV that is connected to your VCR may be turned

ON or OFF when the VCR is in the timer-record mode.

- 21 -

***'if*

EN

5CI6

QUICK SET PROGRAM

You may set the VCR to start and end recording one program within 24 hours by simply pressing QUICK SET

PROGRAM button on the VCR.

It is easy for you to set the timer for recording today's TV program.

* VCR power must be on to set Quick Set Program.

• Clock must be set to the correct time before setting the timer.

• Quick Set Program controls program number 8.

In the example below, the Quick Set Program is being set to record (current time is 6:00PM):

SETTING TIME

CHANNEL

TAPE SPEED from 9:30PM

CH61

LP

to 11:00PM

NOTE: This function cannot be done by the remote control.

Insert a cassette tape with its safety tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) display will change to the count mode.

L_"

0:130:00

_"

33

I

Press QUICK SET PRO-

GRAM button on the VCR.

I.l_

. w_o,' 37 pears on the display.

_ ,

I

Set the desired start time.

edly or hold it down until

Press START button repeat[ i ,_

- "_°'' ,_ your desired start time is disL _8 (- . _:3D _€- 33

J played.

Set the channel number.

Press CHANNEL • or • button repeatedly or hold it down until your desired channel number is displayed.

7rq

Set the tape speed.

p_ m

E_o

WEO s

1l:13O

C1_ ___

_- G your desired tape speed is l

Press SPEED button until _° " t°" '

(AUTO-no display, SP, LP or SLP)

• The tape speed can be changed at any step from [2]

to 15].

GRAM button to return to J'_ original mode.

O:OD:DtJ CN

Set the desired end time.

Press END button repeatedly or hold it down until your desired end time is displayed.

I 1:013,,r 37

Press POWER/TIMER REC button to set Quick Set

Program.

This turns the VCR power off, and the "1_" indicator | ,_ lights up on the display. The program number "8" is dis-

_o

L 8:os..

played with current time.

- 22 -

-or_,k

EN

5CI6

When the programs overlap, Quick Set Program has priority. But if an another program has been acti- vated when the start time of the Quick Set Program comes, the Quick Set program will be begun after finished the faster program.

I

PROGRAM

I

2

TO CANCEL A QUICK SET

PROGRAM

• While setting a program; press STOP/EJECT button on the VCR.

• After setting a program; (power must be on)

First, press QUICK SET PROGRAM button.

Then, press STOP/EJECT button.

• While recording is in progress; press STOP

/EJECT button.

9:00PM

I

10:00PM i

11:00PM

12:00AM

If you program as per the illustration the timer recording would be carried out as follows.

9:00AM - 11:00AM for PROGRAM 1

11:00AM12:00PM for PROGRAM 8

12:00PM -

(Quick Set Program) for PROGRAM 2

TO CHECK THE START/END TIME

To check the start!end time and channel number, first press POWER/TIMER REC button so that "[]" indicator appears, then press QUICK SET PROGRAM button once. Both the start and end time will appear for

3 seconds each, and return to the Timer Stand-by m_xle.

I_

[] reT¢l

[]

START ra]_!

[]

8

WED

!,

S:D-I

I,

8

WED

CH

9:30 61

8

WED

CH

HINTS

• If there is a power failure or the VCR is unplugged for more than 3 seconds, the clock setting and all timer settings will be lost.

• If the tape runs out before the end time, the VCR will switch to the Stop mode immediately, eject the tape and the VCR power will be turned off. The "1_" indicator will flash.

• If a tape is not inserted or the erase-protection tab is removed, the "[]" indicator flashes and automatic timer recording cannot occur. Insert a tape that allows recording.

• The TV that is connected to your VCR may be turned ON or OFF when the VCR is in the timer-record mode.

- 23 EN

,k-Cr,_ 4_-k 5C16

INDEX SEARCH

This feature provides a method of indexing the starting point so that it can be easily returned to in either fast forward or rewind mode.

• The index mark will be made automatically when the REC button is pressed. It will also be marked at the starting point of Timer recording and OTR.

• The index mark is not recorded if the PAUSE/STILL button is pressed and released during recording.

• The time gap between making the index marks on the tape should be greater than 1 minute for SP recording, 2 minutes for LP recording and 3 minutes for SLP recording.

NOTES:



(CH 3 or 4)



Example: You are watching program number 4 and want to fast forward to program number 7. You must skip three programs.

CURRENT PLAYBACK PROGRAM

II

4

INDEX MARK

3 2 1 1 2 3

Press INDEX SEARCH button. Index Search mode appears on the TV screen.

When the preset program is reached, normal playback will start.

Press the number button corresponding to the number of programs that you want to skip.

To correct the Index number, press DELETE button and re-enter the correct number.

Press REWIND or F.FWD

button. The VCR begins rewinding or fast forwarding then goes into playback mode at the beginning of desired program.

•

INDIE_I_ARCH

J' u

Note: Every time an index signal is skipped, the number in the program indicator decreases by one.

Notes:

• Index search can be set up to 20.

• This function is not operative in recording mode.

• Procedures must be followed within 30 seconds, from steps [1] to [2]. Otherwise the Index Search mode will be cancelled.

• A video cassette must be inserted in the VCR for this function to work.

• Press STOP button on the VCR or remote control unit to exit the Index Search mode.

- 24 EN

• r_gc_r it 5B24

TIME SEARCH

The Time Search function makes it possible to quickly advance the tape from any position by entering the exact desired amount of playback time of the part that you want to skip.



(CH 3 or 4)



Example: To watch a program after 2 hours 53 minutes from present position to forward direction.

Press TIME SEARCH button. The HOUR digits flash.

Enter the desired hour with

number buttons.

] Notes:

• Time search can be set up to 9:59.

• Procedures must be followed within 30 seconds from steps [1] to [3]. Otherwise the Time Search mode will be cancelled.

• This function is not operative in recording mode.

• A video cassette must be inserted in the VCR for this function to work.

• Press STOP button on the VCR or remote control unit to exit the Time Search mode.

Enter the desired minutes with number buttons.

To correct the time, press

DELETE button and repeat steps [1] to [3].

Press EFWD or REWIND button. The tape will move to the specified point.

Note: The time counts down as the searching progresses.

When 0:00 is reached, the tape will start playback automatically.

- 25 EN

_r ,lit,lit_ _ 5B24

BLANK SEARCH

This function enables you to search lot the unrecorded porlioJ, ol the tapc in the forward direction.

• Tape must be fully rewound.



(CH 3 or 4)



Note:


Press BLANK SEARCH button. Blank Search function starts automatically in the forward direction.

vrl

The VCR begins fast forwarding to the beginning of the blank part of the tape.

The tape will automatically stop.

I STOP

- 26 -

EN

"k "Or"_"_ _ 5B24

SETTING THE REMAINING TIME

You can set the remaining tape running time of your tape.

• If your cassette tape length is T- 130 or less, select "~T 130". For example, the popular T- 120 cassette tape calls for the "~Ti 30" selection. If your cassette tape is T-140 or greater, select "T140-". Then the tape remaining indication will be correct.

NOTES:



(CH 3 or 4)



FT1

Press MENU button. Select item 2(VCR SET UP) with number buttons.

1

3

11MER

UP

INITIALIZE

MENU ]

REMAINING

DISPLAY

TAPE RUNNING TIME

• Since the reel diameter and tape thickness are not common to all cassettes, the time count differs from cassette to cassette. Use the time display as an informative number only.

Select "-TI 30" or 'q'l 40~" with 1 button.

~T1 TAPE SELECT

REPEAT PLAY

RENTAL i ........ t

• During recording, the remaining tape running time is estimated based on the current recording mode

(SP, LP, SLP).

• During playback the remaining tape running time is calculated based on the current playback mode.

• Remain time will not appear on TV screen while in the Fast forward or Rewind Mode.

Press MENU button to return to normal mode.

• There will be a delay of up to 1 minute before the remain time appears on the TV display.

Note:

To check the remain time, press SELECT button on the remote control unit until RE-

MAIN appears on TV screen.

Notes:

/

/'_'Y"

,o REM _,,N ....

T,30

1

The use of the following tapes will result in difference between the displayed remaining time and actual time to the end of the tape:

• Tape housed in a VHS-C cassette adapter.

• Shorter tape length such as a 10-minute cassette

• T-180 cassette. In this case the display may read 2

Hours, 40 Minutes at the start point of the tape in SP mode.

• In the Remain Time Mode calculating will start when the cassette tape is inserted and PLAY button is pressed.

While calculating, the TV screen shows as illustrated.


- 27 EN

** €__r_ 5B24

JUST-IN TIME RECORDING

This function allows you to fully utilize the available tape length for timer recording. The VCR calculates the remaining tape amount and then adjusts the tape speed from SP to SLP as needed.

If it is suspected that the end of the tape will be reached before the reserved program ends (as long as SP mode is kept all the way), set recording mode to AUTO. This function is available only with Program No. 1 and Quick Set

Program.

The auto mode starts recording in SP mode. The internal circuit compares the rest of the program against the available tape length. If the internal circuit determines that the available tape is not long enough to record the program in the SP mode, the Recording mode is automatically changed to SLP mode. This will assure coverage of the desired timer program before the end of the tape is reached.

Conventional Video Recording

Recording In SP mode for 40 minutes

Just-In Time Recording

Tape End

I left unrecorded

Recording in SLP mode for30 minutes

_..

Recording mode automatically changes to SLP mode

Notes:

• Set the tape remainder switch ("~TI30" or "I'140J') to the tape loaded.

• Even if SLP mode is selected, just-in time recording cannot compensate for a tape length which may be too short.

• A momentary picture break up will occur at the point on the tape when the recording speed changes from SP to SLP.

• The displayed remaining tape running time may not always match the actual remaining time on the tape (usually longer than the actual time). It is recommended to set the end of the reserved recording time several minutes after the end of the TV program.

- 28 -

_.¢r_

EN

5B24

OTR (ONE TOUCH RECORDING)

The One Touch Recording function enables you to record a program simply by pressing OTR button on the VCR.

According to the table, simply press OTR button as many times as needed to set the desired recording length. The channel number to be recorded and recording length will be shown on the display.

NOTE: This function cannot be done by the remote control.

Turn on the VCR.

Set the VCR to the channel to be recorded.

Press OTR button.

i OTR

SP

(_:20)

Recording starts immediately when the OTR button is pressed, at least two times whether if you are watching the same or a different channel. T!)e recording length will be determined by the number of times you press

OTR button.

PUSH(ES)

1 push

2 pushes

3 pushes

4 pushes

5 pushes

6 pushes

7 pushes

8 pushes

9 pushes

10 pushes

I I pushes

12 pushes

13 pushes

14 pushes

15 pushes

16 pushes

17 pushes

18 pushes

DISPLAY

0:00

0:30 i:00

! :30

2:00

2:30

3:00

3:30

4:00

4:30

5:00

5:30

6:00

6:30

7:00

7:30

8:00

0:00

• Each time you press OTR button, you will extend the recording time by 30 minutes at a time up to 8-hours (or to the end of the tape).

• When OTR button is pressed 18 times, the VCR will switch to the Stop mode immediately and the VCR power will be turned off.

• To stop the OTR operation, press STOP button.

• The recording length time remaining is indicated on the display as the recording is started.

• Recording stops when 0:00 is reached.

• Please note that in the SLP mode maximum recording time, assuming the tape is started at the beginning, is 8 hours using T- 160 (or 6 hours using T- 120).

• The TV that is connected to your VCR may be turned on or off during OTR recording.

MONITORING RECORDING

LENGTH

0:00

30 minutes

60 minutes

90 minutes

120 minutes

150 minutes

180 minutes

210 minutes

240 minutes

270 minutes

300 minutes

330 minutes

360 minutes

390 minutes

420 minutes

450 minutes

480 minutes

0:00

If you set the TV channel to 3 oi 4 channel, press

TV/VCR button so that "VCR" appears on the display.

Turn on the TV and set the TV channcl to the same video output channel located on the back of the VCR.

(CH 3 or 4)

• If you connect VCR to TV using AV cord, set your TV to the VCR mode using TV/VCR button of your TV.

- 29EN

PLAYBACK

Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR.

(CH3 or 4) vrl

Insert a tape. VCR will automatically turn on. Press

PLAY button.

(If the erase-protection tab has been removed, the

VCR will start playback automatically.)

If a tape is already in the VCR, press PLAY button on

the VCR. Power will turn on and playback will start automatically. (Direct Button Operation)

Ifa tape is already in the VCR, Press POWER button

to turn on, and then press PLAY button on the remote control.

Press STOP button when playback is completed.

AUTO REPEAT PLAYBACK

The VCR has an auto repeat function that allows you to repeat a tape indefinitely.



(CH 3 or 4)



TO EXIT THE REPEAT PLAY MODE

Repeat steps [ 1] and [2]. "ON" will then disappear from the menu.


2(VCR SET UP) with number buttons.

I i

TIMER pROGRAM

VGR SETUP

NTIALIZE

M4NO

MENU

Select item 2(REPEAT

PLAY) with number buttons.

"ON" will appear next to

'_REPEAT PLAY".

Ii

TAPESELECT

REPEAT PLAY

RENTAL

VCRSETUP

-T130

]

Repeat playback will start

_ automatically.

IREPEAT PLAY i_.

Note: Once you select the repeat play mode, it stays in effect even after you turn off the VCR.

- 30EN

"A"k _r _ 5C16

REN'IAL

PLAY

This function enables you to improve tile picture quality when playing back worn cassettes such as those rented from a video shop.



(CH 3 or 4)


• You

must use remote

control for this

procedure.

Insert rental tape into VCR. VCR will automatically start tape playback.

TO EXIT THE RENTAL PLAY MODE

Repeat steps [I] to [3]. Then, follow step [4], but select

"OFF" for normal playback.


2(VCR SET UP) with number buttons.

,E_

1 TIMER pF_GP_MMtNG uP_,T_

Select item 3(RENTAL) with number buttons.

_"_

Press SELECT button repeatedly to select "ON".

I L

RENTAt ON

NOTES:

• Once you select the rental play mode, it stays in effect even after you turn off the VCR.

• Selecting ON or OFF must be done in the play mode only.

- 31 -

-,4_

EN

5CI6

COUNTER MEMORY

The TAPE COUNTER MEMORY button can be used during rewind or fast forward to automatically stop the tape when the counter reaches a preset memory position of approx.0:00:00.

For example, this feature can be used to return the tape to a pre-selected position immediately after recording, or to repeatedly playback a certain portion of a tape.

NOTE: You must use remote control for this procedure.

Tape Start Fast Forwards Auto-Stop

Counter Point

Rewinds Tape End

7rl

Insert a cassette tape with its safety tab in place, if necessary, rewind or fast forward the tape to the point at which you want to begin recording.

rT1

If the counter is not shown

0:00:00, press TAPE

COUNTER RESET button to reset to 0:00:00.

TO CANCEL THE COUNTER MEMORY

When the counter appears on the display, press TAPE

COUNTER MEMORY bu tton so that "M" disappears from the TV screen.

Press TAPE COUNTER

MEMORY button so that

"M" appears on the TV screen.

Press RECORD or PLAY button.

Press STOP button when recording or playback is completed .........

ISTO P

(If the counter is not displayed, press SELECT button so that the counter appears on the VCR display or on the TV screen.)

(.m.,., To activate the counter memory function, press RE-

WIND button. The tape will automatically stop when the counter retums to 0:00:00.

.

o:,_:_o

- 32 -

_r,k _ _t_r 5C

E_

SPECIAL FEATURES

l Picture Search (SP/LP/SLP Mode) J

You may view a video tape at a high speed in either a forward or reverse direction. This feature is useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted.

Forward Direction:

When in the Play mode, press F.FWD button to view the tape at a fast speed in the forward direction.

Reverse Direction:

To view the tape at a fast speed in the reverse direction, press REWIND button in the Play mode.

For normal speed, simply press PLAY button.

]

Super High Speed Search (LP/SLP Mode) J

For Picture Search in super high speed:

1) Press either F.FWD or REWIND button while the unit is in the Play mode.

2) Release button.

3) Depress it again. The unit will now search in super high speed.

For normal playback simply press PLAY button.

Still Picture During Playback

If you press PAUSE button during playback, the picture will "freeze" on the screen. You may use this feature to study details of a particular scene. Press PLAY button to continue playback.

NOTE: The VCR will automatically switch to the Stop mode, if it is left in the Pause mode for more than five minutes.

Vertical Hold Control [

When the picture begins to vibrate vertically, adjust to stabilize the picture by pressing CH &or • button on the VCR.

NOTES:

• This adjustment works only in the Still mode with

CH • or • button on the VCR.

• When the picture is distorted or roiling vertically, adjust vertical hold control on your TV.

• Some newer TV's do not have a user adjustable vertical hold control.

Tracking Adjustment

• Tracking adjustment will be set automatically (Digital TRacking function) when you start playback.

"DTR" appears on the display.

• When playing pre-recorded tapes or tapes recorded on units other than your own, noise lines (black and white streaks) may appear on the playback picture.

If this occurs, adjust the tracking control by pressing

CH • or • button until the streaks disappear. To return to the DTR function, stop the tape once and start playback again.

Slow Tracking

• You can reduce the noise lines by pressing CH • or

• button in slow mode, too. Slow tracking adjust-

ment will not be set automatically.

Note: Press SLOW button in Still mode and press

CH • or • button until the streaks disappear. To return to Still mode, press PAUSE/STILL button again.

This enables you to see the picture in its entirety without distracting noise lines.

Auto Rewind

When the end of a tape is reached during recording, playback, or fast-forward, the tape will automatically rewind to the beginning (or to the 0:00:00 counter reading if the memory function is activated), eject, and the

VCR will turn off.

NOTES:

• The tape will not auto-rewind during timer recording or One Touch Recording.

• When the tape is rewound to the preset memory position, the tape will not eject and the VCR will not turn off.

I Slow Motion

-"DTR"

I

Press SLOW button to reduce the playback speed. The

VCR mutes the sound during slow motion. You can control the speed by pressing EFWD button (faster) or

REWIND button (slower).

PressPLAY button to returnto normalplayback.

- 33 -

_*,k*

EN t 5CI6

VIDEO CASSETTE TAPE

This VCR will operate with any cassette that has the

VHS mark. For best results we recommend the use of high-quality tapes.

• Do not use poor quality or damaged tapes.

The table below shows the recording/playback time using "1"-60,T-120 or T-160 tapes in the SP, LP or SLP mode.

MODE CASSE'ITE

T-60 3"-i20 T-160

SP Mode

LP Mode

SLP Mode

I hour

2 hours

3 hours

2 hours

4 hours

6 hours

2-2/3 hours

5-I/3 hours

8 hours

INSERTING A CASSETTE

Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the cassette until it is drawn into the VCR.

The VCR will automatically turn on, and cassette-in indicator will light when the cassette is properly inserted.

CORRECT

II n f

WRONG

_t

_.

j

When handling video tapes, follow the precautions below:

• Avoid moisture, which can condense on the tape if it is moved from a cold place to a warm place. Playing a tape that has moisture in it will damage the tape and your VCR. Before using a tape with these conditions, wait until the tape has wanned to room temperature and the moisture has evaporated.

• Avoid extreme heat, high humidity and magnetic fields.

• Do not tamper with the Cassette mechanism.

• Do not touch the tape with your fingers.

REMOVING A CASSETTE

Press EJECT button on the unit or on the remote control.

When the cassette-in indicator goes off and the cassette stops moving, pull the cassette out of the cassette compartment and store it properly.

ERASE PREVENTION

You may prevent accidental erasing of a tape by breaking off the tab on the back edge of the cassette. If you decide to record on the tape again, cover the hole with plastic tape.

Store the cassette in its case as shown.

NTab

Plastic Tape

- 34-

*****

EN

5CI6

TROUBLESHOOTING GUIDE

If you have followed the instructions contained in this manual and have difficulty in operating your VCR, locate the SYMPTOM in the left column below. Check the corresponding POSSIBLE CAUSE and CORRECTIVE

ACTION columns to remedy the problem.

SYMPTOM

No power.

Timer recording is not possible.

Rec mode cannot be engaged.

No picture or poor picture on playback.

POSSIBLE CAUSE

•

• Power cord is not connected.

VCR POWER is off.

•

• The timer recording is set incorrectly.

VCR clock is not set correctly.

• The record safety tab on cassette is missing.

The TV channel selector is not set to

the proper channel.

CORRECTIVE ACTION

• Connect power cord to AC outlet.

• Press POWER button to turn on the VCR.

• Set the timer recording correctly.

• Set VCR clock correctly.

• Place vinyl tape over missing safety tab.

No picture on TV.

Noise in picture on playback,

Playback picture is partially noisy,

On-the-air TV programs cannot be seen.

No operation by infrared

Remote Control.

Operation buttons do not work after there is a power failure or you move your VCR.

• The TV fine tuning is not set correctly.

• The VCR is in TV mode.

* Video heads are dirty.

• The TRACKING control is not set correctly,

• Connections are not correctly made.

• Weak batteries.

• Channel Memory Programming is proceeded because programmed channels are erased.

On playback, set the TV to channel 3 or 4 for video output channel. Then, press

TV/VCR button so that "VCR" appears on the display.

• Fine tune your TV.

• Press TV/VCR button.

• Head cleaning is necessary, consult the nearest Sears Authorized Service Center.

• Adjust TRACKING control for a better picture.

• Re-check the ANT. IN and ANT. OUT connections.

• Check the batteries in Infrared Remote

Control.

• See "Note" under "Channel Memory

Programming" on page 14.

- 35 -

MAINTENANCE

[l_! LIK_I_JII[_[lfl

• Wipe the front panel and other exterior surfaces of the VCR with a soft cloth immersed in lukewarm water and wrung dry.

• Never use a solvent or alcohol. Do not spray insecticide

liquid near the VCR. Such chemicals may cause dam- age and discoloration to the exposed surfaces.

• Should your VCR become inoperative, do not try to correct the problem by yourself. There are no userserviceable parts inside. Turn off, unplug the power cord, and take the unit to Sears Authorized Service

Center for servicing.

Picture playback may become blurred or interrupted while the TV program reception is clear. This does not mean that the recorded program has been erased.

Dirt accumulated on the video heads after long periods of use, or the usage of rental or worn tapes can cause this problem. If a steaky or snowy picture appears during playback, the heads in your VCR may need to be cleaned.

Please visit your local

Audio/Video store and purchase a good quality VHS

Video Head Cleaner. Remember to read the instructions included with the head cleaner before use.

Clean heads only when problems occur. If this does not correct the problem, consult the nearest Sears

Authorized Service Center. Professional video head cleaning requires highly technical attention.

HOW TO ORDER REPAIR PARTS

SEARS SERVICE

Your Sears Video Cassette Recorder has added value when you consider that Sears has service units nation-

wide staffed with Sears trained tecbnicians,.,profes-

ional technicians

specifically

trained on Sears home

tertainment products, having the parts, tools and quipment to insure that we meet our led e to ...

We Service What We Sell".

P g you

Now that you have purchased your Video Cassette Recorder, should a need ever exist for repair parts to service, simpl), contact an)' Sears

Service Center

or Sears,

.....

,e.

fr _f#O#g¢

Roebuck and Co store. Be sure toprovide all pertinent

facts when you call or visit.

The Model Number will be found on the rear of cabinet. Always mention the Model Number when requesting service or repair parts for your VCR.

/

- 36 -

EN

_'_"k _-k 5B24

SPECIFICATIONS

Television system

Video head

Tape width

Tape speed

SP

LP

SLP

Tuner channel

VHF

UHF

Cable channel

RF converter

Converter output

Timer indication

Operating temperature

Terminals

Antenna input

Antenna output

Video input/output

Audio input/output

: NTSC, TV standard

: Rotary 4-head Double

Azimuth Video System

: l/2inch (12.65mm)

: 33.35mm/sec.

: 16.67mm/sec.

: 11.12mm/sec.

: #2~#13

: # 14~#69

5A, A-5 - A-l, A ~ W+84

Built-in VHF converter

VHF Channel 3 or 4.

: AM/PM 12-hour system

: 5°C~40°C (41°F~I04°F)

: F type connector x 1

: F type connector x 1

: RCA connector x 3

: RCA connector x 3

Video output level

Video output impedance

Audio output level

Video input level

Audio input level

Video S/N ratio

SP

Audio S/N ratio

SP

: 1Vp-p

: 75_

: -6dBv (IKHz)

: 0.5-2.0Vp-p

: -10dBv

: More than 42dB

: More than 38dB

C01I11101ItK_I_II

Power requirement

Power consumption

Dimensions

Weight

Accessories, included

[ ,0_IIKO_3

: 120V, 60Hz

: 17 Watts

: W 14-1/4" (360ram)

H 3-5/8" (92mm)

D 10" (252mm)

: 7.01bs. (3.2 Kg.) (Approx.)

: Remote control unit

2 "AA" Batteries

: Owner's Manual

: Coaxial cable

• Designs and specifications are subject to change without notice and without our legal obligation.

37 EN

•_* "A" 5B24

MEMO

- 38 EN

_ _ ,A,,k-k 5B24

For the repair or replacement parts you need

Call 7 am - 7 pm, 7 days a week

1-800-366-PART

(1-800-366-7278)

For in-home major brand repair service

Call 24 hours a day, 7 days a week

1-800-4-REPAIR

(1-800-473-7247)

For the location of a

Sears Repair Service Center in your area

Call 24 hours a day, 7 days a week

1-800-488-1222

For information on purchasinga Sears

Maintenance Agreement or to inquire about an existing Agreement

call 9 am - 5 pm, Monday-Saturday

1-800-827-6655

mmmmmm

mmmmmm

America's Repair Specialists

OWNER'S

MANUAL

MODEL NO.

934.55125590

SEARS

VIDEO CASSETTE

RECORDER WITH

REMOTE CONTROL

Your Sears Video Cassette Recorder has added value when you consider that Sears has service units nationwide staffed with Sears trained technicians-professional technicians specifically trained on Sears home entertainment products, having the parts, tools and equipment to ensure that we meet our pledge to you - "We Service What We Sell."

Should a need ever exist for repair parts or service, simply contact any Sears Service Center/Department.

IWARRANTYJ

For 90 days from the date of purchase, Sears will repair any defect in material or workmanship in this video cassette recorder, free of charge, For one year from the date of purchase, Sears will supply, at no charge, replacement for defective parts.

The above warranty coverage applies only to video cassette recorders which are used for private household purposes.

TO OBTAIN WARRANTY SERVICE, SIMPLY RETURN

THE VIDEO CASSETTE RECORDER TO THE NEAREST

SEARS SERVICE CENTER / DEPARTMENT IN THE

UNITED STATES.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

Sears, Roebuck and Co.

Dept. 817WA, Hoffman Estates, IL 60179

Z

Printed in Hong Kong

0VMN01588

H3380UD *_'***

Sears 934.5512559 Owner's Manual

OWNER'S

MANUAL

CONTENTS

VIDEO

CASSETTE

RECORDER

lSK OFE--

IMPORTANT SAFEGUARDS

mast and supportingslruclure,

PRECAUTIONS

I[oIe_YU(O_

FEATURES

Program-

SUPPLIED ACCESSORIES

OPERATING CONTROLS AND FUNCTIONS

--FRONT VIEW--

20

--REAR VIEW AND TERMINALS---

IIIIIIIIIIIIIII

0"

]

REMOTE CONTROL OPERATION

! !

[o]u u

8 RECORD button-Press to begin manual recording.

to

SLOW [+] Function

9

8

0

1

ANTENNMCABLE SYSTEM CONNECTIONS

L =xj

I. • - €1

I" - "

©

_O]RLglP#___

l- ov,0 oe

++

, II°o

9oo,9

TO COPY A VIDEO TAPE

TO MONITOR THE RECORDING

TO RECORD AND VIEW A SCRAMBLED/UNSCRAMBLED CHANNEL.

CONTROLLING VCR INPUT & OUTPUT

CHANNEL MEMORY PROGRAMMING

(Without a Cable Box)

To preset channel memory again

DELETING PRESET CHANNELS ADDING PRESET CHANNELS

• To check the channel(s) that has been added, press

iE'I"IING THE CLOCK

TO CHANGE CLOCK SETTING

TO CHANGE THE LANGUAGE

VIEWING AND RECORDING THE SAME

PROGRAM

TO DELETE SCENES DURING

RECORDING

EDIT SEARCH

RECORDING ONE PROGRAM WHILE

VIEWING ANOTHER

TO MONITOR THE PROGRESS OF

YOUR RECORDING,

AUTOMATIC TIMER RECORDING

..

I":D:sL£i

,

CHECKING TIMER PROGRAMS

TO STOP RECORDING

TO CORRECT OR CANCEL

A PROGRAM

AUTOMATIC TIMER RECORDING

HINTS

QUICK SET PROGRAM

to 15].

TO CANCEL A QUICK SET

PROGRAM

TO CHECK THE START/END TIME

!,

I,