Vulcan-Hart Wallmnt-Chrbkr Installation instructions

INSTALLATION INSTRUCTIONS

MODEL WALLMNT-CHRBKR WALL MOUNT BRACKETS

These brackets will work with all sizes of the following models:

Wolf Vulcan

RB salamanders VSB salamanders

IRB salamanders VCM cheesemelters

CMJ cheesemelters

1. Follow the combustible/noncombustible

clearance guidelines that are listed in the

“Installation” section for the installation and

operation manual of the unit you are

installing.

2. Make sure brackets are level and properly

spaced so that bracket holes will align with

the threaded holes on the bottom of the

unit to be mounted.

3. Secure brackets to wall by means of lag

screws or bolts.

4. Mount the brackets only in the upside-down

“L” position as shown.

5. Make sure the lag bolts or screws engage

wall studs.

6. Place unit into position on the brackets,

making sure that the unit’s bottom threaded

holes are aligned with the holes in the

brackets.

7. Secure unit into position with 3/8” bolts at the

bottom of the unit through the holes in the

brackets.