advertisement
Solid State Relay
KG3RD Series Single Phase DC Output
● Bipolar transistor output
● Load current:0.1A-2A
● PCB mounted
● Control voltage:5VDC,12VDC,24VDC
● Dielectric strength≥4000VACrms
● Opto-isolation
● LED indication
● RoHS compliant
Product Description
KG3RD series is printed board mounted solid state relay, control voltage is 5VDC,12VDC and 24VDC, load current is 2A, load voltage is 50VDC and 100VDC, dielectric strength is 4000VACrms between input and output. Suitable for all kinds of DC motor, DC power supply, electromagnetic device and intelligent instrument.
Product Selection
KG3RD
Series
Load Voltage
50:50VDC
100:100VDC
Description
5
12
24
Technical Specification
Input Circuit
Control Voltage Range
5
12
24
5
12
24
Minimum Turn-On Voltage
Minimum Turn-Off Voltage
Maximum Input Current
Output Circuit
Load Voltage Range
DC Control
KG3RD50D2-5
KG3RD100D2-5
KG3RD50D2-12
KG3RD100D2-12
KG3RD50D2-24
KG3RD100D2-24
Load Current
2:2Amp
Control Voltage
5: 5VDC
12: 12VDC
24: 24VDC
2A
None:Without Socket
D:With Socket
KG3RD50D2-5D
KG3RD100D2-5D
KG3RD50D2-12D
KG3RD100D2-12D
KG3RD50D2-24D
KG3RD100D2-24D
50VDC
100VDC
4-6VDC
9.6-14.4VDC
19.2-28.8VDC
4VDC
9.6VDC
19.2VDC
1.0VDC
20mA
3-50VDC
3-100VDC
Kudom Electronics Technology www.kudom-elec.com
Transient Overvoltage
Load Current Range
Maximum Surge Current
[@10ms]
Maximum Turn-On Time
Maximum Turn-Off Time
Maximum Off-State Leakage
Current [@ Rated Voltage]
50VDC
100VDC
2A
2A
50Vpk
100Vpk
0.1 - 2A
8A
0.5ms
0.5ms
0.1mA
Maximum On-State Voltage
Drop [@ Rated Current]
1.5VDC
General Information
Dielectric Strength,
Input/Output [50/60Hz]
Ambient Operating
Temperature Range
≥4000Vrms
-30℃ ~ +80℃
Ambient Storage
Temperature Range
Weight [typical]
-30℃ ~ +100℃
18g
Application
Suitable for all kinds of DC motor, DC power supply, electromagnetic device and intelligent instrument.
Installation
64
Relay Socket 42.8
15.8
7.5
24
Thermal Curve
4 2A
3
2
1
0.7
0
0 10 20 30 40 50 60 70 80
Ambient Temperature(℃)
Kudom Electronics Technology www.kudom-elec.com
Important Notice
1. Soldering must be finished within 10 seconds at 250℃,and finished within 5 seconds at 350℃.
2.Consideration of heating dissipation,load current will be decreased if without enough ventilation.
Product Certification
@Kudom Electronics Technology, All Right Reserved
Kudom Electronics Technology www.kudom-elec.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
advertisement