advertisement
1
Welcome to the ULTRA-MP3 User Guide
Welcome to the ULTRA-MP3 User Guide
Congratulation on your purchase of product. Please read through these operating instruction. After you finish, please put them away in a safe place for further reference.
System Requirement
1. IBM compatible PC
2. Pentium II or above
3. Microsoft Windows 98/SE/ME/2K/XP
4. 64 M RAM
5. USB port
6. CD-ROM
Function Indicator Symbols
These symbols appear on the indicator panel to indicate the current mode .
See the chart below.
MIC
Volume Up Button
Volume Down Button
Record Button
Play/Pause Button
Mode Button
Flash
Memory
Card
SD/MMC Card Reader
Eject
Phonejack Hold Button
Power on/off Button
Forward Button
Backward Button
Function Indicator Symbols
2
Driver Installation
Using the Utility
For windows 98 user
For windows 98 user, please simply insert the enclosed
CD into CD-ROM drive.
1. Double Click [ My computer ] from desktop
2. Select CD-ROM drive
3. Click the right button fo mouse andthen select [ Open ]
4. Double click the [ Set up.exe ] to install driver.
5. A series of screens, a wizard will guide you through the software installation.
Firmware updating
ULTRA-MP3 provides a useful utility for updating the latest firmware. To install this utility, simply insert the enclosed CD into
CD-ROM drive.
1 Double Click [ My computer ] from desktop.
2 Select CD-ROM drive.
3 Click the right button for mouse and then select [ Open ].
4 Double click the [Set up.exe] to install driver.
5 A series of screens, a wizard will guide you through
the software installation.
6 Connect the ULTRA-MP3 to USB port.
7 Please go to [ Start] " [ Program file] " and find [ SigmaTel
MSCNMMC Audio Play] " [ Firmware download]
to load the firmware.
3
8 Click [ start ] to run the firmware installation.
9. A serires of screens, a wizard will guide you through the software installation.
ULTRA-MP3 functions Description
Power on
1. Press the Power " " button
2. In 2 seconds, LCD show ULTRA-MP3 ( fig.a) fig.a
3. The current track and the playback time
indicator will be displayed on LCD. ( fig.b) fig.b
4. If there is no MP3 files on the memory,
it will display NO Files. ( fig.c)
Power off fig.c
Please press Power " " button for 5 seconds and LCD shows [ Continue
Holding To Power Off ] and [ Shut Down ].
Continue Holding To
Power Off
ULTRA-MP3 functions Description
4
ULTRA-MP3 functions Description
Navigating the menus
By pressing M button " " , the menu will pop out. Move FWD " "
and BWD " " button through menus. Press to select highlighted items.
Music
Voice
Settings
Erase files
Memory
Exit
Music
1. After pressing the Power button " ",
please press Play button " " to play MP3 music.
2. The current track and the playback time indicator will be displayed on LCD ( fig.e
).
5 fig.e
3. By pressing Play " " button again to pause MP3 music.
4. By pressing Play " " button again to release the pause function.
I
Stop MP3 Music
By pressing Power button " " the MP3 Music will stop.
I
BWD and FWD
1. By pressing the FWD " " or BWD " " button, you could play back to
the previous track or next track.
2. When the song is playing, it will skip to the prior section & the next section if
you press the FWD or BWD button continuously. If you let go the keys, the
song will go on.
Voice
1. Press the M button " " and then select to Voice.
2. You can listen the voice recording.
I
Voice Recording Function
1. Press Q button " " for 3 seconds to start voice recording.
2. Press Power button " " to stop voice recording.
3. Press Play button " " to listen the voice recording.
V
001/001
V001.Wav
CLASS
01:28
DVR
V
00:01:28
V001.WAV
CLASS
ULTRA-MP3 functions Description
6
ULTRA-MP3 functions Description
Setting
By pressing M button " " , the menu will pop out. press FWD " " and BWD " " button through menus. Press to select highlighted items.
Setting
Erase files
EQ
Play Mode
Contrast backlight
Power Saving
Rec Bitrate
Language
Exit
I
EQ( Equalizer) Mode
There are five modes : Rock, Jazz, Classical, Pop, Normal
1. Select to Settings " EQ
EQ
Play Mode
2. By pressing the Play button " " to select EQ modes
between Rock, Jazz, Classical, Pop, Normal.
Rock
Jazz
Classical
Pop
Normal
7
I
Play Mode
1. Select to Settings " Play Mode.
Play Mode
Contrast
2. By pressing the Play button " " to select Normal, Repeat Track,
Repeat All, Shuffle, Shuf. Repeat
Normal
Repeat Track
Repeat All
I
Contrast
1. Select to Settings " Contrast
Play Mode
Contrast
2. Move FWD " " and BWD " " button to adjust LCD contrast.
Contrast
ULTRA-MP3 functions Description
8
ULTRA-MP3 functions Description
I
Power Saving
1. Select to Settings " Power Saving
2. By pressing the Play button " " to select the timeout after which
the ULTRA-MP3 will shut down for power saving.
1 min
2 mins
5 mins
10 mins
Disable
Strongly recommend to set the power saving mode to Disable mode.
I
Rec Bitrate
1. Select to Settings " Rec Bitrate.
Rec Bitrate
Language
2. You can select the record compress ratio which is between 8000 Hz and 48000 Hz.
8000 Hz
16000 Hz
32000 Hz
48000 Hz
3. The lower compress ratio is for lower record quality, so it's suitable for long
time recording, and vice versa.
9
I
Language
1. Select to Settings " Language
Language
Exit
2. Select the language for the display texts.
Language
English
Chinese
Erase files
1. Press the M button " " and then select to Erase files.
Erase file
Memory
2. The voice recording file will be erased and press FWD " " and BWD " "
button to select the file you want to erase.
Delete? 001
Song Title
ULTRA-MP3 functions Description
10
ULTRA-MP3 functions Description
Memory
1. Press the M button " " and then select to Memory.
Memory
Exit
2. It shows the internal memory and free memory of ULTRA-MP3 .
I N T : xxx MB
FREE: xxx MB
Lock Function
1. Press the Hold button " ",
you can lock the ULTRA-MP3 to prevent the keys being accidentally pressed.
V CLASS
01:28
Key Locked
2. Press the Hold button " " again to release the Lock function.
V CLASS
001/001 01:28
Song title
11
Repeat A-B function
How to repeat a certain part of track continuously.
1. Press Q button " " , the A-> " " icon
will show on LCD.(flg.f)
2. It will set the start of the repeat part A.
3. Press Q button again , the A->B icon " "
will show on LCD. (flg.g)
4. It will set the end of the repeat part B.
5. Now, it will repeat the selected part ( A-B) of the
track continuously.
6. Press Q button " " , it will stop A-B function.
Battery Indicator
Please change the battery when indicator appears on the LCD. fig.f
A-1
CLASS
V
A-B
CLASS
01:28
Song title
fig.g
A-B
V
001/001
CLASS
01:28
Song title
Volume control Function
By pressing the VOL+ " " / VOL- " " button, the volume steps will increase or decrease.
ULTRA-MP3 functions Description
12
ULTRA-MP3 functions Description
USB Pock drive Function
How to use USB Pock drive?
1. Attach MP3 player to USB port .
2. The illustration (fig.h) will show on LCD.
SD/MMC card Function
Support Play and Plug.
1. Insert the SD/MMC card to the card reader.
2. Press FWD " " /BWD " " button, the icon will show on LCD.
3. You can see TWO Portable drives on you PC. ( for windows 2000 user, please
make sure to install the Windows Service Pack3 ; For Windows 98 user, please
make sure to install the enclosed driver)
4. When data transmitting, the musical note icon will running on LCD.
5. When data transmitting finished, the musical note will disappear on LCD.
6. The ULTRA-MP3 do harm when you take out the ULTRA-MP3
while the transmitting have not completed.
13
Auto Power Off Function
ULTRA-MP3 will power off in 60 seconds if the Play or REC button is not pressed.
« Support SD/MMC card up to 512MB.
Expansion Options
Backlight
1. Press the " " button, Setting " Back light.(fig.h)
2. Press FWD " " /BWD " " button and then select the timeout after which
the backlight will off.(fig.i)
Backlight
Power Saving fig.h
5 Secs
10 Secs
Always On
Disable fig.i
Expansion Options
14
Expansion Options
FM Tunner
1. Press the " " button, Setting " FM Tunner.
FM Tunner
Setting
2. You will read the radio frequency shown on the LCD.
3. Press FWD " " & BWD " " button to search FM radio stations and set up
as preset memory channel by Play " " button.
V
01/01
96.3 MHZ
4. It shows "PRESET" icon on LCD screen when setting completed.( fig.h)
V
96.3 MHZ
15
5. Under preset memory channel, to press FWD " " and BWD " " button
for selecting preset FM radio stations.
6. Remember to press Play " " button again to release "PRESET" icon for
searching FM radio stations.
7. In " FM Tuner "mode, save your favorite station by pressing " " button
and select " Save Station " .
Save Station
Delete Station
8. It blinks "SA?" on the LCD screen.
9. Select the memory channel number by pressing FWD " " and "BWD " "
button then press Play " " button to save.
V
96.3 MHZ
10. In " FM Tuner" mode, to start auto-scan function by pressing " " button
and select "Auto Scan." When the radio is on, searching stops when
a channel is found.
Auto-Scan
Exit
11. Press " " button and select "Delete Station" to delete stations.
Save Station
Delete Station
Expansion Options
16
E-mail Function
E-mail Function
Begin to use Software
1. Click[ My Computer ] and you will see that Windows has automatically
assigned a drive letter for every removable disk detected.
2. double-click the [ Removable Disk ].
17
3.Find the [ My Tools ] folder and double-click the [ My Tools] icon.
4.Please doubled-click the [ THMail.exe ] program to start the software.
5.Follow the on-screen instructions to proceed.
Begin to use Software
I
Setting : u
A. POP 3 Setting
1. Click "Setting: Button
2. Click on the POP3 tab
3. Iin the POP3 field, type the name of the
incoming e-mail server.
4. In the User field, type your account name
5. In the Password field, type your password
6. Please check in the Check Leave Mail(s)
in POP3 server box or you can check in the
Launch thmail.exe after device pluging
box for your preference. u
B. SMTP Setting
1. Click on the SMTP tab
2. Iin the SMTP field the name of the
outgoing e-mail server
3. In the User field, type your account
name.
4. In the Password field, type your password
5. In the Name field, type your name as you
want it to appear to everyone who gets
e-mail from you.
6. In the Address field, type your full e-mail
address and then Click "OK"
E-mail Function
18
E-mail Function
Create Address Book
1. Click [New] " " Button and then click [ Address ] " " Button.
2. Click the New button,
3. Type the person's name and the e-mail address with no spaces and click "ok".
3. Click the message you want to delete from POP3 server and then click "
"Remove" button.
4. Click the "Recheck" button to check POP3 mail server again.
I
Compose and send email :
1. Click in the message area, and type your message as shown below.
2. Click Send .
19
I
Check your Email Account:
1. Click "Check" Button
2. Click the message you want to read and then click "Get Mail'
Button to download the mail you just select from the message list.
I
Import email into Microsoft Outlook Express:
1. Click "Open" button.
2. On the File menu, point to [Copy to folder] or [Move to folder]
E-mail Function
20
E-mail Function
3.Verify the location of your messages, and then click ok. Then you will find your email
message into outlook express.
Back up and restore the email messenger software
When first time installed, Email messenger software will be automatically backup to your PC. After formatting your ULTRA-MP3 you can still restore the email software by following the procedures below.
1.Click on [ My documents ] folder
2.You will find [ ULTRA-MP3-Backup ] folder
3.Find thmail.exe and smail.exe for installation.
4. After executing thmail.exe and smail.exe file, the Email Messenger software will
be restored to your ULTRA-MP3.
Attentions
Windows 2000 Service Pack 3 (SP3) provides the latest updates to the Windows
2000 family of operating systems . Windows 2000 SP3 allows you to install all the latest Windows 2000 updates with a single installation.
21
The 2000 Service Pack 3 (SP3) is protected by copyright of Microsoft corporation.
Operation Notes and trouble shooting
1. Please do not drop the ULTRA-MP3 and keep it in areas free from extreme
temperature changes, moisture and dirty environment.
2. The ULTRA-MP3 do harm when you take out the ULTRA-MP3
while the transmitting have not completed.
3. Please remove the battery to avoid electrical leakage when you do not use ULTRA-MP3.
4. After turning on the MP3 player, there is no signal on LCD.
s Please replace or check battery placement.
s Please check if the battery is inserted.
s Battery life may vary with different manufacturer.
5. If the key buttons could not work, please check if the " Hold" button is on.
Please press it again to release the lock function.
s Please check if the volume control turn it to level 0 and please turn it up.
s Please check if the MP3 music file is in the memory
6. For windows 98 user, Please make sure to install the enclosed driver before using ULTRA-MP3.
7. For windows 2000 user, when plugging USB ULTRA-MP3 to PC, you should see two
additional drives on PC .if you only see one additional drive on your PC, s Please make sure to install Windows 2000 SP3 , which allows you to install all the
latest Windows 2000 updates with a single installation.
s you can visit at http:// v4.windowsupdate.Microsoft.com/zhtw/default.asp to update
Windows 2000 with a single installation.
The 2000 Service Pack 3 (SP3) is protected by copyright of Microsoft corporation.
8. ULTRA-MP3 can be used as USB mass storage.
( Removable disk drive, smart card reader).
Operation Notes and trouble shooting
22
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement