SmartMotion™

ROUTERS & GATEWAYS
SmartMotion™
TWIN MODULE CELLULAR ROUTER FOR REDUNDANT RELIABILITY
PRODUCT FEATURES
•
•
•
•
•
•
•
•
•
•
Two Independent cellular modules for advanced fail over feature
Powerful CPU and enhanced memory to support high demand customer applications
Load Balancing
Extended operational temperature range from -40 °C to +75 °C
10-60 VDC operated with transient and reverse polarity voltage protection
GPS and GLONASS support
Low power consumption mode for solar and battery power applications
Optional industrial grade WiFi
PoE PD, PoE PSE, In/Out, USB Host, MicroSD card holder
Advanced security features
SmartMotion™
TWIN MODULE CELLULAR ROUTER FOR REDUNDANT RELIABILITY
The SmartMotionTM cellular router provides a reliable, secure network, with failover protection for devices and LANs. Two interdependent cellular modules with 2 SIMs slots each to support multiple cellular carriers. Business continuity is never a problem with this advanced fail over
architecture and Load Balancing feature which simultaneously receives Cellular, WiFi and Ethernet data.
APPLICATIONS
CELLULAR NETWORK 1
ENVIRONMENTAL
MONITORING
EMERGENCY SYSTEMS
RS232
RS232
main connection using LTE technology
REMOTE ASSETS
I/O
POS
TERMINALS
INTER
RS232
CELLULAR NETWORK 2
N
ET
backup connection using LTE450 technology
PLC
MONITORING OF
INDUSTRIAL SYSTEMS
MANAGEMENT & MONITORING SW
I/O
SMARTWORX HUB™
RS232
ETH
ETH
WiFi
ETH
OPEN VPN SERVER
SMARTCLUSTER™
WiFi
MONITORING TOOL
R-SEENET™
METER
REMOTE ASSETS
ETH
TRAFIC CONTROL
SECURITY CONTROL
ETH
KIOSK
GAMING TERMINALS
LEADING THE INDUSTRY
SmartMotionTM automatic wireless failover protects
against loss of communications in wired or wireless networks by using
dual LTE/4G cellular module technology that accommodates multiple
cellular carriers. Smartmotion provides transfer speeds up to 50 Mbit/s
and download speeds of up to 100 Mbit/s meeting the high demand
required for video transfer.
is designed and tested to meet the
The SmartMotion
requirements of industrial, mobile, security and other harsh environment application where standard commercial designs fail. Specifications
include wide operating temperature ranges from -40 to +75 °C (-20 to
+60 °C LTE450 module), input voltage range 10 V DC to 60 V DC, and
advanced sleep mode feature to allow low power consumption for solar
and battery power applications.
TM
The SmartMotion
places intelligence out at the network
edge with an extremely powerful CPU and enhanced embedded memory
capacity providing full support for LTE/4G (long Term Evolution) speeds
and applications. A secure Web interface allows users to configure and
manage the SmartMotionTM from remote locations.
TM
The router can also upgrade its configuration and firmware from the operator’s central server, allowing for simultaneous mass reconfiguration of
every router on the network. Users may insert Linux scripts and they can
create multiple configurations for the same router. Users may switch from
one configuration to another at any time.
The flexible SmartMotionTM concept includes 2 Ethernet
ports with 2 independent LANs/IP addresses. The standard configuration
also includes 1 USB host port, 1 microSD card holder, 4 SIM card holders
for automatic failover to an alternate service provider, 2 binary inputs(I/O)
, 1 binary output (I/O) and onboard GPS. An optional built-in WiFi module
is also available, with industrial grade operating temperature ranges from
-40 to +75 °C (-20 to +60 °C LTE450 module).
The SmartMotionTM supports real time data encryption and
the creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports
DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numerous other functions, as well as additional software like SmartWorx HUB,
SmartCluster VPN Server and R-SeeNet.
2 | www.bb-smartcellular.com / Enabling an Intelligent Planet
www.bb-smartcellular.eu
TECHNICAL SPECIFICATION
Power, Consumption, Environmental, IP cover
Power supply
Power consumption – Idle / Average / Peak / Sleep Mode
Temperature range – Operating / Storage
Temperature range LTE450 – Operating / Storage
Humidity – Operating / Storage (non condensing)
Cold Start
Operating Altitude
Ingress Protection Rating
10 – 60 VDC (2–Way Molex connector)
2.5 W / 4W / 11 W / 10 mW
-40 to +75 °C / -40 to +85 °C
-20 to +60 °C / -40 to +85 °C
0 to 95 % / 0 to 95 %
-35 °C
2000 m / 70 kPa
IP30
Cellular module parameters
Order code
SR352xxxxx
Cellular Module #1
Pentaband LTE
Cellular Module #2
Pentaband LTE
Order code
SR355xxxxx
Pentaband LTE
LTE450
Pentaband LTE Specifications
Bit rate 100 Mbps (DL) / 50 Mbps (UL)
3GPP release 8 compliant
Supported frequencies:
800 / 900 / 1800 / 2100 / 2600 MHz
LTE450 Specification
Bit rate 100 Mbps (DL) / 50 Mbps (UL)
3GPP release 9 compliant
Supported frequencies:
450 / 800 / 1800 / 2600 MHz
Bit rate 42.0 Mbps (DL) / 5.76 Mbps (UL)
Supported frequencies: 900 / 1800 / 2100 MHz
Bit rate 237 kbps (DL) / 59.2 kbps (UL)
Supported frequencies: 900 / 1800 MHz
Bit rate 42.0 Mbps (DL) / 5.76 Mbps (UL)
Supported frequencies: 900 / 2100 MHz
Bit rate 236 kbps (DL) / 59.2 kbps (UL)
Supported frequencies: 900 / 1800 MHz
LTE
WCDMA
GPRS/EDGE
WiFi - 802.11 a/b/g/n, AP or Client modes
Supported WiFi band 2.4 GHz, 5.4 GHz
Number of clients: 10
Encryption: None, WEP, TKIP, AES
Authentication: Open, Shared, WPA–PSK, WPA2–PSK
5 GHz supported channels – 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
2.4 GHz supported channels – 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
Industry Certifications & Approvals
Radio for general LTE
ETSI EN 301 511 v9.0.2, ETSI EN 301 908–1 v5.2.1, ETSI EN 301 908-2 v5.2.1, ETSI EN 301 908-13 v5.2.1
Radio for LTE450
ETSI EN 301 908-1 v6.2.1, ETSI EN 301 908-13 v6.2.1, ETSI EN 301 489-24 v1.5.1
Emissions/ Immunity
IEC 61000-6-2:2005, ETSI EN 301 489-1 v1.9.2, EN 55022:2010
Safety
EN 60950-1:06 ed.2 (not Hazardous Locations), EN 62311:2008
Vehicle
E8
Environmental
RoHS, RoHS2, REACH, WEEE
Mechanical
Metal case with metal DIN rail
Enclosure Dimensions
Weight
WiFi antenna connector
SIMs for secondary module are covered
55x97x125 mm (150 mm including wall month sides)
420 g
ANT, DIV antenna connector - cellular module 1
ANT, DIV antenna connector - cellular module 2
IN0, IN1, OUT
GPS antenna connector
Ethernet 10/100 ports
Router SmartMotion is compatible with:
USB Host
Power connector
R-SEENET
Primary SIM - cellular module 1
Secondary SIM - cellular module 2
Back up of primary SIM - cellular module 1
SD card slot
SMARTCLUSTER
DIN holder
Robust metal case
Back up of secondary SIM - cellular module 2
RESET button
SMARTWORX HUB™
www.advantech-bb.com
|3
Features
Network and Routing
Security
VPN tunnelling
Configuration
Firmware Management
Diagnostic
Status
Log
Controling and diagnostic
Event Engine
Support and Warranty
Other
DHCP Server, , DHCP Client, NAT/PAT, VRRP, Dynamic DNS client, DNS proxy, VLAN, QoS, NTP Client/ Server,
IGMP, BGP, OSPF, RIP, SMTP, SMTPS, SNMP v1/ v2c/ v3, Backup routes, PPP, PPPoE, SSL, Port Forwarding, Host
Port Routing, Ethernet Bridging
HTTPS, SSH, VPN tunnels, SFTP
Firewall (IP Filtering, MAC address filtering, Inbound and outbound Port filtering)
Open VPN client and server and P2P, L2TP, PPTP, GRE, EasyVPN, DMVPN
IPSec with IKEv1 and IKEv2
Web server, SSH, Four configuration switchable profiles, Automatic configuration update from server
Backup configuration, Restore configuration
Automatic firmware update from server, Locally via LAN and USB or remotely OTA (HTTP, HTTPS),
Over-the-Air software updates, Over-the-Air cellular module update from FW
One CLICK report – current configuration / factory identification / system log / kernel log / reboot log /
routing table, Remote diagnostics possible via SSH
Network Status, DHCP Status, IPSec Status, Statistics history for last 60 days
System Log, Reboot Log, Kernel Log
SMS, SNMP v1/v2c/v3, Statuses, Log
StartUp script & Up/Down script (Bash), Digital Input, Network Parameters, Data Usage, Timer, Power, Device
Temperature.
Report Types: RAP, SMS, email, SNMP Trap, TCP (csv, xml, binary)
3 years warranty, Free device software upgrades, Optional warranty extension
Support of IPv6
Ports, LED, Antennas
2x ETH
SIM
LED Indicators
5x ANT - 2x ANT, 2x DIV, GPS
WiFi antenna - *optional
USB
I/O
SD Card
RST
RJ45, 10/100 Mbps, 1.5 kV RMS
4 Mini SIMs (2FF) (rear panel)
PWR, DAT, WAN, ETH, SIM, USR, POE, IN0, IN1, OUT
SMA connectors
R-SMA connector
USB Host connector 2.0
6-Way Molex connector - 2x binary input, 1x binary output
1x Micro SD Card slot (rear panel)
RESET button
PoE Parameters
PoE PD
PoE PSE
Input voltage range
42.5 – 57 V
44 – 57 V, 65 W
Power available
25.50 W
2x 25.50 W (ETH0, ETH1)
Maximum current
600 mA
Insul. Strenght
1.5 kV from the router
none
Standards IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) supported. Cabling needed is Category 5, up to 12.5 Ω. It is possible to use a passive PoE injector.
Partner:
Worldwide Headquarters
Corporate Headquarters
Corporate Headquarters
ADVANTECH
No. 1, Alley 20, Lane 26, Rueiguang Road 707 Dayton Road
Ottawa, IL 61350 USA
Neihu District, Taipei 11491
Taiwan, R.O.C
Phone: 1-815-433-5100
Fax: 1-815-433-5109
Phone: 0800-777-111
[email protected]
www.advantech.com
www.bb-smartcellular.eu
www.advantech-bb.com
European Headquarters
Czech Office
Oranmore, Co. Galway, Ireland
Sokolská 71
562 04 Ústí nad Orlicí III.
Czech Republic
Phone: +353 91 792444
Fax: +353 91 792445
[email protected]
Phone: +420 465 521 020
Fax: +420 464 647 299
Email: [email protected]
Web: www.bb-smartcellular.eu
PRO–2016-04-1-EN