HubWay ®LD16Di Active UTP Transceiver Hub with Integral


Add to my manuals
2 Pages

advertisement

HubWay ®LD16Di Active UTP Transceiver Hub with Integral | Manualzz

HubWay

®

LD16Di Active UTP Transceiver Hub with

Integral Isolated Camera Power

Rev. DSHubWayLD16Di_05192014

Overview

HubWayLD16Di Active UTP Transceiver Hub with Integral

HubWayLD16Di data and power over a single CAT-5 or higher structured cable.

Unit provides 16 camera channels in a space saving 1U EIA 19”

rack mount chassis which may be rack, wall or shelf mounted.

Video transmission range is up to 3000 ft. max. per channel. Units are compatible with AC and/or DC fixed or PTZ cameras when utilizing Altronix HubWayAv,

HubWayDv or HubWayDvi Video Balun/Combiners. In addition, the unit features individually selectable 24VAC or 28VAC fuse protected outputs with surge suppression. An optional HubSat4D Passive UTP Transceiver Hub with Integral

Isolated Camera Power can be used as an accessory module to transmit video from up to 4 cameras over a single CAT-5 or higher structured cable back to the

HubWayLD16Di. In addition, the HubSat4D provides power to these cameras locally to eliminate the possibility of voltage drop associated with long cable runs.

Input:

• 115VAC 50/60Hz, 1.5 amp

or 230VAC 50/60Hz, 1 amp.

• Primary fuse (internal) is rated at 5 amp/250V.

Video:

• Sixteen (16) channels of video over twisted pair

up to a distance of 3000 ft. (914.4m) per channel.

• Sixteen (16) 75 ohm video outputs.

Data:

• RS422/RS485 data inputs.

Power:

Visual Indicators:

• AC input power indicator.

• Video signal and power LED indicators.

Specifications

Features:

• Picture and Gain control.

• Individually selectable 24VAC or 28VAC power

outputs with OFF position.

• Electronically isolated camera power.

• Unit provides up to 1 amp max. per channel not to

exceed a total of 10 amp (300VA) maximum current.

• Class 2 Rated power-limited outputs.

• PTC protected outputs are rated @ 1 amp

per channel.

• Surge suppression.

• Illuminated master power disconnect circuit breaker

with manual reset.

• IEC 320 - 3-wire grounded line cord (detachable).

• Unit can be rack, wall or shelf mounted.

• 1U EIA 19” rack mount chassis.

Accessories:

• Optional HubSat4D allows transmission of up to

four (4) video signals over a single CAT-5 or higher

structured cable.

• Video Balun/Combiners:

- HubWayAv2 - for use with 24VAC cameras.

- HubWayDv - for use with 12VDC cameras.

- HubWayDvi - for use with 12VDC

cameras without isolation.

Mechanical:

• Modular 1U standard EIA 19” rack mount chassis

• Enclosure Dimensions (H x W x D approx.):

1.625” x 19.125” x 8.5”

(41.275mm x 486mm x 215.9mm)

- HubWayLD8Di: 13.5 lbs. (6.12kg)

- HubWayLD82Di: 23.55 lbs. (10.68kg)

- HubWayLD83Di: 24.55 lbs. (11.14kg)

Models

HubWayLD16Di

Active UTP Transceiver Hub with Integral Isolated

Camera Power. Video Balun/Combiners not included.

HubWayLD163Di

Active UTP Transceiver Hub with Integral Isolated

Camera Power and sixteen (16) HubWayDv Video

Balun/Combiners.

HubWayLD162Di

Active UTP Transceiver Hub with Integral Isolated

Camera Power and sixteen (16) HubWayAv Video

Balun/Combiners.

Agency Approvals

UL Listed for Commercial CCTV Equipment

(UL 2044).

CUL Listed - CSA Standard C22.2 No.1-04,

Audio, Video and Similar Equipment.

Video Balun/Combiners

HubWayAv2 - Slim-line Video Balun/Combiner compatible with all HubWay UTP Hubs for AC or DC fixed cameras or PTZs.

Cat5 back to

HubWay or

HubSat

Power to Camera

Data to Camera

HubWayDv - Video Balun/Combiner compatible with all HubWay UTP Hubs for DC fixed cameras or PTZs.

VIDEO Commercial

CCTV Accessory

3C03

HubWayDv

VIDEO BALUN/COMBINER

Refer to the HubWay Video Balun/Combiner

Installation Guide Rev. 123008

RJ45

DATA

+ --

12VDC

-- +

HubWayDvi - Video Balun/Combiner built-in isolation. Compatible with all HubWay

UTP Hubs for DC fixed cameras or PTZs. With or without internal isolation.

RJ45 Jack

Wire

Connectors

To BNC

Connector of Camera

Structured

Cable from

HubWayH16

Red

Power LED

+ 12VDC Power

--- to Camera

--- Data

+ to Camera

Enclosure Dimensions

(H x W x D approximate)

:

1.625” x 19.125” x 8.5” (41.275mm x 486mm x 215.9mm)

Video from Camera

1.625"

41.28mm

16 15 14 13 12 11 10 9

PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE GAIN

17.625"

447.67mm

8 7 6 5 4 3 2 1

PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE GAIN PICTURE GAIN AC POWER

8.5"

215.9mm

1 2 3 4 CH 1-4 5 6 7 8 CH 5-8

28VAC

OFF

24VAC

19.125"

485.78mm

9 10 11 12 CH 9-12 13 14 15 16 CH 13-16

28VAC

OFF

24VAC

0.75"

19.05mm

Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement