MACMAT-AR X9510 Installation Guide

Below you will find brief information for Asphalt Resurfacer. The Asphalt Resurfacer is a micro-resurfacer that is designed to be used on older asphalt surfaces. It is a durable product that can be used on driveways, parking lots, and streets. The Asphalt Resurfacer is easy to apply and dries quickly.

PDF

Document

M
MAGMAT
ASPHALT RESURFACER
EXTREMELY DURABLE TYPE II MICRO-RESURFACER
PERFECT FOR:
v/ Driveways
v Low Volume
Parking Lots
vy/ Streets
v Cul-de-sacs
CRIUS CORP
PERFORMANCE
SIMILAR TO
ASPHALT OVERLAY
BLACK COLOR
STAYS FOR LIFE
OF PRODUCT
RECOMMENDED FOR
USE ON PAVEMENT
OLDER THAN 3 YEARS
www.MACMAT.net
Clean surface &amp; remove any vegetation
Do NOT apply MACMAT to a wet surface
or if rain is imminent. Temperature must
be 60&deg;or rising for a 24 hour period.
Open pail and thoroughly mix product.
Apply MACMAT Asphalt Resurfacer with
a squeegee using a back &amp; forth motion,
overlapping the previous pull by 70% or
more as you move down the area to be
applied. The material will build up to
form a strong protective layer.
Stay off surface until completely dry to
touch. Keep car traffic off for at least
12 hours.
">

Hello! I am an AI chatbot specifically trained to assist you with the MACMAT-AR X9510 Installation Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Extremely durable
Type II micro-resurfacer
Similar to asphalt overlay
Black color
Lasts for the life of the product
Easy to apply
Dries quickly
Recommended for use on pavement older than 3 years

Frequently asked questions

MACMAT Asphalt Resurfacer is a type II micro-resurfacer that is designed to be used on older asphalt surfaces. It is a durable product that can be used on driveways, parking lots, and streets.

Clean the surface and remove any vegetation. Do not apply MACMAT to a wet surface or if rain is imminent. The temperature must be 60° or rising for a 24-hour period. Open the pail and thoroughly mix the product. Apply MACMAT Asphalt Resurfacer with a squeegee using a back and forth motion, overlapping the previous pull by 70% or more as you move down the area to be applied. The material will build up to form a strong protective layer.

Stay off the surface until it is completely dry to the touch. Keep car traffic off for at least 12 hours.