General International | 75-510M1 | GENERAL INTERNATIONAL CATALOG 1-2017 | General International 75-155M1 Malay

General International 75-155M1 Malay
www.general.ca
WOODWORKING & METALWORKING
MACHINERY 2017
GIU GIPPU 2017 CATALOG
2014-07-15 9:48 AM
#75­010 M1 │ 12" variable speed drill press
General International │General / General International + Metalworking product
#75­010 │ 12" variable speed drill press
Features
Forced opening line interrupter
switch, requires machine restart
in case of power failure or circuit
interruption.
Adjustable spindle tension return
spring.
Built­in laser pointer.
Sturdy design with cast­iron
head, base, and table.
High­quality bearings for smooth,
vibration­free operation.
Simple hand lever controlled
mechanical variable speed from
500 to 3000 rpm.
Digital spindle speed display.
1/3 HP industrial­quality, 120 V
motor.
Equipped with easy to adjust
dual depth stop for complete
control of both down stroke
depth and upstroke travel.
5/8″ chuck with key & convenient
onboard chuck key holder.
Easy to use see­through flip­up
chuck guard included.
Crank­operated rack and pinion
table height adjustment.
Optional accessories
22 piece drill set 1/16" to 3/8"
(#70­020).
9" auger drill bit set (#70­105).
Chuck guard (#70­115A).
Self­centering pen drilling vise
(#70­120).
Drill press tool tray (#70­125).
Chuck guard (#70­155).
Swing
Drilling capacity Chuck size
Spindle travel
Spindle distance to table Spindle distance to base Table size
Column diameter Spindle speeds
Spindle
Overall height
Base size
Motor
Weight
12’’ (305 mm)
5/8” (16 mm)
5/8” (16 mm)
3 1/8” (80 mm)
15” (380 mm)
21 7/8” (556 mm)
9 1/2" x 9 1/2" (240 x 240 mm) 2 1/2” (65 mm)
(variable) 500 to 3000 rpm MT2
33” (840 mm)
15” x 9 5/8” (380 x 245 mm) 1/3 HP, 120 V, 3.1 A
75 lbs (34 kg)
11/20/2016
#75­155 M1 │ 15" variable speed drill press
General International │General / General International + Metalworking product
Features
#75­155 │ 15" variable speed drill press
Adjustable spindle tension return
spring.
Built­in laser pointer.
Sturdy design with cast­iron
head, base, and table.
High­quality bearings for smooth,
vibration­free operation.
Simple hand lever controlled
mechanical variable speed from
280 to 2100 rpm.
Digital spindle speed display.
Industrial­quality 120 V motor.
Chuck with key.
Easy to use see­through flip­up
chuck guard included.
Crank­operated rack and pinion
table height adjustment.
Optional accessories
22 piece drill set 1/16" to 3/8"
(#70­020).
9" auger drill bit set (#70­105).
Chuck guard (#70­115A).
Self­centering pen drilling vise
(#70­120).
Drill press tool tray (#70­125).
Chuck guard (#70­155).
Swing
Drilling capacity
Chuck size
Spindle travel
Spindle distance to table
Spindle distance to base
Table size (diameter)
Column diameter
Spindle speeds
Spindle
Overall height
Base size
Motor
Weight
Copyright © 2014 GENERAL INTERNATIONAL
15’’ (390 mm)
3/4” (20 mm)
5/8” (16 mm)
3 1/8” (80 mm)
29 3/8” (745 mm)
48 1/2” (1230 mm)
12 3/8" (315 mm)
2 3/4” (70 mm)
(variable) 280 to 2100 rpm
MT2
63 3/8” (1610 mm)
17” x 10 1/2” (430 x 265 mm)
1/2 HP, 120 V, 5 A
136 lbs (62 kg)
10/3/2016
#75­510 M1 │ 20" variable speed drill press
General International │General / General International + Metalworking product
Features
#75­510 │ 20" variable speed drill press
Adjustable spindle tension return
spring.
Built­in laser pointer.
Sturdy design with cast­iron
head, base, and table.
High­quality bearings for smooth,
vibration­free operation.
Simple hand lever controlled
mechanical variable speed from
280 to 2100 rpm.
Digital spindle speed display.
Industrial­quality 120 V motor.
Chuck with key.
Easy to use see­through flip­up
chuck guard included.
Crank­operated rack and pinion
table height adjustment.
Optional accessories
22 piece drill set 1/16" to 3/8"
(#70­020).
9" auger drill bit set (#70­105).
Chuck guard (#70­115A).
Self­centering pen drilling vise
(#70­120).
Drill press tool tray (#70­125).
Chuck guard (#70­155).
Swing
Drilling capacity
Chuck size
Spindle travel
Spindle distance to table
Spindle distance to base
Table size
Column diameter
Spindle speeds
Spindle
Overall height
Base size
Motor
Weight
► Line interrupter switch.
Copyright © 2014 GENERAL INTERNATIONAL
20’’ (515 mm)
1 1/4” (32 mm)
3/4” (20 mm)
4 3/4” (120 mm)
27 3/4” (705 mm)
46 7/8” (1190 mm)
18 3/4" x 16 3/4" (475 x 425 mm)
3 5/8” (92 mm)
(variable) 280 to 2100 rpm
MT3
67” (1700 mm)
23 5/8” x 15 3/4” (600 x 400 mm)
1 HP, 120 V, 10 A
284 lbs (129 kg)
1/9/2017
#10­055 M1 │ 3/4 HP dust collector
General International │General / General International product
Features
#10­055 │ 3/4 HP dust collector
Industrial­duty motor designed
for continuous use.
Heavy­duty steel construction,
mounted on four swivel casters
for total mobility and stability.
Safety lock­out switch with
removable key to prevent
unauthorized use.
Precision spin­balanced impeller
for smooth operation and
minimal noise.
Reusable clear plastic collector
bag.
Washable, extra­fine 5 micron
filter bag.
Quick­release bags clamps with
metal straps.
Hole in base allows floor
sweeping use in the shop.
Inlet diameter
Airflow capacity
Blower wheel diameter
Sound rating
Bag opening diameter
Bag capacity
Static pressure (without bag)
Overall dimensions (l x w x h)
Motor
Weight
Optional accessories
2 micron filter bag (#10­015).
Clear plastic collector bag (#10­016).
4" x 2 1/2" reducer (#10­072).
4" x 2 1/2" reducer (#10­073).
4" x 2 1/2" reducer (#10­074).
Dust hood 8 1/4" x 8 1/4" x 4"
(#10­076).
Dust hood 10 1/4" x 8 1/2" x 4"
(#10­077).
Floor sweeps (#10­078).
4" blast gate (#10­080).
Universal dust hood (#10­081).
4" T­fitting (#10­082).
4" Y­fitting (#10­083).
4" elbsow (#10­084).
4" splice (#10­085).
4" x 2 1/2" reducer (#10­086).
4" x 10" dust hood (#10­087).
4" cap (#10­088).
4" hose clamp (#10­089).
Bag clamp (#10­092).
Accessory kit for dust collector ­ 1
machine hook­up (#10­100).
Window type collector bag (#10­125).
4" x 50" polyethylene flexible
hose (#10­130).
4" x 50" grey flexible hose
(#10­130G).
Remote control (#10­150R).
4" x 10" polyethylene flexible
hose (#10­410).
(1) 4” (100 mm)
441 cfm
9” (230 mm)
90 dB
12 5/8” (320 mm)
17 gallon (65 l)
5 3/4” of water
32 5/8" x 17 3/4" x 61" (830 x 450 x 1550 mm)
3/4 HP, 120 V, 1 Ph, 2.7 A
48 lbs (22 kg)
1/20/2017
#10­005/10­005CF/10­005SCF M1 │ Dust collector ­ 1 HP
General International │General / General International product
Features
#10­005A │ 1 HP dust collector
Totally enclosed, fan cooled,
permanently lubricated motor.
Designed for industrial
applications with a continuous
duty rating.
Heavy­duty construction,
mounted on four swivel casters,
allowing total mobility and
stability.
Safety switch with key. Unit
cannot be started when key is
removed from the switch.
Precision aluminum spin­
balanced impeller for smooth
operation and minimal noise.
Reusable clear plastic collector
bag for improved dust collection
efficiency.
5” heavy­duty PVC hose
between body of fan and
collector.
Collector body mounted on 3
heavy­duty support rods.
Washable with 2 micron filter bag
(not included on “CF” canister
filter model).
Quick­release bag clamps with
metal straps.
Inlet diameter
Airflow capacity
Blower wheel diameter
Sound rating
Bag diameter
Bag capacity
Static pressure (without bag)
Overall dimensions (l x w x h)
Intake screen prevents larger
pieces from jamming in the
impeller.
Optional accessories
2 micron filter bag (#10­015).
Clear plastic collector bag (#10­016).
4" x 2 1/2" reducer (#10­072).
4" x 2 1/2" reducer (#10­073).
4" x 2 1/2" reducer (#10­074).
Dust hood 8 1/4" x 8 1/4" x 4"
(#10­076).
Dust hood 10 1/4" x 8 1/2" x 4"
(#10­077).
Motor
Weight
Optional accessories
4" blast gate (#10­080).
Universal dust hood (#10­081).
4" T­fitting (#10­082).
4" Y­fitting (#10­083).
4" elbsow (#10­084).
4" splice (#10­085).
4" x 2 1/2" reducer (#10­086).
4" x 10" dust hood (#10­087).
4" cap (#10­088).
Floor sweeps (#10­078).
4" hose clamp (#10­089).
Window type collector bag (#10­125).
Bag clamp (#10­092).
4" x 50" polyethylene flexible
hose (#10­130).
4" x 50" grey flexible hose
(#10­130G).
Remote control (#10­150R).
4" x 10" polyethylene flexible
hose (#10­410).
(1) 4” (102 mm)
700 cfm
10” (254 mm)
75 to 80 dB
15” (381 mm)
20 gal. (90.9 L)
6 5/32” of water
29 1/8” x 16 1/2” x 56 1/2” (740 x 420 x 1430 mm) ­ 10­005A
29 1/8” x 16 1/2” x 61” (740 x 420 x 1550 mm) ­ 10­005AS
29 1/8” x 16 1/2” x 49 1/4” (740 x 420 x 1250 mm) ­ 10­005ASCF
1 HP, 110 V, 1 Ph, 7 A
55 lbs (25 kg) ­ 10­005A
61 lbs (30 kg) ­ 10­005ACF
72 lbs (33 kg) ­ 10­005ASCF
Accessory kit for dust collector ­ 1
machine hook­up (#10­100).
1/9/2017
#10­110/10­110CF │ Dust collector ­ 2 HP
General International │General / General International product
Features
#10­110A │ 2 HP dust collector
Heavy­duty motor design with a
continuous duty rating for
industrial applications.
Equipped with totally enclosed,
fan cooled, permanently
lubricated motor.
Heavy­duty base, mounted on
four swivel casters for total
mobility and stability.
Precision spin­balanced
aluminum impeller for smooth
operation, minimal noise and to
reduce the risk of sparking.
Equipped with 2 micron filter bag
(not included on “CF“ canister
filter model).
Quick­release bag clamps with
metal straps.
Safety switch with key, prevents
unit from being started when key
is removed.
Heavy­duty collection bag made
from extra thick, transparent,
recyclable plastic.
Optional accessories
4" x 2 1/2" reducer (#10­072).
4" x 2 1/2" reducer (#10­073).
4" x 2 1/2" reducer (#10­074).
Dust hood 8 1/4" x 8 1/4" x 4"
(#10­076).
Dust hood 10 1/4" x 8 1/2" x 4"
(#10­077).
Floor sweeps (#10­078).
4" blast gate (#10­080).
Universal dust hood (#10­081).
4" T­fitting (#10­082).
4" Y­fitting (#10­083).
4" elbsow (#10­084).
4" splice (#10­085).
4" x 2 1/2" reducer (#10­086).
4" x 10" dust hood (#10­087).
4" cap (#10­088).
4" or 5" hose clamp (#10­089/10­090).
Bag clamp (#10­093).
Accessory kit for dust collector
1 machine hook­up (#10­100).
2 micron filter bag (#10­115).
Inlet diameter
Airflow capacity
Blower wheel diameter
Sound rating
Bag diameter
Bag capacity
Static pressure (without bag)
Overall dimensions (L x W x H)
Motor M1
Motor M2
Weight
(1) 6” (152 mm) / (or 2) 4" (102 mm)
1550 cfm
12 3/4” (323 mm)
80 to 90 dB
20” (508 mm)
42 gallon (190.9 l)
11 1/4” of water
39 3/8” x 31 1/2” x 74 3/4” (1000 x 800 x 2000 mm) ­ 10­110A
39 3/8” x 31 1/2” x 66 3/4” (1000 x 800 x 1746 mm) ­ 10­110ACF
2 HP, 220 V, 1 Ph, 9 A
2 HP, 600 V, 3 Ph, 2.6 A
132 lbs (60 kg) ­ 10­110A
141 lbs (64 kg) ­ 10­110ACF
Optional accessories
Clear plastic collector bag (#10­120).
Window type collector bag
(#10­125).
4" x 50" polyethylene flexible
hose (#10­130).
4" x 50" grey flexible hose
(#10­130G).
5" or 6" x 50" polyethylene flexible
hose (#10­135/10­140).
Accessory kit for dust collector
2 machine hook­up (#10­200).
Remote control (#10­220R).
4" x 10" polyethylene flexible
hose (#10­410).
Fire protection cage (#10­420).
Table saw dust hood (#50­190).
#25­200 M1 │ "Maxi­Lathe VF+" 12" x 17 5/16" wood lathe
1/16/2017
General International Features
#25­200 │ "Maxi­Lathe VS+" 12" x 17" wood lathe ­ variable speed
Headstock pivots 360° with 180°
positive stop for outboard
turning.
Quick lock control levers easily
position tool rest.
Large 12″ inboard bowl turning
capacity.
Stable cast­iron frame, head &
tailstock to reduce chatter and
vibration for smoother turning.
Maximum distance of 17 5/16″
between centers.
Maximum distance of 49″
between
centers with optional bed
extension
(Item #25­205).
Quick release belt tension lever
for faster, easier speed changes.
Three variable speed ranges:
300 to 900, 600 to 1800 & 1200
to 3600 rpm.
Digital spindle speed display.
12″ tool rest with sturdy 1″ diameter support post.
Forward/reverse switch.
Features positive spindle
indexing in 10° increments ­ total
36 index positions.
Spindle speed (variable)
Swing over bed
Swing over tool rest
Swing over side bed
Swing over side tool rest
Distance between centers
Spindle thread
Tailstock through hole
Morse taper
Self ejecting travel
Tool rest
Face plate
Indexing positions
Motor
Weight
300 ­ 3600 rpm
12” (304 mm)
8 1/4″ (210 mm)
19 1/4” (490 mm)
16 1/8” (410 mm)
17 5/16” (440 mm)
1” (25.4 mm) ­ 8 tpi
3/8” (10 mm)
MT #2
2 1/8” (55 mm)
12” (305 mm)
3” (76 mm)
36 x 10°
³∕ࠀ HP, 110 V, 8 A, 2500 rpm
146 lbs (66.5 kg)
Optional accessories
4" ­ 4 jaw scroll chuck 1" ­ 8 (#25­105).
Included accessories:
32" bed extension (#25­205).
MT #2 rolling center (#25­145).
Live center.
Spur center.
Knockout bar.
Safety glasses.
MT #2 spur center (#25­155).
MT #2 lathe center (#25­170).
3" face plate (#25­175).
► Pivoting headstock for outboard
turning.
6" face plate (#25­185).
4 pc wood turning chisel set (#25­210).
Stand (#25­195N).
Stand (#25­196).
Self­centering pen dilling vise
(#70­120).
► Digital spindle speed display.
1/9/2017
#30­005HC │ 13" planer with helical head
General International │General / General International product
Features
#30­060HC │ 13" heavy­duty bench­top planer with helical cutter head
Powerful 15 A motor with thermal
overload protection.
Front and rear fold­down
extension tables for smooth easy
stock feeding.
Built­in inset lifting handles &
onboard tool storage.
Large depth of cut adjustment
handle – one full rotation equals
1/16”.
Easy to read thickness indicator
with graduated scale in inches
and metric.
Safety on/off switch with lock­out
key to prevent unauthorized use.
Depth of cut indicator.
Pre­set depth stop for repeat
cuts at 1/8”, 1/4”, 1/2”, 3/4”, 1”, 1
1/4", 1 1/2” and 1 3/4”.
Included dust hood has both 2
1/2” and 4” dust outlets.
Helical head with 26 reversible
two­sided carbide inserts.
Cutter head supported on 4
posts to ensure head stability
Snipe lock bar on cutter head to
help minimize workpiece snipe.
Optional accessories
Table area with extensions (l x w)
Maximum planing width
Maximum thickness of stock
Minimum thickness of stock
Minimum length of stock
Maximum depth of cut (full width)
Number of inserts
Cutterhead speed
Feed speed
Motor
Weight (shipping/net)
Set of ten carbide inserts
(#30­006).
Set of ten M5 screws for 30­006
(#30­008).
INCLUDED:
13" Helical cutter head, 26 double­face inserts.
33 3/4” x 13” (860 x 330 mm)
13” (330 mm)
6” (152 mm)
1/8” (3 mm)
5” (127 mm)
1/16” (1.5 mm)
26
10,000 rpm
26 fpm
120 V, 15 A
91 lbs (41.5 kg) / 84 lbs (38 kg)
1/16/2017
#40­100MEP │ Router table kit
General International Features
#40­100MEP │ Router table kit with MDF table and phenolic router plate
15 3/4″ x 25 5/8″ MDF router
table.
Sturdy steel stand includes easy
access on/off safety switch with
removable lock­out key & non­
slip rubber feet.
Standard 9 1/4″ x 11 3/4″ router
plate opening with phenolic
router plate included.
Deluxe 27″ router fence has 2
1/4″ dust collection outlet and
adjustable scales.
Optional accessories
4 pc zero clearance insert ring set
(#40­074).
4 pc insert ring set 1/4″, 1/2″, 2
1/2″ & 1 3/8″ (30 mm for #40­099)
(#40­076).
Table size
Router insert plate
Fence size (each)
Maximum fence travel
Dust outlet
Distance from spindle center to front edge of table
T­slot dimensions
Distance between t­slot & spindle center
Table opening sizes (diameter)
Flip stop (#40­090).
Leveler bars for 9 1/4″ x 11 3/4″
plates or lifts (#40­092).
9 pcs brass precision template
guide set (#40­099).
On/off switch for router table (#40­110).
Aluminum router insert plate
(#40­115).
Stock pusher (#40­120).
Vertical featherboard (#40­160).
Horizontal featherboard (#40­175).
Reducer collar (#40­312).
Reducer collar (#40­314).
Included accessories:
Stand (#40­060).
MDF table (#40­047).
Router fence (#40­065).
Phenolic router plate (#40­114).
15 3/4″ x 23 5/8″ (400 x 600 mm
9 1/4” x 11 3/4" (235 x 298 mm)
3” x 15 1/4” x 3/4” (76 x 387 x 19 mm)
6” (152 mm)
2 1/4” (57 mm)
8" (205 mm)
3/4” x 3/8” (19 x 10 mm)
3/8" x 1/4" (10 x 7 mm)
3/4": 5 1/16” (135 mm) / 3/8": 6 9/16" (167 mm)
(with insert ring) 1 1/2″ (38 mm)
(witout insert ring) 3 3/4″ (95 mm)
1/20/2017
#50­090RC M1 │ 10" contractor saw
General International │General / General International product
Features
#50­090RC│ 10" contractor saw (left tilt)
Sturdy open base steel stand.
Heavy­duty, precision cast­iron,
ribbed table with miter gauge t­
slots.
2 1/2″ dust port allows easy
connection to a dust collection
system.
Deluxe, quick adjusting miter
gauge.
Ruggedly built saw carriage.
Arbor driven by a two step belt,
ensuring straightness and
accuracy when the blade is tilted.
Combination riving style splitter
and see through blade guard
with anti­kickback pawls, and a
second European styleriving
knife also included.
Includes 30″ Excalibur aluminum
T­fence rip fence system.
Smooth running belt driven 2 HP
induction motor for quiet start­up
and operation, and longer
running life.
Large paddle­style stop switch.
Optional accessories
Zero­clearance table saw insert
(#50­020).
Blade diameter
Arbor diameter
Arbor speed
Maximum depth of cut at 90°
Maximum depth of cut at 45°
Maximum rip to right of blade
Dado capacity
Table size (w/o extension wings)
Extension wings size
Dust port diameter
Overall dimensions (l x w x h)
Motor (pre­wired 120 V)
Weight
10” (254 mm)
5/8” (16 mm)
3450 rpm
3 1/4" (83 mm)
2 5/16" (59 mm)
30" (763 mm)
3/4" (19 mm)
20" x 25 1/4" (508 x 641 mm)
(2) 10" x 25 1/4" (254 X 641 mm)
2 1/2" (64 mm)
66 1/2" x 38" x 43 1/2" (1690 x 965 x 1150 mm)
2 HP, 120/240V, 11.5/5.7A
217 lbs (98.5 kg)
Zero­clearance table saw insert
(#50­020R).
Deluxe cast­iron miter gauge
(#50­145).
Zero clearance DADO insert (#50­230R).
DADO insert (#50­230S).
Assorted 10" carbide blades (#55­100 to 55­190).
3 piece ­ 10" x 5/8" carbide blade
assortment with deluxe carrying
case (#55­300).
Deluxe push stick & holder (#T­Stick / #T­Bracket).
Aluminum T­Fence
Included accessories:
Contractor saw includes 50­090R saw and sturdy fixed leg steel stand (#50­096).
1/20/2017
#50­090RK M1 │ 10" job site saw
General International │General / General International product
Features
#50­090RK │ 10" job site saw (left tilt)
Heavy­duty folding stand with
wheels for easy mobility and
storage.
Heavy­duty, precision cast­iron,
ribbed table with miter gauge t­
slots.
2 1/2″ dust port allows easy
connection to a dust collection
system.
Deluxe, quick adjusting miter
gauge.
Ruggedly built saw carriage.
Arbor driven by a two step belt,
ensuring straightness and
accuracy when the blade is tilted.
Combination riving style splitter
and see through blade guard
with anti­kickback pawls, and a
second European styleriving
knife also included.
Includes 30″ Excalibur aluminum
T­fence rip fence system.
Smooth running belt driven 2 HP
induction motor for quiet start­up
and operation, and longer
running life.
Large paddle­style stop switch.
Blade diameter
Arbor diameter
Arbor speed
Maximum depth of cut at 90°
Maximum depth of cut at 45°
Maximum rip to right of blade
Dado capacity
Table size (w/o extension wings)
Extension wings size
Dust port diameter
Overall dimensions (l x w x h)
Motor (pre­wired 120 V)
Weight
10” (254 mm)
5/8” (16 mm)
3450 rpm
3 1/4" (83 mm)
2 5/16" (59 mm)
30" (763 mm)
3/4" (19 mm)
20" x 25 1/4" (508 x 641 mm)
(2) 10" x 25 1/4" (254 X 641 mm)
2 1/2" (64 mm)
69" x 38" x 42 1/2" (1745 x 965 x 1080 mm)
2 HP, 120/240V, 11.5/5.7A
233 lbs (106 kg)
Optional accessories
Zero­clearance table saw insert
(#50­020).
Zero­clearance table saw insert
(#50­020R).
Deluxe cast­iron miter gauge
(#50­145).
Zero clearance DADO insert (#50­230R).
DADO insert (#50­230S).
Assorted 10" carbide blades (#55­100 to 55­190).
3 piece ­ 10" x 5/8" carbide blade
assortment with deluxe carrying
case (#55­300).
Deluxe push stick & holder (#T­Stick / #T­Bracket).
Aluminum T­Fence
Included accessories:
Job site saw includes 50­090R saw and folding stand (#50­095).
1/9/2017
#90­040 M1 │ 12" wood cutting bandsaw
General International │General / General International product
Features
#90­040 │ 12" wood cutting bandsaw
Sturdy welded steel frame &
precision balanced wheels with
replaceable tires.
Easy­to­assemble open­base
steel stand.
Precision easy­adjust European
style blade guide bearings
included.
Two cutting speeds for excellent
results in either hard or soft
woods.
Miter gauge with aluminum
crosscut fence included.
Deluxe dual­position rip fence
system.
Hinged doors and easily
accessible blade tension knob,
for fast blade changes and
adjustments.
Extra­large 21 1/2" x 15 3/4"
cast­iron table.
Smooth running heavy­duty 2/3
HP motor.
Safety lock­out switch with
removable key to prevent
unauthorized use.
Multi­size dust port fits 4”, 3”, or
2” hose.
Optional accessories
N/A
Wheel size
Wheel speeds (2)
Blade speeds (2)
Blade width
Blade length
Table size
Table tilt
Table height
Maximum width of cut
Maximum depth of cut
Dust outlet
Base dimensions (l x w)
Motor
Weight
12” (315 mm)
445 & 970 rpm
1444 & 3150 lin. fpm
1/8" to 3/4” (3 to 19 mm)
88” (2240 mm)
21 1/2" x 15 3/4" (548 x 400 mm)
0° to 45° (right)
37 3/8" (950 mm)
12” (305 mm)
6 1/2” (165 mm)
2", 3" & 4" (51, 76 & 102 mm)
18 1/4” x 15 3/4” (465 x 400 mm)
2/3 HP, 120 V, 6.4 A
165 lbs (75 kg)
www.general.ca
Contact Us: PH: 844-877-5234
EM: customerservice@gipowerproducts.com
2014-07-15 9:48 AM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising