Samsung UA55D8000YV Series 8 55inch (UA55D8000) Quick Guide
Add to My manuals20 Pages
Samsung UA55D8000YV boasts a 3D HyperReal Engine which gives you an immersive viewing experience with a refresh rate of 240Hz. It has an exquisite design, featuring an ultra-narrow bezel that complements any décor. Connect to the internet to enjoy a wide range of Smart TV features, including apps, web browsing, and social networking. You can also use the built-in Wi-Fi to mirror content from your compatible smartphone or tablet to the big screen.
advertisement
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Country
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
Customer Care Centre
1300 362 603
0800 SAMSUNG (0800 726 786)
400-810-5858
(852) 3698 4698
Web Site www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com/hk www.samsung.com/hk_en/ www.samsung.com
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
TAIWAN
VIETNAM
3030 8282
1800 3000 8282
0800-112-8888
021-5699-7777
0120-327-527
1800-88-9999
1-800-10-SAMSUNG(726-7864)
1-800-3-SAMSUNG(726-7864)
1-800-8-SAMSUNG(726-7864)
02-5805777
1800-SAMSUNG(726-7864)
1800-29-3232
02-689-3232
0800-329-999
1 800 588 889 www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
© 2011 Samsung Electronics Co., Ltd. All rights reserved.
[UD8000-XY]BN68-03444M-00Eng.indb 1
BN68-03444M-01
LED TV user manual
E-MANUAL
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your product at
www.samsung.com/register
Model _____________ Serial No. _____________
2011-05-12 오후 3:53:46
For more information on how to use e-Manual
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Still image warning
Avoid displaying still images (like jpeg picture files) or still image element (like TV programme logo, panorama or
4:3 image format, stock or news bar at screen bottom etc.) on the screen. Constant displaying of still picture can cause ghosting of LED screen, which will affect image quality. To reduce risk of this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try to display image in full screen mode, use TV set picture format menu for best possible match.
• Reduce brightness and contrast values to minimum required level to achieve desired picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen burnout, refer to proper user manual section for details.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an increase in the internal temperature of the product.
✎
When using a stand or wall-mount, use parts provided by Samsung Electronics only.
x If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.
✎
The appearance may differ depending on the product.
✎
Be careful when you contact the TV because some parts can be somewhat hot.
Installation with a stand.
Installation with a wall-mount.
10 cm 10 cm
10 cm 10 cm
10 cm 10 cm
10 cm
[UD8000-XY]BN68-03444M-00Eng.indb 2
English - 2
2011-05-12 오후 3:53:46
Accessories
✎
Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
✎
The items’ colours and shapes may vary depending on the models.
✎
Check that there is no accessory hidden behind packing materials when you open the box.
[ CAUTION: INSERT SECURELY LEST SHOULD BE DETACHED IN SET
• QWERTY Remote & Batteries (AAA x 4)
• Owner’s Instructions
• Power Cord
• Cleaning-Cloth
• Warranty Card (Not available in some locations) / Safety Guide
AV Adapter Samsung 3D Active Glasses AV/Component Adapter
Holder-Wire stand
Assembling the Holder-Wire stand
Holder Ring (4EA)
[UD8000-XY]BN68-03444M-00Eng.indb 3
English - 3
2011-05-12 오후 3:53:47
Viewing the Control Panel
✎
The product colour and shape may vary depending on the model.
✎
There are control buttons in rear of TV. When you touch the button, control icons appears.
✎
Any object (an electric wire, etc.) near the control panel may cause unintended activation of the OSD.
TV Rear
Remote control sensor
Power Indicator
E (Source) m (Menu) o (Volume) k (Channel)
Aim the remote control towards this spot on the TV.
Blinks and turns off when the power is on and lights up in standby mode.
Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER E button on the remote control.
Displays an on-screen menu, the OSD (on screen display) of your TV’s features.
Adjusts the volume. In the OSD, use the
◄ and ► buttons on the remote control.
buttons as you would use the
Changes the channels. In the OSD, use the <> buttons as you would use the ▼ and ▲ buttons on the remote control.
Turns the TV on or off.
P (Power)
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example).
A small amount of electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
[UD8000-XY]BN68-03444M-00Eng.indb 4
English - 4
2011-05-12 오후 3:53:47
QWERTY Remote
• Before using QWERTY Remote, it should be paired with TV.
•
How to perform the pairing process is explained in next page.
Remote Side View
Displays and selects the available video sources.
Turns the TV on and off.
POWER SOURCE ON/OFF
Gives direct access to channels.
Alternately select Teletext ON, Double,
Mix or OFF.
Adjusts the volume.
Link to various application services.
Quickly select frequently used functions.
Selects the on-screen menu items and changes the values seen on the menu.
Returns to the previous menu.
Buttons used in the Channel and
SMART HUB menu, etc.
Use these buttons in a specific feature.
For details, refer to e-Manual.
1
4
7 8
TTX/MIX
0
2
5
MUTE
M
<
CH LIST
P
<
3
6
9
PRE-CH
SMART
HUB
MENU
GUIDE
5
9
E
7
B C D
SEARCH
W
E-MANUAL
P.SIZE
l
AD/SUBT
Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed.
(Using the remote control with this button set to On will reduce the battery usage time.)
Returns to the previous channel.
MUTE : Cuts off the sound temporarily.
CH LIST : Displays channel lists on the screen.
Changes channels.
Opens the OSD.
Displays the EPG (Electronic Programme
Guide).
Displays information on the TV screen.
Exits the menu.
SOCIAL TV : Connect to Social TV application.
SEARCH : Support to recommendation search word and search function.
W: Turns the 3D image on or off.
E-MANUAL : Displays the e-Manual.
P.SIZE
: Lets you select the Picture Size.
AD/SUBT: Turns the audio description on and off (not available in some locations). / Displays digital subtitles.
[UD8000-XY]BN68-03444M-00Eng.indb 5
English - 5
2011-05-12 오후 3:53:48
QWERTY Side View
Displays the characters the user typed in.
When the user presses ENTER
E, all characters on the screen are removed.
A B C D
1
4
$
7
&
!
ESC
2
@
5
%
8
*
0
)
3
#
6
^
9
(
CAPS
Q
_
A
`
TAB
SHIFT
W
-
S
~
Z
E
D
+
R
F
=
X
SYM
<
@
C
>
T
[
G
V
/
Y
]
H
;
B
,
U
{
J
:
N
.
.COM
I
}
K
‘
M
?
SYM
O
/
P
L
“
ENTER
|
SHIFT
SMART
HUB
SEARCH
Convenient QWERTY keyboard to type characters in
SMART HUB and SOCIAL TV menu, etc.
SYM :
Enables the symbol printed on the lower right side of each button.
OFN(Optical Finger
Navigation) Sensor
In full browser function, it can be used as the pointer.
If the user doesn’t press any button during 30 seconds, the sensor will be off automatically.
To wake up the sensor, press any button on the
QWERTY side.
✎
NOTE
• The remote side doesn’t work when the QWERTY side is up, and vice versa.
Initial Pairing
1. When the user inserts batteries into the QWERTY Remote, “NEED PAIRING PRESS SYM+TAB” will be displayed on the screen.
2. Press SYM and TAB buttons at the same time more than 2 seconds.
✎
The TV can be paired with only one QWERTY remote. Start the pairing process approximately 30 seconds after turning on the TV.
✎
Keep within 20 inches(50 cm) between the QWERTY Remote and the TV.
Performing the Pairing Process Again
Press SYM and TAB buttons at the same time more than 2 seconds.
✎
The TV can be paired with only one QWERTY remote. Start the pairing process approximately 30 seconds after turning on the TV.
✎
Keep within 20 inches(50 cm) between the QWERTY Remote and the TV.
[UD8000-XY]BN68-03444M-00Eng.indb 6
English - 6
2011-05-12 오후 3:53:48
Inserting Batteries
1
• Slide out the battery cover.
3
2
• Push the button right.
4
• Pull the battery tray out.
Model Name
Battery
Dimension(WxDxH)
Weight
• Insert 4 AAA batteries in the tray, insert the battery tray into the QWERTY Remote and put the cover back on.
Specifications - Qwerty Remote
RMC-QTD1
AAA x 4
To extend the battery life, use of alkaline battery is recommended.
2.4 X 1.0 X 6.0 inches
(60.9 x 24.36 x 152.2 mm)
0.295 lbs (134 g)
[UD8000-XY]BN68-03444M-00Eng.indb 7
English - 7
2011-05-12 오후 3:53:49
Changing the Input Source
Source
Use to select TV or an external input sources such as a DVD / Blu-ray player / cable box / STB satellite receiver.
■
TV / Component / PC / USB /
HDMI1/DVI / HDMI2 / HDMI3 /
HDMI4 / AV1 / AV2 / AllShare
✎
In the Source, connected inputs will be highlighted.
✎
PC always stay activated.
SOURCE
✎
When connecting a PC to the HDMI IN 1 (DVI) port with HDMI cable, you should set the TV to
PC mode under Edit Name.
✎
When connecting a PC to the HDMI IN 1 (DVI)
✎ port with HDMI to DVI cable, you should set the
TV to DVI PC mode under Edit Name.
When connecting an AV devices to the
HDMI IN 1 (DVI) port with HDMI to DVI cable, you should set the TV to DVI Devices mode under
Edit Name.
Edit Name
In the Source, press the TOOLS button, and then you can set an external input sources name you want.
■
VCR / DVD / Cable STB / Satellite STB /
PVR STB / AV Receiver / Game / Camcorder /
PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray
/ HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.
Edit Favourites
In the Source, press the TOOLS button to select
Edit Favourites. You can set an external input source to Favourites.
Information
You can see detailed information about the selected external device.
Refresh
In the Source, If the external devices is not displayed, press the TOOLS button to select Refresh. Searching for connected devices.
✎
For best cable connection to this product, be sure to use cables with a maximum thickness as below:
• Maximum thickness - 0.55 inches (14mm)
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎
Preset: Connecting the mains and antenna.
VHF/UHF Antenna
Cable
ANT IN or
English - 8
[UD8000-XY]BN68-03444M-00Eng.indb 8 2011-05-12 오후 3:53:49
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
Press the POWER
P button. Plug & Play is available only when the Source is set to TV.
✎
Before turning on the TV, make sure the antenna cable is connected (p. 8).
1
Selecting a language Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the desired OSD (On Screen Display) language.
(Not available in some locations)
2
3
Wired/Wireless
Network Connection
Software upgrade
Set up your network connection. Press the ENTER
E button to start. If you want to setting to it later, select Skip. For more information, refer to “Wired/Wireless
Network Connection” in the e-Manual.
When network connection settings are complete, Software Upgrade is available.
Select Next to upgrade TV software. Your TV will automatically upgrade, if your
TV need a software upgrade. If you want to upgrade later, select the Skip. For more information, refer to “Software Upgrade” (Preference Features
→ Support
Menu) in the e-Manual.
4
Selecting Store
Demo or Home Use
✎
This may take some time, depending on network status.
Press the
◄ or ► button, then press the
ENTER
E button.
Select the Home Use mode. Store Demo mode is for retail environments.
To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.
Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you watch at home.
5
Selecting an country Press the
▲ or ▼ button, then press the
Select the appropriate country.
ENTER
E button.
6
Selecting an area Press the
▲ or ▼ button, then press the
ENTER
E button.
Select the appropriate area. (Not available in some locations)
7
Setting the
Clock Mode
Set the Clock Mode automatically or manually.
Auto: Allows you to select a time zone.
✎
Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTER E button. (Australia only).
8
Selecting a channel
Manual: Allows you to manually set the current date and time.
Select the channel source to memorise among Digital & Analogue / Digital /
Analogue. When done, select Next. Scans for a channel automatically and stores
9
Enjoy your TV. in the TV.
If you want to watch a broadcast programme, select Close. If you want to enjoy the Smart Hub, select the Smart Hub. The Smart Hub will start. For more detailed information, refer to “Smart Hub” in the e-Manual.
If You Want to Reset This Feature...
Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0.”
If you want to change the PIN number, use the Change PIN function.
You should do Plug & Play ( MENU → System) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”: MUTE
→ 8 → 2 → 4 →
POWER (on).
English - 9
[UD8000-XY]BN68-03444M-00Eng.indb 9 2011-05-12 오후 3:53:49
Connecting to an AV devices
¦
Available devices: DVD, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver, VCR
HDMI connection
HDMI OUT
HDMI to DVI connection
DVI OUT
AUDIO OUT
R-AUDIO-L
Using an HDMI or an HDMI to DVI cable (up to 1080p)
✎
HDMI IN 1 (DVI) , 2 (ARC) , 3 , 4 / PC/DVI AUDIO IN x For better picture and audio quality, connect to a digital device using an HDMI cable.
x
An HDMI cable supports digital video and audio signals, and does not require an audio cable.
– To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.
x
The picture may not display normally (if at all) or the audio may not work if an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.
x
Be sure to use an HDMI cable with a thickness of 14 mm or less.
x Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.
x A basic high-speed HDMI cable or one with ethernet is recommended. This product does not support the ethernet function via HDMI.
x
This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the ARC function is supported by the
HDMI IN 2 (ARC)
port only.
– If 3D Auto View is set to On, some functions such as SMART HUB may be disabled. In this case, set 3D Auto View or 3D Mode to Off.
x The ARC function allows digital audio to output via the HDMI IN 2 (ARC) port. It can be enabled only when the TV is connected with an audio receiver that supports the ARC function.
English - 10
[UD8000-XY]BN68-03444M-00Eng.indb 10 2011-05-12 오후 3:53:50
2
G
VIDEO OUT AUDIO OUT
R-AUDIO-L
G
COMPONENT OUT
P
R
P
B
Y
AUDIO OUT
R-AUDIO-L
VIDEO OUT AUDIO OUT
R-AUDIO-L
AV connection Component connection AV connection
Using a Component (up to 1080p) or an Audio/Video (480i only)
✎
When connecting to
(yellow).
AV IN , the colour of the AV IN [VIDEO] jack (green) will not match the video cable
✎
To obtain the best picture quality, the Component connection is recommended over the A/V connection.
[UD8000-XY]BN68-03444M-00Eng.indb 11
English - 11
2011-05-12 오후 3:53:50
Connecting to a PC and Audio device
¦
Available devices: digital audio system, amplifier, DVD home theatre
DVD home theatre connection
OPTICAL
Headphone connection
Using an Optical (Digital) or a Headphone Cable Connection
✎
DIGITAL AUDIO OUT (OPTICAL) x When a digital audio system is connected to the DIGITAL AUDIO OUT (OPTICAL) jack, decrease the volume of both the TV and the system. x
5.1 CH (channel) audio is available when the TV is connected to an external device supporting 5.1 CH.
x
When the receiver (home theatre) is set to on, you can hear sound output from the TV’s optical jack.
When the TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theatre receiver.
When the source is a digital component such as a DVD / Blu-ray player / cable box / STB (Set-Top-
Box) satellite receiver and is connected to the TV via HDMI, only 2 CH audio will be heard from the home theatre receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your
DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theatre.
✎
Headphones H: You can connect your headphones to the headphones output on your set. While the headphones are connected, the sound from the built-in speakers will be disabled.
x
Sound function may be restricted when connecting headphones to the TV.
x
Headphone volume and TV volume are adjusted separately.
[UD8000-XY]BN68-03444M-00Eng.indb 12
English - 12
2011-05-12 오후 3:53:51
¦ Using an HDMI cable or an HDMI to DVI cable or a D-sub cable
✎
Connecting through the HDMI cable may not be supported depending on the PC.
PC connection
HDMI OUT
DVI OUT
AUDIO OUT
AUDIO OUT
PC OUT
Display Modes (D-Sub and an HDMI to DVI Input)
Optimal resolution is 1920 X 1080 @ 60 Hz.
Mode
IBM
MAC
VESA DMT
Resolution
640 x 350
720 x 400
640 x 480
832 x 624
1152 x 870
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
1920 x 1080p
Horizontal Frequency (KHz)
31.469
31.469
35.000
49.726
68.681
60.023
67.500
63.981
79.976
49.702
62.795
60.000
47.712
31.469
37.861
37.500
37.879
48.077
46.875
48.363
56.476
55.935
70.635
65.290
67.500
Vertical Frequency (Hz) Pixel Clock Frequency (MHz)
70.086
70.087
25.175
28.322
66.667
74.551
75.062
75.029
75.000
60.020
75.025
59.810
74.934
60.000
60.015
59.940
72.809
75.000
60.317
72.188
75.000
60.004
70.069
59.887
74.984
59.954
60.000
30.240
57.284
100.000
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
83.500
106.500
108.000
85.500
106.500
136.750
146.250
148.500 VESA DMT /
DTV CEA
✎
NOTE x
For HDMI/DVI cable connection, you must use the HDMI IN 1 (DVI) jack. x
The interlace mode is not supported. x
The set might operate abnormally if a non-standard video format is selected. x
Separate and Composite modes are supported. SOG (Sync On Green) is not supported.
Sync Polarity (H / V)
+/-
-/+
-/-
-/-
-/-
+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
+/+
+/+
-/-
-/-
-/-
-/-
-/-
+/+
-/+
-/+
-/+
+/+
English - 13
[UD8000-XY]BN68-03444M-00Eng.indb 13 2011-05-12 오후 3:53:51
Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem.
The LAN Port on the Wall
Wireless IP sharer
(router having DHCP server)
TV
LAN Cable
This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE
802.11n. When you play the video over a network connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the network through an access point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code called an access key.
If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or
TKIP AES (WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.
Network Connection - Wired
There are two main ways to connect your TV to your network using cable, depending on your network setup.
They are illustrated below:
The Modem Port on the Wall
External Modem
(ADSL / VDSL / Cable TV)
TV Rear Panel
LAN Cable
The LAN Port on the Wall
Modem Cable
TV Rear Panel
LAN Cable
✎
It is not supported when the network speed is under 10 Mbps.
English - 14
[UD8000-XY]BN68-03444M-00Eng.indb 14 2011-05-12 오후 3:53:52
How to use the e-Manual
E-MANUAL
You can read the introduction and instructions about the TV features stored in your TV.
O
MENU
m → Support → e-Manual →
ENTER
E
✎
If you want to return to e-Manual, press E-MANUAL button on remote.
✎
You cannot use Try Now directly if the TV is set to an external input source.
Screen Display
TV Screen: Displays the current input source screen.
Help: Displays the e-Manual Guide or Product Guide.
Press
ENTER E button.
Help
Change the category. Press l or r button to select category you want.
Basic Features
Changing the Preset Picture Mode
Adjusting Picture Settings
Changing the Picture Size
Changing the Picture Options
Setting up the TV with Your PC
Displays the sub-menu list. Press
ENTER E button to select sub-menu you want.
Index
Index: Displays index screen.
X: Exit the e-Manual.
Using the Help
Display the e-Manual Guide & the Product Guide by pressing Help.
How to use the e-Manual
You can read the introduction and instructions about the TV features stored in your TV.
O
MENU m → Support → e-Manual →
ENTER
E
Basic Features
Changing the Preset Picture Mode
Adjusting Picture Settings
Changing the Picture Size
Changing the Picture Options
Setting up the TV with Your PC
Index Help
Sync media from multiple devices with AllShare
AllShare™ syncs your digital devices so you can enjoy music, movies and photos from your PC, camera and mobile devices, on your larger TV screen. Connects you to multiple PCs, as well.
<e-Manual Guide>
The e-Manual guide appears as above.
Return
<Product Guide>
The product guide appears as above.
Return
How to toggle between the e-Manual and the corresponding menu(s).
Basic Features > Changing the Preset Picture Mode (1/1)
Changing the Preset Picture Mode
■
Picture Mode t
Select your preferred picture type.
N When connecting a PC, you can only make changes to the Standard and Entertain.
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Natural for LED TV / Relax for PDP TV: Suitable for reducing eye strain.
• Movie: Suitable for watching movies in a dark room.
• Entertain: Suitable for watching movies and games.
N It is only available in PC mode.
Try Now
E-MANUAL
Help Try Now Home Zoom Index
Picture
Picture Mode
Cell Light
Contrast
Brightness
Sharpness
Colour
Tint (G/R)
Standard
14
100
45
50
50
G 50 R 50
✎
This function is not enabled in some menus.
English - 15
[UD8000-XY]BN68-03444M-00Eng.indb 15 2011-05-12 오후 3:53:55
Method 1
1. Select Try Now, when you want to execute the corresponding menu(s).
2. To return to the e-Manual screen, press the
E-MANUAL
button.
Method 2
1. Press the ENTER
E button when selecting
Contents Area. The “Are you sure?” is displayed.
Select Yes and then press the ENTER
E button.
The OSD window will be displayed.
2. To return to the e-Manual screen, press the
E-MANUAL button.
Viewing the Contents
Help
Basic Features > Changing the Preset Picture Mode (5/10)
Changing the Preset Picture Mode
O MENU m → Picture → Picture Mode → ENTER E
■
Picture Mode t
Select your preferred picture type.
N When connecting a PC, you can only make changes to the
Standard and Entertain.
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Natural for LED TV / Relax for PDP TV : Suitable for reducing eye strain.
• Movie: Suitable for watching movies in a dark room.
• Entertain: Suitable for watching movies and games.
N It is only available in PC mode.
Try Now Home Zoom Index
Try Now: Displays the corresponding menu(s).
Home: Moves to the e-Manual home screen.
Zoom: Magnifies a screen.
Index: Displays index screen.
Contents Area: You can view the corresponding contents, if you selected a sub-menu. To move previous or next page, press the l or r button.
Using the Zoom mode
When you view the e-Manual instruction, select the
Zoom to magnify the screen. You can scroll through the magnified screen by using the u or d buttons.
✎
To return to the previous screen, press the button.
RETURN
Changing the Preset Picture Mode
O MENU m → Picture → Picture Mode → ENTER E
■
Picture Mode t
Select your preferred picture type.
N When connecting a PC, you can only make changes to the Standard and Entertain.
• Dynamic: Suitable for a bright room.
• Standard: Suitable for a normal environment.
• Natural
for LED TV
/ Relax
for PDP TV
: Suitable for reducing eye strain.
• Movie: Suitable for watching movies in a dark room.
• Entertain: Suitable for watching movies and games.
Return
How to search a keyword by using index page
✎
This function may not be supported depending on the language.
1. If you want to search a keyword, press the u / d / l / r button to select Index.
2. Press the l or r button to select a character order you want.
3. Press the u or d button to select a keyword you want to see, and then press the ENTER E button.
4. You can view the corresponding e-Manual instruction screen.
✎
To close the Index screen, press the
RETURN
button.
English - 16
[UD8000-XY]BN68-03444M-00Eng.indb 16 2011-05-12 오후 3:53:56
Installing the Wall Mount
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.
Preparing before installing Wall-Mount
To install a wall-mount from another manufacturer, use the Holder-Ring.
1
Wall Mount Kit Specifications (VESA)
✎
The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎
NOTE x
Standard dimensions for wall mount kits are shown in the table below.
x
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
x Do not use screws that do not comply with the VESA standard screw specifications.
x
Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.
x
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.
x Do not fasten the screws that are too strongly; this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
x Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
x
Do not mount the TV at more than a 15 degree tilt.
Product Family inches VESA Spec. (A * B) Standard Screw Quantity
LED-TV
19~22
23~27
32~40
46~60
65~75
75 X 75
200 X 100
200 X 200
400 X 400
600 X 400
M4
M8
4
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
English - 17
[UD8000-XY]BN68-03444M-00Eng.indb 17 2011-05-12 오후 3:53:56
Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.
Issues
The TV won’t turn on.
There is no picture/video.
The remote control does not work.
The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume.
Solutions and Explanations
• Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the
POWER
button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “Remote control does not work” below.
• Check cable connections (remove and reconnect all cables connected to the TV and external devices).
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV input. For example, if an external device’s output is HDMI, it should be connected to an
HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.
• Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the sensor’s transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
• Programme the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code.
✎
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce.
However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
✎
You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com
Support
→ Downloads) by USB.
→
License
List of Features
Excellent Digital Interface & Networking: With a built-in HD digital tuner, nonsubscription HD broadcasts can be viewed without a cable box / STB (Set-Top-Box) satellite receiver.
3D
This exciting new feature enables you to view 3D content.
SMART HUB
The Gateway to all content integrated in one place.
• It’s all integrated to guide you to easier and diverse entertainment choices.
• Control your entertainment life with easy and simple user friendly UI.
• Access to diverse Apps that are adding up every day.
• Customize your TV, by App grouping & sorting to your taste.
AllShare™
AllShare™ connects your TV and compatible Samsung mobile phones/devices through a network.
Anynet+(HDMI-CEC)
Allows you to control all connected Samsung devices that support anynet+ with your Samsung TV’s remote.
English - 18
[UD8000-XY]BN68-03444M-00Eng.indb 18 2011-05-12 오후 3:53:57
Securing the TV to the wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious injuries or death. Follow all safety precautions provided in the included Safety
Flyer. For added stability and safety, install the anti-fall device as follows.
To Avoid the TV from Falling
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎
You may need additional material such as an anchor depending on the type of wall.
✎
Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.
2. Remove the screws from the back centre of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.
✎
Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.
✎
Screw Specifications x
For a 19 ~ 27 inch: M4 x For a 32 ~ 75 inch: M8
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall with a strong cable and then tie the string tightly.
✎
NOTE
Wall x Install the TV near to the wall so that it does not fall backwards.
x
It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.
x
Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure. If you have any doubt about the security of your connections, contact a professional installer.
Storage and Maintenance
✎
If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.
Do not spray water or a cleaning agent directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock.
Clean the product with a soft cloth dapped in a small amount of water.
English - 19
[UD8000-XY]BN68-03444M-00Eng.indb 19 2011-05-12 오후 3:53:57
Specifications
Display Resolution
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
TV System
Colour/Video System
Sound System
HDMI IN
1920 x 1080
10°C to 40°C (50°F to 104°F)
10% to 80%, non-condensing
-20°C to 45°C (-4°F to 113°F)
5% to 95%, non-condensing
Analogue: B/G, D/K, L, I (Depending on your country selection)
Digital: DVB-D
Analogue: PAL, SECAM, NTSC-4.43, NTSC-3.58, PAL60
Digital: MPEG-2 MP@ML, MPEG-4, H.264/AVC MP@L3, [email protected], [email protected]
BG. OK NICAM. MPEGl
Video: 1080 24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i
Audio: 2Ch Linear PCM 32/44.1/48kHz, 16/20/24bits.
UA40D8000
40 inches
-20˚ ~ 20˚
UA46D8000
46 inches
UA55D8000
55 inches
Stand Swivel (Left / Right)
Model Name
Screen Size
Sound
(Output)
Dimensions (WxDxH)
Body
With stand
Weight
Without Stand
With Stand
908.6 X 29.7 X 524.9 mm
908.6 X 241.3 X 600.0 mm
10 W X 2
1041.1 X 29.7 X 599.4 mm
1041.1 X 276.5 X 607.5 mm
15 W X 2
1232.6 X 29.7 X 707.2 mm
1232.6 X 309.3 X 789.7 mm
10.0 kg
11.3 kg
12.4 kg
14.3 kg
16.2 kg
18.6 kg
✎
Design and specifications are subject to change without prior notice.
✎
For information about power supply, and more about power consumption, refer to the label attached to the product.
[UD8000-XY]BN68-03444M-00Eng.indb 20
English - 20
2011-05-12 오후 3:53:58
advertisement
Key Features
- 3D capability for an immersive viewing experience
- Smart Hub for easy access to a wide range of online content
- QWERTY remote control for convenient navigation and text input
- Full HD 1080p resolution for sharp and detailed picture quality
- Wide Color Enhancer Plus for vibrant and lifelike colors
- Clear Motion Rate 800 for smooth and blur-free action sequences
- Built-in Wi-Fi for wireless connectivity to the internet and home network
- USB ports for connecting external storage devices and playing multimedia content
- HDMI ports for connecting high-definition devices like Blu-ray players and gaming consoles