Datalogic D130 Readers Barcode Reader Quick Reference Guide

CONNECTIONS
Datalogic ADC, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
DISCONNECTING THE CABLE
USB
©2007-2015 Datalogic, Inc.
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the
procedures described therein may be reproduced or transmitted in any form or by any means
without prior written permission of Datalogic ADC, Inc. or its subsidiaries or affiliates ("Datalogic"
or “Datalogic ADC”). Owners of Datalogic products are hereby granted a non-exclusive,
revocable license to reproduce and transmit this documentation for the purchaser's own internal
business purposes. Purchaser shall not remove or alter any proprietary notices, including
copyright notices, contained in this documentation and shall ensure that all notices appear on any
reproductions of the documentation.
Heron™
D130 READERS
PATENTS
See www.patents.datalogic.com for patent list
QUICK REFERENCE GUIDE
Should future revisions of this manual be published, you can acquire printed versions by
contacting your Datalogic representative. Electronic versions may either be downloadable from
the Datalogic website (www.datalogic.com) or provided on appropriate media. If you visit our
website and would like to make comments or suggestions about this or other Datalogic
publications, please let us know via the "Contact Datalogic" page.
This product is covered by one or more of the following patents:
Utility patents: EP0789315B1, EP0851378B1, EP0895175B1, EP0926620B1, EP0997760B1,
EP1128315B1, EP1164536B1, EP1205871B1, EP1205873B1, EP1396811B1, EP1413971B1,
US5992740, US6260764, US6305606, US6712271, US6808114, US6834806, US6871785,
US6997385, US7075663, US7387246, USRE41349.
WEDGE
DATALOGIC ADC LIMITED FACTORY WARRANTY
DISCLAIMER
Datalogic has taken reasonable measures to provide information in this manual that is complete
and accurate, however, Datalogic reserves the right to change any specification at any time
without prior notice. Datalogic and the Datalogic logo are registered trademarks of Datalogic
S.p.A. in many countries, including the U.S.A. and the E.U. All other trademarks and trade
names referred to herein are property of their respective owners.
Warranty Coverage
Datalogic warranties this product against defects in workmanship and materials, for a period of 5
years from the date of shipment, provided that the product is operated under normal and proper
conditions.
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through its website. Log on to
www.datalogic.com and click on the links indicated for further information including:
•
•
•
Datalogic ADC ("Datalogic") hardware products are warranted against defects in material and
workmanship under normal and proper use. The liability of Datalogic under this warranty is
limited to furnishing the labor and parts necessary to remedy any defect covered by this warranty
and restore the product to its normal operating condition. Repair or replacement of product during
the warranty does not extend the original warranty term. Products are sold on the basis of
specifications applicable at the time of manufacture and Datalogic has no obligation to modify or
update products once sold.
RS-232
PRODUCTS
Search through the links to arrive at your product page where you can download specific
Manuals and Software & Utilities including:
- Datalogic Aladdin™ a multi-platform utility program that allows device configuration
using a PC. It provides RS-232 interface configuration as well as configuration
barcode printing.
SERVICE & SUPPORT
- Technical Support - Product documentation and programming guides and Technical
Support Department in the world
- Service Programs - Warranty Extensions and Maintenance Agreements
- Repair Services - Flat Rate Repairs and Return Material Authorization (RMA)
Repairs.
- Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc.
CONTACT US
Information Request Form and Sales & Service Networks
DECLARATION OF CONFORMITY
13
Datalogic ADC Srl, Via S. Vitalino, 13
Lippo di Calderara di Reno (BO) 40012 Italy
La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di Datalogic ADC Srl
per:
This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC Srl for:
Cette déclaration de conformité est établie sous la seule responsabilité de Datalogic Srl pour:
Diese Konformitätserklärung wird unter der alleinigen Verantwortung des Datalogic ADC Srl erteilt für:
Esta declaración de conformidad se expide bajo la exclusiva responsabilidad de Datalogic ADC Srl para:
HERON D1XX ; Barcode Reader
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
2004/108/EC – EMC Directive
2011/65/EU – RoHS Directive
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla
sicurezza dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and product
safety.
Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité
des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit
und Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad
electromagnética y las Medidas de seguridad relativas al producto.
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
EN 55022 (CLASS B ITE), SEPTEMBER 2006:
AMENDMENT A1: OCTOBER 2007:
LIMITS AND METHODS OF MEASUREMENTS OF RADIO
DISTURBANCE CHARACTERISTICS OF INFORMATION
TECHNOLOGY EQUIPMENT
EN 55024, SEPTEMBER 1998:
AMENDMENT A1:2001+A2:2003:
INFORMATION TECHNOLOGY EQUIPMENT
IMMUNITY CHARACTERISTICS
LIMITS AND METHODS OF MEASUREMENT
EN 50581, SEPTEMBER 2012:
TECHNICAL DOCUMENTATION FOR THE ASSESSMENT
OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH
RESPECT TO THE RESTRICTION OF HAZARDOUS
SUBSTANCES
Lippo di Calderara, March 29th, 2013
PEN
820074014
(Rev. J)
April 2015
CHINA ROHS STATEMENT
EC-030
Rev.: 4
Pag.: 1 di 1
Ruggero Cacioppo
Quality & Reliability Manager – Europe
If Datalogic determines that a product has defects in material or workmanship, Datalogic shall, at
its sole option repair or replace the product without additional charge for parts and labor, or credit
or refund the defective products duly returned to Datalogic. To perform repairs, Datalogic may
use new or reconditioned parts, components, subassemblies or products that have been tested
as meeting applicable specifications for equivalent new material and products. Customer will
allow Datalogic to scrap all parts removed from the repaired product. The warranty period shall
extend from the date of shipment from Datalogic for the duration published by Datalogic for the
product at the time of purchase (Warranty period). Datalogic warrants repaired hardware devices
against defects in workmanship and materials on the repaired assembly for a 90 day period
starting from the date of shipment of the repaired product from Datalogic or until the expiration of
the original warranty period, whichever is longer. Datalogic does not guarantee, and it is not
responsible for, the maintenance of, damage to, or loss of configurations, data, and applications
on the repaired units and at its sole discretion can return the units in the "factory default"
configuration or with any software or firmware update available at the time of the repair (other
than the firmware or software installed during the manufacture of the product). Customer accepts
responsibility to maintain a back up copy of its software and data.
COMPLIANCE
LED CLASS
Class 1 LED product.
This product conforms to EN60825-1:2001.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval
of Datalogic could void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference which
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
POWER SUPPLY
This device is intended to be connected to a UL Listed/CSA Certified computer
which supplies power directly to the reader or else be supplied by a UL Listed/CSA
Certified Power Unit marked “Class 2” or LPS power source rated 5 V, minimum 180
mA, which supplies power directly to the reader via the power connector of the
cable.
WEEE COMPLIANCE
For information about the disposal of Waste Electrical and
Electronic Equipment (WEEE), please refer to the website at
www.datalogic.com.
CUSTOMS UNION
The CU conformity certification has been achieved; this allows the Product to bear
the Eurasian mark of conformity.
Warranty Claims Process
In order to obtain service under the Factory Warranty, Customer must notify Datalogic of the
claimed defect before the expiration of the applicable Warranty period and obtain from Datalogic
a return authorization number (RMA) for return of the product to a designated Datalogic service
center. If Datalogic determines Customer's claim is valid, Datalogic will repair or replace product
without additional charge for parts and labor. Customer shall be responsible for packaging and
shipping the product to the designated Datalogic service center, with shipping charges prepaid.
Datalogic shall pay for the return of the product to Customer if the shipment is to a location within
the country in which the Datalogic service center is located. Customer shall be responsible for
paying all shipping charges, duties, taxes, and any other charges for products returned to any
other locations. Failure to follow the applicable RMA policy, may result in a processing fee.
Customer shall be responsible for return shipment expenses for products which Datalogic, at its
sole discretion, determines are not defective or eligible for warranty repair.
Warranty Exclusions
The Datalogic Factory Warranty shall not apply to:
(i) any product which has been damaged, modified, altered, repaired or upgraded by
other than Datalogic service personnel or its authorized representatives;
(ii) any claimed defect, failure or damage which Datalogic determines was caused by
faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper
storage or use of parts or accessories not approved or supplied by Datalogic;
(iii) any claimed defect or damage caused by the use of product with any other
instrument, equipment or apparatus;
(iv) any claimed defect or damage caused by the failure to provide proper maintenance,
including but not limited to cleaning the upper window in accordance with product
manual;
(v) any defect or damage caused by natural or man-made disaster such as but not
limited to fire, water damage, floods, other natural disasters, vandalism or abusive
events that would cause internal and external component damage or destruction of
the whole unit, consumable items;
(vi) any damage or malfunctioning caused by non-restoring action as for example
firmware or software upgrades, software or hardware reconfigurations etc.;
(vii) the replacement of upper window/cartridge due to scratching, stains or other
degradation and/or
(viii) any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch
screen, triggers etc.).
No Assignment
Customer may not assign or otherwise transfer its rights or obligations under this warranty except
to a purchaser or transferee of product. No attempted assignment or transfer in violation of this
provision shall be valid or binding upon Datalogic.
DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT
LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE
FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM DELAYS IN THE
REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY SET
FORTH IN THIS WARRANTY STATEMENT IS THE CUSTOMER'S SOLE AND EXCLUSIVE
REMEDY FOR WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE
LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY
INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES
REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY
OF SUCH DAMAGES.
Risk of Loss
Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall
assume risk of loss or damage for product in Datalogic's possession. In the absence of specific
written instructions for the return of product to Customer, Datalogic will select the carrier, but
Datalogic shall not thereby assume any liability in connection with the return shipment.
RESTORE DEFAULT
DEFAULT VALUES
USB-KBD DEFAULT SETTINGS
USA keyboard, FIFO enabled, inter-character and inter-code delays disabled,
control character emulation = ctrl+shift+key.
DATA FORMAT:
code identifier disabled, no field adjustment, code length not
transmitted, no header, terminator = ENTER, character replacement disabled.
KEYBOARD NATIONALITY
RESTORE DEFAULT
USING HERON SERIES READERS
USB-KBD and Wedge users should select one of the following wedge keyboard
nationality codes according to your keyboard.
Ì$+$*oÎ
To change the defaults refer to the HHD II Software Configuration Manual, or to the
Datalogic Aladdin Configuration program, both downloadable from the website.
Belge
Ì$+FJ7$-8Î
RS232 Standard DEFAULT SETTINGS
9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx
timeout 5 sec., ack/nack disabled, FIFO enabled, serial trigger lock disabled.
DATA FORMAT:
code identifier disabled, no field adjustment, code length not
transmitted, no header, terminator = CR-LF, character replacement disabled.
Deutsch
Select one of the interface codes according to your application.
WEDGE DEFAULT SETTINGS
USA keyboard, caps lock off, caps lock auto-recognition enabled, num lock
unchanged, inter-character and inter-code delays disabled, control character
emulation = ctrl+shift+key.
DATA FORMAT:
code identifier disabled, no field adjustment, code length not
transmitted, no header, terminator = ENTER, character replacement disable.
USB INTERFACE SELECTION
•
•
Español
Ì$+FJ6$-3Î
Ì$+UA04$-@Î
interpret mode, conversion to code 39 disabled, output level normal, idle level
normal, minimum output pulse 600 µs, overflow medium, inter-block delay disabled.
•
Italiano
Ì$+FJ1$-ÅÎ
USB-IBM-Hand Held
Ì$+UA01$-.Î
Standard Code 39
no check digit control, variable length code; 1-99 characters
Disabled codes
EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI,
Plessey, Telepen, Delta IBM, Code 11, Code 16K, Code 49, RSS Codes
PEN EMULATION INTERFACE SELECTION
PEN
Ì$+CP6$-BÎ
RS-232 INTERFACE SELECTION
TECHNICAL FEATURES
RS-232 Standard
Heron D130
Ì$+FJ8$-=Î
Svenskt
Ì$+FJ5$-.Î
USA (Default)
Ì$+FJ0$-|Î
STAND INSTALLATION
DATA FORMAT TERMINATORS
Illuminator
Wavelength
Max. LED Output Power
Ì$+CM2EC0$->Î
5 Vdc ± 5%
180 mA @ 5 Vdc
155 mA @ 5 Vdc
< 2,5 mA @ 5 Vdc
256 scans/sec
Fujitsu
CR-LF
Ì$+EA120D0A$-ÃÎ
Ì$+CM1$-ÈÎ
B
ICL Mode
Enter
Ì$+CM0$-ÃÎ
LED, Good Read Spot, Beeper
CCD solid state (2048 pixels)
LED array
630 ~ 670 nm
0.31 mW
LED Safety Class
Class 1 EN 60825-1
Reading Field
2 ~ 27 cm (20 mils)
Max. Resolution
PCS (Datalogic Test Chart)
0.10 mm (4 mils)
min. 15%
Environmental Features
Working Temperature
0 °C to + 55 °C (+32° to +131 °F)
Storage Temperature
-20 °C to + 70 °C (-4° to +158 °F)
Humidity
ESD Protection
90% non condensing
IEC 68-2-32 Test ED
1.8 m (5.9 ft)
16 KV
Protection Class
IP30
Drop Resistance
Mechanical Features
Weight (without cable)
Cable Length
A
Nixdorf Mode A
Ì$+EA1183$-0Î
Optical Features
Sensor
To guarantee single code reading, same code consecutive reading requires the
code to be removed from the reading area (no decoding) before the reader will
accept the same code.
For your convenience, some common Terminators are given below. For other
Header/Terminator selections, Data Format and Advanced Data Format
parameters, see the HHD II Software Configuration Manual.
Ì$+CP0$-$Î
Electrical Features
Successful reading is signaled by an audible tone plus a good-read green spot.
Japanese
* When configuring USB-COM, the relevant files and drivers must be installed from
the USB Device Installation software, which can be downloaded from the web
site http://www.datalogic.com.
Code 128
variable length code; 1-99 characters
Reading Indicators
Ì$+FJ2$-ÊÎ
Ì$+UA02$-4Î
Interleaved 2/5
check digit control and transmission, variable length code; 4-99 characters
Successful scanning is obtained by tilting the scanner with respect to the barcode
to avoid direct reflections, which impair the reading performance (see the figure
above).
Once the reader is correctly inserted into the stand, it is immediately ready to
automatically read any code present in its reading area without pressing the trigger.
Furthermore, a green aiming light is continuously emitted to facilitate the
positioning of the barcode to be read (see the figure above).
Français
USB-COM *
EAN 8/EAN 13 / UPC A/UPC E without ADD ON
check digit transmitted, no conversions
Power Supply
RS-232 interface
Consumption:
Maximum
Operating
Sleep mode/USB Suspend
Max. Scan Rate
Ì$+FJ4$-)Î
Ì$+UA03$-:Î
USB-KBD - ALT-mode
CODE SELECTION
Enabled codes
Heron readers automatically scan barcodes at a distance. Simply aim and pull
the trigger. Code scanning is performed along the center of the light bar emitted
from the reading window. This bar must cover the entire code.
English
USB-KBD
PEN DEFAULT SETTINGS
•
Ì$+FJ3$-$Î
INTERFACE SELECTION
about 160 g (5.6 oz)
2 m (6 ft 6 in)
The stand can be mounted by using self-tapping screws, double sided adhesive
strips or rubber feet:
WEDGE INTERFACE SELECTION
Tab
Wedge IBM AT or PS/2 PCs
A)
B)
Ì$+EA1184$-8Î
Ì$+CP500$-aÎ
C
PC Notebook
Ì$+CP505$-ÈÎ
None
Ì$+EA10$-dÎ
PC Notebook - ALT mode
Ì$+CP508$-2Î
IBM AT - ALT mode
Ì$+CP507$-+Î
C)
Mount the stand directly to the surface using the self-tapping screws;
Carefully clean the bottom surface of the stand and the table surface.
Remove the protective plastic from one side of the adhesive strips and stick
them on the stand bottom. Then, remove the plastic from the other side of the
strips and affix the stand to the table;
Carefully clean the bottom surface of the stand, remove the protective film
from the rubber feet and stick them in the corresponding housing on the
bottom surface. It is also possible to affix an optional metal plate.
INSERTION INTO STAND
OPERATING TEST
Read the TEST code below.
Many other interfaces are supported and can be selected from the HHD II Software
Configuration Manual available online at datalogic.com. Other supported interfaces:
Code 128
USB: USB-IBM-Table Top; USB-KBD-APPLE
WEDGE: IBM XT; IBM SURE1; IBM Terminal 3153; IBM Terminals 31xx, 32xx,
34xx, 37xx; VT220 style Keyboards; Digital Terminal VT2xx/VT3xx/VT4xx; APPLE
ADB Bus
t
e
s
t
Pair the reader to the stand, taking care to insert the handle into the stand clip (see
figure above). Correct insertion will be signaled by a beep; then, the reader will be
ready to read barcodes.
">