advertisement
Call Mute
Press
Press the during a call to mute the call.
again to un-mute the call.
Call Hold and Resume
To place a call on hold:
1. Press the OPTIONS soft key during a call, and select HOLD
To resume a call, do one of the following:
If there is only a call on hold, press the RESUME soft key.
If there are two calls on hold, press the RESUME soft key to resume the current call, press the
SWAP soft key to swap between the two calls.
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1. Press the OPTION soft key during a call, and select BLIND TRANSFER
2. Enter the number you want to transfer the call to.
3. Press the TRANFER soft key.
Semi-Attended Transfer
1. Press the OPTION soft key during a call, and select TRANSFER
2. Enter the number you want to transfer the call to, and then press
3. Press the TRANSFER soft key to dial out.
4. Press the TRANSFER soft key when you hear the ring-back tone.
Attended Transfer
1. Press the TRANSFER soft key during a call, and select TRANSFER.
2. Enter the number you want to transfer the call to.
3. Press the TRANSFER soft key to dial out.
4. Press the TRANSFER soft key after the call is answered
Call Forward
To enable call forward feature on a specific line:
1. Press the OK key to enter the main menu, and select CALL FEATURES CALL FORWARD.
2. Press
<
< or
< to highlight the desired line, and press the OK soft key.
3. Press or to highlight the desired forwarding type, and press the OK soft key.
<
Always---Incoming calls are all forwarded immediately.
Busy---Incoming calls are forwarded when handset is busy.
No answer---Incoming calls are forwarded if not answered after a period of time.
4. Select ENABLED from the STATUS field.
3. Enter the number you want to forward the incoming calls to in the TARGET field.
4. Press < or < to select the desired ring time to wait before forwarding (only for No Answer Forward) in the AFTER RIGHT TIME field.
4. Press the SAVE soft key to accept the change.
Telrad Futuro SIP
Cordless Phone
Quick Reference Guide www.telradinternational.com
Soft Keys
Speakerphone
Answer Call
Menu Button
Keypad
Silent Mode
Voicemail
Navigational Keys
Power/End Call
Lock/Unlock Keypad
Mute/Unmute
BASIC OPERATIONS
Turning Handset On/Off
To turn the handset on, do one of the following:
Long press until the LCD screen lights up.
Place the handset in the charger cradle. The handset will be turned on automatically.
To turn the handset off:
Long press again to turn the handset off
Locking/Unlocking Keypad
Long press
Long press
#
# to lock the keypad again to unlock the keypad
Switching Silent Mode On/Off
Long press
Long press
*
* to switch the silent mode on again to switch the silent mode off.
HANDSET SETTINGS
Handset Name
To rename the handset:
1. Press the OK key to enter the main menu, and select SETTINGS HANDSET NAME.
2. Edit the current value in the RENAME field.
3. Press the SAVE soft key to accept the change.
Volume Adjust
Press <
< or <
< during a call to adjust the volume of the currently used audio device.
Press or when the handset is idle to adjust the ringer volume.
Ring Tones
1. Press the OK key to enter the main menu, and select SETTINGS AUDIO RING TONES MELODIES.
2. Press <
< or
<
< to highlight the INTERCOM CALL option or the desired line.
3. Press or to select the desired ring tone.
4. Press the SAVE soft key to accept the change.
Local Directory
To add a contact:
1. Press the OK key to enter the main menu, and select DIRECTORY
2. Press the OPTION soft key, and select NEW CONTACT.
3. Enter the desired values in the NAME, NUMBER AND MOBILE fields.
4. Press the SAVE soft key to accept the change.
To edit a contact:
1. Press the OK key to enter the main menu, and select DIRECTORY
2. Press < or
< to highlight the desired entry.
3. Press the OPTION soft key, and select EDIT.
4. Edit the values in the NAME, NUMBER and MOBILE fields.
5. Press the SAVE soft key to accept the change.
To delete a contact:
1. Press the OK key to enter the main menu, and select DIRECTORY
2. Press < or
< to highlight the desired entry.
3. Press the OPTION soft key, and select DELETE to delete the selected entry.
To assign a speed dial number:
1. Press the OK key to enter the main menu, and select SETTINGS TELEPHONY SPEED DIAL.
2. Press
3. Press
<
< or or
<
< to highlight the desired speed dial key, and press the ASSIGN soft key.
to highlight the desired entry, and press the OK soft key.
If both the office number and mobile number are stored, press (Up) or (down) to highlight the desired number, and press the OK soft key again.
BASIC CALL FEATURES
Placing Calls
To place a call directly:
Enter the desired number when the handset is idle, and press
To place a call from the local directory:
1. Press
2. Press <
< when the handset is idle.
or
< to highlight the desired entry, and press .
If both the office number and mobile number are stored, press < or
< to highlight the desired number, and press the again.
To place a call from the call history:
1. Press the HISTORY soft key, and select the desired call history list.
2. Press < or
< to highlight the desired entry, and press .
To place a call from the redial number list:
1. Press when the handset is idle.
2. Press < or
< to highlight the desired entry, and press .
To place a call using the speed dial key:
Long press the speed dial key to place a call to the number assigned to it.
Answering Calls
To answer a call, do one of the following:
Press the ACCEPT soft key
Press
Press
NOTE: You can ignore an incoming call by pressing the SILENCE soft key or reject an incoming call by pressing
Ending Calls
Press
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement