MCPA-LP-FLAP Datasheet

MCPA-LP-FLAP

Addressable Manual Call Point

Low Profile

The MCPA-LP-FLAP is an Analogue Addressable

Manual Call Point, designed and manufactured to comply with EN-54 part 11, compatible with all GFE

Addressable Control panels.

With its enhanced communications mechanism the typical response time, when in alarm, is approximately one second, depending on the number of call points connected to the device loop.

A bi-colour LED flashes Green when the unit is interrogated by the control panel and is illuminated

Red when in Alarm. The command to illuminate the Red LED is emitted by the control panel in response to activation of the individual call point thus confirming that the Alarm signal has been received at the control panel. The individual address, up to 125, of each call point is set via an eight way DIL switch.

The unit is supplied complete with a hinged flap which protects the trigger element from accidental activation and reduces malicious activations as two actions are required in order to activate the device. This unit can be both surface and flush mounted and it can be easily reset using the supplied key after activation.

ON

1 2 3 4 5 6 7 8

ADDRESS

LOOP IN

L1 L1 L2 L2

LOOP OUT

Switches 1-7

Used to configure the Manual Call Point

Address

Switch 8

Not used

ON (1)

OFF (0)

1 2 3 4 5 6 7 8

Address Switches binary weights

1 on =1 4 on =8 7 on = 64

2 on =2 5 on =16

3 on =4 6 on =32

Technical Specifications

Supply Voltage

Current - Quiescent

Current - Device in Alarm

Max. Cable Size

Max. Recommended per Loop

Colour/ Case Material/ Protection

Oper. Temperature/ Max. Humidity

Dimensions/ Weight

Order Code

MCPA-LP-FLAP

Loop Powered 17-30 V DC

500 uA

3.5 mA - Alarm LED Illuminated

0.5-2.5 mm

2

30

Red / ABS Flame Retardant 94V0/ IP24

-10 º C to 50 º C/ 95% RH Non-Condensing

90.0 (W) x 90.0 (H) x 28.0 (D) mm/ 80 grams

Addressable Manual Call Point

Global Fire Equipment Lda.

MARF - Armazens F3 e F4, Sítio do Guelhim, Estoi, 8009-021 FARO, PORTUGAL

Tel: + 351 289 896 560 Fax: + 351 289 865 587

Sales [email protected] Technical Support [email protected]