Canon PowerShot SX620 HS User manual

Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Camera User Guide
Other Shooting Modes
ENGLISH
P Mode
Playback Mode
Wi-Fi Functions
●● Make sure you read this guide, including the “Safety Precautions”
(= 12) section, before using the camera.
●● Reading this guide will help you learn to use the camera properly.
●● Store this guide safely so that you can use it in the future.
Setting Menu
●● Click the buttons in the lower right to access other pages.
: Next page
Accessories
: Previous page
: Page before you clicked a link
Appendix
●● To jump to the beginning of a chapter, click the chapter title at right.
© CANON INC. 2016
CEL-SW5VA210
Index
1
Before Use
Compatible Memory Cards
The following memory cards (sold separately) can be used, regardless of
capacity.
Before Use
Basic Guide
Advanced Guide
●● SD memory cards*
Initial Information
Package Contents
●● SDHC memory cards*
Camera Basics
●● SDXC memory cards*
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
* Cards conforming to SD standards. However, not all memory cards have been
verified to work with the camera.
P Mode
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Playback Mode
Wi-Fi Functions
Setting Menu
Camera
Battery Pack
NB-13L*
Accessories
Battery Charger
CB-2LH/CB-2LHE
Appendix
Index
Wrist Strap
* Do not peel off the adhesive covering from a battery pack.
●● Printed matter is also included.
●● A memory card is not included (= 2).
2
Preliminary Notes and Legal
Information
●● Take and review some test shots initially to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries
and affiliates, and its distributors are not liable for any consequential
damages arising from any malfunction of a camera or accessory,
including memory cards, that result in the failure of an image to be
recorded or to be recorded in a way that is machine readable.
●● The user’s unauthorized photographing or recording (video and/or
sound) of people or copyrighted materials may invade the privacy of
such people and/or may violate others’ legal rights, including copyright
and other intellectual property rights, even when such photographing
or recording is intended solely for personal use.
Conventions in This Guide
●● In this guide, icons are used to represent the corresponding camera
buttons and switches on which they appear or which they resemble.
Basic Guide
Advanced Guide
●● The following camera buttons and controls are represented by icons.
Numbers in parentheses indicate the numbers of corresponding
controls in “Part Names” (= 4).
[ ] Up button (6) on back
[ ] Left button (7) on back
[ ] Right button (12) on back
[ ] Down button (13) on back
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
●● Shooting modes and on-screen icons and text are indicated in
brackets.
●●
: Important information you should know
●● For information on camera warranty or Canon Customer Support,
please refer to the warranty information provided with your camera
User Manual Kit.
●●
: Notes and tips for expert camera use
●● Although the screen (monitor) is produced under extremely
high‑precision manufacturing conditions and more than 99.99% of the
pixels meet design specifications, in rare cases some pixels may be
defective or may appear as red or black dots. This does not indicate
camera damage or affect recorded images.
●● Instructions in this guide apply to the camera under default settings.
●● When the camera is used over an extended period, it may become
warm. This does not indicate damage.
Before Use
P Mode
Playback Mode
Wi-Fi Functions
●● = xx: Pages with related information (in this example, “xx” represents
a page number)
Setting Menu
●● For convenience, all supported memory cards are simply referred to as
the “memory card”.
Accessories
●● The symbols “ Still Images” and “ Movies” below titles indicate
how the function is used—whether for still images or movies.
Appendix
Index
3
Before Use
Part Names
(2) (3) (4) (5) (6)(7)(8)
(9)
(1)
(10)
(11)
Basic Guide
(2) (3)
Advanced Guide
(4)
Camera Basics
(5)
(6)
(7)
(8)
(9)
(1)
(12)
(13)
(14)
Auto Mode /
Hybrid Auto Mode
(10)
(11)
(12)
(13)
Other Shooting Modes
P Mode
(14)
Playback Mode
Wi-Fi Functions
(1)
Lens
(7)
Microphone
(1)
Screen (monitor)
(8)
Indicator
(2)
Speaker
(8)
Wi-Fi antenna area
(2)
DIGITAL terminal
(9)
[
(3)
Zoom lever
Shooting:‌[
[
Playback:‌[
[
(9)
Flash
(3)
HDMITM terminal
(10) Movie button
(4)
Mode switch
(11) FUNC. (Function) / SET button
(N-Mark)*
(5)
[
(Playback)] button
(12) [ (Flash)] / Right button
(12) Tripod socket
(6)
[
[
(Auto Zoom)] /
(Story Highlights)] / Up button
(13) [
button
(Information)] / Down
(7)
[
(14) [
] button
(telephoto)] /
(wide angle)]
(magnify)] /
(index)]
(10) [ (Flash pop up)] switch
(11)
(4)
Shutter button
(13) Memory card/battery cover
(5)
Lamp
(14) Strap mount
(6)
ON/OFF button
(Macro)] / Left button
Setting Menu
(Wi-Fi)] button
Accessories
Appendix
Index
* Used with NFC features (= 88).
4
Table of Contents
Before Use
Initial Information............................................................... 2
Package Contents..................................................................... 2
Compatible Memory Cards....................................................... 2
Preliminary Notes and Legal Information.................................. 3
Conventions in This Guide........................................................ 3
Part Names............................................................................... 4
Common Camera Operations..................................................11
Safety Precautions.................................................................. 12
Basic Guide
Basic Operations............................................................. 15
Initial Preparations.................................................................. 15
Advanced Guide
Camera Basics................................................................. 22
On/Off...................................................................................... 22
Power-Saving Features (Auto Power Down)..............................23
Power Saving in Shooting Mode............................................23
Power Saving in Playback Mode............................................23
Basic Guide
Advanced Guide
Camera Basics
Shutter Button......................................................................... 23
Auto Mode /
Hybrid Auto Mode
Shooting Display Options........................................................ 24
Other Shooting Modes
Using the FUNC. Menu........................................................... 24
Using the Menu Screen........................................................... 25
P Mode
On-Screen Keyboard.............................................................. 26
Indicator Display...................................................................... 27
Playback Mode
Clock....................................................................................... 27
Wi-Fi Functions
Auto Mode / Hybrid Auto Mode....................................... 28
Shooting with Camera-Determined Settings........................... 28
Attaching the Strap.....................................................................15
Holding the Camera....................................................................15
Charging the Battery Pack..........................................................16
Inserting the Battery Pack and Memory Card.............................16
Removing the Battery Pack and Memory Card......................17
Setting the Date and Time..........................................................17
Changing the Date and Time..................................................18
Display Language.......................................................................19
Shooting (Smart Auto)................................................................28
Shooting in Hybrid Auto Mode....................................................30
Digest Movie Playback...........................................................31
Still Images/Movies................................................................31
Still Images.............................................................................31
Movies....................................................................................32
Scene Icons................................................................................32
Image Stabilization Icons............................................................33
On-Screen Frames.....................................................................34
Trying the Camera Out............................................................ 19
Common, Convenient Features.............................................. 34
Shooting (Smart Auto)................................................................19
Viewing.......................................................................................21
Erasing Images......................................................................21
Before Use
Setting Menu
Accessories
Appendix
Index
Zooming In Closer on Subjects (Digital Zoom)...........................34
Auto Zooming in Response to Subject Movement
(Auto Zoom)................................................................................35
5
Using the Self-Timer...................................................................36
Using the Self-Timer to Avoid Camera Shake........................36
Customizing the Self-Timer....................................................36
Adding a Date Stamp.................................................................37
Continuous Shooting..................................................................38
Image Customization Features............................................... 38
Changing the Aspect Ratio.........................................................38
Changing the Number of Recording Pixels (Image Size)...........39
Guidelines for Choosing Recording Pixel Setting Based on
Paper Size (for 4:3 Images)...................................................39
Changing Movie Image Quality..................................................39
Helpful Shooting Features....................................................... 40
Displaying Grid Lines..................................................................40
Magnifying the Area in Focus.....................................................40
Changing the IS Mode Settings..................................................41
Deactivating Image Stabilization............................................41
Recording Movies with Subjects at the Same Size Shown
before Shooting......................................................................41
Customizing Camera Operation.............................................. 42
Deactivating the AF-Assist Beam...............................................42
Deactivating the Red-Eye Reduction Lamp................................42
Changing the Image Display Style after Shots...........................43
Changing the Image Display Period after Shots....................43
Changing the Screen Displayed after Shots..........................43
Other Shooting Modes..................................................... 44
Enjoying a Variety of Images from Each Shot
(Creative Shot)........................................................................ 44
Image Display during Playback..................................................45
Choosing Effects........................................................................45
Applying Special Effects.......................................................... 47
Shooting with a Fish-Eye Lens Effect (Fish-Eye Effect).............47
Shots Resembling Miniature Models (Miniature Effect)..............48
Playback Speed and Estimated Playback Time
(for One-Minute Clips)............................................................48
Shooting with a Toy Camera Effect (Toy Camera Effect)............49
Shooting in Monochrome............................................................49
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Special Modes for Other Purposes......................................... 50
Auto Shooting after Face Detection (Smart Shutter)..................50
Auto Shooting after Smile Detection (Smile)..........................50
Auto Shooting after Wink Detection (Wink Self-Timer)...........50
Auto Shooting after Detecting New Person
(Face Self-Timer)....................................................................51
Shooting Long Exposures (Long Shutter)..................................52
High-Speed Continuous Shooting (High-Speed Burst)..............52
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
P Mode.............................................................................. 53
Setting Menu
Shooting in Program AE ([P] Mode)........................................ 53
Image Brightness (Exposure).................................................. 54
Adjusting Image Brightness (Exposure Compensation).............54
Changing the Metering Method..................................................54
Changing the ISO Speed............................................................55
Correcting Image Brightness (i-Contrast)...................................55
Accessories
Appendix
Index
Image Colors........................................................................... 56
Adjusting White Balance.............................................................56
Custom White Balance...........................................................56
Changing Image Color Tones (My Colors).................................56
Custom Color.........................................................................57
Shooting Range and Focusing................................................ 58
Shooting Close-Ups (Macro)......................................................58
Specific Scenes....................................................................... 46
6
Shooting Distant Subjects (Infinity).............................................58
Digital Tele-Converter.................................................................59
Changing the AF Frame Mode...................................................59
Face AiAF...............................................................................59
Choosing Subjects to Focus On (Tracking AF)......................60
Center.....................................................................................61
Shooting with Servo AF..........................................................61
Changing the Focus Setting.......................................................62
Flash....................................................................................... 62
Changing the Flash Mode..........................................................62
Auto........................................................................................63
On...........................................................................................63
Slow Synchro.........................................................................63
Off...........................................................................................63
Image Viewing Options........................................................... 70
Magnifying Images.....................................................................70
Viewing Slideshows....................................................................70
Changing Slideshow Settings.................................................71
Auto Playback of Related Images (Smart Shuffle).....................71
Playback Mode................................................................. 64
Browsing and Filtering Images................................................ 67
Navigating through Images in an Index......................................67
Finding Images Matching Specified Conditions..........................68
Viewing Individual Images in a Group........................................69
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Erasing Images....................................................................... 74
Rotating Images...................................................................... 76
Switching Display Modes............................................................65
Overexposure Warning (for Image Highlights).......................66
Histogram...............................................................................66
GPS Information Display........................................................66
Viewing Short Movies Created When Shooting Still Images
(Digest Movies)...........................................................................66
Viewing by Date......................................................................67
Advanced Guide
Using the Menu..........................................................................72
Choosing Images Individually.....................................................73
Selecting a Range......................................................................73
Protecting All Images at Once....................................................74
Clearing All Protection at Once..............................................74
Changing the Compression Ratio (Image Quality).....................63
Changing the IS Mode Settings..................................................63
Viewing.................................................................................... 64
Basic Guide
Protecting Images................................................................... 72
Erasing Multiple Images at Once................................................75
Choosing a Selection Method................................................75
Choosing Images Individually.................................................75
Selecting a Range..................................................................76
Specifying All Images at Once................................................76
Other Settings......................................................................... 63
Before Use
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Using the Menu..........................................................................77
Deactivating Auto Rotation.........................................................77
Appendix
Tagging Images as Favorites.................................................. 78
Using the Menu..........................................................................78
Index
Editing Still Images.................................................................. 79
Resizing Images.........................................................................79
Cropping.....................................................................................79
Changing Image Color Tones (My Colors).................................80
Correcting Image Brightness (i-Contrast)...................................81
Correcting Red-Eye....................................................................81
Editing Movies......................................................................... 82
Editing Digest Movies.................................................................83
7
Viewing Albums (Story Highlights).......................................... 84
Image Sending Options......................................................... 105
Choosing Themes for Albums................................................84
Adding Background Music to Albums.........................................85
Creating Your Own Albums.........................................................85
Sending Multiple Images..........................................................105
Selecting a Range................................................................105
Sending Favorite Images.....................................................106
Notes on Sending Images........................................................106
Choosing the Number of Recording Pixels (Image Size).........107
Adding Comments....................................................................107
Wi-Fi Functions................................................................ 87
Available Wi-Fi Features......................................................... 87
Sending Images to a Smartphone........................................... 88
Sending Images to an NFC-Compatible Smartphone................88
Connecting via NFC When Camera Is Off or in Shooting
Mode......................................................................................88
Connecting via NFC When Camera Is in Playback Mode......90
Adding a Smartphone.................................................................91
Using Another Access Point.......................................................93
Previous Access Points..............................................................93
Saving Images to a Computer................................................. 94
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Initial Preparations....................................................................108
Preparing the Camera..........................................................108
Preparing the Computer.......................................................108
Sending Images........................................................................109
Viewing Images Sent via Image Sync on a Smartphone.....109
Other Shooting Modes
P Mode
Playback Mode
Using a Smartphone to View Camera Images and Control
the Camera............................................................................110
Wi-Fi Functions
Geotagging Images on the Camera......................................... 110
Shooting Remotely................................................................... 110
Setting Menu................................................................... 114
Sending Images to a Registered Web Service........................ 99
Adjusting Basic Camera Functions........................................114
Registering Web Services..........................................................99
Registering CANON iMAGE GATEWAY...............................100
Registering Other Web Services..........................................101
Uploading Images to Web Services.........................................102
Silencing Camera Operations................................................... 114
Adjusting the Volume................................................................ 114
Hiding Hints and Tips................................................................ 115
Date and Time.......................................................................... 115
World Clock.............................................................................. 115
Lens Retraction Timing............................................................. 116
Using Eco Mode....................................................................... 116
Printing Images Wirelessly from a Connected Printer........... 103
Basic Guide
Sending Images Automatically (Image Sync)........................ 108
Preparing to Register a Computer..............................................94
Installing the Software............................................................94
Configuring the Computer for a Wi-Fi Connection
(Windows Only)......................................................................95
Saving Images to a Connected Computer..................................95
Confirming Access Point Compatibility...................................95
Using WPS-Compatible Access Points..................................96
Connecting to Listed Access Points.......................................98
Previous Access Points..........................................................99
Sending Images to Another Camera..................................... 104
Before Use
Setting Menu
Editing or Erasing Wi-Fi Settings........................................... 111
Editing Connection Information................................................ 111
Changing a Device Nickname.............................................. 112
Erasing Connection Information........................................... 112
Changing the Camera Nickname............................................. 112
Returning the Wi-Fi Settings to Default.................................... 113
Accessories
Appendix
Index
8
Power-Saving Adjustment........................................................ 116
Screen Brightness.................................................................... 117
Hiding the Start-Up Screen....................................................... 117
Formatting Memory Cards........................................................ 117
Low-Level Formatting........................................................... 118
File Numbering......................................................................... 118
Date-Based Image Storage...................................................... 119
Metric / Non-Metric Display...................................................... 119
Checking Certification Logos.................................................... 119
Display Language..................................................................... 119
Adjusting Other Settings...........................................................120
Restoring Default Camera Settings..........................................120
Accessories.................................................................... 121
System Map.......................................................................... 121
Optional Accessories............................................................. 122
Power Supplies.........................................................................122
Flash Unit.................................................................................123
Other Accessories....................................................................123
Printers.....................................................................................123
Photo and Movie Storage.........................................................123
Using Optional Accessories.................................................. 124
Playback on a TV.....................................................................124
Playback on a High-Definition TV.........................................124
Using the Software................................................................ 125
Computer Connections via a Cable..........................................125
Checking Your Computer Environment................................125
Installing the Software..............................................................125
Saving Images to a Computer..................................................126
Printing Images..................................................................... 127
Easy Print.................................................................................127
Configuring Print Settings.........................................................128
Cropping Images before Printing..........................................129
Choosing Paper Size and Layout before Printing................129
Available Layout Options......................................................130
Printing ID Photos................................................................130
Printing Movie Scenes..............................................................130
Movie Printing Options.........................................................130
Adding Images to the Print List (DPOF)...................................131
Configuring Print Settings.....................................................131
Setting Up Printing for Individual Images.............................131
Setting Up Printing for a Range of Images...........................132
Setting Up Printing for All Images.........................................132
Clearing All Images from the Print List.................................132
Printing Images Added to the Print List (DPOF)...................132
Adding Images to a Photobook................................................133
Choosing a Selection Method..............................................133
Adding Images Individually...................................................133
Adding All Images to a Photobook.......................................133
Removing All Images from a Photobook..............................133
Appendix......................................................................... 134
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Troubleshooting..................................................................... 134
On-Screen Messages........................................................... 138
On-Screen Information.......................................................... 140
Shooting (Information Display).................................................140
Battery Level........................................................................140
Playback (Detailed Information Display)...................................141
Summary of Movie Control Panel.........................................141
9
Functions and Menu Tables.................................................. 142
Functions Available in Each Shooting Mode............................142
FUNC. Menu.............................................................................143
Shooting Tab.............................................................................145
Set Up Tab................................................................................147
Playback Tab............................................................................147
Print Tab...................................................................................148
Playback Mode FUNC. Menu...................................................148
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Handling Precautions............................................................ 148
Other Shooting Modes
Specifications........................................................................ 149
Camera.................................................................................149
Number of Shots/Recording Time, Playback Time...............150
Shooting Range....................................................................150
Number of Shots per Memory Card.....................................151
Recording Time per Memory Card.......................................151
Battery Pack NB-13L............................................................152
Battery Charger CB-2LH/CB-2LHE......................................152
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Index..................................................................................... 153
Accessories
Wi-Fi (Wireless LAN) Precautions......................................... 155
Radio Wave Interference Precautions......................................155
Security Precautions.................................................................155
Trademarks and Licensing...................................................156
Disclaimer.............................................................................157
Appendix
Index
10
Common Camera Operations
Shoot
●● Use camera-determined settings (Auto Mode, Hybrid Auto Mode)
-- = 28, = 30
●● See several effects applied to each shot, using camera-determined
settings (Creative Shot Mode)
-- = 44
Shooting people well
Before Use
●● Without using the flash (Flash Off)
-- = 63
Basic Guide
●● Include yourself in the shot (Self-Timer)
-- = 36, = 51
Advanced Guide
Camera Basics
●● Add a date stamp
-- = 37
Auto Mode /
Hybrid Auto Mode
●● Movie clips and photos together (Movie Digest)
-- = 30
Other Shooting Modes
View
Portraits
(= 46)
P Mode
●● View images (Playback Mode)
-- = 64
Playback Mode
●● Automatic playback (Slideshow)
-- = 70
Wi-Fi Functions
Setting Menu
●● On a TV
-- = 124
Matching specific scenes
Low Light
(= 46)
●● Focus on faces
-- = 28, = 46, = 59
Accessories
●● On a computer
-- = 125
Fireworks
(= 46)
●● Browse through images quickly
-- = 67
Appendix
Index
●● Erase images
-- = 74
Applying special effects
Vivid Colors
(= 47)
Poster Effect
(= 47)
Fish-Eye Effect
(= 47)
Miniature Effect
(= 48)
Toy Camera Effect
(= 49)
Monochrome
(= 49)
●● Create an album automatically
-- = 84
Record/View Movies
●● Record movies
-- = 28
●● View movies (Playback Mode)
-- = 64
11
Print
●● Print pictures
-- = 127
Save
●● Save images to a computer via a cable
-- = 126
Use Wi-Fi Functions
●● Send images to a smartphone
-- = 88
●● Share images online
-- = 99
●● Send images to a computer
-- = 94
Safety Precautions
●● Before using the product, ensure that you read the safety precautions
described below. Always ensure that the product is used correctly.
Before Use
Basic Guide
Advanced Guide
●● The safety precautions noted here are intended to prevent you and
other persons from being injured or incurring property damage.
Camera Basics
●● Be sure to also check the guides included with any separately sold
accessories you use.
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Warning
Denotes the possibility of serious injury or death.
P Mode
●● Do not trigger the flash in close proximity to people’s eyes.
Exposure to the intense light produced by the flash could damage
eyesight. In particular, remain at least 1 meter (3.3 feet) away from infants
when using the flash.
Playback Mode
Wi-Fi Functions
Setting Menu
●● Store this equipment out of the reach of children and infants.
A strap wound around a child’s neck may result in asphyxiation.
If your product uses a power cord, mistakenly winding the cord around a
child’s neck may result in asphyxiation.
●● Use only recommended power sources.
●● Do not disassemble, alter, or apply heat to the product.
Accessories
Appendix
Index
●● Do not peel off the adhesive covering, if the battery pack has it.
●● Avoid dropping or subjecting the product to severe impacts.
●● Do not touch the interior of the product if it is broken, such as when
dropped.
●● Stop using the product immediately if it emits smoke or a strange
smell, or otherwise behaves abnormally.
●● Do not use organic solvents such as alcohol, benzine, or thinner to
clean the product.
12
●● Avoid contact with liquid, and do not allow liquid or foreign objects
inside.
This could result in electrical shock or fire.
If the product gets wet, or if liquid or foreign objects get inside, remove the
battery pack/batteries or unplug immediately.
●● Turn the camera off in places where camera use is prohibited.
The electromagnetic waves emitted by the camera may interfere with the
operation of electronic instruments and other devices. Exercise adequate
caution when using the product in places where use of electronic devices
is restricted, such as inside airplanes and medical facilities.
●● If your model has a viewfinder or interchangeable lens, do not look
through the viewfinder or lens at bright light sources (such as the sun
on a clear day, or a bright artificial light source).
This may damage your eyesight.
●● Do not allow the camera to maintain contact with skin for extended
periods.
Even if the camera does not feel hot, this may cause low-temperature
burns, manifested in redness of the skin or blistering. Use a tripod in hot
places, or if you have poor circulation or insensitive skin.
●● If your model has an interchangeable lens, do not leave the lens (or
the camera with the lens attached) in the sun without the lens cap on.
This could result in a fire.
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Caution
●● When carrying the product by the strap, be careful not to bang it,
subject it to strong impacts or shocks, or let it get caught on other
objects.
●● Use only the recommended battery pack/batteries.
●● Be careful not to bump or push strongly on the lens.
This could lead to injury or damage the camera.
●● If the product uses a battery charger, note the following precautions.
-- Remove the plug periodically and, using a dry cloth, wipe away any
dust and dirt that has collected on the plug, the exterior of the power
outlet, and the surrounding area.
-- Do not insert or remove the plug with wet hands.
-- Do not use the equipment in a manner that exceeds the rated
capacity of the electrical outlet or wiring accessories. Do not use if
the plug is damaged or not fully inserted in the outlet.
-- Do not allow dust or metal objects (such as pins or keys) to contact
the terminals or plug.
-- Do not cut, damage, alter, or place heavy items on the power cord,
if your product uses one.
This could result in electrical shock or fire.
Basic Guide
Denotes the possibility of injury.
●● Do not touch the product during thunderstorms if it is plugged in.
This could result in electrical shock or fire. Immediately stop using the
product and distance yourself from it.
●● Do not place the battery pack/batteries near or in direct flame.
This may cause the battery pack/batteries to explode or leak, resulting in
electrical shock, fire, or injuries. If leaking battery electrolyte comes into
contact with eyes, mouth, skin, or clothing, immediately flush with water.
Before Use
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
●● Be careful not to subject the screen to strong impacts.
If the screen cracks, injury may result from the broken fragments.
●● When using the flash, be careful not to cover it with your fingers or
clothing.
This could result in burns or damage to the flash.
Accessories
Appendix
Index
●● Avoid using, placing, or storing the product in the following places:
-- Places subject to direct sunlight
-- Places subject to temperatures above 40 °C (104 °F)
-- Humid or dusty places
These could cause leakage, overheating, or an explosion of the battery
pack/batteries, resulting in electrical shock, fire, burns, or other injuries.
Overheating and damage may result in electrical shock, fire, burns, or
other injuries.
●● The slideshow transition effects may cause discomfort when viewed
for prolonged periods.
13
●● When using optional lenses, lens filters, or filter adapters
(if applicable), be sure to attach these accessories firmly.
If the lens accessory becomes loose and falls off, it may crack, and the
shards of glass may lead to cuts.
●● On products that raise and lower the flash automatically, make sure to
avoid pinching your fingers with the lowering flash.
This could result in injury.
Caution
Denotes the possibility of property damage.
●● Do not aim the camera at intense light sources, such as the sun on a
clear day or an intense artificial light source.
Doing so may damage the image sensor or other internal components.
●● When using the camera on a sandy beach or at a windy location,
be careful not to allow dust or sand to enter the camera.
●● Do not leave any dedicated battery packs near pets.
Pets biting the battery pack could cause leakage, overheating,
or explosion, resulting in product damage or fire.
●● If your product uses multiple batteries, do not use batteries that
have different levels of charge together, and do not use old and
new batteries together. Do not insert the batteries with the + and –
terminals reversed.
This may cause the product to malfunction.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● Do not sit down with the camera in your pant pocket.
Doing so may cause malfunctions or damage the screen.
Other Shooting Modes
●● When putting the camera in your bag, ensure that hard objects do not
come into contact with the screen. Also close the screen (so that it
faces the body), if your product’s screen closes.
P Mode
Playback Mode
●● Do not attach any hard objects to the product.
Doing so may cause malfunctions or damage the screen.
Wi-Fi Functions
●● On products that raise and lower the flash automatically, do not push
the flash down or pry it open.
This may cause the product to malfunction.
Setting Menu
Accessories
●● Wipe off any dust, grime, or other foreign matter on the flash with a
cotton swab or cloth.
The heat emitted from the flash may cause foreign matter to smoke or the
product to malfunction.
●● Remove and store the battery pack/batteries when you are not using
the product.
Any battery leakage that occurs may cause product damage.
Appendix
Index
●● Before you discard the battery pack/batteries, cover the terminals with
tape or other insulators.
Contacting other metal materials may lead to fire or explosions.
●● Unplug any battery charger used with the product when not in use.
Do not cover with a cloth or other objects when in use.
Leaving the unit plugged in for a long period of time may cause it to
overheat and distort, resulting in fire.
14
Basic Guide
Initial Preparations
Prepare for shooting as follows.
Before Use
Basic Guide
Advanced Guide
Attaching the Strap
Basic Operations
Basic information and instructions, from initial preparations to shooting
and playback
(2)
(1)
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● Thread the end of the strap through the
strap mount (1), and then pull the other
end of the strap through the loop on the
threaded end (2).
Other Shooting Modes
P Mode
Playback Mode
Holding the Camera
Wi-Fi Functions
Setting Menu
●● Place the strap around your wrist.
●● When shooting, keep your arms close to
your body and hold the camera securely
to prevent it from moving. If you have
raised the flash, do not rest your fingers
on it.
Accessories
Appendix
Index
15
Charging the Battery Pack
Before use, charge the battery pack with the included charger. Be sure to
charge the battery pack initially, because the camera is not sold with the
battery pack charged.
1
(1)
(2)
●● After aligning the
marks on the battery
pack and charger, insert the battery pack
by pushing it in (1) and down (2).
2
(2)
(1)
CB-2LH
Insert the battery pack.
Charge the battery pack.
●● CB-2LH: Flip out the plug (1) and plug
the charger into a power outlet (2).
●● CB-2LHE: Plug the power cord into the
charger, then plug the other end into a
power outlet.
●● The charging lamp turns orange, and
charging begins.
CB-2LHE
●● When charging is finished, the lamp turns
green.
3
(1)
(2)
Remove the battery pack.
●● For details on charging time and the number of shots and
recording time possible with a fully charged battery pack, see
“Number of Shots/Recording Time, Playback Time” (= 150).
●● Charged battery packs gradually lose their charge, even when
they are not used. Charge the battery pack on (or immediately
before) the day of use.
●● The charger can be used in areas with 100 – 240 V AC power
(50/60 Hz). For power outlets in a different format, use a
commercially available adapter for the plug. Never use an
electrical transformer designed for traveling, which may damage
the battery pack.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Inserting the Battery Pack and Memory Card
Playback Mode
Insert the included battery pack and a memory card (sold separately).
Note that before using a memory card that is new or has been formatted
in another device, you should format the memory card with this camera
(= 117).
1
(1)
Wi-Fi Functions
Setting Menu
Open the cover.
Accessories
●● Slide the switch (1) and open the cover
(2).
(2)
Appendix
Index
●● After unplugging the battery charger,
remove the battery pack by pushing it in
(1) and up (2).
●● To protect the battery pack and keep it in optimal condition, do not
charge it continuously for more than 24 hours.
●● For battery chargers that use a power cord, do not attach
the charger or cord to other objects. Doing so could result in
malfunction or damage to the product.
16
2
(1)
(2)
(3)
Insert the battery pack.
●● Holding the battery pack with the
terminals in the position shown (1), hold
the battery lock toward (2) and insert
the battery pack toward (3) until the lock
clicks shut.
●● If you insert the battery pack facing the
wrong way, it cannot be locked into the
correct position. Always confirm that the
battery pack is facing the right way and
locks when inserted.
(1)
3
Check your card’s write-protect
switch and insert the memory card.
●● Recording is not possible on memory
cards with a write-protect switch when the
switch is in the locked position. Move the
switch toward (1).
(2)
●● Insert the memory card with the label (2)
facing as shown until it clicks into place.
●● Make sure the memory card is facing the
right way when you insert it. Inserting
memory cards facing the wrong way may
damage the camera.
4
(2)
Close the cover.
●● Lower the cover (1) and hold it down as
you slide the switch, until it clicks into the
closed position (2).
(1)
●● For guidelines on how many shots or hours of recording can be
saved on one memory card, see “Number of Shots per Memory
Card” (= 151).
Before Use
Basic Guide
Advanced Guide
Removing the Battery Pack and Memory Card
Camera Basics
Auto Mode /
Hybrid Auto Mode
Remove the battery pack.
●● Open the cover and press the battery
lock in the direction of the arrow.
Other Shooting Modes
●● The battery pack will pop up.
P Mode
Playback Mode
Remove the memory card.
Wi-Fi Functions
●● Push the memory card in until it clicks,
and then slowly release it.
Setting Menu
●● The memory card will pop up.
Accessories
Appendix
Setting the Date and Time
Set the current date and time correctly as follows if the [Date/Time] screen
is displayed when you turn the camera on. Information you specify this
way is recorded in image properties when you shoot, and it is used when
you manage images by shooting date or print images showing the date.
You can also add a date stamp to shots, if you wish (= 37).
1
Index
Turn the camera on.
●● Press the ON/OFF button.
●● The [Date/Time] screen is displayed.
17
2
Changing the Date and Time
Set the date and time.
●● Press the [ ][ ] buttons to choose an
item.
●● Press the [ ][
date and time.
] buttons to specify the
●● When finished, press the [
Before Use
Adjust the date and time as follows.
1
●● Press the [
Camera Basics
Specify your home time zone.
●● Press the [ ][ ] buttons to choose your
home time zone.
Finish the setup process.
●● Press the [ ] button when finished.
After a confirmation message, the setting
screen is no longer displayed.
●● To turn off the camera, press the ON/OFF
button.
●● Unless you set the date, time, and home time zone, the [Date/
Time] screen will be displayed each time you turn the camera on.
Specify the correct information.
Auto Mode /
Hybrid Auto Mode
Choose [Date/Time].
●● Move the zoom lever to choose the [
tab.
4
Advanced Guide
] button.
] button.
2
3
Basic Guide
Access the menu screen.
]
Other Shooting Modes
●● Press the [ ][ ] buttons to choose
[Date/Time], and then press the [ ]
button.
3
P Mode
Playback Mode
Change the date and time.
Wi-Fi Functions
●● Follow step 2 in “Setting the Date and
Time” (= 17) to adjust the settings.
●● Press the [
menu screen.
Setting Menu
] button to close the
●● Date/time settings can be retained for about 3 weeks by the
camera’s built-in date/time battery (backup battery) after the
battery pack is removed.
●● The date/time battery will be charged in about 4 hours once you
insert a charged battery pack, even if the camera is left off.
●● Once the date/time battery is depleted, the [Date/Time] screen will
be displayed when you turn the camera on. Set the correct date
and time as described in “Setting the Date and Time” (= 17).
Accessories
Appendix
Index
●● To set daylight saving time (1 hour ahead), choose [ ] in step 2
and then choose [ ] by pressing the [ ][ ] buttons.
18
Display Language
Before Use
Trying the Camera Out
Change the display language as needed.
1
Still Images
Enter Playback mode.
●● Press the [
] button.
Movies
Follow these instructions to turn the camera on, shoot still images or
movies, and then view them.
Basic Guide
Advanced Guide
Camera Basics
Shooting (Smart Auto)
2
Access the setting screen.
●● Press and hold the [ ] button, and then
immediately press the [
] button.
Auto Mode /
Hybrid Auto Mode
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1
Other Shooting Modes
Turn the camera on.
P Mode
●● Press the ON/OFF button.
3
Set the display language.
●● Press the [ ][ ][ ][ ] buttons to choose
a language, and then press the [ ]
button.
●● Once the display language has been set,
the setting screen is no longer displayed.
Wi-Fi Functions
2
Enter [
Setting Menu
] mode.
●● Set the mode switch to [
].
Accessories
●● Press the [ ] button, press the [ ][ ]
buttons to choose [
], and then press
the [ ] button again.
●● Press the [ ][ ] buttons to choose
[
], and then press the [ ] button.
●● The current time is displayed if you wait too long in step 2 after
] button.
pressing the [ ] button before you press the [
In this case, press the [ ] button to dismiss the time display and
repeat step 2.
●● You can also change the display language by pressing the
] button and choosing [Language
] on the [ ] tab.
[
Playback Mode
●● The startup screen is displayed.
Appendix
Index
●● Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
●● Icons representing the scene and image
stabilization mode are displayed in the
upper right of the screen.
●● Frames displayed around any detected
subjects indicate that they are in focus.
19
3
Compose the shot.
2) Shoot.
●● To zoom in and enlarge the subject, move
the zoom lever toward [ ] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle).
●● Press the shutter button all the way
down.
4
●● As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
1) Focus.
●● Keep the camera still until the shutter
sound ends.
Shoot.
Shooting Still Images
●● Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and frames are displayed to
indicate image areas in focus.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● After displaying your shot, the camera will
revert to the shooting screen.
Other Shooting Modes
Recording Movies
P Mode
1) Start recording.
(1)
●● If [Raise the flash] is displayed, move
the [ ] switch to raise the flash. It will fire
when shooting. If you prefer not to use
the flash, push it down with your finger,
into the camera.
Playback Mode
●● Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time (1).
Wi-Fi Functions
Setting Menu
●● Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
●● Frames displayed around any detected
faces indicate that they are in focus.
●● Once recording begins, take your finger
off the movie button.
Accessories
Appendix
Index
2) Finish recording.
●● Press the movie button again to stop
recording. The camera beeps twice as
recording stops.
20
3
Viewing
After shooting images or movies, you can view them on the screen as
follows.
1
●● To adjust the volume, press the [
buttons during playback.
] button.
●● Your last shot is displayed.
2
Before Use
●● Playback now begins, and after the movie
] is displayed.
is finished, [
Enter Playback mode.
●● Press the [
Play movies.
●● Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press the
[ ] button again.
][
Basic Guide
Advanced Guide
Camera Basics
]
Auto Mode /
Hybrid Auto Mode
●● To switch to Shooting mode from Playback mode, press the
shutter button halfway.
Choose images.
●● To view the previous image, press the [ ]
button. To view the next image, press the
[ ] button.
Other Shooting Modes
P Mode
Erasing Images
Playback Mode
You can choose and erase unneeded images one by one. Be careful
when erasing images, because they cannot be recovered.
1
Wi-Fi Functions
Choose an image to erase.
Setting Menu
●● Press the [ ][ ] buttons to choose an
image.
●● To access this screen (Scroll Display
mode), press and hold the [ ][ ] buttons
for at least one second. In this mode,
press the [ ][ ] buttons to browse
through images.
●● To return to single-image display, press
the [ ] button.
●● Movies are identified by a [
To play movies, go to step 3.
] icon.
2
Accessories
Erase the image.
●● Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press the
[ ] button again.
Appendix
Index
●● After [Erase?] is displayed, press the
[ ][ ] buttons to choose [Erase], and
then press the [ ] button.
●● The current image is now erased.
●● To cancel erasure, press the [ ][ ]
buttons to choose [Cancel], and then
press the [ ] button.
●● You can choose multiple images to erase at once (= 75).
21
Advanced Guide
Before Use
On/Off
Basic Guide
Shooting Mode
Advanced Guide
●● Press the ON/OFF button to turn the
camera on and prepare for shooting.
Camera Basics
Camera Basics
●● To turn the camera off, press the ON/OFF
button again.
Auto Mode /
Hybrid Auto Mode
Playback Mode
Other basic operations and more ways to enjoy your camera, including
shooting and playback options
Other Shooting Modes
●● Press the [
] button to turn the camera
on and view your shots.
●● To turn the camera off, press the [
button again.
P Mode
]
Playback Mode
Wi-Fi Functions
●● To switch to Playback mode from Shooting mode, press the [
]
button.
●● To switch to Shooting mode from Playback mode, press the
shutter button halfway (= 23).
●● The lens will be retracted after about one minute once the camera
is in Playback mode. You can turn the camera off when the lens is
] button.
retracted by pressing the [
Setting Menu
Accessories
Appendix
Index
22
Power-Saving Features (Auto Power Down)
As a way to conserve battery power, the camera automatically deactivates
the screen (Display Off) and then turns itself off after a specific period of
inactivity.
Power Saving in Shooting Mode
The screen is automatically deactivated after about one minute of
inactivity. In about two more minutes, the lens is retracted and the camera
turns itself off. To activate the screen and prepare for shooting when
the screen is off but the lens is still out, press the shutter button halfway
(= 23).
Power Saving in Playback Mode
The camera turns itself off automatically after about five minutes of
inactivity.
●● You can deactivate Auto Power Down and adjust the timing of
Display Off, if you prefer (= 116).
●● Power saving is not active while the camera is connected to other
devices via Wi-Fi (= 87), or when connected to a computer
(= 126).
Before Use
Shutter Button
To ensure your shots are in focus, always begin by holding the shutter
button halfway down, and once the subject is in focus, press the button all
the way down to shoot.
In this manual, shutter button operations are described as pressing the
button halfway or all the way down.
1
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Press halfway. (Press lightly to
focus.)
Other Shooting Modes
●● Press the shutter button halfway. The
camera beeps twice, and frames are
displayed around image areas in focus.
2
P Mode
Playback Mode
Press all the way down. (From the
halfway position, press fully to shoot.)
Wi-Fi Functions
●● The camera shoots, as a shutter sound
is played.
Setting Menu
●● Keep the camera still until the shutter
sound ends.
Accessories
●● Images may be out of focus if you shoot without initially pressing
the shutter button halfway.
●● Length of shutter sound playback varies depending on the time
required for the shot. It may take longer in some shooting scenes,
and images will be blurry if you move the camera (or the subject
moves) before the shutter sound ends.
Appendix
Index
23
Shooting Display Options
Press the [ ] button to view other information on the screen, or to hide
the information. For details on the information displayed, see “On-Screen
Information” (= 140).
Before Use
Using the FUNC. Menu
Configure commonly used functions through the FUNC. menu as follows.
Note that menu items and options vary depending on the shooting mode
(= 143) or playback mode (= 148).
1
Advanced Guide
Camera Basics
Access the FUNC. menu.
●● Press the [
Information is displayed
Basic Guide
Auto Mode /
Hybrid Auto Mode
] button.
Other Shooting Modes
2
No information is displayed
(1)
●● Screen brightness is automatically increased by the night view
function when you are shooting under low light, making it easier
to check how shots are composed. However, on-screen image
brightness may not match the brightness of your shots. Note that
any on-screen image distortion or jerky subject motion will not
affect recorded images.
●● For playback display options, see “Switching Display Modes”
(= 65).
Choose a menu item.
P Mode
●● Press the [ ][ ] buttons to choose a
menu item (1), and then press the [ ] or
[ ] button.
(2)
Playback Mode
●● Available options (2) are listed next to
menu items, on the right.
Wi-Fi Functions
●● Depending on the menu item, functions
can be specified simply by pressing the
[ ] or [ ] button, or another screen is
displayed for configuring the function.
Setting Menu
3
Accessories
Appendix
Choose an option.
●● Press the [
option.
][
] buttons to choose an
] icon can
●● Items labeled with a [
be configured by pressing the [
button.
Index
]
●● To return to the menu items, press the
[ ] button.
24
4
Confirm your choice and exit.
●● Press the [
] button.
●● The screen before you pressed the
[ ] button in step 1 is displayed again,
showing the option you configured.
●● To undo any accidental setting changes, you can restore the
camera’s default settings (= 120).
Before Use
Using the Menu Screen
Configure a variety of camera functions through the menu screen as
follows. Menu items are grouped by purpose on tabs, such as shooting
[ ], playback [ ], and so on. Note that available menu items vary
depending on the selected shooting or playback mode (= 145 – = 148).
1
Basic Guide
Advanced Guide
Camera Basics
Access the menu screen.
●● Press the [
Auto Mode /
Hybrid Auto Mode
] button.
Other Shooting Modes
2
P Mode
Choose a tab.
Playback Mode
●● Move the zoom lever to choose a tab.
●● After you have pressed the [ ][ ]
buttons to choose a tab initially, you can
switch between tabs by pressing the
[ ][ ] buttons.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
25
3
Choose a menu item.
●● Press the [ ][
menu item.
] buttons to choose a
●● For menu items with options not shown,
first press the [ ] or [ ] button to switch
screens, and then press the [ ][ ]
buttons to select the menu item.
●● To return to the previous screen, press
] button.
the [
4
Choose an option.
●● Press the [ ][ ] buttons to choose an
option.
5
Confirm your choice and exit.
●● Press the [
] button to return to the
screen displayed before you pressed the
[
] button in step 1.
Before Use
On-Screen Keyboard
Use the on-screen keyboard to enter information for Wi-Fi connections
(= 88). Note that the length and type of information you can enter
varies depending on the function you are using.
Basic Guide
Advanced Guide
Camera Basics
Entering Characters
Auto Mode /
Hybrid Auto Mode
●● Press the [ ][ ][ ][ ] buttons to choose
a character, and then press the [ ]
button to enter it.
Other Shooting Modes
Moving the Cursor
●● Choose [
button.
P Mode
] or [
] and press the [
]
Playback Mode
Deleting Characters
Wi-Fi Functions
●● Choose [ ] and press the [ ] button.
The previous character will be deleted.
Setting Menu
Accessories
Confirming Input and Returning to the
Previous Screen
●● Press the [
Appendix
] button.
Index
●● To undo any accidental setting changes, you can restore the
camera’s default settings (= 120).
26
Indicator Display
The indicator on the back of the camera (= 4) blinks in green at these
times.
-- Connected to a computer (= 126)
-- Display off (= 23, = 116)
-- Starting up, recording, or reading
-- Communicating with other devices
-- Shooting long exposures (= 52)
-- Connecting/transmitting via Wi-Fi
Before Use
Clock
Basic Guide
You can check the current time.
●● Press and hold the [
] button.
Advanced Guide
●● The current time appears.
Camera Basics
●● If you hold the camera vertically while
using the clock function, it will switch to
vertical display. Press the [ ][ ] buttons
to change the display color.
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
●● Press the [ ] button again to cancel the
clock display.
P Mode
●● When the indicator blinks green, do not turn the camera off, or
open the memory card/battery cover, or shake or hit the camera.
This may corrupt images or damage the camera or memory card.
Playback Mode
Wi-Fi Functions
●● When the camera is off, press and hold the [ ] button, then
press the ON/OFF button to display the clock.
Setting Menu
Accessories
Appendix
Index
27
Shooting with Camera-Determined
Settings
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
Auto Mode /
Hybrid Auto Mode
Convenient mode for easy shots with greater control over shooting
Before Use
Basic Guide
Advanced Guide
Camera Basics
Shooting (Smart Auto)
Auto Mode /
Hybrid Auto Mode
Still Images
1
Movies
Other Shooting Modes
Turn the camera on.
P Mode
●● Press the ON/OFF button.
Playback Mode
●● The startup screen is displayed.
Wi-Fi Functions
2
Enter [
Setting Menu
] mode.
●● Set the mode switch to [
].
Accessories
●● Press the [ ] button, press the [ ][ ]
buttons to choose [
], and then press
the [ ] button again.
●● Press the [ ][ ] buttons to choose
[
], and then press the [ ] button.
Appendix
Index
●● Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
●● Icons representing the scene and
image stabilization mode are displayed
in the upper right of the screen
(= 32, = 33).
●● Frames displayed around any detected
subjects indicate that they are in focus.
28
3
(1)
Compose the shot.
2) Shoot.
●● To zoom in and enlarge the subject, move
the zoom lever toward [ ] (telephoto),
and to zoom away from the subject, move
it toward [ ] (wide angle). (A zoom
bar (1) showing the zoom position is
displayed.)
●● Press the shutter button all the way
down.
●● To zoom in or out quickly, move the zoom
lever all the way toward [ ] (telephoto)
or [ ] (wide angle), and to zoom in
or out slowly, move it just a little in the
desired direction.
●● Keep the camera still until the shutter
sound ends.
●● As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
4
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Recording Movies
P Mode
1) Start recording.
1) Focus.
●● Several AF frames are displayed when
multiple areas are in focus.
Basic Guide
●● After displaying your shot, the camera will
revert to the shooting screen.
Shoot.
Shooting Still Images
●● Press the shutter button halfway. The
camera beeps twice after focusing, and
frames are displayed to indicate image
areas in focus.
Before Use
(1)
Playback Mode
●● Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time (1).
Wi-Fi Functions
Setting Menu
●● Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
●● Frames displayed around any detected
faces indicate that they are in focus.
●● Once recording begins, take your finger
off the movie button.
Accessories
Appendix
Index
●● If [Raise the flash] is displayed, move
the [ ] switch to raise the flash. It will fire
when shooting. If you prefer not to use
the flash, push it down with your finger,
into the camera.
29
2)Resize the subject and recompose
the shot as needed.
●● To resize the subject, repeat the
operations in step 3.
However, note that the sound of camera
operations will be recorded. Note that
movies shot at zoom factors shown in
blue will look grainy.
●● When you recompose shots, the
focus, brightness, and colors will be
automatically adjusted.
3) Finish recording.
●● Press the movie button again to stop
recording. The camera beeps twice as
recording stops.
●● Recording will stop automatically when
the memory card becomes full.
Shooting in Hybrid Auto Mode
Still Images
Movies
You can make a short movie of the day just by shooting still images. The
camera records 2 – 4-second clips of scenes before each shot, which are
later combined in a digest movie.
1
Enter [
2
Compose the shot.
●● Follow steps 3 – 4 in “Shooting (Smart
Auto)” (= 28) to compose the shot and
focus.
●● For more impressive digest movies,
aim the camera at subjects about four
seconds before shooting still images.
3
Before Use
Basic Guide
Advanced Guide
Camera Basics
Shoot.
Auto Mode /
Hybrid Auto Mode
●● Follow step 4 in “Shooting (Smart Auto)”
(= 28) to shoot a still image.
Other Shooting Modes
●● The camera records both a still image
and movie clip. The clip, which ends with
the still image and a shutter sound, forms
a single chapter in the digest movie.
P Mode
Playback Mode
Wi-Fi Functions
●● Battery life is shorter in this mode than in [
] mode, because
digest movies are recorded for each shot.
●● A digest movie may not be recorded if you shoot a still image
] mode,
immediately after turning the camera on, choosing [
or operating the camera in other ways.
●● Camera operating sounds will be recorded in digest movies.
Setting Menu
Accessories
Appendix
Index
] mode.
●● Set the mode switch to [
].
30
●● Digest movie quality is [ ] and cannot be changed.
●● Sounds are not played when you press the shutter button halfway
or trigger the self-timer.
●● Digest movies are saved as separate movie files in the following
] mode.
cases even if they were recorded on the same day in [
-- The digest movie file size reaches approximately 4 GB, or the
total recording time reaches approximately 29 minutes and
59 seconds.
-- The digest movie is protected (= 72).
-- Daylight saving time (= 17) or time zone (= 115) settings
are changed.
-- A new folder is created (= 119).
●● Recorded shutter sounds cannot be modified or erased.
●● If you prefer to record digest movies without still images, adjust
the setting in advance. Choose MENU (= 25) ► [ ] tab ►
[Digest Type] ► [No Stills] (= 25).
●● Individual chapters can be edited (= 83).
Digest Movie Playback
Display a still image shot in [ ] mode to play the digest movie created
on the same day, or specify the date of the digest movie to play (= 66).
Still Images/Movies
●● If the camera makes no operating sounds, it may have been
turned on while holding down the [ ] button. To activate sounds,
] button, choose [Mute] on the [ ] tab, and
press the [
then press the [ ][ ] buttons to choose [Off].
Still Images
●● A blinking [ ] icon warns that images are more likely to be
blurred by camera shake. In this case, mount the camera on a
tripod or take other measures to keep it still.
●● If your shots are dark despite the flash firing, move closer to the
subject. For details on the flash range, see “Camera” (= 149).
●● The subject may be too close if the camera only beeps once
when you press the shutter button halfway. For details on the
range of focus (shooting range), see “Shooting Range” (= 150).
●● To reduce red-eye and to assist in focusing, the lamp may be lit
when shooting in low-light conditions.
●● A blinking [ ] icon displayed when you attempt to shoot
indicates that shooting is not possible until the flash has finished
recharging. Shooting can resume as soon as the flash is ready,
so either press the shutter button all the way down and wait,
or release it and press it again.
●● Although you can shoot again before the shooting screen
is displayed, your previous shot may determine the focus,
brightness, and colors used.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
●● You can change how long images are displayed after shots
(= 43).
Appendix
Index
31
Movies
●● Before movie recording, lower the flash with your finger. During
recording, keep your fingers away from the microphone. Leaving
the flash raised, or blocking the microphone may prevent audio
from being recorded or may cause the recording to sound muffled.
Before Use
Scene Icons
Still Images
In [ ] and [
] modes, shooting scenes determined by the camera
are indicated by the icon displayed, and corresponding settings are
automatically selected for optimal focusing, subject brightness, and color.
When Shooting People
Background
●● Avoid touching camera controls other than the movie button when
recording movies, because sounds made by the camera will be
recorded.
●● Once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of significant
camera shake. To shoot subjects at the same size shown before
shooting, adjust the image stabilization setting (= 41).
People
In Motion*1
Shadows
on Face*1
Bright
–
Bright and Backlit
With Blue Sky
–
Blue Sky and Backlit
Basic Guide
Advanced Guide
Camera Basics
Icon
Background
Color
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Gray
P Mode
Playback Mode
Light Blue
Wi-Fi Functions
Spotlights
Dark
●● Audio recording is monaural.
Movies
Dark, Using Tripod
Setting Menu
Dark Blue
*2
–
–
Accessories
Appendix
Index
32
When Shooting Other Subjects
Background
Other
Subjects
In Motion*1
At Close
Range
Bright
Icon
Background
Color
Gray
Bright and Backlit
With Blue Sky
Light Blue
Sunsets
–
Orange
Spotlights
Dark
Dark Blue
Dark, Using Tripod
Still Images
Movies
Optimal image stabilization for the shooting conditions is automatically
applied (Intelligent IS). Additionally, the following icons are displayed in
[ ] and [
] modes.
Basic Guide
Advanced Guide
Camera Basics
Image stabilization for still images (Normal)
Blue Sky and
Backlit
*1
*2
Before Use
Image Stabilization Icons
*2
–
–
Not displayed for movies.
Displayed in dark scenes when the camera is held still, as when mounted on a
tripod.
●● Try shooting in [ ] mode (= 53) if the scene icon does not
match actual shooting conditions, or if it is not possible to shoot
with your expected effect, color, or brightness.
Auto Mode /
Hybrid Auto Mode
Image stabilization for still images when panning (Panning)*
Image stabilization for angular camera shake and shift-shake in
macro shots (Hybrid IS).
For movies, [
] is displayed and [ ] image stabilization is also
applied.
Other Shooting Modes
Image stabilization for movies, reducing strong camera shake,
as when recording while walking (Dynamic)
Playback Mode
Image stabilization for slow camera shake, such as when
recording movies at telephoto (Powered)
Wi-Fi Functions
No image stabilization, because the camera is mounted on
a tripod or held still by other means. However, during movie
recording, [ ] is displayed, and image stabilization to counteract
wind or other sources of vibration is used (Tripod IS).
Setting Menu
* Displayed when you pan, following moving subjects with the camera. When you
follow subjects moving horizontally, image stabilization only counteracts vertical
camera shake, and horizontal stabilization stops. Similarly, when you follow
subjects moving vertically, image stabilization only counteracts horizontal camera
shake.
P Mode
Accessories
Appendix
Index
●● To cancel image stabilization, set [IS Mode] to [Off] (= 41).
In this case, an IS icon is not displayed.
] mode, no [
] icon is displayed.
●● In [
33
On-Screen Frames
Before Use
Common, Convenient Features
Still Images
Basic Guide
Movies
In [
] mode, a variety of frames are displayed once the camera
detects subjects you are aiming the camera at.
●● A white frame is displayed around the subject (or person’s face)
determined by the camera to be the main subject, and gray frames are
displayed around other detected faces. Frames follow moving subjects
within a certain range to keep them in focus.
However, if the camera detects subject movement, only the white
frame will remain on the screen.
Still Images
Camera Basics
Movies
When distant subjects are too far away to enlarge using optical zoom, use
digital zoom for up to about 100x enlargement.
1
●● When you are pressing the shutter button halfway and the camera
detects subject movement, a blue frame is displayed, and the focus
and image brightness are constantly adjusted (Servo AF).
●● Try shooting in [ ] mode (= 53) if no frames are displayed, if
frames are not displayed around desired subjects, or if frames are
displayed on the background or similar areas.
Advanced Guide
Zooming In Closer on Subjects (Digital Zoom)
Move the zoom lever toward [
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
].
●● Hold the lever until zooming stops.
P Mode
●● Zooming stops at the largest zoom factor
before the image becomes noticeably
grainy, which is then indicated on the
screen.
(1)
2
Move the zoom lever toward [
again.
Playback Mode
Wi-Fi Functions
]
Setting Menu
●● (1) is the current zoom factor.
Accessories
●● The camera zooms in even closer on the
subject.
Appendix
Index
34
●● Moving the zoom lever will display the zoom bar (which indicates
the zoom position). The zoom bar is color-coded to indicate the
zoom range.
-- White range: optical zoom range where the image will not
appear grainy.
-- Yellow range: digital zoom range where the image is not
noticeably grainy (ZoomPlus).
-- Blue range: digital zoom range where the image will appear
grainy.
●● Because the blue range will not be available at some recording
pixel settings (= 39), the maximum zoom factor can be
achieved by following step 1.
●● To deactivate digital zoom, choose MENU (= 25) ► [
► [Digital Zoom] ► [Off].
] tab
Auto Zooming in Response to Subject Movement
(Auto Zoom)
Still Images
Movies
The camera automatically zooms in and out to keep a detected face
(= 28) at a constant size. If the person moves closer, the camera
automatically zooms out, and vice versa.
1
Enter Auto Zoom mode.
●● Press the [
●● [
] button.
] is displayed.
●● A white frame is displayed around the
detected face, and the camera zooms
in and out to keep the subject on the
screen.
●● When multiple faces are detected, a
white frame is displayed around the main
subject’s face and up to two gray frames
around other faces, as the camera zooms
to keep these subjects on the screen.
2
Before Use
Basic Guide
Advanced Guide
Shoot.
Camera Basics
●● Auto zooming continues even after you
shoot, and the frames are still displayed.
●● Faces may not be detected at some zoom factors, or if the
subject’s head is tilted or facing the camera indirectly.
●● Auto zooming is deactivated in the following situations.
-- When you change the shooting mode
] button, movie button, or [
-- When you press the [
button
-- When [ ] is pressed while the flash is raised
Auto Mode /
Hybrid Auto Mode
]
●● To cancel auto zooming, press the [
button again. [
] is displayed.
Other Shooting Modes
P Mode
Playback Mode
]
●● When a detected subject moves toward the edge of the screen,
the camera zooms out to keep the subject on the screen.
●● The zoom factor cannot be changed after you press the shutter
button all the way down in self-timer mode (= 36).
●● The camera prioritizes zooming to keep subjects on the screen.
For this reason, it may not be possible to maintain a constant
face display size, depending on subject movement and shooting
conditions.
●● When no face is detected, the camera zooms to a certain level
and stops zooming until a face is detected.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
35
Using the Self-Timer to Avoid Camera Shake
Using the Self-Timer
Still Images
Movies
With the self-timer, you can include yourself in group photos or other
timed shots. The camera will shoot about 10 seconds after you press the
shutter button.
1
●● Follow step 1 in “Using the Self-Timer”
(= 36) and choose [ ].
Basic Guide
Advanced Guide
Camera Basics
●● Once the setting is complete, [ ] is
displayed.
Configure the setting.
Auto Mode /
Hybrid Auto Mode
●● Follow step 2 in “Using the Self-Timer”
(= 36) to shoot.
●● Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (= 24).
●● Once the setting is complete, [
displayed.
Before Use
This option delays shutter release until about two seconds after you
have pressed the shutter button. If the camera is unsteady while you are
pressing the shutter button, it will not affect your shot.
Other Shooting Modes
] is
P Mode
Customizing the Self-Timer
Playback Mode
You can specify the delay (0 – 30 seconds) and number of shots (1 – 10).
1
2
Choose [ ].
Wi-Fi Functions
●● Following step 1 in “Using the Self-Timer”
(= 36), choose [ ] and press the
[
] button.
Shoot.
●● For Still Images: Press the shutter button
halfway to focus on the subject, and then
press it all the way down.
2
●● Press the [ ][ ] buttons to choose a
value, and then press the [ ] button.
●● Once you start the self-timer, the lamp
will blink and the camera will play a
self-timer sound.
●● Two seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the flash fires.)
Accessories
Configure the setting.
●● Press the [ ][ ] buttons to choose the
delay time or number of shots.
●● For Movies: Press the movie button.
Setting Menu
●● Once the setting is complete, [
displayed.
Appendix
Index
] is
●● Follow step 2 in “Using the Self-Timer”
(= 36) to shoot.
●● To cancel shooting after you have
triggered the self-timer, press the
[
] button.
●● To restore the original setting, choose [
in step 1.
]
36
●● For movies recorded using the self-timer, recording begins after
your specified delay time, but specifying the number of shots has
no effect.
●● When you specify multiple shots, image brightness and white
balance are determined by the first shot. More time is required
between shots when the flash fires or when you have specified
to take many shots. Shooting will stop automatically when the
memory card becomes full.
●● When a delay longer than two seconds is specified, two seconds
before the shot, the lamp blinking and self-timer sound will speed
up. (The lamp will remain lit in case the flash fires.)
Before Use
Adding a Date Stamp
Still Images
Movies
The camera can add the shooting date to images, in the lower-right corner.
However, note that date stamps cannot be edited or removed, so confirm
beforehand that the date and time are correct (= 17).
1
Basic Guide
Advanced Guide
Camera Basics
Configure the setting.
Auto Mode /
Hybrid Auto Mode
●● Press the [
] button, choose [Date
Stamp ] on the [ ] tab, and then
choose the desired option (= 25).
●● Once the setting is complete, [
displayed.
Other Shooting Modes
] is
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
2
Shoot.
Accessories
●● As you take shots, the camera adds the
shooting date or time to the lower-right
corner of images.
●● To restore the original setting, choose
[Off] in step 1.
Appendix
Index
●● Date stamps cannot be edited or removed.
●● Shots taken without adding a date stamp can be printed with one
as follows.
However, adding a date stamp this way to images that already
have one may cause it to be printed twice.
-- Print using printer functions (= 128)
-- Use camera DPOF print settings (= 131) to print
37
Continuous Shooting
Still Images
Configure the setting.
●● Press the [ ] button, choose [ ] in the
menu, and then choose [ ] (= 24).
●● Once the setting is complete, [
displayed.
Basic Guide
Movies
In [
] mode, hold the shutter button all the way down to shoot
continuously.
For details on the continuous shooting speed, see “Camera” (= 149).
1
Before Use
Image Customization Features
Advanced Guide
Changing the Aspect Ratio
Still Images
Camera Basics
Movies
Change the image aspect ratio (ratio of width to height) as follows.
Auto Mode /
Hybrid Auto Mode
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 24).
] is
Other Shooting Modes
●● Once the setting is complete, the screen
aspect ratio will be updated.
P Mode
●● To restore the original setting, repeat this
process but choose [ ].
Playback Mode
Wi-Fi Functions
2
Setting Menu
Shoot.
●● Hold the shutter button all the way down
to shoot continuously.
●● During continuous shooting, the focus, exposure, and colors are
locked at the position/level determined when you pressed the
shutter button halfway.
●● Cannot be used with the self-timer (= 36).
●● Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
●● As more shots are taken, shooting may slow down.
●● Shooting may slow down if the flash fires.
Accessories
Used for display on widescreen HDTVs or similar display devices.
Same aspect ratio as 35mm film, used for printing images at
5 x 7-inch or postcard sizes.
Appendix
Index
Native aspect ratio of the camera screen. Used for display on
standard-definition televisions or similar display devices. Also
used for printing images at 3.5 x 5-inch or A-series sizes.
Square aspect ratio.
●● Not available in [
] mode.
38
Changing the Number of Recording Pixels
(Image Size)
Still Images
Before Use
Changing Movie Image Quality
Still Images
Movies
Choose the image’s number of recording pixels from 4 levels, as follows.
For guidelines on how many shots at each recording pixel setting can fit
on a memory card, see “Number of Shots per Memory Card” (= 151).
Movies
Three image quality settings are available. For guidelines on the total
recording time for movies at each level of image quality that will fit on a
memory card, see “Recording Time per Memory Card” (= 151).
Basic Guide
Advanced Guide
Camera Basics
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 24).
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(=24).
●● The option you configured is now
displayed.
●● To restore the original setting, repeat this
process but choose [ ].
Auto Mode /
Hybrid Auto Mode
●● The option you configured is now
displayed.
Other Shooting Modes
●● To restore the original setting, repeat this
process but choose [ ].
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Guidelines for Choosing Recording Pixel Setting
Based on Paper Size (for 4:3 Images)
A2 (16.5 x 23.4 in.)
Image
Number of
Quality Recording Pixels
Frame
Rate
Details
1920 x 1080
30 fps
1280 x 720
30 fps
For shooting in HD.
640 x 480
30 fps
For shooting in standard definition.
Accessories
For shooting in Full HD.
Appendix
Index
A3 – A5 (11.7 x 16.5 – 5.8 x 8.3 in.)
3.5 x 5 in., 5 x 7 in., Postcard
For e-mailing and similar purposes
●● Not available in [
●● In [ ] and [ ] modes, black bars displayed on the top and
bottom edges of the screen indicate image areas not recorded.
] mode.
39
Before Use
Magnifying the Area in Focus
Helpful Shooting Features
Still Images
You can check the focus by pressing the shutter button halfway, which will
enlarge the portion of the image in focus in the AF frame.
Displaying Grid Lines
Still Images
Movies
Grid lines can be displayed on the screen for vertical and horizontal
reference while shooting.
●● Press the [
Lines] on the [
[On] (= 25).
Movies
] button, choose [Grid
] tab, and then choose
1
Basic Guide
Advanced Guide
Camera Basics
Configure the setting.
Auto Mode /
Hybrid Auto Mode
●● Press the [
] button, choose
[AF‑Point Zoom] on the [ ] tab, and
then choose [On] (= 25).
Other Shooting Modes
P Mode
●● Once the setting is complete, grid lines
are displayed on the screen.
Playback Mode
●● To restore the original setting, repeat this
process but choose [Off].
Wi-Fi Functions
2
Setting Menu
Check the focus.
Accessories
●● Press the shutter button halfway.
The face detected as the main subject is
now magnified.
●● Grid lines are not recorded in your shots.
●● To restore the original setting, choose
[Off] in step 1.
Appendix
Index
●● The area in focus is not magnified in the following cases when the
shutter button is pressed halfway.
-- If a face was not detected, if the person is too close to the
camera and their face is too large for the screen, or if the
camera detects subject movement
-- When digital zoom is used (= 34)
-- When Tracking AF is used (= 60)
-- When a TV is used as a display (= 124)
] mode.
●● Not available in [
40
Recording Movies with Subjects at the Same Size
Shown before Shooting
Changing the IS Mode Settings
Still Images
Deactivating Image Stabilization
Still Images
Movies
When the camera is held still (as when shooting from a tripod), you should
set image stabilization to [Off] to deactivate it.
1
Access the setting screen.
●● Press the [
] button, choose
[IS Settings] on the [ ] tab, and then
press the [ ] button (= 25).
2
Movies
Normally, once movie recording begins, the image display area changes
and subjects are enlarged to allow for correction of significant camera
shake.
To record movies with subjects at the same size shown before shooting,
you can reduce image stabilization.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● Follow the steps in “Deactivating Image
Stabilization” (= 41) to access the
[IS Settings] screen.
Other Shooting Modes
●● Choose [Dynamic IS], and then choose
[2] (= 25).
P Mode
Configure the setting.
●● Press the [ ][ ] buttons to choose
[IS Mode], and then choose [Off] by
pressing the [ ][ ] buttons.
Continuous
Optimal image stabilization for the shooting conditions is
automatically applied (Intelligent IS) (= 33).
Off
Deactivates image stabilization.
Playback Mode
Wi-Fi Functions
●● You can also set [IS Mode] to [Off], so that subjects are recorded
at the same size shown before shooting.
●● [Dynamic IS] is not available when [IS Mode] is set to [Off]
(= 41).
●● When the movie quality is [ ], Dynamic IS is [1] and cannot be
changed.
Setting Menu
Accessories
Appendix
Index
41
Customize shooting functions on the [ ] tab of the menu screen as
follows.
For instructions on menu functions, see “Using the Menu Screen”
(= 25).
Deactivating the AF-Assist Beam
Still Images
Before Use
Deactivating the Red-Eye Reduction Lamp
Customizing Camera Operation
Movies
You can deactivate the lamp that normally lights up to help you focus
when you press the shutter button halfway in low-light conditions.
●● Press the [
] button, choose
[AF-assist Beam] on the [ ] tab, and
then choose [Off].
Still Images
Movies
You can deactivate the red-eye reduction lamp that lights up to reduce
red-eye when the flash is used in low-light shots.
1
Basic Guide
Advanced Guide
Camera Basics
Access the [Flash Settings] screen.
Auto Mode /
Hybrid Auto Mode
●● Press the [
] button, choose [Flash
Settings] on the [ ] tab, and then press
the [ ] button.
2
Other Shooting Modes
Configure the setting.
P Mode
●● Set [Red-Eye Lamp] to [Off].
●● To restore the original setting, repeat this
process but choose [On].
Playback Mode
Wi-Fi Functions
●● To restore the original setting, repeat this
process but choose [On].
Setting Menu
Accessories
Appendix
Index
42
Changing the Screen Displayed after Shots
Changing the Image Display Style after Shots
Still Images
Change the way images are displayed after shots as follows.
Movies
You can change how long images are displayed and what information is
displayed immediately after shooting.
Changing the Image Display Period after Shots
1
2
Configure the setting.
●● Choose [Display Time], and then choose
the desired option.
●● To restore the original setting, repeat this
process but choose [Quick].
Quick
Displays images only until you can shoot again.
2 sec., 4 sec.,
8 sec.
Displays images for the specified time. Even while
the shot is displayed, you can take another shot by
pressing the shutter button halfway again.
Hold
Displays images until you press the shutter button
halfway.
Off
No image display after shots.
Set [Display Time] to [2 sec.],
[4 sec.], [8 sec.], or [Hold] (= 43).
2
Configure the setting.
Basic Guide
Advanced Guide
Camera Basics
●● Choose [Display Info], and then choose
the desired option.
Access the [Review image after
shooting] screen.
●● Press the [
] button, choose
[Review image after shooting] on the [
tab, and then press the [ ] button.
1
Before Use
Auto Mode /
Hybrid Auto Mode
●● To restore the original setting, repeat this
process but choose [Off].
Other Shooting Modes
]
P Mode
Off
Displays only the image.
Detailed
Displays shooting details (= 141).
Playback Mode
Wi-Fi Functions
●● When [Display Time] (= 43) is set to [Off] or [Quick], [Display
Info] is set to [Off] and cannot be changed.
●● By pressing the [ ] button while an image is displayed after
shooting, you can switch the display information. Note that the
settings of [Display Info] are not changed. By pressing the [ ]
button, you can do the following operations.
-- Protect (= 72)
-- Favorites (= 78)
-- Erase (= 74)
Setting Menu
Accessories
Appendix
Index
43
Enjoying a Variety of Images from
Each Shot (Creative Shot)
Still Images
Other Shooting Modes
Shoot more effectively in various scenes, and take shots enhanced with
unique image effects or captured using special functions
Movies
Before Use
Basic Guide
Advanced Guide
The camera determines the subject and shooting conditions, automatically
applying special effects and recomposing the shot to emphasize the
subject. Six still images are recorded for each shot. You can capture
multiple still images with effects using camera-determined settings.
1
Enter [
Auto Mode /
Hybrid Auto Mode
] mode.
●● Set the mode switch to [
2
Camera Basics
Other Shooting Modes
].
P Mode
Shoot.
Playback Mode
●● Press the shutter button all the way
down. As you shoot, the shutter sound is
played three times.
Wi-Fi Functions
●● After the six images are displayed
in succession, they are displayed
simultaneously for about two seconds.
●● To keep the images displayed until you
press the shutter button halfway, press
the [ ] button. You can choose an image
for full-screen display by pressing the
[ ][ ][ ][ ] buttons, and then press the
[ ] button.
Setting Menu
Accessories
Appendix
Index
●● To return to the original display, press the
] button.
[
●● Shooting will take some time when the flash fires, but hold the
camera steady until the shutter sound is played three times.
●● The six images are managed together as a group (= 69).
●● Simultaneous display of the six images as shown in step 2 is only
available immediately after you shoot.
44
Image Display during Playback
The six images from each shot are managed together as a group, and
only the first image in the series is displayed during playback. To indicate
that the image is part of a group, [
] is displayed in the upper left of
the screen.
Before Use
Choosing Effects
Still Images
You can choose effects for images captured in [
●● After choosing [
button.
Movies
] mode.
] mode, press the [
]
Basic Guide
Advanced Guide
Camera Basics
●● Press the [ ][ ] buttons to choose an
effect, and then press the [ ] button.
●● If you erase a grouped image (= 74), all images in the group
are also erased. Be careful when erasing images.
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
●● Grouped images can be played back individually (= 69) and
ungrouped (= 69).
●● Protecting (= 72) a grouped image will protect all images in
the group.
●● Grouped images can be viewed individually when played back
using Image Search (= 67) or Smart Shuffle (= 71). In this
case, images are temporarily ungrouped.
●● The following actions are not available for grouped images:
magnifying (= 70), tagging as favorites (= 78), editing
(= 79), printing (= 127), setting up individual image printing
(= 131), or adding to a photobook (= 133). To do these
things, either view grouped images individually (= 69) or
cancel grouping (= 69) first.
●● Simultaneous display as shown in step 2 is only available
immediately after you shoot.
P Mode
Auto
All effects
Retro
Images resemble old photos
Playback Mode
Monochrome
Images are generated in one color
Wi-Fi Functions
Special
Bold, distinctive-looking images
Natural
Subdued, natural-looking images
Setting Menu
Accessories
Appendix
Index
45
●● A single image is created by combining
consecutive shots, reducing camera
shake and image noise.
Specific Scenes
Choose a mode matching the shooting scene, and the camera will
automatically configure the settings for optimal shots.
1
Enter [
Still Images
] mode.
●● Set the mode switch to [
2
Shooting under Low Light (Low Light)
Basic Guide
Advanced Guide
Camera Basics
●● Shoot with minimal camera and subject
shake even in low-light conditions.
].
Choose a shooting mode.
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Shooting Fireworks (Fireworks)
●● Press the [ ] button, choose [
] in
the menu, and then choose a shooting
mode (= 24).
3
Movies
Before Use
Still Images
P Mode
Movies
●● Vivid shots of fireworks.
Playback Mode
Shoot.
Wi-Fi Functions
Setting Menu
Shooting Portraits (Portrait)
Still Images
Movies
●● Take shots of people with a softening
effect.
hooting Evening Scenes
S
without Using a Tripod
(Handheld Night Scene)
Still Images
Movies
●● Beautiful shots of evening scenes or
portraits with evening scenery in the
background, without the need to hold the
camera very still (as with a tripod).
●● Subjects appear larger in [ ] mode compared to other modes.
●● In [ ] mode, shots may look grainy because the ISO speed
(= 55) is increased to suit the shooting conditions.
●● Because the camera will shoot continuously in [ ] mode, hold it
steady while shooting.
●● In [ ] mode, excessive motion blur or certain shooting conditions
may prevent you from obtaining the desired results.
●● In [ ] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
means to secure the camera (= 41).
Accessories
Appendix
Index
●● When you use a tripod for evening scenes, shooting in [
]
mode instead of [ ] mode will give better results (= 28).
●● [ ] mode recording pixel setting is [ ] (2592 x 1944) and cannot
be changed.
●● In [ ] mode, although no frames are displayed when you press
the shutter button halfway, optimal focus is still determined.
46
Add a variety of effects to images when shooting.
1
Still Images
Choose a shooting mode.
●● Follow steps 1 – 2 in “Specific Scenes”
(= 46) to choose a shooting mode.
2
Before Use
Shooting with a Fish-Eye Lens Effect
(Fish-Eye Effect)
Applying Special Effects
Basic Guide
Movies
Advanced Guide
Shoot with the distorting effect of a fish-eye lens.
1
Choose [
Camera Basics
].
Auto Mode /
Hybrid Auto Mode
●● Follow steps 1 – 2 in “Specific Scenes”
(= 46) and choose [ ].
Shoot.
Shooting in Vivid Colors (Super Vivid)
Still Images
Movies
●● Shots in rich, vivid colors.
2
Other Shooting Modes
Choose an effect level.
P Mode
●● Press the [ ] button, press the [ ][ ]
buttons to choose an effect level, and
then press the [ ] button.
Playback Mode
●● A preview is shown of how your shot will
look with the effect applied.
Posterized Shots (Poster Effect)
Still Images
Movies
●● Shots that resemble an old poster or
illustration.
3
Wi-Fi Functions
Shoot.
Setting Menu
Accessories
●● Try taking some test shots first, to make sure you obtain the
desired results.
Appendix
Index
●● In [ ] and [ ] modes, try taking some test shots first, to make
sure you obtain the desired results.
47
Playback Speed and Estimated Playback Time
(for One-Minute Clips)
Shots Resembling Miniature Models
(Miniature Effect)
Still Images
Speed
Movies
Creates the effect of a miniature model, by blurring image areas above
and below your selected area.
You can also make movies that look like scenes in miniature models by
choosing the playback speed before the movie is recorded. People and
objects in the scene will move quickly during playback. Note that sound is
not recorded.
1
Choose [
].
●● Follow steps 1 – 2 in “Specific Scenes”
(= 46) and choose [ ].
●● A white frame is displayed, indicating the
image area that will not be blurred.
2
Choose the area to keep in focus.
●● Press the [
] button.
●● Move the zoom lever to resize the frame,
and press the [ ][ ] buttons to move it.
3
For movies, choose the movie
playback speed.
Playback Time
Approx. 12 sec.
Before Use
Basic Guide
Advanced Guide
Approx. 6 sec.
Camera Basics
Approx. 3 sec.
Auto Mode /
Hybrid Auto Mode
Movies are played back at 30 fps.
Other Shooting Modes
●● The zoom is not available when shooting movies. Be sure to set
the zoom before shooting.
●● Try taking some test shots first, to make sure you obtain the
desired results.
●● To switch the orientation of the frame to vertical, press the [ ][ ]
buttons in step 2. To return the frame to horizontal orientation,
press the [ ][ ] buttons.
●● To move the frame when it is in horizontal orientation, press the
[ ][ ] buttons, and to move the frame when it is in vertical
orientation, press the [ ][ ] buttons.
●● Holding the camera vertically will change the orientation of the
frame.
] and [ ] at
●● Movie image quality is [ ] at an aspect ratio of [
] (= 38). These quality settings cannot
an aspect ratio of [
be changed.
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
●● Press the [
] button, and then
press the [ ][ ] buttons to choose the
speed.
4
Return to the shooting screen and
shoot.
●● Press the [
] button to return to the
shooting screen, and then shoot.
48
Shooting with a Toy Camera Effect
(Toy Camera Effect)
Still Images
Still Images
Movies
Choose [
1
].
2
Choose a color tone.
Standard
Shots resemble toy camera images.
Warm
Images have a warmer tone than with [Standard].
Cool
Images have a cooler tone than with [Standard].
].
Camera Basics
Auto Mode /
Hybrid Auto Mode
Choose a color tone.
Other Shooting Modes
P Mode
●● A preview is shown of how your shot will
look with the effect applied.
3
●● A preview is shown of how your shot will
look with the effect applied.
Shoot.
Advanced Guide
●● Press the [ ] button, press the [ ][ ]
buttons to choose a color tone, and then
press the [ ] button.
●● Press the [ ] button, press the [ ][ ]
buttons to choose a color tone, and then
press the [ ] button.
3
Choose [
Basic Guide
●● Follow steps 1 – 2 in “Specific Scenes”
(= 46) and choose [ ].
●● Follow steps 1 – 2 in “Specific Scenes”
(= 46) and choose [
].
2
Movies
Shoot images in black and white, sepia, or blue and white.
This effect makes images resemble shots from a toy camera by vignetting
(darker, blurred image corners) and changing the overall color.
1
Before Use
Shooting in Monochrome
Playback Mode
Wi-Fi Functions
Shoot.
B/W
Black and white shots.
Sepia
Sepia tone shots.
Blue
Blue and white shots.
Setting Menu
Accessories
Appendix
Index
●● Try taking some test shots first, to make sure you obtain the
desired results.
49
Special Modes for Other Purposes
Auto Shooting after Face Detection
(Smart Shutter)
Still Images
Movies
Auto Shooting after Smile Detection (Smile)
The camera shoots automatically after detecting a smile, even without you
pressing the shutter button.
1
Choose [
].
●● Follow steps 1 – 2 in “Specific Scenes”
(= 46) and choose [ ], and then
press the [ ] button.
●● Press the [ ][ ] buttons to choose [
and then press the [ ] button.
],
●● The camera now enters shooting standby
mode, and [Smile Detection on] is
displayed.
2
Before Use
●● You can also shoot as usual by pressing the shutter button.
●● The camera can detect smiles more easily when subjects face
the camera and open their mouth wide enough so that teeth are
visible.
●● To change the number of shots, press the [ ][ ] buttons after
choosing [ ] in step 1.
Aim the camera at a person.
●● Each time the camera detects a smile,
it will shoot after the lamp lights up.
●● To pause smile detection, press the
[ ] button. Press the [ ] button again to
resume detection.
●● Switch to another mode when you finish shooting, or the camera
will continue shooting each time a smile is detected.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Auto Shooting after Wink Detection (Wink Self-Timer)
Aim the camera at a person and press the shutter button all the way
down. The camera will shoot about two seconds after a wink is detected.
1
Choose [
Other Shooting Modes
].
P Mode
●● Follow steps 1 – 2 in “Specific Scenes”
(= 46) and choose [ ], and then
press the [ ] button.
●● Press the [ ][ ] buttons to choose [
and then press the [ ] button.
2
Wi-Fi Functions
],
Setting Menu
Compose the shot and press the
shutter button halfway.
●● Make sure a green frame is displayed
around the face of the person who will
wink.
3
Playback Mode
Press the shutter button all the way
down.
Accessories
Appendix
Index
●● The camera now enters shooting standby
mode, and [Wink to take picture] is
displayed.
●● The lamp blinks and the self-timer sound
is played.
50
4
2
Face the camera and wink.
●● The camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
●● To cancel shooting after you have
triggered the self-timer, press the
] button.
[
Auto Shooting after Detecting New Person
(Face Self-Timer)
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
(= 59). This is useful when including yourself in group photos or similar
shots.
Choose [
Before Use
●● Make sure a green frame is displayed
around the face you focus on and white
frames around other faces.
Basic Guide
3
●● If the wink is not detected, wink again slowly and deliberately.
●● Winking may not be detected if eyes are obscured by hair, a hat,
or glasses.
●● Closing and opening both eyes at once will also be detected as
a wink.
●● If winking is not detected, the camera will shoot about 15 seconds
later.
●● To change the number of shots, press the [ ][ ] buttons after
choosing [ ] in step 1.
●● If no one is in the shooting area when the shutter button is
pressed all the way down, the camera will shoot after a person
enters the shooting area and winks.
1
Compose the shot and press the
shutter button halfway.
].
Advanced Guide
Press the shutter button all the way
down.
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● The camera now enters shooting standby
mode, and [Look straight at camera to
start count down] is displayed.
Other Shooting Modes
●● The lamp blinks and the self-timer sound
is played.
4
P Mode
Join the subjects in the shooting
area and look at the camera.
Playback Mode
Wi-Fi Functions
●● After the camera detects a new face, the
lamp blinking and self-timer sound will
speed up. (When the flash fires, the lamp
will remain lit.) About two seconds later,
the camera will shoot.
Setting Menu
Accessories
●● To cancel shooting after you have
triggered the self-timer, press the
] button.
[
Appendix
Index
●● Even if your face is not detected after you join the others in the
shooting area, the camera will shoot about 15 seconds later.
●● To change the number of shots, press the [ ][ ] buttons after
choosing [ ] in step 1.
●● Follow steps 1 – 2 in “Specific Scenes”
(= 46) and choose [ ], and then
press the [ ] button.
●● Press the [ ][ ] buttons to choose [
and then press the [ ] button.
],
51
Shooting Long Exposures (Long Shutter)
Still Images
Movies
Specify a shutter speed of 1 – 15 seconds to shoot long exposures. In this
case, mount the camera on a tripod or take other measures to prevent
camera shake.
1
Choose [ ].
●● Follow steps 1 – 2 in “Specific Scenes”
(= 46) and choose [ ].
●● If the flash fires, your shot may be overexposed. In this case, set
the flash to [ ] and shoot again (= 62).
Choose the shutter speed.
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired shutter
speed (= 24).
3
Check the exposure.
●● Press the shutter button halfway to view
the exposure for your selected shutter
speed.
4
Shoot.
●● On-screen image brightness in step 3, when you pressed the
shutter button halfway, may not match the brightness of your
shots.
●● With shutter speeds of 1.3 seconds or slower, there will be a
delay before you can shoot again, as the camera processes
images to reduce noise.
●● Set [IS Mode] to [Off] when using a tripod or other means to
secure the camera (= 41).
Basic Guide
Advanced Guide
High-Speed Continuous Shooting
(High-Speed Burst)
Camera Basics
Still Images
Auto Mode /
Hybrid Auto Mode
Movies
You can shoot a series of shots in rapid succession by holding the shutter
button all the way down. For details on the continuous shooting speed,
see “Camera” (= 149).
1
2
Before Use
Other Shooting Modes
P Mode
Choose [ ].
Playback Mode
●● Follow steps 1 – 2 in “Specific Scenes”
(= 46) and choose [ ].
Wi-Fi Functions
Setting Menu
2
Shoot.
Accessories
●● Hold the shutter button all the way down
to shoot continuously.
●● Recording pixel setting is [ ] (2592 x 1944) and cannot be
changed.
●● Focus, image brightness, and color are determined by the first
shot.
●● Shooting may stop momentarily or continuous shooting may slow
down depending on shooting conditions, camera settings, and the
zoom position.
●● As more shots are taken, shooting may slow down.
Appendix
Index
52
Shooting in Program AE ([P] Mode)
Still Images
Movies
You can customize many function settings to suit your preferred shooting
style.
1
P Mode
Basic Guide
Advanced Guide
Camera Basics
Enter [ ] mode.
Auto Mode /
Hybrid Auto Mode
●● Follow steps 1 – 2 in “Specific Scenes”
(= 46) and choose [ ].
2
More discerning shots, in your preferred shooting style
●● Instructions in this chapter apply when the mode switch set to [
mode to [ ].
Before Use
] and
●● [ ]: Program AE; AE: Auto Exposure
●● Before using a function introduced in this chapter in modes other than
[ ], make sure the function is available in that mode (= 142).
Other Shooting Modes
Customize the settings as desired
(= 54 – = 63), and then shoot.
P Mode
Playback Mode
●● If the optimum exposure cannot be obtained when you press the
shutter button halfway, the shutter speed and aperture value are
displayed in orange. In this case, try adjusting the ISO speed
(= 55) or activating the flash (if subjects are dark, = 62),
which may enable optimum exposure.
●● Movies can be recorded in [ ] mode as well, by pressing the
movie button. However, some FUNC. (= 24) and MENU
(= 25) settings may be automatically adjusted for movie
recording.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
53
Before Use
Changing the Metering Method
Image Brightness (Exposure)
Still Images
Movies
Adjust the metering method (how brightness is measured) to suit shooting
conditions as follows.
Adjusting Image Brightness
(Exposure Compensation)
Still Images
Movies
●● When shooting movies, shoot with the
exposure compensation bar displayed.
●● When shooting still images, press the
[ ] button to display the set exposure
compensation amount, and then shoot.
●● You can also shoot still images with exposure compensation bar
displayed.
] is displayed, and the exposure is
●● While recording a movie, [
locked.
Advanced Guide
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 24).
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● The option you configured is now
displayed.
The standard exposure set by the camera can be adjusted in 1/3-stop
increments, in a range of –2 to +2.
●● Press the [ ] button and choose [ ]
in the menu. As you watch the screen,
press the [ ][ ] buttons to adjust
brightness (= 24).
Basic Guide
Other Shooting Modes
P Mode
Evaluative
For typical shooting conditions, including backlit
shots. Automatically adjusts exposure to match the
shooting conditions.
Center
Weighted Avg.
Determines the average brightness of light across
the entire image area, calculated by treating
brightness in the central area as more important.
Spot
Metering restricted to within the [ ] (Spot AE
Point frame), displayed in the center of the screen.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
54
Changing the ISO Speed
Before Use
Correcting Image Brightness (i-Contrast)
Still Images
Movies
Set the ISO speed to [AUTO] for automatic adjustment to suit the shooting
mode and conditions. Otherwise, set a higher ISO speed for higher
sensitivity, or a lower value for lower sensitivity.
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 24).
●● The option you configured is now
displayed.
●● To view the automatically determined ISO speed when you have
set the ISO speed to [AUTO], press the shutter button halfway.
●● Although choosing a lower ISO speed may reduce image
graininess, there may be a greater risk of subject and camera
shake in some shooting conditions.
●● The faster shutter speed used at higher ISO speeds reduces
subject and camera shake and increases the flash range.
However, shots may look grainy.
Still Images
Movies
Before shooting, excessively bright or dark image areas (such as faces or
backgrounds) can be detected and automatically adjusted to the optimal
brightness. Insufficient overall image contrast can also be automatically
corrected before shooting to make subjects stand out better.
Basic Guide
Advanced Guide
Camera Basics
●● Press the [
] button, choose
[i-Contrast] on the [ ] tab, and then
choose [Auto] (= 25).
●● Once the setting is complete, [
displayed.
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
] is
P Mode
Playback Mode
●● Under some shooting conditions, correction may be inaccurate or
may cause images to appear grainy.
Wi-Fi Functions
Setting Menu
●● You can also correct existing images (= 81).
Accessories
Appendix
Index
55
Custom White Balance
Image Colors
Adjusting White Balance
●● Follow the steps in “Adjusting White
Balance” (= 56) to choose [ ].
Still Images
Movies
By adjusting white balance (WB), you can make image colors look more
natural for the scene you are shooting.
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(=24).
●● The option you configured is now
displayed.
Auto
Automatically sets the optimal white balance for
the shooting conditions.
Day Light
For shooting outdoors in fair weather.
Cloudy
For shooting in cloudy weather or at twilight.
Tungsten
For shooting under ordinary incandescent lighting.
Fluorescent
For shooting under white fluorescent lighting.
Fluorescent H For shooting under daylight fluorescent lighting.
Custom
Before Use
For image colors that look natural under the light in your shot, adjust white
balance to suit the light source where you are shooting. Set the white
balance under the same light source that will illuminate your shot.
For manually setting a custom white balance
(= 56).
Basic Guide
Advanced Guide
Camera Basics
●● Aim the camera at a plain white subject,
so that the entire screen is white. Press
] button.
the [
Auto Mode /
Hybrid Auto Mode
●● The tint of the screen changes once the
white balance data has been recorded.
Other Shooting Modes
P Mode
●● Colors may look unnatural if you change camera settings after
recording white balance data.
Playback Mode
Wi-Fi Functions
Changing Image Color Tones (My Colors)
Still Images
Setting Menu
Movies
Accessories
Change image color tones as desired, such as converting images to sepia
or black and white.
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(=24).
Appendix
Index
●● The option you configured is now
displayed.
56
–
My Colors Off
Vivid
Emphasizes contrast and color saturation,
making images sharper.
Neutral
Tones down contrast and color saturation for
subdued images.
Sepia
Creates sepia tone images.
B/W
Creates black and white images.
Positive Film
Combines the effects of Vivid Blue, Vivid
Green, and Vivid Red to produce intense yet
natural-looking colors resembling images on
positive film.
Lighter Skin Tone
Lightens skin tones.
Darker Skin Tone
Darkens skin tones.
Vivid Blue
Emphasizes blues in images. Makes the sky,
ocean, and other blue subjects more vivid.
Vivid Green
Emphasizes greens in images. Makes
mountains, foliage, and other green subjects
more vivid.
Vivid Red
Emphasizes reds in images. Makes red
subjects more vivid.
Custom Color
Adjust contrast, sharpness, color saturation,
and other qualities as desired (= 57).
Custom Color
Before Use
Choose the desired level of image contrast, sharpness, color saturation,
red, green, blue, and skin tones in a range of 1 – 5.
1
Access the setting screen.
●● Follow the steps in “Changing Image
Color Tones (My Colors)” (= 56) to
choose [ ], and then press the [
button.
2
Basic Guide
Advanced Guide
Camera Basics
]
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Configure the setting.
P Mode
●● Press the [ ][ ] buttons to choose
an item, and then specify the value by
pressing the [ ][ ] buttons.
Playback Mode
●● For stronger/more intense effects (or
darker skin tones), adjust the value to
the right, and for weaker/lighter effects
(or lighter skin tones), adjust the value to
the left.
●● Press the [
the setting.
Wi-Fi Functions
Setting Menu
Accessories
] button to complete
Appendix
Index
●● White balance (= 56) cannot be set in [ ] or [ ] modes.
●● With [ ] and [ ] modes, colors other than people’s skin tone
may change. These settings may not produce the expected
results with some skin tones.
57
Before Use
Shooting Distant Subjects (Infinity)
Shooting Range and Focusing
Still Images
To restrict the focus to distant subjects, set the camera to [
on the range of focus, see “Shooting Range” (= 150).
Shooting Close-Ups (Macro)
Still Images
Movies
To restrict the focus to subjects at close range, set the camera to [ ].
For details on the range of focus, see “Shooting Range” (= 150).
●● Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press the
[ ] button.
Movies
]. For details
Basic Guide
Advanced Guide
●● Press the [ ] button, press the [ ][ ]
buttons to choose [ ], and then press
the [ ] button.
●● Once the setting is complete, [
displayed.
Camera Basics
Auto Mode /
Hybrid Auto Mode
] is
Other Shooting Modes
P Mode
●● Once the setting is complete, [ ] is
displayed.
Playback Mode
Wi-Fi Functions
●● If the flash fires, vignetting may occur.
●● In the yellow bar display area below the zoom bar, [
gray and the camera will not focus.
Setting Menu
] will turn
Accessories
Appendix
●● To prevent camera shake, try mounting the camera on a tripod
and shooting with the camera set to [ ] (= 36).
Index
58
Digital Tele-Converter
Before Use
Changing the AF Frame Mode
Still Images
Movies
The focal length of the lens can be increased by approximately 1.6x or
2.0x. This can reduce camera shake because the shutter speed is faster
than it would be if you zoomed (including using digital zoom) in to the
same zoom factor.
Change the AF (auto focus) frame mode to suit the shooting conditions as
follows.
●● Press the [
] button, choose [AF
Frame] on the [ ] tab, and then choose
the desired option (= 25).
Basic Guide
Advanced Guide
Camera Basics
●● Press the [
] button, choose
[Digital Zoom] on the [ ] tab, and then
choose the desired option (= 25).
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
●● The view is enlarged and the zoom factor
is displayed on the screen.
P Mode
Face AiAF
Still Images
●● The digital tele-converter cannot be used with digital zoom
(= 34) or AF-point zoom (= 40).
●● The shutter speed may be equivalent when you move the zoom
] for maximum telephoto, and when
lever all the way toward [
you zoom in to enlarge the subject to the same size following
step 2 in “Zooming In Closer on Subjects (Digital Zoom)”
(= 34).
Playback Mode
Movies
●● Detects people’s faces, and then sets the focus, exposure (evaluative
metering only), and white balance ([ ] only).
Wi-Fi Functions
●● After you aim the camera at the subject, a white frame is displayed
around the person’s face determined by the camera to be the main
subject, and up to two gray frames are displayed around other
detected faces.
Setting Menu
●● When the camera detects movement, frames will follow moving
subjects, within a certain range.
Appendix
●● After you press the shutter button halfway, up to nine green frames are
displayed around faces in focus.
Accessories
Index
59
●● If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in
the areas in focus when you press the shutter button halfway.
●● If faces are not detected when Servo AF (= 61) is set to [On],
the AF frame is displayed in the center of the screen when you
press the shutter button halfway.
●● Examples of faces that cannot be detected:
-- Subjects that are distant or extremely close
-- Subjects that are dark or light
-- Faces in profile, at an angle, or partly hidden
●● The camera may misinterpret non-human subjects as faces.
●● No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Movies
Shoot after choosing a subject to focus on as follows.
1
Choose [Tracking AF].
●● Follow the steps in “Changing the AF
Frame Mode” (= 59) to choose
[Tracking AF].
●● [ ] is displayed in the center of the
screen.
Choose a subject to focus on.
●● Aim the camera so that [ ] is on the
desired subject, and then press the [ ]
button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● When the subject is detected, the camera
beeps and [ ] is displayed. Even if the
subject moves, the camera will continue
to track the subject within a certain range.
●● If no subject is detected, [
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
] is displayed.
●● To cancel tracking, press the [ ] button
again.
3
Choosing Subjects to Focus On (Tracking AF)
Still Images
2
P Mode
Playback Mode
Shoot.
●● Press the shutter button halfway. [ ]
changes to a blue [ ], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
(= 61).
Wi-Fi Functions
Setting Menu
Accessories
●● Press the shutter button all the way down
to shoot.
●● Even after your shot, [ ] is still displayed
and the camera continues to track the
subject.
Appendix
Index
●● [Servo AF] (= 61) is set to [On] and cannot be changed.
●● Tracking may not be possible when subjects are too small or
move too rapidly, or when subject color or brightness matches
that of the background too closely.
●● [AF-Point Zoom] on the [ ] tab (= 25) is not available.
●● [ ] and [ ] are not available.
●● The camera can detect subjects even if you press the shutter
button halfway without pressing the [ ] button. After your shot,
[ ] is displayed in the center of the screen.
60
Center
Shooting with Servo AF
Still Images
Movies
One AF frame is displayed in the center. Effective for reliable focusing.
●● A yellow AF frame is displayed with [ ] if the camera cannot
focus when you press the shutter button halfway.
●● To reduce the AF frame size, press the [
] button and set
[AF Frame Size] on the [ ] tab to [Small] (= 25).
●● The AF frame size is set to [Normal] when you use the digital
zoom (= 34) or digital tele-converter (= 59).
●● To compose shots so that subjects are positioned at the edge or
in a corner, first aim the camera to capture the subject in an AF
frame, and then hold the shutter button halfway down. As you
continue to hold the shutter button halfway, recompose the shot
as desired, and then press the shutter button all the way down
(Focus Lock).
●● The AF frame position is enlarged when you press the shutter
button halfway with [AF-Point Zoom] (= 40) set to [On].
Before Use
Still Images
Movies
This mode helps avoid missing shots of subjects in motion, because the
camera continues to focus on the subject and adjust the exposure as long
as you press the shutter button halfway.
1
Advanced Guide
Configure the setting.
●● Press the [
AF] on the [
(= 25).
2
Basic Guide
Camera Basics
] button, choose [Servo
] tab, and then choose [On]
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Focus.
P Mode
●● The focus and exposure are maintained
where the blue AF frame is displayed
while you are pressing the shutter button
halfway.
Playback Mode
Wi-Fi Functions
●● Focusing may not be possible in some shooting conditions.
●● In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway.
In this case, the focus and exposure are set according to the
specified AF frame mode.
●● If optimum exposure cannot be obtained, the shutter speed and
aperture value are displayed in orange. Release the shutter
button, and then press it halfway again.
●● [AF-Point Zoom] on the [ ] tab (= 25) is not available.
●● Not available when using the self-timer (= 36).
Setting Menu
Accessories
Appendix
Index
61
Changing the Focus Setting
Before Use
Flash
Still Images
Basic Guide
Movies
You can change default camera operation of constantly focusing on
subjects it is aimed at, even when the shutter button is not pressed.
Instead, you can limit camera focusing to the moment you press the
shutter button halfway.
●● Press the [
] button, choose
[Continuous AF] on the [ ] tab, and then
choose [Off] (= 25).
Advanced Guide
Changing the Flash Mode
Still Images
Camera Basics
Movies
You can change the flash mode to match the shooting scene. For details
on the flash range, see “Camera” (= 149).
1
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Raise the flash.
●● Move the [ ] switch.
2
On
Off
Helps avoid missing sudden photo opportunities, because
the camera constantly focuses on subjects until you press the
shutter button halfway.
Conserves battery power, because the camera does not focus
constantly.
P Mode
Configure the setting.
Playback Mode
●● Press the [ ] button, press the [ ][ ]
buttons to choose a flash mode, and then
press the [ ] button.
Wi-Fi Functions
●● The option you configured is now
displayed.
Setting Menu
Accessories
●● The setting screen cannot be accessed by pressing the [ ] button
when the flash is lowered. Move the [ ] switch to raise the flash,
then configure the setting.
Appendix
Index
62
Auto
Fires automatically in low-light conditions.
Before Use
Other Settings
Basic Guide
On
Fires for each shot.
Changing the Compression Ratio (Image Quality)
Slow Synchro
Fires to illuminate the main subject (such as people) while shooting at a
slower shutter speed to illuminate backgrounds out of flash range.
●● In [ ] mode, mount the camera on a tripod or take other
measures to keep it still and prevent camera shake. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other
means to secure the camera (= 41).
●● In [ ] mode, even after the flash fires, ensure that the main
subject does not move until the shutter sound is finished playing.
Off
For shooting without the flash.
●● A blinking [ ] icon may be displayed when you press the shutter
button halfway in camera-shake inducing, low-light conditions. In
this case, mount the camera on a tripod or take other measures
to keep it still.
Still Images
Advanced Guide
Camera Basics
Movies
Choose from two compression ratios, [ ] (Super Fine) and [ ] (Fine), as
follows. For guidelines on how many shots at each compression ratio can
fit on a memory card, see “Number of Shots per Memory Card” (= 151).
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(=24).
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Changing the IS Mode Settings
Accessories
Still Images
Movies
●● Follow steps 1 – 2 in “Deactivating Image
Stabilization” (= 41) and choose
[Shoot Only].
Appendix
Index
●● If image stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hold it still. In this
case, set [IS Mode] to [Off].
●● The setting is changed to [Continuous] for movie recording.
63
Before Use
Viewing
Still Images
Movies
After shooting images or movies, you can view them on the screen as
follows.
1
Playback Mode
Basic Guide
Advanced Guide
Camera Basics
Enter Playback mode.
●● Press the [
Auto Mode /
Hybrid Auto Mode
] button.
●● Your last shot is displayed.
Other Shooting Modes
Have fun reviewing your shots, and browse or edit them in many ways
●● To prepare the camera for these operations, press the [
enter Playback mode.
] button to
●● It may not be possible to play back or edit images that were
renamed or already edited on a computer, or images from other
cameras.
2
Choose images.
P Mode
●● To view the previous image, press the [ ]
button. To view the next image, press the
[ ] button.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●● To access this screen (Scroll Display
mode), press and hold the [ ][ ] buttons
for at least one second. In this mode,
press the [ ][ ] buttons to browse
through images.
Index
●● To return to single-image display, press
the [ ] button.
●● To browse images grouped by shooting
date, press the [ ][ ] buttons in Scroll
Display mode.
64
●● Movies are identified by a [
To play movies, go to step 3.
3
] icon.
Play movies.
●● To start playback, press the [ ] button,
press the [ ][ ] buttons to choose [ ],
and then press the [ ] button again.
●● To switch to Shooting mode from Playback mode, press the
shutter button halfway.
] tab
●● To deactivate Scroll Display, choose MENU (= 25) ► [
► [Scroll Display] ► [Off].
●● To have the most recent shot displayed when you enter Playback
] tab ► [Resume] ► [Last
mode, choose MENU (= 25) ► [
shot].
●● To change the transition shown between images, access MENU
] tab ►
(= 25) and choose your desired effect on the [
[Transition].
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Switching Display Modes
4
Still Images
Adjust the volume.
●● Press the [
volume.
][
P Mode
] buttons to adjust the
●● To adjust the volume when the volume
indicator (1) is no longer displayed, press
the [ ][ ] buttons.
Playback Mode
Movies
Press the [ ] button to view other information on the screen, or to hide
the information. For details on the information displayed, see “Playback
(Detailed Information Display)” (= 141).
Wi-Fi Functions
Setting Menu
Accessories
No Information Display
(1)
Appendix
5
Pause playback.
●● To pause or resume playback, press the
[ ] button.
●● After the movie is finished, [
displayed.
Simple Information Display
Index
] is
Detailed Information Display
65
Overexposure Warning (for Image Highlights)
Washed-out highlights in the image flash on the screen in detailed
information display (= 65).
Histogram
Still Images
●● The graph in detailed information display
(= 65) is a histogram showing the
distribution of brightness in the image.
The horizontal axis represents the degree
of brightness, and the vertical axis, how
much of the image is at each level of
brightness. Viewing the histogram is a
way to check exposure.
GPS Information Display
●● Using a smartphone connected to the
camera via Wi-Fi, you can geotag images
on the camera, adding information such
as latitude, longitude, and elevation
(= 110). You can review this information
in the GPS information display.
●● Latitude, longitude, elevation, and UTC
(shooting date and time) are listed from
top to bottom.
●● GPS information display is not available for images that lack this
information.
●● [---] is shown instead of numerical values for items not available
on your smartphone or items not recorded correctly.
Before Use
Viewing Short Movies Created When Shooting
Still Images (Digest Movies)
View digest movies recorded automatically in [
day of still image shooting as follows.
1
Basic Guide
Movies
] mode (= 30) on a
Advanced Guide
Camera Basics
Choose an image.
Auto Mode /
Hybrid Auto Mode
●● Still images shot in [ ] mode are
labeled with [
] icon.
Other Shooting Modes
P Mode
2
Playback Mode
Play the digest movie.
Wi-Fi Functions
●● Press the [ ] button, and then choose
[ ] in the menu (= 24).
Setting Menu
●● The digest movie recorded automatically
on the day of still image shooting is
played back from the beginning.
Accessories
Appendix
●● After a moment, [
] will no longer be displayed when
you are using the camera with information display deactivated
(= 65).
Index
●● UTC: Coordinated Universal Time, essentially the same as
Greenwich Mean Time
66
Viewing by Date
1
Basic Guide
Choose a movie.
●● Press the [
] button, choose [List/
Play Digest Movies] on the [
] tab, and
then choose a date (= 25).
2
Before Use
Browsing and Filtering Images
Digest movies can be viewed by date.
Advanced Guide
Navigating through Images in an Index
Still Images
Camera Basics
Movies
By displaying multiple images in an index, you can quickly find the images
you are looking for.
Play the movie.
●● Press the [
] button to start playback.
1
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Display images in an index.
●● Move the zoom lever toward [ ] to
display images in an index. Moving the
lever again will increase the number of
images shown.
P Mode
Playback Mode
●● To display fewer images, move the zoom
lever toward [ ]. Fewer images are
shown each time you move the lever.
2
Wi-Fi Functions
Setting Menu
Choose an image.
●● Press the [
an image.
][
Accessories
][ ][ ] buttons to choose
●● An orange frame is displayed around the
selected image.
●● Press the [ ] button to view the selected
image in single-image display.
Appendix
Index
67
Finding Images Matching Specified Conditions
Still Images
Movies
Find desired images quickly on a memory card full of images by filtering
image display according to your specified conditions. You can also protect
(= 72) or delete (= 74) these images all at once.
People
Displays images with detected faces.
Shot Date
Displays the images shot on a specific date.
Favorites
Displays images tagged as favorites (= 78).
Still image/Movie
Displays still images, movies, or movies shot in
[ ] mode (= 30).
1
●● To show or hide information, press the [ ] button in step 2.
●● Options for viewing the images found (in step 2) include
“Navigating through Images in an Index” (= 67), “Magnifying
Images” (= 70), and “Viewing Slideshows” (= 70). You
can protect, erase, or print all images found or add them to
a photobook by choosing [Select All Images in Search] in
“Protecting Images” (= 72), “Erasing Multiple Images at Once”
(= 75), “Adding Images to the Print List (DPOF)” (= 131), or
“Adding Images to a Photobook” (= 133).
●● If you edit images and save them as new images (= 79 –
= 83), a message is displayed, and the images that were
found are no longer shown.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Choose a search condition.
●● Press the [ ] button, choose [ ] in the
menu, and choose a condition (= 24).
Wi-Fi Functions
●● When you have selected [ ] or [ ],
choose the condition by pressing the
[ ][ ][ ][ ] buttons on the screen
displayed, and then press the [ ] button.
Setting Menu
2
Accessories
Appendix
View the filtered images.
●● Images matching your conditions are
displayed in yellow frames. To view only
these images, press the [ ][ ] buttons.
●● To cancel filtered display, choose [
step 1.
Index
] in
●● When the camera has found no corresponding images for some
conditions, those conditions will not be available.
68
Viewing Individual Images in a Group
Still Images
Movies
Images shot in [
] or [ ] mode (= 44, = 52) are grouped for
display, and these grouped images can be viewed one at a time.
1
Choose a grouped image.
●● Press the [ ][ ] buttons to choose an
image labeled with [
].
2
Choose [
].
●● Press the [ ] button, and then choose
[ ] in the menu (= 24).
●● During group playback (step 3), you can use the menu functions
accessed by pressing the [ ] button. You can also browse
through images quickly “Navigating through Images in an Index”
(= 67) and magnify them “Magnifying Images” (= 70).
By choosing [All Images in Group] for “Protecting Images”
(= 72), “Erasing Multiple Images at Once” (= 75), “Adding
Images to the Print List (DPOF)” (= 131), or “Adding Images
to a Photobook” (= 133), all images in the group can be
manipulated at once.
●● To ungroup images so that they are displayed only as single
] tab ► [Group
still images, choose MENU (= 25) ► [
Images] ► [Off] (= 25). However, grouped images cannot be
ungrouped during individual playback.
] mode, the simultaneous display after step 2 in “Enjoying
●● In [
a Variety of Images from Each Shot (Creative Shot)” (= 44) is
only shown immediately after you shoot.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
3
Accessories
View images in the group
individually.
Appendix
●● Pressing the [ ][ ] buttons will display
only images in the group.
●● To cancel group playback, press the [
button, choose [ ] in the menu, and
press the [ ] button again (= 24).
Index
]
69
Before Use
Viewing Slideshows
Image Viewing Options
Still Images
Movies
Automatically play back images from a memory card as follows. Each
image is displayed for about three seconds.
Magnifying Images
Still Images
1
Movies
Magnify an image.
●● Moving the zoom lever toward [ ] will
zoom in and magnify the image, and
[
] is displayed. You can magnify
images up to about 10x by continuing to
hold the zoom lever.
●● The approximate position of the displayed
area (1) is shown for reference.
●● To zoom out, move the zoom lever toward
[ ]. You can return to single‑image
display by continuing to hold it.
2
Move the display position and
switch images as needed.
●● To move the display position, press the
[ ][ ][ ][ ] buttons.
] is displayed, you can
●● While [
] by pressing the [ ]
switch to [
button. To switch to other images while
zoomed, press the [ ][ ] buttons. Press
the [ ] button again to restore the
original setting.
Basic Guide
Advanced Guide
●● Press the [ ] button, choose [ ] in the
menu, and choose the desired option
(= 24).
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● The slideshow will start after [Loading
image] is displayed for a few seconds.
●● Press the [
slideshow.
Other Shooting Modes
] button to stop the
P Mode
Playback Mode
●● The camera’s power-saving functions (= 23) are deactivated
during slideshows.
Wi-Fi Functions
Setting Menu
●● To pause or resume slideshows, press the [ ] button.
●● You can switch to other images during playback by pressing the
[ ][ ] buttons. For fast-forward or fast-rewind, hold the [ ][ ]
buttons down.
●● In filtered display (= 68), only images matching search
conditions are played.
Accessories
Appendix
Index
●● You can return to single-image display from magnified display by
] button.
pressing the [
70
Changing Slideshow Settings
You can set up slideshows to repeat, and you can change the transitions
between images and the display duration of each image.
1
Access the setting screen.
●● Press the [
] button, and then
choose [Slideshow] on the [
] tab
(= 25).
2
Configure the setting.
●● Choose a menu item to configure, and
then choose the desired option (= 25).
●● To start the slideshow with your settings,
choose [Start] and press the [ ] button.
●● To return to the menu screen, press the
] button.
[
●● [Play Time] cannot be modified when [Bubble] is chosen in
[Effect].
Auto Playback of Related Images (Smart Shuffle)
Still Images
Movies
Based on the current image, the camera offers four images that you may
wish to view. After you choose to view one of those images, the camera
offers four more images. This is an enjoyable way to play back images in
an unexpected order. Try this feature after you have taken many shots, in
many kinds of scenes.
1
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Choose Smart Shuffle.
Other Shooting Modes
●● Press the [ ] button, and then choose
[ ] in the menu (= 24).
P Mode
●● Four candidate images are displayed.
Playback Mode
2
Wi-Fi Functions
Choose an image.
●● Press the [ ][ ][ ][ ] buttons to choose
the image you want to view next.
Setting Menu
●● Your chosen image is displayed in the
center, surrounded by the next four
candidate images.
Accessories
●● For full-screen display of the center
image, press the [ ] button. To restore
the original display, press the [ ] button
again.
Appendix
Index
] button to restore
●● Press the [
single-image display.
●● Smart Shuffle is not available in the following cases:
-- There are less than 50 shots taken with this camera
-- An unsupported image is currently displayed
-- Images are shown in filtered display (= 68)
-- During group playback (= 69)
71
Before Use
Using the Menu
Protecting Images
Still Images
Movies
Protect important images to prevent accidental erasure (= 74).
●● Press the [ ] button, and then choose
[
] in the menu (= 24). [Protected]
is displayed.
●● To cancel protection, repeat this process
] again, and then press
and choose [
the [ ] button.
●● Protected images on a memory card will be erased if you format
the card (= 117).
Basic Guide
1
Access the setting screen.
●● Press the [
] button and choose
[Protect] on the [
] tab (= 25).
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
2
Other Shooting Modes
Choose a selection method.
P Mode
●● Choose a menu item and an option as
desired (= 25).
Playback Mode
●● To return to the menu screen, press the
] button.
[
Wi-Fi Functions
●● Protected images cannot be erased using the camera’s erasure
function. To erase them this way, first cancel protection.
Setting Menu
Accessories
Appendix
Index
72
Choosing Images Individually
Before Use
Selecting a Range
Basic Guide
1
Choose [Select].
●● Following step 2 in “Using the Menu”
(= 72), choose [Select] and press the
[ ] button.
2
Choose an image.
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
[ ] is displayed.
1
Choose [Select Range].
●● Following step 2 in “Using the Menu”
(= 72), choose [Select Range] and
press the [ ] button.
2
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Choose a starting image.
●● Press the [
] button.
Other Shooting Modes
P Mode
●● To cancel selection, press the [ ] button
again. [ ] is no longer displayed.
●● Repeat this process to specify other
images.
3
Playback Mode
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
Wi-Fi Functions
Protect the image.
Setting Menu
●● Press the [
] button. A confirmation
message is displayed.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
●● Images will not be protected if you switch to Shooting mode or
turn the camera off before finishing the setup process in step 3.
Accessories
3
Appendix
Choose an ending image.
●● Press the [ ] button to choose [Last
image], and then press the [ ] button.
Index
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
●● Images before the first image cannot be
selected as the last image.
73
4
Protect the images.
●● Press the [ ] button to choose [Protect],
and then press the [ ] button.
Before Use
Erasing Images
Still Images
Movies
You can choose and erase unneeded images one by one. Be careful
when erasing images, because they cannot be recovered. However,
protected images (= 72) cannot be erased.
●● To cancel protection for groups of images, choose [Unlock] in
step 4.
Protecting All Images at Once
1
Choose [Protect All Images].
●● Following step 2 in “Using the Menu”
(= 72), choose [Protect All Images]
and press the [ ] button.
2
Protect the images.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
1
Basic Guide
Advanced Guide
Camera Basics
Choose an image to erase.
Auto Mode /
Hybrid Auto Mode
●● Press the [ ][ ] buttons to choose an
image.
2
Other Shooting Modes
Erase the image.
P Mode
●● Press the [ ] button, and then choose
[ ] in the menu (= 24).
Playback Mode
●● After [Erase?] is displayed, press the
[ ][ ] buttons to choose [Erase], and
then press the [ ] button.
Wi-Fi Functions
●● The current image is now erased.
Setting Menu
●● To cancel erasure, press the [ ][ ]
buttons to choose [Cancel], and then
press the [ ] button.
Accessories
Appendix
Index
Clearing All Protection at Once
You can clear protection from all images at once.
To clear protection, choose [Unprotect All Images] in step 1 of “Protecting
All Images at Once”, and then complete step 2.
74
Erasing Multiple Images at Once
You can choose multiple images to erase at once. Be careful when
erasing images, because they cannot be recovered. However, protected
images (= 72) cannot be erased.
Choosing a Selection Method
1
Access the setting screen.
●● Press the [
] button, and then
choose [Erase] on the [
] tab (= 25).
2
Choose a selection method.
●● Choose a menu item and an option as
desired (= 25).
●● To return to the menu screen, press the
] button.
[
Choosing Images Individually
1
Choose [Select].
●● Following step 2 in “Choosing a Selection
Method” (= 75), choose [Select] and
press the [ ] button.
2
Before Use
Basic Guide
Advanced Guide
Camera Basics
Choose an image.
Auto Mode /
Hybrid Auto Mode
●● Once you choose an image following
step 2 in “Choosing Images Individually”
(= 73), [ ] is displayed.
Other Shooting Modes
●● To cancel selection, press the [ ] button
again. [ ] is no longer displayed.
P Mode
●● Repeat this process to specify other
images.
Playback Mode
3
Erase the images.
Wi-Fi Functions
●● Press the [
] button. A confirmation
message is displayed.
Setting Menu
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Accessories
Appendix
Index
75
Selecting a Range
1
Choose [Select Range].
●● Following step 2 in “Choosing a Selection
Method” (= 75), choose [Select
Range] and press the [ ] button.
2
Choose images.
●● Follow steps 2 – 3 in “Selecting a Range”
(= 73) to specify images.
3
Specifying All Images at Once
Movies
Change the orientation of images and save them as follows.
1
Basic Guide
Advanced Guide
Choose [ ].
Camera Basics
●● Press the [ ] button, and then choose
[ ] in the menu (= 24).
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
2
P Mode
Rotate the image.
Playback Mode
●● Press the [ ] or [ ] button, depending
on the desired direction. Each time you
press the button, the image is rotated
90°. Press the [ ] button to complete the
setting.
Wi-Fi Functions
Setting Menu
Accessories
Choose [Select All Images].
●● Following step 2 in “Choosing a Selection
Method” (= 75), choose [Select All
Images] and press the [ ] button.
2
Still Images
Erase the images.
●● Press the [ ] button to choose [Erase],
and then press the [ ] button.
1
Before Use
Rotating Images
Appendix
Index
Erase the images.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
76
Using the Menu
Before Use
Deactivating Auto Rotation
1
Choose [Rotate].
●● Press the [
[Rotate] on the [
] button and choose
] tab (= 25).
Follow these steps to deactivate automatic image rotation, which rotates
images based on the current camera orientation.
●● Press the [
Rotate] on the [
[Off] (= 25).
] button, choose [Auto
] tab, and then choose
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
2
Other Shooting Modes
Rotate the image.
●● Press the [ ][ ] buttons to choose an
image.
●● The image is rotated 90° each time you
press the [ ] button.
●● To return to the menu screen, press the
] button.
[
P Mode
●● Images cannot be rotated (= 76) when you set [Auto Rotate]
to [Off]. Additionally, images already rotated will be displayed in
the original orientation.
●● In Smart Shuffle (= 71) mode, even if [Auto Rotate] is set
to [Off], images shot vertically will be displayed vertically, and
rotated images will be displayed in the rotated orientation.
Playback Mode
Wi-Fi Functions
Setting Menu
●● Rotation is not possible when [Auto Rotate] is set to [Off]
(= 77).
Accessories
Appendix
Index
77
2
Tagging Images as Favorites
Still Images
Movies
You can organize images by tagging them as favorites. By choosing a
category in filtered playback, you can restrict the following operations to
all of those images.
●● “Viewing” (= 64), “Viewing Slideshows” (= 70), “Protecting
Images” (= 72), “Erasing Images” (= 74), “Adding Images to
the Print List (DPOF)” (= 131), “Adding Images to a Photobook”
(= 133)
●● Press the [ ] button, and then choose
[ ] in the menu (= 24).
●● [Tagged as Favorite] is displayed.
●● To untag the image, repeat this process
and choose [ ] again, and then press
the [ ] button.
Using the Menu
Choose an image.
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
[ ] is displayed.
●● To untag the image, press the [ ] button
again. [ ] is no longer displayed.
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● Repeat this process to choose additional
images.
3
Auto Mode /
Hybrid Auto Mode
Finish the setup process.
Other Shooting Modes
●● Press the [
] button. A confirmation
message is displayed.
P Mode
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Playback Mode
Wi-Fi Functions
●● Images will not be tagged as favorites if you switch to Shooting
mode or turn the camera off before finishing the setup process in
step 3.
Setting Menu
Accessories
1
Appendix
Choose [Favorites].
●● Press the [
] button and choose
[Favorites] on the [
] tab (= 25).
Index
78
4
Editing Still Images
Save the new image.
Before Use
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
●● The image is now saved as a new file.
●● Image editing (= 79 – = 81) is only available when the
memory card has sufficient free space.
5
Resizing Images
Basic Guide
Advanced Guide
Camera Basics
Review the new image.
Auto Mode /
Hybrid Auto Mode
●● Press the [
] button. [Display new
image?] is displayed.
Still Images
Movies
Save a copy of images at a lower number of recording pixels.
1
P Mode
●● The saved image is now displayed.
Choose [Resize].
●● Press the [
] button and choose
[Resize] on the [
] tab (= 25).
Other Shooting Modes
●● Press the [ ][ ] buttons to choose [Yes],
and then press the [ ] button.
Playback Mode
●● Editing is not possible for images shot at a recording pixel setting
of [ ] (= 39).
Wi-Fi Functions
Setting Menu
2
Choose an image.
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
3
●● Images cannot be resized to a higher number of recording pixels.
Appendix
Cropping
Choose an image size.
●● Press the [ ][ ] buttons to choose the
size, and then press the [ ] button.
●● [Save new image?] is displayed.
Accessories
Still Images
Movies
Index
You can specify a portion of an image to save as a separate image file.
1
Choose [Cropping].
●● Press the [
] button, and then
choose [Cropping] on the [
] tab
(= 25).
79
2
Choose an image.
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
(1)
(2) (3)
3
Adjust the cropping area.
●● A frame is displayed around the portion of
the image to be cropped (1).
●● The original image is shown in the upper
left, and a preview of the image as
cropped (2) is shown in the lower right.
You can also see the number of recording
pixels after cropping (3).
●● To resize the frame, move the zoom
lever.
●● To move the frame, press the
[ ][ ][ ][ ] buttons.
●● To change the frame orientation, press
the [ ] button.
●● Press the [
4
] button.
Save as a new image and review.
Before Use
Changing Image Color Tones (My Colors)
Still Images
Movies
You can adjust image colors and then save the edited image as a
separate file. For details on each option, see “Changing Image Color
Tones (My Colors)” (= 56).
1
Basic Guide
Advanced Guide
Camera Basics
Choose [My Colors].
Auto Mode /
Hybrid Auto Mode
●● Press the [
] button, and then
choose [My Colors] on the [
] tab
(= 25).
2
Other Shooting Modes
P Mode
Choose an image.
Playback Mode
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
3
Wi-Fi Functions
Choose an option.
Setting Menu
●● Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
Accessories
●● Follow steps 4 – 5 in “Resizing Images”
(= 79).
●● Editing is not possible for images shot at a recording pixel setting
of [ ] (= 39) or resized to [ ] (= 79).
●● Images supported for cropping will have the same aspect ratio
after cropping.
●● Cropped images will have a lower number of recording pixels than
uncropped images.
Appendix
4
Save as a new image and review.
Index
●● Follow steps 4 – 5 in “Resizing Images”
(= 79).
●● Image quality of pictures you repeatedly edit this way will be
a little lower each time, and you may not be able to obtain the
desired color.
●● The color of images edited using this function may vary slightly
from the color of images shot using My Colors (= 56).
80
Correcting Image Brightness (i-Contrast)
Still Images
Movies
Excessively dark image areas (such as faces or backgrounds) can be
detected and automatically adjusted to the optimal brightness. Insufficient
overall image contrast is also automatically corrected, to make subjects
stand out better. Choose from four correction levels, and then save the
image as a separate file.
1
Choose [i-Contrast].
●● Press the [
] button, and then
choose [i-Contrast] on the [
] tab
(= 25).
2
Choose an option.
●● Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
4
Basic Guide
Advanced Guide
Correcting Red-Eye
Still Images
Camera Basics
Movies
Auto Mode /
Hybrid Auto Mode
Automatically corrects images affected by red-eye. You can save the
corrected image as a separate file.
1
Other Shooting Modes
Choose [Red-Eye Correction].
●● Press the [
] button, and then
choose [Red-Eye Correction] on the [
tab (= 25).
P Mode
]
Playback Mode
Choose an image.
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
3
Before Use
●● If [Auto] does not produce the expected results, try correcting
images using [Low], [Medium], or [High].
Save as a new image and review.
●● Follow steps 4 – 5 in “Resizing Images”
(= 79).
Wi-Fi Functions
2
Choose an image.
Setting Menu
●● Press the [ ][ ] buttons to choose an
image.
3
Accessories
Correct the image.
●● Press the [
] button.
●● Red-eye detected by the camera is now
corrected, and frames are displayed
around corrected image areas.
Appendix
Index
●● Enlarge or reduce images as needed.
Follow the steps in “Magnifying Images”
(= 70).
●● For some images, correction may be inaccurate or may cause
images to appear grainy.
●● Images may look grainy after repeated editing using this function.
81
4
Save as a new image and review.
●● The image is now saved as a new file.
●● Follow step 5 in “Resizing Images”
(= 79).
Before Use
Editing Movies
●● Press the [ ][ ][ ][ ] buttons to choose
[New File], and then press the [ ] button.
Still Images
Movies
You can remove unneeded portions from the beginning and end of
movies.
1
●● Some images may not be corrected accurately.
●● To overwrite the original image with the corrected image, choose
[Overwrite] in step 4. In this case, the original image will be
erased.
●● Protected images cannot be overwritten.
Basic Guide
Advanced Guide
Camera Basics
Choose [ ].
●● Following steps 1 – 5 in “Viewing”
(= 64), choose [ ] and press the [
button.
Auto Mode /
Hybrid Auto Mode
]
Other Shooting Modes
●● The movie editing panel and editing bar
are now displayed.
2
(1)
P Mode
Specify portions to cut.
Playback Mode
●● (1) is the movie editing panel, and (2) is
the editing bar.
●● Press the [
or [ ].
(2)
][
] buttons to choose [
Wi-Fi Functions
]
●● To view the portions you can cut
(identified by [ ] on the screen), press
the [ ][ ] buttons to move [ ]. Cut the
beginning of the movie (from [ ]) by
choosing [ ], and cut the end of the
movie by choosing [ ].
Setting Menu
Accessories
Appendix
Index
●● If you move [ ] to a position other than a
[ ] mark, in [ ] the portion before the
nearest [ ] mark on the left will be cut,
while in [ ] the portion after the nearest
[ ] mark on the right will be cut.
82
3
Review the edited movie.
●● Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button. The edited
movie is now played.
●● To edit the movie again, repeat step 2.
●● To cancel editing, press the [ ][ ]
buttons to choose [ ]. Press the [ ]
button, press the [ ][ ] buttons to choose
[OK], and then press the [ ] button
again.
Before Use
Editing Digest Movies
Still Images
Movies
Individual chapters (clips) (= 30) recorded in [ ] mode can be
erased, as needed. Be careful when erasing clips, because they cannot
be recovered.
1
●● Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button.
●● Press the [ ][ ][ ][ ] buttons to choose
[New File], and then press the [ ] button.
●● Press the [ ][ ] buttons to choose [
[ ], and then press the [ ] button.
Save the edited movie.
●● The movie is now saved as a new file.
●● To overwrite the original movie with the cut one, choose
[Overwrite] in step 4. In this case, the original movie will be
erased.
●● If the memory card lacks sufficient space, only [Overwrite] will be
available.
●● Movies may not be saved if the battery pack runs out while saving
is in progress.
●● When editing movies, you should use a fully charged battery
pack.
2
Advanced Guide
Camera Basics
Select the clip to erase.
●● Follow steps 1 – 2 in “Viewing Short
Movies Created When Shooting Still
Images (Digest Movies)” (= 66) to
play a movie created in [ ] mode, and
then press the [ ] button to access the
movie control panel.
4
Basic Guide
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
] or
Wi-Fi Functions
Choose [ ].
Setting Menu
●● Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button.
Accessories
●● The selected clip is played back
repeatedly.
3
Confirm erasure.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Appendix
Index
●● The clip is erased, and the short movie is
overwritten.
●● [ ] is not displayed if you select a clip when the camera is
connected to a printer.
83
Viewing Albums (Story Highlights)
Still Images
Movies
You can choose themes such as a date to create an album of
automatically selected images that match the theme. These images are
combined into a slideshow that can be saved as a short movie of about
2 – 3 minutes.
Before using this feature, make sure the battery pack is fully charged.
Creating albums also requires free space on the memory card. As a
guideline, use a memory card with a capacity of 16 GB or higher, and
ensure at least 1 GB of free space.
Choosing Themes for Albums
Press the [ ] button to access the home screen and choose themes for
the camera to use when selecting album elements. Note that the camera
is more likely to add images tagged as favorites (= 78) to albums.
Date
Creates an album of images shot on the same day.
Images are selected from those shot on the same day as
the image displayed before you access the home screen.
Event
A good choice for albums of vacations, parties, or other
events.
Images are selected from those shot during the event
before and after the image displayed before you access
the home screen.
Custom
Includes images based on your specified image or
shooting date.
1
Choose an image.
●● Choose an image in single-image display.
●● Themes available in step 3 will vary
depending on image shooting date.
2
Access the home screen.
●● Press the [
] button.
●● After [Busy] is displayed, the home
screen is displayed.
3
Preview an album.
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● Press the [ ][ ] buttons to choose [Date]
or [Event] as the album theme, and then
press the [ ] button.
Auto Mode /
Hybrid Auto Mode
●● After [Loading] is displayed for a few
seconds, the album is played.
4
Other Shooting Modes
P Mode
Save the album.
●● Press the [ ][ ] buttons to choose
[Save Album as Movie], and then press
the [ ] button.
Playback Mode
Wi-Fi Functions
●● Once the album is saved, [Saved] is
displayed.
5
Setting Menu
Accessories
Play the album (= 64).
Appendix
Index
●● Albums can include following images captured by the camera.
-- Still images
-- Digest movies (= 30), except compressed movies
84
●● Albums cannot be saved unless there is enough space on the
memory card.
●● You can specify the color effect in step 4 by choosing [Change
Color Effect] and pressing the [ ] button. To preview how the
album looks with your selected effect applied, choose [Preview
Album Again] on the screen in step 4 after pressing the [ ][ ]
buttons to choose a color effect and pressing the [ ] button.
●● To play saved albums, choose [List of Albums] on the Story
Highlights home screen, press the [ ] button, choose a listed
album, and press the [ ] button again.
Adding Background Music to Albums
Still Images
Configure background music
settings.
●● On the screen in step 4 of “Viewing
Albums (Story Highlights)” (= 84),
choose [Music Settings].
●● Press the [ ][ ] buttons to choose an
item. Press the [ ] button, and then
press the [ ][ ] buttons to choose the
desired option (= 25).
3
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● If you prefer not to add background music, set [Add BGM] to [No]
on the screen in step 3.
●● To listen to a sample of the background music selected in [Track],
choose [Sample BGM] on the screen in step 3 and press the [ ]
button.
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Creating Your Own Albums
Create the album.
●● Follow steps 1 – 3 in “Viewing Albums
(Story Highlights)” (= 84) to create an
album.
2
Before Use
Movies
Choose from three kinds of background music to play during album
playback.
1
●● Once albums are saved, background music cannot be added
later. Background music in albums cannot be removed or
changed.
●● Chapters of albums with background music cannot be edited
(= 83).
●● Movie audio is not played if you add background music to the
album.
Still Images
Setting Menu
Movies
Create your own albums by choosing desired images.
1
Choose to create a Custom album.
●● Following steps 1 – 3 in “Viewing Albums
(Story Highlights)” (= 84), choose
[Custom] and press the [ ] button.
2
Accessories
Appendix
Index
Choose a selection method.
●● Choose [Image Selection] or [Date
Selection], and then press the [ ] button.
Save the album.
●● Follow step 4 in “Viewing Albums (Story
Highlights)” (= 84) to save albums.
85
3
Choose album elements.
●● Once you select the elements for your
album and press the [ ] button, your
selected elements are labeled with [ ].
] button after you are
●● Press the [
finished selecting still images or digest
movies in [Image Selection], or dates in
[Date Selection].
●● Up to 40 files can be selected if you choose [Image Selection].
The second time you create a custom album, [Select images
based on previous settings?] is displayed. To use previously
selected images as the basis, choose [Yes]. The previous images
are labeled with [ ], and multiple images are displayed at once.
●● Up to 15 dates can be selected if you choose [Date Selection].
●● The color effect may not be applied to some images.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● Press the [ ][ ] buttons to choose
[Preview], and then press the [ ] button.
4
Other Shooting Modes
Choose background music.
P Mode
●● When the screen at left is displayed,
choose [Music Settings]. Add background
music as described in “Adding
Background Music to Albums” (= 85),
and then press the [
] button.
5
Playback Mode
Wi-Fi Functions
Setting Menu
Choose a color effect.
●● On the screen in step 4 of “Viewing
Albums (Story Highlights)” (= 84),
choose [Change Color Effect].
●● Press the [ ][ ] buttons to choose a
color effect, and then press the [ ]
button.
6
Accessories
Appendix
Index
Save the album.
●● Follow step 4 in “Viewing Albums (Story
Highlights)” (= 84) to save albums.
86
Available Wi-Fi Features
You can send and receive images and control the camera remotely by
connecting it to these devices and services via Wi-Fi.
Wi-Fi Functions
Send images wirelessly from the camera to a variety of compatible
devices, and use the camera with Web services
●● Before using Wi-Fi, be sure to read “Wi-Fi (Wireless LAN)
Precautions” (= 155).
Before Use
Basic Guide
Advanced Guide
●● Smartphones and Tablets
Send images to smartphones and tablet computers that have Wi-Fi
functions. You can also shoot remotely and geotag your shots from a
smartphone or tablet.
For convenience in this manual, smartphones, tablets, and other
compatible devices are collectively referred to as “smartphones”.
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
●● Computer
Use software to save camera images to a computer connected via
Wi-Fi.
P Mode
●● Web Services
Add your account information to the camera for CANON iMAGE
GATEWAY online photography service or other Web services to
send camera images to the services. Unsent images on the camera
can also be sent to a computer or Web service via CANON iMAGE
GATEWAY.
Playback Mode
Wi-Fi Functions
Setting Menu
●● Printers
Send images wirelessly to a PictBridge-compatible printer (supporting
DPS over IP) to print them.
●● Another Camera
Send images wirelessly between Wi-Fi-compatible Canon cameras.
Accessories
Appendix
Index
87
Sending Images to a Smartphone
There are several ways to connect the camera to a smartphone and send
images.
●● Connect via NFC (= 88)
Simply touch an NFC-compatible Android smartphone (OS version 4.0
or later) against the camera to connect the devices.
●● Connect via the Wi-Fi menu (= 91)
You can connect the camera to a smartphone as you would connect it
to a computer or other device. Multiple smartphones can be added.
Before connecting to the camera, you must install the free dedicated
Camera Connect app on the smartphone. For details on this application
(supported smartphones and included functions), refer to the Canon
website.
●● Canon Wi-Fi-compatible camera users who connect their camera
to a smartphone via Wi-Fi should consider switching from the
CameraWindow mobile app to the Camera Connect mobile app.
Sending Images to an NFC-Compatible
Smartphone
Before Use
Use an Android (OS version 4.0 or later) smartphone’s NFC to simplify the
process of installing Camera Connect and connecting to the camera.
Operation when devices are initially connected via NFC varies depending
on the camera mode when the devices are touched together.
Advanced Guide
Basic Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● If the camera is off or in Shooting mode when the devices are touched
together, you can choose and send images on the image selection
screen. Once the devices are connected, you can also shoot remotely
and geotag your shots (= 110). It’s easy to reconnect to recent
devices, which are listed in the Wi-Fi menu.
Other Shooting Modes
P Mode
●● If the camera is in Playback mode when the devices are touched
together, you can choose and send images from the index display
shown for image selection.
Playback Mode
Wi-Fi Functions
Follow the instructions in the following section for NFC-initiated connection
to a camera that is off or in Shooting mode.
Setting Menu
Connecting via NFC When Camera Is Off or in
Shooting Mode
1
Accessories
Appendix
Install Camera Connect.
●● Activate NFC on the smartphone and
touch the devices’ N-Marks ( ) together
to start Google Play on the smartphone
automatically. Once the Camera Connect
download page is displayed, download
and install the app.
Index
88
2
Establish the connection.
●● Make sure the camera is off or in
Shooting mode.
●● Touch the N-Mark ( ) on the smartphone
with Camera Connect installed against
the camera’s N-Mark.
●● The camera screen automatically
changes.
●● If the [Device Nickname] screen is
displayed, press the [ ][ ] buttons to
choose [OK], and then press the [ ]
button.
4
Send an image.
●● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
●● Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
●● Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [
] button.
Camera Basics
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Other Shooting Modes
Auto Mode /
Hybrid Auto Mode
P Mode
●● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
●● Camera Connect is started on the
smartphone.
●● The devices are connected automatically.
3
Adjust the privacy setting.
●● After this screen is displayed, press the
[ ][ ] buttons to choose [Yes], and then
press the [ ] button.
Playback Mode
●● [Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
Wi-Fi Functions
●● To end the connection, press the
] button, press the [ ][ ] buttons
[
on the confirmation screen to choose
[OK], and then press the [ ] button. You
can also use the smartphone to end the
connection.
Setting Menu
Accessories
Appendix
Index
●● You can now use the smartphone to
browse, import, or geotag images on the
camera or shoot remotely.
89
●● When using NFC, keep the following points in mind.
-- Avoid strong impact between the camera and smartphone.
This may damage the devices.
-- Depending on the smartphone, the devices may not recognize
each other immediately. In this case, try holding the devices
together in slightly different positions. If connection is not
established, keep the devices together until the camera screen
is updated.
-- If you attempt connection when the camera is off, a message
may be displayed on the smartphone reminding you to turn on
the camera. If so, turn the camera on and touch the devices
together again.
-- Do not place other objects between the camera and
smartphone. Also, note that camera or smartphone covers or
similar accessories may block communication.
●● All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 3. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 3.
●● Once you have registered a smartphone, you can change privacy
settings for it on the camera (= 111).
●● Connections require that a memory card be in the camera.
●● You can also change the camera nickname on the screen in step 2
(= 89).
●● Not all NFC-compatible smartphones have an N-Mark ( ).
For details, refer to the smartphone user manual.
●● You can also send multiple images at once and change the image
size before sending (= 105).
●● You can send the current image by choosing [Send this image] on
the screen in step 4.
●● To disable NFC connections, choose MENU (= 25) ► [ ] tab
► [Wireless settings] ► [Wi-Fi Settings] ► [NFC] ► [Off].
Connecting via NFC When Camera Is in Playback
Mode
●● Press the [
on.
] button to turn the camera
●● Touch the smartphone with Camera
Connect installed (= 88) against the
camera’s N-Mark ( ).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● Press the [ ][ ][ ][ ] buttons to choose
an image to send, and then press the [ ]
button. [ ] is displayed.
Other Shooting Modes
●● To cancel selection, press the [ ] button
again. [ ] is no longer displayed.
P Mode
●● Repeat this process to choose additional
images.
Playback Mode
●● After you finish choosing images, press
] button.
the [
Wi-Fi Functions
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Setting Menu
●● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
Accessories
●● The images are now sent.
●● If during connection a message on the camera requests you to
enter the nickname, follow step 2 in “Sending Images to an
NFC-Compatible Smartphone” (= 88) to enter it.
●● The camera does not keep a record of smartphones you connect
to via NFC in Playback mode.
●● You can preset images to transfer at your desired size (= 105).
Appendix
Index
90
4
Adding a Smartphone
These steps show how to use the camera as an access point, but you can
also use an existing access point (= 93).
1
Choose [Add a Device].
●● Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
Before Use
Basic Guide
Advanced Guide
Install Camera Connect.
●● For an iPhone or iPad, find Camera
Connect in the App Store and download
and install the app.
Camera Basics
●● The camera SSID and password are
displayed.
Auto Mode /
Hybrid Auto Mode
●● For Android smartphones, find Camera
Connect in Google Play and download
and install the app.
2
Access the Wi-Fi menu.
●● Press the [
] button.
●● If the [Device Nickname] screen is
displayed, choose [OK].
3
Choose [ ].
●● Press the [ ][ ][ ][ ] buttons to choose
[ ], and then press the [ ] button.
Other Shooting Modes
P Mode
5
Playback Mode
Connect the smartphone to the
network.
Wi-Fi Functions
●● In the smartphone’s Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
Setting Menu
Accessories
●● In the password field, enter the password
displayed on the camera.
6
Start Camera Connect.
●● Start Camera Connect on the
smartphone.
7
Appendix
Index
Select the camera to connect to.
●● On the camera selection screen
displayed on the smartphone, choose the
camera to begin pairing.
91
8
Adjust the privacy setting.
●● Press the [ ][ ] buttons to choose [Yes],
and then press the [ ] button.
●● You can now use the smartphone to
browse, import, or geotag images on the
camera or shoot remotely.
9
●● All images in the camera can be viewed from the connected
smartphone when you choose [Yes] in step 8. To keep camera
images private, so that they cannot be viewed from the
smartphone, choose [No] in step 8.
●● Once you have registered a smartphone, you can change privacy
settings for it on the camera (= 111).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Send an image.
●● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
●● Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
●● Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [
] button.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
●● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
●● [Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
●● To end the connection, press the
] button, press the [ ][ ] buttons
[
on the confirmation screen to choose
[OK], and then press the [ ] button.
You can also use the smartphone to end
the connection.
●● Connections require that a memory card be in the camera.
●● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●● If you prefer not to display recent target devices, choose MENU
(= 25) ► [ ] tab ► [Wireless settings] ► [Wi-Fi Settings] ►
[Target History] ► [Off].
●● To connect without entering a password in step 5, choose MENU
(= 25) ► [ ] tab ► [Wireless settings] ► [Wi-Fi Settings]
► [Password] ► [Off]. [Password] is no longer displayed on the
SSID screen (in step 4).
●● You can also send multiple images at once and change the image
size before sending (= 105).
●● You can send the current image by choosing [Send this image] on
the screen in step 9.
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
●● To add multiple smartphones, repeat the
above procedure starting from step 1.
92
5
Using Another Access Point
When connecting the camera to a smartphone through the Wi-Fi menu,
you can also use an existing access point.
1
6
Prepare for the connection.
●● Access the [Waiting to connect] screen
by following steps 1 – 4 in “Adding a
Smartphone” (= 91).
2
3
Configure the privacy settings and
send images.
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● Follow steps 8 – 9 in “Adding a
Smartphone” (= 91) to configure the
privacy settings and send images.
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Connect the smartphone to the
access point.
Previous Access Points
P Mode
You can reconnect to any previous access points automatically by
following step 4 in “Adding a Smartphone” (= 91).
Choose [Switch Network].
●● Press the [ ][ ] buttons to choose
[Switch Network], and then press the [
button.
]
●● A list of detected access points will be
displayed.
4
Select the camera to connect to.
●● On the camera selection screen
displayed on the smartphone, choose the
camera to begin pairing.
Playback Mode
●● To use the camera as an access point, choose [Switch Network] on the
screen displayed when you establish a connection, and then choose
[Camera Access Point Mode].
Wi-Fi Functions
Setting Menu
●● To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then follow the
procedure in “Using Another Access Point” (= 93) from step 4.
Accessories
Appendix
Connect to the access point.
●● For WPS-compatible access points,
connect to the access point as described
in steps 5 – 8 in “Using WPS-Compatible
Access Points” (= 96).
Index
●● For non-WPS access points, follow
steps 2 – 4 in “Connecting to Listed
Access Points” (= 98) to connect to
the access point.
93
Saving Images to a Computer
Preparing to Register a Computer
For details on computers that you can connect the camera to via Wi‑Fi,
system requirements, and other compatibility information (including
support in new operating systems), visit the Canon website.
●● Windows 7 Starter and Home Basic editions are not supported.
●● Windows 7 N (European version) and KN (South Korean version)
require a separate download and installation of Windows Media
Feature Pack.
For details, check the following website.
http://go.microsoft.com/fwlink/?LinkId=159730
Installing the Software
Windows 7 and Mac OS X 10.9 are used here for the sake of illustration.
1
Download the software.
●● With a computer connected
to the Internet, access
http://www.canon.com/icpd/.
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● Access the site for your country or region.
Auto Mode /
Hybrid Auto Mode
●● Download the software.
2
Other Shooting Modes
Install the software.
●● Click [Easy Installation] and follow the
on-screen instructions to complete the
installation process.
P Mode
Playback Mode
●● Installation may take some time,
depending on computer performance and
the Internet connection.
Wi-Fi Functions
●● Click [Finish] or [Restart] on the screen
after installation.
Setting Menu
Accessories
●● Internet access is required, and any ISP account charges and
access fees must be paid separately.
Appendix
Index
●● To uninstall the software, follow these steps.
-- Windows: Select [Start] menu ► [All Programs] ► [Canon
Utilities], and then choose the software for uninstallation.
-- Mac OS: In the [Canon Utilities] folder within the [Applications]
folder, drag the folder of the software for uninstallation to the
Trash, and then empty the Trash.
94
Configuring the Computer for a Wi-Fi Connection
(Windows Only)
On a computer running Windows, configure the following settings before
connecting the camera to the computer wirelessly.
1
Confirm that the computer is
connected to an access point.
●● For instructions on checking your network
connection, refer to the computer user
manual.
2
Configure the setting.
●● Click in the following order: [Start] menu
► [All Programs] ► [Canon Utilities] ►
[CameraWindow] ► [Wi-Fi connection
setup].
●● In the application that opens, follow the
on-screen instructions and configure the
setting.
●● The following Windows settings are configured when you run the
utility in step 2.
-- Turn on media streaming.
This will enable the camera to see (find) the computer to access
via Wi-Fi.
-- Turn on network discovery.
This will enable the computer to see (find) the camera.
-- Turn on ICMP (Internet Control Message Protocol).
This allows you to check the network connection status.
-- Enable Universal Plug & Play (UPnP).
This will enable network devices to detect each other
automatically.
●● Some security software may prevent you from completing the
settings as described here. Check the settings of your security
software.
Saving Images to a Connected Computer
Connect to your access point via Wi-Fi as follows.
Also refer to the access point user manual.
Before Use
Basic Guide
Advanced Guide
Confirming Access Point Compatibility
Camera Basics
Confirm that the Wi-Fi router or base station conforms to the Wi-Fi
standards in “Camera” (= 149).
Connection methods vary depending on whether the access point
supports Wi-Fi Protected Setup (WPS, = 96) or not (= 98). For nonWPS access points, check the following information.
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
●● Network name (SSID/ESSID)
The SSID or ESSID for the access point you use. Also called the
“access point name” or “network name”.
P Mode
Playback Mode
●● Network authentication / data encryption (encryption method /
encryption mode)
The method for encrypting data during wireless transmission.
Check which security setting is used: WPA2-PSK (AES), WPA2-PSK
(TKIP), WPA-PSK (AES), WPA-PSK (TKIP), WEP (open system
authentication), or no security.
Wi-Fi Functions
Setting Menu
Accessories
●● Password (encryption key / network key)
The key used when encrypting data during wireless transmission.
Also called the “encryption key” or “network key”.
●● Key index (transmit key)
The key set when WEP is used for network authentication / data
encryption. Use “1” as the setting.
Appendix
Index
●● If system administrator status is needed to adjust network
settings, contact the system administrator for details.
●● These settings are very important for network security. Exercise
adequate caution when changing these settings.
95
●● For information on WPS compatibility and for instructions on
checking settings, refer to the access point user manual.
●● A router is a device that creates a network (LAN) structure for
connecting multiple computers. A router that contains an internal
Wi-Fi function is called a “Wi-Fi router”.
●● This guide refers to all Wi-Fi routers and base stations as “access
points”.
●● If you use MAC address filtering on your Wi-Fi network, be sure
to add the camera’s MAC address to your access point. You can
check your camera’s MAC address by choosing MENU (= 25)
► [ ] tab ► [Wireless settings] ► [Wi-Fi Settings] ► [Check
MAC Address].
●● If the [Device Nickname] screen is
displayed, press the [ ][ ] buttons to
choose [OK], and then press the [ ]
button.
Before Use
Basic Guide
Advanced Guide
Camera Basics
3
Choose [
].
Auto Mode /
Hybrid Auto Mode
●● Press the [ ][ ][ ][ ] buttons to choose
[ ], and then press the [ ] button.
Other Shooting Modes
P Mode
Using WPS-Compatible Access Points
WPS makes it easy to complete settings when connecting devices over
Wi-Fi. You can use either Push Button Configuration Method or PIN
Method for settings on a WPS supported device.
1
Playback Mode
Choose [Add a Device].
Wi-Fi Functions
●● Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
Setting Menu
Confirm that the computer is
connected to an access point.
●● For instructions on checking the
connection, refer to the device and
access point user manuals.
2
4
Access the Wi-Fi menu.
●● Press the [
] button.
Accessories
5
●● Press the [ ][ ] buttons to choose
[WPS Connection], and then press the
[ ] button.
6
Appendix
Choose [WPS Connection].
Index
Choose [PBC Method].
●● Press the [ ][ ] buttons to choose [PBC
Method], and then press the [ ] button.
96
7
Establish the connection.
●● On the access point, hold down the WPS
connection button for a few seconds.
●● On the camera, press the [
go to the next step.
] button to
●● The camera connects to the access point
and lists devices connected to it on the
[Select a Device] screen.
8
Choose the target device.
●● Press the [ ][ ] buttons to choose the
target device name, and then press the
[ ] button.
9
Install a driver (first Windows
connection only).
●● When this screen is displayed on the
camera, click the Start menu on the
computer, click [Control Panel], and then
click [Add a device].
10
Display CameraWindow.
●● Windows: Access CameraWindow by
clicking [Downloads Images From Canon
Camera].
●● Mac OS: CameraWindow is automatically
displayed when a Wi-Fi connection is
established between the camera and
computer.
11
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Import images.
●● Click [Import Images from Camera], and
then click [Import Untransferred Images].
Other Shooting Modes
●● Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
P Mode
Playback Mode
●● Click [OK] in the screen that is displayed
after image import is complete.
Wi-Fi Functions
●● To view images you save to a computer,
use preinstalled or commonly available
software compatible with images
captured by the camera.
Setting Menu
Accessories
Appendix
Index
●● Double-click the connected camera icon.
●● Driver installation will begin.
●● After driver installation is complete, and
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
97
●● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●● If you prefer not to display recent target devices, choose MENU
(= 25) ► [ ] tab ► [Wireless settings] ► [Wi-Fi Settings] ►
[Target History] ► [Off].
●● You can also change the camera nickname on the screen in
step 2 (= 96).
●● When the camera is connected to a computer, the camera screen
is blank.
●● Mac OS: If CameraWindow is not displayed, click the
[CameraWindow] icon in the Dock.
●● To disconnect from the camera, turn off the camera.
●● If you chose [PIN Method] in step 6, a PIN code will be displayed
on the screen. Be sure to set this code in the access point.
Choose a device in the [Select a Device] screen. For further
details, refer to the user manual included with your access point.
Connecting to Listed Access Points
1
View the listed access points.
●● View the listed networks (access points)
as described in steps 1 – 4 of “Using
WPS-Compatible Access Points”
(= 96).
2
3
Enter the access point password.
●● Press the [ ] button to access the
keyboard, and then enter the password
(= 26).
●● Press the [ ][ ] buttons to choose
[Next], and then press the [ ] button.
4
Before Use
Basic Guide
Advanced Guide
Camera Basics
Choose [Auto].
Auto Mode /
Hybrid Auto Mode
●● Press the [ ][ ] buttons to choose
[Auto], and then press the [ ] button.
Other Shooting Modes
●● To save images to a connected computer,
follow the procedure from step 8 in
“Using WPS-Compatible Access Points”
(= 96).
●● To determine the access point password, check on the access
point itself or refer to the user manual.
●● If no access points are detected even after you choose [Refresh]
in step 2 to update the list, choose [Manual Settings] in step 2
to complete access point settings manually. Follow on-screen
instructions and enter an SSID, security settings, and a password.
●● When you use an access point that you have already connected
to for connecting to another device, [*] is displayed for the
password in step 3. To use the same password, press the [ ][ ]
buttons to choose [Next], and then press the [ ] button.
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Choose an access point.
●● Press the [ ][ ] buttons to choose a
network (access point), and then press
the [ ] button.
98
Previous Access Points
You can reconnect to any previous access points automatically by
following step 4 in “Using WPS-Compatible Access Points” (= 96).
●● To connect to a device via an access point, confirm that the target
device is already connected to the access point, and then follow the
procedure from step 8 in “Using WPS-Compatible Access Points”
(= 96).
●● To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then either follow
the procedure in “Using WPS-Compatible Access Points” (= 96)
from step 5 or the procedure in “Connecting to Listed Access Points”
(= 98) from step 2.
Sending Images to a Registered
Web Service
Before Use
Basic Guide
Advanced Guide
Registering Web Services
Camera Basics
Auto Mode /
Hybrid Auto Mode
Use a smartphone or computer to add to the camera Web services that
you want to use.
Other Shooting Modes
●● A smartphone or computer with a browser and Internet connection is
required to complete camera settings for CANON iMAGE GATEWAY
and other Web services.
P Mode
●● Check the CANON iMAGE GATEWAY website for details on browser
(Microsoft Internet Explorer, etc.) requirements, including settings and
version information.
Playback Mode
Wi-Fi Functions
●● For information on countries and regions where CANON
iMAGE GATEWAY is available, visit the Canon website
(http://www.canon.com/cig/).
Setting Menu
●● You must have an account with Web services other than CANON
iMAGE GATEWAY if you desire to use them. For further details,
check the websites for each Web service you want to register.
Accessories
Appendix
●● Separate ISP connection and access point fees may be applicable.
●● CANON iMAGE GATEWAY also provides user guides for
downloading.
Index
99
Registering CANON iMAGE GATEWAY
Link the camera and CANON iMAGE GATEWAY by adding CANON
iMAGE GATEWAY as a destination Web service on the camera. Note
that you will need to enter an email address used on your computer or
smartphone to receive a notification message for completing linkage
settings.
1
Access the Wi-Fi menu.
●● Press the [
] button.
●● If the [Device Nickname] screen is
displayed, press the [ ][ ] buttons to
choose [OK], and then press the [ ]
button.
4
●● Connect to the access point as described
in steps 5 – 7 in “Using WPS-Compatible
Access Points” (= 96) or in steps 2 – 4
in “Connecting to Listed Access Points”
(= 98).
5
Choose [
].
●● Press the [ ][ ][ ][ ] buttons to choose
[
], and then press the [ ] button.
Accept the agreement to enter an
email address.
●● Read the agreement displayed, press the
[ ][ ] buttons to choose [I Agree], and
then press the [ ] button.
Basic Guide
Advanced Guide
Camera Basics
Enter your email address.
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
●● Enter your email address, press the
[ ][ ] buttons to choose [Next], and
then press the [ ] button.
Playback Mode
Enter a four-digit number.
Wi-Fi Functions
●● Enter a four-digit number of your choice,
press the [ ][ ] buttons to choose
[Next], and then press the [ ] button.
Setting Menu
Accessories
●● You will need this four-digit number later
when setting up linkage with CANON
iMAGE GATEWAY in step 8.
7
3
Before Use
●● Once the camera is connected to CANON
iMAGE GATEWAY via the access point, a
screen is displayed for entering an email
address.
6
2
Establish a connection with an
access point.
Check for the notification message.
●● Once information has been sent to
CANON iMAGE GATEWAY, you will
receive a notification message at the
email address entered in step 5.
Appendix
Index
●● Press the [ ] button on the next screen,
which indicates that notification has been
sent.
●● [
] now changes to [
].
100
8
Access the page in the notification
message and complete camera link
settings.
●● From a computer or smartphone,
access the page linked in the notification
message.
●● Follow the instructions to complete the
settings on the camera link settings page.
9
Complete CANON iMAGE GATEWAY
settings on the camera.
●● Press the [ ][ ][ ][ ] buttons to choose
[
], and then press the [ ] button.
●● [ ] (= 108) and CANON iMAGE
GATEWAY are now added as
destinations.
●● You can add other Web services,
as needed. In this case, follow the
instructions from step 2 in “Registering
Other Web Services” (= 101).
Registering Other Web Services
1
Log in to CANON iMAGE GATEWAY
and access the camera link settings
page.
●● You can also change the camera nickname on the screen in step 1
(= 112).
●● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the menu. Press
the [ ][ ] buttons to access the device selection screen and then
configure the setting.
Basic Guide
Advanced Guide
Camera Basics
●● From a computer or smartphone, access
http://www.canon.com/cig/ to visit
CANON iMAGE GATEWAY.
2
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Configure the Web service you want
to use.
P Mode
●● On the computer or smartphone, display
the Web service settings screen.
Playback Mode
●● Follow the on-screen instructions to
complete settings for Web services you
want to use.
3
Choose [
●● Press the [
●● Make sure initially that your computer or smartphone mail
application is not configured to block email from relevant domains,
which may prevent you from receiving the notification message.
Before Use
You can also add Web services besides CANON iMAGE GATEWAY to the
camera.
Wi-Fi Functions
Setting Menu
].
Accessories
] button.
●● Press the [ ][ ][ ][ ] buttons to choose
[
], and then press the [ ] button.
●● The Web service settings are now
updated.
Appendix
Index
●● If any configured settings change, follow these steps again to
update the camera settings.
101
Uploading Images to Web Services
1
Access the Wi-Fi menu.
●● Press the [
2
] button.
Choose the destination.
●● Press the [ ][ ][ ][ ] buttons to choose
the icon of the Web service to connect to,
and then press the [ ] button.
●● If multiple recipients or sharing options
are used with a Web service, choose the
desired item on the [Select Recipient]
screen by pressing the [ ][ ] buttons,
and then press the [ ] button.
3
●● Press the [ ] button to return to the
playback screen once [OK] is displayed
after the image is sent.
●● Connections require that a memory card with saved images be in
the camera.
●● You can also send multiple images at once, resize images, and
add comments before sending (= 105).
●● You can send the current image by choosing [Send this image] on
the screen in step 3.
●● To view images uploaded to CANON iMAGE GATEWAY on a
smartphone, try the dedicated Canon Online Photo Album app.
Download and install the Canon Online Photo Album app for
iPhones or iPads from the App Store or for Android devices from
Google Play.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Send an image.
●● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
●● Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
Accessories
Appendix
Index
●● Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [
] button.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
●● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
●● When uploading to YouTube, read the
terms of service, choose [I Agree], and
press the [ ] button.
102
Printing Images Wirelessly from a
Connected Printer
Connect the camera to a printer via Wi-Fi to print as follows.
These steps show how to use the camera as an access point, but you can
also use an existing access point (= 93).
1
Access the Wi-Fi menu.
●● Press the [
] button.
4
Connect the printer to the network.
●● In the printer’s Wi-Fi setting menu,
choose the SSID (network name)
displayed on the camera to establish a
connection.
Before Use
Basic Guide
Advanced Guide
●● In the password field, enter the password
displayed on the camera.
5
Camera Basics
Choose the printer.
Auto Mode /
Hybrid Auto Mode
●● Press the [ ][ ] buttons to choose the
printer name, and then press the [ ]
button.
Other Shooting Modes
P Mode
2
Choose [
].
●● Press the [ ][ ][ ][ ] buttons to choose
[ ], and then press the [ ] button.
3
6
Playback Mode
Choose an image to print.
●● Press the [ ] button, choose [
press the [ ] button again.
Choose [Add a Device].
●● Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
●● The camera SSID and password are
displayed.
Wi-Fi Functions
●● Press the [ ][ ] buttons to choose an
image.
Setting Menu
], and
Accessories
●● Press the [ ][ ] buttons to choose
[Print], and then press the [ ] button.
●● For detailed printing instructions, see
“Printing Images” (= 127).
Appendix
Index
●● To end the connection, press the [ ]
button, press the [ ][ ] buttons on the
confirmation screen to choose [OK], and
then press the [ ] button.
103
●● Connections require that a memory card with saved images be in
the camera.
●● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●● If you prefer not to display recent target devices, choose MENU
(= 25) ► [ ] tab ► [Wireless settings] ► [Wi-Fi Settings] ►
[Target History] ► [Off].
●● To connect without entering a password in step 4, choose MENU
(= 25) ► [ ] tab ► [Wireless settings] ► [Wi-Fi Settings]
► [Password] ► [Off]. [Password] is no longer displayed on the
SSID screen (in step 3).
●● To use another access point, follow steps 3 – 4 in “Using Another
Access Point” (= 93).
Sending Images to Another Camera
Connect two cameras via Wi-Fi and send images between them as
follows.
Before Use
Basic Guide
Advanced Guide
●● Only Canon-brand cameras equipped with a Wi-Fi function can be
connected to wirelessly. You cannot connect to a Canon-brand camera
that does not have a Wi-Fi function, even if it supports Eye-Fi/FlashAir
cards.
1
Camera Basics
Auto Mode /
Hybrid Auto Mode
Access the Wi-Fi menu.
●● Press the [
Other Shooting Modes
] button.
P Mode
2
Choose [
Playback Mode
].
Wi-Fi Functions
●● Press the [ ][ ][ ][ ] buttons to choose
[ ], and then press the [ ] button.
Setting Menu
Accessories
3
Appendix
Choose [Add a Device].
●● Press the [ ][ ] buttons to choose [Add
a Device], and then press the [ ] button.
Index
●● Follow steps 1 – 3 on the target camera
too.
●● Camera connection information will be
added when [Start connection on target
camera] is displayed on both camera
screens.
104
4
Send an image.
●● Press the [ ][ ][ ][ ] buttons to choose
[Select and send], and then press the [ ]
button.
●● Press the [ ][ ] buttons to choose
[Select], and then press the [ ] button.
●● Press the [ ][ ][ ][ ] buttons to choose
an image to send, press the [ ] button to
mark it as selected ([ ]), and then press
the [
] button.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Image Sending Options
You can choose multiple images to send at once and change the image
recording pixel setting (size) before sending. Some Web services also
enable you to annotate the images you send.
Basic Guide
Advanced Guide
Camera Basics
Sending Multiple Images
Auto Mode /
Hybrid Auto Mode
On the image transfer screen, specify a range of images to send, or send
only images tagged as favorites.
1
●● Press the [ ][ ][ ][ ] buttons to choose
[Send], and then press the [ ] button.
Other Shooting Modes
Choose [Select and send].
P Mode
●● On the image transfer screen, press the
[ ][ ] buttons to choose [Select and
send], and then press the [ ] button.
●● [Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
●● To end the connection, press the
] button, press the [ ][ ] buttons
[
on the confirmation screen to choose
[OK], and then press the [ ] button.
●● Connections require that a memory card be in the camera.
●● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [ ][ ] buttons to
choose the device and then pressing the [ ] button. To add a
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●● If you prefer not to display recent target devices, choose MENU
(= 25) ► [ ] tab ► [Wireless settings] ► [Wi-Fi Settings] ►
[Target History] ► [Off].
●● You can also send multiple images at once and change the image
size before sending (= 105).
●● You can send the current image by choosing [Send this image] on
the screen in step 4.
Before Use
2
Playback Mode
Wi-Fi Functions
Setting Menu
Choose a selection method.
Accessories
●● Press the [ ][ ] buttons to choose a
selection method.
Appendix
Index
Selecting a Range
1
Choose [Select Range].
●● Following step 2 in “Sending Multiple
Images” (= 105), choose [Select
Range] and press the [ ] button.
105
2
Choose images.
●● Follow steps 2 – 3 in “Selecting a Range”
(= 73) to specify images.
●● To include movies, press the
[ ][ ][ ][ ] buttons to choose [Incl.
Movies], and then press the [ ] button to
mark the option as selected ( ).
●● Press the [ ][ ][ ][ ] buttons to choose
[OK], and then press the [ ] button.
3
Send the images.
●● Press the [ ][ ] buttons to choose
[Send], and then press the [ ] button.
●● Depending on the condition of the network you are using, it may take
a long time to send movies. Be sure to keep an eye on the camera
battery level.
Before Use
Basic Guide
Advanced Guide
●● Web services may limit the number of images or length of movies you
can send.
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● When sending movies to smartphones, note that the supported image
quality varies depending on the smartphone. For details, refer to the
smartphone user manual.
Other Shooting Modes
●● On the screen, wireless signal strength is indicated by the following
icons.
[ ] high, [ ] medium, [ ] low, [ ] weak
P Mode
Playback Mode
●● Sending images to Web services will take less time when resending
images you have already sent that are still on the CANON iMAGE
GATEWAY server.
Sending Favorite Images
Send only images tagged as favorites (= 78).
1
Notes on Sending Images
Wi-Fi Functions
Choose [Favorite Images].
Setting Menu
●● Following step 2 in “Sending Multiple
Images” (= 105), choose [Favorite
Images] and press the [ ] button.
●● An image selection screen for favorites is
displayed. If you prefer not to include an
image, choose the image and press the
[ ] button to remove [ ].
●● Press the [
Accessories
Appendix
Index
] button.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
2
Send the images.
●● Press the [ ][ ] buttons to choose
[Send], and then press the [ ] button.
●● In step 1, [Favorite Images] is not available unless you have
tagged images as favorites.
106
Choosing the Number of Recording Pixels
(Image Size)
On the image transfer screen, choose [ ] by pressing the [ ][ ]
buttons, and then press the [ ] button. On the screen displayed, choose
the recording pixel setting (image size) by pressing the [ ][ ] buttons,
and then press the [ ] button.
●● To send images at original size, select [No] as the resizing option.
●● Choosing [ ] will resize images that are larger than the selected size
before sending.
●● Movies cannot be resized.
●● Image size can also be configured in MENU (= 25) ► [ ] tab
► [Wireless settings] ► [Wi-Fi Settings] ► [Resize for Sending].
Before Use
Adding Comments
Using the camera, you can add comments to images that you send
to e-mail addresses, social networking services, etc. The number of
characters and symbols that can be entered may differ depending on the
Web service.
1
Basic Guide
Advanced Guide
Camera Basics
Access the screen for adding
comments.
Auto Mode /
Hybrid Auto Mode
●● On the image transfer screen, choose [ ]
by pressing the [ ][ ][ ][ ] buttons, and
then press the [ ] button.
2
3
Other Shooting Modes
P Mode
Add a comment (= 26).
Playback Mode
Send the image.
Wi-Fi Functions
●● When a comment is not entered, the comment set in CANON
iMAGE GATEWAY is automatically sent.
●● You can also annotate multiple images before sending them. The
same comment is added to all images sent together.
Setting Menu
Accessories
Appendix
Index
107
Sending Images Automatically
(Image Sync)
Images on the memory card that have not been transferred already can
be sent to a computer or Web services via CANON iMAGE GATEWAY.
Note that images cannot be sent only to Web services.
Initial Preparations
2
Choose the type of images to send
(only when sending movies with
images).
●● Press the [
] button, choose
[Wireless settings] on the [ ] tab, and
then choose [Wi-Fi Settings] (= 25).
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● Press the [ ][ ] buttons to choose
[Image Sync], and then press the [ ][ ]
buttons to choose [Stills/Movies].
Auto Mode /
Hybrid Auto Mode
Preparing the Computer
Preparing the Camera
Register [ ] as the destination. On the destination computer, you will
install and configure Image Transfer Utility, free software compatible with
Image Sync.
1
Add [ ] as a destination.
●● Add [ ] as a destination, as described in
“Registering CANON iMAGE GATEWAY”
(= 100).
●● To include a Web service as the
destination, log in to CANON iMAGE
GATEWAY (= 100), select your camera
model, access the Web service settings
screen, and choose the destination
Web service in Image Sync settings.
For details, refer to CANON iMAGE
GATEWAY Help.
Other Shooting Modes
Install and configure the software on the destination computer.
1
P Mode
Install Image Transfer Utility.
Playback Mode
●● Install Image Transfer Utility on a
computer connected to the Internet
(= 94).
Wi-Fi Functions
●● Image Transfer Utility can also be
downloaded from the Image Sync
settings page of CANON iMAGE
GATEWAY (= 108).
2
Setting Menu
Accessories
Register the camera.
●● Windows: In the taskbar, right-click [
and then click [Add new camera].
Appendix
],
Index
●● Mac OS: In the menu bar, click [ ],
and then click [Add new camera].
●● A list of cameras linked to CANON
iMAGE GATEWAY is displayed.
Choose the camera from which images
are to be sent.
●● Once the camera is registered and the
computer is ready to receive images,
the icon changes to [ ].
108
Viewing Images Sent via Image Sync on a Smartphone
Sending Images
Images sent from the camera are automatically saved to the computer.
If the computer that you intend to send images to is turned off, the images
will be stored temporarily on the CANON iMAGE GATEWAY server.
Stored images are regularly erased, so make sure to turn on the computer
and save the images.
1
Send images.
●● Follow steps 1 – 2 in “Uploading
Images to Web Services” (= 102) and
choose [ ].
●● Sent images are labeled with a [ ] icon.
2
Save the images to the computer.
●● Images are automatically saved to the
computer when you turn it on.
●● Images are automatically sent to Web
services from the CANON iMAGE
GATEWAY server, even if the computer
is off.
●● When sending images, you should use a fully charged battery
pack.
By installing the Canon Online Photo Album (Canon OPA) app, you can
use your smartphone to view and download images sent via Image Sync
while they are stored temporarily on the CANON iMAGE GATEWAY
server.
In preparation, enable smartphone access as follows.
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● Make sure you have completed the settings described in “Preparing
the Computer” (= 108).
Auto Mode /
Hybrid Auto Mode
●● Download and install the Canon Online Photo Album app for iPhones
or iPads from the App Store or for Android devices from Google Play.
Other Shooting Modes
●● Log in to CANON iMAGE GATEWAY (= 100), select your camera
model, access the Web service settings screen, and enable viewing
and downloading from a smartphone in the Image Sync settings.
For details, refer to CANON iMAGE GATEWAY Help.
P Mode
Playback Mode
●● Once images stored temporarily on the CANON iMAGE
GATEWAY server have been deleted, they can no longer be
viewed.
●● Images you sent before enabling smartphone viewing and
downloading in Image Sync settings cannot be accessed this way.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
●● For Canon Online Photo Album instructions, refer to Canon
Online Photo Album Help.
Index
●● Even if images were imported to the computer through a different
method, any images not sent to the computer via CANON iMAGE
GATEWAY will be sent to the computer.
●● Sending is faster when the destination is a computer on the same
network as the camera, because images are sent via the access
point instead of CANON iMAGE GATEWAY. Note that images
stored on the computer are sent to CANON iMAGE GATEWAY,
so the computer must be connected to the Internet.
109
Using a Smartphone to View Camera
Images and Control the Camera
You can do the following with the dedicated smartphone app Camera
Connect.
●● Browse images on the camera and save them to the smartphone
●● Geotag images on the camera (= 110)
●● Shoot remotely (= 110)
●● In camera settings, the smartphone must be allowed to view
camera images (= 91, = 111).
Geotagging Images on the Camera
GPS data recorded on a smartphone using the dedicated Camera
Connect application can be added to images on the camera. Images are
tagged with information including the latitude, longitude, and elevation.
●● Before shooting, make sure the date and time and your home
time zone are set correctly, as described in “Setting the Date and
Time” (= 17). Also follow the steps in “World Clock” (= 115)
to specify any shooting destinations in other time zones.
●● Others may be able to locate or identify you by using location data
in your geotagged still images or movies. Be careful when sharing
these images with others, as when posting images online where
many others can view them.
Before Use
Shooting Remotely
As you check a shooting screen on your smartphone, you can use it to
shoot remotely.
1
Basic Guide
Advanced Guide
Secure the camera.
Camera Basics
●● Once remote shooting begins, the
camera lens will come out. Lens motion
from zooming may also move the camera
out of position. Keep the camera still by
mounting it on a tripod or taking other
measures.
2
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Connect the camera and
smartphone (= 91).
Playback Mode
●● In the privacy settings, choose [Yes].
3
Wi-Fi Functions
Choose remote shooting.
Setting Menu
●● In Camera Connect on the smartphone,
choose remote shooting.
Accessories
●● The camera lens will come out. Keep
your fingers away from the lens, and
make sure no objects will obstruct it.
●● Once the camera is ready for remote
shooting, a live image from the camera
will be displayed on the smartphone.
Appendix
Index
●● At this time, a message is displayed on
the camera, and all operations except
pressing the ON/OFF button are disabled.
4
Shoot.
●● Use the smartphone to shoot.
110
●● The camera works in [ ] mode during remote shooting. However,
some FUNC. and MENU settings you have configured in advance
may be changed automatically.
●● Movie shooting is not available.
Before Use
Editing or Erasing Wi-Fi Settings
Basic Guide
Edit or erase Wi-Fi settings as follows.
Advanced Guide
Editing Connection Information
●● Any jerky subject motion shown on the smartphone due to the
connection environment will not affect recorded images.
●● No AF frames are displayed. Capture a test image to check the
focus.
●● Captured images are not transferred to the smartphone. Use the
smartphone to browse and import images from the camera.
1
Camera Basics
Auto Mode /
Hybrid Auto Mode
Access the Wi-Fi menu and choose
a device to edit.
●● Press the [
Other Shooting Modes
] button.
●● Press the [ ][ ] buttons to access
the device selection screen, press the
[ ][ ][ ][ ] buttons to choose the icon
of a device to edit, and then press the
[ ] button.
2
P Mode
Playback Mode
Wi-Fi Functions
Choose [Edit a Device].
Setting Menu
●● Press the [ ][ ] buttons to choose [Edit
a Device], and then press the [ ] button.
Accessories
Appendix
3
Index
Choose the device to edit.
●● Press the [ ][ ] buttons to choose the
device to edit, and then press the [ ]
button.
4
Choose the item to edit.
●● Press the [ ][ ] buttons to choose
the item to edit, and then press the [
button.
]
●● The items you can change depend on the
device or service.
111
Changing the Camera Nickname
Connection
Configurable Items
Web
Services
[Change Device Nickname] (= 112)
O
O
O
O
–
[View Settings] (= 91)
–
O
–
–
–
[Erase Connection Info] (= 112)
O
O
O
O
–
O : Configurable
– : Not configurable
Changing a Device Nickname
You can change the device nickname (display name) that is displayed on
the camera.
●● Following step 4 in “Editing Connection
Information” (= 111), choose [Change
Device Nickname] and press the [ ]
button.
●● Select the input field and press the [ ]
button. Use the keyboard displayed to
enter a new nickname (= 26).
Erasing Connection Information
Change the camera nickname (displayed on connected devices) as desired.
1
Choose [Wireless settings].
●● After [Erase?] is displayed, press the
[ ][ ] buttons to choose [OK], and then
press the [ ] button.
●● The connection information will be
erased.
Basic Guide
Advanced Guide
●● Press the [
] button and choose
[Wireless settings] on the [ ] tab
(= 25).
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
2
Choose [Nickname].
P Mode
●● Press the [ ][ ] buttons to choose
[Nickname], and then press the [ ]
button.
Playback Mode
Wi-Fi Functions
3
Setting Menu
Change the nickname.
Accessories
●● Press the [ ] button to access the
keyboard (= 26), and then enter a
nickname.
Erase connection information (information about devices that you have
connected to) as follows.
●● Following step 4 in “Editing Connection
Information” (= 111), choose [Erase
Connection Info] and press the [ ]
button.
Before Use
Appendix
Index
●● A message is displayed if the nickname you enter begins with
a symbol or space. Press the [ ] button and enter a different
nickname.
●● You can also change the nickname from the [Device Nickname]
screen displayed when you first use Wi-Fi. In this case, select the
text box, press the [ ] button to access the keyboard, and then
enter a new nickname.
112
Before Use
Returning the Wi-Fi Settings to Default
Basic Guide
Return the Wi-Fi settings to default if you transfer ownership of the
camera to another person, or dispose of it.
Resetting the Wi-Fi settings will also clear all Web service settings.
Be sure that you want to reset all Wi-Fi settings before using this option.
1
Advanced Guide
Camera Basics
Choose [Wireless settings].
Auto Mode /
Hybrid Auto Mode
●● Press the [
] button and choose
[Wireless settings] on the [ ] tab
(= 25).
Other Shooting Modes
P Mode
2
●● Press the [ ][ ] buttons to choose
[Reset Settings], and then press the [
button.
3
Playback Mode
Choose [Reset Settings].
Wi-Fi Functions
]
Setting Menu
Accessories
Restore the default settings.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
●● The Wi-Fi settings are now reset.
Appendix
Index
●● To reset other settings (aside from Wi-Fi) to defaults, choose
[Reset All] on the [ ] tab (= 120).
113
Before Use
Adjusting Basic Camera Functions
Basic Guide
MENU (= 25) functions on the [ ] tab can be configured. Customize
commonly used functions as desired, for greater convenience.
Setting Menu
Advanced Guide
Silencing Camera Operations
Camera Basics
Auto Mode /
Hybrid Auto Mode
Silence camera sounds and movies as follows.
●● Choose [Mute], and then choose [On].
Other Shooting Modes
Customize or adjust basic camera functions for greater convenience
P Mode
Playback Mode
Wi-Fi Functions
●● Operation can also be silenced by holding down the [ ] button
as you turn the camera on.
●● Sound is not played during movies (= 64) if you mute camera
sounds. To restore sound during movies, press the [ ] button.
Adjust volume with the [ ][ ] buttons, as needed.
Setting Menu
Accessories
Appendix
Index
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
●● Choose [Volume], and then press the [
button.
]
●● Choose an item, and then press the
[ ][ ] buttons to adjust the volume.
114
Before Use
Hiding Hints and Tips
World Clock
Hints and tips are normally shown when you choose FUNC. (= 24) or
MENU (= 25) items. If you prefer, you can deactivate this information.
To ensure that your shots will have the correct local date and time when
you travel abroad, simply register the destination in advance and switch to
that time zone. This convenient feature eliminates the need to change the
Date/Time setting manually.
Before using the world clock, be sure to set the date and time and your
home time zone, as described in “Setting the Date and Time” (= 17).
●● Choose [Hints & Tips], and then choose
[Off].
1
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Specify your destination.
Other Shooting Modes
●● Choose [Time Zone], and then press the
[ ] button.
P Mode
●● Press the [ ][ ] buttons to choose
[ World], and then press the [ ] button.
Date and Time
Adjust the date and time as follows.
●● Choose [Date/Time], and then press the
[ ] button.
●● Press the [ ][ ] buttons to choose an
item, and then press the [ ][ ] buttons
to adjust the setting.
Playback Mode
●● Press the [ ][ ] buttons to choose the
destination.
Wi-Fi Functions
●● To set daylight saving time (1 hour
ahead), choose [ ] by pressing the
[ ][ ] buttons, and then choose [ ] by
pressing the [ ][ ] buttons.
●● Press the [
2
Setting Menu
Accessories
] button.
Appendix
Switch to the destination time zone.
●● Press the [ ][ ] buttons to choose
[ World], and then press the [
button.
]
Index
●● [ ] is now shown on the shooting screen
(= 140).
●● Adjusting the date or time while in [ ] mode (= 18) will
automatically update your [ Home] time and date.
115
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press
the [
] button in Shooting mode (= 22). To have the lens retracted
immediately after you press the [
] button, set the retraction timing to
[0 sec.].
●● Choose [Lens Retraction], and then
choose [0 sec.].
2
Shoot.
●● To activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter button
halfway.
Before Use
Basic Guide
Advanced Guide
Power-Saving Adjustment
Camera Basics
Auto Mode /
Hybrid Auto Mode
Adjust the timing of automatic camera and screen deactivation (Auto
Power Down and Display Off, respectively) as needed (= 23).
Other Shooting Modes
●● Choose [Power Saving], and then press
the [ ] button.
P Mode
●● After choosing an item, press the [ ][ ]
buttons to adjust it as needed.
Playback Mode
Using Eco Mode
Wi-Fi Functions
This function allows you to conserve battery power in Shooting mode.
When the camera is not in use, the screen quickly darkens to reduce
battery consumption.
1
Setting Menu
●● To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
Accessories
Configure the setting.
●● Choose [Eco Mode], and then choose
[On].
] is now shown on the shooting
●● [
screen (= 140).
●● The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
●● The [Display Off] setting is applied even if you set [Auto Power
Down] to [Off].
●● These power-saving functions are not available when you have
set Eco mode (= 116) to [On].
Appendix
Index
116
Screen Brightness
Formatting Memory Cards
Adjust screen brightness as follows.
Before using a new memory card or a card formatted in another device,
you should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy
images on the memory card to a computer, or take other steps to back
them up.
●● Choose [Disp. Brightness], and then
press the [ ][ ] buttons to adjust the
brightness.
1
Hiding the Start-Up Screen
If you prefer, you can deactivate display of the start-up screen normally
shown when you turn the camera on.
●● Choose [Start-up Image], and then
choose [Off].
2
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Access the [Format] screen.
●● Choose [Format], and then press the [
button.
●● For maximum brightness, press and hold the [ ] button for at
least one second when the shooting screen is displayed or when
in single-image display. (This will override the [Disp. Brightness]
setting on the [ ] tab.) To restore the original brightness, press
and hold the [ ] button again for at least one second or restart
the camera.
Before Use
]
Other Shooting Modes
Choose [OK].
P Mode
●● Press the [ ][ ] buttons to choose
[Cancel], press the [ ][ ] buttons to
choose [OK], and then press the [ ]
button.
3
Playback Mode
Wi-Fi Functions
Setting Menu
Format the memory card.
Accessories
●● To begin the formatting process, press
the [ ][ ] buttons to choose [OK], and
then press the [ ] button.
●● When formatting is finished, [Memory
card formatting complete] is displayed.
Press the [ ] button.
Appendix
Index
●● Formatting or erasing data on a memory card only changes file
management information on the card and does not erase the data
completely. When transferring or disposing of memory cards,
take steps to protect personal information if necessary, as by
physically destroying cards.
●● The total card capacity indicated on the formatting screen may be
less than the advertised capacity.
117
Low-Level Formatting
Perform low-level formatting in the following cases: [Memory card error] is
displayed, the camera is not working correctly, card image reading/writing
is slower, continuous shooting is slower, or movie recording suddenly
stops. Low-level formatting erases all data on a memory card. Before
low‑level formatting, copy images on the memory card to a computer, or
take other steps to back them up.
Your shots are automatically numbered in sequential order (0001 – 9999)
and saved in folders that store up to 2,000 images each. You can change
how the camera assigns file numbers.
●● Low-level formatting takes longer than “Formatting Memory
Cards” (= 117), because data is erased from all storage regions
of the memory card.
●● You can cancel low-level formatting in progress by choosing
[Stop]. In this case, all data will be erased, but the memory card
can be used normally.
Basic Guide
Advanced Guide
●● Choose [File Numbering], and then
choose an option.
●● On the screen in step 2 of “Formatting
Memory Cards” (= 117), press the
[ ][ ] buttons to choose [Low Level
Format], and then press the [ ][ ]
buttons to select this option. A [ ] icon is
displayed.
●● Follow steps 2 – 3 in “Formatting Memory
Cards” (= 117) to continue with the
formatting process.
Before Use
File Numbering
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Continuous
Images are numbered consecutively (until the 9999th
shot is taken/saved) even if you switch memory cards.
Playback Mode
Auto Reset
Image numbering is reset to 0001 if you switch memory
cards, or when a new folder is created.
Wi-Fi Functions
Setting Menu
●● Regardless of the option selected in this setting, shots may be
numbered consecutively after the last number of existing images
on newly inserted memory cards. To start saving shots from 0001,
use an empty (or formatted, = 117) memory card.
Accessories
Appendix
Index
118
Before Use
Date-Based Image Storage
Checking Certification Logos
Instead of saving images in folders created each month, you can have the
camera create folders each day you shoot to store shots taken that day.
Some logos for certification requirements met by the camera can be
viewed on the screen. Other certification logos are printed in this guide, on
the camera packaging, or on the camera body.
●● Choose [Create Folder], and then choose
[Daily].
Basic Guide
Advanced Guide
●● Choose [Certification Logo Display], and
then press the [ ] button.
●● Images will now be saved in folders
created on the shooting date.
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Metric / Non-Metric Display
Change the unit of measurement shown in GPS elevation information
(= 110), the zoom bar (= 28), and elsewhere from m/cm to ft/in as
needed.
●● Choose [Units], and then choose [ft/in].
P Mode
Display Language
Playback Mode
Change the display language as needed.
●● Choose [Language
the [ ] button.
Wi-Fi Functions
], and then press
Setting Menu
●● Press the [ ][ ][ ][ ] buttons to choose
a language, and then press the [ ]
button.
Accessories
Appendix
Index
●● You can also access the [Language
] screen in Playback mode
by pressing and holding the [ ] button and immediately pressing
] button.
the [
119
Before Use
Adjusting Other Settings
The following settings can also be adjusted on the [
] tab.
●● [Video System]
Basic Guide
Advanced Guide
●● [Wireless settings] (= 87)
Camera Basics
Restoring Default Camera Settings
Auto Mode /
Hybrid Auto Mode
If you accidentally change a setting, you can restore default camera
settings.
1
Other Shooting Modes
P Mode
Access the [Reset All] screen.
●● Choose [Reset All], and then press the
[ ] button.
2
Playback Mode
Wi-Fi Functions
Restore default settings.
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Setting Menu
●● Default settings are now restored.
Accessories
Appendix
●● The following functions are not restored to default settings.
-- [ ] tab settings [Date/Time] (= 115), [Time Zone] (= 115),
] (= 119), and [Video System]
[Language
-- Custom white balance data you have recorded (= 56)
-- Shooting Mode
-- Wi-Fi settings (= 87)
Index
120
Before Use
System Map
Basic Guide
Included Accessories
Advanced Guide
Accessories
Wrist Strap
Battery Pack
NB-13L*1
Camera Basics
Battery Charger
CB-2LH/CB-2LHE*1
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
USB Cable (camera end: Micro-B)*2
Enjoy the camera in more ways with optional Canon accessories and
other compatible accessories sold separately
P Mode
Memory Card
Card Reader
Playback Mode
Computer
PictBridge-Compatible Printers
HDMI Cable (camera end: Type D)*3
Flash Unit
Wi-Fi Functions
Setting Menu
TV/Video
System
Accessories
Appendix
Index
Connect Station
CS100*4
*1
*2
*3
*4
High-Power Flash
HF-DC2
Also available for purchase separately.
A genuine Canon accessory is also available (Interface Cable IFC-600PCU).
Use a commercially available cable no longer than 2.5 m (8.2 ft.).
Use the latest firmware.
121
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used
with genuine Canon accessories.
Canon shall not be liable for any damage to this product and/or accidents
such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please
note that this warranty does not apply to repairs arising out of the
malfunction of non-genuine Canon accessories, although you may request
such repairs on a chargeable basis.
Optional Accessories
The following camera accessories are sold separately. Note that
availability varies by area, and some accessories may no longer be
available.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Power Supplies
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Battery Pack NB-13L
●● Rechargeable lithium-ion battery
P Mode
Battery Charger CB-2LH/CB-2LHE
Playback Mode
●● Charger for Battery Pack NB-13L.
Wi-Fi Functions
●● The message [Battery communication error] is displayed if you
use a non-genuine Canon battery pack, and user response is
required. Note that Canon shall not be liable for any damages
resulting from accidents, such as malfunction or fire, that occur
due to use of non-genuine Canon battery packs.
Setting Menu
Accessories
Appendix
●● The battery pack includes a convenient cover which you can
attach to know the charge status at a glance. Attach the cover so
is visible on a charged battery pack, and attach it so that
that
is not visible on an uncharged battery pack.
Index
122
Flash Unit
Photo and Movie Storage
Before Use
Basic Guide
High-Power Flash HF-DC2
●● External flash for illuminating subjects
that are out of range of the built-in flash.
Connect Station CS100
Advanced Guide
●● A media hub for storing camera images,
viewing on a connected TV, printing
wirelessly on a Wi-Fi-compatible printer,
sharing over the Internet, and more.
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Accessories
Other Shooting Modes
P Mode
Interface Cable IFC-600PCU
Playback Mode
●● For connecting the camera to a computer
or printer.
Wi-Fi Functions
Setting Menu
Printers
Accessories
Canon-Brand PictBridge-Compatible
Printers
●● Even without using a computer, you can
print images by connecting the camera
directly to a printer.
For details, visit your nearest Canon
retailer.
Appendix
Index
123
●● On the camera, open the terminal cover
and insert the cable plug fully into the
camera terminal.
Using Optional Accessories
Before Use
Basic Guide
Advanced Guide
Playback on a TV
Still Images
Camera Basics
Movies
By connecting the camera to a TV, you can view your shots on the larger
screen of the TV.
For details on connection or how to switch inputs, refer to the TV manual.
●● Some information may not be displayed when viewing images on
a TV (= 141).
Playback on a High-Definition TV
You can view your shots on a TV by connecting the camera to an HDTV
with a commercially available HDMI cable (not exceeding 2.5 m / 8.2 ft.,
with a Type D terminal on the camera end). Movies shot at an image
quality of [ ] or [ ] can be viewed in high definition.
1
Make sure the camera and TV are
off.
2
Connect the camera to the TV.
●● On the TV, insert the cable plug fully into
the HDMI input as shown.
3
Auto Mode /
Hybrid Auto Mode
Turn the TV on and switch to
external input.
Other Shooting Modes
●● Switch the TV input to the external input
you connected the cable to in step 2.
4
P Mode
Playback Mode
Turn the camera on.
●● Press the [
on.
] button to turn the camera
Wi-Fi Functions
●● Images from the camera are now
displayed on the TV. (Nothing is
displayed on the camera screen.)
Setting Menu
Accessories
●● When finished, turn off the camera and
TV before disconnecting the cable.
●● Camera operating sounds are not played while the camera is
connected to an HDTV.
Appendix
Index
124
Using the Software
To utilize the features of the following software, download the software
from the Canon website and install it on your computer.
●● CameraWindow
-- Import images to your computer
●● Image Transfer Utility
-- Set up Image Sync (= 108) and receive images
●● Map Utility
-- Use a map to view GPS information that has been added to images
●● To view and edit images on a computer, use preinstalled or
commonly available software compatible with images captured by
the camera.
Computer Connections via a Cable
Checking Your Computer Environment
For detailed software system requirements and compatibility information
(including support in new operating systems), visit the Canon website.
Before Use
Installing the Software
Windows 7 and Mac OS X 10.9 are used here for the sake of illustration.
1
Download the software.
Basic Guide
Advanced Guide
●● With a computer connected to the Internet,
access http://www.canon.com/icpd/.
Camera Basics
●● Access the site for your country or region.
Auto Mode /
Hybrid Auto Mode
●● Download the software.
2
Other Shooting Modes
Install the software.
P Mode
●● Click [Easy Installation] and follow the
on-screen instructions to complete the
installation process. Installation may
take some time, depending on computer
performance and the Internet connection.
Playback Mode
Wi-Fi Functions
●● Click [Finish] or [Restart] on the screen
after installation.
Setting Menu
Accessories
●● Internet access is required, and any ISP account charges and
access fees must be paid separately.
Appendix
●● To uninstall the software, follow these steps.
-- Windows: Select [Start] menu ► [All Programs] ► [Canon
Utilities], and then choose the software for uninstallation.
-- Mac OS: In the [Canon Utilities] folder within the [Applications]
folder, drag the folder of the software for uninstallation to the
Trash, and then empty the Trash.
Index
125
●● Choose [Downloads Images From Canon
Camera] and then click [OK].
Saving Images to a Computer
Using a USB cable (sold separately; camera end: Micro-B), you can
connect the camera to the computer and save images to the computer.
1
(2)
(1)
Basic Guide
Advanced Guide
Connect the camera to the
computer.
●● With the camera turned off, open the
cover (1). With the smaller plug of the
USB cable in the orientation shown,
insert the plug fully into the camera
terminal (2).
●● Insert the larger plug of the USB cable
in the computer’s USB port. For details
about USB connections on the computer,
refer to the computer user manual.
2
Before Use
Turn the camera on to access
CameraWindow.
●● Press the [
on.
] button to turn the camera
●● Mac OS: CameraWindow is displayed
when a connection is established
between the camera and computer.
Camera Basics
●● Double-click [
Auto Mode /
Hybrid Auto Mode
].
Other Shooting Modes
3
P Mode
Save the images to the computer.
●● Click [Import Images from Camera], and
then click [Import Untransferred Images].
Playback Mode
●● Images are now saved to the Pictures
folder on the computer, in separate
folders named by date.
Wi-Fi Functions
Setting Menu
●● After images are saved, close
] button to
CameraWindow, press the [
turn the camera off, and unplug the cable.
●● To view images you save to a computer,
use preinstalled or commonly available
software compatible with images
captured by the camera.
Accessories
Appendix
Index
●● Windows: Follow the steps introduced
below.
●● In the screen that is displayed, click the
].
change program link of [
126
●● Windows 7: If the screen in step 2 is not displayed, click the [ ]
icon in the taskbar.
●● Mac OS: If CameraWindow is not displayed after step 2, click the
[CameraWindow] icon in the Dock.
●● Although you can save images to a computer simply by
connecting your camera to the computer without using the
software, the following limitations apply.
-- It may take a few minutes after you connect the camera to the
computer until camera images are accessible.
-- Images shot in vertical orientation may be saved in horizontal
orientation.
-- Image protection settings may be cleared from images saved
to a computer.
-- Some problems may occur when saving images or image
information, depending on the operating system version,
the software in use, or image file sizes.
Before Use
Printing Images
Your shots can easily be printed by connecting the camera to a printer.
On the camera, you can specify images to set up batch printing, prepare
orders for photo development services, and prepare orders or print
images for photobooks.
A Canon SELPHY CP series compact photo printer is used here for the
sake of illustration. Screens displayed and available functions vary by
printer. Also refer to the printer manual for additional information.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Easy Print
Still Images
P Mode
Movies
Print your shots by connecting the camera to a PictBridge-compatible
printer with a USB cable (sold separately; camera end: Micro-B).
1
Make sure the camera and printer
are off.
2
Connect the camera to the printer.
●● Open the terminal cover. Holding the
smaller cable plug in the orientation
shown, insert the plug fully into the
camera terminal.
●● Connect the larger cable plug to the
printer. For other connection details, refer
to the printer manual.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
127
3
4
Turn the printer on.
Turn the camera on.
●● Press the [
on.
5
Still Images
] button to turn the camera
1
2
], and
Default
Date
File No.
7
Access the printing screen.
Basic Guide
Advanced Guide
Both
Print the image.
Off
●● Press the [ ][ ] buttons to choose
[Print], and then press the [ ] button.
Default
P Mode
Playback Mode
Prints images with the date added.
Prints images with the file number added.
Wi-Fi Functions
Prints images with both the date and file
number added.
Setting Menu
–
Accessories
Matches current printer settings.
Off
–
On
Uses information from the time of shooting to
print under optimal settings.
Red-Eye1 Corrects red-eye.
No. of
Copies
Other Shooting Modes
Matches current printer settings.
●● To print other images, repeat the above
procedures starting from step 5 after
printing is finished.
●● For Canon-brand PictBridge-compatible printers (sold separately),
see “Printers” (= 123).
Auto Mode /
Hybrid Auto Mode
Configure the settings.
●● Printing now begins.
●● When you are finished printing, turn the
camera and printer off and disconnect
the cable.
Camera Basics
●● Press the [ ][ ] buttons to choose an
item, and then press the [ ][ ] buttons to
choose an option.
Access the printing screen.
●● Press the [ ] button, choose [
press the [ ] button again.
Movies
●● Follow steps 1 – 6 in “Easy Print”
(= 127) to access this screen.
Choose an image.
●● Press the [ ][ ] buttons to choose an
image.
6
Before Use
Configuring Print Settings
Appendix
Index
Choose the number of copies to print.
Cropping
–
Specify a desired image area to print (= 129).
Paper
Settings
–
Specify the paper size, layout, and other details
(= 129).
128
Cropping Images before Printing
Choosing Paper Size and Layout before Printing
By cropping images before printing, you can print a desired image area
instead of the entire image.
1
Choose [Cropping].
●● After following step 1 in “Configuring Print
Settings” (= 128) to access the printing
screen, choose [Cropping] and press the
[ ] button.
●● A cropping frame is now displayed,
indicating the image area to print.
2
Adjust the cropping frame as
needed.
1
Choose [Paper Settings].
●● After following step 1 in “Configuring Print
Settings” (= 128) to access the printing
screen, choose [Paper Settings] and
press the [ ] button.
2
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Choose a paper size.
Other Shooting Modes
●● Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
P Mode
Playback Mode
●● To resize the frame, move the zoom
lever.
●● To move the frame, press the
[ ][ ][ ][ ] buttons.
●● To rotate the frame, press the [
3
] button.
] button, press the
●● Press the [
[ ][ ] buttons to choose [OK], and then
press the [ ] button.
3
Print the image.
●● Follow step 7 in “Easy Print” (= 127)
to print.
●● Cropping may not be possible at small image sizes, or at some
aspect ratios.
●● Dates may not be printed correctly if you crop images shot with
] selected.
[Date Stamp
Wi-Fi Functions
Choose a type of paper.
Setting Menu
●● Press the [ ][ ] buttons to choose an
option, and then press the [ ] button.
Accessories
Appendix
4
Choose a layout.
●● Press the [
option.
][
Index
] buttons to choose an
●● When choosing [N-up], press the [ ][ ]
buttons to specify the number of images
per sheet.
●● Press the [
5
] button.
Print the image.
129
Available Layout Options
Default
Matches current printer settings.
Bordered
Prints with blank space around the image.
Borderless
Borderless, edge-to-edge printing.
N-up
Choose how many images to print per sheet.
ID Photo
Prints images for identification purposes.
Only available for images with a recording pixel setting of L
and an aspect ratio of 4:3.
Fixed Size
Choose the print size.
Choose from 3.5 x 5 in., postcard, or wide-format prints.
Still Images
1
2
2
Choose the long and short side
length.
●● Press the [ ][ ] buttons to choose an
item. Choose the length by pressing the
[ ][ ] buttons, and then press the [ ]
button.
3
Choose the printing area.
●● Follow step 2 in “Cropping Images before
Printing” (= 129) to choose the printing
area.
4
Basic Guide
Advanced Guide
Access the printing screen.
3
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Choose a printing method.
●● Press the [ ][ ] buttons to choose [
and then press the [ ][ ] buttons to
choose the printing method.
Choose [ID Photo].
●● Following steps 1 – 4 in “Choosing
Paper Size and Layout before Printing”
(= 129), choose [ID Photo] and press
the [ ] button.
Movies
●● Follow steps 1 – 6 in “Easy Print”
(= 127) to choose a movie. This screen
is displayed.
Printing ID Photos
1
Before Use
Printing Movie Scenes
P Mode
],
Playback Mode
Print the image.
Wi-Fi Functions
Setting Menu
Movie Printing Options
Single
Accessories
Prints the current scene as a still image.
Prints a series of scenes, a certain interval apart, on a single
sheet of paper. You can also print the folder number, file
Sequence
number, and elapsed time for the frame by setting [Caption]
to [On].
Appendix
Index
●● To cancel printing in progress, press the [ ] button, choose [OK],
and then press the [ ] button again.
●● After displaying a scene to print as described in steps 2 – 5 of
“Viewing” (= 64), you can also access the screen in step 1
here by pressing the [ ][ ] buttons to choose [ ] in the movie
control panel and then pressing the [ ] button.
Print the image.
130
Adding Images to the Print List (DPOF)
Still Images
Movies
Batch printing (= 132) and ordering prints from a photo development
service can be set up on the camera. Choose up to 998 images on a
memory card and configure relevant settings, such as the number of
copies, as follows. The printing information you prepare this way will
conform to DPOF (Digital Print Order Format) standards.
Configuring Print Settings
Specify the printing format, whether to add the date or file number, and
other settings as follows. These settings apply to all images in the print
list.
●● Press the [
] button, and then
choose [Print Settings] on the [ ] tab.
Choose and configure items as desired
(= 25).
●● Not all of your DPOF settings may be applied in printing by the
printer or photo development service, in some cases.
●● [ ] may be displayed on the camera to warn you that the
memory card has print settings that were configured on another
camera. Changing the print settings using this camera may
overwrite all previous settings.
Print Type
Date
File No.
Clear DPOF
data
One image is printed per sheet.
Index
Smaller versions of multiple images are
printed per sheet.
Both
Both standard and index formats are printed.
On
Images are printed with the shooting date.
Off
–
On
Images are printed with the file number.
Off
–
On
All image print list settings are cleared after
printing.
Off
–
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● Specifying [Index] will prevent you from choosing [On] for both
[Date] and [File No.] at the same time.
●● Index printing is not available on some Canon-brand PictBridgecompatible printers (sold separately).
●● The date is printed in a format matching setting details in [Date/
Time] on the [ ] tab (= 17).
Other Shooting Modes
P Mode
Playback Mode
Setting Up Printing for Individual Images
1
Standard
Before Use
Wi-Fi Functions
Choose [Select Images & Qty.].
Setting Menu
●● Press the [
] button, choose
[Select Images & Qty.] on the [ ] tab,
and then press the [ ] button.
Accessories
2
Appendix
Choose an image.
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
Index
●● You can now specify the number of
copies.
●● If you specify index printing for the image,
it is labeled with a [ ] icon. To cancel
index printing for the image, press
the [ ] button again. [ ] is no longer
displayed.
131
3
Clearing All Images from the Print List
Specify the number of prints.
●● Press the [ ][ ] buttons to specify the
number of prints (up to 99).
●● To set up printing for other images and
specify the number of prints, repeat
steps 2 – 3.
●● Printing quantity cannot be specified for
index prints. You can only choose which
images to print, by following step 2.
●● When finished, press the [
to return to the menu screen.
] button
Setting Up Printing for a Range of Images
●● Following step 1 in “Setting Up Printing
for Individual Images” (= 131), choose
[Select Range] and press the [ ] button.
●● Follow steps 2 – 3 in “Selecting a Range”
(= 73) to specify images.
●● Press the [ ][ ] buttons to choose
[Order], and then press the [ ] button.
●● Following step 1 in “Setting Up Printing
for Individual Images” (= 131), choose
[Clear All Selections] and press the [ ]
button.
Before Use
Basic Guide
Advanced Guide
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Camera Basics
Auto Mode /
Hybrid Auto Mode
Printing Images Added to the Print List (DPOF)
Other Shooting Modes
●● When images have been added to the
print list (= 131 – = 132), this screen
is displayed after you connect the camera
to a PictBridge-compatible printer. Press
the [ ][ ] buttons to choose [Print now],
and then simply press the [ ] button to
print the images in the print list.
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
●● Any DPOF print job that you temporarily
stop will be resumed from the next image.
Accessories
Setting Up Printing for All Images
●● Following step 1 in “Setting Up Printing
for Individual Images” (= 131), choose
[Select All Images] and press the [ ]
button.
Appendix
Index
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
132
2
Adding Images to a Photobook
Still Images
Movies
Photobooks can be set up on the camera by choosing up to 998 images
on a memory card and importing them into the software on your computer,
where they are stored in their own folder. This is convenient when
ordering printed photobooks online or printing photobooks with your own
printer.
Choosing a Selection Method
●● Press the [
] button, choose
[Photobook Set-up] on the [
] tab, and
then choose how you will select images.
Choose an image.
Before Use
●● Press the [ ][ ] buttons to choose an
image, and then press the [ ] button.
●● [
] is displayed.
●● To remove the image from the photobook,
press the [ ] button again. [ ] is no
longer displayed.
Basic Guide
Advanced Guide
Camera Basics
●● Repeat this process to specify other
images.
●● When finished, press the [
to return to the menu screen.
Auto Mode /
Hybrid Auto Mode
] button
Other Shooting Modes
P Mode
Adding All Images to a Photobook
Playback Mode
●● Following the procedure in “Choosing
a Selection Method” (= 133), choose
[Select All Images] and press the [ ]
button.
●● [ ] may be displayed on the camera to warn you that the
memory card has print settings that were configured on another
camera. Changing the print settings using this camera may
overwrite all previous settings.
Wi-Fi Functions
Setting Menu
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
Accessories
Appendix
Removing All Images from a Photobook
Adding Images Individually
1
Choose [Select].
●● Following the procedure in “Choosing
a Selection Method” (= 133), choose
[Select] and press the [ ] button.
●● Following the procedure in “Choosing
a Selection Method” (= 133), choose
[Clear All Selections] and press the [ ]
button.
Index
●● Press the [ ][ ] buttons to choose [OK],
and then press the [ ] button.
133
Troubleshooting
If you think there is a problem with the camera, first check the following.
If the items below do not solve your problem, contact a Canon Customer
Support Help Desk.
Appendix
Before Use
Basic Guide
Advanced Guide
Camera Basics
Power
Auto Mode /
Hybrid Auto Mode
Nothing happens when the ON/OFF button is pressed.
Helpful information when using the camera
●●
●●
●●
●●
Confirm that the battery pack is charged (= 16).
Confirm that the battery pack is inserted facing the correct way (= 16).
Confirm that the memory card/battery cover is fully closed (= 16).
Dirty battery terminals reduce battery performance. Try cleaning the terminals
with a cotton swab and reinserting the battery pack a few times.
Other Shooting Modes
P Mode
Playback Mode
The battery pack runs out of power quickly.
●● Battery performance decreases at low temperatures. Try warming the battery
pack a little by putting it in your pocket, for example, ensuring that the terminals
do not touch any metal objects.
●● Dirty battery terminals reduce battery performance. Try cleaning the terminals
with a cotton swab and reinserting the battery pack a few times.
●● If these measures do not help and the battery pack still runs out of power soon
after charging, it has reached the end of its life. Purchase a new battery pack.
Wi-Fi Functions
Setting Menu
Accessories
The lens is not retracted.
●● Do not open the memory card/battery cover while the camera is on. Close the
cover, turn the camera on, and then turn it off again (= 16).
The battery pack is swollen.
Appendix
Index
●● Battery swelling is normal and does not pose any safety concerns. However, if
battery swelling prevents the battery pack from fitting in the camera, contact a
Canon Customer Support Help Desk.
Display on a TV
Camera images look distorted or are not displayed on a TV (= 124).
134
Subjects in shots look too dark.
Shooting
●● In Playback mode (= 64), press the shutter button halfway (= 23).
●●
●●
●●
●●
Strange display on the screen under low light (= 24).
Subjects look too bright, highlights are washed-out.
Cannot shoot.
●●
●●
●●
●●
Strange display on the screen when shooting.
●● Note that the following display problems are not recorded in still images but are
recorded in movies.
-- The screen may flicker and horizontal banding may appear under fluorescent
or LED lighting.
●● Press the shutter button halfway to focus on subjects before pressing it all the
way down to shoot (= 23).
●● Make sure subjects are within focusing range (= 150).
●● Set [AF-assist Beam] to [On] (= 42).
●● Confirm that unneeded functions such as macro are deactivated.
No AF frames are displayed and the camera does not focus when the
shutter button is pressed halfway.
●● To have AF frames displayed and the camera focus correctly, try composing the
shot with higher-contrast subject areas centered before you press the shutter
button halfway. Otherwise, try pressing the shutter button halfway repeatedly.
Advanced Guide
Lower the flash and set the flash mode to [ ] (= 28).
Adjust brightness by using exposure compensation (= 54).
Use spot metering (= 54).
Reduce the lighting on subjects.
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Subjects in flash shots look too bright, highlights are washed-out.
]
Set [IS Mode] to [Continuous] (= 41).
Raise the flash and set the flash mode to [ ] (= 62).
Increase the ISO speed (= 55).
Mount the camera on a tripod or take other measures to keep it still. Additionally,
you should set [IS Mode] to [Off] when using a tripod or other means to secure
the camera (= 41).
Shots are out of focus.
Basic Guide
●● Shoot within flash range (= 149).
●● Increase the ISO speed (= 55).
[ ] flashes on the screen when the shutter button is pressed, and shooting
is not possible (= 31).
[ ] is displayed when the shutter button is pressed halfway (= 31).
●●
●●
●●
●●
Before Use
Shots look too dark despite the flash firing (= 31).
No date stamp is added to images.
●● Configure the [Date Stamp
] setting (= 37). Note that date stamps are not
added to images automatically, merely because you have configured the
[Date/Time] setting (= 17).
●● Date stamps are not added in shooting modes (= 145) in which [Date Stamp
cannot be configured (= 37).
Raise the flash and set the flash mode to [ ] (= 62).
Adjust brightness by using exposure compensation (= 54).
Adjust contrast by using i-Contrast (= 55, = 81).
Use spot metering (= 54).
●● Shoot within flash range (= 149).
●● Lower the flash and set the flash mode to [
Playback Mode
] (= 28).
White spots appear in flash shots.
Wi-Fi Functions
●● This is caused by light from the flash reflecting off dust or airborne particles.
Shots look grainy.
Setting Menu
●● Lower the ISO speed (= 55).
●● High ISO speeds in some shooting modes may cause grainy images (= 46).
Accessories
Subjects are affected by red-eye.
●● Set [Red-Eye Lamp] to [On] (= 42) to light the red-eye reduction lamp
(= 4) for flash shots. Note that while the red-eye reduction lamp is lit (for
about one second), it is not possible to shoot, because the lamp is counteracting
red-eye. For best results, have subjects look at the red-eye reduction lamp. Also
try increasing the lighting in indoor scenes and shooting at closer range.
●● Edit images using red-eye correction (= 81).
Appendix
Index
Recording to the memory card takes too long, or continuous shooting is
slower.
●● Use the camera to perform low-level formatting of the memory card (= 118).
Shooting settings or FUNC. menu settings are not available.
●● Available setting items vary by shooting mode. Refer to “Functions Available in
Each Shooting Mode”, “FUNC. Menu”, and “Shooting Tab” (= 142 – = 145).
135
Cannot access the Story Highlights home screen by pressing the [
button.
Shooting Movies
The elapsed time shown is incorrect, or recording is interrupted.
●● Use the camera to format the memory card, or switch to a card that supports
high-speed recording. Note that even if the elapsed time display is incorrect, the
length of movies on the memory card corresponds to the actual recording time
(= 117, = 151).
[
] is displayed and shooting stops automatically.
●● The camera’s internal memory buffer filled up as the camera could not record to
the memory card quickly enough. Try one of the following measures.
-- Use the camera to perform low-level formatting of the memory card (= 118).
-- Lower the image quality (= 39).
-- Switch to a memory card that supports high-speed recording (= 151).
Zooming is not possible.
●● Zooming is not possible when shooting movies in [
] mode (= 48).
Subjects look distorted.
●● Subjects that pass in front of the camera quickly may look distorted. This is not a
malfunction.
]
●● Home screen display is not possible when connected to a printer. Disconnect the
camera from the printer.
●● Home screen display is not possible during Wi-Fi connections. End the Wi-Fi
connection.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Memory Card
Auto Mode /
Hybrid Auto Mode
The memory card is not recognized.
●● Restart the camera, with the memory card in it (= 22).
Other Shooting Modes
Computer
P Mode
Cannot transfer images to a computer.
Playback Mode
●● When attempting to transfer images to the computer via a cable, try reducing the
transfer speed as follows.
] button to enter Playback mode. Hold the [
] button
-- Press the [
down as you press the [ ] and [ ] buttons at the same time. On the next
screen, press the [ ][ ] buttons to choose [B], and then press the [ ] button.
Wi-Fi Functions
Setting Menu
Playback
Accessories
Playback is not possible.
●● Image or movie playback may not be possible if a computer is used to rename
files or alter the folder structure.
Playback stops, or audio skips.
●● Switch to a memory card that you have performed low-level formatting on with the
camera (= 118).
●● There may be brief interruptions when playing movies copied to memory cards
that have slow read speeds.
●● When movies are played on a computer, frames may be dropped and audio may
skip if computer performance is inadequate.
Appendix
Index
Sound is not played during movies.
●● Adjust the volume (= 114) if you have activated [Mute] (= 114) or the sound
in the movie is faint.
●● No sound is played for movies shot in [ ] mode (= 48) because audio is not
recorded in this mode.
136
Images take a long time to send./The wireless connection is disrupted.
Wi-Fi
Cannot access the Wi-Fi menu by pressing the [
] button.
●● The Wi-Fi menu cannot be accessed while the camera is connected to a printer
or computer via a cable. Disconnect the cable.
Cannot add a device/destination.
●● A total of 20 items of connection information can be added to the camera. Erase
unneeded connection information from the camera first, and then add new
devices/destinations (= 111).
●● Use a computer or smartphone to register Web services (= 99).
●● To add a smartphone, first install the dedicated application Camera Connect on
your smartphone (= 88).
●● To add a computer, first install the software CameraWindow on your computer.
Also check your computer and Wi-Fi environment and settings (= 94,
= 95).
●● Do not use the camera near sources of Wi-Fi signal interference, such as
microwave ovens, Bluetooth devices, or other equipment operating on the
2.4 GHz band.
●● Bring the camera closer to the other device you are trying to connect to (such as
the access point), and make sure there are no objects between the devices.
●● Multiple images may take a long time to send. Try resizing the image to reduce
sending time (= 107).
●● Movies may take a long time to send.
●● Do not use the camera near sources of Wi-Fi signal interference, such as
microwave ovens, Bluetooth devices, or other equipment operating on the
]
2.4 GHz band. Note that images may take a long time to send even when [
is displayed.
●● Bring the camera closer to the other device you are trying to connect to (such as
the access point), and make sure there are no objects between the devices.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
No notification message is received on a computer or smartphone after
adding CANON iMAGE GATEWAY to the camera.
Other Shooting Modes
●● Make sure the email address you entered is correct, and try adding the
destination again.
●● Check the email settings on the computer or smartphone. If they are configured to
block email from certain domains, you may not be able to receive the notification
message.
P Mode
Playback Mode
Want to erase Wi-Fi connection information before disposing of the
camera or giving it to someone else.
Wi-Fi Functions
●● Reset the Wi-Fi settings (= 113).
Setting Menu
Cannot connect to the access point.
●● Confirm that the access point channel is set to a channel supported by the
camera (= 149). Note that instead of auto channel assignment, it is advisable to
specify a supported channel manually.
Accessories
Cannot send images.
Appendix
●● The destination device has insufficient storage space. Increase the storage space
on the destination device and resend the images.
●● The write-protect switch of the memory card in the destination camera is set to
the locked position. Slide the write-protect switch to the unlocked position.
●● Images are not sent to CANON iMAGE GATEWAY or other Web services if you
move or rename image files or folders on the computer that received images sent
using Image Sync via an access point (= 108). Before moving or renaming
these image files or folders on the computer, make sure the images have already
been sent to CANON iMAGE GATEWAY or other Web services.
Index
Cannot resize images for sending.
●● Images cannot be resized to be bigger than the recording pixel setting of their
original size.
●● Movies cannot be resized.
137
On-Screen Messages
If an error message is displayed, respond as follows.
Shooting or Playback
Cannot magnify!/Cannot play back this content in Smart Shuffle/Cannot
rotate/Cannot modify image/Cannot modify/Unselectable image.
●● The following functions may be unavailable for images that were renamed or
already edited on a computer, or images shot with another camera. Note that
starred (*) functions are not available for movies.
Magnify* (= 70), Smart Shuffle* (= 71), Rotate* (= 76), Favorites
(= 78), Edit* (= 79), Print List* (= 131), and Photobook Set-up*
(= 133).
Before Use
Basic Guide
Advanced Guide
Camera Basics
No memory card
Invalid selection range
●● When specifying a range for image selection (= 73, = 76, = 132), you
attempted to choose an initial image that was after the final image, or vice-versa.
Auto Mode /
Hybrid Auto Mode
Memory card locked
Exceeded selection limit
Other Shooting Modes
●● The memory card may be inserted facing the wrong way. Reinsert the memory
card facing the correct way (= 16).
●● The write-protect switch of the memory card is set to the locked position. Switch
the write-protect switch to the unlocked position (= 16).
Cannot record!
●● Shooting was attempted without a memory card in the camera. To shoot, insert a
memory card facing the correct way (= 16).
Memory card error (= 118)
●● If the same error message is displayed even after you have formatted a
supported memory card (= 2) and have inserted it facing the correct way
(= 16), contact a Canon Customer Support Help Desk.
Insufficient space on card
●● There is not enough free space on the memory card to shoot (= 28, = 44,
= 53) or edit images (= 79). Either erase unneeded images (= 74) or
insert a memory card with enough free space (= 16).
Charge the battery (= 16)
No Image.
●● The memory card does not contain any images that can be displayed.
Protected! (= 72)
Unidentified Image/Incompatible JPEG/Image too large./Cannot play back
MOV
●● Unsupported or corrupt images cannot be displayed.
●● It may not be possible to display images that were edited or renamed on a
computer, or images shot with another camera.
●● More than 998 images were selected for Print List (= 131) or Photobook Set-up
(= 133). Choose 998 images or less.
●● Print List (= 131) or Photobook Set-up (= 133) settings could not be saved
correctly. Reduce the number of selected images and try again.
●● You attempted to choose more than 500 images in Protect (= 72), Erase
(= 74), Favorites (= 78), Print List (= 131), or Photobook Set-up
(= 133).
P Mode
Playback Mode
Wi-Fi Functions
Naming error!
Setting Menu
●● The folder could not be created or images could not be recorded, because the
highest supported folder number (999) for storing images on the card has been
reached and the highest supported image number (9999) for images in folders
has been reached. On the [ ] tab, change [File Numbering] to [Auto Reset]
(= 118), or format the memory card (= 117).
Accessories
Appendix
Lens Error
●● This error may occur if the lens is held while it is moving, or when the camera is
used in dusty or sandy locations.
●● Frequent display of this error message may indicate camera damage. In this
case, contact a Canon Customer Support Help Desk.
Index
A camera error was detected (error number)
●● If this error message is displayed immediately after a shot, the image may not
have been saved. Switch to Playback mode to check for the image.
●● Frequent display of this error message may indicate camera damage. In this
case, write down the error number (Exx) and contact a Canon Customer Support
Help Desk.
138
File Error
●● Correct printing (= 127) may not be possible for photos from other cameras or
images that have been altered using computer software, even if the camera is
connected to the printer.
Print error
●● Check the paper size setting (= 129). If this error message is displayed when
the setting is correct, restart the printer and complete the setting on the camera
again.
Ink absorber full
●● Contact a Canon Customer Support Help Desk to request assistance with ink
absorber replacement.
Wi-Fi
Connection failed
Sending failed
Memory card error
●● If the same error message is displayed even when you have inserted a formatted
memory card facing the correct way, contact a Canon Customer Support Help
Desk.
Receiving failed
Insufficient space on card
Before Use
Basic Guide
Advanced Guide
Camera Basics
●● There is not enough free space on the memory card in the target camera to
receive images. Erase images to create space on the memory card, or insert a
memory card with sufficient space.
Auto Mode /
Hybrid Auto Mode
Receiving failed
Memory card locked
Other Shooting Modes
●● The write-protect switch of the memory card in the camera to receive the images
is set to the locked position. Slide the write-protect switch to the unlocked
position.
P Mode
●● No access points were recognized. Check the access point settings (= 95).
●● A device could not be found. Turn the camera off and on again, and retry the
connection.
●● Check the device you want to connect to and make sure it is ready for connection.
Receiving failed
Naming error!
Playback Mode
●● When the highest folder number (999), and the highest image number (9999)
have been reached on the receiving camera, images cannot be received.
Wi-Fi Functions
Cannot determine access point
Insufficient space on server
Setting Menu
●● The WPS buttons on numerous access points were pressed simultaneously. Try
reconnecting again.
No access points found
●● Check to make sure that the access point is turned on.
●● When connecting to an access point manually, make sure that you entered the
correct SSID.
●● Delete unnecessary images uploaded to CANON iMAGE GATEWAY to create
space.
●● Save the images sent via Image Sync (= 108) to your computer.
Accessories
Check network settings
Appendix
●● Check to make sure your computer can connect to the Internet with the current
network settings.
Index
Incorrect password/Incorrect Wi-Fi security settings
●● Check the access point security settings (= 95).
IP address conflict
●● Reset the IP address so that it does not conflict with another.
Disconnected/Receiving failed/Sending failed
●● You may be in an environment where Wi-Fi signals are obstructed.
●● Avoid using the camera’s Wi-Fi function around microwave ovens, Bluetooth
devices, and other devices that operate on the 2.4 GHz band.
●● Bring the camera closer to the other device you are trying to connect to (such as
the access point), and make sure there are no objects between the devices.
●● Check the connected device to make sure it is not experiencing errors.
139
On-Screen Information
Shooting (Information Display)
(28)
(29) (30)
(3)
(16)
(17)
(18)
(4)
(19)
(2)
(26) i-Contrast (= 55)
(21) AE lock (= 54)
(27) ISO speed (= 55)
(22) Shutter speed
(28) Zoom bar (= 28)
(23) Spot AE point frame (= 54)
(29) IS mode icon (= 33)
(24) Aperture value
(30) Auto Zoom (= 35)
(25) Exposure compensation level
(= 54)
(31) Time zone (= 115)
* In [
(9) (10)(11)(12) (13) (14) (15)
(1)
(20) Date stamp (= 37)
(21) (22) (23) (24) (25)
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Display
P Mode
Details
Playback Mode
Sufficient charge
(31) (32)
[Charge the battery]
Slightly depleted, but sufficient
Wi-Fi Functions
Nearly depleted—charge the battery pack soon
Setting Menu
Depleted—charge the battery pack immediately
Accessories
(26)(27)
(1)
Battery level (= 140)
(11) Self-timer (= 36)
(2)
White balance (= 56)
(12) Movie quality (= 39)
(3)
My Colors (= 56)
(13) Remaining time (= 151)
(4)
Drive mode (= 38)
(5)
Eco mode (= 116)
(14) Zoom magnification (= 34),
Digital tele-converter (= 59)
(6)
Grid lines (= 40)
(15) Focus range (= 58)
(7)
Camera shake warning (= 31)
(8)
Metering method (= 54)
(16) Shooting mode (= 142), Scene
icon (= 32)
(9)
Still image compression (= 63),
Recording pixel setting (= 39)
(10) Recordable shots (= 151)*
Camera Basics
(32) Image stabilization (= 41)
Battery Level
(Blinking red)
(8)
Advanced Guide
An on-screen icon or message indicates the battery charge level.
(6)
(20)
Basic Guide
] mode, indicates the number of shots available.
(5)
(7)
Before Use
Appendix
Index
(17) AF frame (= 59)
(18) Hybrid Auto mode (= 30)
(19) Flash mode (= 62)
140
(24) Image editing (= 79)
Playback (Detailed Information Display)
(26) Red-eye correction (= 81)
Basic Guide
(8) (9) (10) (11) (12)(13) (14)
●● Some information may not be displayed when viewing images on
a TV (= 124).
(1)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(2)
(3)
(4)
(5)
(6)
(7)
(1)
(24) (25)(26)
Movie playback (= 64), Linked
digest movie playback (= 67),
Group playback (= 69)
(2)
My Colors (= 56), Creative
Shot effect (= 44)
(3)
Histogram (= 66)
(4)
Group playback (= 69), Digest
movies (= 66)
(5)
Compression (image quality)
(= 63) / Recording pixel setting
(= 39), MP4 (movies)
(6)
Protection (= 72)
(7)
Favorites (= 78)
(8)
Exposure compensation level
(= 54)
(9)
ISO speed (= 55), Playback
speed (= 48)
(10) Shooting mode (= 142)
(11) Metering method (= 54)
Before Use
(25) White balance (= 56)
Advanced Guide
Camera Basics
Summary of Movie Control Panel
Auto Mode /
Hybrid Auto Mode
The following operations are available on the movie control panel,
accessed as described in “Viewing” (= 64).
Other Shooting Modes
Exit
Play
P Mode
Slow Motion (Press the [ ][ ] buttons to adjust the playback
speed. No sound is played.)
Playback Mode
Skip Backward* or Previous Clip (= 83) (To continue skipping
backward, keep holding down the [ ] button.)
Wi-Fi Functions
(13) Image Sync (= 108)
(14) Folder number – File number
(= 118)
Previous Frame (For fast-rewind, keep holding down the [
button.)
Setting Menu
(15) Current image no. / Total no. of
images
Next Frame (For fast-forward, keep holding down the [
(12) Battery level (= 140)
(16) Shutter speed (still images), Image
quality / Frame rate (movies)
(= 39)
(17) Aperture value
(18) Flash (= 62)
(19) i-Contrast (= 55, = 81)
(20) Focus range (= 58)
]
Accessories
] button.)
Appendix
Skip Forward* or Next Clip (= 83) (To continue skipping
forward, keep holding down the [ ] button.)
Erase Clip (displayed when a digest movie is selected, = 83)
Index
Edit (= 82)
Shown when the camera is connected to a PictBridge-compatible
printer (= 127).
* Displays the frame approx. 4 sec. before or after the current frame.
(21) File size
(22) Still images: Recording pixel
setting (= 151)
Movies: Playback time (= 151)
●● During movie playback, you can skip back or forward (or to the
previous or next clip) by pressing the [ ][ ] buttons.
(23) Shooting date/time (= 17)
141
Before Use
Functions and Menu Tables
Basic Guide
Advanced Guide
Functions Available in Each Shooting Mode
Camera Basics
Shooting Mode
Function
Exposure Compensation (= 54)
Flash (= 62)
Focus Range (= 58)
Tracking AF Subject Selection (= 60)
Change Shooting Display (= 24)
*1 Not available, but switches to [
] in some cases.
Auto Mode /
Hybrid Auto Mode
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
Other Shooting Modes
O
–
*1
O
O
–
–
O
O
–
*1
O
O
O
O
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
–
–
–
O
O
O
*1
O
O
–
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
–
–
–
O
–
O
–
O
P Mode
O
–
–
O
O
–
–
–
O
–
–
O
O
O
O
O
O
O
O
O
O
–
–
–
O
–
–
–
O
–
–
–
O
O
O
O
O
O
–
O
O
O
O
O
O
O
–
–
O
O
–
–
O
O
–
–
O
O
O
–
O
O
O
O
O
O
O
O
O
–
–
O
O
O
O
O
O Available or set automatically.
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
– Not available.
Appendix
Index
142
Before Use
FUNC. Menu
Basic Guide
Shooting Mode
Advanced Guide
Function
Light Metering (= 54)
My Colors (= 56)
*1 *1
White Balance (= 56)
*2
ISO Speed (= 55)
AUTO
80 / 100 / 200 / 400 / 800 / 1600 / 3200
Self-Timer (= 36)
Self-Timer Settings (= 36)
Delay*3
Shots*4
Drive Mode (= 38)
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
–
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
O
O
–
O
O
O
O
O
O
O
O
O
–
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
O
O
O
O
O
–
–
–
–
–
–
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
O
O
O
O
O
O
–
O
–
O
–
–
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
*1 White balance is not available.
*2 Set in a range of 1 – 5: contrast, sharpness, color saturation, red, green, blue, and skin tone.
*3 Cannot be set to 0 seconds in modes without selection of the number of shots.
*4 One shot (cannot be modified) in modes without selection of the number of shots.
O Available or set automatically.
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
– Not available.
143
Before Use
Shooting Mode
Function
Still Image Aspect Ratio (= 38)
Recording pixels (= 39)
Compression (= 63)
Movie Quality (= 39)
Auto Zoom (= 35)
*1 Only [
] and [
] are available.
*2 Synchronizes with the aspect ratio setting and is automatically set (= 48).
Basic Guide
–
–
O
O
O
O
O
O
–
–
–
–
*1
–
O
O
O
O
O
O
–
–
–
O
–
–
–
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
O
O
–
O
–
–
O
–
O
–
–
–
–
–
O
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
–
–
–
O
O
–
O
O
O
–
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
O
–
O
O
O
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
–
*2
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O
O
–
O Available or set automatically.
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
– Not available.
Setting Menu
Accessories
Appendix
Index
144
Before Use
Shooting Tab
Basic Guide
Shooting Mode
Advanced Guide
Function
AF Frame (= 59)
Face AiAF
Tracking AF
Center
AF Frame Size (= 59)*1
Normal
Small
Digital Zoom (= 34)
Standard
Off
1.6x/2.0x
AF-Point Zoom (= 40)
On
Off
Servo AF (= 61)
On
Off
Continuous AF (= 62)
On
Off
*1 Available when the AF frame is set to [Center].
*2 [On] when subject movement is detected in [
] mode.
O
–
–
O
–
–
O
–
–
O
O
O
O
O
O
O
–
–
O
–
–
O
–
–
O
O
O
O
–
–
O
O
O
–
–
O
–
–
–
O
–
O
O
O
O
O
O
O
O
O
O
–
–
O
O
O
O
–
–
–
–
–
–
O
O
O
O
–
–
–
–
–
–
O
O
–
–
O
O
O
–
–
–
O
O
O
O
O
O
O
O
–
–
O
O
O
O
–
–
O
–
O
O
–
O
O
O
O
O
–
O
O
–
O
O
–
O
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
–
O
–
O
O
–
O
O
–
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
–
O
–
O
–
O
O
O
O
O
O
O
–
O
O
O
–
O
–
O
–
*2
O
O
O
O
–
O
–
O
–
O
–
O
–
O
O
O
–
O
–
O
–
O
O
O
O
O
O
O
–
O
–
O
O
–
O
–
O
–
O
O
O
O
O
–
O
–
O
–
O
–
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O Available or set automatically.
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
– Not available.
145
Before Use
Shooting Mode
Function
AF-assist Beam (= 42)
On
Off
Flash Settings (= 42)
Red-Eye Lamp
On/Off
i-Contrast (= 55)
Auto
Off
Review image after shooting (= 43)
Off/Quick
Display Time
2 sec./4 sec./8 sec./Hold
Off
Display Info
Detailed
Grid Lines (= 40)
On/Off
IS Settings (= 41)
Off
Continuous
IS Mode
Shoot Only
1
Dynamic IS
2
Date Stamp (= 37)
Off
Date/Date & Time
Digest Type (= 30)
Include Stills/No Stills
Basic Guide
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
–
O
O
–
–
O
O
–
O
O
–
O
–
O
–
O
–
O
O
–
–
O
O
–
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
–
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
–
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
O
O
O
O
O
O
O
O
O
O
O
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
–
O
O
O
O
O
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
O Available or set automatically.
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
– Not available.
146
Set Up Tab
Before Use
Playback Tab
Item
Reference Page
Item
Reference Page
Mute
= 114
Album Playback
= 84
Volume
= 114
List/Play Digest Movies
= 67
Hints & Tips
= 115
Slideshow
= 70
Date/Time
= 17
Erase
= 74
Time Zone
= 115
Protect
= 72
Lens Retraction
= 116
Rotate
= 76
Eco Mode
= 116
Favorites
= 78
Power Saving
= 23, = 116
Photobook Set-up
= 133
Disp. Brightness
= 117
i-Contrast
= 81
Start-up Image
= 117
Red-Eye Correction
= 81
Format
= 117
Cropping
= 79
File Numbering
= 118
Resize
= 79
Create Folder
= 119
My Colors
= 80
Units
= 119
Transition
= 64
Video System
–
Scroll Display
= 64
Wireless settings
= 87
Group Images
= 69
Certification Logo Display
= 119
Auto Rotate
= 77
Language
= 19
Resume
= 64
Reset All
= 120
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
147
Print Tab
Handling Precautions
Item
Reference Page
Print
–
Select Images & Qty.
= 131
Select Range
= 132
Select All Images
= 132
Clear All Selections
= 132
Print Settings
= 131
Playback Mode FUNC. Menu
Item
Reference Page
Rotate
= 76
Protect
= 72
Favorites
= 78
Erase
= 74
Print
= 127
Group Playback
= 69
Play Movie
= 64
Play Linked Digest Movie
= 67
Smart Shuffle
= 71
Image Search
= 68
Slideshow
= 70
●● The camera is a high-precision electronic device. Avoid dropping it or
subjecting it to strong impact.
Before Use
Basic Guide
Advanced Guide
●● Never bring the camera near magnets, motors, or other devices that
generate strong electromagnetic fields, which may cause malfunction
or erase image data.
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● If water droplets or dirt adheres to the camera or screen, wipe with
a dry soft cloth, such as an eyeglass cloth. Do not rub hard or apply
force.
Other Shooting Modes
●● Never use cleaners containing organic solvents to clean the camera
or screen.
P Mode
●● Use a blower brush to remove dust from the lens. If cleaning is difficult,
contact a Canon Customer Support Help Desk.
Playback Mode
●● To prevent condensation from forming on the camera after sudden
temperature changes (when the camera is transferred from cold to
warm environments), put the camera in an airtight, resealable plastic
bag and let it gradually adjust to the temperature before removing it
from the bag.
●● If condensation does form on the camera, stop using it immediately.
Continuing to use the camera in this state may damage it. Remove
the battery pack and memory card, and wait until the moisture has
evaporated before resuming use.
●● Store unused battery packs in a plastic bag or other container.
To maintain battery performance if you will not use the battery pack for
some time, about once a year charge it and then use the camera until
it runs out of power before storing the battery pack.
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
148
Built-in Flash
Flash Range (Wide angle end)..........50 cm – 4.0 m (1.6 – 13 ft.)
Flash Range (Telephoto end)............1.0 – 2.0 m (3.3 – 6.6 ft.)
Specifications
Camera
Image Sensor
Camera Effective Pixels
(Image processing may cause
a decrease in the number of pixels.) ........Approx. 20.2 megapixels
Total Pixels........................................Approx. 21.1 megapixels
Image Size.........................................1/2.3 type
Lens
Focal Length
(35mm film equivalent)...........................4.5 – 112.5 mm (25 – 625 mm)
Zoom Magnification...........................25×
Digital Zoom
Magnification.....................................Approx. 4×
Max. Magnification
(digital x optical zoom).......................Approx. 100×
Focal Length
(max. telephoto, 35mm film equivalent).....Equivalent to approx. 2500 mm
Screen (Monitor)
Type...................................................TFT color liquid crystal
Screen Size.......................................7.5 cm (3.0 in.)
Effective Pixels..................................Approx. 922,000 dots
Continuous Shooting (CIPA compliant)
Speed
(Varies depending on the subject,
zoom position, and other shooting factors,
as well as memory card brands.) .............Normal Continuous Shooting in
Auto/P modes:
Approx. 2.5 shots/sec.
Normal Continuous High-Speed
Burst mode: Approx. 7.1 shots/sec.
Shutter Speed
Auto Mode (automatic settings).........1 – 1/2000 sec.
Range in all shooting modes
Max...................................................15 sec.
Min....................................................1/2000 sec.
Speed (unit: sec.)..............................Long Shutter Mode
15, 13, 10, 8, 6, 5, 4, 3.2, 2.5, 2,
1.6, 1.3, 1
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Aperture
F Number...........................................3.2 / 9.0 (W)
6.6 / 18 (T)
P Mode
AF
AF Frame...........................................Face Detect AiAF (number of AF
frames: max. 9), Tracking AF,
Center
Playback Mode
File Format.............................................Design rule for Camera File
system (DCF) compliant; DPOF
(version 1.1) compatible
Setting Menu
Wi-Fi Functions
Accessories
Data Type (Still Images)
Image File Format.............................Exif 2.3 (DCF 2.0)
Image Type........................................JPEG
Data Type (Movies)
Recording Format..............................MP4
Video..................................................MPEG-4 AVC/H.264
Audio.................................................MPEG-4 AAC-LC (Monaural)
Appendix
Index
Power Supply
Battery Pack......................................NB-13L
149
Interface
Wired.................................................Hi-Speed USB (Micro)
HDMI (Type D)
Wireless.............................................Wi-Fi
Specifications: IEEE 802.11b/g/n
Frequency: 2.4 GHz
Channels: 1 – 11
Security: WEP, WPA-PSK (AES/
TKIP), WPA2-PSK (AES/TKIP)
NFC
Operating Environment
Temperatures.....................................0 – 40 °C (32 – 104 °F)
Dimensions (CIPA compliant)
(WxHxD)................................................96.9 x 56.9 x 27.9 mm
(3.81 x 2.24 x 1.10 in.)
Weight (CIPA compliant)
Including Battery Pack,
Memory Card.....................................Approx. 182 g (approx. 6.42 oz.)
Camera Body Only............................Approx. 158 g (approx. 5.57 oz.)
Number of Shots/Recording Time, Playback Time
Number of Shots
(CIPA compliant)
Before Use
Basic Guide
Approx. 295 shots
Advanced Guide
Number of Shots in Eco Mode Approx. 405 shots
Movie Recording Time
(CIPA compliant)*1
Approx. 1 hour, 5 minutes
Movie Recording Time
(Continuous Shooting)*2
Approx. 1 hour, 45 minutes
Playback Time*3
Approx. 6 hours
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
*1
Total time when shooting repeatedly under the following conditions:
] mode, with all other settings set to defaults
- In [
- With recording, stopping, zooming, and turning the camera on and off
*2Total time when shooting repeatedly under the following conditions:
] mode, with all other settings set to defaults
- In [
- Automatically stop/resume after the time or capacity per recording is reached
*3Time when playing back a slideshow of still images.
Playback Mode
Wi-Fi Functions
Setting Menu
Shooting Range
Accessories
Shooting
Mode
Focus
Range
–
Maximum Wide
Angle ( )
Maximum Telephoto
( )
1 cm (0.4 in.) – infinity 1.0 m (3.3 ft.) – infinity
Appendix
Index
5 cm (2.0 in.) – infinity 1.0 m (3.3 ft.) – infinity
Other
modes
1 – 50 cm
(0.4 in. – 1.6 ft.)
–
3.0 m (9.8 ft.) – infinity 3.0 m (9.8 ft.) – infinity
150
Number of Shots per Memory Card
Recording Time per Memory Card
The number of shots at an aspect ratio (= 38) of 4:3 per memory card
is as follows. Note that the number of shots available varies by aspect
ratio.
Number of shots per 16 GB memory card (approx. shots)
1766
2980
3546
5925
9344
16755
10798
53992
Pixels
Before Use
Recording Time per 16 GB Single Clip Recording
Memory Card (Approx.)
Time (Approx.)
(1920 x 1080) 1 hr. 8 min. 34 sec.
29 min. 59 sec.
(1280 x 720)
3 hr. 58 min. 1 sec.
29 min. 59 sec.
(640 x 480)
8 hr. 25 min. 48 sec.
1 hr.
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● The values in the table are based on Canon measurement conditions
and may change depending on the subject, memory card and camera
settings.
Other Shooting Modes
●● Recording times for individual movies are based on memory cards
rated at an SD speed class of 10. Recording may stop when cards
rated at lower speed classes are used. Recording will also stop
automatically when the file size reaches 4 GB, or when the card
becomes full.
P Mode
Playback Mode
Wi-Fi Functions
80988
Setting Menu
●● The values in the table are based on Canon measurement conditions
and may change depending on the subject, memory card and camera
settings.
Accessories
Appendix
Index
151
Battery Pack NB-13L
Type:
Rechargeable lithium-ion battery
Nominal Voltage:
3.6 V DC
Nominal Capacity:
1250 mAh
Charging Cycles:
Approx. 300 times
Operating Temperatures: 0 – 40 °C (32 – 104 °F)
Before Use
Basic Guide
Advanced Guide
Camera Basics
Battery Charger CB-2LH/CB-2LHE
Auto Mode /
Hybrid Auto Mode
Rated Input: 100 – 240 V AC (50/60 Hz)
0.09 A (100 V) – 0.06 A (240 V)
Rated Output:
4.2 V DC, 0.7 A
Charging Time:
Approx. 2 hr. 10 min. (when using NB-13L)
Operating Temperatures: 5 – 40 °C (41 – 104 °F)
Other Shooting Modes
P Mode
●● Size, weight, and number of shots available are based on
measurement guidelines of the Camera & Imaging Products
Association (CIPA).
Playback Mode
Wi-Fi Functions
●● Under some shooting conditions, the number of shots and recording
time may be less than mentioned above.
Setting Menu
●● Number of shots/time with a fully charged battery pack.
Accessories
Appendix
Index
152
Exposure
Compensation 54
Index
A
Accessories 122
AE lock 54
AF frames 59
Aspect ratio 38
Auto mode (shooting mode) 19, 28
AV cable 124
Continuous shooting
High-speed burst
(shooting mode) 52
Creative shot 44
Cropping 79, 129
Custom white balance 56
D
Batteries → Date/time
(date/time battery)
Power saving 23
Battery charger 2, 122
Battery pack
Charging 16
Eco mode 116
Level 140
Power saving 23
Black and white images 57
Date/time
Adding date stamps 37
Changing 18
Date/time battery 18
Settings 17
World clock 115
Defaults → Reset all
Digital tele-converter 59
Digital zoom 34
Display language 19
DPOF 131
C
E
B
Camera
Reset all 120
Camera access point mode 93
Camera Connect 88
CameraWindow 94, 125
CANON iMAGE GATEWAY 87, 99
Center (AF frame mode) 61
Clock 27
Color (white balance) 56
Compression ratio (image quality) 63
Connecting via an access point 95
Eco mode 116
Editing
Cropping 79
i-Contrast 81
My Colors 80
Red-eye correction 81
Resizing images 79
Editing or erasing connection
information 111
Erasing 74
Error messages 138
F
Face AiAF (AF frame mode) 59
Face self-timer (shooting mode) 51
Favorites 78
File numbering 118
Fireworks (shooting mode) 46
Fish-eye effect (shooting mode) 47
Flash
Deactivating flash 63
On 63
Slow synchro 63
Focusing
AF frames 59
AF-point zoom 40
Servo AF 61
Focus lock 61
Focus range
Macro 58
FUNC. menu
Basic operations 24
Table 143, 148
G
Grid lines 40
H
Handheld nightscene
(shooting mode) 46
HDMI cable 124
High-speed burst (shooting mode) 52
Hybrid Auto (shooting mode) 30
I
i-Contrast 55, 81
Image quality → Compression ratio
(image quality)
Images
Display period 43
Erasing 74
Playback → Viewing
Protecting 72
Image stabilization 41
Image Sync 108
Indicator 27
ISO speed 55
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
L
Playback Mode
Lamp 42
Long shutter (shooting mode) 52
Low light (shooting mode) 46
Wi-Fi Functions
Setting Menu
M
Macro (focus range) 58
Magnified display 70
Memory cards 2
Recording time 151
Menu
Basic operations 25
Table 142
Metering method 54
Miniature effect (shooting mode) 48
Monochrome (shooting mode) 49
Movies
Editing 82
Image quality (recording pixels/
frame rate) 39
Recording time 151
My Colors 56, 80
Accessories
Appendix
Index
153
P
P (shooting mode) 53
Package contents 2
Photobook set-up 133
PictBridge 123, 127
Playback → Viewing
Portrait (shooting mode) 46
Poster effect (shooting mode) 47
Power 122
→ Battery charger,
→ Battery pack
Power saving 23
Printing 127
Program AE 53
Protecting 72
R
Recording pixels (image size) 39
Red-eye correction 81
Remote shooting 110
Reset all 120
Resizing images 79
Rotating 76
S
Saving images to a computer 94, 126
Screen
Display language 19
Icons 140, 141
Menu → FUNC. menu, Menu
SD/SDHC/SDXC memory cards
→ Memory cards
Searching 68
Self-timer 36
2-second self-timer 36
Customizing the self-timer 36
Face self-timer
(shooting mode) 51
Wink self-timer
(shooting mode) 50
Sending images 105
Sending images to a computer 94
Sending images to another
camera 104
Sending images to a printer 103
Sending images to a smartphone 88
Sending images to Web services 99
Sepia tone images 57
Servo AF 61
Shooting
Shooting date/time → Date/time
Shooting information 140
Slideshow 70
Smart Shuffle 71
Smart Shutter (shooting mode) 50
Smile (shooting mode) 50
Software
Installation 94
Saving images to
a computer 94, 126
Sounds 114
Story Highlights 84
Strap 2, 15
Super vivid (shooting mode) 47
V
Viewing 21
Image search 68
Index display 67
Magnified display 70
Single-image display 21
Slideshow 70
Smart Shuffle 71
TV display 124
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
W
Other Shooting Modes
White balance (color) 56
Wi-Fi functions 87
Wi-Fi menu 91
Wink self-timer (shooting mode) 50
World clock 115
P Mode
Playback Mode
Wi-Fi Functions
Z
Zoom 20, 29, 34
Setting Menu
Accessories
Appendix
Index
T
Terminal 124, 127
Toy camera effect
(shooting mode) 49
Tracking AF 60
Traveling with the camera 115
Troubleshooting 134
TV display 124
154
Wi-Fi (Wireless LAN) Precautions
●● Countries and Regions Permitting WLAN Use
-- Use of WLAN is restricted in some countries and regions, and illegal
use may be punishable under national or local regulations. To avoid
violating WLAN regulations, visit the Canon website to check where
use is allowed.
Note that Canon cannot be held liable for any problems arising from
WLAN use in other countries and regions.
●● Doing any of the following may incur legal penalties:
-- Altering or modifying the product
-- Removing the certification labels from the product
●● According to foreign exchange and foreign trade law regulations,
export permission (or service transaction permission) from the
Japanese government is necessary to export strategic resources or
services (including this product) outside Japan.
●● Because this product includes American encryption software, it falls
under U.S. Export Administration Regulations, and cannot be exported
to or brought into a country under U.S. trade embargo.
●● Be sure to make notes of the wireless LAN settings you use.
The wireless LAN settings saved to this product may change or be
erased due to incorrect operation of the product, the effects of radio
waves or static electricity, or accident or malfunction. Be sure to make
notes of wireless LAN settings as a precaution. Please note that
Canon accepts no responsibility for direct or indirect damages or loss
of earnings resulting from a degradation or disappearance of content.
●● When transferring this product to another person, disposing of it, or
sending it for repair, be sure to note the wireless LAN settings and
reset the product to its default settings (erase settings) if necessary.
●● Be sure to use the product as directed in this guide.
Be sure to use the wireless LAN function of this product within the
guidelines noted in this guide. Canon accepts no responsibility for
damages or loss if the function and product are used in ways other
than as described in this guide.
●● Do not use the wireless LAN function of this product near medical
equipment or other electronic equipment.
Use of the wireless LAN function near medical equipment or other
electronic equipment may affect operation of those devices.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Radio Wave Interference Precautions
Other Shooting Modes
P Mode
●● This product may receive interference from other devices that emit
radio waves. To avoid interference, be sure to use this product as far
away as possible from such devices, or avoid using the devices at the
same time as this product.
Playback Mode
Wi-Fi Functions
Security Precautions
Setting Menu
Because Wi-Fi uses radio waves to transmit signals, security precautions
more stringent than when using a LAN cable are required.
Keep the following points in mind when using Wi-Fi.
●● Only use networks you are authorized to use.
This product searches for Wi-Fi networks in the vicinity and displays
the results on the screen. Networks you are not authorized to use
(unknown networks) may also be displayed. However, attempting to
connect to or using such networks could be regarded as unauthorized
access. Be sure to use only networks you are authorized to use, and
do not attempt to connect to other unknown networks.
Accessories
Appendix
Index
●● Canon will not make compensation for damages resulting from loss or
theft of the product.
Canon accepts no responsibility for damages or loss resulting from
unauthorized access or use of target devices registered on this
product due to loss or theft of the product.
155
If security settings have not been properly set, the following problems may
occur.
●● Transmission monitoring
Third parties with malicious intent may monitor Wi-Fi transmissions
and attempt to acquire the data you are sending.
●● Unauthorized network access
Third parties with malicious intent may gain unauthorized access to
the network you are using to steal, modify, or destroy information.
Additionally, you could fall victim to other types of unauthorized access
such as impersonation (where someone assumes an identity to gain
access to unauthorized information) or springboard attacks (where
someone gains unauthorized access to your network as a springboard
to cover their tracks when infiltrating other systems).
To prevent these types of problems from occurring, be sure to thoroughly
secure your Wi-Fi network.
Only use this camera’s Wi-Fi function with a proper understanding of
Wi-Fi security, and balance risk and convenience when adjusting security
settings.
The camera can print to PictBridge-compatible printers
via Wi-Fi. PictBridge technical standards make it easy
to connect digital cameras, printers, and other devices
directly. Additionally, a new standard called DPS
over IP enables PictBridge connections in network
environments, and the camera is also compatible with
this standard.
Trademarks and Licensing
Before Use
●● Microsoft and Windows are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
Basic Guide
●● Macintosh and Mac OS are trademarks of Apple Inc., registered in the
U.S. and other countries.
Advanced Guide
●● App Store, iPhone, and iPad are trademarks of Apple Inc.
Camera Basics
●● The SDXC logo is a trademark of SD-3C, LLC.
Auto Mode /
Hybrid Auto Mode
●● HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
Other Shooting Modes
●● Wi-Fi®, Wi-Fi Alliance®, WPA™, WPA2™ and Wi-Fi Protected Setup™
are trademarks or registered trademarks of the Wi-Fi Alliance.
P Mode
●● The N-Mark is a trademark or registered trademark of NFC Forum, Inc.
in the United States and in other countries.
Playback Mode
●● All other trademarks are the property of their respective owners.
●● This device incorporates exFAT technology licensed from Microsoft.
Wi-Fi Functions
●● This product is licensed under AT&T patents for the MPEG-4 standard
and may be used for encoding MPEG-4 compliant video and/or
decoding MPEG-4 compliant video that was encoded only (1) for
a personal and non-commercial purpose or (2) by a video provider
licensed under the AT&T patents to provide MPEG-4 compliant video.
No license is granted or implied for any other use for MPEG-4 standard.
Setting Menu
Accessories
Appendix
Index
156
Disclaimer
●● Unauthorized reproduction of this guide is prohibited.
●● All measurements based on Canon testing standards.
●● Information subject to change without notice, as are product
specifications and appearance.
Before Use
Basic Guide
Advanced Guide
●● Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
Camera Basics
Auto Mode /
Hybrid Auto Mode
●● The above items notwithstanding, Canon cannot be held liable for any
loss arising from the use of this product.
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
157