ACM1252U-Z2
Small NFC Module Reader
Technical Specifications V1.01
Subject to change without prior notice
[email protected]
www.acs.com.hk
Table of Contents
1.0.
Introduction ............................................................................................................. 3
2.0.
Features ................................................................................................................... 4
3.0.
Typical Applications................................................................................................ 5
4.0.
Technical Specifications ......................................................................................... 6
Page 2 of 7
ACM1252U-Z2 – Technical Specifications
Version 1.01
[email protected]
www.acs.com.hk
1.0. Introduction
The ACM1252U-Z2 is an NFC reader module developed based on the 13.56 MHz
contactless technology. This NFC Reader Module supports all three NFC modes
namely card reader/writer, card emulation, and peer-to-peer communication.
The ACM1252U-Z2 supports ISO 14443 Type A and B cards, MIFARE®, FeliCa,
and ISO 18092–compliant NFC tags. It also supports other NFC devices with an
access speed of up to 424 Kbps and proximity operating distance of up to 30 mm
(depending on tag type used).
It is PC/SC-compliant for interoperability across different applications and platforms
and provides high-speed communication ability for contactless cards and NFC
tags/devices. Post-deployment firmware upgrade is also supported, eliminating the
need for additional hardware modification.
Page 3 of 7
ACM1252U-Z2 – Technical Specifications
Version 1.01
[email protected]
www.acs.com.hk
2.0. Features
●
USB Full Speed Interface
●
CCID-compliant
●
Smart Card Reader:
o
●
Read/Write speed of up to 424 Kbps
Built-in antenna for contactless tag access, with card reading distance of up to 30 mm
(depending on tag type)
Supports ISO 14443 Part 4 Type A and B cards, MIFARE Classic®, FeliCa, and all
four types of NFC (ISO/IEC 18092 tags)
Built-in anti-collision feature (only one tag is accessed at any time)
NFC Support:
Card Reader/Writer mode
Peer-to-Peer mode
Card Emulation mode
User-controllable bi-color LED
Application Programming Interface:
o
1
Built-in Peripheral:
o
●
Contactless Interface:
Supports PC/SC
●
USB Firmware Upgradability
●
Supports Android™ 3.1 and later 1
●
Compliant with the following standards:
o
ISO 14443
o
ISO 18092
o
USB Full Speed
o
PC/SC
o
CCID
o
CE
o
FCC
o
RoHS 2
o
REACH
o
Microsoft® WHQL
Uses an ACS-defined Android Library
Page 4 of 7
ACM1252U-Z2 – Technical Specifications
Version 1.01
[email protected]
www.acs.com.hk
3.0. Typical Applications
•
e-Government
•
e-Banking and e-Payment
•
e-Healthcare
•
Transportation
•
Network Security
•
Access Control
•
Loyalty Program
Page 5 of 7
ACM1252U-Z2 – Technical Specifications
Version 1.01
[email protected]
www.acs.com.hk
4.0. Technical Specifications
Physical Characteristics
Dimensions .................................... 52.0 mm (L) × 20.0 mm (W) × 6.0 mm (H)
Weight ............................................ 3.7 g
USB Host Interface
Protocol .......................................... USB CCID
Connector Type.............................. Micro USB
Power Source................................. From USB port
Speed............................................. USB Full Speed (12 Mbps)
Supply Voltage ............................... 5 V
Supply Current .............................. 200 mA
Cable Length .................................. 1.0 m, Detachable (Optional)
Contactless Smart Card Interface
Standard ........................................ ISO/IEC 18092 (NFC), ISO 14443 Type A & B Parts 1-4, MIFARE, FeliCa
Protocol .......................................... ISO 14443 T=CL for ISO14443-4 compliant cards
....................................................... T=CL Emulation for MIFARE Classic, ISO 18092, FeliCa and NFC tags
Operating Frequency ..................... 13.56 MHz
Operating Distance ........................ Up to 30 mm (depending on card type)
Smart Card Read/Write Speed....... 106 Kbps, 212 Kbps, 424 Kbps
Antenna Size ................................. 20 mm × 22 mm
Built-in Peripheral
LED ................................................ 1 bi-color: Red and Green
Other Feature
Firmware Upgrade ......................... Supported
Application Programming Interface
PC-linked Mode.............................. PC/SC
Operating Conditions
Temperature................................... 0 °C – 50 °C
Humidity ......................................... Max. 90% (non-condensing)
MTBF ............................................. 500,000 hrs
Certifications/Compliance
ISO 14443, ISO 18092, USB Full Speed, PC/SC, CCID, CE, FCC, RoHS 2, REACH, Microsoft® WHQL
Page 6 of 7
ACM1252U-Z2 – Technical Specifications
Version 1.01
[email protected]
www.acs.com.hk
Device Driver Operating System Support
Windows® 2000, Windows® XP, Windows Vista®, Windows® 7, Windows® 8, Windows® 8.1, Windows® 10
Windows® Server 2003, Windows® Server 2008, Windows® Server 2008 R2, Windows® Server 2012,
Windows® Server 2012 R2
Linux®, Mac OS®, Android™ 3.1 and later
Android is a trademark of Google Inc.
Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries.
Mac OS is a trademark of Apple Inc., registered in the U.S. and other countries.
Microsoft, Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and/or other countries.
MIFARE and MIFARE Classic are registered trademarks of NXP B.V. and are used under license.
Page 7 of 7
ACM1252U-Z2 – Technical Specifications
Version 1.01
[email protected]
www.acs.com.hk
">
