advertisement
ECCO
PRODUCTS
Finishing Equipment & Accessories
ECCO FINISHING PRODUCTS AND SPARE PARTS
MORE QUALITY PRODUCTION TIME
The main focus of ECCO Finishing AB is to reduce production costs for its customers, while maintaining high quality results. Thus ECCO
Finishing provides products that ensure “More Quality Production Time” to our end users. We offer world class finishing products to answer to the most demanding applications.
HOW?
Our products are built for productivity and are made of high quality materials. Therefore, we have proven that we can help provide:
• Better transfer efficiency with our spray guns
• Great atomizing quality
• More reliability of our products due to their special design
• Reduced down time in production
• Reduced maintenance costs
• Fast pay back
• Ensure technical support in case you need it
CASE STORIES
Our case stories will prove you that we have achieved the above improvements at customers. Ask us for case story relevant for your market.
QUALITY
More than ever production people are focusing on optimizing output. This means improving first time quality of finished goods, reduce production costs and reducing down time of production lines. What is more irritating than a break down in production due to a failing part in the system? Thus we at ECCO Finishing focus on providing the best quality products to respond to the concerns of the demanding industrial finishing process. We choose the best quality materials and ensure authentic Swedish quality.
ENVIRONMENT
ECCO Finishing is dedicated to help its customers to reduce overspray and VOC impact on the environment. Our product development focus on high quality as well as sustainable products, causing smallest possible environmental impact, both when being manufactured and when running in production. ECCO Finishing is certified according to the environmental standards ISO-14001.
SPRAY GUNS:
Low pressure guns:
Airless/ Air assisted guns:
Electrostatic guns:
FLUID HANDLING / PUMPS:
Low pressure pumps:
High pressure pumps:
2 componens fluid handling:
PAINTER’S PROTECTION:
INDEX
About Ecco Finishing 2
Low Pressure Spraying Methods
Low pressure spray guns - automatic
Low pressure spray guns - manual
Air cap guide
Acessories & spares for low pressure spray guns
Hoses for low pressure spray guns
Low pressure Spray Packs
Airless spraying methods
Airless spray guns - automatic
Airless spray guns - manual
Spray tips for airless guns
Spray tips for air assisted guns
Airless Spare Parts
Hoses for airless spray guns
High pressure Spray Packs
Electrostatic low pressure gun
Electrostatic high pressure gun
Pumps and fluid handling systems
Paint supply units (PSU)
Low pressure diaphragm pump
Low pressure piston pumps
Pressure feed tanks
Paint pressure regulator & colour changing system, heater
Stirrers
High pressure Power Flow Pumps
Acessories for high pressure pumps
2K Fluid handling systems
Personal safety
32-33
34
35
36
37-38
39
40
41
42-44
45
46
47
19-20
21-22
23-24
25
26
27
28-29
30-31
3
4-7
8-11
12
13-14
15
16-17
18
– 2 –
ECCO FINISHING PRODUCTS AND SPARE PARTS
ECCO FINISHING PRODUCTS AND SPARE PARTS ECCO FINISHING PRODUCTS AND SPARE PARTS
ECCO LOW PRESSURE PAINT SPRAYING
- HIGH EFFICIENCY TECHNOLOGY
Our concern is to offer you the best finishing technology for your demand. Therefore we offer three different application methods for different materials and different demands:
• Conventional spraying
• High Efficiency
• HVLP
Conventional spray painting is using high velocity air jets at high pressure to create high atomization. This is suitable for painting where the result must have the best appearance quality. By using the conventional method you will reach high gloss and the best result in color and DOI (Distinction of Image). However the paint consumption is higher. Operating pressure is around 2 to 4 bars (30 to 60 psi).
HVLP (High Volume Low Pressure) uses more air at lower velocity to atomize the paint, compared to the conventional paint spraying.
The lower air pressure creates larger paint particles, which will give you a lower finish quality. However, it creates less overspray that increases the transfer efficiency. HVLP operates at 0,7 bar (10 psi) at the air cap in order to bring 65% transfer efficiency.
High Efficiency is a combination of both of the above methods, and thus it offers you both a high quality of finish and high transfer efficiency. Here the air cap pressure is between 1,3 and 3 bars (20 to 45 psi) and we exceed 65% transfer efficiency. This is a great combination and offers best advantages of both of the above technologies.
Each method has its justification and will also depend on the material you want to apply.
ADVANTAGES
• First class finish
• Paint savings and low overspray
• Uniformed coat thickness
• Simple and easy adjustment of fan pattern and paint flow
• Versatile guns for many different applications
ECCO is proposing a range of different automatic and manual guns for industrial applications. A very large range of air caps, fluid nozzles and needles in sizes and materials (SS, tungsten carbide) allows you to optimize the gun for your application.
APPLICATIONS
• Automotive
MATERIALS TYPE
• Solvent & water based
• Tier 1 Automotive • Fillers
• Plastic consumer goods • UV curing paint
• Aerospace • 2K materials
• Agriculture equipment • Lacquers and sealants
• Wood Furniture/ joinery • Stain and varnishes
• Leather industry • Release agent
• Ceramics and enamel • Adhesive
• General Industry
• Truck and Bus
– 3 –
LOW PRESSURE AUTOMATIC SPRAY GUNS
ECCO 75AP
ECCO 70AS
The ECCO 75 AP is designed for applications where the areas are small and narrow.
It has a 70% reduced inner space for the paint (vs. E70AS), which reduces the paint consumption when many color changes are made. Angles of paint channels have been optimized for best possible cleaning effect. ECCO 75AP represent the latest development in automatic guns. Well-known technology has been used in the air caps and nozzles, in combination with optimal design of the gun body. The result is a very compact unit with highest possible core values in performance. TCP and interface is equal to the ECCO 70.
Technical data
Weight
Body
Nozzle
Air cap
Needle
Sealings
* Tuf is a unique process of hardening and reducing friction on aluminum
** Tungsten Carbide *** Perfluor 128 is equal to Kalrez 4079
ECCO 75AP
490g
SS
SS or TC**
Alu/Tuf*
4 mm SS or TC.**
Teflon/Perfl.***, UHMV
For Ecco 75AP
Service set, internal parts
Gasket set, for Ecco75AP & 70AS
For Ecco 75AP:
Viscosity SIS/DIN 4 (sec)
Paint nozzle
Ø mm*
G 1,1
F 1,1
G 1,2
1,3
G1,4
F 1,4
F 1,4
F 1,4
0,5
F 0,6
0,8
0,8
0,8
1,1
F 1,1
G 1,8
H 1,8
H 1,8
H 2,1
2,7
100
Ord No.
6004 0176 20
6004 0019 20
Air cap
T297
T297
T297
T278
T278F
T297F4
T297F2
T297
T278
6509
T297
T278
T278
T278
T297
T278
T272
T278
T272
T474
0 10 20 30 40 50 60 70 80 90
F= Nozzle with large outside tip diam. G= Nozzle with smaller outside tip diam
H = Tungsten carbide nozzle
Other nozzle / air cap combinations are available.
Ord. No.
8611 6175 05
8611 6175 18
8611 6175 08
8611 6175 09
8611 6175 24
8611 6175 11
8611 6175 15
8611 6175 16
8611 6175 17
8611 6175 01
8611 6175 13
8611 6175 00
8611 6175 02
8611 6175 03
8611 6175 21
8611 6175 12
8611 6175 44
8611 6175 45
8611 6175 43
8611 6175 49
ECCO70AS is the best choice for use with water or solvent borne materials on all types of robots and reciprocators. ECCO 70AS ensures a uniform spray pattern even after replacement of air cap and fluid nozzle. Due to reduced internal pressure drop of atomizing and fan air, the ECCO 70AS can stabilize the output parameters. Atomizing and fan air is completely separated from the inlet to the air cap. Exterior surfaces are easy to clean and treated to ensure minimum dirt collection. Built in strainer for optimum quality. For mounting plate for reciprocator or robot, see page 7, for strainer inserts 70
µm - 250 µm, see page 13.
Technical data
Weight
Housing
Cylinder
Nozzle
Air cap
Needle
Sealings
ECCO 70AS
960 g
SS
Alu/Tuf*
SS or TC**
Alu/Tuf*
4 mm SS or TC**
Teflon/Perfl.***
* Tuf is a unique process of hardening and reducing friction on aluminum
** Tungsten Carbide *** Perfluor 128 is equal to Kalrez 4079
For Ecco 70AS
Service set, internal parts
Gasket set for Ecco 70AS
Gasket set, for Ecco75AP & 70AS
Ord No.
6004 0018 10
6004 0019 00
6004 0019 20
For Ecco 70AS:
Viscosity SIS/DIN 4 (sec)
Paint nozzle
Ø mm
0,5
F 0,6
F 0,6
F 0,6
0,8
G 1,4
F 1,4
G 1,4
G 1,4
F 1,4
G 1,8
2,1
2,7
0,8
F 0,8
1,1
1,1
1,1
F 1,1
1,3
100 0 10 20 30 40 50 60 70 80 90
F= Nozzle with large outside tip diam. G= Nozzle with smaller outside tip diam
H = Tungsten carbide nozzle
Other nozzle / air cap combinations are available.
Air cap
T278
6514
6511
6509
T278
T278
T297
278
T278
T297
6518
T374
T474
T278
6509
T278
T297
T297
6509
T278
Ord. No.
8611 6171 06
8611 6171 18
8611 6171 21
8611 6171 33
8611 6171 02
8611 6171 13
8611 6171 32
8611 617 03
8611 6171 10
8611 6171 24
8611 6171 34
86116171 22
8611 6171 00
8611 6171 07
8611 6171 08
8611 6171 12
8611 6171 27
8611 6171 82
8611 6171 43
8611 6171 40
– 4 –
LOW PRESSURE AUTOMATIC SPRAY GUNS
ECCO 60AS CONVENTIONAL, ECCO 65AS HVLP
The ECCO 60AS and ECCO 65AS are compact and well suited for mounting on robot arms. The paint needle has air operated opening and closing by spring action. The short reaction time ensures a perfect spraying result and low paint consumption.
The needle seal is adjustable during operation. Simple and rigid mounting. Precise alignment by locating pin. Large paint supply control with exact setting with stepped positions. ECCO 60AS/65AS are stainless steel versions for abrasive and corrosive fluids.
The guns are service friendly, requiring only standard tools.
Technical data - ECCO 60AS CONVENTIONAL
Paint nozzles
Paint connection
Air connection
Air consumption
Weight
0.3 - 2.7 mm
G 3/8
Ø 8 and 10 mm
250 - 700 l/min
837 g
For Ecco 60AS:
Viscosity SIS/DIN 4 (sec)
0 10 20 30 40 50 60 70 80 90 100
Paint nozzle
Ø mm
1.1
1.3
1.5
1.8
2.1
2.7
Air cap
T278
T272
T272
T272
T374
T474
Ord. No.
8611 6160 62
8611 6160 63
8611 6160 67
8611 6160 68
8611 6160 69
8611 6160 70
Technical data - ECCO 65AS HVLP
Paint nozzles
Paint connection
Air connection
Air pressure
Air consumption
Weight
0.6 - 2.7 mm
G 3/8
Ø 8 and 10 mm recommended 3 bar approx. 260 l/min
828 g
For Ecco 65AS:
Viscosity SIS/DIN 4 (sec.)
0 10 20 30 40 50 60 70 80 90 100
Paint nozzle
Ø mm
0.9
1.1
1.4
1.8
2.1
2,7
Special versions of Ecco65AS for leather applications:
Ecco65AS Pro Leather
Ecco65AS Pro Leather
Ecco 65AS Pro Leather
Paint nozzle
1,3
1,2
1,4
Air cap
6509
6511
6514
6518
6521
6527
Air cap
6514
6514
6514
Ord. No.
8611 6560 09
8611 6560 11
8611 6560 14
8611 6560 18
8611 6560 21
8611 6560 27
Ord No.
8611 6561 12
8611 6561 13
8611 6561 14
ACCCESSORIES FOR ECCO 60AS/65AS
The kit remote fan width control makes it possible to control the atomizing air and the fan width air separate. The internal air valve is then bypassed and does not have any function.
MOUNTING PLATE FOR ECCO 60AS/65AS
Complete mounting plate for automatic spray guns ECCO 60AS and ECCO 65AS, complete with connecting nipples, for all types of reciprocators.
Kit for remote fan width control for ECCO60AS
Kit for remote fan width control for ECCO 65AS
Service set for gun ECCO 60AS/65AS
Ord. No.
6003 6691 80
6003 9697 80
6003 6572 00
Mounting plate for ECCO 60AS/65AS
Ord. No.
6004 0085 00
– 5 –
LOW PRESSURE AUTOMATIC SPRAY GUNS
ECCO 40DA
The ECCO 40DA is an automatic spray gun for spraying abrasive and other similar material (i.e. vitreous enamel). The gun has no paint needle. The material flow is accuratly controlled by a diaphragm, sealing against a tungsten carbide seat.
ECCO 40DA is small and easy to install. Remote control set for monitoring atomizing air and fan air externally is avalable as an accessory. (Ord.No. 6101 5627 90)
Technical data
Paint nozzle diam.
Paint connection
Air connection
Air consumption
Weight
Paint nozzle
Ø mm
1.3
1.5
1.8
2.1
Air cap
T272
T272
T274
T374
For more combinations see spare parts list.
ECCO 40FA
The ECCO 40FA is an automatic spray gun for spraying abrasive and other similar material (i.e. vitreous enamel). The gun has no paint needle. The material flow is controlled by an external valve.
Technical data
Paint nozzle diam.
Paint connection
Air connection
Air consumption
Weight
Paint nozzle
Ø mm
1.3
1.8
2,1
2.7
Air cap
T274
T274
T374
T474
0,3 - 2.7 mm
G 3/8
G 1/4
250 - 700 l/min
305 g
Ord. No.
8611 5210 25
8611 5210 10
8611 5210 66
8611 5210 67
1,3 - 2.7 mm
G 3/8
G 1/4
250 - 700 l/min
305 g
Ord. No.
8611 5240 13
8611 5240 18
8611 5240 21
8611 5240 27
For more combinations see spare parts list.
ECCO 71FA
The ECCO 71FA is an automatic spray gun for spraying abrasive and other similar material (i.e. vitreous enamel). The gun has no paint needle. The material flow is controlled by an external valve. To be mounted on a mounting plate.
Technical data
Paint nozzle diam.
Paint connection
Air connection
Air consumption
Weight
Paint nozzle
Ø mm
1.3
1.8
2,1
2.7
Air cap
T274
T274
T374
T474
0,3 - 2.1 mm see mounting plate see mounting plate
250 - 700 l/min
305 g
Ord. No.
8611 5271 13
8611 5271 18
8611 5271 21
8611 5271 27
For more combinations see spare parts list.
– 6 –
ACCESSORIES LOW PRESSURE AUTOMATIC SPRAY GUNS
GUN ADAPTER FOR ROBOT
All gun adapters are produced in aluminum coated for mechanical and chemical resistanse to all types of paints and solvents. The aluminum also gives a better sealing surface to the gun and the hose kit, compared to plastic adapters. TCP remains unchanged to standard gun adapters. Interface for all ECCO 70As and 75AP.
MOUNTING PLATE WITH SCREW
This universal mounting plate is produced in SS or aluminum with coating. Interface for all ECCO 70, 71 and 75 guns. Can be used for mounting on robots, reciprocators or other installations. Is prepared for paint circulation. This mounting plate i s mounted on the robot/reciprocator with screw. Push-in fittings for air: 8mm for fan width and atomizing air, 6mm for pilot air.
Gun adapter for robot (60°) ABB
Ord. No.
6004 0099 00
GUN ADAPTER WITH DUMP VALVE
Gun adapter with dump valve, compl. for robot (60°) ABB
Ord. No.
6004 0099 50
Mounting plate SS
Mounting plate Aluminum
Ord. No.
6003 9770 20
6003 9770 25
MOUNTING PLATE WITH GUIDE PIN
This universal mounting plate fits all ECCO 70,71 and 75 guns. Can be used for mounting on robots, reciprocators or other installations. Is prepared for paint circulation. The mounting plate is complete with a 13mm guide pin for assembly.
PAINT CONNECTIONS
Larger sized paint connections for mounting plate 6003 9770 20-25
Paint connection 3/8”
Ord. No.
6003 9770 51
Mounting plate with guide pin
ECCO CAP CLEANER
The ECCO cap cleaner is the perfect choice to be used with
ECCO 70/75 range of automatic guns. With this device you are securing production quality by knowing that the air cap is always clean. The 4+4 nozzles clean and dry the air cap in just a few seconds. Solvent and dumped paint material can also easily be collected for reducing waste handling in the booth.
The cap cleaner is available in alternative models for single, dual or triple guns. Can be adapted to other gun models, please contact Ecco for information.
ECCO cap cleaner
ECCO cap cleaner twin
ECCO cap cleaner triple
Ord. No.
6004 0101 00
6004 0101 40
6004 0101 50
Ord. No.
6003 9770 43
– 7 –
ECCO LOW PRESSURE MANUAL GUNS
- FOR ALL PROFESSIONAL USERS
Our robust and high performance guns comes in three different versions:
•
•
•
Pressure feed
Suction feed
Gravity feed
All guns can be equipped with Conventional, HVLP and High
Efficient technology. Stainless steel tips and needles for use with water based materials are standard on all guns.
VERSATILE GUN FOR DIFFERENT APPLICATIONS
The manual low pressure spray guns can be adapted according to different customers needs by various combinations of components. Fan width control can in addition to adjustable control be lockable, preset, quick- or max/min-adjustable. The gun can be used with or without control on the needle, with different sizes of connection nipples, and with different types and materials for the fluid needle, ie tungsten carbide, plastic or stainless steel.
BUILD IN FILTER FOR OPTIMUM QUALITY
The manual low pressure spray guns can be equipped with a replaceable strainer inside the fluid nozzle which is filtering the paint just before leaving the gun. The strainer will reduce the risk that any contamination caused by the fluid pipes or hoses reaches the surface. The main advantage is that the strainer will homogenize the paint, especially when metallic base coat is applied.
UNIQUE AIR CAPS
The treated aluminum air cap gives a harder surface, extented life and improved spray pattern.
TWIN AIR PASSAGES
Ensuring minimum pressure drop in the gun which is essential to obtain highest atomization.
PROTECTED FLUID NEEDLE
The paint needle is pro tected from paint build up and possible damage.
COMPACT DESIGN
The ECCO manual low pressure spray guns have a light weighted body, making the work easier for the painter. Compact design and smooth surfaces makes the gun easy to clean.
BALANCE
Perfect balance, especially in combination with the ECCO Ergotube™ (see page 15).
– 8 –
ECCO 35/352
- THE GUN THAT FITS EVERY HAND
The ECCO 35 manual spray gun is designed with the firm intention to offer a gun with exceptional ergonomic and high quality. The gun body is made in anodized aluminum in order to optimize balance and weight. ECCO 35 is produced to fulfil the application demands for all types of fluids, or instance, water born paint and high solids.
The inside paint channel is designed to be easy to clean, which saves time and solvent when changing colour.
Different control possibilities for the ECCO 35 are; air amount, fluid amount and width of spray pattern. The ECCO 35 spray gun can be equipped with a wide range of paint nozzles, air caps and needles to ensure an optimized application of all normally used materials.
The different nozzle combinations also includes a range of HVLP alternatives.
PRESSURE FEED - ECCO 35
Pressure feed spray gun. Fluid supplied from pressure pots, pumps or circulation systems.
Paint nozzles
Paint connection
Air connection
Air pressure
Air consumption
Weight
Technical data
0.2 - 2.7 mm
G 3/8
G 1/4 max. 7 bar
250 - 700 l/min
521 g
Viscosity SIS/DIN 4 (sec.)
0 10 20 30 40 50 60 70 80 90
Paint nozzle
Ø mm
0.9
1.1
1.4
1.8
2.1
2.7
100
Air cap
6509
6511
6514
6518
6521
6527
GRAVITY FEED - ECCO 352
Gravity feed spray gun, (see page 14 for alternative cups).
Ord. No.
8611 3540 09
8611 3540 11
8611 3540 14
8611 3540 18
8611 3540 21
8611 3540 27
Paint nozzles
Paint connection
Air connection
Air pressure
Air consumption
Weight
Technical data
0.2 - 2.7 mm
G 3/8
G 1/4 max. 7 bar
250 - 700 l/min
694 g
Viscosity SIS/DIN 4 (sec.)
0 10 20 30 40 50 60 70 80 90
Paint nozzle
Ø mm
0.9
1.1
1.4
1.8
2.1
2.7
100
Air cap
6509
6511
6514
6518
6521
6527
Ord. No.
8611 3542 09
8611 3542 11
8611 3542 14
8611 3542 18
8611 3542 21
8611 3542 27
– 9 –
– 10 –
ECCO 40S/401S/402S CONVENTIONAL
PRESSURE FEED - ECCO 40S
Pressure feed spray gun. Fluid supplied from pressure pots, pumps or circulation systems.
Paint nozzles
Paint connection
Air connection
Air pressure
Air consumption
Weight
Technical data
0.3 - 6.5 mm
G 3/8
G 1/4 max. 7 bar
250 - 700 l/min
568 g
Viscosity SIS/DIN 4 (sec.)
0 10 20 30 40 50 60 70 80 90
Paint nozzle
Ø mm
1.1
1.3
1.5
1.8
2.1
2.7
100
Air cap
T278
T272
T272
T272
T374
T474
Ord. No.
8611 4040 11
8611 4040 13
8611 4040 15
8611 4040 18
8611 4040 21
8611 4040 27
More nozzle/air cap combinations see separate spare part list.
SUCTION FEED - ECCO 401S
Suction feed spray gun ECCO 401S with 1.0 lit. suction cup,
(see page 14 for alternative cups).
Paint nozzles
Paint connection
Air connection
Air pressure
Air consumption
Weight
Technical data
0.3 - 2.7 mm
G 3/8
G 1/4 max. 7 bar
180 - 600 l/min
949 g
Viscosity SIS/DIN 4 (sec.)
0 10 20 30 40 50 60 70 80 90
Paint nozzle
Ø mm
1.2
1,3
1.5
1.8
2,1
2,7
100
Air cap
170
273
273
271
375
475
Ord. No.
8611 4010 12
8611 4010 13
8611 4010 15
8611 4010 18
8611 4010 21
8611 4010 27
More nozzle/air cap combinations see separate spare part list.
GRAVITY FEED - ECCO 402S
Gravity feed spray gun with 0.5 lit cup with drip guard,
(see page 14 for alternative cups).
Paint nozzles
Air connection
Air pressure
Air consumption
Weight
Technical data
0.8 - 6.5 mm
G 1/4 max. 7 bar
200 - 500 l/min
654 g
Viscosity SIS/DIN 4 (sec.)
0 10 20 30
Paint nozzle
Ø mm
1.2
1.3
1,5
1.8
2.1
100
Air cap
170
273
375
271
375
40 50 60 70 80 90
More nozzle/ air cap combinations see separate spare part list.
Ord. No.
8611 4020 12
8611 4020 13
8611 4020 15
8611 4020 18
8611 4020 21
Viscosity SIS/DIN 4 (sec.)
0 10 20 30
Paint nozzle
Ø mm
1.1
1.3
1.5
1.8
2.1
2.7
100
Air cap
T278
T272
T272
T272
T374
T474
40 50 60 70 80 90
More nozzle/air cap combinations see separate spare part list.
Ord. No.
8611 4040 11
8611 4040 13
8611 4040 15
8611 4040 18
8611 4040 21
8611 4040 27
ECCO 65S/651S/652S HVLP
PRESSURE FEED - ECCO 65S
Pressure feed HVLP-spray gun. Fluid supplied from pressure pots, pumps or circulation system.
Paint nozzles
Paint connection
Air connection
Air pressure
Air consumption
Weight
Viscosity SIS/DIN 4 (sec.)
0 10 20 30 40 50 60 70 80 90
Paint nozzle
Ø mm
0.9
1.1
1.4
1.8
2.1
2,7
100
Air cap
6509
6511
6514
6518
6521
6527
Technical data
0.6 - 2.7 mm
G 3/8
G 1/4 rec. 3 bar approx. 260 l/min
565 g
Ord. No.
8611 6540 09
8611 6540 11
8611 6540 14
8611 6540 18
8611 6540 21
8611 6540 27
SUCTION FEED - ECCO 651S
Suction feed HVLP-spray gun ECCO 651S with 1.0 lit. suction cup
(see page 14 for alternative cups).
Paint nozzles
Paint connection
Air connection
Air pressure
Air consumption
Weight
Viscosity SIS/DIN 4 (sec.)
0
Paint nozzle
Ø mm
1.1
1.4
1.8
2.1
2,7
100 10 20 30 40 50 60 70 80 90
More nozzle / air cap combinations see separate spare part list.
Air cap
6511
6514
6518
6521
6527
Technical data
1.1 - 2.7 mm
G 3/8
G 1/4 rec. 3 bar approx. 260 l/min
947 g
Ord. No.
8611 6541 11
8611 6541 14
8611 6541 18
8611 6541 21
8611 6541 27
GRAVITY FEED - ECCO 652S
Gravity feed HVLP-spray gun with 0.5 lit cup with drip guard
(see page 14 for alternative cups).
Paint nozzles
Air connection
Air pressure
Air consumption
Weight
Viscosity SIS/DIN 4 (sec.)
0
Paint nozzle
Ø mm
0.9
1.1
1.4
1.8
2,1
10 20 30 40 50 60 70 80 90 100
Air cap
6509
6511
6514
6518
6521
Technical data
0.9 - 2.7 mm
G 1/4 rec. 3 bar approx. 260 l/min
653 g
Ord. No.
8611 6542 09
8611 6542 11
8611 6542 14
8611 6542 18
8611 6542 21
8611 6527 27
More nozzle/air cap combinations see separate spare part list.
– 11 –
AIR CAP SELECTION GUIDE
AIR CAP GUIDE FOR LOW PRESSURE SPRAY GUNS
– 12 –
Air cap
T272
T274
T278
T297
T374
M370*
M470*
3503
271
273
275
375
475
T378
T474
6509
6511
6514
6518
6521
6527
Paint nozzle
0.3-1.8
0.3-1.8
0.3-1.8
0.3-1.8
2.1-2.7
2.1
2.7
1.1-1.4
0.8-1.8
0.8-1.8
1.8
2.1
2.7
2.1-2.7
2.7
0.6-0.9
1.1
1.2-1.6
1.8
2.1
2.7
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
480
•
480
•
480
•
460
•
510
•
510
•
510
270
270
270
270
270
270
•
265
•
305
250
380
370
380
385
385
* Round spray cap
AIR CAP GUIDE FOR VARIOUS APPLICATIONS
Air cap
M470
3503
271
273
275
375
475
T272
T274
T278
T297
T374
T378
T474
M370
Paint nozzle
0.3-1.8
0.3-1.8
0.3-1.8
0.3-1.8
2.1-2.7
2.1-2.7
2.7
2.1
2.7
1.1-1.4
0.8-1.8
0.8-1.8
1.8
2.1
2.7
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ACCESSORIES FOR LOW PRESSURE SPRAY GUNS
NOZZLE SET - ECCO 35/352
Nozzle set for all ECCO 35 guns, consists of air cap, fluid nozzle and paint needle.
Standard nozzle set for normal paint types with air cap and fluid nozzle in stainless steel and paint needle in plastic. Special nozzle set for abrasive paint types with air cap, fluid nozzle and paint needle in tungsten carbide
SERVICE KIT
Contains gaskets, seals and other wear components.
Detailed installation instructions included.
Standard nozzle set - for normal paint
Paint nozzle Ø mm
0,9
1,1
1,4
1,8
2,1
2,7
Special nozzle set - for abrasive paint
Paint nozzle Ø mm
1.3
1.4
1.8
ECCO 35
6004 0279 13 (T272)
6004 0279 14 (6578)
6004 0279 18 (T274)
2.1
2.7
6004 0279 21 (T374)
6004 0279 27 (T474)
For ordering separate parts, see spare part lists.
Paint needle is also available in stainless steel.
ECCO 35 / 352
6004 0277 09 (6509)
6004 0277 11 (6511)
6004 0277 14 (6514)
6004 0277 18 (6518)
6004 0277 21 (6521)
6004 0277 27 (6527)
ECCO 352
6004 0278 14 (6514)
6004 0278 18 (6518)
6004 0278 21 (6521)
6004 0278 27 (6527)
NOZZLE SET - ECCO 40S/401S/402S
Consists of air cap, fluid nozzle in stainless steel and paint needle in nylon.
For all manual ECCO 40 spray guns.
For gun ECCO 35/352
For gun ECCO 40S/65S
STRAINER INSERT
Strainer made of nylon. Fits behind the paint nozzle.
For manual ECCO 40S, ECCO 65S models and for ECCO 70AS .
Ord. No.
6003 9095 35
6003 9095 00
Mesh size mesh / µm
60
100
200
250
150
70
Colour
White
Yellow
Black
Qty per set
10
10
10
VISCOSITY CUP DIN 4
Cup made of plastic or aluminum for measuring the viscosity.
Ord. No.
6103 3200 00
6103 3201 00
6103 3202 00
Paint nozzle Ø mm
1.3
ECCO 40
6003 9772 13 (T272)
ECCO 401, 402
6003 9771 13 (273)
1.5
6003 9772 15 (T272) 6003 9771 15 (273)
1.8
6003 9772 18 (T272) 6003 9771 18 (271)
2.1
6003 9772 21 (T374) 6003 9771 21 (375)
2.7
6003 9772 27 (T474)
For ordering separate parts, see spare part lists.
Paint needle is also available in stainless steel and in tungsten carbide.
NOZZLE SET - ECCO 65S/651S/652S
Consists of air cap, fluid nozzle in stainless steel and paint needle in nylon.
For all manual ECCO 65 spray guns.
Plastic
Aluminum
CLEANING BRUSH
For cleaning nozzles and paint channels.
Ord. No.
6803 3567 00
6003 7582 00
Paint nozzle Ø mm
1.1
ECCO 65, 651, 652
6003 9235 11 (6511)
1.4
6003 9237 14 (6514)
1.8
6003 9239 18 (6518)
2.1
6003 9242 21 (6521)
2.7
6003 9246 27 (6527)
For ordering separate parts, see spare part lists.
Paint needle also available in stainless steel and in tungsten carbide.
Diameter, mm
10
17
Ord. No.
6000 8004 00
6000 8001 00
– 13 –
ACCESSORIES FOR LOW PRESSURE SPRAY GUNS
CUPS FOR MANUAL SPRAY GUNS - LOW PRESSURE
Suction cups for ECCO Manual Low Pressure spray guns ECCO
SD 10 aluminum, 1.0 lit., 530 g
SD 15 aluminum, 1.0 lit.
Drop-free diaphragm for SD15 (set of 5 pcs)
6803 4867 00
6003 9714 00
6003 9684 00
Gravity cups for ECCO Manual Low Pressure spray guns
Plastic cup G6, 0,6 lit. (for spray gun Ecco 35)
Plastic cup G5, 0.5 lit.
Plastic cup G1, 0.125 lit.
Paint filter for gravity cup 100 Mesh
Adapter for 3M Cup (for spray guns Ecco 40/65)
Adapter for 3M Cup (for spray gun ECCO 35)
Ord. No.
6101 5560 86
6101 5560 00
6101 5560 95
6003 9752 05
6004 0065 00
6004 0065 35
AIR FILTER/PRESSURE REGULATOR
D r y a n d c l e a n a i r a t a c o n s t a n t pressure is an important factor to achieve a good result when spraying. LR 510 R is an efficient combined air filter, water trap and pressure regulator. Compact design and easy maintenance ensures high reliability. It is easy to install, and is equipped with air regulator and gauge. Two guns can be connected at the same time. The air filter will collect particles larger than 15 µm.
Technical data
Inlet connection thread
Outlet connection thread
Max. working pressure
Capacity at a primary circuit pressure at 6 bar
- primary
- secundary
LR 510 R
G1/2 female
G 1/4 male
14 bar
8 bar
1 500 l/min
Ord. No.
8202 0212 52
STRAINER SET FOR PAINT CUPS
Fits on the suction pipe with outside diam. 9 -12 mm.
Size 80 mesh, 10 pcs. per set.
For cup PRC2, SD10, SD 15
Ord. No.
6003 7886 00
PRC MINI & PRC 2, PAINT CUPS
Pressure cup for ECCO Manual Low Pressure spray guns
PRC Mini, 2.0 lit.
PRC 2, 2.5 lit.
Ord. No.
8622 0200 00
8622 0100 00
– 14 –
ECCO HOSES FOR LOW PRESSURE
ECCO ERGOTUBE - THE ERGONOMIC WAY OF SUPPLYING PAINT
ECCO Ergotube is a unique system to supply air and paint to the spray gun through a patented combo-hose, where the paint hose is placed inside the air hose. The
ECCO Ergotube™ solution reduces the total weight and twist torque, making the handling of the gun much easier for the painter. The ECCO Ergotube hose can be used for most types of paint (primer, base-, top- and clear coat) as the material of the paint hose reduces the risk of contamination in the final coating of the surface. The paint hose in teflon (FEP as standard in Ø 4-6 mm internal) makes flushing easier and reduces the use of solvent. The special finish on the outer surface of the air hose prevents paint from adhering to it, making cleaning easier. Also available with paint hose in PTFE.
Length, m
2
3
4
6
7
5
6
Rec fluid viscosity, sec. SIS/DIN 4
0-50
0-30
0-45
0-30
0-27
0-40
0-25
8
10
0-30
0-25
Other sizes available on request.
Dimension air hose/paint hose
Ø 10 mm (3/8”) / Ø 8/6 mm
Ø 10 mm (3/8”) / Ø 6/4 mm
Ø 10 mm (3/8”) / Ø 8/6 mm
Ø 10 mm (3/8”) / Ø 6/4 mm
Ø 10 mm (3/8”) / Ø 6/4 mm
Ø 10 mm (3/8”) / Ø 8/6 mm
Ø 10 mm (3/8”) / Ø 6/4 mm
Ø 10 mm (3/8”) / Ø 8/6 mm
Ø 10 mm (3/8”) / Ø 8/6 mm
Paint connecting nipple for Ergotube™
Dimension hose
Ø 4/6 mm
Ø 6/8 mm
Ord. No.
6003 9798 02
6003 9796 03
6003 9798 04
6003 9796 05
6003 9796 06
6003 9798 06
6003 9796 07
6003 9798 08
6003 9798 10
Ord. No.
6101 5021 91
6101 5021 92
THROTTLE VALVE
To be mounted on the air inlet of the gun.
Connection threads: G 1/4 female - G 1/4 male.
AIR HOSE/COUPLING
Despite its strength it is flexible enough to accompany the gun movements.
Per metre or in standard 8 m lengths incl. couplings G 1/4 female with cap nut.
For ECCO spray guns 40S, 401S, 402S, 65S, 651S, 652S, 35, 352
PAINT AND AIR VALVES
6.3
8.0*
Inside Ø mm/inch
1/4
5/16
9.5
* Recommended.
3/8
Ord. No.
per metre
6803 6686 00
6003 7346 00
6803 6687 00
Ord. No.
coupling G 1/4
6001 1235 00
6003 7338 00
6001 1239 00
Ord. No.
compl. 8 m
6003 7363 08
6203 1460 08
PAINT HOSE/COUPLING
ECCOflex is resistant to paints solvents, weak acids or water at temperatures of up to +100°C. Outer sheating of reinforced polyester and the inne hose of nylon.
Per metre or L= 8 m, incl. coupling G 3/8 female with cap nut.
Connection thread
G 1/4 male
G 3/8 male
G 1/4 female
Hole Ø mm
6
9
7
Max. working pressure, bar
40
40
40
CONNECTING NIPPLE
Jointing nipples with cone for hose coupling.
Ord. No.
6003 8002 00
Ord. No.
6803 0300 00
6803 0301 00
6003 7774 00
6.3*
Inside Ø mm/inch
1/4
9.5
* Recommended.
3/8
Ord. No.
per metre
6803 6684 00
6803 6685 00
Ord. No.
coupling G 3/8
6003 5629 00
6001 1241 00
Ord. No.
compl. 8 m
6003 7366 08
6003 7369 08
Thread male
G 1/4 - G 1/2
G 3/8 - G 1/4
M 14x1 - G 1/4
Hole Ø mm
7
7
8
Material
Stainless Steel
Stainless Steel
Stainless Steel
Ord. No.
6002 0236 46
6002 0238 46
6102 9314 46
– 15 –
ECCO SPRAY PACKS
READY-TO-USE SPRAYING UNITS
ECCO FEED SPRAY PACKS
The ECCO Feed Spray Pack are using air powered piston or diaphragm pump. Compact and light equipment, ready-to-use and easy to clean.
ECCO FEED SPRAY PACK CONSISTS OF:
• Paint feeding pump with silencer and strainer
• Paint pressure regulator with gauge for precise settings of the paint pressure. The regulator also works as a pulsation damper
• Reduction valve with gauge for precise settings of the air pressure
• An ECCO 35 including a paint nozzle and air cap that can handle the most common fluids
• All necessary valves, hoses and couplings
• Earthing device
SPRAY PACK 313E
SPRAY PACK 314B
Spray Pack 313E
Spray gun ECCO 35
Pressure Cup PRC mini 2,0 l
ECCO Ergotube 1,5m
– 16 –
Ord. No.
8613 2311 50
8611 3548 14
8622 0200 00
6003 9900 61
Spray Pack 314B
Spray gun ECCO 35
Pressure Tank P10R
ECCO Ergotube 5 m
Ord. No.
8613 2311 51
8611 3548 14
8622 0216 09
6003 9796 05
ECCO SPRAY PACKS
READY-TO-USE SPRAYING UNITS
SPRAY PACK 315 (DIAPHRAGM)
SPRAY PACK 317 (PISTON)
For all types of paint. Mounted on a tubular steel frame, bracket for wall mounting or on a lid for 20 lit. container. Max. air pressure 8 bar. Max paint pressure 8 bar.
For all types of paint. Mounted on a tubular steel frame, bracket for wall mounting or on a lid for 20 lit. container. Max. air pressure 8 bar. Max paint pressure 4 bar.
The Spray Pack consists of:
• Paint feeding unit: ECCO PSU AL15
•
•
Spray gun: ECCO 35
ECCO Ergotube: 5 m
The Spray Pack consists of:
•
•
•
•
Paint feeding unit: ECCO PSU A2
Spray gun: ECCO 35
Paint hose 8 m
Air hose: 8 m
With spray gun ECCO 35:
Spray Pack 315 (steel frame)
Spray Pack 315L (lid for container 20 lit.)
Spray Pack 315B (for wall mounting)
Optional equipment:
Wheel set for Spray Pack 315 (to be mounted on the steel frame)
Ord. No.
8613 2311 61
8613 2311 62
8613 2311 63
Ord. No.
6004 0169 70
With spray gun ECCO 35
Spray Pack 317 (steel frame)
Spray Pack 317L (lid for container 20 lit.)
Spray Pack 317B (for wall mounting)
Optional equipment:
Wheel set for Spray Pack 317 (to be mounted on the steel frame)
Ord. No.
8613 2311 70
8613 2311 71
8613 2311 72
Ord. No.
6004 0169 70
– 17 –
ECCO AIRLESS PAINT SPRAYING
- FOR APPLYING THICK COATS ON LARGE AREAS
WHAT IS AIRLESS SPRAY PAINTING?
At airless spray painting, paint is fed at high pressure from a pump to spray gun. Due to the high paint pressure, the paint is atomised as it passes the spray tip of the spray gun. The airless spray painting method is particularly suitable for applying thick coats on large areas. It is by far the most popular method for the anti-corrosion treatment of steel structures and for painting the insides and outsides of buildings. It is also used by the manufacturing industry to paint furniture, machines etc. sometimes in combination with hot spray painting.
ADVANTAGES
• High production capacity
• Good coverage of surface depressions
• Thick coat of paint in a single pass
• High viscous paints can be sprayed
APPLICATIONS
• Ship building
• Corrosion protection
• Train / Railways
MATERIAL
• Water- and solvent borne materials
• High solid coatings
• Anti corrosive coatings
WHAT IS AIR ASSIST?
Air Assist spray painting first partially atomizes the fluid with a special fluid nozzle tip similar to a standard airless tip. Second, they complete the atomization with small amounts of compressed air from the face and/ or the horns of the air nozzle that they use. The result is a finely atomized spray pattern closely resembling that of a compressed air system.
ECCO 360
The paint is supplied from a high pressure pump and is atomized by the spray tip. Additional air meets the spray fan at the tip to ensure a smooth-edged spray pattern. Air Assist spraying gives a soft spray patern with high finish, high capacity and less spray mist.
Air Assisted Automatic gun
ADVANTAGES
• Easy to adjust spray pattern with high paint pressure
• Soft spray pattern with high finish
• High capacity and less spray mist
APPLICATIONS
• Wood
• Steel
MATERIAL
• Water- and solvent borne materials
• Acid-curing laquer
• Polyurethane
• 2-component paints
• Stain
• UV-hardening materials
•
• UV-
ECCOMiX
Airless Spray Pack
– 18 –
ECCO 380A & 380 AA
THE AUTOMATIC AIRLESS OR AIR ASSISTED GUN FOR ROBOTS
ECCO 380A and 380AA are automatic Airless and Air Assist spray guns, designed to fit most types of high-pressure applications in automated production lines. Valve seat and needle tip is made in tungsten carbide for long durability. Both guns can be changed in less than two minutes without any loss in mechanical precision or performance. Material circulation is provided through the manifold even when the gun is in closed position. A wide variety of spray tips are available for all types of applications, with a perfect finish of the treated surface.
• Air and fluid supply fittings in one compact manifold for optimum hose package design
• Prepared for material circulation
• Can also be delivered with air closing
ECCO 380AA - AIR ASSIST (page 19)
ECCO 380AA, is an automatic Air Assisted spray gun, designed to fit most types of applications in automated production lines, especially wood and steel industry.
ADVANTAGES ECCO 380A & 380AA
• Long life time due to high mechanical precession and carefully selected materials
• Fast closing due to air and spring operated closing action
• All components in contact with fluid are in stainless steel.
• Easy access to vital parts and for easy maintenance
• Flexible mounting arrangements - single mount, side by side or twin mount (only for 380A)
ECCO 380A - AIRLESS (page 20)
ECCO 380A is suitable for cold as well as hot industrial spraying, where high finish is required. It is available with or without nozzle fix in step of 30, 45 or 90 degrees. Sealing rings and o-rings made in
FEP material for waterborne paint and UV paint, alternately sealing rings and o-rings in perflour 128 for higher demands.
ECCO 380AA AUTOMATIC SPRAY GUN, AIR ASSIST
Technical data
Net weight
Maximum paint pressure
Min/max. operating pressure
Connection for spray tip retaining ring
Packing / seals
0,97 kg
250 Bar
4/7 bar
M 36x1
Viton / Perflour 128
Type
ECCO 380AA - nozzle fix2 PF
ECCO 380AA - nozzle fix2 FPM
ECCO 380AA - nozzle fix2 FPM UV-paint
ECCO 380AA - nozzle fix2 PF material circulation
ECCO 380AA - nozzle fix2 FPM material circulation
ECCO 380AA - nozzle fix2 FPM material circulation UV-paint
For other combinations, please contact your nearest retailer of ECCO Products.
Ord. No
8611 4138 01
8611 4138 02
8611 4138 22
8611 4138 11
8611 4138 12
8611 4138 13
Selection guide for spray tips see page 25
SINGLE MANIFOLD ECCO 380AA
Prepared for material circulation.
Technical data
Material inlet/return
Pilot air 6/4 push in couplings
Atomization / Fan air 8/6 Push in couplings
Type
Gun manifold single
GUN BRACKET ECCO 380AA
Gun bracket for the ECCO 380AA, designed for paint robots with hollow wrist. Detachable cover for easy access to the hose couplings. Paint hoses well protected all the way from the gun and through the inside of the robot arm. All parts are made in stainless steel high gloss polished gives a surface easy to clean. Complete with push in couplings for pilot air and swivelling couplings for the material, and prepared for material circulation.
1/4” - 18 / 1/4” - 18
1/8”
1/8”
Ord. No
6004 0158 31
Type
Gun bracket for Motoman PX2850
Gun bracket for ABB enhanced hollow wrist
Ord. No
6004 0104 48
6004 0104 52
– 19 –
ECCO 380A AND 320A - AIRLESS GUNS
ECCO 380A AUTOMATIC SPRAY GUN, AIRLESS
Technical data
Net weight
Maximum paint pressure
Min/max. operating pressure
Connection for spray tip retaining ring
Packing / seals
0,81 kg
250 Bar
4/7 bar
M 18x1
Viton / Perflour 128
Type
ECCO 380 A - nozzle fix PF
ECCO 380A - nozzle fix FPM
ECCO 380A - nozzle fix FPM UV-paint
Ord. No
8611 4115 01
8611 4115 02
8611 4115 71
ECCO 380AC - nozzle fix PF material circulation
ECCO 380AC - nozzle fix FPM material circulation
8611 4115 61
8611 4115 62
ECCO 380AC - nozzle fix FPM material circulation UV-paint
8611 4115 76
For other combinations, please contact your nearest retailer of ECCO Products.
SINGLE/TWIN MANIFOLD ECCO 380A
Mounting manifold for single ECCO
380A, also available for side by side
- mounting. Side by side mounting gives possibility to feed and circulate two different materials to the guns.
Mounting manifold for twin mounted ECCO 380A. Air connectors for opening and closing the guns. Material circulates through both the guns.
GUN BRACKET FOR ECCO 380A
Gun bracket for ECCO 380A, designed for paint robots with hollow wrist. Detachable cover for easy access to the hose couplings. Paint hoses well protected all the way from the gun and through the inside of the robot arm. All parts are made in stainless steel high gloss polished gives a surface easy to clean. Complete with push in couplings for pilot air and swivelling couplings for the material, and prepared for material circulation.
Technical data
Material inlet/return
Pilot air 6/4 push in couplings
Type
Gun manifold single
Gun manifold single, side by side
Gun manifold twin
Single manifold
1/4” - 18 / 1/4” - 18
1/8”
Twin manifold
3/8” * 3/8”
1/8”
Ord. No
6004 0159 98
6004 0159 99
6004 0159 83
Type
Gun bracket for Fanuc
Gun bracket for Motoman PX2850
Gun bracket for ABB enhanced hollow wrist
ECCO 320A - THE RELIABLE AUTOMATIC SPRAY GUN
ECCO 320A is a automatic spray gun with air-operated remote control. The needle valve is opened by an air operated piston and closed by a powerful coil spring. All components in contact with paint are made in stainless steel. Valve seat and needle tip are made in tungsten carbide for long durability. The gun is prepared for paint circulation when hot spraying. ECCO 320A can also be used as a qualified fluid valve, for example in colour changing systems and other applications with high demands for short reaction time and reliability.
Technical data
Net weight
Maximum paint pressure
Min/max. air pressure
Paint connection
Connection for spray tip retaining ring
Operating air connector is designed for nylon hose
545 g
360 bar
6/8 bar
1/4” 18NPSM male
M 18x1
Ø 6/8 mm
Type
ECCO 320A
Ord. No.
8611 4114 17
Ord. No
6004 0104 33
6004 0104 49
6004 0104 53
– 20 –
MANUAL AIRLESS SPRAY GUNS
ECCO 360 – THE AIRLESS SPRAY GUN
The ECCO 360 is a well tried spray gun which is suitable for most applications. All parts in contact with paint are made in stainless steel. The valve seat and needle tip are made in tungsten carbide for long durability. The paint channels in stainless steel are designed as a protection guard in front of the trigger. This makes this gun also suitable for hot spraying. The trigger force is low and can be adjusted to match the actual paint pressure. The ECCOflex airless hose is recommended for the 360 spray guns.
Technical data
Maximum paint pressure
Paint connection
Connection for spray tip retaining ring
Type
ECCO 360 - with 2-finger trigger
ECCO 360C - with double paint channels for circulation
Note! No spray tip is included, for alternative spray tips see pag 23-24.
360 bar
1/4” 18NPSM male
M 18x1
Ord. No.
8611 4116 05
8611 4116 10
ECCO 370 – THE AIRLESS SPRAY GUN
ECCO 370 airless spray gun is suitable for cold as well as hot spraying of all fluids. The spray gun is extremely easy to operate thanks to the servo operated paint needle which is activated by the trigger. The fast shut off action of the paint needle also decreases the risk of drip in the beginning and in the end of the painting cycle. The
ECCO 370R spray gun is equipped with external paint pipe which also serves as trigger guard. The gun body is short and is therefore useful in confined spaces where other spray guns have difficulties working. All parts in contact with paint are made in stainless steel. Valve seat and needle tip are made in tungsten carbide for long durability. The ECCO 370 spray gun suits both right- and left handed painters. The spray gun is specially designed for car body cavity spraying. For best ergonomics the airless hose ECCO ERGOTUBE™ Hp is recommended.
Note! No spray tip is included, for alternative spray tips see page 23-24
Technical data
Maximum paint pressure
Min/max. operating pressure
Paint connection
Operating air connector
Connection for spray tip retaining ring
360 bar
6/8 bar
1/4” 18NPSM male
G 1/4
M 18x1
Type
ECCO 370 - basic servo assisted spray gun
ECCO 370R - suits control system requiring 3/2 valve
ECCO 370R - suits the ECCO timer P requiring 2/2 valve
Ord. No.
8611 4170 05
8611 4170 50
8611 4170 51
Note! No spray tip is included, for alternative spray tips see pag 23-24.
– 21 –
MANUAL AIRLESS AND AIR ASSIST SPRAY GUNS
ECCO 510 – THE CONTRACTOR AIRLESS SPRAY GUN
The ECCO 510 is a multi-purpose manual high-pressure spray gun with exchangeable paint filter in the spray gun handle. The gun features an integrated swivel coupling for connection to the paint hose to provide optimum freedom of movement when spraying in confined spaces. The 4-finger trigger makes the gun easy to operate also when using protection gloves. ECCOflex airless hose is recommended for the
ECCO 510 spray gun.
Note! No spray tip included, for alternative spray tips see page 23-24:
Technical data
Maximum paint pressure
Paint connection
Connection for spray tip retaining ring
Type
ECCO 510
350 bar
1/4” 18NPSM male
11/16”-16
Ord. No.
8611 4119 05
ECCOMix
THE AIR ASSIST SPRAY GUN WITH MULTIPLE FUNCTIONS FOR HIGH SURFACE FINISH
ECCOMix
The ECCOMix spray gun is using Air Assist technique; the air cap has unique injector technology which gives excellent atomisation and high surface finish. The force of the paint needle spring is adjustable for paint pressures from 80 bar up to 250 bar, this gives lowest possible trigger force. Separate regulations for round and flat jet, ensures optimal adjustment possibilities. Adjustable needle sealing in PTFE, air and paint inlet with swivelling connections. The gun is delivered with paint nozzle size 0,33 mm with
40 degrees spraying angle.
For alternative spray tips see page 25
Technical data
Maximum paint pressure
Paint connection
Air connection
Type
ECCOMix
250 bar
1/4” 18NPSM male
G 1/4”
Ord. No.
8611 4120 00
– 22 –
AIRLESS SPRAY TIPS
ECCOMANT - STANDARD SPRAY TIP
The ECCOMANT tungsten carbide airless tips are manufactured to high standards of accuracy to ensure an accurate spray fan and promote long service life. The tips can be used with all ECCO airless spray guns as well as other spray guns. The tip is held by the retaining ring of the gun.
The ECCOMANT spray tips has proven to be extra wear resistant compared to normal industry standard tips The table below on this pag sets out the recommended tips for different types of paint together and the list below shows the standard sizes normally available for of-the-shelf delivery.
ECCO QUICK-TIP - SELF CLEANING SPRAY TIP
The ECCO Quick-TIP can easily be cleaned by turning the tip 180° and a short paint blast will clear the spray tip orifice. The spray tip handle has an arrow, showing the spraying direction. ECCO Quick-TIP is manufactured from the highest quality tungsten carbide and stainless steel to ensure long lifetime in production. The holder for ECCO
Quick-TIP is available with thread that suits all airless spray guns.
HOW TO SELECT YOUR SPRAY TIP
SELECTION OF SPRAY TIP
Recommend spray tips for different paint types. For other paint types, please contact your nearest retailer of ECCO Products.
Paint type
Lacquer
Shop primer
Polyurethane
Alkyd lacquer
Zinc epoxy
Modified vegetable oil
Epoxy tar
Latex paint
Solvent free epoxy
Normal spray viscosity
(sec. with SIS cup 4)
15 – 20
13-25
25-60
30-60
25-60
60-100
30 - 100
NORMALLY UNTHINNED
40 -
0,009
•
0,011
•
•
•
•
•
0,013
•
•
•
•
•
Recommended tips, inch
0,015 0,018 0,021 0,026
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
0,031 0,036
•
•
•
•
•
•
– 23 –
AIRLESS SPRAY TIPS
SELECTION GUIDE FOR ECCOMANT & QUICK-TIP
Orifice diameter inch mm
0,011
0,013
0,015
0,018
0,021
0,023
0,026
0,031
0,036
0,28
0,33
0,38
0,46
0,53
0,58
0,66
0,79
0,91
65°
80°
95°
110°
25°
25°
40°
50°
65°
80°
95°
110°
40°
40°
50°
65°
80°
95°
110°
50°
65°
80°
95°
110°
40°
50°
65°
80°
95°
110°
Fan angle ¹
15°
25°
40°
50°
65°
80°
95°
110°
25°
40°
50°
50°
65°
80°
95°
110°
25°
40°
50°
65°
80°
95°
15°
25°
40°
50°
65°
80°
95°
110°
15°
25°
40°
Capacity ² litre/minute
0,54
0,82
1,15
1,64
2,14
2,40
3,24
5,00
6,37
Capacity ² gallons/minute
0,14
0,22
0,30
0,43
0,56
0,63
0,86
1,32
1,68
60
60
60
60
60
60
60
30
60
60
60
60
60
60
30
30
30
30
60
60
60
60
60
30
30
30
30
30
30
30
Strainer ³, mesh
200
200
200
200
200
100
100
100
60
60
60
100
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
200
100
100
100
STANDARD SPRAY TIP
ECCOMANT
6803 1115 00
6803 1125 00
6803 1140 00
6803 1150 00
6803 1165 00
6803 1180 00
6803 1195 00
6803 1315 00
6803 1325 00
6803 1340 00
6803 1350 00
6803 1365 00
6803 1380 00
6803 1395 00
6803 1311 00
6803 1515 00
6803 1525 00
6803 1540 00
6803 1550 00
6803 1565 00
6803 1580 00
6803 1595 00
6803 1511 00
6803 1825 00
6803 1840 00
6803 1850 00
6803 1865 00
6803 1880 00
6803 1895 00
6803 1811 00
6803 2125 00
6803 2140 00
6803 2150 00
6803 2165 00
6803 2180 00
6803 2195 00
6803 2111 00
6803 2350 00
6803 2365 00
6803 2380 05
6803 2395 00
6803 2311 00
6803 2625 00
6803 2640 00
6803 2650 00
6803 2665 00
6803 2680 00
6803 2695 00
6803 2611 00
6803 3140 00
6803 3150 00
6803 3165 00
6803 3180 00
6803 3195 00
6803 3111 00
6803 3640 00
6803 3650 00
6803 3665 00
6803 3680 00
6803 3695 00
6803 3611 05
1. When spraying water 2. Capacity at a fluid pressure of 140 bar, when spraying water 3. Recommended strainer in delivery circuit
For other sizes, please contact your nearest retailer of ECCO Products.
ECCO QUICK-TIP
6827 0211 00
6827 0311 00
6827 0411 00
6827 0511 00
6827 0611 00
6827 0213 00
6827 0313 00
6827 0413 00
6827 0513 00
6827 0613 00
6827 0326 00
6827 0426 00
6827 0526 00
6827 0826 00
6827 0531 00
6827 0631 00
6827 0436 00
6827 0636 00
6827 0836 00
6827 0315 00
6827 0415 00
6827 0515 00
6827 0615 00
6827 0815 00
6827 0318 00
6827 0418 00
6827 0518 00
6827 0618 00
6827 0818 00
6827 0321 00
6827 0421 00
6827 0521 00
6827 0621 00
6827 0821 00
6827 0323 00
6827 0423 00
6827 0523 00
– 24 –
ECCOMIX SPRAY TIPS
ECCOMIX SPRAY TIP
Orifice diameter inch mm
0.009
0,23
0011
0,013
0,015
0,28
0,33
0,38
Fan angle *
20°
40°
60°
20°
40°
60°
20°
40°
60°
20°
40°
60°
ECCOMIX SPRAY TIP
6810 0920 00
6810 0940 00
6810 0960 00
6810 1120 00
6810 1140 00
6810 1160 00
6810 1320 00
6810 1340 00
6810 1360 00
6810 1520 00
6810 1540 00
6810 1560 00
* When spraying water
ECCOMANT – AIR ASSIST SPRAY TIP
Tungsten carbide nozzle designed for the ECCO 380AA, manufactured to high standards of accuracy for long lifetime and a precise spray pattern.
The tip is held in correct position by the air cap and the retaining ring. Use the table on page 11 for selection of the right tip, different paint and viscosity demands different nozzle sizes.
Orifice diameter inch mm
0.011
0.013
0.015
0.017
0.019
0,28
0,33
0,38
0,43
0,48
Fan angle ¹
20°
30°
50°
60°
80°
40°
80°
20°
30°
40°
30°
40°
50°
60°
40°
50°
60°
20°
50°
60°
80°
40°
50°
60°
80°
Capacity ² litre/minute
0.54
0.82
1.15
1.50
1.91
Capacity ² gallons/minute
0,14
0,22
0,30
0,40
0,54
Strainer ³, mesh
200
200
100
100
100
100
200
100
100
100
200
200
200
200
200
200
200
200
100
100
100
100
100
100
100
1. When spraying water 2. Capacity at a fluid pressure of 140 bar, when spraying water 3. Recommended strainer in delivery circuit
For other sizes, please contact your nearest retailer of ECCO Products.
AIR ASSIST SPRAY TIP
ECCOMANT
6814 1120 00
6814 1130 00
6814 1140 00
6814 1150 00
6814 1160 00
6814 1320 00
6814 1330 00
6814 1340 00
6814 1350 00
6814 1360 00
6814 1380 00
6814 1520 00
6814 1530 00
6814 1540 00
6814 1550 00
6814 1560 00
6814 1580 00
6814 1740 00
6814 1750 00
6814 1760 00
6814 1780 00
6814 1940 00
6814 1950 00
6814 1960 00
6814 1980 00
– 25 –
AIRLESS SPARE PARTS
SPRAY TIP HOLDER ECCO QUICK-TIP
Holder for spray tip ECCO Quick TIP
.
PAINT STRAINERS FOR AIRLESS GUNS
Paint strainers for spray guns ECCO 510, 370F and 360F.,
Thread
7/8” - 14
11/16” - 16
M18x1
For spray gun
Graco
ECCO 510, spraying systems, Graco, Blinks,
ECCO 320A / 360 / 370, Deicke & Kopperschmidt
Ord. No.
8611 4150 07
8611 4150 11
8611 4150 18
Mesh aperture mesh
60
100
200 micron
250
150
75
Suitable for tips with equivalent orifice diam.
≥ 0.019
0.015 - 0.018
0.011 - 0.013
Ord. No.
6803 3516 00
6803 3575 00
6803 3517 00
PAINT STRAINERS FOR ECCOMIX GUNS
Paint strainers for EccoMix spray gun.
AIRLESS TIP CLEANING NEEDLES
Easy way to clean blocked airless tips.
12 pieces included.
Type
Airless tip cleaning needles
Ord. No.
6003 8001 00
Mesh aperture mesh
50
80
150
295 micron
300
180
95
50 green white yellow red
Ord. No.
6803 3075 00
6803 3075 05
6803 3075 10
6803 3075 15
WET FILM GAUGE
Measuring range:
25 - 300 µm in steps of 25 µm
350 - 750 µm in steps of 50 µm
900 - 2000 µm in steps of 150 µm
Type
Wet film gauge
Ord. No.
6802 3558 00
– 26 –
AIRLESS HOSES AND CONNECTIONS
ECCOFLEX AIRLESS HOSE
Properties:
• Excellent resistance to paints,
•
•
•
•
•
• solvents and chemicals.
Excellent flexibility
Extreme abrasion resistance
Static freed - 100% conductivity
Light weight
UV and ozone resistant
Diam inside mm inch
6,3
9,5
1/4
3/8
Max working pressure, bar.
325
400
Stand.
length m
8
10
Inner tube: Polyamide
Reinforcement: Carbon steel wire brass plated
Cover: Polyurethane
Temp. range: -40°C to +80°C
C o n n e c t i o n thread, mm
1/4” 18NPSM
1/4” 18NPSM
Ord. No.
6803 0745 08
6803 2082 10
ECCO ERGOTUBE HP AIRLESS HOSE
ECCO ERGOTUBE™ Hp for use with all servo assisted spray guns 370. The high pressure paint hose is placed inside the air hose which leads the operating air to the spray gun.
The gun is as easy to use as when using only one hose to the spray gun.
Technical data
Paint pressure
Inside diameter paint hose:
Inner hose:
Reinforcement:
Cover:
Temp.range:
Length:
Type
ECCO ERGOTUBE™ Hp max. 400 bar
4 mm
Polyamide airless hose
Braided synthetic fibres
Polyurethane
-40°C to +80°
2-10 meter
Ord. No.
6003 9870 xx
For ECCO hoses; other lengths are available. Add two-digit designation for desired hose length to the actual ordering number. Example: 6803 0745 04 (for 4 m hose).
WHIP END HOSES
Whip end for connection immediately before the gun for increased mobility.
Length: 1 m. Connection thread: 1/4” 18NPSM female - male.
Diam.mm
3,2
4,6
Inside.inch
1/8
3/16
Ord. No.
6803 4920 00
6803 1741 00
SWIVEL COUPLINGS FOR
HIGH PRESSURE HOSES
To be mounted between the gun and the hose for icreased mobility.
(Not intended for ECCO 510 or ECCO ERGOTUBE™ Hp.)
TEFLON HOSE
Airless hose resistent for particularly aggressive fluids. Couplings and braid in stainless steel. Material inside hose wall: Teflon.
Connection thread: 1/4” 18NPSM female.
Diam. mm
6,3
Inside. inch
3/16
Max working pressure, bar.
175
Length m
7,5
Max. bending radius, mm
60
Ord. No.
6201 9264 00
Connection thread male female
1/4” 18 NPSM 1/4” 18NPSM
1/4” 18 NPSM 3/8” NPT
Mesh aperture mesh mm without strainer without strainer
Working press. max
400 bar
400 bar
Ord. No.
6803 5292 00
6803 5664 00
TWIN HOSE PAINT/AIR
Twin hose for use with Air Assisted spray guns.
Inner tube: Polyamide
Cover: Polyurethane
Jointing and connection nipples for high pressure hoses.
NIPPLES
mm
Paint 4,6
Air
Diam inside
6,4 inch
3/16
1/4
Max working pressure, bar.
235
10
Stand.
length m
10
10
C o n n e c t i o n thread, mm
1/4” 18NPSM
G1/4”
Ord. No.
6003 7092 10
Connection thread
1/4” 18 NPSM male - 1/4” 18NPSM male
G 1/4 male - 1/4” 18NPSM male
G 3/8 male - 1/4” 18NPSM male
1/4” 18NPT male - 3/8” NPT male
G 1/4 male - G1/2 male
Bore mm
5
5
7
7
7
Material
Stainless
Stainless
Stainless
Steel
Stainless
Ord. No.
6002 0234 00
6002 0233 00
6202 2197 00
6803 5666 00
6002 0236 46
– 27 –
ECCO POWER FLOW SPRAY PACKS
- READY-TO-USE SPRAYING UNITS
ECCO SPRAY PACKS
ECCO offers a unique pneumatic driven pump range for airless and Air Assisted application of low and middle viscosity products. Spray Pack ECCO Power Flow is a complete set containing all required parts for quick and easy start-up. We give advice about what model and which nozzles that would be suitable for your specific application. The high pressure hose is delivered in standard length, but it can be adapted to customer’s demands. The high pressure spray gun is delivered with standard nozzle, swivelling coupling and whip end hose for good ergonomics. The
Spray Packs ECCO Power Flow are delivered on a trolley.
– 28 –
SPRAY PACK ECCO POWER FLOW 214S AA
Spray Pack ECCO Power Flow is a complete set containing all required parts for quick and easy startup. We give advice about what model and which nozzles that would be suitable for your specific application. The hose is in a standard length of 10m but can be adapted to customer’s demands. Spray Pack ECCO Power Flow 214S AA includes hose and spray gun (ECCOMix). It produces a smooth finish, and can be used on many applications. Air Assist spraying is versatile; the operator can vary air volume, paint pressure, and spray pattern.
Ord. No.
Pump Unit
Spray Gun
Spray Tip
Twin hose paint/air
Weight (Kg)
8613 2321 35
ECCO POWER FLOW 214S-T-AA
ECCOMix
0,013” / 40°
3/16” / 1/4” 10M
For other combinations, please contact your nearest retailer of ECCO Products.
27
Spray Pack
ECCO Power Flow 328S-A
HIGH PRESSURE SPRAY PACKS
SPRAY PACK ECCO POWER FLOW 328S A
A ready to use unit complete with regulators hose and spray gun. Spray Pack ECCO Power Flow 328S A includes a high pressure spray gun ECCO 360 with standard nozzle, swivelling coupling and whip end hose for good ergonomics.
Ord. No.
Pump Unit
Spray Gun
Spray Tip
Airless hose
Twin hose paint/air
Whip-end hose
Swivel coupling
Weight (Kg)
8613 2321 38
ECCO POWER FLOW 328S-T-A
ECCO 360
0,015” / 50°
1/4” 10M
--------
1/8” 1M
1/4” 18 NPSM - 1/4” 18 NPSM
26,5
For other combinations, please contact your nearest retailer of ECCO Products.
SPRAY PACK ECCO POWER FLOW 328S AA
A ready to use unit complete with regulators hose and spray gun. Spray Pack ECCO Power Flow 328S AA includes high pressure spray gun ECCOMix with standard nozzle, swivelling coupling and whip end hose for good ergonomics.
Spray Pack
ECCO Power Flow 328S-AA
Ord. No.
Pump Unit
Spray Gun
Spray Tip
Airless hose
8613 2321 39
ECCO POWER FLOW 328S-T-AA
ECCOMix
0,013” / 40°
------
Twin hose paint/air
Whip-end hose
Swivel coupling
Weight (kg)
3/16” / 1/4” 10m
-----
------
28,5
For other combinations, please contact your nearest retailer of ECCO Products.
SPRAY PACK ECCO POWER FLOW 640S A
Spray Pack ECCO Power Flow 640S A is a complete set containing all required parts for quick and easy start-up. The high pressure hose is delivered in standard length but can be adapted to customer’s demands.The high pressure spray gun is delivered with standard nozzle, swivelling coupling and whip-end hose for good ergonomics.
Artiklenr
Pump unit
Spray gun
Spray tip
Airless hose
Whip-end hose
Swivel coupling
Weight (kg)
8613 2322 78
ECCO POWER FLOW 640S-T-A
ECCO 360
0,015” / 50°
1/4” 10M
For other combinations please contact your nearest retailer of ECCO products..
1/8” 1M
1/4” 18 NPSM - 1/4” 18 NPSM
31,5
– 29 –
ELECTROSTATIC LOW PRESSURE
ECCO XTATIC 6000 LOW PRESSURE
ECCO Xtatic LP6000 – is the lightest and most compact low pressure electrostatic. Also Xtatic LP6000 offers you unmatched high transfer efficiency and is very environment friendly. The high transfer efficiency provides reduces paint consumption, high class finishing, minimizes over spray inside the paint booth, and thus reduces the operation costs. The guns gives maximum operator comfort, by reduced weight, size and trigger pull, and combined with the high transfer efficiency it reduces the paint work cycle and improves production efficiency. With Xtatic LP6000 you can apply a large variation of paints, including metallic and water born paints. Xtatic LP6000 is ATEX approved for operation in all safety.
Complete gun including control unit, air cap, nozzle, air hose and cable (Note! No paint hose included)
ECCO XTATIC LP 6000 W - for water based paint. (Needs to be isolated from the environment)
ECCO XTATIC LP 6000 S - for solid paint
ECCO XTATIC LP 6000 M - for metallic paint
KEY ADVANTAGES FOR ECCO XTATIC LP6000
Light and compact = Ergonomic
• Only 545 g weight
• Easy to handle due to small size
• Low operator fatigue due to low weight and low trigger pull
High transfer efficiency = Save cost
• High transfer efficiency due to new air cap design
• Reduced paint consumption
• Reduce paint work cycle
• Minimizing overspray thus reduce maintenance costs
High quality finish
• Air cap design atomizing at very low pressure gives top finish
• Superb wrap around effect and soft atomisation
• Special version for metal finishing
Safety
• ATEX approval and other international approvals
• Air flow switch
• Over current protection
• Cable breakage protection
Key markets
• Automotive industry
• Tier 1 automotive
• Electric appliances
• Machinery
• Metal furniture
Ord No.
8613 2630 14
8613 2630 15
8613 2630 16
– 30 –
ELECTROSTATIC LOW PRESSURE
TECHNICAL DATA FOR SPRAY GUN ECCO XTATIC LP6000
Max voltage
Liquid pressure
Air pressure
Max air consumption
Air inlet diameter
Normal
Max
Normal
Max
Paint inlet diameter
Connecting cable lenght
Size (WxHxL)
Weight (w/o cable, hose, nozzel)
60 kV
3 bar
6 bar
0,5 to 4 bar
6 bar
350 l/min
G 1/4 (PF 1/4)
G 1/4 (PF 1/4)
10 m (standard) - extension up to 30 m
55x219x207 mm
545g
TECHNICAL DATA FOR CONTROL UNIT EXC LP
Voltage control
Transmission voltage
Max current
Input voltage
Size (WxDxH)
Weight
Working enviroment
This control unit is cluded in the complete spray gun.
EXC LP
Stepwise from 20 to 60 kV DC
AC 24 V
80 µA
230 V, 50Hz
330x125x260 mm
Approx. 5 kg
Temp.: 0 to 45°C Humidity: 20 to 85%
TECHNICAL DATA FOR XTATIC AIR CAPS, NOZZLES AND ACESSORIES
Air cap
Air Cap
Nozzle*
Type
NH 60
NH 61
0,8 mm
Nozzle** 1,1 mm
Nozzle** 1,6 mm
* Use with air cap HN61 ** Use with air cap HN60 ***Included in LP6000W, S, M
Ord. No
6004 0330 44***
6004 0330 43
6004 0330 50
6004 0330 51***
6004 0330 52
Extension cable (Zone 1)
Gun cover
Metallic kit set
Paint hose
Air hose
***Included in the complete spray gun
Ord. No
6004 0330 31
6004 0335 15
6004 0330 37
6003 7365 10
6003 7355 10
Remarks
10 m (max. ext. 30 m)
10 pcs / set
For conversion from solid to metallic paint usage.
10 m
10 m***
– 31 –
ELECTROSTATIC HIGH PRESSURE
ECCO XTATIC 6000 HIGH PRESSURE
ECCO Xtatic HP6000 – is the lightest and most compact air assisted airless electrostatic gun. Xtatic HP6000 offers you unmatched high transfer efficiency and is very environment friendly. The high transfer efficiency provides reduced paint consumption, high class finishing, minimizes over spray inside the paint booth, and thus reduces the operation costs. The guns gives maximum operator comfort, by reduced weight, size and trigger pull, and combined with the high transfer efficiency it reduces the paint work cycle and improves production efficiency. With Xtatic HP6000 you can apply a large variation of paints, including high solids, which can require up to 210 bar atomizing pressure. Xtatic HP6000 is ATEX approved for operation in all safety.
Complete gun including control unit, air cap, nozzle, air hose and cable (No paint hose included)
ECCO XTATIC HP6000
KEY ADVANTAGES FOR E CCO XTATIC HP6000
Light and compact = Ergonomic
• Only 560 g weight
• Easy to handle due to small size
• Low operator fatigue due to low weight and low triger pull
• Equipped with swivels on air and material hoses
High transfer efficiency = Save cost
• Over 90% transfer efficiency, under given circumstances
• Reduce paint consumption
• Reduce paint work cycle
• Minimizing overspray thus reduce maintenance costs
High quality finish
• Air cap atomizing at 20 to 60 bar gives top finish
• Patented feature allows to switch on and off the electrostatic effect as needed
Application of high viscosity materials
• New air cap design allow atomizing at max. 210 bar
• High viscosity materials like high solid paints are applicable
Safety
• ATEX approval
• Safety switch on trigger
• Over current protection
• Cable breakage protection
Key markets
• Off road equipment
• Trucks
• Trailer
• Agriculture machinery
• Rolling stock
• General Industry
Ord No.
8613 2640 14
– 32 –
ELECTROSTATIC HIGH PRESSURE
TECHNICAL DATA FOR SPRAY GUN ECCO XTATIC HP6000
Max voltage
Liquid pressure
Normal
Max
Normal
Air pressure
Max
Max air consumption
Air inlet diameter
Paint inlet diameter
Connecting cable lenght
Size (WxHxL)
Weight (w/o cable, hose, nozzle)
60 kV
3 to 160 bar
210 bar
2 to 5 bar
6 bar
150 l/min
G 1/4 (PF 1/4)
1/4 NPSM
10 m (standard) - extension up to 30 m
55x219x219 mm
560 g
TECHNICAL DATA FOR CONTROL UNIT EXC HP
Voltage control
Transmission voltage
Max current
Input voltage
Size (WxDxH)
Weight
Working enviroment
*Included in HP6000
EXC HP *
Stepwise from 20 to 60 kV DC
AC 24 V
80 µA
230 V, 50Hz
200x125x260 mm
Approx. 5 kg
Temp.: 0 to 45°C Humidity: 20 to 85%
TECHNICAL DATA FOR XTATIC AIR CAPS, NOZZLES AND ACESSORIES
Orifice
Diameter
1/1000
(in) mm
10 0,25
Discharge rate from nozzle (mL/min)
at 10MPa
390
11
13
0,28
0,32
440
580
*Included in the spray gun Xtatic HP6000
at 6MPa
300
340
440
Pattern width (cm) / Angle (°)
10 ˜ 15
30
°
15 ˜ 20
40
°
20 ˜ 25
50
°
6004 0335 60 6004 0335 56 6004 0335 57
6004 0335 61 6004 0335 53* 6004 0335 58
6004 0335 50 6004 0335 54 6004 0335 59
Extension cable (Zone 1)
Gun cover
Gun filter
Paint hose
Air hose
*Included in the spray gun Xtatic HP6000
Ord. No
6004 0335 31
6004 0335 15
6803 3079 00/10/20
6803 0745 10
6003 7355 10
Remarks
10 m (max. ext. 30 m)
10 pcs / set
#60 */ #80 / #100
10 m
10 m*
– 33 –
– 34 –
ECCO FLUID HANDLING SYSTEMS
Designing a good fluid-handling system requires know-how and the right equipment.
At ECCO we have a selection of equipment for your fluid handling needs:
FEEDING
•
•
•
•
•
Pressure pots for low pressure feeding
Feeding pumps – like diaphragm pumps or piston circulating pumps for low pressure
Complete preassembled feeding units for low pressure
Feeding pumps for high pressure application
Transfer pumps from one tank to another
AGITATING
• Pneumatic driven stirrers
REGULATING
• Pressure regulators for low and high pressure
• Back pressure regulators
HEATING
• Heating of the material for low and high pressure
DOSING
• 2K dosing system
All of our fluid handling equipment is designed for the use of water based and solvent based materials. In the design we have minimized the trapping areas for the paint so as to ensure smallest amounts inside when you flush the equipment and thus reducing the need for cleaning liquids.
Depending on your need we have various solutions and our certified distributors and we will assist you making the right choice for your system.
ECCO PSU-20
READY TO USE PAINT SUPPLY UNIT
The Paint Supply Unit has all it’s functions located on the panel.
This gives a very clear overview of the settings in minimum of time.
All functions are located and prepared for production or cleaning/ flushing settings. No risk of using wrong settings after cleaning of filling the system. Just operate by a switch. All parts have been designed to reduce trapped paint pigments internally, and to reduce paint volume. Even change of paint filter can be done without one drop of paint spilled on external surfaces. systems. This gives an easy installation and makes it easy to keep clean during operation. All parts in the stand and paint systems are made in stainless steel for optimal function. The construction gives a very clean surface around the paint systems, all the hoses and connections are placed in the same height as the pump panel and is protected by this. The whole design gives a very low sound-level and operative cost, often reduced by 50% or more.
One pump for all needs in low pressure systems for paint feeding, local or central. Suitable for all type of primer-, base- clear coat and catalyst. The same type of panel with stand is used for the different
The unit is very user friendly, easy to install and service. The operator has all information clearly displayed and labelled and all service can be done rapidly on the functional parts without any risk of splashing paint or solvent.
Speed control valve for stirrers air motor.
Pressure regulators and gauges for paint pressure, in/out. Alternative for Nitrogen in hardener system.
Relief valve for outgoing paint pressure.
Drainage valve for filter and pump.
Relief valve for return paint pressure.
Shut-off valves for:
•
•
Paint feeding
Return paint feeding
Technical data
Pump in SS
Fliter house and cartridge in SS
Paint pressure regulator in SS
Back pressure regulator in SS
Stand and spillage tray for container (20 lit.)
Air motor with gear box for stirrer
Cover (can be opened 1/3)
Suspension device for cover in stand
Propeller stirrer
Disc stirrer
Shut-off valves for paint in/out
Nitrogen pressure regulator
Nitrogen container (40 lit.)
Adjustable flow valve for circulation
Base / Clear coat system
6004 0163 70
•
•
•
•
•
•
•
•
•
•
Base / Clear coat system
6004 0163 71
•
•
•
•
•
•
•
•
•
•
Solvent system
6004 0163 80
•
•
•
•
•
•
•
•
Catalyst / Nitrogen
6004 0163 90
•
•
•
•
•
•
•
– 35 –
ECCO LOW PRESSURE PUMPS - DIAPHRAGM
ECCO FLOW CT15 / PN15 / ALT25
Lubrication free diaphragm pumps with non freeze and non stalling air system. The pumps have modular design, are easy to maintain and have high air efficiency. The CT15 is a conductive plastic pump with diaphragms in PTFE, suitable for many pumpable fluids in temperature range 0-66 C°. The PN15 is a polypropylene pump with PTFE diaphragms, same temperature range as CT15. The polypropylene pump can handle many of the fluids which the CT15 cannot. The ALT25 is a pump in aluminum with PTFE diaphragms, valve seat in Nylon and ball in PTFE. Other material available as option, and can handle fluid temperature up to 93 C°.
Pressure Ratio
Capacity l/min
Inlet Air Pressure bar min/max
Air consumption at 8 bar, l/min
Self-Priming
Dry lift capacity at 6.8 bar
Max pumpable particle size mm
Air inlet
Liquid inlet
Liquid outlet
Adjustable liquid connections
Weight, kg
Housing material
Diaphragm material, wet site/dry site
Sealing rings
ECCO FLOW CT15
8621 0312 09
1:1
0-64
1,3 - 8,2
0-approx.565
Yes
3,2
3,2 mm
G 1/4 ext.
G 1/2” int.
G 1/2” int.
yes
5,4
Nylon
PTFE/Santopren
PTFE
ECCO FLOW PN15
8621 0310 01
1:1
0-64
1,3 - 8,2
0-approx.565
Yes
4,5
3,2 mm
G 1/4 ext.
G 1/2” int.
G 1/2” int.
yes
4,1
PP
PTFE/Geolast
Nitril
ECCO FLOW ALT25
8621 0312 10
1:1
0-156
1,3 - 8,2
0-approx.1100
Yes
3,2
6,2 mm
G 1/4 ext.
G 1” int.
G 1” int.
yes
10,5
Aluminum
PTFE/Santopren
PTFE
ECCO FLOW AL15 / SS15
Metallic diaphragm pumps with small dimensions, but high performance. All components in direct contact with the fluid, such as valves, diaphragms, covers and manifolds, have been manufactured using materials which are highly resistant to physical and chemical wear, thus allowing you to handle the most of the existing liquids.
Pressure Ratio
Capacity l/min
Inlet Air Pressure bar min/max bar
Air consumption at 8 bar, l/min
Self-Priming
Dry lift capacity at 6.8 bar
Max pumpable particle size mm
Air inlet
Liquid inlet
Liquid outlet
Adjustable liquid connections
Weight, kg
Housing material
Diaphragm material
Sealing rings
Valve seat/ball
ECCO FLOW AL15
8621 0520 01
1:1
0-52
1-8
0-approx.375
Yes
4,9
2,0 mm
G 1/4 ext.
G 1/2 int.
G 1/2 int.
yes
3,8
Aluminum
PTFE
PTFE
SS/SS
ECCO FLOW SS15
8621 0510 01
1:1
0-52
1-8
0-approx.375
Yes
4,9
2,0 mm
G 1/4 ext.
G 1/2 int.
G 1/2 int.
yes
6,1
Stainless Steel (SS)
PTFE
PTFE
SS/SS
– 36 –
CIRCULATING PUMP - PISTON
•
•
•
•
•
•
•
•
•
•
•
ECCO TRANS FLOW 32S / 64S
This compact pump can ensure feeding of multiple spray guns in small circulating systems without pulsation. The pump induces very little shear on paints and thus is very suited for water based materials. 2:1 ratio gives more power to overcome pressure drops in circulating systems. High output rate at low operating frequency reduces wear and maintenance.
•
•
Air motor: Quick change over pneumatic mechanism, Sensing valves, Control block and slider
Fluid section in Stainless steel, both piston rod, cylinder and 4 balls.
Hard coating piston and cylinder gives long lifetime
4 ball pump
Compact and easy assembly
Little and easy maintenance
Long life small throat seal stuffing, fast & easily replaceable
High output at low frequency, giving little shear forces on paint
Pneumatic change over mechanism ensuring steady flow rate
Low wear = Low maintenance costs
Compact design: Ideal for small circulating systems
Especially suitable for sensative paints
Compact design, easy to install in cramped spaces
T
echnical data Ecco TransFlow 32S
Transfer ratio: 2:1
Output per cycle:
Air motor piston diam:
Stroke length:
Output at 25 cycles/min
Air inlet pressure max::
Outlet pressure max
240 cc
80 mm
70 mm
6 litres
6 bar
12 bar
Air consumption max: 106 lit/min
Inlet / Outlet connection
Air inlet connection
G 3/4, G 3/8
1/2”
Ecco Trans Flow 64S
4:1
240 cc
110 mm
70 mm
6 litres
6 bar
24 bar
200 lit/min
G 3/4, G 3/8
1/2”
Type
ECCO TRANS FLOW 32S
ECCO TRANS FLOW 64S
Dimensions in mm /inch
Length
Width without air preparation unit
Width incl. air preparation unit
Depth
CIRCULATING FILTER ECCO BFS-101
Reliable high quality stainless steel filter housing with filter bag system. The filter ECCO
BSF-101, delivered with one 100 micrometer NMO (Nylon Monofilamnent) filter bag, is a perfect fit for medium size circulating, such as aitomotive Tier1 or consumer electronic painting lines. A range of filters with suitable mesh sizes for this use are avaliable.
Ord. No.
8621 0810 00
8621 0811 00
TransFlow 32S
484 / 19”
210 / 8 1/4”
430 / 17”
160 / 6 1/4”
TransFlow 64S
510 / 20”
210 / 8 1/4”
430 / 17”
215 / 8,5”
Technical data Circulating filter ECCO BFS-101
Inlet connection thread:
Outlet connection thread
Max operating pressure
Max Flow capacity:
Volume
Weight
Filter area
BSP 1”
BSP 1”
16 bar
6 m3 / h
3 litres
8 kg
0,09 m2
Paint filter for ECCO low pressure pumps
ECCO BFS-101
Filter bags for BFS-101
ECCO BFS-101
Ord. No.
8613 2260 30
Ord. No.
6802 972x yz
the xyz specifies the mesh in microns
– 37 –
ECCO LOW PRESSURE PUMPS - PISTON
COMPACT PISTON PUMPS FOR TRANSFERRING FLUIDS
WIDE RANGE OF APPLICATIONS
ECCO Flow M2P are small, handy pumps designed for transferring fluids. The applications are for all fluids that needs to be transferred. Suitable for all industries.
SMALL SIZE AND HIGH VERSATILITY
A M2P pump has low weight and small dimensions which makes it easy to handle and easy to install. The wide range of accessories makes it easy to alternate between different jobs.
DESIGNED FOR SAFETY
ECCO Flow M2P can be driven against closed valve to a standstill without damage. This feature can also be utilized as a remote control as it makes the pump stop and start without manual attention when the valve is opened or closed.
Material - ECCO M2P 18B/20B
Piston rod
Piston rod packing
Piston packing
Cylinder
Pump hosing
M2P 18B
Hard-chromed plated stainless steel
Teflon
Glas-fibre reinforced teflon
Nitride hardened stainless steel
Glass-fibre reinforced polyamide
M2P 20B
Brass
Teflon
Glas-fibre reinforced teflon
Brass
Glas-fibre reinforced polyamide
Technical data:
Pressure ratio:
Max fluid pressure:
Capacity
- water
- 35 sec viscosity
Fluid intake:
Fluid outlet:
Max working pressure for air:
Air consumption at air pressure 6 bar
Air connection
- M2P 18B
- M2P 20B
Sound level
1:2
3.7 bar
40 l/min
25 l/min
G 1 int.
G 1/2 int.
7.5 bar
0 - approx. 200 l/min
G 1/4 ext.
Quick coupling/air hose 3/8” int.
60 dB(A)
ECCO FLOW M2P 18B
ECCO Flow M2P 18B can handle all materials which can be pumped with M2P 20B and abrasive materials. Suitable for paints and solvents. To manage the strains the piston rod is manufactured from hard-chromed plated stainless steel and the cylinder from nitride hardened stainless steel. The pump is equipped with non-return valve.
ECCO FLOW M2P 20B
ECCO Flow M2P 20B is suitable for non-abrasive materials like alcohol, butanol, cleaning fluid and soap solution, petrol and diesel oil, ethanol, ether, glycerine, glycol, methanol, mineral-, synthetic and vegetable oil, paraffi and water. Pumping of food is not recommended. It is equipped with a valve for air and quick-coupling.
ECCO Flow M2P 18B
Ord. No.
8621 0111 57
ECCO Flow M2P 20B
ECCO FLOW M2P TRANSFER PACK
Ecco Flow M2P Transfer Pack is a complete package consisting of pump M2P 18B or M2P 20B, a suction tube for a 200 litre standard barrel, air valve, 5m air hose, 3m outlet hose. Eathing device and throttle valve are accessories. Transfer Pack M2P 18B is mainly intended for pumping of abrasive materials, paints and solvents.
Type
ECCO TRANSFER PACK M2P 18B
ECCO TRANSFER PACK M2P 20B
Ord. No.
8621 0110 54
8621 0110 58
– 38 –
Ord. No.
8621 0110 09
ECCO PRESSURE FEED TANKS
CLOSED AND SAFE HANDLING
The ECCO pressure feed tanks are suitable for all sprayable material and provide safe storage. Having almost no wearing parts they are first choice for paints with abrasive pigments. To prevent the build up static charge all of the tanks have an earthing device.
COMPLETE, READY FOR START UP
The tanks are made of galvanized steel and as standard equipped with regulator, pressure gauge, safety relief valve, re-filling port and ball valves for air and paint. All you have to do is fill with paint and connect to your air supply and spray gun. Volume 9 - 90 litres.
PNEUMATIC STIRRER
For continous stirring ECCO pressure feed tanks with a manual stirrer can easily be equipped with an oilfree air motor.
TOP OR BOTTOM FEED
For more viscous materials ECCO pressure feed tanks with bottom outlet should be used.
PRESSURE FEED TANK
Air connection: G 1/4 male. Paint connection: G 3/8 male.
AIR MOTOR FOR STIRRER
Explosion proof air powered motor for ECCO tanks with stirrers. Including bracket, quick coupling for air hose, speed control valve and silencer. Air consumption at 100 - 150 rpm: 150 - 200 l/min.
10 lit tank
45 lit tank
TOP FEED
Type
P10R(S)-2.4
P12R-6
P12RA-6*
P24R-6*
P45R-4*
P45R-6*
Volume litre
9
12
12
24
45
45
P90R-6* 90
* With manual stirrer.
Air pressure max., bar
2.4
6
6
6
4
6
6
Height mm
520
545
Inner
Ø mm
210
245
Width mm
695
945
885
885
245
245
360
360
470
470
1165 360/440 470
330
350
350
350
Weight kg
8
25
27
32
46
46
63
Ord. No.
8622 0216 09
8622 0116 12
8622 0116 13
8622 0116 24
8622 0116 45
8622 0116 46
8622 0116 90
BOTTOM FEED
Type
P24RP-6
Volume litre
24
Air pressure max., bar
6
Height mm
795
Inner
Ø mm
245
Width mm
525
Weight kg
30
Ord. No.
8622 0116 25
P45RP-4 45 4 735 360 645 44
8622 0116 47
P45RP-6 45 6 735 360 645 44
8622 0116 48
For stainless steel versions, please contact your nearest retailer of ECCO Products.
ELM 33 P
OVERFLOW PROTECTOR
Facilitates the filling of ECCO Pressure Feed Tank 12 - 500 litres.
Ord. No.
8610 0110 60
StopFlow
Ord. No.
6003 9157 00
– 39 –
PAINT SUPPLY
PAINT PRESSURE REGULATORS
Paint pressure regulator with pneumatic or spring controlled regulation of the paint pressure. This new generation of paint pressure regulators will give you high accuracy on the paint pressure and will reduce the pulsations in your system to a minimum. All parts in contact with paint are in stainless steel which makes it suitable for waterborne paint.
COLOUR CHANGING SYSTEMS
ECCO LP CCM is a pneumatically operated colour change system. The system is modular and can be built according to customer needs. All material in contact with liquid are produced in high grade stainless steel. Sealings and o-ring are from UHMW and Perflour
128 to withstand all known paints and solvents. ECCO LP CCM can be equipped with a free number of colour changing valves (CCV). The modules are prepared for circulation.
The use of specially designed fittings obtain a dead end free connection all the way from the plastic hose to the valve. This will give trouble free operation and optimum conditions for the circulated materials.
ECCO Flow Col 06 AP
(Air controlled pressure)
ECCO Flow Col 06 SP
(Spring controlled pressure)
Technical data
Max paint pressure
Recommended paint pressure
Max paint flow
Recommended pilot air pressure
Max air pressure, for flushing/purging
Max solvent pressure, for flushing/purging
Max operating frequency
20 bar
2-6 bar
Depends on viscosity, system pressure, etc.
5-9 bar
20 bar
20 bar
60 cycles/minute intermittent
ECCO Flow Col 10A-SS
(pneumatic control)
ECCO Flow Col 10S
(Spring controlled pressure)
Type
ECCO LP CCM
Ord. No.
8611 4710 00-90
Technical data
Max primary pressure
Max secondary pressure
Min secondary pressure
Max paint flow
10 bar
8 bar
0,5 bar
Depends on viscosity, system pressure, hose size etc.
Type
ECCO Flow Col 06 AP
ECCO Flow Col 06 SP (without manometer)
Ecco Flow Col 06 SP (including manometer)
Wall bracket for Ecco Flow Col 06
Ecco Flow Col 10A-SS
Ecco Flow Col 10S - SS
Ecco Flow Col 10BA - SS
Ecco Fow Col 15 BS-SS
PUMP PANEL PSU AL 15
Ord. No.
8623 0136 46
8623 0136 47
8623 0136 50
6004 0225 15
8623 0130 46
8623 0130 47
8623 0132 47
8623 0132 46
PAINT HEATER H3000
The paint heater Ecco H3000 is a high performance heater for most types of fluids. The heater work at a pressure up to 400 bars, has a comopact and robust design and is easy to maintenance. ATEX pending in 2012.
TECHNICAL DATA
Length
Width
Pump unit for taylor made Spray Pack, including pump Ecco Flow AL 15, bracket, pressure gauge and regulators. Fits all Ecco low pressure spray guns and hoses. Technical data about the pump ECCO Flow AL15 , see page 36.
Depth
Max inlet pressure
Power
Power supply
Temperature range
Flame proof as per
Weather proof as per
Fluid inlet
Fluid outlet
630 mm / 25 inch
280 mm / 11 inch
140 mm / 5,5 inch
400 bar
3000 W
220 V AC- 50 Hz
100 degrees C
IS 2148
IP 55
3/8” BSP
3/8” BSP
Type
ECCO PSU AL 15
Ord. No.
8613 2311 65
Type
ECCO PAINT HEATER H3000
Ord. No.
8613 6114 60
– 40 –
PROPELLER STIRRERS FOR OPEN PAILS
Stirrers with edge bracket for open standard pails of 12, 20 or 200 litre. The Ecco ELM stirrers have a shaft and a propeller of stainless steel. The complete stirrer includes a lubrication-free air motor, silencer, speed control valve and a quick coupling for 3/8” air hose.
STIRRERS
PROPELLER STIRRERS FOR PUMP UNITS
Stirrer for 20 litle pails in ECCO pump units or Spray
Packs. Complete with lubrication-free air motor, silencer, speed control valve, mounting device and air hoses. Suitable for Spray Packs 315L,
115L, 615L, 117L, 317L, 617L and for pumps Ecco
Feed 115L-615L and Ecco Feed A2 SS .
Ecco ELM 33F-GS1
Type
ECCO ELM 33F-GS12 for 12 litre pails
ECCO ELM 33F-GS1 for 20 litre pails
Ecco ELM 33F-GS2 for 200 litle pails
- Quick coupling for ELM 33FS
Ecco ELM type:
Length of shaft incl. propeller
Propeller diameter:
Weight complete:
33F-GS12
210 mm
80 mm
2,4 kg
33FGS1
320 mm
80mm
2,4 kg
Ord. No.
8610 0110 68
8610 0110 65
8610 0110 66
8610 0110 73
33F-GS2
860 mm
160 mm
4,6 kg
Type
ECCO ELM 33F-S
Length, shaft with propeller
Propeller diameter
Weight complete
Ord. No.
8610 0110 63
335 mm
80 mm
1,8 kg
HELIX SCREW STIRRERS FOR OPEN PAILS
This stirrer has a unique helix-shaped stirrer blade to screw down through the 2” hole of a 200 litre drum. The stirrer is then fastened by its threading. The ECCO Helix has shaft and propeller in stainless steel for abrasive fluids.
It is highly effective and can also be used in other containers with the same depth. Both silencer, speed control valve and quick coupling is included. The stirrer can also be mounted on an open 200 litre container using the extra edge bracket.
STIRRER MOTOR FOR PRESSURE FEED TANKS
Lubrication-free motor with silecer, speed control valve, quick coupling for 3/8” air hose and mounting adapter for ECCO POT pressure feed tanks with a manual stirrer. Weight: 2,4 kg. For pressure feed tank B.D.M. there is an adapter as necessary.
Type
ECCO Helix LS in stainless steel
Additional edge bracket for mounting on open drums
Length, shaft with propeller
Propeller diameter
Weight complete
Ord. No.
8610 0112 71
6003 6663 00
850 mm
80 mm
8,2 kg
Type
ECCO ELM 33P
Adapter for pressure feed tank B.D.M.
Ord. No.
8610 0110 60
6003 3902 80
– 41 –
HIGH PRESSURE PUMPS - ECCO POWER FLOW
ECCO Power Flow pump series are the perfect choice for a large variety of industries such as general industry, wood, protective coatings, marine/offshore and more. The pump series range is suitable for liquids from low to very high viscosities, primers, finish paints and paints containing varied particle size. The high paint pressure required for airless paint is generated by strong, double acting air operated pumps. The new designed pump has a high performance air motor that ensures a faster change over, which makes the pulsation disappear and the lacquer processing more stable, versus a conventional mechanical change over which has a high pulsation. The pumps are produced to reach the highest standard of quality and life time and they are available in a range of fluid and pressures ratios: 14:1, 28:1, 40:1 and 75:1.
ADVANTAGES
• Unique new design air motor
• Quick pneumatic changeover mechanism, giving no pulsation and ensures a perfect finish
• Change over mechanism ensures no stalling
• Ice free air motor
• All wetted parts are in stainless steel, thus usable with water borne and solvent borne materials
• Easy maintenance due to few parts and simple construction
APPLICATION MATERIALS
• Solvent- or water borne coatings
• Primers and catalysed laquers
• Enamels and polyurethane’s
• UV-paint
PUMPS:
ECCO POWER FLOW 214S
ECCO POWER FLOW 214S-B-AA
8621 0714 00
ECCO POWER FLOW 214S-TP-AA
8621 0714 10
ECCO POWER FLOW 214S-T-AA
8621 0714 15
8621 0714 20
ECCO POWER FLOW 328S
8621 0715 00
ECCO POWER FLOW 328S-TP-A
8621 0715 05
ECCO POWER FLOW 328S-T-A
8613 2346 29
ECCO POWER FLOW 328S-B-A
8621 0715 46
ECCO POWER FLOW 328S-TP-AA
8621 0715 10
ECCO POWER FLOW 328S-T-AA
ECCO POWER FLOW 328S-B-AA
ECCO POWER FLOW 640S
ECCO POWER FLOW 640S-T-A
8613 2346 26
8613 2346 25
8621 0723 00
8613 2346 59
ECCO POWER FLOW 640S-B-A
ECCO POWER FLOW 1275S
ECCO POWER FLOW 1275S-T-A
ECCO POWER FLOW 1275S-B-A
8621 0723 46
8621 0726 00
8621 0726 15
8621 0726 20
SELECTION GUIDE FOR POWER FLOW PUMPS
Applications
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Wood
X
X
X
X
X
X
X
X
X
X
X
X
X
General
Industry
X
X
X
X
X
X
X
Corrosion
Protection
X
X
X
X
X
X
Solvent & water borne coating
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Materials
Wood-stains, lacquers
& varnishes
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Primers, sealers & catalysed lacquers
X
X
X
X
X
X
X
X
X
X
X
X
X
– 42 –
ECCO POWER FLOW 214S-AA / 328S A / 328S AA
ECCO Power Flow 214S / 328S A/AA is particularly suitable for craftsmen as an additional unit and industrial painting jobs. The ECCO Power Flow 214S & 328S A / AA qualifies for the machine building, wood, furniture, steel and vehicle industries. It is suitable for anyone who uses a variety of painting materials.
The pump also qualifies for manual and automated installations feeding one or more spray guns. These ECCO Power Flow pumps can be delivered bare, on a tripod, on a trolley or on a wall bracket. It can easily be adjusted into an Air Assist model (AA).
PF 214S - TP-AA PF 214S - T-A PF 328S-TP/T-A
PF 328S - T-AA
Ord No.
Type
Pressure ratio
Max. spray volyme (cc/min)
Capacity (cc/double stroke)
Paint connection suction/pressure
Max air inlet pressure Bar (Psi)
Max. air consumption (N ltr/min)
Air inlet connection
Air outlet connection
Max output pressure Bar (Psi)
Weight (Kg)
TECHNICAL DATA ECCO POWER FLOW 214S AA
ECCO POWER FLOW
214S AA
8621 0714 00
BARE
14:1
1200
40
3/4” AND 1/4”-18
6 (57)
250
NOT INCLUDED
NOT INCLUDED
84 (1218)
15
ECCO POWER FLOW
214S-TP-AA
8621 0714 10
TRIPOD
14:1
1200
40
3/4” AND 1/4”-18
6 (57)
250
FEMALE 1/4” OR 1/2”
G1/4”
84 (1218)
18
ECCO POWER FLOW
214S-T-AA
8621 0714 15
TROLLEY
14:1
1200
40
3/4” AND 1/4”-18
6 (57)
250
FEMALE 1/4” OR 1/2”
G1/4”
84 (1218)
25
ECCO POWER FLOW
214S-B-AA
8621 0714 20
BRACKET
14:1
1200
40
3/4” AND 1/4”-18
6 (57)
250
FEMALE 1/4” OR 1/2”
G1/4”
84 (1218)
18
Ord. No.
Type
Pressure ratio
Max. spray volyme (cc/min)
Capacity (cc/double stroke)
Paint connection suction/pressure
Max air inlet pressure Bar (Psi)
Max. air consumption (N ltr/min)
Air inlet connection
Air outlet connection
Max output pressure Bar (Psi)
Weight (Kg)
TECHNICAL DATA ECCO POWER FLOW 328S A / 328S AA
ECCO
POWER FLOW
328S A
ECCO
POWER FLOW
328S-TP-A
ECCO
POWER FLOW
328S-T-A
ECCO
POWER FLOW
328S-B-A
ECCO
POWER FLOW
328S-TP-AA
ECCO
POWER FLOW
328S-T-AA
8621 0715 00
BARE
28:1
1500
40
3/4” AND 1/4”-18
8 (116)
400
NOT INCLUDED
NOT INCLUDED
224 (3250)
16
8621 0715 05
TRIPOD
28:1
1500
40
3/4” AND 1/4”-18
8 (116)
400
FEMALE
1/4” or 1/2”
NO USE
224 (3250)
19
8613 2346 29
TROLLEY
28:1
1500
40
3/4” AND 1/4”-18
8 (116)
400
FEMALE
1/4” or 1/2”
NO USE
224 (3250)
18
8621 0715 46
BRACKET
28:1
1500
40
3/4” AND 1/4”-18
8 (116)
400
FEMALE
1/4” or 1/2”
NO USE
224 (3250)
18
8621 0715 10
TRIPOD
28:1
1500
40
3/4” AND 1/4”-18
8 (116)
400
FEMALE
1/4” or 1/2”
G1/4”
224 (3250)
20
8613 2346 26
TROLLEY
28:1
1500
40
3/4” AND 1/4”-18
8 (116)
400
FEMALE
1/4” or 1/2”
G1/4”
224 (3250)
26
ECCO
POWER FLOW
328S-B-AA
8613 2346 25
BRACKET
28:1
1500
40
3/4” AND 1/4”-18
8 (116)
400
FEMALE
1/4” or 1/2”
G1/4”
224 (3250)
19
– 43 –
ECCO POWER FLOW 640S A / 1275 S
The pump ECCO Power Flow 640S A is suitable for medium and high viscosity materials. This pump has been designed for high performance purposes and feeds large type nozzles or several spray guns at a time. Suitable for protective coatings, wood and car manufacturers. A single spraying operation produces high coating thickness and high performance characteristics. The use of solvents is cut to a minimum, because highly viscous materials can be applied directly. There is hardly any overspray or spray mist with the environment remaining clean. Our equipment stands for superb performance quality and meets all technical requirements. Their advanced design and conception correspond to all applicable safety specifications and regulations. Sophisticated engineering, functional dependability and easy handling are only few of the outstanding features of these equipments. The pump can be delivered bare, on a trolley for easy mobility painting big parts or on a wall bracket.
The air powered airless model ECCO Power Flow 1275S A is designed to withstand the toughest working conditions as can be found at shipyards, steel construction plants, freight car manufacturing plants or bridge building sites. ECCO Power Flow 1275S A pumps come in various versions: hydraulic pressures up to 450 bar corresponds to relative transfer volume up to 210 cc /cycle so that even with several spray guns and long material hoses considerably high spray pressures can be obtained. ECCO Power Flow 1275S A pumps are in stainless steel 410. The pumps are also available as stationary units for wall mounting.
Ord. No.
Type
Pressure ratio
Max. spray volyme (cc/min)
Capacity (cc/double stroke)
Paint connection suction/pressure
Max air inlet pressure Bar (Psi)
Volume/Cycle (Ml)
Max. air consumption (N ltr/min)
Air inlet connection
Air outlet connection
Max output pressure Bar (Psi)
Weight (Kg)
ECCO Power Flow 640S - T-A
TECHNICAL DATA ECCO POWER FLOW 640S -A
ECCO POWER FLOW
640S A
8621 0723 00
BARE
40:1
5500
110
1” and 1/4”-18
8 (116)
110
1900
NOT INCLUDED
NOT INCLUDED
320 (4641)
23
ECCO POWER FLOW
640S-T-A
8613 2346 59
TROLLEY
40:1
5500
110
1” and 1/4”-18
8 (116)
110
1900
FEMALE 1/4” or 1/2”
NO USE
320 (4641)
32
ECCO POWER FLOW
640S-B-A
8621 0723 46
BRACKET
40:1
5500
110
1” and 1/4”-18
8 (116)
110
1900
FEMALE 1/4” or 1/2”
NO USE
320 (4641)
24
TECHNICAL DATA ECCO POWER FLOW 1275S-A
Ord.No.
Type
Pressure ratio
Max. spray volyme (cc/min)
Capacity (cc/double stroke)
Paint connection suction/pressure
Max air inlet pressure Bar (Psi)
Volume/Cycle (Ml)
Max. air consumption (N ltr/min)
Air inlet connection
Air outlet connection
Max output pressure Bar (Psi)
Weight (Kg)
ECCO POWER FLOW
1275S
8621 0726 00
BARE
75:1
5500
210
1” AND 1/4”-18
6 (57)
210
2600
NOT INCLUDED
NOT INCLUDED
450 (6527)
73
ECCO POWER FLOW
1275S-T-A
8621 0726 15
TROLLEY
75:1
5500
210
1” AND 1/4”-18
6 (57)
210
2600
1” CLAW COUPLING
NO USE
450 (6527)
98
ECCO Power Flow 1275S-A
– 44 –
POWERCOL HIGH PRESSURE REGULATOR
Fluid pressure regulators are used to reduce main line pressure, remove pulsations and maintain the desired fluid pressure to the spray guns.
ECCO PowerCol has a compact design and high regulation accuracy.It introduces very little shear of the paint, is very reliable and requires little maintenance.
All wetted parts are in stainless steel.
PowerCol 20S high pressure regulator in SS
Power Col 20S high pressure regulator in SS with manometer
TECHNICAL DATA:
Max inlet pressure
Regulated pressure
Maximum flow rate
Fluid inlet
Fluid outlet
Gauge port inlet
Length
Diameter
Ord. No.
8623 0141 20
8623 0141 30
345 bar
30-290 bar
6 lit/min
3/8” BSP
3/8 BSP
1/4” BSP
300 mm / 12 inch
160 mm / 6 1/3
ACCESSORIES FOR HIGH PRESSURE PUMPS
SERVICE KITS
A service kit includes important wear parts for each pump. It also includes gaskets normally damaged when disassembling the pump. Installation instructions in the form of exploded drawings are provided.
’
OPTIONAL HOSE
Return flow pipe, for connection to the ball valve of the high pressure filter. Render possibility to circulate flushing solvent through the suction pipe into the pump, high pressure filter and back to the solvent container. Delivered with pipe and connectors made in stainless steel connected with 1/2“- hose.
Fits the ECCO Power Flow 214S, -328S, -640S and
-1275S.
SERVICE KIT ECCO POWER FLOW AIR MOTOR 214S
SERVICE KIT ECCO POWER FLOW AIR MOTOR 328S
SERVICE KIT ECCO POWER FLOW 214S/328S PTFE
SERVICE KIT ECCO POWER FLOW 214S/328S UHMW
SERVICE KIT ECCO POWER FLOW 214S/328S PTFE+LEATHER
SERVICE KIT ECCO POWER FLOW 214S/328S UHMW+PU
SERVICE KIT ECCO POWER FLOW AIR MOTOR 640S
SERVICE KIT ECCO POWER FLOW 640S PTFE
SERVICE KIT ECCO POWER FLOW 640S UHMW
SERVICE KIT ECCO POWER FLOW 640S PTFE+LEATHER
SERVICE KIT ECCO POWER FLOW 640S UHMW+PU
SERVICE KIT ECCO POWER FLOW AIR MOTOR 1275S
SERVICE KIT ECCO POWER FLOW 1275S PTFE
SERVICE KIT ECCO POWER FLOW 1275S PTFE+LEATHER
SERVICE KIT ECCO POWER FLOW CONTROL BLOCK
SERVICE KIT ECCO POWER FLOW CONTROL BLOCK 1275S
POWERCOL HIGH PRESSURE REGULATOR
Fluid pressure regulators are used to reduce main line pressure, remove pulsations and maintain the desired fluid pressure to the spray guns.
ECCO PowerCol has a compact design and high regulation accuracy.It introduces very little shear of the paint, is very reliable and requires little maintenance.
All wetted parts are in stainless steel.
6004 0264 90
6004 0265 90
6004 0265 91
6004 0265 92
6004 0265 93
6004 0265 94
6004 0266 90
6004 0266 91
6004 0266 92
6004 0266 93
6004 0266 94
6004 0268 90
6004 0268 91
6004 0268 93
6004 0265 95
6004 0268 95
PowerCol 20S high pressure regulator in SS
Power Col 20S high pressure regulator in SS with manometer
TECHNICAL DATA:
Max inlet pressure
Regulated pressure
Maximum flow rate
Fluid inlet
Fluid outlet
Gauge port inlet
Length
Diameter
RETURN FLOW PIPE
HIGH PRESSURE FILTER
FILTER INSERT 60 MESH (STANDARD)
FILTER INSERT 100 MESH
FILTER INSERT 200 MESH
FILTER INSERT 60 MESH (STANDARD)
FILTER INSERT 100 MESH
FILTER INSERT 200 MESH
For pump
214S/328S
214S/328S
214S/328S
640S/1275S
640S/1275S
640S/1275S
Size
0,250 mm
0,150 mm
0,075 mm
0,250 mm
0,150 mm
0,075 mm
Ord. No
6004 0265 66
6004 0265 67
6004 0265 68
6803 5858 00
6803 5867 00
6803 5868 00
PAINT HEATER H3000
The paint heater Ecco H3000 is a high performance heater for most types of fluids. The heater work at a pressure up to 400 bars, has a comopact and robust design and is easy to maintenance. ATEX pending in 2012.
Ord. No.
8623 0141 20
8623 0141 30
345 bar
30-290 bar
6 lit/min
3/8” BSP
3/8 BSP
1/4” BSP
300 mm / 12 inch
160 mm / 6 1/3
TECHNICAL DATA
Length
Width
Depth
Max inlet pressure
Power
Power supply
Temperature range
Flame proof as per
Weather proof as per
Fluid inlet
Fluid outlet
Type
ECCO PAINT HEATER H3000
630 mm / 25 inch
280 mm / 11 inch
140 mm / 5,5 inch
400 bar
3000 W
220 V AC- 50 Hz
100 degrees C
IS 2148
IP 55
3/8” BSP
3/8” BSP
6004 0264 09
Filter insert in stainless steel, each available in three different sizes.
For use in high pressure filter of the ECCO Power Flow 214S, -328S, -640S and -1275S.
Ord. No.
8613 6114 60
– 45 –
2K FLUID HANDLING
ECCO DYNAMIC FLOW - 2K DOSING AND MIXING UNIT
The Dynamic Flow distinguishes itself through a high precision TwinJet injection technology. The measurement of the flows is done by Coriolis mass flow meters. These mass flow meters are maintenance free, since there are no moving parts in the material flow, measurement is done through resonance. In the same time temperature and material mass is measured. The control of the unit is done by a well proven Siemens S7 controller. Thus Dynamic Flow is an absolutely reliable unit fitted for the dosing and mixing of almost all 2K materials.
Advantages
•
Siemens S7 controller
• 4” Touch Screen – menu driven
• User friendly text and pictograms
• Twin Jet‘ process – Adjustments and dosing is done on both
colour and hardener
• Management of up to 10 colours, hardener, and cleaning
agent
• EX-proven remote control box as standard
• Usable for all pressure levels and applications (three different
versions)
• Dosage control with error messages in text and suggestions
for solutions
• Highest mixing precision < 1%
• For manual and automatic operation
Ord. No.
Type
2K Low Pressure Dynamic Flow
(standard model for 1 colour, 1 hardener, 2 flushing)
2K High Pressure Dynamic Flow
(standard model for1 colour, 1 hardener, 2 flushing)
8614 0201 12
8614 0301 12
TECHNICAL DATA
10 Valves
Recipies
Flushing programs
Flow rate
Flow range
Mixing precision
Mixing ratio
Current supply
Control cabinet WxHxD
Mixing module WxHxD
Compressed air supply
10
11 up to 6 l/min.
0 - 160 bar
+/- 0,5%
0,5 - 50 : 1
230 V AC
600 x 700x 300mm
600 x 700x 300mm
6 bar (vol depending on application)
ECCO Dynamic Flow Standard version:
1. Control cabinet for wall mounting
2. Mixing module for wall mounting with 4 valves
3. Remote control panel – functions: spray, purge, fill, stop
4. Ex-cable between control and mixing modules 5 m long
Optional
• Additional valves – low & high pressure
• Larger 6“ Touch Screen
• EX remote control with recipe selection
• Ex-cable between controller and mixing module 10 or 25m.
• Extra high pressure – up to 210 bar
• Gun flush box
• Steel frame for control cabinet and mixing module
– 46 –
PERSONAL SAFETY
FRESH AIR HOOD JUNIOR
Junior is recommended for spray painting. The hood will protect the wearer against dust and fumes. The large window which can be raised is covered by protective foil. The Fresh air hood Junior includes innerhood, protecting foil
(10 pcs.), air hose and belt with throttle valve with nipple for connection to air hose Ø 6.3 mm (1/4”) female. Air consumption: 150 - 200 l/min.
AIR FILTER
Air filter for breathing air, can be connected directly to the air supply. The filter will remove particles larger than 0.01 µ, oil fumes and odours. The filter will not remove methane, carbon monoxide or other toxic gases.
Fresh air hood Junior
Innerhood, set of 10 pcs.
Protecting foil, set of 100 pcs
Ord. No.
8615 0133 35
6803 6678 00
6803 6679 00
Technical data
Working pressure
Normal working pressure to safety helmet
Air capacity
Air connections
Weight
AIR THERMOSTAT VORTEX
For air conditioning of fresh air helmets and hoods. The temperature of the breathing air (warm/cold) is adjustable. An air thermostat Vortex includes hose nipple
Ø 1/4” female. To be installed between air filter and helmet.
Air filter AFR 6
Bracket for wall-mounting
Ceramic filter, AFR13 before 2007-10
Ceramic filter, AFR13 after 2007-10
Ceramic filter, AFR6
Chemical filter, AFR13 before 2007-10
Chemical filter, AFR13 after 2007-10
Chemical filter, AFR6
Air thermostat Vortex
Ord. No.
8615 0133 70
HOSE FOR BREATHING AIR
Air hose made of wear resistant PVC. Delivered per metre. Outer diam. 11 mm.
Air hose, inner diam. 1/4”
Coupling G 1/4 with cap nut and hose clamp
Quick coupling QIC 10A H06
Nipple NIP 10A H06
Hose clamp
Ord. No.
6003 9598 00
6001 1235 00
8202 1302 02
8202 1202 11
0347 0122 07
max. 6 bar
3 bar
360 l/min
G 1/4 female
2.5 kg
Ord. No.
8202 0217 60
6003 6764 00
1202 6257 01
1202 6257 02
1202 6257 06
1202 6281 01
1202 6281 02
1202 6281 06
– 47 –
ECCO Head Office
Sweden
ECCO Subsidiaries
Belgium
ECCO Distributors:
Australia
Austria
Argentina
Bulgaria
Canada
Chile
China
Colombia
Croatia
Czech Republic
Denmark
Finland
France
Germany
Greece
Hungary
Iceland
India
Iran
Italy
Macedonia
Mexico
Netherlands
Norway
Peru
Poland
Portugal
Russia
Serbia
Slovakia
South Africa
South Korea
Spain
Switzerland
Turkey
Ukraine
United Kingdom
United States
ECCO Finishing AB
SE-532 22 Skara, Sweden Phone +46 511 134 45 Fax +46 511 180 13
E-mail [email protected] www.eccofinishing.com
Tryck: Skaraborgs Offset, Skövde. Mars 2012
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement