advertisement
BT8370-3X3
UNIVERSAL VIDEO WALL STAND
FOR 3x3 VIDEO WALLS
INSTALLATION GUIDE & PARTS LIST
This Pack Contains 1 Stand
PLEASE KEEP THIS FOR FUTURE REFERENCE
FEATURES
• Designed to mount 9 screens in a 3x3 video wall
formation
• Universal stand suitable for video wall screens
from 46" - 60" (117cm - 152cm)
• Max weight per screen: 50kg
• Designed for screens with VESA & non-VESA
mounting patterns: 200 x 200 up to 600 x 400mm
• Suitable for landscape or portrait screen mounting
• Tool-less micro-adjustments at 8 points for seamless
screen alignment
• Stand Dimensions:
W. 3005mm D. 950mm H.2498mm up to 2699mm
• Collar compatible accessories such as shelves
can be fitted directly to the extrusion
• Integrated cable management
• All mounting hardware included
50kg
TM
PER SCREEN
CONTENTS
Installation Safety Notes......................................................................................................................2
Parts List..................................................................................................................... ........................4
Installation Instructions........................................................................................................................7
Optional Accessories........................................................................................................ ................18
Product Dimensions..........................................................................................................................19
B-Tech Contact Details......................................................................................................................20
INSTALLATION TOOLS REQUIRED
Crosshead screwdriver Level Knife
B-TECH AUDIO VIDEO MOUNTS
www.btechavmounts.com
2
INSTALLATION SAFETY INSTRUCTIONS
CAUTION:
This stand is intended for use only with the maximum weights indicated. Use with flat screens heavier than the maximum indicated may result
in instability causing possible injury.
Do not attempt to install this product until all instructions and warnings have been read and properly understood. Please keep these instructions for future reference.
Please check carefully to make sure there are no missing or defective parts - defective parts must never be used.
B-Tech International Limited, its distributors and dealers are not liable or responsible for damage or injury caused by improper installation, improper use or failure to observe these safety instructions. In such cases, all guarantees will expire.
General
Great care must always be taken during installation as most AV equipment is of a fragile nature, possibly heavy and easily damaged if dropped.
If you do not fully understand the instructions or are not sure how to install this product safely, then please consult a professional for advice and/or to install this product for you. Failure to mount this product correctly may cause serious injury or death both during installation and at any time thereafter.
Do not mount any AV equipment that exceeds the specific weight limit of the product you are installing. This weight limit will be clearly stated on each product and its packaging and will vary from product to product.
Product location
Please pay careful attention to where this product is located. Some locations are not suitable for installation.
If located in a public or frequently populated area ensure that the product is out of the immediate
reach of people.
Fixing hardware
It is highly recommended that all fixing screws be used where supplied and that the purpose of all other fixing hardware is fully understood. In some cases more AV equipment fixing hardware will be supplied to accommodate different models of equipment and set up configurations.
The installer must be satisfied that any supplied fixing hardware is suitable for each specific installation. If any fixing screws or included hardware are deemed not sufficient for a safe installation
then please consult a professional or your local hardware store.
Hazard limitation
When routing cables take advantage of any built in cable management features that the product might provide and ensure that all cables are tidy and secure. Check to see that any moving aspect of the product can do so unhindered by any cabling.
Some products have moving parts and the potential to cause injury through the crushing or trapping of fingers or other body parts.
Particular attention to the nature of moving parts is required especially when assembling installing and adjusting during set up.
Immediately after installations double-check that the work done is safe and secure. Double-check all necessary fixings are present and are of ample tightness.
It is recommended that periodic inspections of the product and its fixing points are made as frequently as possible to ensure that safety is maintained. If in doubt consult a professional AV installer or other suitably qualified person.
CS
Spoleþnost B-Tech International Ltd. doporuþuje provést instalaci tohoto produktu prostĜednictvím odborného instalátora AV þi jinak zpĤsobilé osoby. Spoleþnost B-Tech International Ltd, její distributoĜi a prodejci nenesou odpovČdnost za škody nebo zranČní zpĤsobená nevhodnou instalací. Tento výrobek je nutno umístit do vhodné
konstrukce a pouåtvat jen po uvedenou maximální výšku.
DE
B-Tech International Ltd. empfiehlt, dass dieses Produkt durch einen qualifizierten AV-Techniker oder eine andere Person mit geeigneter Qualifikation installiert wird. B-Tech International Ltd, ihre Distributoren und
Händler können nicht für durch fehlerhafte Montage verursachte Beschädigung oder Verletzung haftbar bzw. verantwortlich gemacht werden. Dieses Produkt muss auf eine geeignetem Untergrund montiert werden und darf
nur bis zum angegebenen Höchstgewicht verwendet werden.
ES
B-Tech International Ltd. recomienda que un instalador de audio y video profesional u otra persona debidamente cualificada instalen este producto. B-Tech International Ltd, sus distribuidores y concesionarios no se hacen cargo ni se responsabilizan de ningún daño o lesión provocados por una instalación inapropiada. Este producto se debe montar en una estructura adecuada y se debe utilizar soportando solamente hasta el peso máximo indicado.
FR
B-Tech International Ltd. recommande de confier l’installation de ce produit à un installateur AV professionnel ou
à une autre personne dûment qualifiée. B-Tech International Ltd, ses distributeurs et ses revendeurs ne sauraient être tenus responsables de tout dégât ou de toute blessure résultant d’une installation incorrecte. Ce
produit doit être monté sur un support approprié et utilisé dans la limite du poids maximum indiqué.
IT
B-Tech International Ltd. consiglia di affidare l’installazione di questo prodotto a un installatore specializzato o ad altra persona adeguatamente qualificata. B-Tech International Ltd, i suoi distributori e rivenditori non accettano alcuna responsabilità nei riguardi di eventuali danni o infortuni causati da un’errata installazione. Questo prodotto
deve essere fissato a una struttura idonea e utilizzato unicamente sino al peso massimo indicato.
NL
B-Tech International Ltd. adviseert om dit product te laten installeren door een professionele AV-installateur of andere hiervoor gekwalificeerde persoon. B-Tech International Ltd, haar distributeurs en dealers zijn niet aansprakelijk of verantwoordelijk voor schade of letsel die is veroorzaakt door onoordeelkundige installatie. Dit product moet worden gemonteerd aan een geschikte constructie, waarbij het aangegeven maximum gewicht niet
mag worden overschreden.
PL
Firma B-Tech International Ltd. zaleca, aby ten produkt byá instalowany przez profesjonalnych instalatorów AV lub inny odpowiednio przeszkolony personel. Firma B-Tech International Ltd, jej dystrybutorzy i dealerzy nie ponoszą odpowiedzialnoĞci za uszkodzenia lub obraĪenia ciaáa powstaáe w wyniku nieprawidáowej instalacji.
Niniejszy produkt musi byü zamontowany na odpowiedniej powierzchni, a podczas uĪytkowania nie wolno
przekraczaü podanego maksymalnego obciąĪenia.
PT
A B-Tech International Ltd. recomenda que a instalação deste produto seja efectuada por um instalador de AV profissional ou outra pessoa devidamente habilitada. A B-Tech International Ltd. e os seus distribuidores e concessionários não são responsáveis por danos ou lesões causados por uma instalação incorrecta. Este
produto tem de ser montado numa estrutura adequada e utilizado somente até ao peso máximo indicado.
RU
Ʉɨɦɩɚɧɢɹ B-Tech International Ltd. ɪɟɤɨɦɟɧɞɭɟɬ, ɱɬɨɛɵ ɭɫɬɚɧɨɜɤɚ ɞɚɧɧɨɝɨ ɢɡɞɟɥɢɹ ɩɪɨɢɡɜɨɞɢɥɚɫɶ ɢɧɠɟɧɟɪɨɦ ɩɨ ɭɫɬɚɧɨɜɤɟ ɚɭɞɢɨ-ɜɢɞɟɨɬɟɯɧɢɤɢ ɢɥɢ ɞɪɭɝɢɦ ɫɩɟɰɢɚɥɢɫɬɨɦ ɫ ɫɨɨɬɜɟɬɫɬɜɭɸɳɟɣ ɤɜɚɥɢɮɢɤɚɰɢɟɣ. Ʉɨɦɩɚɧɢɹ B-Tech International Ltd., ɟɟ ɞɢɫɬɪɢɛɶɸɬɨɪɵ ɢ ɞɢɥɟɪɵ ɧɟ ɧɟɫɭɬ ɨɬɜɟɬɫɬɜɟɧɧɨɫɬɢ ɡɚ ɩɨɜɪɟɠɞɟɧɢɹ ɢɥɢ ɬɪɚɜɦɵ, ɩɨɥɭɱɟɧɧɵɟ ɜ ɪɟɡɭɥɶɬɚɬɟ ɧɟɩɪɚɜɢɥɶɧɨɣ ɭɫɬɚɧɨɜɤɢ. Ⱦɚɧɧɨɟ ɢɡɞɟɥɢɟ ɞɨɥɠɧɨ
.
.
AV
-
.
-
3
4
BT8370-3X3
PARTS LIST
D
MOUNTING RAIL
BT8390-150 (x6) E
JOINING BARS
BT8390-EXT (x3)
B
COLUMN
B1
D1
D2
E1
B4
E2
BT8380-240 (x3)
B2
B3
C
JOINING PLATE
BT8380-JPK (x9)
C1
E3
Optional - To fix shelves to a vertical column
B5 B6
C2
C4
C3
C5
A BASE
BT8380-BASE (x3)
A1
A5
A2
A3 A4
A6 A7
F
G
H
SPACER
G1
BT8390-VESA400MAF (x9)
A
D
H
E
I
BT8390-SP (x1)
INTERFACE ARMS
SCREEN FIXING KIT
B
G
F1
G2
C
F
J
ADAPTOR ARMS BT7564 (x9)
For use with 55" screens with 600 x 400mm VESA fixings
H1 H2
PLEASE KEEP THIS FOR FUTURE REFERENCE
J
I
G
H
D
E
F
A
B
C
REF
G1
G2
REF
REF
C1
C2
C3
C4
C5
REF
B1
B2
B3
B4
B5
B6
BASE
REF
PART NAME
A1
A2
A3
A4
BASE
SUPPORT STEM
M8 x 90mm SCREW
M8 WASHER
LEVELLING FOOT
A5
A6 6AF HEX KEY
A7
24mm SPANNER
COLUMN
PART NAME
VERTICAL COLUMN
PLASTIC SLOT INSERT
CABLE COVER
END CAP
M8 SLIDING NUT
M8 x 16mm SCREW
JOINING KIT
PART NAME
JOINING PLATE
M8 SLIDING NUT
M8 x 12mm SCREW
M8 x 16mm SCREW
5AF HEX KEY
REF
D1
D2
MOUNTING RAIL
PART NAME
MOUNTING RAIL
END CAP
REF
E1
E2
E3
REF
F1
REF
H1
H2
EXTENSION KIT
PART NAME
JOINING BAR
M6 x 8mm GRUB SCREW
3AF HEX KEY
SPACER
SPACER
PART NAME
INTERFACE KIT
PART NAME
INTERFACE ARM - RIGHT
INTERFACE ARM - LEFT
SCREEN FIXING KIT
M6 x 16mm SCREW
M6 x 25mm SCREW
M6 x 40mm SCREW
M8 x 16mm SCREW
M8 x 25mm SCREW
M8 x 40mm SCREW
M6 WASHER
5mm SPACER
13mm SPACER
24mm SPACER
ADAPTOR ARMS
PART NAME
600mm ADAPTOR ARMS
M6 x 16mm SCREW
18
72
3
TOTAL
QTY
9
72
36
36
9
TOTAL
QTY
3
3
12
6
6
3
3
3
6
6
TOTAL
QTY
3
12
12
TOTAL
QTY
6
12
TOTAL
QTY
1
TOTAL
QTY
9
9
TOTAL
QTY
36
36
36
36
36
36
36
36
36
36
TOTAL
QTY
18
36
5
INSTALLATION NOTES
• Min. two person assembly
• Approx. minimum floor space required for assembly: 5m
2
• Floor fixing kit available BT8380-FBK - see page 18
• Castors available separately BT8380-CASTORS
6
FLOORSTAND STABILITY
• Install stand on level ground
When verifying the stability of the structure, consider the following external factors:
1. The strength of the floor.
2. Exposure to sudden and severe wind.
3. Danger arising from contact with people and / or objects. (eg installations in passageways,
emergency exits).
SCREEN MOUNTING POSITION
Landscape / Horizontal Display
Portrait / Vertical Display
TOP
TOP
BOTTOM
BOTTOM
1 cont...
Attach Joining Plate to Column
ii. Lay column (part B1) on the floor and slide three joining plates (part C1)
onto each column.
C1
B1
TOP
8
IMPORTANT:
Make sure the end with M8 threads are on the bottom of the Vertical Column
BOTTOM
iii. Use the spacer (part F1) to set distance between the each joining plate (part C1) on the
column (part B1) according to the screen size. Once set, tighten all M8 x 16mm screws
(part C4) on joining plate with hex key (part C5).
F1
D1
F1
ADJUSTMENT
KNOB
NOTE:
Leave at least a 5mm gap at top of column for the end cap
(part B4)
B1
C1
C4 C5
C1
9
2
Combine 2 Mounting Rails together using the BT8390-EXT
i. On the intended front facing side of the mounting rail (part D1) insert 4 x joining
bars (part E1) half-way into each slot, on the back side insert 1 x joining bar into
the top slot and 1 x joining bar into the third slot (See fig.1). Loosely fasten the
2 grub screws (part E2) on each joining bar fixing it to the mounting rail.
ii. Slide another mounting rail (part D1) onto the joining
bars and tighten all the grub screws, combining the rails
securely. Repeat procedure for the other 4 rails.
D1
Fig 1.
GRUB
SCREW
D1
E1
BACK
JOINING
BAR
FRONT
E1
D1
E3
FRONT
E2
3 x Combined Rails
10
3
Insert Sliding Nuts
On the back side of each of the combined mounting rails, insert the M8 sliding nuts (part C2) into either end, 3 in the bottom slot and 3 in the second from top slot. 1 x M8 sliding nut in each slot should be positioned near the centre of the rails, the remaining 4 near the end of rail.
BACK
D1 D1
D1
D1
C2
BACK
C2
E1
BACK
C2
3
Attach Columns to Mounting Rails
On the floor, lay the columns (part B1) equal distance apart on the mounting rails (part D1) so the joining plates are face down.
Attach the mounting rails (part D1) to the columns (part B1) by using the joining plates (part C1) and fastening M8 x 12mm screws (part C3) into the inserted
M8 sliding nuts (part C2).
Note: The distance between the columns should be approx. 1000mm - 1300mm
CORRECT
WRONG
Assemble as shown
D1
X
D1
BACK
C1
C2
C3
1000mm - 1300mm
1000mm - 1300mm
B1
C5
C3
C1
B1
D1
D1
11
4
Assemble Bases to Columns
On the floor and attach the bases (part A1) to the columns (part B1) using the support stems (part A2), M8 x 90mm screws (part A3) and washers (part A4).
Once bases are fixed, return stand to upright position.
FRONT
IMPORTANT:
If mounting a shelf, insert the M8 sliding nuts before attaching base to column.
A4
A3
B1
THREADED
A1
A6
A5
A7
12
If necessary use the 24mm spanner (part A7) to adjust levelling feet (part A5).
A2
5
Attach Interface Arms to Screen
Attach the interface arms (parts G1 and G2) to the back of the screen using the screen fixing kit (parts A-F).
INTERFACE ARM LEFT
A B C
D E F
G
INTERFACE ARM RIGHT
G1
SCREEN BACK
Use spacers for screens with recessed fixings
H I J
Use adaptor arms (part H1) for 55" screens
with VESA 600 x 400mm fixings
H1
G2
H2
H1
G1
SCREEN
FIXING
KIT
13
14
6
Hook the Screens onto the Stand
i. Hook the first screen centrally onto the bottom rail and align screen with the
horizontal centre of the stand. ii. Using a level, align the flat screen to the floor using the Z axis adjustment knobs.
iii. Use the Y axis knobs to ensure flat screen is perpendicular with the floor.
G1
Y AXIS
KNOB
Z AXIS
KNOB
B1
D1
Y AXIS
KNOB
OPTIONAL ACCESSORIES
AV Component Shelfs
Insert 2 x M8 sliding nuts (parts B5) into the column (part B1) front slots before attaching base to stand.
Mount a B-Tech Shelf (BT7032 /
BT7172 / BT7172 / BT7173) by fastening the M8 x 16mm screws (part B6) to the
M8 sliding nuts.
18
Floor Fixing Kit
BT8380-FBK (x3)
Using suitable fixings and floor anchors, attach a floor fixing bracket to the front and back of each base (part A1).
CONCRETE FLOOR
BT8370-3X3
PRODUCT DIMENSIONS
3005mm
1500mm 1500mm
404mm
97.5mm
1000 - 1300mm
950mm
THESE INSTRUCTIONS ARE INTENDED AS A GUIDE ONLY AND B-TECH ACCEPTS NO
LIABILITY FOR THE ACCURACY OF THE INFORMATION CONTAINED IN THIS DOCUMENT.
19
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement