Touch HMI

CMYK
Touch HMI
A Balanced Choice
A U T O M A T I O N
P E O P L E
MESSUNG SYSTEMS
MANUFACTURER OF PLCs, RIOs & HMIs
Kohinoor House, EL-2, J Block, M.I.D.C. Bhosari, Pune - 411 026. India
Tel. : +91(020) 27102000 / 27102125 Fax: +91(020) 27102100
Email: [email protected] Website: www.messung.com
AREA DISTRIBUTORS
PUNE
MESSUNG SYSTEMS
TEL:+91(20)27123130
27128927
FAX:+91(20)27128108
NAGPUR
TELEFAX: +91(712) 2284020
MUMBAI
MESSUNG SYSTEMS
TEL:+91(22)26674308
66949564
FAX:+91(22)26674309
BANGALORE
MESSUNG SYSTEMS
TEL:+91(80)41732564
41732592
FAX:+91(80)41320758
NEW DELHI
MESSUNG SYSTEMS
TEL:+91(11)29216128
29226129
FAX:+91(11)29226130
HYDERABAD
MESSUNG SYSTEMS
TEL:+91(40)27722519
27720308
FAX:+91(40)27722519
BARODA
MESSUNG SYSTEMS
TEL:+91(265)2314699
2358137
FAX:+91(265)2333307
COIMBATORE
MESSUNG SYSTEMS
TEL:+91(422)4385606
SERVICE CENTRE
AHMEDABAD
Document No.: Released -001/1000/05/2008
CMYK
FAX:+91(422)4385606
BANGALORE
LEONARDO AUTOMATION
TEL:+91(80)23287161
23283030
FAX:+91(80)23282613
CHENNAI
C/MOS AUTOMATION
INDIA PVT. LTD.
TEL:+91(44)52060145
52060146
FAX:+91(44)52060148
NASHIK
KOLKATA
TTS SYSTEMATIX PVT. LTD DIGILOG SYSTEMS
TEL:+91(253)6610070
TEL:+91(33)24814921/22
GURGAON
6615976
TEL:+91(124)4267466/67
FAX:+91(33)24814921
FAX:+91(124)4267466
www.intericsdesigns.com
MESSUNG AREA OFFICES
levels of functionality – Economic, Classic
and Premium, the Smart Touch Series offers
you the unique flexibility in making the most
balanced choice to suit your precise
affordable price. The series includes Touch
sizes from 3 to 10.4 inches. With three
CMYK
Yes
4 MB
Yes
8 MB
Yes
512 KB
Application Flash ROM
1.20
Weight (kg)
CE
Cable Between SMART Touch HMI to Nexgen5000 PLC Port-1, 2, 3 OR Nexgen2000 PLC Port-2: RS232
Cable Between SMART Touch HMI to Nexgen5000 PLC Port-2, 3 OR Nexgen2000 PLC Port-2: RS485
Cable Between SMART Touch HMI to Micro PLC : RS485
Cable Between SMART Touch HMI to Nexgen 5000 PLC Port-2, 3 OR Nexgen 2000 PLC Port 2: RS422
2.
4.
5.
1.20
IP65
STCAB2 0310 B
STCAB1 0306 C
STCAB1 0310 C
STCAB1 0310 A
STCAB1 0310 1A
Ordering Code
24V DC ±15%, <24W
220.8 x 165.8
231.0 (w) x 176.0 (H) x 46.8 (D)
3.
Cable Between SMART Touch HMI to Nexgen2000 PLC Port-1 : RS232
1.
Description (SMART Touch HMI Series to PLC Communication Cables - Length 3 Mtrs)
IP65
Front protection
Sr.No.
24V DC ±15%, <24W
220.8 x 165.8
supply voltage
231.0 (w) x 176.0 (H) x 46.8 (D)
External dimensions (mm)
Cut-out dimensions (mm)
Certification
Ethernet
CE
SMART Touch HMI Programming Cable
Programming cable for SMART Touch HMI,
9 pin female (RS232 Port) to
9 pin male - 4 mtrs
Programming cable for SMART Touch HMI,
9 pin female (RS232 port) to
25 pin male - 4 mtrs
1.90
IP65
24V DC ±15%, <30W
286.0 x 211.0
297.0 (w) x 222.0 (H) x 52.3 (D)
Yes
9931
9930
Item Code
9-pin female (RS422/RS485)
CE
-
-
-
1
1
1
USB Device
Multi-functional port
-
2
2
2
USB Host
Yes
9-pin female (RS422/RS485)
9-pin female (RS422/RS485)
Yes
25-pin female (RS232/RS422/RS485)
25-pin female (RS232/RS422/RS485)
COM2
COM3
-
Yes
9-pin female (RS232/RS485)
9-pin female (RS232/RS485)
9-pin female (RS232/RS485)
COM1
25-pin female (RS232/RS422/RS485)
512 KB
Yes
Data store (CF card)
Data/Recipe
512 KB
8 MB
Yes
4 MB
1 Menu key and 7 user-defined
function keys (F1-F7)
RTC
(w/rechargeable lithium battery)
Keypad
1 Menu key and 6 user-defined function keys (F1-F6)
> 1,000.000
Analog
PWR, COM1-3, Ethernet LEDs
1 Menu key and 6 user-defined
function keys (F1-F6)
Analog
> 1,000.000
PWR, COM1-3, Ethernet LEDs
> 1,000.000
Touch screen
(number of times)
Touch screen
50,000 hours
58,000 hours
Analog
50,000 hours
Back light life
-
CCFT
16 shades of gray
32 bits RISC
400
640x480
64K colors
Color TFT LCD
MS-100T-Pe
10.4" (diagonal)
Mono LCD
MS-100M-Ce
CCFT
64 K colors
Via touch panel
32 bits RISC
200
640 x 480
7.5" (diagonal)
Color STN LCD
MS-80C-Pe
PWR, COM1-3, Ethernet LEDs
CCFT
Back light type
Operation Status LED
64 K colors
-
32 bits RISC
Display colors
Contrast adjustment
CPU
350
7" (diagonal)
Brightness (cd/m2)
Color TFT LCD
LCD Type
Screen interfaces available in five different
800x480
performance HMI functionality at an
Screen Size
Workstation terminal to suit advanced application needs
MS-80C-Ce
A Balanced Choice
Display Resolution
The Smart Touch Series offers you high
MS-70T-Pe
T: Display Type:
M- Monochrome
B: Blue mode
C: Colour
T: TFT
_e: Enhanced
(USB and Compact Flash)
P: Premium :
with an integrated Ethernet
networking port.
C: Classic :
It has the same functionality as the
Economy version as well as
Data/Recipe handling and a
communication port for a printer or
external keyboard.
Version Type
E: Economy :
Includes most software and hardware
requirements for an operator
terminal, such as Alarm Handling,
WindowsTM Fonts, Multi-language
support, animated graphics and
macro features.
10: Display Size:
3 : 3"
4 : 3.3"
P: Version Type:
5 : 4.7"
E: Economy
6 : 5.7"
C: Classic
7 : 7"
P: Premium
8 : 7.5"
10 : 10.4"
0: Basic Model e: Enhanced:
USB and Compact
Flash
S: S: Soft Key
H: Hard Key
MS-100T-Pe
The SMART Touch-series consists of
various models and versions
SMART Touch HMI Series - the hallmark of flexibility and convenience!
MS-70T-Ce
Messung, the pioneer in indigenous PLC technology, has continuously embarked on a path of innovation to design and
produce the finest automation products in India. Our technical competence and diligence has complemented our vision of
excellence, resulting in a wide array of versatile products complying with end-user requirements.
Technical Specification
application requirements.
Touch HMI
CMYK
The New Generation HMIs with smart add-on features!
B a l a n c e d
C h o i c e
IP65
IP65
0.81
185.8 x 135.8
24V DC ±15%, <20W
24V DC ±15%, <12W
195.0 (W) x 145.0 (H) x 59.1 (D)
160.7 x 93.0
170.3 (W) x 102.6 (H) x 45.3 (D)
0.81
0.86
A
-
Yes
-
-
26-pin connector for printer
-
CE
-
Yes
26-pin connector
for printer
-
25-pin female (RS232/RS422/RS485)
9-pin female (RS422/RS485)
CE
1
1
-
-
-
Yes
9-pin female (RS232/RS485)
-
512 KB
Yes
IP65
-
0.47
0.21
0.37
IP65
Front protection
Weight (kg)
24V DC ±15%, <4W
24V DC ±15%, <8W
supply voltage
96 (W) x 96 (H) x 40 (D)
89.3 x 89.3
160.8 x 93.3
173.0 (w) x 105.5 (H) x 51.8 (D)
Programming software for
the SMART Touch HMIs
Cut-out dimensions (mm)
External dimensions (mm)
CE
CE
Certification
Ethernet
Multi-functional port
USB Device
USB Host
-
-
9-pin female(RS232/RS422/RS485)
COM2
COM3
COM1
-
9-pin female (RS232/RS422/RS485
-
-
-
-
Data/Recipe
Data store (CF card)
Yes
Yes
Yes
RTC
(w/rechargeable lithium battery)
4MB
4 MB
Application Flash ROM
16 mechanical switches
Keypad
> 1,000,000
Touch screen
(number of times)
Analog
Touch screen
50,000 hours
40,000 hours
PWR & COM1 LEDs
PWR & COM2 LEDs
50,000 hours
Back light life
Operation Status LED
CCFT
16 shades of blue
16 shades of gray
LED
LED
16 shades of gray
Display colors
Back light type
Via VR
Contrast adjustment
32 bits RISC
110
Via touch panel
Via touch panel
32 bits RISC
32 bits RISC
CPU
240x240
90
35
160 x 80
Display Resolution
Brightness (cd/m2)
Mono STN LCD
Mono STN LCD
3.3" (diagonal)
3" (diagonal)
Mono STN LCD
LCD Type
Screen Size
MS-50B-E
MS-40M-E
MH-30M-E
Technical
Specification
Technical
Specification
Touch HMI
CMYK
9-pin female (RS232/RS485)
4MB
-
1 Menu key and 5 user-defined function keys (F1-F5)
-
> 1,000,000
> 1,000,000
4MB
Analog
Analog
-
60,000 hours
PWR, COM1, COM2, Ethernet LEDs
50,000 hours
PWR & COM1, COM2 LEDs
256 colors
256 colors
16 shades of blue
110
Via touch panel
CCFT
32 bits RISC
180
320 x 240
240 x 128
512 KB
c
64 K Colors
-
350
Color TFT LCD
5.7" (diagonal)
Mono STN LCD
4.7" (diagonal)
Color STN LCD
Touch HMI
MS-60B-E
MS-60B-C
MS-60B-P
MS-60C-E
MS-60T-C
MS-60T-Pe
CMYK
Off-line and On-line
simulation
Screen management
Cross references
The "SOFT Touch" software is a
In order to save valuable time and
The "Screen Manager" function
"Cross Reference" is a feature that
versatile and user-friendly HMI
money at on-site commissioning,
makes project management easy
enables the programmer to easily
programming software. It is ideal
the "SOFT Touch" software
and enables the programmer to
handle project tags, objects and
for equipment manufacturers and
provides powerful "Off-line and
overview the entire project.
signals. These can quickly be
system integrators. It supports
On-line Simulation". This allows
It is possible to select between
located and listed to get an
flexible tools to complete screens
the HMI project to be thoroughly
thumbnail and detailed zoomed
overview of where and how they
in minutes.
tested either just on a PC, or by
views, facilitating dynamic
are used. Changes in the data,
"SOFT Touch" is the perfect
combining the HMI with a PC to
screens to be created and viewed.
can be made in the tag list and
software to develop simple or
comprehensively test HMI and
Ideal for project cutting and
subsequently the remaining data
complex projects.
controller reactions,
pasting, browsing, editing and
changes automatically in the
The configuration software is
communications etc.
co-ordinating the operator
project.
available free of charge on
Off-line simulation allows the
terminal screens. Ensures fast
The list has up to 3 windows,
www.messung.com
developer to quickly test the
and easy project creation.
giving a complete project
entire project and verify the
overview. Sort the Cross
overall functionality of screens
Reference list by screen number,
and alarms. On-line simulation
screen name, tag name or
proves the communication and
controller address. Locate objects
the functionality of the host
and change parameters directly
controller, such as a PLC or an
from the list.
inverter.
CMYK
Touch HMI
A
B a l a n c e d
C h o i c e
: Nexgen-4000 / 5000 / 2000 /
2000 Plus
: Nexgen 1000 (upcoming)
Messung PLC
: XMP8-10 Micro PLC Series
Messung PLC
: Nexgen-5000 / 2000 /
Messung PLC
(Transparent Mode)
2000 Plus
: Freqrol-A500 Series
Mitsubishi Drive
Computer Protocol : Computer (as master)
Computer Protocol : Computer (as slave)
Computer Protocol : Computer (as master) V2
: Modbus Master
Modbus
: Modbus Slave
Modbus
: Modbus(ASCII) Master
Modbus
: Modbus(ASCII) Slave
Modbus
: Modbus(ASCII) Master -- V2
Modbus
: Modbus TCP/IP Device
Modbus
: Modbus TCP/IP Master
Modbus
: Modbus TCP/IP Device (Type 2)
Modbus
: ASCII Device
Terminal
: Null Demo Driver
Demo
Messung PLC
Next
Home
Product C tan flow
A
Line A
Next
NEXT 1
T-1
T-2
NEXT
Show
Message
PREVIOUS
MIX B
MENU
Macro functionality
?
The "SOFT Touch" software saves
valuable time by providing ready-made
modules e.g. arithmetic calculations, logical
operators and bit settings. These can easily
be linked to each other or to other data
within the project using macro functionality
? Screen open macro
? Screen close macro
? Cyclic macro
? Initial application macro
? Clock macro
? Macros triggered by digital signals
Animated graphics
Multi-language
support
Making it easy for manufacturers who
export all over the world, multi-language
support allows the programmer to develop
projects that can be used basically
anywhere. With this setup within the HMI,
to change languages is just a switch away.
The language can also be changed during
normal operation so that each operator can
decide what language to use
? Develop the application in up to 5
different languages
The graphic handling in the SMART Touch
HMI series is developed with both the
programmer and the user in mind. The
animated graphics allow a variety of
graphic possibilities with only the
programmer’s imagination being the limit.
? Import graphic formats such as Bitmaps,
JPEG, GIF and AutoCAD™ files
(*.bmp, *.jpg, *.gif, *.dwg, *.dxf )
? Supports animated gif images for
complex and flexible screen creations
? Switch languages freely during normal
operation
? Graphics can be moved in pre-defined
Communication
drivers
To accompany this inspiring range of HMIs,
is a range of free-of-charge communication
drivers.
All Windows™
fonts supported
Since the "SOFT Touch" software is based
around the WindowsTM
File protection
Protecting the application from
unauthorized upload and download is
essential in today’s manufacturing world.
The “File Protection” feature ensures that
only authorized users can access sensitive
information.
? Impossible to upload the protected
application from the terminal without the
correct password
operating system, a font library with up to
Multi-channel communication is a unique
feature that allows a different controller to
be connected on each serial or Ethernet
port. This flexible communications solution
not only saves on buying multiple HMIs,
but also removes the need for expensive
protocol converters.
? Connect a controller to each available
port either via serial or Ethernet
connection
? Move values between the drivers via
16 different fonts can be defined, exported
macros
and imported.
? Use values from several controllers in
paths or are freely controlled by the
programmer to maximize screen space
? Sub-macros that can be triggered from
Multi-channel
communication
calculations
? Scrolling text can be used allowing long
the other macros
text strings to be displayed
MH-30M
CMYK
MS-40M
MS-50B
MS-60B
MS-70T
MS-80C
MS-100T
CMYK
Touch HMI
A
B a l a n c e d
C h o i c e
: Nexgen-4000 / 5000 / 2000 /
2000 Plus
: Nexgen 1000 (upcoming)
Messung PLC
: XMP8-10 Micro PLC Series
Messung PLC
: Nexgen-5000 / 2000 /
Messung PLC
(Transparent Mode)
2000 Plus
: Freqrol-A500 Series
Mitsubishi Drive
Computer Protocol : Computer (as master)
Computer Protocol : Computer (as slave)
Computer Protocol : Computer (as master) V2
: Modbus Master
Modbus
: Modbus Slave
Modbus
: Modbus(ASCII) Master
Modbus
: Modbus(ASCII) Slave
Modbus
: Modbus(ASCII) Master -- V2
Modbus
: Modbus TCP/IP Device
Modbus
: Modbus TCP/IP Master
Modbus
: Modbus TCP/IP Device (Type 2)
Modbus
: ASCII Device
Terminal
: Null Demo Driver
Demo
Messung PLC
Next
Home
Product C tan flow
A
Line A
Next
NEXT 1
T-1
T-2
NEXT
Show
Message
PREVIOUS
MIX B
MENU
Macro functionality
?
The "SOFT Touch" software saves
valuable time by providing ready-made
modules e.g. arithmetic calculations, logical
operators and bit settings. These can easily
be linked to each other or to other data
within the project using macro functionality
? Screen open macro
? Screen close macro
? Cyclic macro
? Initial application macro
? Clock macro
? Macros triggered by digital signals
Animated graphics
Multi-language
support
Making it easy for manufacturers who
export all over the world, multi-language
support allows the programmer to develop
projects that can be used basically
anywhere. With this setup within the HMI,
to change languages is just a switch away.
The language can also be changed during
normal operation so that each operator can
decide what language to use
? Develop the application in up to 5
different languages
The graphic handling in the SMART Touch
HMI series is developed with both the
programmer and the user in mind. The
animated graphics allow a variety of
graphic possibilities with only the
programmer’s imagination being the limit.
? Import graphic formats such as Bitmaps,
JPEG, GIF and AutoCAD™ files
(*.bmp, *.jpg, *.gif, *.dwg, *.dxf )
? Supports animated gif images for
complex and flexible screen creations
? Switch languages freely during normal
operation
? Graphics can be moved in pre-defined
Communication
drivers
To accompany this inspiring range of HMIs,
is a range of free-of-charge communication
drivers.
All Windows™
fonts supported
Since the "SOFT Touch" software is based
around the WindowsTM
File protection
Protecting the application from
unauthorized upload and download is
essential in today’s manufacturing world.
The “File Protection” feature ensures that
only authorized users can access sensitive
information.
? Impossible to upload the protected
application from the terminal without the
correct password
operating system, a font library with up to
Multi-channel communication is a unique
feature that allows a different controller to
be connected on each serial or Ethernet
port. This flexible communications solution
not only saves on buying multiple HMIs,
but also removes the need for expensive
protocol converters.
? Connect a controller to each available
port either via serial or Ethernet
connection
? Move values between the drivers via
16 different fonts can be defined, exported
macros
and imported.
? Use values from several controllers in
paths or are freely controlled by the
programmer to maximize screen space
? Sub-macros that can be triggered from
Multi-channel
communication
calculations
? Scrolling text can be used allowing long
the other macros
text strings to be displayed
MH-30M
CMYK
MS-40M
MS-50B
MS-60B
MS-70T
MS-80C
MS-100T
CMYK
CMYK
Touch HMI
Display Resolution
160 x 80
240x240
240 x 128
Brightness (cd/m2)
35
90
110
LCD Type
16 shades of gray
16 shades of gray
16 shades of blue
LED
LED
CCFT
50,000 hours
PWR & COM1, COM2 LEDs
PWR, COM1, COM2, Ethernet LEDs
Touch screen
-
Analog
Analog
Analog
Touch screen
(number of times)
-
> 1,000,000
> 1,000,000
> 1,000,000
16 mechanical switches
-
-
1 Menu key and 5 user-defined function keys (F1-F5)
4 MB
4MB
4MB
4MB
Yes
Yes
Yes
Yes
Application Flash ROM
RTC
(w/rechargeable lithium battery)
-
-
-
Yes
0.86
-
9-pin female (RS422/RS485)
-
-
-
USB Host
-
-
-
-
-
1
USB Device
-
-
-
-
-
1
Multi-functional port
-
-
-
Ethernet
-
-
-
CE
CE
CE
CE
External dimensions (mm)
173.0 (w) x 105.5 (H) x 51.8 (D)
96 (W) x 96 (H) x 40 (D)
170.3 (W) x 102.6 (H) x 45.3 (D)
195.0 (W) x 145.0 (H) x 59.1 (D)
Cut-out dimensions (mm)
160.8 x 93.3
89.3 x 89.3
160.7 x 93.0
185.8 x 135.8
24V DC ±15%, <8W
24V DC ±15%, <4W
24V DC ±15%, <12W
24V DC ±15%, <20W
Front protection
IP65
IP65
IP65
IP65
Weight (kg)
0.37
0.21
0.47
COM1
-
9-pin female (RS232/RS422/RS485
9-pin female (RS232/RS485)
9-pin female (RS232/RS485)
25-pin female (RS232/RS422/RS485)
512 KB
26-pin connector
for printer
9-pin female(RS232/RS422/RS485)
supply voltage
-
26-pin connector for printer
-
Yes
-
0.81
0.81
512 KB
-
-
-
-
COM2
COM3
Certification
50,000 hours
Yes
-
-
c
Display colors
Back light type
16 shades of blue
Via VR
Contrast adjustment
Data/Recipe
Data store (CF card)
60,000 hours
40,000 hours
PWR & COM1 LEDs
Back light life
256 colors
64 K Colors
50,000 hours
Keypad
CCFT
256 colors
PWR & COM2 LEDs
Operation Status LED
32 bits RISC
Via touch panel
32 bits RISC
32 bits RISC
Via touch panel
350
4.7" (diagonal)
Screen Size
Via touch panel
32 bits RISC
CPU
180
Mono STN LCD
3.3" (diagonal)
320 x 240
Mono STN LCD
3" (diagonal)
110
Color TFT LCD
Color STN LCD
Mono STN LCD
5.7" (diagonal)
MS-50B-E
Mono STN LCD
MS-60T-Pe
MS-60T-C
MS-60C-E
MS-60B-P
MS-60B-C
MS-40M-E
MS-60B-E
MH-30M-E
Technical
Specification
Technical
Specification
Touch HMI
A
B a l a n c e d
C h o i c e
versatile and user-friendly HMI
The "SOFT Touch" software is a
provides powerful "Off-line and
the "SOFT Touch" software
money at on-site commissioning,
In order to save valuable time and
thumbnail and detailed zoomed
It is possible to select between
overview the entire project.
and enables the programmer to
makes project management easy
The "Screen Manager" function
are used. Changes in the data,
overview of where and how they
located and listed to get an
signals. These can quickly be
handle project tags, objects and
enables the programmer to easily
"Cross Reference" is a feature that
Cross references
programming software. It is ideal
On-line Simulation". This allows
can be made in the tag list and
Screen management
for equipment manufacturers and
the HMI project to be thoroughly
views, facilitating dynamic
Off-line and On-line
simulation
system integrators. It supports
screens to be created and viewed.
Programming software for
the SMART Touch HMIs
flexible tools to complete screens
tested either just on a PC, or by
project.
changes automatically in the
subsequently the remaining data
combining the HMI with a PC to
Ideal for project cutting and
pasting, browsing, editing and
The list has up to 3 windows,
communications etc.
controller reactions,
comprehensively test HMI and
in minutes.
"SOFT Touch" is the perfect
software to develop simple or
complex projects.
terminal screens. Ensures fast
co-ordinating the operator
Off-line simulation allows the
giving a complete project
The configuration software is
available free of charge on
and easy project creation.
proves the communication and
and alarms. On-line simulation
overall functionality of screens
from the list.
and change parameters directly
controller address. Locate objects
screen name, tag name or
Reference list by screen number,
overview. Sort the Cross
developer to quickly test the
the functionality of the host
entire project and verify the
www.messung.com
controller, such as a PLC or an
inverter.
Touch HMI
Technical Specification
MS-70T-Ce
LCD Type
Screen Size
Display Resolution
Brightness (cd/m2)
CPU
MS-70T-Pe
MS-80C-Pe
MS-100M-Ce
MS-100T-Pe
Mono LCD
Color TFT LCD
Color TFT LCD
Color STN LCD
7" (diagonal)
7.5" (diagonal)
10.4" (diagonal)
800x480
640 x 480
640x480
350
200
400
32 bits RISC
32 bits RISC
32 bits RISC
-
Via touch panel
64 K colors
64 K colors
Contrast adjustment
Display colors
MS-80C-Ce
CCFT
CCFT
Back light life
50,000 hours
58,000 hours
50,000 hours
PWR, COM1-3, Ethernet LEDs
PWR, COM1-3, Ethernet LEDs
PWR, COM1-3, Ethernet LEDs
Analog
Analog
Analog
> 1,000.000
> 1,000.000
> 1,000.000
1 Menu key and 6 user-defined
function keys (F1-F6)
1 Menu key and 6 user-defined function keys (F1-F6)
1 Menu key and 7 user-defined
function keys (F1-F7)
8 MB
4 MB
Yes
Yes
Yes
512 KB
512 KB
512 KB
Touch screen
Touch screen
(number of times)
Keypad
Application Flash ROM
RTC
(w/rechargeable lithium battery)
Data/Recipe
CCFT
4 MB
Yes
Yes
COM1
9-pin female (RS232/RS485)
9-pin female (RS232/RS485)
9-pin female (RS232/RS485)
COM2
25-pin female (RS232/RS422/RS485)
25-pin female (RS232/RS422/RS485)
25-pin female (RS232/RS422/RS485)
COM3
9-pin female (RS422/RS485)
9-pin female (RS422/RS485)
USB Host
2
2
2
USB Device
1
1
1
Multi-functional port
-
-
Ethernet
-
Certification
Yes
-
9-pin female (RS422/RS485)
Yes
-
-
Yes
CE
External dimensions (mm)
231.0 (w) x 176.0 (H) x 46.8 (D)
231.0 (w) x 176.0 (H) x 46.8 (D)
297.0 (w) x 222.0 (H) x 52.3 (D)
Cut-out dimensions (mm)
220.8 x 165.8
220.8 x 165.8
286.0 x 211.0
24V DC ±15%, <24W
24V DC ±15%, <24W
24V DC ±15%, <30W
Front protection
IP65
IP65
IP65
Weight (kg)
1.20
1.20
Sr.No.
C: Classic :
It has the same functionality as the
Economy version as well as
Data/Recipe handling and a
communication port for a printer or
external keyboard.
P: Premium :
with an integrated Ethernet
networking port.
CE
CE
supply voltage
Version Type
E: Economy :
Includes most software and hardware
requirements for an operator
terminal, such as Alarm Handling,
WindowsTM Fonts, Multi-language
support, animated graphics and
macro features.
8 MB
Yes
Data store (CF card)
T: Display Type:
M- Monochrome
B: Blue mode
C: Colour
T: TFT
10: Display Size:
3 : 3"
4 : 3.3"
P: Version Type:
5 : 4.7"
E: Economy
6 : 5.7"
C: Classic
7 : 7"
P: Premium
8 : 7.5"
10 : 10.4"
0: Basic Model e: Enhanced:
USB and Compact
Flash
64K colors
Back light type
Operation Status LED
MS-100T-Pe
S: S: Soft Key
H: Hard Key
16 shades of gray
The SMART Touch-series consists of
various models and versions
_e: Enhanced
(USB and Compact Flash)
1.90
Description (SMART Touch HMI Series to PLC Communication Cables - Length 3 Mtrs)
Ordering Code
1.
Cable Between SMART Touch HMI to Nexgen2000 PLC Port-1 : RS232
STCAB1 0310 1A
2.
Cable Between SMART Touch HMI to Nexgen5000 PLC Port-1, 2, 3 OR Nexgen2000 PLC Port-2: RS232
STCAB1 0310 A
3.
Cable Between SMART Touch HMI to Nexgen5000 PLC Port-2, 3 OR Nexgen2000 PLC Port-2: RS485
STCAB1 0310 C
4.
Cable Between SMART Touch HMI to Micro PLC : RS485
STCAB1 0306 C
Programming cable for SMART Touch HMI,
9 pin female(RS232 port) to 25 pin male-4 mtrs
9931
5.
Cable Between SMART Touch HMI to Nexgen 5000 PLC Port-2, 3 OR Nexgen 2000 PLC Port 2: RS422
STCAB2 0310 B
PC Based Progamming Software "SOFT Touch"
9940
SMART Touch HMI Programming Cable
Item Code
Programming cable for SMART Touch HMI,
9 pin female(RS232 Port) to 9 pin male-4 mtrs
9930
CMYK
Touch HMI
A Balanced Choice
A U T O M A T I O N
P E O P L E
MESSUNG SYSTEMS
MANUFACTURER OF PLCs, RIOs & HMIs
Kohinoor House, EL-2, J Block, M.I.D.C. Bhosari, Pune - 411 026. India
Tel. : +91(020) 27102000 / 27102125 Fax: +91(020) 27102100
Email: [email protected] Website: www.messung.com
AREA DISTRIBUTORS
PUNE
MESSUNG SYSTEMS
TEL:+91(20)27123130
27128927
FAX:+91(20)27128108
NAGPUR
TELEFAX: +91(712) 2284020
MUMBAI
MESSUNG SYSTEMS
TEL:+91(22)26674308
66949564
FAX:+91(22)26674309
BANGALORE
MESSUNG SYSTEMS
TEL:+91(80)41732564
41732592
FAX:+91(80)41320758
NEW DELHI
MESSUNG SYSTEMS
TEL:+91(11)29216128
29226129
FAX:+91(11)29226130
HYDERABAD
MESSUNG SYSTEMS
TEL:+91(40)27722519
27720308
FAX:+91(40)27722519
BARODA
MESSUNG SYSTEMS
TEL:+91(265)2314699
2358137
FAX:+91(265)2333307
COIMBATORE
MESSUNG SYSTEMS
TEL:+91(422)4385606
SERVICE CENTRE
AHMEDABAD
Document No.: Released -001/1000/05/2008
CMYK
FAX:+91(422)4385606
BANGALORE
LEONARDO AUTOMATION
TEL:+91(80)23287161
23283030
FAX:+91(80)23282613
CHENNAI
C/MOS AUTOMATION
INDIA PVT. LTD.
TEL:+91(44)52060145
52060146
FAX:+91(44)52060148
NASHIK
KOLKATA
TTS SYSTEMATIX PVT. LTD DIGILOG SYSTEMS
TEL:+91(253)6610070
TEL:+91(33)24814921/22
GURGAON
6615976
TEL:+91(124)4267466/67
FAX:+91(33)24814921
FAX:+91(124)4267466
www.intericsdesigns.com
MESSUNG AREA OFFICES