Westinghouse VR-3250DF User Guide
Add to my manuals30 Pages
Westinghouse VR-3250DF is a 32-inch LCD TV with a 1366x768 resolution. It has a built-in DVD player, so you can watch your favorite movies and TV shows without having to connect an external device. The TV also has a USB port, so you can connect a USB drive and watch movies, listen to music, or view photos. The TV also has a built-in tuner, so you can watch over-the-air TV channels. The TV comes with a remote control, so you can easily navigate the menus and adjust the settings.
advertisement
1
2
3
I M P O R T A N T
INFORMATION
HOW TO INSTALL
THE STAND
PREFACE
4
5
6
SAFETY
PRECAUTIONS
CONTENTS
FRONT/BACK
CONNECTIONS
OF LCD TV
7 TV INSTALLATI ON
8 REMOTE CONTROL
9 MENU OPERATION
10 TROUBLESHOOTING
11 SPECIFICATIONS
Power Cord Connection
Antenna Connection
AV Connection
YPbPr (c omponent ) Connection
VGA ( PC ) Connection
Service Port Function
HDMI Connection
Remote control instructions in TV mode
Remote control setup
SETUP WIZARD
Operating the Menu
PICTURE Menu
AUDIO Menu
TIME Menu
SETUP Menu
LOCK Menu
CHANNEL Menu
TABLE OF CONTENTS
2
4
5
5
7
8
13
14
19
19
20
22
24
15
17
18
11
11
12
9
9
10
10
26
27
1
IMPORTANT INFORMATION
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric to persons.
The exclamation point within an equilateral triangle is interded to aler the user to the presence of important operating and maintenance (servicing) instruction the literature accompanying the appliance.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Refer to service manual for servicing instructions.
2
Important Safety Instructions
Note:
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
IMPORTANT INFORMATION
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11.Only use attachments / accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15
.
Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, suchas vases, shall be
placed on the apparatus.
16.WARNING:To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
17.Mains plug or appliance coupler is used as the disconnect device, shall be readily operable.
18.The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
3
HOW TO INSTALL THE STAND
4
1. Attach the base cover to the fixed-ring base ; image 1
Limit
2. Screw the base cover to fixed-ring base; image 2
Screw holes
Front
Base cover
Screws image 3
PREFACE
3. PREFACE
Thank you for buying this TV!
Please read this manual thoroughly before operating the TV.
Make sure the TV was not damaged in transit. Should the TV be damaged, do not install it and contact your dealer. Check that you have all the accessories according to the model.
4. SAFETY PRECAUTIONS
Put the TV on a stable surface.
Do not place any material on the TV.
20cm
Minimum distances
10cm 10cm 5cm
Do not use the TV with fixtures other than those provided or suggested by the manufacturer.
Do not block or cover the ventilation openings on the TV.
If you have a wall mount, check that it is steady.
Power cord and cables must be properly routed and protected to prevent people from stepping on them and causing the TV to fall.
5
SAFETY PRECAUTIONS
Keep the TV dry and away from humidity.
Keep the TV away from heat sources.
Unplug the TV before cleaning it. Do not use solvent or liquid to clean the TV.
Only clean the TV with a soft and dry cloth.
In case of troubleshooting, do not use spare parts other than those
suggested by the manufacturer. Using inadequate spare parts can
lead to electric shocks, short-circuits, fire or other incidents.
Unplug the TV during lightning storms or when unused for long periods
of time.
6
CONTENTS
5. CONTENTS
LCD TV SET
Power Cable
USER
'
S MANUAL
Warranty Card
Warranty Card
Remote Control
1.5V
1.5V
AAA Batteries
Quick Connect Guide
Quick Connect Guide
7
FRONT/BACK CONNECTIONS OF LCD TV
6. FRONT/BACK CONNECTIONS OF LCD TV
Front View
5
4
3
2
1
1. Press“POWER” button to turn the TV on or off.
2. Press“SOURCE”to select the input source.
3. Press “MENU”to bring up the main menu on
the screen.
4. Press“CH+”or “CH-”to scan through channels.
5. Press“VOL+”or “VOL-”to increase or decrease
the volume.
6. POWER INDICATOR: Shows red in standby mode.
Shows red or green when your TV is switched on.
7. REMOTE SENSOR: infrared sensor for the
remote control.
6
7
Back View and Control Connections
1.AC IN: Main power input.
2.USB Service: USB port for Factory Use Only.
3.HDMI1 / HDMI2: Connect to the HDMI output jack
of a DVD player.
4.VGA (PC): Connect to the VGA RGB output jack
of a PC.
5.PC AUDIO: Connect to the Audio output jack of a PC.
6.COMPONENT: Connect to the YPbPr output jack
of a DVD or VCR player.
7. AV: Connect to the Video output jack of a DVD or
VCR player.
8.AUDIO IN: Connect to the Audio output jack of a
DVD or VCR player.
9.RF IN: Connect to an antenna or cable source.
10.HEADPHONE: Connect to a headphone.
8
AC IN
1 2 3 4 5 6 7 8 9 10
Power Cord Connection
- Connect the power cord correctly as shown.
- Press the POWER switch of your LCD TV to switch on the LCD TV. The power indicator on the front panel lights up in red or green.
AC IN
Antenna Connection
To ensure good picture and sound, TV antenna system needs to be installed. The antenna system as shown can be sourced from TV equipment shops, which will provide service for correct installation and connection. After installation, insert the 75-ohm antenna plug into the antenna jack as shown.
VHF ANTENNA UHF ANTENNA
OUTDOOR
ANTENNA
AMPLIFIER
INDOOR
ANTENNA
AMPLIFIER
POWER PLUG OF
ANTENNA
AMPLIFIER
75 OHM
ANTENNA
PLUG
9
10
AV Connection
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the VIDEO jacks on the set using the RCA cable. Match the jack colors: Video is yellow, Audio left is white, and Audio right is red.
Select the AV input source using the SOURCE button on the remote control.
AC IN
TV Back
Video Cable
VIDEO L
DVD or VCR Back
DVD or VCR
YPbPr (Component) Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set. The picture quality is improved; compared to connecting a regular VCR to the video input. Connect the Audio output of the DVD or VCR to the Audio input jacks on the set using the RCA cable.
Match the jacks colors :Y is green,Pb is blue,Pr is red,Audio left is white and Audio right in red.
Select component input source using the SOURCE button on the remote control.
AC IN
AUDIO cable
TV Back
YPbPr cable
Y Pb Pr L R
DVD or VCR Back
DVD or VCR
VGA(PC) Connection
Connect the RGB output of the PC to the VGA(PC) jack on the set. Connect the AUDIO output of
The PC to the PC AUDIO jack on the set. Select the RGB input source with using SOURCE button on the remote control.
AC IN
TV Back
VGA Cable
Audio Cable
AUDIO RGB-PC OUTPUT
Service Port Function
Service port: (For factory uses only.)
TV Back
USB Cable
11
12
HDMI Connection
HDMI plug which replaces the HDMI connection allows transfer of all audio/video/control signals through one cable only. These signals are transferred in digital.
AC IN
TV Back
HDMI Cable
DVD Back
REMOTE CONTROL
Remote control instructions in TV mode
POWER
Turn the LCD TV ON or OFF.
MUTE
Press to mute the sound. Press again or press VOL+ to un-mute the TV.
NUMBER BUTTONS
Press 0-9 to directly change the TV channel.
SOURCE
Press SOURCE to display the OSD input source,
OK to confirm.
-
Press this button to enter a program number for multiple program channel such as 2-1,etc.
Return to the previous channel viewed.
DISPLAY
Press to display the source and channel's information.
MENU
Brings up the main TV menu to the screen.
EXIT
Exit the main TV menu to the screen.
ASPECT
Press to select Aspect Ratio.
THUMBSTICK( ▲/ ▼/◄ / ►/ OK )
Allows you to navigate the on-screen menus and adjust the system settings to your preference.
VOL+/VOL-
Press to increase / decrease the sound level.
CH+/CH-
Press to scan through channels.
CC
Press to display the closed caption.
LIST
Press to display the TV program list.
FAV
Press to display the TV favourite program list.
MTS
Press to adjust between available audio channel.
13
REMOTE CONTROL
Remote control setup
1. Open the cover.
2. Uses AAA size batteries.When inserting the batteries, make sure correct polarities “+”and “-”
3. Replace the battery cover.
To prevent battery leakage which may result in bodily injury or damage to the remote:
1. Install all batteries correctly, and as marked on the remote control.
2. Do not mix batteries:(OLD and NEW or CARBON and ALKALINE, etc)
Remove batteries when the remote is not used for a long period of time.
14
MENU OPERATION
9.Menu Operation
SETUP WIZARD
Select Language
Select Language
Follow this guide to help you set up your TV Use The Up and Down arrows on your remote control and select the Language you want to use for menus and message screens.
English
French
Spanish
Enter:Confirm
:Select
Time zone
Time Zone
Use The Up and Down arrows and press Select on your
Time Zone.
Go Back
:Select
Hawail(UTC-10)
Alaskal(UTC-9)
Pacific(UTC-8)
Mountain(UTC-7)
Central(UTC-6)
Eastern(UTC-5)
Enter:Confirm
Setup Wizard
Power Up Mode
Choose this setting for optimal performance under every day use.
Go Back
:Select
Home Use
Retall Use
Enter:Confirm
Setup Wizard
Please follow the Setup
Wizard to scan and store channels. You can perform the scan later if you choose to skip.
Go Back
:Select
ENTER
Skip
Enter:Confirm
Enter
Channel Scan
Please choose what type of device to set up ? If you want to set up a DVD , Game
Console or Computer please choose other and select what connection you are using .
Go Back
:Select
Source List
Skip
Go Back
:Select
Antenna
Cable
Satellite
Other
Enter:Confirm
TV
AV
Component
HDMI1
HDMI2
VGA
Enter:Confirm
15
MENU OPERATION
Channel Scan
Channel Scan
Please choose what type of device to set up ? If you want to set up a DVD , Game
Console or Computer please choose other and select what connection you are using .
Go Back
Antenna
Cable
Satellite
Other
:Select
Cable/Satellite Select
Cable
Enter:Confirm
Are you using a
Cable/Satellite Box to
Connect to your TV?
Go Back
Yes
No
Exit Setup
:Select Enter:Confirm
Antena
A
A
Obtain Tuner Activation Code
Serial Number: XXXXXXXXXXXXX
An Activation Code is necessary to properly scan and access your Cable channels.
This Activation Code is available at no charge and can be obtained using the above Serial Number in either of the following ways:
>Voicemail-Call 1-800-701-0680 - follow voice instruction.
>Online - Go to www.wed.com/support and select Cable
Clear Qam Tuner Activation.
Go Back Next
:Select Enter:Confirm
Enter Activation Code
Go Back
Enter:Confirm 0 ~ 9 : Key in password
Cable/Satellite Box Input
What connection are you using? For Optimal Video
Quality We Recommend HDMI or component.(Refer
to Quick Connect Guide or User Manual to help
you determine what connection you are using.)
HDMI1 HDMI2 Com po nen t Coaxial
Skip Go Back
:Select
Enter:Confirm
Scan Stoped
You have stopped the channel scan before it could
complete. Do you wish to adjust your RF input Source
and repeat the scan, or watch
TV with the channels that
have been found?
Repeat
Watch TV
Enter:Confirm
:Select
RF Warning
Note: We don’t recommend RF as your connection because it will provide very poor video signal to your TV and video quality will look very poor. Go back and use a different
Cable Box that provide High Definition quality signals we recommend you call your cable provider ask for an upgrade
Exit Setup Proceed Skip
Go Back
:Select
Enter:Confirm
A
Error message
No TV Channels Found
The Setup Wizard did not find any channels. Check your antenna or cable connections. You may have selected an improper RF
Input Source. Check your setup and try again.
Repeat
No Cable Channels Found plugged in, and check the settings of the Cable Box! Press the
Proceed again to re-scan.
Exit Setup Proceed
:Select
Skip
Go Back
Enter:Confirm
:Select
Enter:Confirm
16
MENU OPERATION
1.Press the POWER button to turn the LCD TV on.
2.Press the MENU button on the remote control, the on-screen menu will appear on the screen.
3.Use the LEFT and RIGHT buttons to select your main menu option.
PICTURE MENU:
Allows you to make adjustments to your picture settings.(select TV source for example)
AUDIO MENU:
Allows you to customize the audio options and effects.(select TV source for example)
Picture Audio
Picture Mode
Contrast
Brightness
Color
Sharpness
Color Temp.
12
6
Time Setup
Standard
Lock Chann el
Normal
12
Picture Audio
Sound Mode
Bass
Treble
Balance
Surround
Audio Language
6
Time Setup
Standrad
Lock Chann el
Of f
English
Select Move MENU Exit
TIME MENU:
Allows you to set up a variety of timer options.
(Select TV source for example)
12
Picture Audio
6
Time
Sleep
Time Zone
Daylight Saving Time
Clock
Setup Lock
Off
Pacific
Off
2010/07/10 11:50
Channel
Select Move MEN U Exit
SETUP MENU:
Allows you to set up a variety of setup options.
(Select TV source for example)
12
Picture Audio
Menu Language
Zoom Mode
Noise Reduction
PC Setup
Close Caption
DLC
Restore Default
6
Time
Setup
En gli sh
Norma l
Of f k
Lock Channel
On
Select
Select
Move MEN U Exit
LOCK MENU:
Allows you to set up a variety of lock options.
(Select TV source for example)
12
Picture Audio
Change Password
System Lock
US
Canada
RRT Setting
Reset RRT
6
Time Setup Lock Channel
On
Move MEN U Exit
Select Move
CHANNEL MENU:
Allows you to search channels and set up a variety of channel options.
(Select TV source for example)
Picture Audio
Air/Cable
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal
12
6
Time Setup
Air
Lock Channel
11-1
50-3
MBC DTV
Go od
Select Move
MEN U Exit
MEN U Exit
17
MENU OPERATION
4.Use the UP/DOWN buttons to select an option of the sub-menu, and press the RIGHT button.
While in adjustment mode, use the LEFT/RIGHT button to change the value of the item.
5.Press the MENU button to exit the menu.
Note:
Only when you input the suitable signal, the relevant items can be activated.
1.Press the POWER button to turn the LCD TV on.
2.Press the MENU button on the remote control, the on-screen menu will appear on the screen.
3.Use the LEFT and RIGHT buttons to select your main menu option.
Select TV source for example.
1. Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT buttons to select the PICTURE.
2. Use the UP and DOWN buttons to highlight an individual
PICTURE option, use the LEFT and RIGHT buttons to change the setting, and press the MENU to exit the menu.
Picture Audio
Picture Mode
Contrast
Brightness
Color
Sharpness
Color Temp.
12
6
Time Setup
Standard
Lock Chann el
Normal
Select
The PICTURE menu includes the following options :
Picture Mode
Cycles among picture display modes: Standard, Dynamic, Movie, User.
Contrast
Controls the difference between the brightest and darkest regions of the picture.
Brightness
Controls the overall brightness of the picture
Color
Control the color.
Sharpness
Increase this setting to see crisp edges in the picture; decrease it for soft edges .
Color Temp.
Cycles among color temp: Standard, Fill, Overscan.
Move MENU Exit
18
MENU OPERATION
Select TV source for example.
1. Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT buttons to select the AUDIO.
2. Use the UP and DOWN buttons to highlight an individual
AUDIO option, use the LEFT and RIGHT buttons to change the setting, and press the MENU to exit the menu.
12
Picture Audio
Sound Mode
Bass
Treble
Balance
Surround
Audio Language
6
Time Setup
Standrad
Lock Chann el
Of f
English
Select
The AUDIO menu includes the following options :
Sound Mode
Allows you to select among: Standard, Music, Movie, Personal, User and Sports.
Bass
Controls the relative intensity of lower pitched sounds.
Treble
Controls the relative intensity of higher pitched sounds
Balance
To adjust the balance of the left and right sound track, or turn off the volume of the left and right sound track.
Surround
Use the LEFT and RIGHT buttons to select on or off.
Audio Language
Allows you to select audio languages among: English, French and Spanish.
Move MEN U Exit
Select TV source for example.
1. Press the MENU button on the remote control to display the Main menu, and use the UP and DOWN buttons to select the TIME.
2. Use the UP and DOWN buttons to highlight an individual
TIME option, use the LEFT and RIGHT buttons to change the setting, and press the MENU button to exit.
12
Picture Audio
6
Time
Sleep
Time Zone
Daylight Saving Time
Clock
Setup Lock
Off
Pacific
Off
2010/07/10 11:50
Channel
Select Move
MEN U
Exit
19
MENU OPERATION
The TIMER menu includes the following options :
Sleep Timer
Allows you to set up the sleep timer among: 5min, 10min, 15min, 30min, 45min, 60min, 90min,
120min, 180min, 240min and off.
Time Zone
Allows you to set up the sleep timer among: Pacific, Alaska, Atlantic, Hawaii, Eastern, Central and
Mountain.
Daylight Saving Time
Allows you to turn on or off the daylight saving time.
Clock
Display the current time.
Select TV source for example.
12
Picture Audio
Menu Language
Zoom Mode
Noise Reduction
PC Setup
Close Caption
DLC
Restore Default
6
Time Setup
En gli sh
Norma l
Of f k
Lock
On
Channel
1. Press the MENU button on the remote control to display the Main menu, and use the LEFT or RIGHT button to select the SETUP.
2. Use the UP and DOWN buttons to highlight an individual
SETUP option, use the LEFT and RIGHT buttons to change the setting, and press the MENU button to exit.
Select Move MEN U Exit
The SETUP menu includes the following options:
Menu Language
Allows you to select menu language among: English, Français and Español.
Transparency
Allows you turn on or off the transparency function.
Zoom Mode
Allows you to select the zoom mode among: Normal,
Cinema, Wide and Zoom.
Noise Reduction
Allows you to select the noise reduction mode among:
Picture
H-POS
V-POS
Clock
Phase
Auto
Audio
12
6
Time Setup Lock
Strong, Off, Weak, Middle.
PC Setup (In VGA Mode only)
20
Input PC signal first, then press SOURCE button to select
Select Move
MEN U
VGA mode, press RIGHT button to confirm.
H-Position Allow you to use LEFT and RIGHT button to adjust the H Position.
V-Position
Clock
Allow you to use LEFT and RIGHT button to adjust the V Position.
Allow you to prolong the image.
Phase Allow you to adjust the definition.
Auto Select “Auto”and press RIGHT, the unit will automatically adjust all items
Exit to achieve a best effect.
Channel
MENU OPERATION
Close Caption
Use Down button to highlight the Close Caption item, then press RIGHT button to enter into the following menu.
CC Mode
Allows you to select the CC Mode among: On, Off and CC on Mute.
Basic Selection
Allows you to select the basic selection among:
CC1, CC2,CC3, CC4, Text1, Text2, Text3 and Text4.
Advanced Selection
Allows you to select the advanced selection among:
Service1, Service2, Service3, Service4, Service 5 and, Service 6.
12
Picture Audio
CC Mo de
Basic Selection
Advanced Selection
Opti on
6
Time Setu p Lo ck
On
CC 1
Service 1
Ch annel
Move Select
MENU
Exit
Option
Use Down button to highlight the “Option”item, then press RIGHT button to enter into the following menu.
12
Pic ture Audio
Mode
Font Style
Font Size
Font Edge Styl e
Font Edge Color
FG Color
BG Co lor
FG Opacit y
BG Opacit y
6
Time
Move Select
Setup Lock
Custo m
Defau lt
Defau lt
Defau lt
Defau lt
Defau lt
Defau lt
Defau lt
Defau lt
Channel
MEN U Exit
Use UP and DOWN buttons to highlight the desired item, and use LEFT and RIGHT buttons to select.
DLC
Dynamic luminance control ON or OFF .
Restore Default
Restores all settings to factory settings.
Pictu re Audio
12
6
T i m e Setu p L o c k Chan nel
Ar e you su re
No Yes
Move Select MEN U Exit
21
MENU OPERATION
Select TV source for example.
1. Press the MENU button on the remote control to display the Main menu, and use the LEFT and
RIGHT buttons to select the LOCK
2. Use the DOWN button to highlight the “Enter Password”item, use the numeric keys to input
4-digital password, then the screen will display the junior menu. After settings, press menu button to exit.
NOTE: The factory password is 0000.
Picture Audio
Enter Password
12
6
Time Setup Lock Channel
input
4-digital password
12
Picture Audio
Change Password
System Lock
US
Canada
RRT Setting
Reset RRT
6
Time
Setup
Lock Channel
On
0~9
MEN U
Exi t Select Move
MEN U
Exit
The LOCK menu includes the following options :
Change Password
Use DOWN button to select the “Change Password” item, then press RIGHT button to enter into the following menu.
Input the new 4-digital password and input it again to confirm.
System Lock
Allows you to turn on or off the system lock.
If you turn off the system lock, then the following items
(US, Canada, RRT Setting and Reset RRT) will unable to use.
US
Use Down button to highlight the “US”item, then press
RIGHT button to enter into the following menu.
12
Audio
6
Time
Enter New Password
Confirm Password
Setup Lock Channel
0~9 MEN U Exit
Pictur e
TV
MPAA
Audio
12
6
Time Setu p Lo ck Ch ann el
N A
Mov e Selec t MEN U Exi t
22
MENU OPERATION
TV
Use Down button to highlight the “TV”item, then press RIGHT button to enter into the following menu.
Pictur e Audio
TV Y
TV Y7
TV G
TV PG
TV 14
TV MA
Bloc k
AL L
Select
12
6
Time Setu p
TV RATING
FV V S
Lo ck
L
Ch ann el
D
Press OK to Lock or Unlock
Move MEN U Exit
Use UP and DOWN buttons to select the desired rating and press RIGHT button to block or unblock rating.
MPAA
The Movie rating (MPAA) is used for original movies rated by the Motion Picture Association of America
(MPAA) as broadcasted on cable TV and not edited for television.
Use UP or DOWN button to select N/A, G, PG, PG-13, R, NC-17 or X.
RATING DESCRIPTION
G General Audiences. Movie is appropriate for all ages.
PG Parental Guidance Suggested. May contain material not suited for
younger viewers.
PG-13 Contains content that may not be appropriate for viewers under the
age of 13.
R Restricted. Contains adult content, no one under 17 admitted without
parent.
NC-17 No one 17 and under admitted.
X Adults only.
Canada
Use Down button to highlight the “Canada” item, then press
RIGHT button to enter into the following menu.
Canada Eng
Use LEFT and RIGHT buttons to select among: E,
C, C8+, G, PG, 14+ and 18+
Canada Fre
Use LEFT and RIGHT buttons to select among: E,
G, 8ans+,13ans+, 16ans+ and 18ans+
RRT Setting
Rating Region Table seting.
Reset RRT
Allows you to reset the RRT setting.
12
Pic tur e Audio
Ca nada English
Ca nada French
6
Time Setup
E
E
Lock Channel
Select Move MENU Exit
23
MENU OPERATION
Select TV source.
1. Press the MENU button on the remote control to display the Main menu, and use the LEFT and RIGHT buttons to select the CHANNEL.
2. Use the UP and DOWN buttons to highlight an individual
CHANNEL option, use the LEFT and RIGHT buttons to change the setting, and press the MENU button to exit.
Picture Audio
Air/Cable
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
TV Signal
12
6
Time
Select Move
Setup
Air
Lock Channel
50-3
KOCE-Lb
Go od
MEN U Exit
The CHANNEL menu includes the following options :
Air/Cable
Allows you to select antenna between Air and Cable.
Use Down button to highlight the “Auto Scan” item, then press RIGHT button to enter into the following menu.
Picture Audio
Cable System
Start to Scan
12
6
Time
Setup
Auto
Lock Channel
If you select “Air”as input signal in Antenna item, you can press RIGHT button to search the channels automatically.
Select Move
MEN U
Exit
Picture Audio
12
6
Time Setup Lock Channel
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
RF CH:
Found :
7
4
If you select “Cable”as input signal in Antenna item, allows you to select Cable System among: Auto, STD, IRC and HRC.
Use DOWN button to highlight the “Start to Scan”, then press
Select Move
RIGHT button to search the channels automatically.The receivable channels will be stored automatically. When searching channels, press MENU to stop.
MENU Exit
24
MENU OPERATION
Favorite
Allows you to add these channels which you desired as the favorite channels.
Use UP or DOWN button to highlight the “Favorite”item, then press RIGHT button to enter into the following menu.
Use UP and DOWN button to highlight the desired item, then press OK button to add or remove the highlighted channel as favorite.
12
Picture
Channel
Audio
6
Time Setup
Channel Name
4-0
8-0
11-0
14-0
MBC DTV
Lock Channel
Favorite
Select Press ‘OK’ change
MEN U Exit
Show / Hide
Allows you to show or hide the channels.
Use UP or DOWN button to highlight the “Show / Hide” item, then press RIGHT button to enter into the following menu.
Use UP and DOWN button to highlight the desired item, then press OK button to show or hide the highlighted channel.
Channel No.
Display the number of current channel.
Channel Label
Display the lable of current channel.
TV Signal
Display the quality of current TV signal.
12
Picture
Channel
Audio
6
Time
Setup
Channel Name
4-0
8-0
11-0
14-0
MBC DTV
Lock Channel
Show
Select Press ‘OK’ change
MEN U Exi t
25
10. Troubleshooting
Please check if you can solve problems by troubleshooting yourself.
TROUBLESHOOTING
Troubleshooting
No signal
Control
Please check that all cables are correctly plugged in.
No color shades
Stain on the
screen
Double or multiple display image
Adjust the contrast, the color and the brightness.
May be the result from a lighting signal from car, motor, neon light and other electrical devices or appliances.
May be the result of an electrical wave disturb from other TV,
Computer and Game machine or Radio.
The cables of the antenna are not correctly plugged in.
Snow on the screen
The remote control
does not work
"Zip" made noise on
TV cover
No sound
Please check the batteries order and alignment. Check that the IR of the remote control is not hidden by something.
Even if the display image is correct, the noise may come from an unsteady fixation of the panel.
Make sure that you have not press the MUTE button of the panel or of the remote control.
26
SPECIFICATIONS
11. SPECIFICATIONS
This manual is only for your reference, any change to the design and specification will not be advised.
Screen Size
Display Type
Resolution(Pixel)
Aspect Ratio
Power Supply
Power Consumption
TV System
Video Input Format
Audio Output Power
ANTENNA
AV-IN
YPbPr - IN
HDMI - IN
VGA(PC) - IN
VGA(PC) AUDIO - IN
SCART - IN
SCART - OUT
HEADPHONE - OUT
S-VIDEO - IN
COAXIAL - OUT
COMMON INTERFACE
USB
DVD
Dimensions
Weight
IPOD
Disc Physical Format
DVD Video Output Format
Inc Stand (LxWxHmm)
Exc Sand (LxWxHmm)
Net (Kgs)
Gross (Kgs)
31.5 Inch
TFT LCD
1366 X 768
16:9
AC110-240V 50/60Hz
140W
ATSC/NTSC
PAL/NTSC
L / R 2X8W
YES
YES
YES
YES
YES
YES
--
--
YES
--
--
--
Service Port Only
--
--
--
782x232x555mm
782x109x502mm
9 .
3
12
27
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project