advertisement
SPECIFICATIONS
W he n o rde
Quic red w
Eligi
ith
QS kSh
AL
L "
Q
S" op ip tion s
LIGHTPLANE 2 UP + UNDER
LP2UU | Suspended, Wall
Find additional images and information at alwusa.com/lp2uu
LIGHTPLANE 2 UP + UNDER – LP2UU
Suspended, Wall
1. BASE MODEL LP2UUS
LP2UUW
QS Suspended, direct/indirect
QS Wall, direct/indirect
SPECIFICATIONS
Page 2 of 6
Type:
2. RUN LENGTH/
SIZE
___
___
3. LAMPING
PRIMARY/
DIRECT
QS Individual (2’, 3’, 4’, 5', 6’, 7’ or 8’)
QS Continuous row or Configuration 1 (enter total linear length, ex: 20’)
1 A configuration is a custom shape (rectangle square, L, etc.) with mitered corners.
Must choose quantity of mitered corners in Additional Options.
All lengths are nominal and may vary based on lamping and other specfication selections. Consult factory when exact lengths are required.
LED 2
LOW 3 QS Low-output, high-performance LED – 619 delivered lm/ft, 7.1 W/lf, 87 lm/W
2700K QS 3000K QS 3500K QS 4000K
MED 3
HI 3,4
TUNE 5,7
QS Medium-output, high performance LED – 844 delivered lm/ft, 10.1 W/lf, 84 lm/W
2700K QS 3000K QS 3500K QS 4000K
QS High-output, high-performance LED – 1144 delivered lm/ft, 14.4 W/lf, 79 lm/W
2700K QS 3000K QS 3500K QS 4000K
Tunable white LED, 2700K-5700K – 651 delivered lumens, 8 W/lf, 81 lm/W
DECOR 6
RGB 7
RGB/W 7
Decorative constant voltage LED, 286 delivered lm/ft, 5.9 W/lf, 48 lm/W
3000K 3500K 4000K
Color-changing RGB LED, 5 W/lf
Color-changing RGB plus White LED, 5 W/lf
2 Limitations may apply accomodating requests for exact, non-standard overall run lengths (ex: 3' 9"). Consult factory.
3 Performance calculations derived directly from IES test results at 3500K
4 HI may be specified for Direct or Indirect lamping, but CANNOT be used in both channels
5 Performance calculations are extrapolated MAXIMUM estimates for mid-range CCTs.
Cooler and warmer CCT settings will yield lower lumens, lower lm/W and higher W/lf.
6 Performance calculations are extrapolated estimates
7 DMX driver recommend; controller not included
FLUORESCENT
1T5
1T5HO
1T5S
1T5HOS
Lamps not provided
Standard output, 1-lamp profile T5
High output, 1-lamp profile T5
Standard output, 1-lamp profile T5, staggered
High output, 1-lamp profile T5, staggered
QS = QuickShip-qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the configuration must be ones notated with "QS". NOTE: Maximum 800 ft. of QuickShip-eligible product per order.
© 2017 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website .
A 1035 22nd Avenue, Unit 1 n
Oakland, CA 94606 P 510 n
489 n
2530 E TalkToUs@alwusa n com W alwusa n com
LIGHTPLANE 2 UP + UNDER – LP2UU
Suspended, Wall
4. DRIVER
PRIMARY
SPECIFICATIONS
LED
0/10V/
DALI
DMX
Page 3 of 6
QS 0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10%
QS 10% Standard dimming to 10% QS 1% Dimming to 1% 0% Premium dimming to 0%
DALI dimming to 0%
DMX dimming to 0%
HILUME/A3 QS Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
FLUORESCENT
STD Standard, non-dimming, <10% THD
FL/0/10V Dimming, 0-10V
HILUME Lutron Hi-Lume® dimming
BALLASTAR Step-dimming
Driver/ballast options may be limited with 347 voltage. Consult factory.
Driver/ballast specifications provided upon request to assist with control system integration. Consult ballast manufacturer for lamp compatibility
EXT/R QS Extra diffuse, reveal 5. LENS
PRIMARY
EXT/R
6. LAMPING
INDIRECT
LED 7
LOW 8
MED 8
HI 8,9
TUNE 10,12
DECOR 11
RGB 12
RGB/W 12
QS Low-output, high-performance LED – 619 delivered lm/ft, 7.1 W/lf, 87 lm/W
2700K QS 3000K QS 3500K QS 4000K
QS Medium-output, high performance LED – 844 delivered lm/ft, 10.1 W/lf, 84 lm/W
2700K QS 3000K QS 3500K QS 4000K
QS High-output, high-performance LED – 1144 delivered lm/ft, 14.4 W/lf, 79 lm/W
2700K QS 3000K QS 3500K QS 4000K
Tunable white LED, 2700K-5700K – 651 delivered lumens, 8 W/lf, 81 lm/W
Decorative constant voltage LED, 286 delivered lm/ft, 5.9 W/lf, 48 lm/W
3000K 3500K 4000K
Color-changing RGB LED, 5 W/lf
Color-changing RGB plus White LED, 5 W/lf
7 Limitations may apply accomodating requests for exact, non-standard overall run lengths (ex: 3' 9"). Consult factory.
8 Performance calculations derived directly from IES test results at 3500K
9 HI may be specified for Direct or Indirect lamping, but CANNOT be used in both channels
10 Performance calculations are extrapolated MAXIMUM estimates for mid-range CCTs.
Cooler and warmer CCT settings will yield lower lumens, lower lm/W and higher W/lf.
11 Performance calculations are extrapolated estimates
12 DMX driver recommend; controller not included
QS = QuickShip-qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the configuration must be ones notated with "QS". NOTE: Maximum 800 ft. of QuickShip-eligible product per order.
© 2017 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website .
A 1035 22nd Avenue, Unit 1 n
Oakland, CA 94606 P 510 n
489 n
2530 E TalkToUs@alwusa n com W alwusa n com
LIGHTPLANE 2 UP + UNDER – LP2UU
Suspended, Wall
7. DRIVER
INDIRECT
FLUORESCENT
1T5
1T5HO
1T5S 13
1T5HOS 13
SPECIFICATIONS
Page 4 of 6
Lamps not provided
Standard output, 1-lamp profile T5
High output, 1-lamp profile T5
Standard output, 1-lamp profile T5, staggered
High output, 1-lamp profile T5, staggered
13 For staggered lamping, EXT lens is recommended for maximum diffusion properties
LED
0/10V/
DALI
DMX
QS 0-10V dimming (Pair driver with dimming % below, ex: 0/10V/10%
QS 10% Standard dimming to 10% QS 1% Dimming to 1% 0% Premium dimming to 0%
DALI dimming to 0%
DMX dimming to 0%
HILUME/A3 QS Lutron Hi-Lume® A L3D EcoSystem® or three-wire control, dimming to 1%
FLUORESCENT
STD
FL/0/10V
HILUME
Standard, non-dimming, <10% THD
Dimming, 0-10V
Lutron Hi-Lume® dimming
BALLASTAR Step-dimming
Driver/ballast options may be limited with 347 voltage. Consult factory.
Driver/ballast specifications provided upon request to assist with control system integration. Consult ballast manufacturer for lamp compatibility
8. LENS
INDIRECT
EXT/R
EXT/R QS Extra diffuse, reveal
9. FINISH
10. VOLTAGE
AL
BK
WH
WH/AM
RAL/ ___
QS Standard, natural “Ultimatte” aluminum
QS Black powdercoat
QS White powdercoat
White antimicrobial powdercoat for healthcare environments
Specify RAL powdercoat code (ex: #RAL/3003)
120
277
UNV
347 14
120 volt
277 volt
QS Universal voltage
347 volt
14 Driver/ballast options may be limited with 347 voltage. Consult factory.
QS = QuickShip-qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the configuration must be ones notated with "QS". NOTE: Maximum 800 ft. of QuickShip-eligible product per order.
© 2017 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website .
A 1035 22nd Avenue, Unit 1 n
Oakland, CA 94606 P 510 n
489 n
2530 E TalkToUs@alwusa n com W alwusa n com
LIGHTPLANE 2 UP + UNDER – LP2UU
Suspended, Wall
11. ADDITIONAL
OPTIONS
SPECIFICATIONS
Page 5 of 6
NONE
COMBO
QS None
QS Combination 4.5" canopies at feed locations with both power feed and suspension mounting hardware
EMC/___ 16 QS Emergency circuit (indicate total quantity, ex: EMC/4)
EMB/___ 16 QS Emergency battery pack (indicate total quantity, ex: EMB/4)
ENLGHT/__ 17,18,19 QS Embedded, Enlighted ® 0-10V smart sensor (occupancy, daylight, networking and more)
OS/___ 18,19 Remoted, 0-10V occupancy sensor (indicate total quantity, ex: OS/4)
PH/___ 18,19 Remoted, 0-10V remoted photocell/daylight sensor (indicate total quantity, ex: PH/4)
MC/___
SB
QS* Mitered corners (indicate total quantity, ex: MC/4 for a rectangle)
Seismic bracing
16 Consult factory for available options
17 Enlighted Gateway and Energy Manager (by others) plus programming required.
Learn more at enlightedinc.com.
18 Compatible with 0-10V driver only. Contact factory for alternative options.
19 Select quantity of 1 for every 8 ft. (ex: ENLGHT3 for a 24' fixture run; OS4 for a 32' fixture run)
*45˚ mitered cuts forming 90˚ corners only for QuickShip qualification
QS = QuickShip-qualifying option. For the entire luminaire configuration to be QuickShip-eligible, ALL options specified in the configuration must be ones notated with "QS". NOTE: Maximum 800 ft. of QuickShip-eligible product per order.
DIMENSIONS/MOUNTING
5
3
8
"
2
1
4
"
LP2UUS -SUSPENDED
5
3
8
"
2
1
4
"
LP2UUW - WALL
© 2017 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website .
A 1035 22nd Avenue, Unit 1 n
Oakland, CA 94606 P 510 n
489 n
2530 E TalkToUs@alwusa n com W alwusa n com
LIGHTPLANE 2 UP + UNDER – LP2UU
Suspended, Wall
HOUSING
100% recyclable, extruded architectural grade
T6061 aluminum with .08" minimum wall thickness.
ELECTRICAL
Fluorescent ballasts are <10% THD Class P.
Programmed-start standard. LED drivers are
Class 2. L 80 >50,000 hours. 80+ CRI. Luminous flux
+/- 5%. ETL listed for damp location with lens.
EMERGENCY
Luminaires can be wired for emergency circuit and/or emergency battery backup. Consult factory for details.
SUSPENSION HARDWARE
SPECIFICATIONS
Page 6 of 6
LINEAR LENS OPTIONS
Extruded, twin-layered, high-impact acrylic. EXT is white and extra diffuse with minimal-to-no source visibility. WD is lightly frosted with greater light output, but possible source visibility.
REVEAL LENS – EXT/R, WD/R
FINISH
Standard finish is "Ultimatte" aluminum — a smooth, clean and durable finish achieved from a deep-etch and two-step clear anodizing process. White, black and color RAL powdercoat options also available.
CEILING HARDWARE
(1) 4.5" canopy per power feed location,
(1) bullet mount, (1) 8' aircraft cable and (1)
2" canopy (for use with
T-bar mounting) per suspension point
COMBO CANOPY
Choose option
COMBO to specfiy
4.5" canopies at feed locations with power feed and aircraft cable suspension mounting
Canopy finish is always white.
Contact factory for alternate color.
ALUMINUM – AL WHITE – WH
OPTIONS
Eye Bolt
(By Others)
Gripper w/Hook 2-Cable
Clamp
BLACK – BK COLOR – RAL
Aircraft
Cable
SEISMIC BRACING
Add-on hardward includes cable gripper with hook, 2-cable clamp and specified length of aircraft cable per suspension point
MITERED CORNERS
Consult factory for mitered corner angle options
OPERATING TEMPERATURE
Luminaire should be installed and operated ONLY in environments where the ambient temperature ranges from -4˚ F (-20˚ C) to 122˚ F (50˚ C). Operating the luminaire in environments outside the listed temperature range voids the warranty AND may damage the product or adversely impact lamp life, lumen output and color consistency.
© 2017 Architectural Lighting Works. Specifications subject to change without notice. Limited warranty. Complete terms available on website .
A 1035 22nd Avenue, Unit 1 n
Oakland, CA 94606 P 510 n
489 n
2530 E TalkToUs@alwusa n com W alwusa n com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project