TeachUcomp Advanced QuickBooks User manual

Below you will find brief information for QuickBooks Advanced. The QuickBooks Advanced provides detailed information about various features of QuickBooks, such as creating new form templates, performing basic and additional customizations, using graphs, customizing forms, estimating, time tracking, using credit card accounts, assets and liabilities, equity accounts, writing letters, using QuickBooks tools, company management, using the accountant's review and using the help menu. The program is designed to give users with a basic skill set in using QuickBooks further enhancements to their knowledge base.

PDF

Document

A Presentation of TeachUcomp Incorporated.

Copyright ©

TeachUcomp, Inc. 2012

only!

Advanced

purposes

TeachUcomp, Inc.

…it’s all about you

for evaluation

Sample-

Advanced QuickBooks

Advanced QuickBooks

Copyright:

may not be reproduced or stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, recording, photocopying, or otherwise, without the express written permission of

TeachUcomp, Inc.

For PDF manuals, TeachUcomp, Inc. allows the owner of the PDF manual to make up to 2 additional copies of the PDF manual that the owner may place on up to 2 additional non-shared computer hard drives for ease of use when using the accompanying CD-ROM tutorials. TeachUcomp, Inc. also grants unlimited personal printing rights to the owner, strictly limited to the purposes of not-for-profit personal or private education or research.

The unauthorized reproduction or distribution of this copyrighted work is illegal. Criminal copyright infringement, including infringement without monetary gain, is investigated by the FBI and is punishable by up to five years in federal prison and a fine of $250,000.

Trademark Acknowledgements:

purposes

Intuit, Quicken, QuickBooks, QuickBooks Pro, QuickBooks Premier, Turbo Tax, EasyStep,

QuickReports, and QuickZoom are registered trademarks of Intuit, Inc. Windows, Windows Vista, Windows

7, Microsoft Word 2007, Microsoft Word 2010, Microsoft Excel 2007, Microsoft Excel 2010 and Outlook are registered trademarks of Microsoft Corporation. Other brand names and product names are trademarks or registered trademarks of their respective holders.

Disclaimer:

While every precaution has been made in the production of this book, TeachUcomp, Inc. assumes no responsibility for errors or omissions. Nor is any liability assumed for damages resulting from the use of the information contained herein. These training materials are provided without any warranty whatsoever, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. All evaluation for

TeachUcomp, Inc.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 2

Introduction and Overview

Welcome to the advanced section of Teachucomp, Inc.

’s the

only!

QuickBooks is one of the most popular accounting and bookkeeping programs available today. The advanced section of this class is designed to give the student with a basic skill set in using QuickBooks further enhancements to their knowledge base.

QuickBooks is a terrific program to learn, as the skills that automating, organizing and structuring the bookkeeping of your company.

QuickBooks is a multi-featured program that allows you to create invoices, create customer statements, pay your bills, write vendor checks, track inventory, and manage your payroll, as well as perform many other accounting and business-management related tasks.

for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 3

Table Of Contents

Chapters/Lessons:

CHAPTER 15- Reporting

15.1- Graph and Report Preferences

15.2- Using QuickReports

15.3- Using QuickZoom

15.4- Preset Reports

15.5- Modifying a Report

15.6- Rearranging and Resizing Report Columns

15.7- Memorizing Reports

15.8- Memorized Report Groups

15.9- Printing Reports

15.10- Batch Printing Forms

15.11- Exporting Reports to Microsoft Excel

15.12- Saving Forms and Reports as PDF Files

Reporting- Actions

Reporting- Exercise

CHAPTER 16- Using Graphs

16.1- Using Graphs

Using Graphs- Actions

Using Graphs- Exercise

CHAPTER 17- Customizing Forms

17.1- Creating New Form Templates

17.2- Performing Basic Customization

17.3- Performing Additional Customization

17.4- The Layout Designer

17.5- Changing the Grid and Margins in the Layout Designer

17.6- Selecting Objects in the Layout Designer

17.7- Moving and Resizing Objects in the Layout Designer

17.8- Formatting Objects in the Layout Designer

17.9- Copying Objects and Formatting in the Layout Designer

17.10- Adding and Removing Objects in the Layout Designer

17.11- Aligning and Stacking Objects in the Layout Designer

17.12- Resizing Columns in the Layout Designer

Customizing Forms- Actions

Customizing Forms- Exercise

Pages:

10-12

15-20

35-40

CHAPTER 18- Estimating

18.1- Creating a Job

18.2- Creating an Estimate

18.3- Duplicating Estimates

18.4- Invoicing from an Estimate

18.5- Updating Job Statuses

18.6- Inactivating Estimates

18.7- Making Purchases for a Job

18.8- Invoicing for Job Costs

18.9- Using Job Reports

Estimating- Actions

for

Estimating- Exercise

CHAPTER 19- Time Tracking

19.1- Tracking Time and Printing a Blank Timesheet

19.2- Weekly Timesheets

19.3- Time/Enter Single Activity

19.4- Invoicing from Time Data

19.5- Using Time Reports

19.6- Tracking Vehicle Mileage

19.7- Charging Customers for Mileage

Time Tracking- Actions

Sample-

©TeachUcomp, Inc.

44-45

48-50

54-55

58-60

Advanced QuickBooks

Chapters/Lessons:

CHAPTER 20- Payroll

20.1- The Payroll Process

20.2- Creating Payroll Items

20.3- Setting Employee Defaults

20.4- Setting Up Employee Payroll Information

20.5- Creating Payroll Schedules

20.6- Creating Scheduled Paychecks

20.7- Creating Unscheduled Paychecks

20.8- Creating Termination Paychecks

20.9- Voiding Paychecks

20.10- Tracking Your Tax Liabilities

20.11- Paying Payroll Tax Liabilities

20.12- Adjusting Payroll Liabilities

20.13- Entering Liability Refund Checks

20.14- Process Payroll Forms

20.15- Tracking Workers Compensation

Payroll- Actions

Payroll- Exercise

purposes

21.2- Entering Charges on Credit Cards

21.3- Reconciling and Paying Credit Cards

Using Credit Card Accounts- Actions

Using Credit Card Accounts- Exercise

CHAPTER 22- Assets and Liabilities

22.1- Assets and Liabilities

22.2- Creating and Using Other Current Asset Accounts

22.3- Removing Value from Other Current Asset Accounts

22.4- Creating Fixed Asset Accounts

22.5- Creating Liability Accounts

22.6- Setting the Original Cost of the Fixed Asset

22.7- Tracking Depreciation

22.8- The Loan Manager

22.9- The Fixed Asset Item List

Assets and Liabilities- Actions

Assets and Liabilities- Exercise

CHAPTER 23- Equity Accounts

23.1- Equity Accounts

23.2- Recording an Owner’s Draw

23.3- Recording a Capital Investment

Equity Accounts- Actions

Equity Accounts- Exercise

CHAPTER 24- Writing Letters with QuickBooks

24.1- Using the Letters and Envelopes Wizard

24.2- Editing Letter Templates

Writing Letters with QuickBooks- Actions

Writing Letters with QuickBooks- Exercise

Pages:

only!

64-65

72-78

81-82

83-84

87-88

93-95

96-97

100

101

102

103

104

105

Table Of Contents

Chapters/Lessons: Pages:

CHAPTER 25- Company Management

25.1- Viewing Your Company Information

25.2- Setting Up Budgets

25.3- Using the To Do List

25.4- Using Reminders and Setting Preferences

25.5- Making General Journal Entries

25.6- Using the Cash Flow Projector

Company Management- Actions

Company Management- Exercise

CHAPTER 26- Using QuickBooks Tools

106

107

108

109

110-111

112

26.1- Company File Cleanup

26.2- Exporting List Data to an IIF File

26.3- Advanced Importing of Data

26.4- Updating QuickBooks

26.5- Using the Calculator

26.6- Using Portable Company Files

26.7- Using the Calendar

Using QuickBooks Tools- Actions

Using QuickBooks Tools- Exercise

CHAPTER 27-

Using the Accountant’s Review

27.1-

Creating an Accountant’s Copy

27.2-

Transferring an Accountant’s Copy

27.3-

Importing Accountant’s Changes

27.4- Removing Restrictions

Using the Accountant’s Review- Actions

Using the Accountant’s Review- Exercise

CHAPTER 28- Using the Help Menu

28.1- Using Help

Using the Help Menu- Actions

Using the Help Menu- Exercise

QuickBooks Keyboard Shortcuts

113

114

114-115

115

115-116

116

117-119

120

121

122

123

124-125

126

127

128

129

130

131

for evaluation purposes only!

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 5

CHAPTER 15-

Reporting

15.1- Graph and Report Preferences

15.2- Using QuickReports

15.3- Using QuickZoom

15.4- Preset Reports

15.5- Modifying a Report

15.6- Rearranging and Resizing Report Columns

15.7- Memorizing Reports

15.8- Memorized Report Groups

15.9- Printing Reports

15.10- Batch Printing Forms

15.11- Exporting Reports to Microsoft Excel

for evaluation purposes only!

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 6

Reporting

15.1- Graph and Report Preferences:

QuickBooks by changing the settings within the

“Preferences” dialog box. You can access these settings by selecting

“Edit| Preferences…” from the Menu Bar to open the “Preferences” dialog box.

In the

“Preferences” dialog box, click the “Reports & Graphs” icon in the listing of categories shown in the list at the left side of the

“Preferences” window. Then set default personal report preferences on the

“My Preferences” tab and set default company preferences on the “Company Preferences” tab.

Click the

“My Preferences” tab to begin. If you want QuickBooks to prompt you to modify report options prior to displaying a report, then check the

“Prompt me to modify report options before opening a report” checkbox. In the “Reports and Graphs” section, you select how you want QuickBooks to behave when the data within a report needs to be refreshed. You can select either

“Prompt me to refresh,” “Refresh automatically,” or “Don’t refresh.” If you select the “Refresh automatically” option, then when you change a report parameter, QuickBooks will refresh the report to show the change immediately. In the

“Graphs Only” section, you can check the patterns” checkbox. purposes

“Use

Then click the

“Company Preferences” tab. In the “Summary Reports Basis” section, you can select how you prefer your summary reports to be displayed, by default. You can select either

“Cash” or “Accrual.”

In the

“Aging Reports” section, you can select which date to use as the basis for your aging reports- “Age from due date” or “Age from transaction date.” In the “Reports- Show Items by:” section, select the desired option button to choose how to display items within reports. In the

“Reports- Show Accounts by:” section, select the option button to choose how to display accounts within reports. For both items and accounts, you can select to show either the

“Name only,” “Description Only,” or “Name and Description.”

To choose which account balances are included in the

“Operating,” “Investing,” or “Financing” sections of the

“Statement of Cash Flows” report, click the “Classify Cash…” button to open the “Classify

Cash” dialog box. Here you can select an account shown and then check either the “Operating,” “Investing,” or

“Financing” columns to assign its balance to the selected section of the “Statement of Cash Flows” report. Make any changes that you need to here, and then click the

“OK” button to return to the

“Preferences” dialog box. evaluation default by checking the

“Collapse Transactions” checkbox. Note that this may cause report generation to take longer within QuickBooks. for

“Header/Footer” and “Fonts & Numbers” used within

“Format…” button to open the “Report Format Preferences” dialog box. Here you can set your default report preferences for the

“Header/Footer” and “Fonts & Numbers” by clicking the desired tab and then making any changes you want to set as the defaults for your reports.

When you are finished, click the

“OK” button to set the defaults. Note that if you would like to review setting these report properties, please see lesson

“15.5- Modifying a Report.”

Once you have set your default graph and report preferences as desired, you can then click the

“OK” button within the “Preferences” dialog box to apply your preferences.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 7

Reporting

15.2- Using QuickReports:

predesigned reports that display information about the items you are currently viewing onscreen. Whenever you have a list, a register, or a form displayed onscreen, you can click a button or hyperlink to have

QuickBooks create a QuickReport on the data displayed.

For example, if you are viewing the

“Vendor List” and you want to see a transaction history for a selected vendor, you can create a QuickReport. To do this, select the vendor’s name from the “Vendors” list within the Vendor Center and then click the

“QuickReport” hyperlink in the upper-right corner of the Vendor

Center. At that point, you will see a QuickReport appear that lists your transactions with the selected vendor for the current accounting period.

You can also generate a QuickReport on any form displayed in QuickBooks or on any selected record within a list by simply pressing

“Ctrl + Q” on your keyboard with the form displayed or the list entry selected. The QuickReport will display within its own window, which you may close when you are done viewing the report by clicking the small purposes

15.3- Using QuickZoom:

When viewing reports displayed within QuickBooks you will often see transaction data or summary totals of those transactions. You can use the QuickZoom feature when viewing reports within QuickBooks to display the detail data used for summary values in reports. These details will appear in a separate report window. You can also use this feature on any transaction entry displayed within a report to open that transaction itself in a separate window. Also, when viewing graphs in QuickBooks, you can use the

QuickZoom feature to view a breakdown of the graphic data in either a separate graph or separate report.

Basically, you can use this feature to trace report data back to its original sources. As such, this tool can be an easy way to open transaction data from within reports when viewing them onscreen.

To use the QuickZoom feature on any report displayed in QuickBooks, hold your mouse pointer over any line within a report until you see your mouse pointer turn into the QuickZoom symbol. The QuickZoom evaluation for

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 8

Reporting

15.4- Preset Reports:

QuickBooks, QuickBooks also provides dozens of preset reports that you can view, customize, and then save as your own custom reports. The preset reports include many different types of standard business reports, such as the profit and loss report, balance sheet report, accounts receivable reports, sales reports, accounts payable reports, inventory reports, and many other types of useful business reports.

The

“Reports” menu within the Menu Bar groups the preset reports into twelve major categories, which are listed in the table below. To access any report in QuickBooks, click the

“Reports” command in the

Menu Bar, roll your mouse pointer over the desired report category, and then click on the name of the report that you want to open from the side menu of report choices that appears.

Description: Category:

Company & Financial

Customers &

Receivables

Sales

Jobs, Time & Mileage

(QuickBooks Pro only)

Vendors & Payables expenses, and net profit or loss over a specified period of time. Also includes the Balance Sheet

Reports that show the financial position of your business by listing assets, liabilities, and equity.

Also includes the Statement of Cash Flows report that shows the net change in your cash during a period of time.

Contains reports about the receivables side of your company: which invoices are due or overdue, how much each customer owes, etc

… .

Contains reports about what you sold and to whom.

Contains reports about the status and profitability of the jobs/projects you track.

Purchases

Inventory

Employees & Payroll

Banking

Accountant & Taxes

Budgets

List

Contains reports about the payables side of your business: which bills are due or overdue, who those bills are to, etc

… .

Contains reports about your purchase orders and purchase information.

Contains reports to assist you in tracking inventory. forms. evaluation

Contains reports about banking: check details, deposit details, and missing check reports. for

Lets you report on any information stored in a QuickBooks list.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 9

Reporting

15.5- Modifying a Report:

your own custom reports for your company file. You can create reports that either detail or summarize the data stored in your QuickBooks company file. You can create a custom transaction detail or summary report from scratch to specify all of the report’s features, or you can modify one of the preset reports to display the data you want. Modifying a preset report can often save you a few steps in creating a custom report, especially if there is a preset report that closely resembles the data that you want to see. Once you have modified the preset report, you can then memorize the report to save it as your own custom report.

Modifying a preset report is also a very good way to learn about the report customization options that are available in QuickBooks. Once you have mastered the options available for reporting, you can then design your own custom transaction detail and summary reports with much more confidence.

The available report customization options will change, depending on whether or not the report you choose to modify or create is a

“Transaction Detail” or “Summary” report. A “Transaction Detail” report totals from transaction details within QuickBooks. With the purposes

“Transaction Detail” and “Summary” reports within QuickBooks.

If you want to begin modifying a report based on a preset report, first open the desired preset report that you want to use as the basis for your own custom report. Then click the

“Customize Report” button in the toolbar at the top of the preset report to open the

“Modify Report” dialog box. You use the “Modify

Report” dialog box to customize the report settings.

If you want to create a new transaction detail or summary report from scratch within QuickBooks, select

“Reports| Custom Reports” from the Menu Bar and then choose “Transaction Detail” or “Summary.”

In the

“Modify Report” dialog box that appears, you can then set all of the report’s aspects on the tabs shown to create your own custom report from scratch.

In the

“Modify Report” dialog box you will see the major categories of report customization displayed as tabs across the top of the dialog box. These tabs are

“Display,” “Filters,” “Header/Footer,” and “Fonts &

Numbers.

” Generally, on the “Display” tab you can add and/or customize report columns, set summarization evaluation

“Display” and “Filters” tabs allows you to view anything you want to know about your QuickBooks data. Most report modification is made on these two tabs. In addition to the

“Display” and “Filters” tabs, you use the “Header/Footer” tab and the “Fonts &

If you click the you are creating: for section is used to select the range of transaction dates for the report. You can use the

“Dates” drop-down to select from the most commonly used report ranges, or you can use the

“From” and “To” date selectors to specify a starting date and ending date for the records you want to use.

Also for both types of reports, you choose how the report calculates and displays income and expenses by choosing either

“Accrual” or “Cash,” as desired, from the “Report Basis” section.

The next section,

“Columns,” is where you will see the primary difference between the “Transaction

Detail” and “Summary” reports within QuickBooks. If you are creating a “Transaction Detail” report, then in the

“Columns” section you can click on the name of any column shown in the scrollable listing in order to place a checkmark next to it and add it to the report. To remove a column marked as being added to the

Sample-

©TeachUcomp, Inc. Advanced QuickBooks

“Total by” drop-down menu.

Reporting

15.5- Modifying a Report- (cont.):

You can then use the only!

then select either

“Ascending order” or “Descending order” to select the sorting method to use on the selected column’s values.

Next, for

“Transaction Detail” reports, you can click the “Advanced…” button to open the “Advanced

Options” dialog box. Here you will see the “Include” and “Open Balance / Aging” sections. In the “Include” section, you can select either the

“All” option to include all accounts, regardless of whether or not there was any activity within the account for the date range selected, or you can select the

“In Use” option to only use accounts that had activity within the date range specified. For aging reports, you can select to view the customer’s open balance as of the “Current” date or “As of Report Date” by selecting the desired option button. Once you have set any advanced options, if needed, click the

“OK” button in the “Advanced

Options” dialog box to apply them and return to the “Modify Report” window.

Now, for purposes drop-down. You can then choose the values to summarize within the rows by making a choice from the

“Display rows by” drop-down. To the right of that, you can then select to display columns for the “Amount,”

“Quantity,” or “Both” by selecting an option button below the “Display columns for” text. Then, to the right you can choose how to sort the data by making a selection from the

“Sort by” drop-down. You can then select either to perform an

“Ascending” or “Descending” sort on this data by making a choice from the “Sort in” option button group. For some types of report date ranges, such as “This Fiscal Year,” you can also add comparison subcolumns to the report by checking any desired checkboxes shown within the

“Add subcolumns for” section. The choices available will depend on the date range selected. Simply check the checkboxes shown to add those summary subcolumns to your report, if desired.

Finally, if needed, you can click the

“Advanced…” button to open the “Advanced Options” dialog box. For

“Summary” reports, you can choose what records to use in the report by making your choice from the

“Select Columns” and “Select Rows” sections. You can select “Active” accounts to only show data from report period; or evaluation activity. You can then choose the reporting period to use for your data from the

“Reporting Calendar” section. Your choices are

“Fiscal Year,” “Calendar Year,” or “Income Tax Year.” Once you have set any advanced options within the to the

For both for window is used to create and modify the report filters that allow you to further refine your data selection within the report. For example, assuming that you decided to display the

“Account” data within your report on the

“Display” tab, you could then apply a filter to the account data to only display “Expense” account types. This is simply one example of filtering the selected report data, and you can set and modify any of the available filters shown within this tab to customize your report content to create hundreds of possible filter variations.

If the report you are modifying already has filters applied, such as the filters applied to many of the preset reports, you will see the current filters and their settings shown in the

“Current Filter Choices” section of the

“Filters” tab. You can click on any filter shown in this list to view its settings to the left, within the

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 11

Reporting

15.5- Modifying a Report- (cont.):

allow you to select a desired option from one or two possible options.

You can add new filters to the report by selecting the name of a filter to apply from the

“Choose

Filter” list, and then changing its settings as desired. If you want to read a bit more about how a filter that you have selected can be applied, you can click the

“Tell me more…” button at the bottom of this tab to open a help file about the filter and how it can be used in reports. This is a good way to familiarize yourself with many of the report filtering options available.

If you want to completely remove a filter that has been applied to a report, start by selecting the name of the filter to remove from the

“Current Filter Choices” list at the right side of the “Filters” tab. Then click the

“Remove Selected Filter” button to delete the filter from the report. Also note that both the “Display” and

“Filters” tabs contain a “Revert” button that will revert any changes you have made to them, if needed.

You can click the

“Header/Footer” tab in the “Modify Report” window to change the display of content within the header and footer of your report. In the adjacent fields. You then repeat this process for the purposes content you choose in the report footer area. You can then use the

“Alignment” drop-down in the “Page

Layout” section to select the desired layout for your header and footer content within the report.

You can click the

“Fonts & Numbers” tab in the “Modify Report” window to set the display of the font used within the various sections of your report shown in the

“Fonts” section of this tab. You can also set the display of number values in your report within this tab. To set the font used within a report section, start by selecting the report section to format from the

“Change Font For” list. The current font used for the display of the selected item will be shown to the right of the list. Then click the

“Change Font…” button to open a dialog box that will allow you to change the appearance of the text. Select your desired font options from the choices shown and then click the

“OK” button in the dialog box to apply them and return to the “Modify

Report” window. You then repeat this process for any other report sections whose fonts you wish to modify.

You can set the display of negative numbers within the report by making your desired selections from the options shown in the

“Show Negative Numbers” section. You can then set optional display settings for all numbers in the evaluation

“OK” button within the “Modify Report” window to apply your report settings. for

You can rearrange the order of columns from left to right within any QuickBooks report. To do this, first display the report you want to rearrange onscreen. Then place your mouse pointer over the name of the column to move that appears in the column headings at the top of the report until you see your mouse pointer change into a

“hand” icon. You can then click and drag the column left or right. As you are dragging the column, you will see a small upward-pointing red arrow appear between the column names. This arrow indicates where the column will be placed when you release the mouse button. When it is in the desired location, release the mouse button to move the column to the selected location.

You can also resize columns in a report by placing your mouse pointer to the right of the name of the column that you want to resize, where the diamond icon is located, until the mouse pointer changes into a

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 12

Reporting

15.7- Memorizing Reports:

quickly reproduce the same report in the future without having to reapply all of your customization.

To memorize a modified report, click the

“Memorize” button in the toolbar at the top of the modified report’s window to open the “Memorize Report” dialog box. Type a name for the new report into the “Name” field. If you want to save it into a memorized report group, check the checkbox for

“Save in Memorized

Report

Group” and then choose the desired group to save it into from the adjacent drop-down menu. When you are finished naming the memorized report, click the

“OK” button to save it.

Note that when you memorize a report, you cannot name it the same thing as one of the preset reports because that would overwrite them. So you will have to change the name if modifying a report that was originally based on one of the preset reports.

Once you have memorized the report, you can access it in the future by selecting

“Reports|

Memorized

Reports” from the Menu Bar. You will see the names of all of your memorized reports in a side purposes

15.8- Memorized Report Groups:

As you begin to create your own custom reports within QuickBooks, you can create memorized report groups that allow you to organize your memorized reports in a way that makes sense for your company. Memorized report groups allow you to quickly print or view a batch of memorized reports at once.

For illustrative purposes, QuickBooks comes with a few preset memorized report groups that contain common reporting examples for each grouping. You can add your own memorized report to these memorized report groups, or you can create your own groups. When you create a memorized report, note that you can click the checkbox for

“Save in Memorized Report Group” and then select the desired memorized report group to save it into from the adjacent drop-down field.

To create a new memorized report group, select

“Reports| Memorized Reports| Memorized Report

List” from the Menu Bar. In the “Memorized Report List” window, click the “Memorized Report” button and select memorized report group to the list. evaluation

Once you have added reports to the memorized report groups, you can then use the groups that appear within the for

“Memorized Report List” to open the “Process Multiple Reports” window. In this window, you can use the

“Select Memorized Report From” drop-down at the top of the window to select the desired memorized report group that contains the reports you wish to batch display or print. Note that you can choose the

“<Ungrouped Reports>” choice from this drop-down menu to select memorized reports that you have not saved into a memorized report group.

For whichever grouping is selected, the reports within the group will then be displayed in the list below. If there are reports that you do not want to batch print or display, then you can click the checkmark at left side of their name in this list to remove the checkmark and de-select them. the

When you have the reports that you want to batch print or batch display selected, then click either

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 13

Reporting

15.9- Printing Reports:

print and then click the

“Print” button in the toolbar of the report. That will display the “Print Reports” window where you can set options for the printer that you would like to use, page orientation, page breaking behavior, the print range, and the number of copies of the report. Once you have set the options that you would prefer, just click the

“Print” button in the “Print Reports” window to print the currently displayed report.

15.10- Batch Printing Forms:

If you want to

“batch print” a set of forms, like all your paychecks or all your bill payment checks, you can. You can also print mailing labels and other assorted forms. To print forms, you can select

“File| Print

Forms” from the Menu Bar. You can then select the type of form to print from the side menu of choices that appears.

15.11- Exporting Reports to Microsoft Excel:

purposes

You can export report data from QuickBooks to Microsoft Excel. You must have Excel 2000, XP,

2003, 2007, or 2010 for this feature to work and either QuickBooks Pro or Premier. Since the data is exported to Excel, changes that you make to it in Excel will not impact the data in QuickBooks. So feel free to change it as needed in Excel. To do this, open the report that you want to export. Then click the

“Excel” button in the toolbar at the top of the report, and select either the

“Create New Worksheet” or “Update

Existing

Worksheet” commands.

When you export a report to Excel in the dialog box, you can save it as a new sheet in a workbook or create a new workbook. You can also save it as a CSV file, which would be opened using Excel. You can also indicate whether or not you want to preserve the QuickBooks formatting by clicking the

“Advanced…” button. You can then turn on or off several Excel options, including: AutoFit, which sets column widths in evaluation

“Export” button to export your report data. for

In QuickBooks, you can also save any report, invoice, estimate or any other form as a PDF (Portable

Document Format) file that you can then send as an e-mail attachment through your e-mail program.

To save any form or report as a PDF document, just open the form or report that you want to save as a PDF document. Then select

“File| Save as PDF…” from the Menu Bar. This will launch the “Save document as

PDF” dialog box where you can select where you want to save the PDF file and what to name it. Just click the

“Save” button when you are finished to create the PDF file.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 14

ACTIONS-

Reporting

SETTING GRAPH AND REPORT PREFERENCES:

1. Select

“Edit| Preferences…” from the Menu Bar to open the “Preferences” dialog box.

2. In only!

the left side of the “Preferences” window.

3. Click the “My Preferences” tab.

4. If you want QuickBooks to prompt you to modify report options prior to displaying a report, then check the “Prompt me to modify report options before opening a report” checkbox.

5. In the “Reports and Graphs” section, select how you want QuickBooks to behave when the data within a report needs to be refreshed. You can select either “Prompt me to refresh,” “Refresh automatically,” or

“Don’t refresh.”

6. In the “Graphs Only” section, you can check the “Draw graphs in 2D (faster)” option in order to show graphs in 2D versus 3D, if desired.

7. If you prefer to use patterns versus colors when rendering graphs, then you can check the “Use patterns” checkbox.

8. Click the “Company Preferences” tab.

9. In purposes by default. You can select either “Cash” or “Accrual.”

10. In the “Aging Reports” section, select which date to use as the basis for your aging reports- “Age from due date” or “Age from transaction date.”

11. In the “Reports- Show Items by:” section, select the desired option button to choose how to display items within reports.

12. In the “Reports- Show Accounts by:” section, select the option button to choose how to display accounts within reports.

13. To choose which account balances are included in the “Operating,” “Investing,” or “Financing” sections of the “Statement of Cash Flows” report, click the “Classify Cash…” button to open the “Classify Cash” dialog box.

14. Here you can select an account shown and then check either the “Operating,” “Investing,” or “Financing” columns to assign its balance to the selected section of the “Statement of Cash Flows” report.

15. Make any changes needed and evaluation by checking the “Collapse Transactions” checkbox.

17. You can set the default appearance of the “Header/Footer” and “Fonts & Numbers” used within reports

18. Here for

19. When you are finished, click the “OK” button to set the defaults. Note that if you would like to review setting these report properties, please see lesson “15.5- Modifying and Filtering Reports.”

20. Once you have set your default graph and report preferences as desired, you can then click the “OK” button within the “Preferences” dialog box to apply your preferences.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 15

ACTIONS-

Reporting

CREATING A QUICKREPORT:

1. Select an item in a list, open a transaction form, or otherwise display the data.

Press “Ctrl + Q” on your keyboard.

3. The QuickReport will appear within a separate window.

4. Close the report when finished. only!

QUICKZOOMING DATA WITHIN A REPORT OR GRAPH:

1. Open a report or graph.

2. Put your mouse pointer on a data entry in the report or graph until a magnifying glass with a “Z” inside of it appears.

3. Double-click on the entry.

4. The original transaction information or another report showing the transaction appears in a new window.

5. Close it when finished. purposes

MODIFYING A REPORT:

1. To modify a report based on a preset report, open the desired preset report that you want to use as

the basis for your own custom report.

2. Click the “Customize Report” button in the toolbar at the top of the preset report to open the “Modify

Report” dialog box.

3. To create a new transaction detail or summary report from scratch,

select “Reports| Custom

Reports” from the Menu Bar and then choose “Transaction Detail” or “Summary” from the side menu that appears to open the “Modify Report” dialog box.

4. In the “Modify Report” dialog box you will see the “Display,” “Filters,” “Header/Footer,” and “Fonts &

Numbers” tabs. You use the settings on these tabs to modify the associated report content.

5. If

6. For both types of evaluation select a commonly used report date range, or you can use the “From” and “To” date selectors to specify for

8. If you are creating or modifying a

“Transaction Detail” report, then in the “Columns” section click

the name of any column shown in the scrollable listing to place a checkmark next to it and add it to the report.

If you are creating or modifying a “Summary” report, skip to step #17.

9. To remove a column added to the report, click its name to remove the check from the column name and its display from your report.

10. You can choose how to display a total over the transactions shown by making a choice from the “Total by” drop-down menu.

11.

You can then use the “Sort by” drop-down to choose by which column’s values you wish to sort the report. You can choose any report column that you have added to the report from this drop-down menu.

12. You

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 16

ACTIONS-

Reporting

MODIFYING A REPORT-

(CONT’D.):

13. You can click the “Advanced…” button to open the “Advanced Options” dialog box.

14. In only!

whether or not there was any activity within the account for the date range selected, or you can select the “In Use” option to only use accounts that had activity within the date range specified.

15. For aging reports, you can select to view the customer’s open balance as of the “Current” date or “As of

Report Date” by selecting the desired option button.

16. Once you have set any advanced options, if needed, click the “OK” button in the “Advanced Options” dialog box to apply them and return to the “Modify Report” window. You can now skip to step #27.

17. If you are creating

or modifying a “Summary” report, then in the “Columns” section you choose

what type of data to display within the columns of the report by making a selection from the “Display columns by” drop-down.

18. Choose the values to summarize within the rows by making a choice from the “Display rows by” dropdown.

19. You can select below the “Display columns for” label. purposes

20. You can choose how to sort the data by making a selection from the “Sort by” drop-down.

21. You can then select either to perform an “Ascending” or “Descending” sort on this data by making a choice from the “Sort in” option button group.

22. For some types of report date ranges, you can also add comparison subcolumns to the report by checking any desired checkboxes shown within the “Add subcolumns for” section. The choices available will depend on the date range selected. Simply check the checkboxes shown to add those summary subcolumns to your report, if desired.

23. If needed, you can click the “Advanced…” button to open the “Advanced Options” dialog box.

24. For

“Summary” reports, you can choose what records to use in the report by making your choice from the “Select Columns” and “Select Rows” sections. You can select “Active” accounts to only show data from accounts that had activity in the selected report period; “All” accounts, regardless of activity in the selected report period; or “Non-zero” accounts to show any account that has a non-zero balance, regardless of activity.

25. You evaluation

Your choices are “Fiscal Year,” “Calendar Year,” or “Income Tax Year.”

26. Once you have set any advanced options within the “Advanced Options” dialog box, click the “OK”

27. For

Report” window. for

28. If the report you are modifying already has filters applied, you will see the current filters and their settings shown in the “Current Filter Choices” section of the “Filters” tab.

29. You can click on any filter shown in this list to view its settings to the left, within the “Choose Filter” section.

30.

In the “Choose Filter” section, you can change the settings of the filter by using the options available.

Depending upon which filter you select, the options for filtering it may vary. Some filters need you to type a matching value, some allow you to select from a drop-down menu of choices, and some simply allow you to select a desired option from one or two possible options.

31. You can add new filters to the report by selecting the name of a filter to apply from the “Choose Filter”

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 17

ACTIONS-

Reporting

MODIFYING A REPORT-

(CONT’D.):

32. If you want to read about more…” button at the bottom of the tab to open a help file about the currently selected filter. only!

33. To completely remove a filter that has been applied to a report, start by selecting the name of the filter to remove from the “Current Filter Choices” list at the right side of the “Filters” tab.

34. Then click the “Remove Selected Filter” button to delete the filter from the report.

35. Also note that both the “Display” and “Filters” tabs contain a “Revert” button that will revert any changes you have made to them, if needed.

36. Click the “Header/Footer” tab in the “Modify Report” window to change the display of content within the header and footer of your report.

37. In the “Show Header Information” section, check any content that you want to show in the header of your report.

38. Then type the text to display into the adjacent fields.

39. In report.

40. Then type the text to display into the adjacent fields. purposes

41. You can use the “Alignment” drop-down in the “Page Layout” section to select the desired layout for your header and footer content within the report.

42. Click the “Fonts & Numbers” tab in the “Modify Report” window.

43. To set the font used within a report section, start by selecting the report section to format from the

“Change Font For” list.

44. The current font used for the display of the selected item will be shown to the right of the list.

45. Click the “Change Font…” button to open a dialog box that will allow you to change the appearance of the text.

46. Select your desired font options from the choices shown and then click the “OK” button in the dialog box to apply them and return to the “Modify Report” window.

47. Repeat steps #43 through #46 for any other report sections whose fonts you wish to modify.

48. You can set the display of negative numbers within the report by making your desired selections from

49. You evaluation checking any available checkboxes, if desired.

50. Once you have finished modifying your report, click the “OK” button within the “Modify Report” window to apply your report settings. for

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 18

ACTIONS-

Reporting

REARRANGING AND RESIZING REPORT COLUMNS:

1. Display the report that contains the columns you want to rearrange or resize. appears in the column headings at the top of the report until you see your mouse pointer change into a

“hand” icon.

3. Click and drag the column left or right. As you are dragging the column, you will see a small upwardpointing red arrow appear between the column names. This arrow indicates where the column will be placed when you release the mouse button.

4. When it is in the desired location, release the mouse button to move the column to the selected location.

5. To resize columns in a report, place your mouse pointer to the right of the name of the column that you want to resize, where the diamond icon is located, until the mouse pointer changes into a thin vertical line intersected by a horizontal arrow.

6. Click and drag left or right with your mouse at that point to resize the column. purposes

MEMORIZING A REPORT:

To memorize a modified report, click the “Memorize” button in the toolbar at the top of the modified report’s window to open the “Memorize Report” dialog box.

2. Type a name for the new report into the “Name” field.

3. If you want to save it into a memorized report group, check the checkbox for “Save in Memorized Report

Group” and then choose the desired group to save it into from the adjacent drop-down menu.

4. When you are finished naming the memorized report, click the “OK” button to save it.

5. To display a memorized report, select

“Reports| Memorized Reports” from the Menu Bar.

6. Select the name of the memorized report to display from the side menu that appears.

1. To create a new memorized report group

, select “Reports| Memorized Reports| Memorized Report

List” from the Menu Bar.

2. In

3. In for report group.

4. Click the “OK” button to have QuickBooks add this memorized report group to the list.

5. To batch print or batch display reports contained within a memorized report group, select the

name of the memorized report group to print or display within the “Memorized Report List.”

6. Click either the “Display…” or “Print…” buttons shown at the bottom of the “Memorized Report List.”

7. In the “Process Multiple Reports” window that appears, use the “Select Memorized Report From” dropdown to select the memorized report group that contains the reports you wish to batch display or print.

8. The reports within the selected group will then be displayed in the list below. If there are reports that you do not want to batch print or display, click the checkmark at left side of their name in this list to remove

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 19

ACTIONS-

Reporting

PRINTING A REPORT:

1. Open the report you want to print and then click the “Print” button in the toolbar of the report.

2. In only!

orientation, page breaking behavior, the print range, and the number of copies of the report.

3. Once you have set the printing options, click the “Print” button in the “Print Reports” window to print the currently displayed report.

BATCH PRINTING FORMS:

1. Select

“File| Print Forms” from the Menu Bar.

2. Select the type of form to print from the side menu of choices that appears.

EXPORTING A REPORT TO MICROSOFT EXCEL:

1. Open the report that you want to export.

2. Click the “Excel” button in the toolbar at the top of the report. purposes

3. Select either the “Create New Worksheet” or “Update Existing Worksheet” commands from the dropdown menu that appears.

4. In the

“Send Report to Excel” dialog box, select the desired option button to choose how to send the data to Excel.

5. You can click the

“Advanced…” button to open the “Advanced Excel Options” dialog box where you can enable or disable several Excel options.

After setting any advanced options, click the “OK” button to return to the “Send Report to Excel” dialog box.

7. Click the “Export” button to export your report data to excel using the method selected.

1. Open up the form or report that you want to save as a PDF document.

Select “File| Save as PDF…” from the Menu Bar.

for

“File name” field.

Click the “Save” button when you are finished to create the PDF file.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 20

EXERCISES-

Reporting

Purpose:

To be able to modify and memorize reports in QuickBooks only!

Exercises:

Open QuickBooks.

Select

“File| Close Company” from the Menu Bar if you have a company file open to get to the “No

Company

Open” dialog box.

Click the

“Open a sample file” button, and select “Sample product-based business” from the drop-

down of choices.

Click

“OK” on the sample file message box.

Select

“File| Back Up Company| Create Local Backup” from the Menu Bar.

Use the

“Create Backup” window to make a local backup of this company file, so that you may

After backing up the file, select purposes

Bar.

Click the

“Customize Report” button in the report toolbar.

Click the

“Filters” tab.

10.

In the

“Current Filter Choices” section, click on the “Paid Status” field.

11.

In the

“Choose Filter” section, click the “Closed” option.

12.

Click the

“Header/Footer” tab.

13.

Type

“Closed Invoices” into the “Report Title” text box.

14.

Click the

“OK” button.

15.

Click the

“Memorize” button in the report toolbar.

16.

Click the

“OK” button.

17.

Click the

“X” button in the upper right corner of the report to close it.

18.

Select

“Reports| Memorized Reports| Closed Invoices” from the Menu Bar to open the memorized

19.

20.

report again.

Click the evaluation

21.

You can close QuickBooks by selecting

“File| Exit” from the Menu Bar. for

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 21

16.1- Using Graphs

CHAPTER 16-

Using Graphs purposes only!

for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 22

Using Graphs

16.1- Using Graphs:

company, some people like a visual representation of the data.

That’s where graphs come into play in

QuickBooks. A QuickInsight graph shows your data as either a bar graph or a pie chart (except for the

“Budget vs. Actual” and “Net Worth” graphs). The bar graphs and pie charts are just different visual ways of presenting the same financial information that you view in a typical report. QuickBooks has six types of graphs that can provide up to 15 different views of your data. The types of graphs available are shown in the table below.

GRAPH NAME: DESCRIPTION:

Income and Expense Graph

Show the company’s income and expenses for the date range that you specify.

Sales Graph

Accounts Receivable Graph Shows how much your customers owe your company.

Shows how much your company owes its vendors. Accounts Payable Graph

Net Worth Graph

Budget vs. Actual Graph

Shows your company’s net worth.

Shows the difference between budgeted and actual amounts earned or spent.

The QuickInsight graphs that

QuickBooks produces have several features in common. One commonality is that every graph window (except

“Net Worth” and evaluation window, the bar graph will display totals of the for graph above.

Also, every graph comes with a graph toolbar which you can use to customize the graphs in much the same way as reports. Like the reports, you can also use QuickZoom in a graph to see the actual numbers represented by the selected items in the graph. You will typically get summary reports that you can continue to QuickZoom to trace backwards to

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 23

ACTIONS-

Using Graphs

USING GRAPHS:

2. Open the graph that you want to display. only!

3. Use the toolbar at the top of the graph window to change the data displayed in the graph area.

4. Set the date range used for the graph data.

5. You can double-click on any item in a graph to view the detail data using QuickZoom. This will bring up another graph or another report which you can then also QuickZoom. purposes for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 24

EXERCISES-

Using Graphs

Purpose:

To be able to create and modify a graph. only!

Exercises:

Open QuickBooks.

Select

“File| Close Company” from the Menu Bar if you have a company file open to get to the “No

Company

Open” dialog box.

Click the

“Open a sample file” button, and select “Sample product-based business” from the drop-

down of choices.

Click

“OK” on the sample file message box.

Select

“File| Back Up Company| Create Local Backup” from the Menu Bar.

Use the

“Create Backup” window to make a local backup of this company file, so that you may

After backing up the file, select purposes

Menu Bar.

Click the

“Dates…” button in the upper left corner of the graph.

Use the

“Graph Dates” drop-down to select “Last Quarter.”

10.

Click the

“OK” button.

11.

Click the

”By Customer” button in the graph’s toolbar to view the data by customer.

12.

In the

“Show on Pie Chart” section at the bottom of the graph, click “Income.”

13.

Use QuickZoom to double-click the

“Income” column within the bar graph for “Aug” to view the income summary for that month in a separate graph window.

14.

Close the income summary graph window that you just opened.

15.

Click the

“X” in the upper right corner of the Income and Expense graph window to close it.

16.

You can close the company file by selecting

“File| Close Company” from the Menu Bar.

17.

You can close QuickBooks by selecting

“File| Exit” from the Menu Bar. for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 25

CHAPTER 17-

Customizing Forms

17.1- Creating New Form Templates

17.2- Performing Basic Customization

17.3- Performing Additional Customization

17.4- The Layout Designer

for evaluation only!

17.5- Changing the Grid and Margins in the Layout Designer

purposes

17.7- Moving and Resizing Objects in the Layout Designer

17.8- Formatting Objects in the Layout Designer

17.9- Copying Objects and Formatting in the Layout Designer

17.10- Adding and Removing Objects in the Layout Designer

17.11- Aligning and Stacking Objects in the Layout Designer

17.12- Resizing Columns in the Layout Designer

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 26

Customizing Forms

17.1- Creating New Form Templates:

data entry and printed display. In QuickBooks, you can customize the layout of a form to better suit your company’s needs. For example, there are three preset formats for invoices: professional, service, and product. If these templates don’t precisely fulfill your needs, you can customize them as needed. You can also customize much more than just invoices in QuickBooks. The forms that you can customize in

QuickBooks are: invoices, sales receipts, credit memos, statements, purchase orders, and estimates. Note that estimates are only available in QuickBooks Pro and Premier. For each form, you can choose which fields and columns to include, where they are placed in the form, and what they are called. Once you have finished customizing the form, you can save the new layout as a custom template to use at your convenience.

In QuickBooks, you use the

“Basic Customization” and “Additional Customization” windows to make general customization settings for your forms. In these windows, you decide what fields to add to your form then use the boxes and images to the printed version of the form. purposes

You begin the process by selecting

“Lists| Templates” from the Menu Bar to open the “Templates” list. In the

“Templates” list, click the “Templates” button in the lower left corner to show a menu of choices.

To make a new template, select the

“New” command from the pop-up menu. That will present you with the

“Select Template Type” dialog box, where you select the option button that corresponds to the type of form you are trying to create. Then click the

“OK” button to begin customizing your selected form template. for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 27

Customizing Forms

17.2- Performing Basic Customization:

Customization” window. This window displays the most commonly used and basic customization options for forms. You can make any changes to the options shown here, and then examine how your choice impacts the preview of the form displayed at the right side of the window.

At the very top of the

“Basic Customization” window, you will see the name of the new template that you have created shown within the

“Selected Template” section.

In the

“Logo & Fonts” section, you can check the “Use logo” checkbox to add your company logo to the printed version of the form. When you do this, the

“Select Image” dialog box will appear. Use this dialog box to browse for and then select the image file to use as your logo. Once it has been selected, click the

“Open” button to return to the “Basic Customization” window. You can choose a color scheme for your form by making a selection from the

“Select Color Scheme” drop-down menu. You can then click the “Apply

Color

Scheme” button to apply the selected scheme to the preview shown at right. You can change the font used within the sections of the form by selecting a section within the purposes

“Basic Customization” window. Your choices will then be displayed in the preview to the right.

In the

“Company & Transaction Information” section, check the checkboxes for any company information that you want to add to the printed version of the form. If you need to update your company information, note that you can click the

“Update Information…” button to open the “Company Information” window where you can input any company information required. If you do this, click the

“OK” button to return to the

“Basic Customization” window when finished.

Once you have completed the basic customization, you can then choose what you would like to do next. You can click the

“Additional Customization…” button to display the “Additional Customization” window where you can set more advanced features of the template. You can click the

“Layout Designer…” button to open the

“Layout Designer” window where you can change the placement of elements within the printed version of the form. You can click the

“OK” button to save the template into your Template List as it is. You can also click the

“Cancel” button, if needed, to cancel the changes as well as the creation of the new template. for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 28

Customizing Forms

17.3- Performing Additional Customization:

After completing the basic form customization within a template, you can click the

Customization only!

window. The

“Additional Customization” window uses several tabs to display different sets of options for customizing the various sections of the selected type of form. Each area within the form is represented by a tab. Click on the name of the tab that corresponds to the area of the form you would like to customize.

Next, check or uncheck the checkboxes next to the names of the fields underneath the

“Screen” and

“Print” columns to show or hide their display within both the “Screen” version of the form- where you perform data entry, and the

“Print” version of the form- which is the version that you print. Then enter the titles you want to display for those fields into the adjacent text boxes. Note that for some fields you can have a field that appears in one version but not the other, if desired. For example, if you have a custom field that you want to enable within the screen version so that you can enter or view information, but don’t want the customer to see this information within the printed version, then select the

“Screen” checkbox for that field and clear the

“Print” checkbox.

For any tabs that display columnar information, such as the purposes number into the

“Order” field. The columns will be arranged and displayed from left to right from the lowest to the highest number.

To apply print settings to the printed version of the template, click the

“Print” tab. On this tab, you can specify default print settings for the template, if desired.

After performing additional customization on the form template, you can click the

“Layout

Designer

…” button to change the display of elements within the printed version of the form template within the

“Layout Designer” window. Alternately, you can click the “OK” button to return to the “Basic

Customization” window. for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 29

Customizing Forms

17.4- The Layout Designer:

The boxes, labels, and images within the printed version of the form template. Within the only!

window you will see the printed version of the form within the main screen, surrounded by a ruler at the left and top sides for measurement purposes. You should also see the margins of the printed version of the form. There is also a grid displayed onscreen that you can use to align onscreen objects. You can scroll the content within the window to view the objects within the printed version of the form template.

There is a toolbar at the top of the window that contains buttons that allows you to manipulate the selected objects within the window. At the bottom of the window you will see the name of the currently selected object, the current magnification level, the placement of the selected object onscreen, and its dimensions. There are also two buttons, named

“Margins…” and “Grid…” that allow you to control the appearance of the margins and grid within the window. You also have a checkbox for

“Show envelope window,” which you can check in order to display two areas within the window where window envelopes will areas within the form if you intend to use window envelopes for mailing these forms.

You can change the magnification level of the

“Layout Designer” window by clicking the “In” and

“Out” buttons within the “Zoom” button group in the toolbar at the top of the window to increase or decrease the size of the area shown onscreen.

As you learn how to make changes to the objects within the

“Layout Designer,” you may find that you make a mistake or make change that you do not like. You can click the

“Undo” button in the

“Undo/Redo” button group of the toolbar at the top of the window to reverse the changes that you make. If you accidentally click the

“Undo” button too many times, you can click the “Redo” button to reapply a change you have accidentally reversed.

After making your changes within this window, you can click the

“OK” button at the bottom of the window to save the layout changes and return to either the

“Basic Customization” or “Additional

Customization” window, depending upon which window you were previously viewing before you clicked the

“Layout Designer…” button. Note that you can also click the “Cancel” button, if needed, to cancel any layout changes you made and return to the previously opened customization window. In the next few lessons evaluation

“Layout Designer” window. for

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 30

Customizing Forms

17.5- Changing the Grid and Margins in the Layout Designer:

Before you begin changing the layout of objects within the only!

placing the objects into the correct positions within the form so that they will appear correctly when printed.

To change the margin settings for the form, click the

“Margins…” button at the bottom of the window to open the

“Margins” dialog box. Here you can input the desired margin width in inches into the “Top,”

“Bottom,” “Left,” and “Right” fields shown. After settings the margins for the printed form, click the “OK” button to apply them to the view shown within the

“Layout Designer” window.

You can change the settings of the grid shown within the

“Layout Designer” window by clicking the

“Grid…” button at the bottom of the window to open the “Grid and Snap Settings” dialog box. In this dialog box, you can hide the display of the grid within the

“Layout Designer” window by removing the checkmark from the

“Show grid” checkbox. If you do not want to have the objects within the “Layout Designer” window align themselves to the grid when moving them, then remove the checkmark from the

“Snap to grid” making a selection from the purposes settings you want, click the

“OK” button to apply them to the “Layout Designer” window.

17.6- Selecting Objects in the Layout Designer:

Before you can perform any task within the

“Layout Designer” window, you must first learn how to select the form objects shown within the window. You can select an object within the

“Layout Designer” window by clicking it to select it. You can tell when an onscreen object has been selected because it will appear with a border comprised of slashes with eight squares around it. These squares are the resizing handles and are used to resize the object. For some activities you perform within this window, you may also want to select multiple objects simultaneously. When multiple objects are simultaneously selected, actions that you perform are then applied to all selected objects. This is helpful when applying the same formatting evaluation select it and then hold down the

“Shift” key with your free hand. Then click on any other objects that you for

“Shift” key when you are finished. To de-select a selected object or objects, simply click into the blank or empty area within the form.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 31

Customizing Forms

17.7- Moving and Resizing Objects in the Layout Designer:

To move selected objects within the only!

squares until the mouse pointer turns into a double-pointed arrow. At that point, click and drag with your mouse to resize the selected object in either direction shown by the arrows. Note that you cannot resize multiple selected objects using this method. However, you can make multiple selected objects the same height, the same width, or the exact same size. To do this, first simultaneously select the objects that you want to make the same height, width, or size. Then click either the

“Height,” “Width,” or “Size” buttons within the

“Make Same” button group in the toolbar at the top of the window. The selected objects will then be the same height as the tallest, the same width as the longest, or the exact same size as the largest, depending upon which of the three buttons you click.

17.8- Formatting Objects in the Layout Designer:

purposes

“Layout

Designer” window. To do this, double-click the text box or data field that you want to format to open the

“Properties” dialog box. Alternately, you can select a text box or data field and then click the “Properties…” button in the toolbar at the top of the

“Layout Designer” window to also open the “Properties” dialog box.

Within the

“Properties” dialog box you can set the appearance of the text box or data field by changing the settings shown within the

“Text,” “Border,” and “Background” tabs. For text boxes and labels, you can enter the text to display into the text box field that appears at the top of the

“Properties” dialog box.

To set the appearance of the font used to display the text within the object, click the

“Text” tab. In the

“Justification” section, you can select either “Left,” “Right,” or “Center” for the “Horizontal” section and “Top,”

“Bottom,” or “Center” for the “Vertical” section to set the horizontal and vertical text alignment. Note that if you want to indent the first line of text within a text box, then click the

“Indent First Line of Text” checkbox within the

“Horizontal” section. To select the font used to display the text within the object, click the “Font…” button to open the

“Example” dialog box. Here you can change the “Font,” “Font style,” Size,” “Effects,” and evaluation to open the

“Change Color” dialog box. Here you can select any color you want for the font, and then click the for

“Border” tab within the “Properties” dialog box.

Then choose the sides of the object to apply a border to by checking the

“Top,” “Bottom,” “Left,” and “Right” checkboxes, as desired. If you apply a border to the object, you can select the increment used to round the corners of the borders by making a selection from the

“Rounded Corners” section. You can select the desired border pattern to use from the

“Pattern” section, as well as select a desired border thickness from the

“Thickness” section. You can click the “Color” button to open the “Change Color” dialog box. Here you can select a color for the border, and then click the

“OK” button to return to the “Properties” dialog box.

To set a background color for the object, click the

“Background” tab within the “Properties” dialog box. Then check the

“Fill Background” checkbox. After checking this checkbox, click the “Color” button shown to open the

“Change Color” dialog box. Here you can select any color you want for the background of the object, and then click the

“OK” button to return to the “Properties” dialog box.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 32

Customizing Forms

17.9- Copying Objects and Formatting in the Layout Designer:

You can easily copy a selected object within the only!

down and to the right of the original. You can then move the copy to a new place within the window and edit it as needed.

You can also copy the formatting properties of a selected object and then paste only the formatting onto other objects within the

“Layout Designer” window. This is a useful feature that allows you to format the appearance of a single object and then copy that appearance onto other objects without having to manually open the

“Properties” dialog box in order to change the formatting for each item individually.

To copy the formatting of a selected object, click the

“Copy Format” button within the toolbar at the top of the window. The button will then change to the

“End Format” button. You then place your mouse pointer over the object to which you want to paste the formatting of the object whose formatting you just copied. Note that your mouse pointer now appears as a

“paint brush” icon when held over the objects within applied the copied formatting to all of the necessary objects within the are finished, click the purposes selector mouse pointer.

17.10- Adding and Removing Objects in the Layout Designer:

You can also add additional images, data fields, and text boxes to your form by clicking the

“Add” drop-down button in the toolbar at the top of the

“Layout Designer” window. From the drop-down menu that appears, you can then choose the type of object to add to the form:

“Text Box,” “Data Field,” or “Image.”

If you select the

“Text Box” choice, then the “Properties” dialog box will appear onscreen. Enter the text that you want the text box to display into the

“Text” field at the top of the dialog box and then set any formatting properties you want the text box to possess in the

“Text,” “Border,” and “Background” tabs. Then click the

“OK” button to add the text box to the form.

If you select the evaluation

“OK”

If you select the

“Image” choice, then the “Select Image” dialog box will appear onscreen. Use this desired image, click the for must be copied into the

“Images” folder within the company file’s directory. Click the “OK” button within the

“Warning” message box to then copy the image to the correct folder and add the image to your form.

You can remove objects from your form by selecting them and then clicking the

“Remove” button in the toolbar at the top of the window.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 33

Customizing Forms

17.11- Aligning and Stacking Objects in the Layout Designer:

into position and using the grid for alignment of the left and right edges. You must also manually align objects vertically by clicking and dragging the objects and using the grid for alignment. If you wish to center two differently sized object over one another horizontally, it is possible by using the

“Horz” button within the

“Center” button group in the toolbar at the top of the “Layout Designer” window.

To do this, first align the objects vertically within the form. Then select the first object and click the

“Horz” button. Doing this will align the selected object horizontally within the center of the form. Then deselect the first object. Next, select the second object to align horizontally to the first and click the

“Horz” button again. As before, the object will align itself with the center of the form. You can then use the multiple selection method to select both objects as a group, as they should now be centered over one another, and then move the grouped objects as a single unit to the desired destination within the form. Note that if you attempt to perform a multiple selection of objects and then click the

“Horz” button, QuickBooks will not purposes with overlapping images or with text objects that contain a background fill. When you add objects to the form, the newer objects added to the form may appear either on top of or behind older objects within the form if they overlap. You can change the order of overlapping form objects within a stack by first selecting the object whose stacking order you wish to change. Then right-click on the selected object and roll over the

“Order” command in the pop-up menu that appears. From the side menu of choices that then appears, select either

“Bring Forward” to move the object to the foreground of the stack or select “Send Backwards” to send the object to the background of the stack.

Note that sometimes moving stacked objects can disrupt their stacking order. If that occurs on an object for which you have already selected the

“Send Backwards” or “Bring Forwards” command, then the command will appear

“greyed-out” or unavailable within the pop-up menu. If this occurs, you can fix it by selecting each object within the stack individually and then choosing the

“Send Backwards” or “Bring

Forwards” command, based on which command is available, on each object to reset their positions. You evaluation necessary objects within the stack. for

You can resize the columns displayed within the line items area of your printed form, if you have one. To do this, simply click once on the columns shown towards the bottom of the form to select the entire table of columns. Then place your mouse pointer between any two columns to the left or right of the column that you want to resize until your mouse pointer turns into an icon of a single vertical line intersected by a horizontal arrow. When your mouse pointer changes, click and drag either left or right to increase or decrease the size of the columns.

Note that you cannot select the far right or far left column borders within the table to resize those columns. You can only resize the entire table in order to change the far right or far left borders of the table area. Note that you should not expand the size of the table into the margins of the printed form.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 34

ACTIONS-

Customizing Forms

CREATING A NEW FORM TEMPLATE:

1. Select

“Lists| Templates” from the Menu Bar to open the “Templates” list.

2. Click the “Templates” button in the lower left corner of the “Templates” list.

3. Select the “New” command from the pop-up menu. only!

4. In the

“Select Template Type” dialog box, select the option button that corresponds to the type of form template you want to create.

5. Click the “OK” button to begin customizing your selected form template.

PERFORMING BASIC CUSTOMIZATION:

In the “Basic Customization” window you will see the name of the new template that you have created, or the name of the template you are editing, shown within the “Selected Template” section.

2. To add a logo to your form, check the “Use logo” checkbox in the “Logo & Fonts” section to open the

“Select Image” dialog box.

4. Once purposes

5. You can choose a color scheme for your form by making a selection from the “Select Color Scheme” drop-down menu.

6. You can then click the “Apply Color Scheme” button to apply the selected scheme to the preview shown at right.

7. You can change the font used within the sections of the form by selecting a section within the “Change

Font For” list.

8. Then click the “Change Font…” button to open an “Example” dialog box where you can change the font attributes for the selected item.

9. When you have finished making your font choices, click the “OK” button to return to the “Basic

Customization” window.

10. In the “Company & Transaction Information” section, check the checkboxes for any company

11. If evaluation required.

12. If

14. You for where you can set more advanced features of the template.

15. You can click the “Layout Designer…” button to open the “Layout Designer” window where you can change the placement of elements within the printed version of the form.

16. You can click the “OK” button to save the template into your Template List as it is.

17. You can click the “Cancel” button, if needed, to cancel the editing changes as well as the creation of the new template, if applicable.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 35

ACTIONS-

Customizing Forms

PERFORMING ADDITIONAL CUSTOMIZATION:

form you would like to customize. only!

2. Within the selected tab, check or uncheck the checkboxes next to the names of the fields underneath the “Screen” and “Print” columns to show or hide their display within both the “Screen” version of the form- where you perform data entry, and the “Print” version of the form- which is the printed version.

3. Enter the titles you want to display for those fields into the adjacent text boxes.

4. For tabs that display columnar information, such as the “Columns” tab, you can change the order that the columns are displayed from left to right within the line item area of the form by typing a number into the “Order” field. The columns will be arranged and displayed from left to right from the lowest to the highest number.

5. To apply print settings to the printed version of the template, click the “Print” tab to specify default print settings for the template, if desired.

6. After

“Layout Designer” window. purposes

7. Alternately

, you can click the “OK” button to return to the “Basic Customization” window.

USING THE LAYOUT DESIGNER WINDOW:

1. Within the “Layout Designer” window you will see the printed version of the form within the main screen, surrounded by a ruler at the left and top sides for measurement purposes.

2. You should also see the margins of the printed version of the form.

3. There is also a grid displayed onscreen that you can use to align onscreen objects.

4. You can scroll the content within the window to view the objects within the printed version of the form.

5. There is a toolbar at the top of the window that contains buttons that allows you to manipulate the selected objects within the window.

7. There evaluation the margins and grid within the window.

8. You

9. You for buttons within the “Zoom” button group in the toolbar at the top of the window to increase or decrease the size of the area shown onscreen.

10. You can click the “Undo” button in the “Undo/Redo” button group of the toolbar at the top of the window to reverse the changes that you make.

11. If you accidentally click the “Undo” button too many times, you can click the “Redo” button to reapply a change you have accidentally reversed.

12. After making changes within this window, you can click the “OK” button to save the layout changes and return to either the “Basic Customization” or “Additional Customization” window, depending upon which window you were previously viewing before you clicked the “Layout Designer…” button.

13. Note

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 36

ACTIONS-

Customizing Forms

CHANGING THE GRID AND MARGINS IN THE LAYOUT DESIGNER:

1. To change the margin settings

to open the “Margins” dialog box. only!

2. Input the desired margin width in inches into the “Top,” “Bottom,” “Left,” and “Right” fields shown.

3. Click the “OK” button to apply the margins to the view shown within the “Layout Designer” window.

4. To change the settings of the grid

shown within the “Layout Designer” window, click the “Grid…” button at the bottom of the window to open the “Grid and Snap Settings” dialog box.

5. You can hide the display of the grid within the “Layout Designer” window by removing the checkmark from the “Show grid” checkbox.

6. If you do not want to have the objects within the “Layout Designer” window align themselves to the grid when moving them, then remove the checkmark from the “Snap to grid” checkbox.

7. You can change the amount of spacing between the lines in the grid by making a selection from the

“Grid spacing” drop-down menu.

8. Click purposes

SELECTING OBJECTS IN THE LAYOUT DESIGNER:

1. To select an object within

the “Layout Designer” window, by click it to select it.

2. When an onscreen object has been selected, it will appear with a border comprised of slashes with eight squares around it.

3. To select multiple form objects, click the first object to select it.

4. Hold down the “Shift” key with your free hand.

5. Click on any other objects that you want to select as part of the group.

6. Release the “Shift” key when you are finished.

7. To de-select a selected object or objects, click into the blank or empty area within the form.

1. To move selected objects

within the “Layout Designer” window, click and drag the objects from one place to another in the form. for the arrows.

4. To make multiple selected objects the same height, the same width, or the exact same size,

simultaneously select the objects that you want to make the same height, width, or size.

5. Click either the “Height,” “Width,” or “Size” buttons within the “Make Same” button group in the toolbar at the top of the window.

6. The selected objects will then be the same height as the tallest, the same width as the longest, or the exact same size as the largest, depending upon which of the three buttons you click.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 37

ACTIONS-

Customizing Forms

FORMATTING OBJECTS IN THE LAYOUT DESIGNER: click the “Properties…” button in the toolbar at the top of the “Layout Designer” window to open the

“Properties” dialog box.

2. Within the “Properties” dialog box you can set the appearance of the text box or data field by changing the settings shown within the “Text,” “Border,” and “Background” tabs.

3. For text boxes and labels, you can enter the text to display into the text box field that appears at the top of the “Properties” dialog box.

4. To set the appearance of the font used to display the text within the object, click the “Text” tab.

5. In the “Justification” section, you can select either “Left,” “Right,” or “Center” for the “Horizontal” section and “Top,” “Bottom,” or “Center” for the “Vertical” section to set the horizontal and vertical text alignment.

6. If you want to indent the first line of text within a text box, click the “Indent First Line of Text” checkbox within the “Horizontal” section.

7. To

“Example” dialog box.

8. Change purposes choices from the fields within this dialog box.

9. After setting the font attributes, click the “OK” button to return to the “Properties” dialog box.

10. You can set the font color for the object within the “Text” tab by clicking the “Color” button shown to open the “Change Color” dialog box.

11. Select any font color you want, and then click the “OK” button to return to the “Properties” dialog box.

12. To change the border of the selected object, click the “Border” tab within the “Properties” dialog box.

13. Choose the sides of the object to apply a border to by checking the “Top,” “Bottom,” “Left,” and “Right” checkboxes, as desired.

14. If you apply a border to the object, you can select the increment used to round the corners of the borders by making a selection from the “Rounded Corners” section.

15. You can select the desired border pattern to use from the “Pattern” section.

16. You can select a desired border thickness from the “Thickness” section.

17. You

18. Select evaluation

19. To set a background color for the object, click the “Background” tab within the “Properties” dialog box.

20. Check the “Fill Background” checkbox.

21. Click

23. Click for the “OK” button to return to the “Properties” dialog box. the “OK” button within the “Properties” dialog box to apply your changes to the selected text box or label.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 38

ACTIONS-

Customizing Forms

COPYING OBJECTS AND FORMATTING IN THE LAYOUT DESIGNER:

1. To copy a selected object

toolbar at the top of the window. only!

2. To copy the formatting of a selected object

, click the “Copy Format” button within the toolbar at the top of the window. The button will then change to the “End Format” button.

3. Place your mouse pointer over the object to which you want to paste the formatting of the object whose formatting you just copied. Note that your mouse pointer now appears as a “paint brush” icon when held over the objects within the window.

4. Click on the object to paste the copied formatting.

5. Repeat steps #3 and #4 until you have applied the copied formatting to all of the necessary objects within the “Layout Designer” window.

6. When you are finished, click the “End Formatting” button to turn this feature off and return to your normal arrow selector mouse pointer.

ADDING AND REMOVING OBJECTS IN THE LAYOUT DESIGNER: purposes

1. To add objects to the form, click

the “Add” drop-down button in the toolbar at the top of the “Layout

Designer” window.

2. From the drop-down menu that appears, choose the type of object to add to the form: “Text Box,” “Data

Field,” or “Image.”

3. If you select

“Text Box,” then the “Properties” dialog box will appear onscreen.

4. Enter the text that you want the text box to display into the “Text” field at the top of the dialog box and then set any formatting properties you want the text box to possess in the “Text,” “Border,” and

“Background” tabs.

5. Click the “OK” button to add the text box to the form.

6. If you select

“Data Field,” then the “Add Data Field” dialog box will appear onscreen.

7. Click on the name of the data field that you want to add to the form within this dialog box.

8. Click

9. If you select

evaluation

11. After selecting the desired image, click the “Open” button to add the image to the form. for correct folder and add the image to your form.

13. To remove objects from your form, select them and then click

the “Remove” button in the toolbar at the top of the window.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 39

ACTIONS-

Customizing Forms

ALIGNING AND STACKING OBJECTS IN THE LAYOUT DESIGNER: the top, bottom, left and right edges.

2. To center align two differently sized object over one another horizontally, first align the objects

vertically within the form.

3. Select the first object and click the “Horz” button in the toolbar at the top of the “Layout Designer” window to align the selected object horizontally within the center of the form.

4. De-select the first object.

5. Select the second object to align horizontally to the first and click the “Horz” button again to align the object with the center of the form.

6. You can then use the multiple selection method to select both objects as a group, as they should now be centered over one another.

7. Move the grouped objects as a single unit to the desired destination within the form. wish to change.

9. Right-click purposes

10. From the side menu of choices that then appears, select either “Bring Forward” to move the object to the foreground of the stack or select “Send Backwards” to send the object to the background of the stack.

RESIZING COLUMNS IN THE LAYOUT DESIGNER:

1. To resize the columns displayed within the line items area of your printed form, click once on the

columns shown towards the bottom of the form to select the entire table of columns.

2. Place your mouse pointer between any two columns to the left or right of the column that you want to resize until your mouse pointer turns into an icon of a single vertical line intersected by a horizontal arrow.

3. When your mouse pointer changes, click and drag either left or right to increase or decrease the size of the columns. for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 40

EXERCISES-

Customizing Forms

Purpose:

To be able to create and modify an invoice template. only!

Exercises:

Open QuickBooks.

Select

“File| Close Company” from the Menu Bar if you have a company file open to get to the “No

Company

Open” dialog box.

Click the

“Open a sample file” button, and select “Sample product-based business” from the drop-

down of choices.

Click

“OK” on the sample file message box.

Select

“File| Back Up Company| Create Local Backup” from the Menu Bar.

Use the

“Create Backup” window to make a local backup of this company file, so that you may

After backing up the file, select

Click the purposes

“New” command from the pop-up menu that appears.

In the

“Select Template Type” dialog box, click the “Invoice” option button and then click the “OK”

button.

10.

Click the

“Additional Customization…” button at the bottom of the “Basic Customization” window that appears.

11.

Click the

“Header” tab.

12.

Remove the checks for the

“Screen” and “Print” columns next to the “P.O. Number” field.

13.

Place checkmarks under the

“Screen” and “Print” columns next to the “Due Date” field.

14.

Click the

“Layout Designer…” button to launch the “Layout Designer” window.

15.

Double-click the

“Rock Castle Construction” field in the upper left corner of the window to open the

16.

17.

“Properties” dialog box.

On the

Color” dialog box.

Click the evaluation

18.

Click the

“OK” button in the “Properties” dialog box to see the change applied.

19.

20.

21.

Click the

Click the for

22.

Select

“Customers| Create Invoices” from the Menu Bar to open the “Invoices” window.

23.

Select the name of the invoice template that you just created from the

“Templates” drop-down menu in the upper-right corner of the

“Create Invoices” window.

24.

Click the drop-down arrow below the

“Print” button in the “Main” tab within the Ribbon at the top of the invoice screen and select the

“Preview” command from the drop-down menu.

25.

Click the

“Zoom In” button in the toolbar at the top of the “Print Preview” window to view the changes made to the

“Print” version.

26.

Click the

“Close” button in the toolbar at the top of the “Print Preview” window.

27.

Close the

“Create Invoices” window and the “Templates” list window.

28.

29.

Sample-

©TeachUcomp, Inc.

“File| Close Company” from the Menu Bar.

“File| Exit” from the Menu Bar.

Advanced QuickBooks 41

CHAPTER 18-

Estimating

18.1- Creating a Job

18.2- Creating an Estimate

18.3- Duplicating Estimates

18.4- Invoicing from an Estimate

18.5- Updating Job Statuses

18.6- Inactivating Estimates

18.7- Making Purchases for a Job

18.8- Invoicing for Job Costs

18.9- Using Job Reports

purposes only!

for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 42

Estimating

18.1- Creating a Job:

“Jobs” feature within QuickBooks to do this. You can create a job for a customer in the “Customers & Jobs” list. To do this, open the

“Customer Center” window and then select the name of the customer for whom you want to make a job within the

“Customers & Jobs” list. Then click the “New Customer & Job” button in the upper-left corner of the Customer Center and choose the

“Add Job” command from the drop-down to open the

“New Job” window. This window is just like the “New Customer” window, except that the first three tabs in the

“New Job” window will already be filled-in with the selected customer’s information. All you will need to do is enter a name for the job into the

“Job Name” field at the top of the window and then click the “Job

Info” tab to enter the specific job information. On this tab, you can enter a longer description for the job into the

“Job Description” field. You can then enter the type of job into the “Job Type” field, or choose a previous entry made within this field from the drop-down menu. This field can help you categorize the types of projects you perform for customers. You can use its values as a report filter so that you can see income and start date into the purposes completed into the

“Projected End Date” field. When the project finally finishes, enter its actual end date into the

“End Date” field. When you are finished, click the “OK” button to add the job to the “Customers & Jobs” list. Note that the

“Jobs” for the “Customers” appear as “subaccount” entries within this list.

Once you have created a job for a customer, you can then track income and expenses for the customer job by using the

“Customer:Job” column that appears within the line items area in your forms, such as the

“Enter Bills” form, for example. You can also create estimates to give to a customer for a proposed job within QuickBooks.

18.2- Creating an Estimate:

An estimate is a preliminary sales proposal that is often created for a customer’s job. You can create evaluation the estimate amount over several invoices. The ability to bill for only a percentage of the estimate or for from the Menu Bar to open the for

“Customers| Create Estimates”

“Estimates” window. Creating an estimate is very much like creating an invoice, except that the amounts entered into the

“Estimate” form do not affect any posting accounts within the Chart of Accounts.

Within the

“Estimates” window, select the name of the job for which you are creating the estimate from the

“Customer:Job” drop-down menu. Note that you can create estimates for customers without jobs, but that is less common. Then select the desired estimate template to use from the

“Template” drop-down.

Then enter the date the estimate is created into the

“Date” field. Ensure that the correct estimate number is displayed within the

“Estimate #” field, and double-check the customer and job information. After that, click into the

“Item” column within the line item area and select the first item within the estimate. Then enter any associated

“Quantity,” “Rate,” and “Amount” information for the line item. Continue entering line

Sample-

©TeachUcomp, Inc.

“Save & Close” or “Save & New” button to finish.

Advanced QuickBooks 43

Estimating

18.3- Duplicating Estimates:

a couple of different pricing options for a job, and thus needs multiple estimates for the same job. With

QuickBooks, you can easily duplicate and modify an estimate to save time. If you make a copy of an estimate and then make modifications to the copy, as needed, you’ll probably save some typing time. To do this, first display the estimate that you want to duplicate within the

“Estimates” window. Then select “Edit|

Duplicate

Estimate” from the Menu Bar to duplicate the estimate. You should see the next highest estimate number appear within the

“Estimate #” field. You can then edit the details of the estimate, as needed, by changing the information in the line item area of the new estimate. Be sure to save the new estimate that you create when you are finished by clicking either the

“Save & Close” or “Save & New” button.

Note that if you did not want create the second estimate by duplicating an existing estimate, you can always just create a new estimate for the same job, as well. Also, if you choose to duplicate an estimate you should be careful when you select this command from the Menu Bar, as it is located right next to the

“Delete

Estimate” command in the drop-down menu.

18.4- Invoicing from an Estimate:

purposes

Once you have created an estimate and the customer has approved it, you can use the estimate to invoice the customer. You can either send them an invoice for the entire amount or you can send out several invoices for smaller portions of the estimated amount. This is called progress invoicing. Progress invoicing, which is sometimes called progress billing or partial billing, allows you to invoice for jobs that you work on and complete in phases. When using progress invoicing, you start by creating an estimate for the total job. Then as you complete each phase within the job, you transfer items from the original estimate to an invoice. You can specify which items to include on each invoice and change the estimated amounts or percentages of each item. When you use estimates to create progress invoices, you can run reports to help you compare your estimated cost and revenue to your actual cost and revenue.

Create

To create an invoice from an estimate, open the

“Create Invoices” window by selecting “Customers|

“Customer:Job” drop-down field. evaluation all of the available estimates for the selected job. Select the estimate from which you want to create the invoice. Then click the

In the for

“Create invoice for the entire estimate (100%

),” “Create invoice for a percentage of the entire estimate,” or “Create invoice for selected items or for different percentages of each item.

” If you select the first option, then click the “OK” button to transfer all of the items from the estimate to the invoice. If you select the second option, then enter the percentage of the total estimate to place into the current invoice by typing the percentage to bill into the

“% of estimate” field. Then click the “OK” button to transfer the selected percentage of all amounts within the estimate to the invoice window. If you select the third option, then click the

“OK” button to open the “Specify

Invoice Amounts for Items on

Estimate” window.

In this window you will see all of the items listed from the estimate. You can then enter the amounts or percentage of each item to transfer to the invoice by entering the desired percentages, rates, and

Sample-

©TeachUcomp, Inc.

“Show Quantity and Rate” and “Show Percentage”

Advanced QuickBooks 44

Estimating

18.4- Invoicing from an Estimate-

(cont’d.):

amounts for the items you want to transfer to the invoice, click the only!

settings within the

“Jobs and Estimates” category within the “Preferences” dialog box in QuickBooks.

At that point, you will then see the items that you want to bill displayed within the

“Create Invoices” window. You can then double-check and change any information needed within the invoice. After you have done that, click either the

“Save & Close” or “Save & New” buttons to finish.

18.5- Updating Job Statuses:

Each time the status of a job changes, you should update its status in the

“Customers & Jobs” list within the

“Customer Center” window. For instance, if you began work on a job that was labeled “Pending,” you should update the information for the job to reflect the fact that you have started work on it. or by selecting the job within this list and then selecting open the purposes down to change the job’s status. When finished, click the “OK” button to save your changes.

18.6- Inactivating Estimates:

Once you have a customer with multiple outstanding estimates for a job that accepts one of the estimates, you should make any other estimates for that job inactive. When you make an estimate inactive,

QuickBooks keeps a record of it but removes its value from the total estimated amount for the selected job.

To inactivate the estimate, you need to display the estimate you want to inactivate within the

“Estimates” window. One way to do this is to use the “Find” feature within the “Estimates” window. Another way to find the estimate is to open the

“Customer Center” and then select the desired job for which you inactivate within this list and then click the evaluation

“Transactions”

“Customer Center.” You can select the desired estimate to

“Manage Transactions” button at the bottom of the “Transactions” tab. Then choose the

“Edit Selected Transaction” command from the pop-up menu that appears to open the selected estimate in the

“Estimates” window. for

“Estimates” window, click the

“Mark As Inactive” button within the “Main” tab of the Ribbon at the top of the window. Then click the “Save

Close” button to save your changes and close the window.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 45

Estimating

18.7- Making Purchases for a Job:

costs later. To do this, simply use the drop-down within the

“Customer:Job” column that appears in the line item area within forms such as the

“Enter Bills” window to select the name of the customer:job that you will be billing for the purchase as you create a bill in the

“Enter Bills” window.

Notice that this column appears in almost every type of transaction form within the line items area, from the

“Create Purchase Orders” and “Enter Bills” windows to the “Write Checks” and “Enter Credit Card

Charges” window. You use the “Customer:Job” column to assign line item amounts to a customer:job for future billing or to simply record job costing amounts.

For the line items entered into many forms, if you want to bill the customer for the costs later then ensure that there is a checkmark within the

“Billable?” column within the same line item area for each line item that you want to bill back to the customer. If you wish to make the line item non-billable to simply record the job costing information but not be able to bill the cost, then simply click the checkbox for that line purposes

18.8- Invoicing for Job Costs:

If you assign job costs that you incur to the correct customer:job, then the next time that you create an invoice for that customer:job, you can bill for the job costs. To do this, create an invoice by selecting

“Customers| Create Invoices” from the Menu Bar. Then use the “Customer:Job” drop-down to select the customer:job to which you have assigned job costs.

When you do this, QuickBooks will then display the

“Billable Time/Costs” window. To bill the costs, click the

“Select the outstanding billable time and costs to add to this invoice?” option button and then click the

“OK” button to continue and open the “Choose Billable Time and Costs” window. Note that even if you select not to bill the time and costs at this moment, you can later click the

“Add Time/Costs” button that appears within the

“Main” tab of the Ribbon at the top of the invoice to open the “Choose Billable Time and

Costs” window.

In the evaluation checkmark. On the

“Expenses” tab, you can even markup expenses if needed, by entering the amount or for

“Markup Amount or %” field. Note that if you mark up the selected items by a percentage, then you must enter the percent sign into this field, otherwise QuickBooks will assume it is an amount. If you mark up expenses, select the income account to which you attribute the markup by selecting it from the

“Markup Account” drop-down. If the selected expenses are taxable, check the

“Selected expenses are taxable” checkbox. In both tabs, you can check the “Print selected time and costs as one item” checkbox to add all of the billable time and costs to the invoice as a single item, if needed. Once you have checked the billable items and expenses, click the

“OK” button to add them to the invoice. You can then complete and save the invoice as you normally would, and close the

“Create

Invoices” window when you are finished.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 46

Estimating

18.9- Using Job Reports:

information, and estimate information. You can access these reports from the

“Reports” menu within the

Menu Bar, under the

“Jobs, Time & Mileage” report category in QuickBooks Pro. The names of the reports and descriptions of their content are listed below.

REPORT NAME:

Job Profitability Summary

Job Profitability Detail

Job Estimates vs. Actuals Summary

DESCRIPTION:

Summarizes the money made from each customer’s job.

Shows the details of how much was made for a single customer’s job. actual revenue for all customers and jobs.

Job Estimates vs. Actuals Detail

For a selected customer or job, compares estimated costs to actual costs and estimated revenues to actual revenues.

Job Progress Invoices vs. Estimates

Item Profitability

Item Estimates vs. Actuals

Compares estimates to the estimate’s progress invoices.

Shows how much money has been made from each item sold.

For each item, compares estimated cost to actual cost and estimated revenue to actual revenue.

Profit & Loss by Job

Estimates by Job

Unbilled Costs by Job

Open Purchase Orders by Job for

Shows how much money has been made or lost on each job. evaluation

Shows all unbilled costs for each customer job.

Shows all open purchase orders for each customer job.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 47

ACTIONS-

Estimating

TO CREATE A NEW JOB:

1. Open the “Customer Center” window.

2. Select only!

3. Click the “New Customer & Job” button in the upper-left corner of the Customer Center and choose the

“Add Job” command from the drop-down to open the “New Job” window.

4. Enter a name for the job into the “Job Name” field at the top of the window.

5. Click the “Job Info” tab.

6. Enter a description for the job into the “Job Description” field.

7. Enter the type of job into the “Job Type” field, or choose a previous entry made within this field from the drop-down menu.

8. Select the status of the job from the “Job Status” drop-down field.

9. When the job starts, enter the start date into the “Start Date” field.

10. You can then enter the best estimate as to when the job will be completed into the “Projected End Date” field.

11. When

12. Click the “OK” button to add the job to the “Customers & Jobs” list. purposes

TO CREATE AN ESTIMATE:

1. Select

“Customers| Create Estimates” from the Menu Bar to open the “Estimates” window.

2. Select the name of the job for which you are creating the estimate from the “Customer:Job” drop-down menu. Note that you can create estimates for customers without jobs, but that is less common.

3. Select the desired estimate template to use from the “Template” drop-down.

4. Enter the date the estimate is created into the “Date” field.

5. Ensure that the correct estimate number is displayed within the “Estimate #” field, and double-check the customer and job information.

6. Click into the “Item” column within the line item area and select the first item within the estimate.

7. Then evaluation tab of the Ribbon at the top of the “Estimates” window.

10. Click for

TO DUPLICATE AN ESTIMATE:

1. Display the estimate that you want to duplicate within the “Estimates” window.

2. Select

“Edit| Duplicate Estimate” from the Menu Bar to duplicate the estimate. You should see the next highest estimate number appear within the “Estimate #” field.

3. Edit the details of the estimate, as needed, by changing the information in the line item area of the new estimate.

You can then print the estimate to send to the customer by clicking the “Print” button within the “Main” tab of the Ribbon at the top of the “Estimates” window.

5. Click

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 48

ACTIONS-

Estimating

CREATING AN INVOICE FROM AN ESTIMATE:

1. Open

2. Select only!

3. In the

“Available Estimates” window, select the estimate from which you want to create the invoice.

4. Click the “OK” button to continue.

5. In the “Create Progress Invoice Based on Estimate” window that then appears, select the option button for the invoicing option that you want to use for the invoice. You can select either “Create invoice for the entire estimate (100%),” “Create invoice for a percentage of the entire estimate,” or “Create invoice for selected items or for different percentages of each item

.”

6. If you select the first option, click the “OK” button to transfer all of the items from the estimate to the invoice. Skip to step #11.

7. If you select the second option, enter the percentage of the total estimate to place into the current invoice by typing the percentage to bill into the “% of estimate” field. Then click the “OK” button to

8. If you select the third option, click purposes invoice by entering the desired percentages, rates, and quantities into the columns shown.

9. Once you have entered the amounts for the items you want to transfer to the invoice, click the “OK” button to transfer the items to the invoice.

10. At that point, you will then see the items that you want to bill displayed within the “Create Invoices” window.

11. Double-check and change any information needed within the invoice.

12. Click either the “Save & Close” or “Save & New” buttons to finish.

UPDATING A JOB STATUS:

Open the “Customer Center” window.

2. Double-click

3. Select the “Job Info” tab. evaluation

4. Use the “Job Status” drop-down to change the job’s status.

5. Click for

INACTIVATING AN ESTIMATE:

1. Display the estimate you want to inactivate within the “Estimates” window.

2. Click the “Mark As Inactive” button within the “Main” tab of the Ribbon at the top of the window.

3. Click the “Save & Close” button to save your changes and close the window.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 49

ACTIONS-

Estimating

MAKING PURCHASES FOR A JOB:

1. Open the desired purchasing form, such as the or

“Enter Credit Card Charges” window. only!

2. Enter the vendor information.

Enter the first “Item” or record the expense for the job in the line items area.

4. For each line item entered, use the dropdown within the “Customer:Job” column to select the name of the customer:job you will be billing for the line item.

5. To bill the customer for the costs later, ensure that there is a checkmark within the “Billable?” column for the same line item. If you wish to make the line item non-billable to record the job costing information only, then click the checkbox for that line item to remove the check from the checkbox.

6. You can then save and close the form as normal.

INVOICING FOR JOB COSTS:

1. Create

2. Use purposes

3. In the

“Billable Time/Costs” window that appears, to enter the billable costs you can click the “Select the outstanding billable time and costs to add to this invoice?” option button and then click the “OK” button to continue and open the “Choose Billable Time and Costs” window.

4. Note that even if you select not to bill the time and costs at this moment, you can later click the “Add

Time/Costs” button that appears within the “Main” tab of the Ribbon at the top of the invoice to open the

“Choose Billable Time and Costs” window.

5. In the “Choose Billable Time and Costs” window, click the “Expenses” and “Items” tabs, as needed, to display the outstanding expenses recorded and items purchased for the selected customer:job.

6. Select the expenses to bill to the customer by clicking the leftmost column next to each line item to mark it with a checkmark.

7. On the “Expenses” tab, you can markup expenses by entering the amount or percentage to mark up the evaluation from the “Markup Account” drop-down.

9. If

10. In for

11. Once you have checked the billable items and expenses, click the “OK” button to add them to the invoice.

12. Complete and save the invoice, and close the “Create Invoices” window when finished.

CREATING “JOBS, TIME & MILEAGE” REPORTS:

Select “Reports| Jobs, Time & Mileage” from the Menu Bar.

2. Click on the name of the desired report to display within this category from the side menu of choices that Sample-

©TeachUcomp, Inc. Advanced QuickBooks 50

EXERCISES-

Estimating

Purpose:

To be able to create a job, an estimate, and an invoice based on an estimate. only!

Exercises:

Open QuickBooks.

Select

“File| Close Company” from the Menu Bar if you have a company file open to get to the “No

Company

Open” dialog box.

Click the

“Open a sample file” button, and select “Sample product-based business” from the drop-

down of choices.

Click

“OK” on the sample file message box.

Select

“File| Back Up Company| Create Local Backup” from the Menu Bar.

Use the

“Create Backup” window to make a local backup of this company file, so that you may

Select

Within the

“Customers & Jobs” tab, select “Natiello, Ernesto.” purposes

Click the

“New Customer & Job” button above the tab, and then select “Add Job” from the menu.

10.

In the

“New Job” window, type “Bathroom Remodel” into the “Job Name” field.

11.

Click the

“Job Info” tab, and enter “Bathroom Remodel” into the “Job Description” field.

12.

Select

“Remodel” from the “Job Type” drop-down.

13.

Select

“Pending” from the “Job Status” drop-down.

14.

Delete the values from the

“Projected End Date” and the “End Date” fields.

15.

Click the

“OK” button to create the new job.

16.

Ensure that the

“Bathroom Remodel” job is selected within the “Customers & Jobs” tab and then select

“Customers| Create Estimates” from the Menu Bar.

17.

Click into the first row under the

“Item” column, and type “Removal.”

18.

Press the

“Tab” key on your keyboard twice to move to the “Qty” column and type “40.”

19.

20.

Click the

Ensure that the select evaluation

21.

Press the

“Tab” key on your keyboard to exit the “Customer:Job” field.

22.

23.

In the

In the for

”

24.

Type

“25” into the “% of estimate” text box, and then click the “OK” button to continue.

25.

Use the

“Template” drop-down in the upper right corner of the “Create Invoices” window to select the

“Progress Invoice” template.

26.

Click the

“Save & Close” button to save the progress invoice.

27.

Close the

“Customer Center” window.

28.

You can close the company file by selecting

“File| Close Company” from the Menu Bar.

29.

You can close QuickBooks by selecting

“File| Exit” from the Menu Bar.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 51

CHAPTER 19-

Time Tracking

19.1- Tracking Time and Printing a Blank Timesheet

19.2- Weekly Timesheets

19.3- Time/Enter Single Activity

19.4- Invoicing from Time Data

19.5- Using Time Reports

19.6- Tracking Vehicle Mileage

19.7- Charging Customers for Mileage

purposes only!

for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 52

Time Tracking

19.1- Tracking Time and Printing a Blank Timesheet:

person spends on each job. The person whose time you track can be an employee, an owner, a partner, or a subcontractor, as long as you have created the subcontractor as a vendor within the

“Vendors” list.

You can then use the time data to perform tasks like invoicing a customer for job labor, providing hours worked on an employee’s paycheck, tracking the cost of an employee’s gross pay by job, or simply reporting the number of hours worked by a person, on a job, or with an item, like equipment.

You can enter data into QuickBooks using the

“Weekly Timesheet” window or the “Time/Enter

Single

Activity” window. If you want to enter time for multiple jobs or multiple days, then the “Weekly

Timesheet” window is the best choice. If you tend to enter a lot of detailed notes about your activities or prefer to enter time data as you complete an activity, then use the

“Time/Enter Single Activity” window.

Either way, the time information that you record in one displays in the other. They are simply two different ways of recording the same information. So- don’t enter the same data into both forms, as that would duplicate the time data that is recorded! purposes

“Weekly

Timesheet” window by selecting “Employees| Enter Time| Use Weekly Timesheet” from the Menu Bar.

Within this window, you can then click the drop-down arrow that appears to the right of the

“Print” button within the toolbar at the top of the window. Then choose the

“Print Blank Timesheet…” command from the drop-down menu to open the

“Print Timesheets” window. You can then click the “Print” button to print the blank timesheets. for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 53

Time Tracking

19.2- Weekly Timesheets:

You can use the only!

Timesheet” window by choosing “Employees| Enter Time| Use Weekly Timesheet” from the Menu Bar.

In the

“Weekly Timesheet” window, use the “Name” drop-down to select the name of the individual for whom you want to view or track time. If you want to change the week you are viewing, select any date within the week you want to view from the calendar selector button at the top of the window. The days of the selected week for the selected individual will then be displayed in the window.

Then enter the

“Customer:Job,” “Service Item,” “Payroll Item,” if you enable your employees to enter hours via the timesheet,

“WC Code,” “Notes,” and the hours per day that the selected person spent doing the selected type of work into the columns of the same names that are displayed.

Note that you can click the

“Copy Last Sheet” button in the lower left corner of this window to copy any hours that were entered for the selected person for the previous week forward into the currently consistent timesheet entries.

After entering the information, click the purposes the window when you are finished.

19.3- Time/Enter Single Activity:

You can use the

“Time/Enter Single Activity” timesheet to enter the hours worked by a person, what they did, for which customer:job, and, optionally, how much you paid them to do it for a single day. You can open the

“Time/Enter Single Activity” window by selecting “Employees| Enter Time| Time / Enter Single

Activity” from the Menu Bar.

Within the

“Time/Enter Single Activity” window, select the date for the activity from the “Date” calendar selector field. Use the

“Name” drop-down to select the person whose time you are entering. Then enter the

“Customer:Job,” “Service Item,” “Payroll Item,” if you enable your employees to enter hours via the timesheet, evaluation button when you begin the activity,

“Pause” when you want to pause the time recording, and “Stop” when for

“Duration” field. When you

“Save & Close” button to save the time and close the window.

19.4- Invoicing from Time Data:

After you have recorded the time that your employees or subcontractors spend performing services for a customer’s job, you can bill the customer for the work performed in an invoice. To do this, create an invoice by selecting

“Customers| Create Invoices” from the Menu Bar. Then use the “Customer:Job” dropdown to select the customer:job to which you have assigned billable time.

When you do this, QuickBooks will then display the

“Billable Time/Costs” window. To bill the time, click the

“Select the outstanding billable time and costs to add to this invoice?” option button and then click the

Sample-

Advanced QuickBooks

“Add Time/Costs” button that

54 ©TeachUcomp, Inc.

Time Tracking

19.4- Invoicing from Time Data-

(cont’d.):

Costs

” window.

In the only!

that have been recorded for the selected customer:job. Select the hours to bill to the customer by clicking the leftmost column next to each line item to mark it with a checkmark.

If you would like to choose how QuickBooks will import the timesheet data into the invoice, then click the

“Options…” button in the upper right corner of the tab to open the “Options for Transferring Billable

Time” dialog box. Here you can select the desired option button to indicate how you want the time data to be imported. Then click the

“OK” button to set your desired preference and return to the “Time” tab.

You can check the

“Print selected time and costs as one item” checkbox to add all of the selected billable time and costs to the invoice as a single item, if needed. Once you have checked the billable hours, click the

“OK” button to add them to the invoice. You can then complete and save the invoice as you normally would, and close the

“Create Invoices” window when you are finished.

19.5- Using Time Reports:

purposes

QuickBooks provides you with reports that assist you in time tracking. They can be accessed by selecting

“Reports| Jobs, Time & Mileage” from the Menu Bar in QuickBooks Pro. The following is a listing of the names and functions of the time reports available in QuickBooks Pro 2013

DESCRIPTION: REPORT NAME:

Time by Job Summary

Time by Job Detail

Shows hours worked totaled by customer job, and then totaled by service item per job.

Time by Name

Time by Item

for

Lists each time activity (work done by a person for a particular customer or job on a specific date), and shows whether the work is evaluation

Shows hours worked (or tracked as sick or vacation time), subtotaled first by the name of the person who performed the work, and then by the customer job for whom the work was performed.

Totals the hours by service item, and then subtotals the hours worked by customer job.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 55

Time Tracking

19.6- Tracking Vehicle Mileage:

mileage for tax purposes. You can also assign mileage to a specific customer job, so that you can bill the customer for the mileage. There are some limitations to the use of this data, however. You cannot use the data to reimburse employees or vendors for mileage. You also cannot track specific vehicle expenses like tolls paid, gas and other types of expenses. You can work around this by simply entering these charges as a bill, which can be charged to the customer. Also, vehicle mileage information from Quicken will not be imported into QuickBooks.

Generally, you can use either the Standard mileage rate or the actual expenses for calculating vehicle mileage expenses. You should consult with your tax advisor or the IRS to determine which method you should use, if any.

To enter vehicle mileage, select

“Company| Enter Vehicle Mileage…” from the Menu Bar. This will launch the

“Enter Vehicle Mileage” window. Use the “Vehicle” drop-down at the top of the window to select and then use the the purposes vehicles if you would like to enter a detailed description about the vehicles used by your company.

Next, use the

“Trip Start Date” and “Trip End Date” calendar drop-down fields to input the start and end dates of the trip you are recording. Then input the odometer start and end values into the boxes provided. That will fill-in the

“Total Miles” by subtracting the two values. You may also simply type the total miles of the trip into the

“Total Miles” box, if needed.

If you want to assign the miles to a specific customer or job, check the

“Billable” checkbox in the upper right corner of the window and then use the

“Customer:Job” drop-down to select which customer or job to assign the mileage. You can then use the

“Item” drop-down to select your “Mileage” item from your

“Item List.” If you are going to be reimbursed for mileage by the customer, you will need to create a

“Mileage” item as an “Other Charge” or “Service” type item within the “Item List” so that you can use it to collect the mileage amounts in an invoice at a later point. After entering the mileage, feel free to add any additional notes into the

“Notes” field and then click the “Save & Close” button when you are finished.

Note the button, you will be presented with the evaluation column next to the specified date. You should check with the IRS for any effective rate changes and make mileage rates. for

“Close” button when you are finished entering the

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 56

Time Tracking

19.7- Charging Customers for Mileage:

you can then invoice the customer:job to collect the mileage. To do this, create an invoice by selecting

“Customers| Create Invoices” from the Menu Bar. Then use the “Customer:Job” drop-down to select the customer:job to which you have assigned billable mileage.

When you do this, QuickBooks will then display the

“Billable Time/Costs” window. To bill the mileage, click the

“Select the outstanding billable time and costs to add to this invoice?” option button and then click the

“OK” button to continue and open the “Choose Billable Time and Costs” window. Note that even if you select not to bill the mileage costs at this moment, you can later click the

“Add Time/Costs” button that appears within the

“Main” tab of the Ribbon at the top of the invoice to open the “Choose Billable

Time and

Costs” window.

In the

“Choose Billable Time and Costs” window, click the “Mileage” tab to display the billable mileage recorded for the selected customer:job. Select the mileage to bill to the customer by clicking the leftmost column next to each line item to mark it with a checkmark. purposes dialog box. Here you can select the desired option button to indicate how you want the mileage data to be imported. Then click the

“OK” button to set your desired preference and return to the “Mileage” tab.

You can check the

“Print selected time and costs as one item” checkbox to add all of the selected billable time and costs to the invoice as a single item, if needed. Once you have checked the billable mileage, click the

“OK” button to add them to the invoice. You can then complete and save the invoice as you normally would, and close the

“Create Invoices” window when you are finished. for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 57

ACTIONS-

Time Tracking

TO PRINT BLANK WEEKLY TIMESHEETS:

1. Select

“Employees| Enter Time| Use Weekly Timesheet” from the Menu Bar.

2. Click the droponly!

Timesheet” window.

Select the “Print Blank Timesheet….” command from the drop-down menu that appears.

In the “Print Timesheets” window that appears, click the “Print” button.

USING A WEEKLY TIMESHEET:

Select “Employees| Enter Time| Use Weekly Timesheet” from the Menu Bar.

2. In the

“Weekly Timesheet” window, use the “Name” drop-down to select the name of the individual for whom you want to view or track time.

3. To change the week you are viewing, select any date within the week you want to view from the individual will then be displayed in the window.

4. Enter purposes the timesheet, “WC Code,” “Notes,” and the hours per day that the selected person spent doing the selected type of work into the columns of the same names that are displayed.

5. You can click the “Copy Last Sheet” button in the lower left corner of this window to copy any hours that were entered for the selected person for the previous week forward into the currently selected week.

6. Click the “Save & Close” button to save the time recorded and close the window when you are finished.

USING THE TIME/ENTER SINGLE ACTIVITY WINDOW:

1. Select

“Employees| Enter Time| Time / Enter Single Activity” from the Menu Bar.

2. Within the “Time/Enter Single Activity” window, select the date for the activity from the “Date” calendar selector field.

3. Use

4. Enter evaluation the timesheet, “WC Code,” and “Notes” that you want to record into the fields of the same names.

5. Enter the duration of time to record this activity into the “Duration” field. for can click the “Start” button when you begin the activity, “Pause” when you want to pause the time recording, and “Stop” when you have finished the activity in order to record the actual time as an entry in the “Duration” field.

7. When you are finished entering time data, just click the “Save & Close” button to save the time and close the window.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 58

ACTIONS-

Time Tracking

INVOICING A CUSTOMER BASED ON TIME:

1. Select

“Customers| Create Invoices” from the Menu Bar.

2. Use the only!

3. In the

“Billable Time/Costs” window, click the “Select the outstanding billable time and costs to add to this invoice?” option button and then click the “OK” button to continue and open the “Choose Billable

Time and

Costs” window.

4. Note that even if you select not to bill the time and costs at this moment, you can later click the

“Add

Time/Costs” button that appears within the “Main” tab of the Ribbon at the top of the invoice to open the

“Choose Billable Time and Costs” window.

5. In the

“Choose Billable Time and Costs” window, click the “Time” tab to display the billable hours that have been recorded for the selected customer:job.

6. Select the hours to bill to the customer by clicking the leftmost column next to each line item to mark it with a checkmark.

“Options…” button in the upper right corner of the tab to open the “Options for Transferring Billable

Time” dialog box.

8. Here you can select the desired option button to indicate how you want the time data to be imported.

9. Then click the

“OK” button to set your desired preference and return to the “Time” tab.

10. You can check the

“Print selected time and costs as one item” checkbox to add all of the selected billable time and costs to the invoice as a single item, if needed.

11. Once you have checked the billable hours, click the

“OK” button to add them to the invoice.

12. You can then complete and save the invoice as you normally would, and close the

“Create Invoices” window when you are finished.

DISPLAYING TIME TRACKING REPORTS:

Select “Reports| Jobs, Time & Mileage” from the Menu Bar. evaluation

TO ENTER VEHICLE MILEAGE:

1. Select

2. In for for which vehicle you will be entering mileage.

3. You can type a new vehicle description into this dialog box and then use the “Quick Add” feature to quickly add the vehicle to the “Vehicle List.”

4. Note that you can click the “Vehicle List” button in the toolbar at the top of the “Enter Vehicle Mileage” window to open the list of vehicles if you would like to enter a detailed description about the vehicles used by your company.

5. Use the “Trip Start Date” and “Trip End Date” calendar drop-down fields to input the start and end dates of the trip you are recording.

6. Input the odometer start and end values into the boxes provided. That will fillin the “Total Miles” by

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 59

ACTIONS-

Time Tracking

TO ENTER VEHICLE MILEAGE-

(CONT’D.):

only!

to assign the mileage.

8. Then use the “Item” drop-down to select your “Mileage” item from your “Item List.”

9. If you are going to be reimbursed for mileage by the customer, you will need to create a “Mileage” item as an “Other Charge” or “Service” type item within the “Item List” so that you can use it to collect the mileage amounts in an invoice at a later point.

10. After entering the mileage, feel free to add any additional notes into the “Notes” field.

11. Click the “Save & Close” button when you are finished.

12. To enter mileage rates, click the

“Mileage Rates” button at the top of the “Enter Vehicle Mileage” window to open the “Mileage Rates” dialog box.

13. Here you can input the most recent “Effective Date” of the federal mileage rate in the column available.

14. Enter changes and make sure that you keep this information current.

15. Click purposes

TO INVOICE A CUSTOMER FOR BILLABLE MILEAGE:

1. Create an invoice by selecting “Customers| Create Invoices” from the Menu Bar.

2. Use the “Customer:Job” drop-down to select the customer:job to which you have assigned billable mileage.

3. In the “Billable Time/Costs” window, click the “Select the outstanding billable time and costs to add to this invoice?” option button and then click the “OK” button to continue and open the “Choose Billable

Time and Costs” window.

4. Note that even if you select not to bill the mileage costs at this moment, you can later click the “Add

Time/Costs” button that appears within the “Main” tab of the Ribbon at the top of the invoice to open the

5. In evaluation

6. Select the mileage to bill to the customer by clicking the leftmost column next to each line item to mark it with a checkmark.

7. If for box.

8. Here you can select the desired option button to indicate how you want the mileage data to be imported.

9. Then click the “OK” button to set your desired preference and return to the “Mileage” tab.

10. You can check the “Print selected time and costs as one item” checkbox to add all of the selected billable time and costs to the invoice as a single item, if needed.

11. Once you have checked the billable mileage, click the “OK” button to add them to the invoice.

12. You can then complete and save the invoice as you normally would, and close the “Create Invoices” window when you are finished.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 60

EXERCISES-

Time Tracking

Purpose:

To be able to enter hours worked into a weekly timesheet. only!

Exercises:

Open QuickBooks.

Select

“File| Close Company” from the Menu Bar if you have a company file open to get to the “No

Company

Open” dialog box.

Click the

“Open a sample file” button, and select “Sample product-based business” from the drop-

down of choices.

Click

“OK” on the sample file message box.

Select

“File| Back Up Company| Create Local Backup” from the Menu Bar.

Use the

“Create Backup” window to make a local backup of this company file, so that you may

After backing up the file, select purposes

Bar.

Use the

“Name” drop-down to select “Gregg O. Schneider” from the list.

Click into the next available blank row in the

“Customer:Job” column and select “Natiello Ernesto:

Bathroom

Remodel” from the list to select the job created in the Exercise from Chapter 18.

10.

Click into the

“Service Item” column, and type “Removal.”

11.

Type

“8” under the “Tu,” “W,” “Th,” and “F” columns to the right in that row.

12.

Click the

“Save & Close” button.

13.

You can close the company file by selecting

“File| Close Company” from the Menu Bar.

14.

You can close QuickBooks by selecting

“File| Exit” from the Menu Bar. for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 61

CHAPTER 20-

Payroll

20.1- The Payroll Process

20.2- Creating Payroll Items

20.3- Setting Employee Defaults

20.4- Setting Up Employee Payroll Information

20.5- Creating Payroll Schedules

20.6- Creating Scheduled Paychecks

20.7- Creating Unscheduled Paychecks

20.8- Creating Termination Paychecks

20.9- Voiding Paychecks

20.10- Tracking Your Tax Liabilities

20.11- Paying Payroll Tax Liabilities

for evaluation

20.13- Entering Liability Refund Checks

20.14- Process Payroll Forms

20.15- Tracking Workers Compensation

purposes only!

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 62

Payroll

20.1- The Payroll Process:

QuickBooks. To find out how you do this, select

“Employees| Payroll| Turn on Payroll in QuickBooks” from the Menu Bar. In the window that then appears, you can evaluate the payroll plans and purchase a payroll plan through QuickBooks to begin the setup of your initial payroll data.

After you have purchased a payroll plan you can setup basic payroll information by selecting

“Employees| Payroll Setup” from the Menu Bar. Use the “QuickBooks Payroll Setup” wizard to input the information that QuickBooks will need to know in order to begin processing payroll for your company file.

QuickBooks uses the tax tables that come with your payroll subscription to calculate employee payroll.

QuickBooks calculates each employee’s gross pay, taxes, deductions, and net pay. In QuickBooks, you can write the paycheck, record the transactions for the correct accounts, print payroll forms, and keep track of your tax liabilities.

As an employer, you must subtract taxes and other deductions before issuing an employee’s benefits such as 401 (k) plan, or contributions to your purposes social security, Medicare, and federal withholding taxes from employee paychecks, you must submit regular deposits of the withheld money and file quarterly forms that list the amounts withheld from each employee paycheck. Here is an overview of the payroll process and the steps that you must complete to do payroll.

DESCRIPTION: INFORMATION:

Enter information about your company. This includes information about your federal and state tax ID numbers.

You enter this information when you set up your QuickBooks company in the EasyStep interview. You can later view company information by selecting “Company| Company Information” from the Menu Bar.

Enter information about your employees. for

Enter information about your payroll items. your employees, and specific information related to payroll (such as the employee’s salary or hourly rate, filing status, number of exemptions, and miscellaneous additions, deductions, and company contributions). You can store payroll information that most employees have in common in employee defaults. Then, whenever you have a new employee to add, simply enter information that’s specific to that employee (name, address, etc…).

QuickBooks maintains a

“Payroll Item List” that contain items that affect the amounts on a paycheck, including company payroll expenses. When you specify you want to use payroll, QuickBooks creates most payroll items for you but you add others if needed.

Tax tables for fed, state, and local withholdings. QuickBooks uses tax tables for payroll calculations. You get the current tax tables and keep them current when you subscribe to one

Sample-

©TeachUcomp, Inc.

of the QuickBooks payroll plans. If you choose not to subscribe to one of these plans, you must calculate and enter payroll tax deductions manually for each paycheck

Advanced QuickBooks 63

Payroll

20.2- Creating Payroll Items:

in the

“Payroll Item” list. There are payroll items for compensation, taxes, other additions and deductions, and employer-paid expenses. QuickBooks uses payroll items to track individual amounts on a paycheck and accumulated year-to-date wage and tax amounts for each employee.

When you set up payroll for your company in QuickBooks, many items are added to the list for you.

However, you can also manually create others if you need them. You can view the current set of payroll items by selecting

“Lists| Payroll Item List” from the Menu Bar. You can access the commands that you need to manage the entries in this list by clicking the

“Payroll Item” button in the lower-left corner of this list.

To add a new payroll item, click the

“Payroll Item” button in the lower-left corner of the “Payroll Item

List” and then select the “New” command from the pop-up menu that appears. In the “Add new payroll item” window, answer the questions posed to you on each screen and then click the

“Next” button until you have set up the new item. Click

“Finish” when you are done to add the selected item into the “Payroll Item” list.

20.3- Setting Employee Defaults:

purposes

You can store information you want to set as the default value when you create a new employee record into your

“employee defaults” in the “Employees” list. After setting default employee values, when you later add a new employee, QuickBooks will automatically fill-in the default information from the employee defaults so that you won’t have to re-enter it. All you will need to do is enter the employeespecific information.

You can access the employee defaults within the Employee Center by selecting

“Employees|

Employee

Center” from the Menu Bar to open it. Then click the “Manage Employee Information” button in the toolbar at the top of the

“Employee Center” window and select the “Change New Employee Default

Settings” command.

In the

“Employee Defaults” window that appears, enter any information that you would like to have appear by default whenever you create a new employee record. You can also set default tax information, or evaluation

“Taxes…” or “Sick/Vacation…” buttons to

“Taxes Defaults” and “Sick and Vacation Defaults” dialog boxes. When you have finished setting all of your employee defaults, click the

“OK” button to save them.

You can enter employee payroll information when you add new employees to the

“Employees” list within the

“New Employee” window. You can also edit the employee’s payroll data by using the “Edit

Employee” window, if the payroll info changes. In either the “New Employee” or “Edit Employee” windows, you can enter or edit payroll information by selecting the

“Payroll Info” tab at the left side of either window.

On the

“Payroll Info” tab, select the payroll schedule for the employee from the “Payroll Schedule” drop-down menu. Then enter the type of pay the employee receives by selecting a compensation

“Payroll

Item” from the “Item Name” column within the “Earnings” section. To the right of that selected item, you can then enter the amount of compensation into the

“Hourly/Annual Rate” column. Then enter any additions,

Sample-

“Additions, Deductions & Company Contributions” section by

“Payroll Item” from the “Item Name” column. Then enter the “Amount” for

“Limit” for each, if needed. If the employee uses time data entered

Advanced QuickBooks 64 ©TeachUcomp, Inc.

Payroll

20.4- Setting Up Employee Payroll Information-

(cont’d.):

into the worked, then select the only!

employee is covered by a qualifying pension plan, check the

“Employee is covered by a qualifying pension plan” checkbox.

You can then set the employee’s payroll tax data by clicking the “Taxes…” button to open the

“Taxes” dialog box. Here you enter the employee’s payroll tax withholding information into the “Federal,”

“State,” and “Other” tabs. Note that the “Other” tab is used for any special state or local payroll tax information required. Once you have entered their payroll tax information, click the

“OK” button within the

“Taxes” dialog box to return to the “New Employee” or “Edit Employee” window.

You can enter the employee’s sick and vacation time by clicking the “Sick/Vacation…” button within the

“Payroll Info” tab to open the “Sick and Vacation” dialog box. In the “Sick” and “Vacation” sections, you can use the

“Accrual Period” drop-down to select how the employee accrues sick and vacation time. You purposes

“Sick and Vacation” dialog box to return to the “New Employee” or “Edit Employee” window.

When you are finished setting up the employee’s payroll data, click the “OK” button within either the

“New Employee” or “Edit Employee” windows to close the window and save your changes. for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 65

Payroll

20.5- Creating Payroll Schedules:

feature. However, if needed, you can also print unscheduled employee paychecks as well as termination paychecks.

Before you start a scheduled payroll, however, you must first create at least one payroll schedule.

You can create and modify payroll schedules by selecting

“Employees| Add or Edit Payroll Schedules” from the Menu Bar to open the

“Payroll Schedule List.” To create a new payroll schedule, click the “Payroll

Schedule” button and then choose the “New” command.

In the

“New Payroll Schedule” window that appears, enter a name for the payroll schedule into the

“What do you want to name this payroll schedule?” field. Use the next field’s drop-down to select the frequency with which this payroll will recur. After that, use the

“What is the pay period end date?” calendar selector to select the final date in the pay period. Then use the

“What date should appear on paychecks for this pay period?” calendar selector to select the paycheck date for the payroll. If you chose to create a purposes schedule.

20.6- Creating Scheduled Paychecks:

You can create and print employee paychecks for a scheduled payroll by either selecting

“Employees| Pay Employees| Scheduled Payroll” from the Menu Bar or by clicking the “Pay Employees” button in the Home page to open the

“Employee Center: Payroll Center” window.

“Pay Employees” section of the window, select the name of the payroll schedule to pay from the listing shown. Then click the

“Start Scheduled Payroll…” button to open the “Enter Payroll Information” window where you will see the employees assigned to the selected payroll schedule. All employees that you want to pay on this schedule should appear here with a checkmark next to their names. You then need evaluation paycheck within a

“Preview Paycheck” window where you can edit the information and then click the “Save

& continue paying the employees. for

“Review and Create Paychecks” window. In the

“Paycheck Options” section, you can select the option button for “Print paychecks from QuickBooks” to create the paychecks and print them. If you are recording paychecks that have already been created, you can select the

“Assign check numbers to handwritten checks” option button and then enter the first check number into the

“First Check Number” field. You can then click the “Create Paychecks” button to create the selected paychecks for the scheduled payroll. You can then use the

“Confirmation and Next Steps” window that appears to finish the payroll. Within this window you can click the

“Print Paychecks” button to print the paychecks that you just created if you chose to print paychecks in QuickBooks. You can click the

“Print Pay

Stubs

” button to print paystubs for the checks, if needed. When you are done, click the “Close” button.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 66

Payroll

20.7- Creating Unscheduled Paychecks:

select

“Employees| Pay Employees| Unscheduled Payroll” from the Menu Bar to open the “Enter Payroll

Information” window. Here you manually set the “Pay Period Ends” and “Check Date.” Then select the account from which the funds will be withdrawn from the

“Bank Account:” drop-down. You then place a checkmark next to the names of the employees to pay. When you are ready, click the

“Continue” button to continue creating the paychecks. In the next screen, select whether the check should be printed, or assigned a check number in the

“Paycheck Options” section. You can then click on the hyperlinked name of the employee shown within the list to open the

“Preview Paycheck” window where you can review and edit the payroll information, if needed. After entering or editing the paycheck details, click the

“Save & Close” button. Once you are ready to create the paychecks, click the

“Create Paychecks” button. If you are printing the paychecks within QuickBooks, you can then click either the

“Print Paychecks” or “Print Pay Stubs” button, as needed, and then click the

“Close” button to finish.

20.8- Creating Termination Paychecks:

purposes

You can also create termination paychecks when an employee leaves. You can select

“Employees|

Pay Employees| Termination

Check” from the Menu Bar to open the “Enter Payroll Information” window.

Here you manually set the

“Pay Period Ends” and “Check Date.” Then select the account from which the funds will be withdrawn from the

“Bank Account:” drop-down. You then place a checkmark next to the names of the employees who need a termination check. To the right of their names, under the

“Release

Date” column, enter the employee’s release date. This information will be updated within their employee record when you create the paychecks. When you are ready, click the

“Continue” button to continue creating the paychecks. In the next screen, select whether the check should be printed, or assigned a check number in the

“Paycheck Options” section. You can then click on the hyperlinked name of the employee shown within the list to open the

“Preview Paycheck” window where you can review and edit the payroll information, if needed. After entering or editing the paycheck details, click the

“Save & Close” button. Once as needed, and then click the evaluation for

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 67

Payroll

20.9- Voiding Paychecks:

you want to void within the

“Write Checks” window or by using the appropriate checking account register.

With the desired paycheck to void displayed, select

“Edit| Void Paycheck” from the Menu Bar.

20.10- Tracking Your Tax Liabilities:

As the employer, you need to track both the payroll expenses and payroll liabilities. The payroll expenses you need to track are the employee’s gross pay and the employer’s payroll taxes. QuickBooks uses an account called

“Payroll Expenses” to track the actual costs to your company. Whatever funds you deduct from employee paychecks aren’t shown here. Those funds are placed into an account called

“Payroll Liabilities.” That makes it easy to see what payroll taxes you owe, so that you can have the necessary cash available for payment. purposes you owe as of a given date.

When you are ready to pay your payroll liabilities, you may want to see the amount you will be paying. You can run a

“Payroll Liabilities” report to see how much you owe in payroll liabilities. You can access this report by selecting

“Reports| Employees & Payroll| Payroll Liability Balances” from the Menu

Bar. for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 68

Payroll

20.11- Paying Payroll Tax Liabilities:

Once you are ready to write a check for the payroll liabilities, you must write a only!

will not properly adjust the Payroll Liabilities account! When you write a check (or enter a General

Journal entry) against the

“Payroll Liabilities” account without specifying which liabilities are adjusted, it will take the total amount of the adjustment and disburse it amongst the individual liabilities. This will then cause the balance of each individual liability to be incorrect! While you can fix it by making liability adjustments to the individual liabilities, it is tedious to fix and best avoided.

When you subscribe to one of the QuickBooks payroll tax services, you set up scheduled liability payments as part of the Payroll Setup process. You can view this information within the Payroll Center in

QuickBooks. To pay your scheduled payroll liabilities, just select

“Employees| Payroll Taxes and Liabilities|

Pay Scheduled

Liabilities” from the Menu Bar. You can then check the scheduled payments to make from the listing shown in the

“Pay Scheduled Liabilities” section of the “Employee Center: Payroll Center” window. You can then click the save the checks for printing. purposes

If needed, you can select

“Employees| Payroll Taxes and Liabilities| Create Custom Liability

Payments” to create a custom liability payment for your payroll liabilities. In the window that appears, you select the date range of the liabilities to pay. Then click the

“OK” button to view the “Pay Liabilities” window.

In the

“Pay Liabilities” window, place a checkmark next to the individual payroll liabilities that you want to pay with the custom liability payment. If you want to create checks for printing, ensure that the

“To be printed” checkbox is selected. Next, make sure that the option button for “Review liability check to enter expenses/penalties” is selected and then click the “Create” button to create the “Liability Checks.” Note that this type of check has a special tab at the bottom that indicates exactly which liabilities are being paid with that check. If you have additional penalties to add, you can to that on the

“Expenses” tab. If you do make modifications to the check, save and close the check when finished to save changes that you have made.

20.12- Adjusting Payroll Liabilities:

service, meaning the federal and state tax liabilities. However, you can adjust the liability balance for local for

QuickBooks shows in the payroll reports.

To adjust the liability balance, select

“Employees| Payroll Taxes and Liabilities| Adjust Payroll

Liabilities” from the Menu Bar to open the “Liability Adjustment” window.

Next, in the

“Date” field, enter the date for which you are making the adjustment. In the “Effective

Date” field, enter the date that you want this adjustment to affect your liability balances. QuickBooks uses this date to calculate amounts on your Forms 940 and 941 and on the payroll liability balances report.

Then choose whether this liability adjustment is for the company or a specific employee. In the

“Item

Name” field, choose the payroll liability to adjust and in the “Amount” field, enter the amount of the adjustment. You can either enter a positive number or a negative number, as is appropriate. Click

“OK”

Sample-

©TeachUcomp, Inc.

“Effective Date” that you entered.

Advanced QuickBooks 69

Payroll

20.13- Entering Liability Refund Checks:

then need to record in QuickBooks to correct your liability balance. To do this, select

“Employees| Payroll

Taxes and Liabilities| Deposit Refund of

Liabilities” from the Menu Bar.

QuickBooks will open the

“Refund Deposit for Taxes and Liabilities” window. In this window, from the

“Vendor” drop-down list, choose the vendor from whom you received the refund check. Then in the

“Refund Date” field, enter the date that you want this refund check to enter your bank account. In the “For

Period

Beginning” field, enter the beginning date of the pay period that this refund affects.

Next, indicate whether you want QuickBooks to group this payment with other undeposited funds or deposit it directly into a bank account. In the

“Item Name” column, choose the payroll liability to adjust. In the

“Amount” field, enter the amount of the refund as a positive amount. If the refund is for more than one payroll item, enter the additional payroll items and their amounts. Just click

“OK” when you are finished. If you overpay your payroll liabilities, your liability balance is then negative. After you record the refund check, purposes

20.14- Process Payroll Forms:

You can print out your annual and quarterly federal payroll forms by selecting

“Employees| Payroll

Tax Forms & W-2

’s| Process Payroll Forms” from the Menu Bar.

At that point, you can then select the

“Federal forms” option from the “Select Form Type” dialog box.

Then click

“OK” to continue. In the “Select Payroll Form” dialog box, select which document you would like to create from the list shown and then ensure that you have the correct filing period selected in the

“Select filing period” section. Then click the “OK” button to continue.

Depending upon which form you selected, a specific wizard that will then launch to pose questions and show you information QuickBooks has collected, just like the Easy Step Interview does. Use the wizards to enter or verify information that QuickBooks has collected and answer all of the questions on each screen until you are finished creating the forms. for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 70

Payroll

20.15- Tracking Workers Compensation:

you can take advantage of the workers compensation tracking feature to manage tracking workers compensation hours and make the required payments. You must, however, set up the workers compensation feature before you run a payroll. If you do not, the information may be inaccurate or incomplete. Also, this feature must be enabled at the beginning of the insurance policy coverage year in order to completely track the information in QuickBooks. There is no way to enter

“year-to-date” data if starting in the middle of the insurance coverage year. In that case, you must combine the data in

QuickBooks with any information you have manually tracked in order to get the correct totals for the year.

When you first sign up for the QuickBooks enhanced payroll, the workers compensation feature is not enabled. You can turn it on by selecting

“Edit| Preferences…” from the Menu Bar. This will launch the

“Preferences” dialog box, where you can select the “Payroll & Employees” icon from the scroll box at the left side. Then click the

“Company Preferences” tab. Then click the “Workers Compensation” button. You can place a checkmark into the hours into the purposes premium from Workers Comp calculation” checkbox if your workers compensation insurance company directs you to treat all overtime hours as if they were paid at the regular wage rate. Once you have set the desired option, click

“OK” to return to the “Preferences” dialog box, where you must click “OK” once again to set the preferences.

Now you must continue to set up workers compensation tracking by using the Workers

Compensation Setup wizard. To open this wizard, select

“Employees| Workers Compensation| Set Up

Workers

Comp” from the Menu Bar. The first screen will display information which you will need in order to complete the wizard, and you can gather that information from your insurance company, if necessary. Then enter the information into the screens and click

“Next” to move through the wizard.

After you have set up the employees and what codes they are assigned by default, you can then issue paychecks as normal and the workers compensation will be accrued as you issue paychecks. Note that if you assign a default workers compensation code to an employee, that code will be used by default evaluation

“Preview Paycheck” window as you review the employee paychecks.

When it comes time to actually pay the workers compensation premiums, you can first run a workers for

“Reports| Employees & Payroll| Workers Comp Detail” from the Menu

Bar. You can verify the amount to pay and where it came from using this report. Since workers compensation is tracked as a payroll liability, you can pay the premium using the

“Pay Liabilities” window to create the liability check.

You can also create and modify the codes used for workers compensation classification in the

“Workers Comp List.” You can open this list by selecting “Lists| Workers Comp List” from the Menu Bar when you have workers compensation tracking enabled. You can set up new codes and enter and edit experience modification factors used for calculations, if needed.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 71

ACTIONS-

Payroll

EXPLORING PAYROLL OPTIONS:

Select “Employees| Payroll| Turn on Payroll in QuickBooks” from the Menu Bar.

TO SET UP PAYROLL:

Select “Employees| Payroll Setup” from the Menu Bar.

2. In the wizard that appears, answer the questions posed to you and provide the required information within each screen.

VIEWING AND CREATING PAYROLL ITEMS:

1. To view the current set of payroll items, select

2. To add a new payroll item

purposes

3. In the “Add new payroll item” window, answer the questions posed to you on each screen and then click the “Next” button until you have set up the new item.

4. Click

“Finish” when you are done to add the selected item into the “Payroll Item” list.

SETTING EMPLOYEE DEFAULTS:

1. Select

“Employees| Employee Center” from the Menu Bar.

2. Click the “Manage Employee Information” button in the toolbar at the top of the “Employee Center” window and select the “Change New Employee Default Settings” command.

3. In the “Employee Defaults” window that appears, enter any information that you would like to have evaluation

“Taxes Defaults” and “Sick and Vacation Defaults” dialog boxes.

5. When you have finished setting all of your employee defaults, click the “OK” button to save them. for

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 72

ACTIONS-

Payroll

ENTERING EMPLOYEE PAYROLL INFO:

Within the “Employees” list in the “Employee Center,” open either the “New Employee” or “Edit

Employee” window. only!

2. In either the “New Employee” or “Edit Employee” windows, you can enter or edit payroll information by selecting the “Payroll Info” tab at the left side of either window.

On the “Payroll Info” tab, select the payroll schedule for the employee from the “Payroll Schedule” dropdown menu.

4. Enter the type of pay the employee receives by selecting a compensation “Payroll Item” from the “Item

Name” column within the “Earnings” section.

5. To the right of that selected item, you can then enter the amount of compensation into the

“Hourly/Annual Rate” column.

6. Enter any additions, deductions or company contributions in the “Additions, Deductions & Company

Contributions” section by selecting the name of the desired “Payroll Item” from the “Item Name” column.

7. Then

8. If purposes checkbox at the bottom of the tab.

9. If the employee is covered by a qualifying pension plan, check the “Employee is covered by a qualifying pension plan” checkbox.

10. You can then set the employee’s payroll tax data by clicking the “Taxes…” button to open the “Taxes” dialog box.

11. Here you enter the employee’s payroll tax withholding information into the “Federal,” “State,” and “Other” tabs. Note that the “Other” tab is used for any special state or local payroll tax information required.

12. Once you have entered their payroll tax information, click the “OK” button within the “Taxes” dialog box to return to the “New Employee” or “Edit Employee” window.

13. You can enter the employee’s sick and vacation time by clicking the “Sick/Vacation…” button within the

“Payroll Info” tab to open the “Sick and Vacation” dialog box.

14. In the “Sick” and “Vacation” sections, you can use the “Accrual Period” drop-down to select how the evaluation if and when the number of hours are to be reset by entering the desired values into the fields available.

16. When you have finished entering the sick and vacation information for the employee, click the “OK” window.

17. When for

“New Employee” or “Edit Employee” windows to close the window and save your changes.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 73

ACTIONS-

Payroll

CREATING A PAYROLL SCHEDULE:

1. Select

List

.” only!

2. To create a new payroll schedule, click the “Payroll Schedule” button and then choose the “New” command.

3. In the “New Payroll Schedule” window that appears, enter a name for the payroll schedule into the

“What do you want to name this payroll schedule?” field.

4. Use the next field’s drop-down to select the frequency with which this payroll will recur.

5. Use the “What is the pay period end date?” calendar selector to select the final date in the pay period.

6. Use the “What date should appear on paychecks for this pay period?” calendar selector to select the paycheck date for the payroll.

7. If you chose to create a semimonthly or monthly payroll, you may also need to answer a few more daterelated questions in this screen.

8. Once selected payroll schedule. purposes

CREATING SCHEDULED PAYROLL PAYCHECKS:

1. Select

“Employees| Pay Employees| Scheduled Payroll” from the Menu Bar or click the “Pay

Employees” button in the Home page to open the “Employee Center: Payroll Center” window.

2. In

“Pay Employees” section, select the name of the payroll schedule to pay from the listing shown.

3. Then click the “Start Scheduled Payroll…” button to open the “Enter Payroll Information” window where you will see the employees assigned to the selected payroll schedule.

4. All employees that you want to pay on this schedule should appear here with a checkmark next to their names.

5. Ensure that the data shown in the “Payroll Information” section is correct. evaluation

8. Edit the information and then click the “Save & Close” button to finish.

9. After

10. Review

11. In for create the paychecks and print them.

12. If you are recording paychecks that have already been created, you can select the “Assign check numbers to handwritten checks” option button and then enter the first check number into the “First

Check Number” field.

13. Click the “Create Paychecks” button to create the selected paychecks for the scheduled payroll.

14. Within the

“Confirmation and Next Steps” window that appears, you can click the “Print Paychecks” button to print the paychecks that you just created if you chose to print paychecks in QuickBooks.

15. You can click the “Print Pay Stubs” button to print paystubs for the checks, if needed.

16. When you are done, click the “Close” button. Sample-

©TeachUcomp, Inc. Advanced QuickBooks 74

ACTIONS-

Payroll

CREATING UNSCHEDULED PAYCHECKS:

1. Select

Information” window. only!

2. Enter the “Pay Period Ends” and “Check Date” field values.

3. Select the account from which the funds will be withdrawn from the “Bank Account:” drop-down.

4. Place a checkmark next to the names of the employees to pay.

5. Click the “Continue” button to continue creating the paychecks.

6. In the next screen, select whether the check should be printed, or assigned a check number in the

“Paycheck Options” section.

7. Click on the hyperlinked name of any employee shown within the list to open the “Preview Paycheck” window where you can review and edit the payroll information, if needed.

8. After entering or editing the paycheck details, click the “Save & Close” button.

9. Once you are ready to create the paychecks, click the “Create Paychecks” button.

10. If

“Print Pay Stubs” button, as needed.

11. Click the “Close” button to finish. purposes

CREATING TERMINATION PAYCHECKS:

1. Select

“Employees| Pay Employees| Termination Check” from the Menu Bar to open the “Enter Payroll

Information” window.

Enter the “Pay Period Ends” and “Check Date” field values.

3. Select the account from which the funds will be withdrawn from the “Bank Account:” drop-down.

4. Place a checkmark next to the names of the employees who need a termination check.

5. To the right of their names, under the “Release Date” column, enter the employee’s release date. This

information will be updated within their employee record when you create the paychecks.

6. When you are ready, click the “Continue” button to continue creating the paychecks.

“Paycheck Options” section. evaluation

10.

11.

window where you can review and edit the payroll information, if needed. for

“Print Pay Stubs” button, as needed.

12.

Click the “Close” button to finish.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 75

ACTIONS-

Payroll

VOIDING PAYCHECKS:

1. Display the paycheck that you want to void within the “Write Checks” window or by using the appropriate checking account register.

2. With the desired paycheck to void displayed, select “Edit| Void Paycheck” from the Menu Bar. only!

TRACKING PAYROLL TAX LIABILITIES:

1. You can doubleclick either the “Payroll Liabilities” or “Payroll Expenses” accounts within the “Chart of

Accounts” window to view either the account register or a QuickReport showing the account balances.

2. You can run a “Payroll Liabilities” report by selecting “Reports| Employees & Payroll| Payroll Liability

Balances” from the Menu Bar.

PAYING PAYROLL TAX LIABILITIES:

1. To pay scheduled payroll liabilities, select

purposes

Liabilities” from the Menu Bar.

2. Check the scheduled payments to make from the listing shown in the “Pay Scheduled Liabilities” section of the “Employee Center: Payroll Center” window.

3. Click the “View/Pay” button to open the “Liability Check” window where you can review the liability check or checks to be created.

4. Click the “Save & Close” button to finish and save the checks for printing.

5. To create a custom payroll liabilities payment, select

“Employees| Payroll Taxes and Liabilities|

Create Custom Liability Payments” from the Menu Bar.

6. In the window that appears, select the date range of the liabilities to pay.

7. Click the “OK” button to view the “Pay Liabilities” window.

8. In the “Pay Liabilities” window, place a checkmark next to the individual payroll liabilities to pay with the custom liability payment.

9. If

10. Make evaluation then click the “Create” button to create the “Liability Checks.” being paid with that check.

12. If for

13. If you do make modifications to the check, click the “Save & Close” button when you are finished to save changes that you have made.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 76

ACTIONS-

Payroll

ADJUSTING A PAYROLL LIABILITY:

1. To from the Menu Bar to open the “Liability Adjustment” window. only!

2. In the “Date” field, enter the date for which you are making the adjustment.

3. In the “Effective Date” field, enter the date that you want this adjustment to affect your liability balances.

4. Choose whether this liability adjustment is for the company or a specific employee.

5. In the “Item Name” field, choose the payroll liability to adjust and in the “Amount” field, enter the amount of the adjustment. You can either enter a positive number or a negative number, as is appropriate.

6. Click

“OK” when you are done to enter the adjustment.

ENTERING A PAYROLL LIABILITY REFUND CHECK:

1. Select

“Employees| Payroll Taxes and Liabilities| Deposit Refund of Liabilities” from the Menu Bar.

2. In the “Refund Deposit for Taxes and Liabilities” window, choose the vendor from whom you received the refund check from the “Vendor” drop-down list.

3. In purposes

4. In the “For Period Beginning” field, enter the beginning date of the pay period that this refund affects.

5. Indicate whether you want QuickBooks to group this payment with other undeposited funds or deposit it directly into a bank account.

6. In the “Item Name” column, choose the payroll liability to adjust.

7. In the “Amount” field, enter the amount of the refund as a positive amount.

8. If the refund is for more than one payroll item, enter the additional payroll items and their amounts.

9. Click

“OK” when you are finished.

PROCESSING FEDERAL PAYROLL FORMS:

Forms & W-

2. Select evaluation

3. Click

“OK” to continue.

4. In shown and ensure

5. Click for

6. Depending upon which form you selected, a specific wizard that will then launch to pose questions and show you information QuickBooks has collected. Use it to enter or verify information that QuickBooks has collected and answer all of the questions on each screen until you are finished creating the forms.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 77

ACTIONS-

Payroll

TRACKING WORKERS COMPENSATION:

1. If you subscribe to the QuickBooks Enhanced Payroll service, you can turn on the workers compensation feature by selecting “Edit| Preferences…” from the Menu Bar. only!

2. In the “Preferences” dialog box, select the “Payroll & Employees” icon from the scroll box at the left side.

3. Click the “Company Preferences” tab.

4. Click the “Workers Compensation” button.

5. Place a checkmark into the “Track Workers Comp” checkbox to enable the feature.

6. You can also check the “Display message to assign codes” checkbox to enable a classification prompt when entering employee hours into the “Pay Employees” or time tracking windows.

7. You can also check the “Exclude overtime premium from Workers Comp calculation” checkbox if your workers compensation insurance company directs you to treat all overtime hours as if they were paid at the regular wage rate.

8. Once you have set the desired options, click “OK” to return to the “Preferences” dialog box.

9. Click

“OK” once again to set the preferences. purposes from the Menu Bar.

11. The first screen will display information which you will need in order to complete the wizard, and you can gather that information from your insurance company, if necessary.

12. Then enter the information into the screens and click “Next” to move through the wizard.

13. After you have set up the employees and what codes they are assigned by default, you can then issue paychecks as normal and the workers compensation will be accrued as you issue paychecks.

14. Note that if you assign a default workers compensation code to an employee, that code will be used by default when issuing paychecks or entering hours in a timesheet. You can also change the code used for any earning line item in these windows, if needed.

15. You can view the workers compensation information in the “Preview Paycheck” window as you review the employee paychecks.

16. When it comes time to actually pay the workers compensation premiums, you can first run a workers

17. Since workers compensation is tracked as a payroll liability, you pay

18. You for evaluation

Liabilities” window to create the liability check. the premium using the “Pay

19. You can set up new codes and enter and edit experience modification factors used for calculations, if needed.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 78

EXERCISES-

Payroll

Purpose:

To be able to pay scheduled employees in QuickBooks. only!

Exercises:

Open QuickBooks.

Select

“File| Close Company” from the Menu Bar if you have a company file open to get to the “No

Company

Open” dialog box.

Click the

“Open a sample file” button, and select “Sample product-based business” from the drop-

down of choices.

Click

“OK” on the sample file message box.

Select

“File| Back Up Company| Create Local Backup” from the Menu Bar.

Use the

“Create Backup” window to make a local backup of this company file, so that you may

After backing up the file, select

Click the purposes

To accept the default scheduled payroll, simply click the

“Continue” button.

10.

Ensure that the

“Print paychecks from QuickBooks” option button is selected in the “Paycheck

Options” section.

11.

Click the

“Create Paychecks” button in the lower right corner of the screen.

12.

Click the

“Close” button at the bottom of the “Confirmation and Next Steps” window.

13.

In the

“Pay Scheduled Liabilities” section of the Payroll Center note the upcoming payroll liabilities for the company file.

14.

You can close the company file by selecting

“File| Close Company” from the Menu Bar.

15.

You can close QuickBooks by selecting

“File| Exit” from the Menu Bar. for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 79

CHAPTER 21-

Using Credit Card Accounts

21.1- Creating Credit Card Accounts

21.2- Entering Charges on Credit Cards

21.3- Reconciling and Paying Credit Cards

only!

purposes for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 80

Using Credit Card Accounts

21.1- Creating Credit Card Accounts:

you use in your business. Like any QuickBooks account, a credit card account has its own register. The register lists all the charges and credits you’ve recorded, as well a payments you’ve made.

To create a credit card account, open the

“Chart of Accounts” window by selecting “Lists| Chart of

Accounts” from the Menu Bar. Then click the “Account” button in the lower left corner of the “Chart of

Accounts” window and select the “New” command from the pop-up menu.

In the

“Add New Account: Choose Account Type” window, select the “Credit Card” option button and then click the

“Continue” button to open the “Add New Account” window. Enter the name for the account into the

“Account Name” field. You can assign an account number by entering one into the “Number” field if account numbering is enabled within your QuickBooks company file. You can then enter the account’s

“Description” and “Credit Card Acct. No.” into the fields within the “Optional” section, if desired. Once you have added any information you want to record, click the

“Save & Close” button to create the account.

21.2- Entering Charges on Credit Cards:

purposes

QuickBooks allows you to choose when you enter your credit card charges. You can enter credit card charges incrementally as you make charges to the credit card, or you can enter all credit card charges in lump amounts by account once you receive the credit card bill. Your choice depends on whether you enjoy entering information incrementally or all at once. Also, one advantage to entering the charges incrementally as you charge items is that you can keep close track of how much you owe. Another advantage is that if the charge is made for a particular customer:job, you can keep track of how much you are spending on that job. Another advantage to recording charges as they are incurred is that you can then reconcile the charges you entered against the credit card bill when it arrives, allowing you to spot errors and non-authorized charges more easily.

To enter credit card charges incrementally as they are incurred, select

“Banking| Enter Credit Card

Charges” from the Menu Bar to display the “Enter Credit Card Charges” window. Within this window, select evaluation

“Refund/Credit” option button, if needed.

Next, use the number into the for

“Date” field. You can enter the credit card transaction can enter a note about the charge into the

“Memo” field.

At the bottom of this window, just as in the

“Write Checks” window, you will then attribute the amount charges to the desired expense account or accounts by selecting an account from the

“Account” column on the

“Expenses” tab. The total amount will then appear in the adjacent “Amount” column. If the charge is for a job, you can select the name of the job form the

“Customer:Job” column, and set its billing status within the

“Billable?” column. If you need to split the charge amount between multiple expense accounts, change the

“Amount” value shown, and then repeat the process in the next row until you have accounted for the entire charge amount.

Also note that if you use this window for purchasing

“Inventory Part” items, or buying “Services” from

Sample-

©TeachUcomp, Inc.

“Items” tab at the bottom of the window and then enter the items purchased with

Advanced QuickBooks

“Amount” column at the top of the form.

Using Credit Card Accounts

21.2- Entering Charges on Credit Cards-

(cont’d.):

then constitute the total amount of the charge entered into the

“Amount” field above.

Once you have entered the credit card charge information, you can click the

“Save & Close” button to save the transaction and close the window. After you have input the charge, QuickBooks adds the charge amount to the credit card account’s register, increasing the total account liability by the charge amount. It will add the same amount to the appropriate expense account once the bill for the credit card is entered or paid.

21.3- Reconciling and Paying Credit Cards:

If you enter credit card charges incrementally, you can reconcile the entries that have been made against the bill when it arrives. This can be helpful in preventing unauthorized charges on the card. you want to reconcile to select it. From there, you will click the purposes the chart of accounts and select

“Reconcile Credit Card” from the pop-up menu that appears.

That will display the

“Begin Reconciliation” dialog box. Here you will input the statement date from your credit card statement, the ending balance from your statement, any finance charges you accrued, the date, and the account that you use to track those charges. Then click

“Continue” at the bottom of the “Begin

Reconciliation” dialog box to display the “Reconcile Credit Card” window for the selected account.

In this window, you will see all of the transactions that haven’t cleared. You’ll use this window to check off the transactions listed on your credit card statement. Click on each transaction to place a check mark in front of each transaction that matches your credit card statement to mark it as cleared. When you are done the

“Difference” (in the lower right corner), should be zero. Click “Reconcile Now” to reconcile the account, and to select the options for the report that you’d like to have generated.

Once you’ve reconciled your credit card account, QuickBooks gives you a chance to pay all or part evaluation name of the company to whom you pay the balance and then print the check or save the bill. for

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 82

ACTIONS-

Using Credit Card Accounts

CREATING A CREDIT CARD ACCOUNT:

1. Open

2. Click only!

“New” command from the pop-up menu.

3. In the “Add New Account: Choose Account Type” window, select the “Credit Card” option button and then click the “Continue” button to open the “Add New Account” window.

4. Enter the name for the account into the “Account Name” field.

5. You can assign an account number by entering one into the “Number” field if account numbering is enabled within your QuickBooks company file.

6. You can then enter the account’s “Description” and “Credit Card Acct. No.” into the fields within the

“Optional” section, if desired.

7. Once you have added any information you want to record, click the “Save & Close” button to create the account.

ENTERING CREDIT CARD CHARGES: purposes

1. Select

“Banking| Enter Credit Card Charges” from the Menu Bar to display the “Enter Credit Card

Charges” window.

2. Select the credit card account that was used for the charge from the “Credit Card” drop-down menu at the top of the window.

3. To the right of that dropdown, ensure that the “Purchase/Charge” option button is selected. Note that you can also record refunds and credits to a credit card account by selecting the “Refund/Credit” option button, if needed.

4. Use the “Purchased From” drop-down to select the name of the vendor with whom you made the purchase.

5. Enter the date of the charge into the “Date” field.

6. Enter the credit card transaction number into the “Ref. No.” field.

7. Enter

8. If evaluation by selecting an account from the “Account” column on the “Expenses” tab. The total amount will then

10. If for

11. If you need to split the charge amount between multiple expense accounts, change the “Amount” value shown, and then repeat the process in the next row until you have accounted for the entire charge amount.

12. If you use this window for purchasing “Inventory Part” items, or buying “Services” from subcontractors, then you will not enter the charge amount within the “Amount” column at the top of the form. Instead, you will click the “Items” tab at the bottom of the window and then enter the items purchased with the credit card charge, including their quantities and amounts. The sum value of the items purchased will then constitute the total amount of the charge entered into the “Amount” field above.

13. Once you have entered the credit card charge information, you can click the “Save & Close” button to Sample-

©TeachUcomp, Inc. Advanced QuickBooks 83

ACTIONS-

Using Credit Card Accounts

RECONCILING A CREDIT CARD ACCOUNT:

only!

received by choosing it from the “Account” drop-down.

Enter the statement date of the credit card bill into the “Statement Date” field.

4. Enter the ending balance due from your credit card bill into the “Ending Balance” field.

5. If there are any finance charges for the credit card, enter the amount and date of the charges into the

“Finance Charge” and “Date” fields. Then use the adjacent “Account” drop-down to select the expense account used to track finance charge amounts.

Click the “Continue” button to continue to the “Reconcile Credit Card” window.

7. Compare the transactions listed within the credit card bill to the uncleared transactions shown within the

“Charges and Cash Advances” section and the Payments and Credits” section. For each transaction listed within these sections that is also found within the credit card bill, click into the leftmost left of each transaction you select. purposes

“Difference” shown in the lower right corner should be zero when you have finished marking all of the cleared transactions. If any amount is shown, try to find the error. Perhaps a charge was not entered that should have been, or possibly there are unauthorized charges within the credit card bill. Find and correct any errors until the “Difference” shown is zero.

9. Click the “Reconcile Now” button to display the “Select Reconciliation Report” dialog box.

10.

Make sure that the “Detail” button is selected, and the click the Display” button to view the report.

11.

Click “OK” at the message that QuickBooks displays.

12. After you have finished reconciling your credit card account, QuickBooks asks if you would like to enter a bill or write a check for the balance due. Select the option button for the choice that you prefer: “Write a check for payment now” or “Enter a bill for payment later.”

13. C lick the “OK” button after making your selection.

14.

Select the name of the company to pay for the credit card amount from the “Pay to the Order of” field in

15.

evaluation for

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 84

EXERCISES-

Using Credit Card Accounts

Purpose:

To be able to enter credit card charges. only!

Exercises:

Open QuickBooks.

Select

“File| Close Company” from the Menu Bar if you have a company file open to get to the “No

Company

Open” dialog box.

Click the

“Open a sample file” button, and select “Sample product-based business” from the drop-

down of choices.

Click

“OK” on the sample file message box.

Select

“File| Back Up Company| Create Local Backup” from the Menu Bar.

Use the

“Create Backup” window to make a local backup of this company file, so that you may

After backing up the file, select

Within the purposes window to select the

“CalOil Credit Card.”

In the

“Purchased From” field, enter “Bayshore CalOil Service.”

10.

In the

“Amount” field, type “54.”

11.

In the

“Expenses” tab, ensure the account pre-fill of “60100 - Automobile:60110 - Fuel” is shown.

12.

Click the

“Save & Close” button to save the charge.

13.

Select

“Banking| Reconcile…” from the Menu Bar.

14.

In the

“Begin Reconciliation” screen, select “20600 - CalOil Card” from the “Account” drop-down.

15.

For the

“Statement Date,” type “01/14/18.”

16.

For the

“Ending Balance” type “436.62.”

17.

Click the

“Continue” button to continue and open the “Reconcile Credit Card” window

18.

Click the

“Mark All” button to mark all transactions as being cleared. The “Difference” amount shown

19.

Click the

“Reconcile Now” button.

20.

Select the evaluation

21.

Click the

“OK” button to continue.

22.

23.

In the

“Display” button.

Click the for

24.

Click the

“X” in the upper right corner of the “Reconciliation Detail” report to close it.

25.

In the

“Write Checks” window, use the “Pay to the Order of” drop-down field to select the “CalOil

Company.

”

26.

Click the

“Save & Close” button within the “Write Checks” window.

27.

You can close the company file by selecting

“File| Close Company” from the Menu Bar.

28.

You can close QuickBooks by selecting

“File| Exit” from the Menu Bar.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 85

CHAPTER 22-

Assets and Liabilities

22.1- Assets and Liabilities

22.2- Creating and Using Other Current Asset Accounts

22.5- Creating Liability Accounts

22.6- Setting the Original Cost of the Fixed Asset

22.7- Tracking Depreciation

22.8- The Loan Manager

22.9- The Fixed Asset Item List

only!

22.3- Removing Value from Other Current Asset Accounts

22.4- Creating Fixed Asset Accounts

purposes for evaluation

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 86

Assets and Liabilities

22.1- Assets and Liabilities:

The Other Current Asset account tracks assets that are likely to be converted into cash, or used up, within one year. Examples of

“Other Current Asset” accounts include prepaid expenses and short-term notes receivable. A Fixed Asset account tracks assets your business owns that are NOT likely to be converted into cash or used up within a year.

“Fixed Asset” accounts track the value of long-lived assets with a larger value that assist you in performing your business. The value of these items are expensed over the

“useful life” of the asset, which will vary. Example include furniture, some office equipment, computers, and vehicles.

QuickBooks also has two account types that track long-term and short-term liabilities. The Other

Current Liability account tracks liabilities that your company expects to pay within a year. An example

would be a short-term loan. A Long-Term Liability account tracks debt that your business is not likely to pay off within a year. For example, when making a major purchase for your company, such as when purchase equipment is an example of a long-term liability. purposes within the

“Chart of Accounts” window, which you can access by selecting “Lists| Chart of Accounts” from the Menu Bar. Then click the

“Account” button in the lower left corner of the window and choose the “New” command from the pop-up menu to open the

“New Account: Choose Account Type” window.

In this window, you can then select the option button for the type of account to create. Note that for many asset and liability accounts, you may need to select the

“Other Account Types” drop-down button and then select the type of account to create from the adjacent drop-down menu. Once you have made your choice, you can then click the

“Continue” button to open the “Add Account” window.

Here you enter the

“Name” and “Number” for the account into the fields of the same name shown.

Note that account numbering must be enabled within your QuickBooks company file in order to view the

“Number” field. Then enter any additional account information within the “Optional” section shown. When you are finished, click either the

“Save & Close” or “Save & New” buttons to save the account. If you choose the

“Save & New” choice, be sure to change the account type, if needed, by using the “Type” drop-down at evaluation

22.2- Creating and Using Other Current Asset Accounts:

The for prepaid expenses. Your inventory account is an example of an other current asset.

Let’s take a “Prepaid Rent” other current asset account as an example. Assume that you have signed an agreement to lease a new office space for $1,000 per month. Also assume that you needed to make a prepayment of 6 months worth of rent before you could move into the new office space. If you are using the accrual accounting method, then you must attribute expense to the period it is incurred, not when you actually pay it. So, you would NOT want to simply write a check for the next 6 months worth of rent and then attribute the entire amount to the

“Rent Expense” account for the month in which you wrote the check, as that will not accurately reflect when the rent expense is actually incurred. Instead, you can use the other current asset account of

“Prepaid Rent” to help you show the rent expense as it is actually incurred.

Sample-

©TeachUcomp, Inc.

“Write Checks” window when the first payment is due by selecting

Advanced QuickBooks 87

Assets and Liabilities

22.2- Creating and Using Other Current Asset Accounts-

(cont’d.):

landlord for the vendor. On the only!

is being traded to another asset account for the prepayment of the rent. Then click into the next row on the

“Expenses” tab and select the “Rent Expense” account. QuickBooks should then attribute the remaining

1,000 to the account for the first month of rent as it is being incurred. For the next five months after this, you will not write a check for the rent, but rather create a

“General Journal Entry” that decreases the amount in the

“Prepaid Rent” other current asset account by $1,000 and increases the amount of the “Rent Expense” account by $1,000 to show the other current asset being

“used up” and to show the rent expense being incurred in the correct accounting period.

22.3- Removing Value from Other Current Asset Accounts:

In this lesson, you will learn how to enter a current asset account. purposes account into which five months of prepaid rent was placed. As you later incur your monthly rent expense of

$1,000 per month over the next five months, you will use up part of the prepaid rent expense and enter each change to the value of that account either through the

“General Journal Entry” window or by making an entry directly into the register for that account. So for each of the following five months, decrease the amount of the rent as it is actually incurred from the

“Prepaid Rent” other current asset account and assign the value of the rent to the

“Rent” expense account.

To enter a

“General Journal Entry” select “Company| Make General Journal Entries…” from the

Menu Bar to open the

“General Journal Entry” window. In this window, enter the date of the entry into the

“Date” field. Then enter a reference number for the entry into the “Entry No.” field. Then click into the first row under the

“Account” column and select the “Rent Expense” account. Then enter 1,000 into the adjacent

“Debit” column within that row to show the increase to the selected rent expense account. Then click into the

“Account” column in the next blank row and select the “Prepaid Rent” other current asset account. into the

Close” button. evaluation

Alternately, you can create a

“General Journal Entry” within the associated account register by for account’s value. The advantage to this method is

“Credit” and “Debit” rules for the account types, as long as you know which account should be increasing or decreasing. So using the example above, another way to create this entry is to open the

“Chart of Accounts” window by selecting “Lists| Chart of Accounts” from the

Menu Bar. Within the

“Chart of Accounts” window, you can then double-click the “Prepaid Rent” account shown in order to open its account register. Within the account register window, click into the next blank transaction row. Enter the date of the transaction into the

“Date” field. Then enter a reference code into the

“Ref” field. Then click into the “Decrease” column and enter “1,000.” You can then select the “Rent

Expense” account from the “Account” drop-down within the transaction row. You can then click the “Record” button at the bottom of the transaction window to record the transaction. Note that QuickBooks enters the term

“GENJRN” into the “Type” field so that you can see that this is simply another way to record a general journal entry.

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 88

Assets and Liabilities

22.4- Creating Fixed Asset Accounts:

A only!

operation of your business, like vehicles, computers, furniture and some office equipment. Many times the purchase of a fixed asset will also incur a long-term liability, such the example of acquiring an auto loan to purchase a new vehicle.

Fixed assets are not for immediate sale, but they do have a value. Since they are useful for a long time, you don’t completely charge their entire cost to the year in which you purchased them. Instead, you spread their cost over several years (called the

“useful life” of the asset). However, because fixed assets wear out or become obsolete (like computers), their value declines constantly from the day you purchase them. When the value of fixed assets decline over a period, the amount of value that is lost is called depreciation. The total amount of this decline over a period of time is called accumulated depreciation.

We will now examine one method for creating fixed asset accounts, noting their original value, and purposes

Balance Sheet for clarity of reporting. However if you are currently tracking your asset depreciation in other ways, you can rest assured that you can continue using your own method.

When you refer to the value of a fixed asset at any point in time you are referring to its

“book value.”

This is determined by subtracting its accumulated depreciation, which is the total amount of depreciation that has occurred since the asset’s original purchase date, from its original cost.

Usually, you will want your company’s Balance Sheet to show the original cost of an asset on one line with the accumulated depreciation subtracted from the original cost on a second line, and the current, or

“book,” value on a third line. The method you will learn in this lesson allows you to see each asset’s cost and its accumulated depreciation separately on your balance sheet.

In order to do this, you need to create a primary fixed asset account for each asset and then create two subaccounts under each primary fixed asset account: one for the

“original cost” and one for the

“accumulated depreciation.”

First, create a new primary evaluation file’s “start date,” as that value will be determined by the two subaccounts

(“original cost” and “accumulated depreciation”) that you will need to create to track its book value.

Next, create the two for

“Subaccount of” within the “New

Account” window and select the correct primary fixed asset account for which these subaccounts will track the original cost and depreciation.

When creating the

“Original Cost” subaccount for assets purchased BEFORE your company file’s

“start date,” enter the “Opening Balance” as the original cost of the asset. For assets purchased AFTER the

“start date,” leave the “Opening Balance” field blank as the value of the asset will come from the value of the transactions you still need to enter, such as a loan to repay or checks to write to purchase the fixed asset.

When creating the

“Accumulated Depreciation” subaccount, the amount you enter as the “Opening

Balance” also depends on whether you acquired the asset after or before your company file’s “start date.” If you acquired the asset AFTER the

“start date,” leave the “opening balance” field blank. If you acquired the

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 89

Assets and Liabilities

22.5- Creating Liability Accounts:

to be paid off within the year, it is an

“Other Current Liability.” If you have a line of credit, that would be an example of an other current liability.

You can also create

“Long Term Liability” accounts for amounts you expect to pay off in a period greater than a year. For example, when you purchase a fixed asset like a vehicle, you typically incur a long term liability like an auto loan.

When you make payments on the liabilities, note that the amount due will often be attributed partially to the liability account, reducing the amount owed, and partially to interest expense. If you make the loan payments within the

“Write Checks” window by hand, be sure to record the correct amounts on the

“Expenses” tab using the associated amortization table for the loan. That way you will know how much of each payment made will reduce the amount owed, and how much is interest expense. You can also make use of the

“Loan Manager” within QuickBooks to assist you in creating loan payments if you know the terms of the loan.

22.6- Setting the Original Cost of the Fixed Asset:

purposes

When purchasing a fixed asset, attribute any amounts spent or borrowed to buy the fixed asset directly to the

“Original Cost” subaccount. For example, if you took out a loan to buy a fixed asset, assign the value of the loan to the

“Original Cost” subaccount for the fixed asset when entering the original amount of the loan into the associated long-term liability account register.

22.7- Tracking Depreciation:

Your accountant should provide you with the amounts to enter for depreciation on your fixed assets.

They should at least double-check your depreciation entries. When you have those amounts, you can enter them into the evaluation

“Depreciation Expense.” The

“Accumulated Depreciation” subaccount will always have a negative balance, as it tracks the loss of value to the fixed asset which is its parent account. for

Sample-

©TeachUcomp, Inc. Advanced QuickBooks 90

Assets and Liabilities

22.8- The Loan Manager:

Loan Manager to set up a payment schedule. Using the Loan Manager allows you to manage all of the loans that you have to pay from a single screen.

To add a loan to the Loan Manager, select

“Banking| Loan Manager” from the Menu Bar. This will launch the

“Loan Manager” window where you can click the “Add a Loan…” button. In the “Add a Loan” window, select the name of the liability account that you want to add from the

“Account Name” drop-down.

The balance of the account will be shown as the

“Current Balance.” Use the “Lender” drop-down to select the name of the bank who lent you the money. Then enter the

“Origination Date” of the loan. This is the date used to calculate the loan maturity date and the number of remaining payments. Enter the original amount of the loan into the

“Original Amount” field. In the “Term” section enter the terms of the loan by typing a number and selecting the time increments from the drop-down. Then click

“Next” to continue.

On the next screen, enter the due date of the next payment in the box provided. In the

“Payment desired. In the escrow payment, select the purposes asset account used to track escrow payments. You can also leave a check in the

“Alert me 10 days before a payment is due” checkbox to have that feature applied. Then click “Next” to continue.

On the next screen, enter the interest rate here as a percentage into the

“Interest Rate” text box. In the

“Compounding Period” drop-down select the type of compounding used for the loan: “Monthly,” or

“Exact Days.” If you select “Exact Days,” then select whether the lender is using a 360 or 365 day year for their calculations from the

“Compute Period” drop-down. Select the bank account from which you make the payments in the

“Payment Account” drop-down. Then use the “Interest Expense Account” to select the expense account that you use to track loan interest payments. Use the

“Fees/Charges Expense Account” to select the expense account used to record the amounts assessed for late payments and other penalties.

When you are finished, click the

“Finish” button. The loan will be added into the “Loan List” in the “Loan

Manager” window. You can click it to select it and then click the three tabs below it to view the “Summary” of the loan, the

“Payment Schedule,” or the “Contact Info” for the lender. evaluation payment is:

” drop-down to select either “A regular payment,” or “An extra payment.” Double-check the payment information to ensure that the amounts listed are correct. Then use the drop-down in the

“Payment in the for

If you need to edit a loan, select the loan name in the

“Loan List” section of the “Loan Manager” window, and then click the

“Edit Loan Details…” button. This will launch you through the same wizard that you used to create the loan, allowing you to change any information as needed. To delete a loan from the

“Loan Manager,” select the name of the loan in the “Loan List” and then click the “Remove Loan…” button.

Click

“Yes” in the confirmation dialog box to remove the selected loan.

In the

“Loan Manager” window you can also click the “What If Scenarios…” button to launch the

“What If Scenarios” dialog box. You can use the drop-down at the top of this dialog box to answer hypothetical questions about your loans, such as

“What if I change my interest rate?” You can select a question you wish to investigate further and enter in any requested information in the area below. This can

Sample-

aren’t paying too much for the money you

Advanced QuickBooks 91

Assets and Liabilities

22.9- The Fixed Asset Item List:

enter information about the purchase price of an asset, its purchase date, and whether the asset was new or used at purchase. You can also enter the asset’s sale price if you decide to sell the asset at a later point in time.

To open this list, select

“Lists| Fixed Asset Item List” from the Menu Bar. To add a fixed asset item, click the

“Item” button in the lower left corner of the list and select “New” from the pop-up menu. That will launch the

“New Item” window. Enter the asset information that you wish in this screen and click “OK” when you are finished. Note that there are custom fields available for your fixed asset list. You can create up to five custom fields, just as you would create custom fields within the

“Item List.” However, you must be in single-user mode to do this. purposes for evaluation

Sample-

ACTIONS-

Assets and Liabilities

CREATING ASSET AND LIABILITY ACCOUNTS:

Display the chart of accounts by selecting “Lists| Chart of Accounts” from the Menu Bar.

only!

the pop-up menu that appears.

In the “New Account: Choose Account Type” window, select the option button that corresponds to the type of account that you want to create. Note that for many of the asset and liability account types, you may need to select the “Other Account Type” option button and then select the type of account to create from the adjacent drop-down menu.

Then click the “Continue” button to continue to the “Add Account” window.

In the “Name” field, type a name for the account.

You can enter an account number into the “Number” field if you have enabled account numbering within your company file.

7. If the account is to be the subaccount of another primary account you have created, check the

Enter any optional account information into the “Optional” section.

purposes

“Save & New” button to save the account but leave the “Add Account” window open. If you choose the

“Save & New” choice, be sure to change the account type, if needed, by using the “Type” drop-down at the top of the window to select your account type before creating the next new account.

USING ACCOUNT REGISTERS TO CREATE GENERAL JOURNAL ENTRIES:

Display the chart of accounts by selecting “Lists| Chart of Accounts” from the Menu Bar.

2. Double-click on the desired balance sheet account (Asset or Liability) to open its account register.

3. In the next blank transaction row within the account register window, enter the date of the transaction into the “Date” field.

Enter a reference number into the “Ref” field.

5. Then click into transaction row. evaluation

7. Click the “Record” button at the bottom of the transaction window to record the transaction. for

1. Select

“Company| Make General Journal Entries…” from the Menu Bar to open the “General Journal

Entry” window.

2. Enter the date of the entry into the “Date” field.

3. Enter a reference number for the entry into the “Entry No.” field.

4. Then click into the first row under the “Account” column and select the account to debit.

5. Enter the amount to debit the selected account into the adjacent “Debit” column within that row.

6. Click into the “Account” column in the next blank row and select the account to credit.

7. QuickBooks should automatically attribute the balancing amount to the “Credit” column. If not, click into

Sample-

ACTIONS-

Assets and Liabilities

ADDING A LOAN TO THE LOAN MANAGER:

Select “Banking| Loan Manager” from the Menu Bar.

Click the “Add a Loan…” button. only!

Select the name of the liability account that you want to add from the “Account Name” drop-down.

Use the “Lender” drop-down to select the name of the bank who lent you the money.

Enter the “Origination Date” of the loan.

Enter the original amount of the loan into the “Original Amount” field.

In the “Term” section, enter the terms of the loan by typing a number and selecting the time increments from the drop-down.

Click “Next” to continue.

9. Enter the due date of the next payment in the box provided.

10.

In the “Payment Amount” field, enter the total amount of the loan payment.

11.

Enter the “Next Payment Number,” if desired.

12.

13.

purposes

14.

Check the “Alert me 10 days before a payment is due” checkbox to have that feature applied.

15.

Click “Next” to continue.

16.

Enter the interest rate here as a percentage into the “Interest Rate” text box.

17.

In the “Compounding Period” drop-down select the type of compounding used for the loan: “Monthly,” or

“Exact Days.” If you select “Exact Days,” then select whether the lender is using a 360 or 365 day year for their calculations from the “Compute Period” drop-down.

18.

Select the bank account from which you make the payments in the “Payment Account” drop-down.

19.

Use the “Interest Expense Account” drop-down to select the expense account you use to track loan interest payments.

20.

Use the “Fees/Charges Expense Account” drop-down to select the expense account used to record the amounts assessed for late payments and other penalties.

21.

When you are finished, click the “Finish” button. evaluation

for any information needed.

DELETING A LOAN IN THE LOAN MANAGER:

Select the name of the loan in the “Loan List” and then click the “Remove Loan…” button.

Click “Yes” in the confirmation dialog box to remove the selected loan.

Sample-

ACTIONS-

Assets and Liabilities

RUNNING “WHAT IF” SCENARIOS IN THE LOAN MANAGER:

Click the “What If Scenarios…” button to launch the “What If Scenarios” dialog box.

2. Use the drop-down at the top of this dialog box to select a hypothetical question to answer. only!

3. Enter any requested information in the area below.

Click “Close” when you are finished.

ADDING FIXED ASSET ITEMS TO THE FIXED ASSET ITEMS LIST:

Select “Lists| Fixed Asset Item List” from the Menu Bar.

Click the “Item” button in the lower left corner of the list and select “New” from the pop-up menu.

In the “Asset Name/Number” field, type the name or number of the asset.

Use the “Asset Account” drop-down to select the asset account used to track the value of the asset.

In the “Purchase Information” section, set whether the item is “New” or “Used.”

6. You can type a purchase description into the next text box.

Set the purchase date in the “Date” field.

Enter the “Cost” of the item in that field. purposes

Enter the name of the “Payee/Vendor” in the field provided.

10. Fillin any optional information you want to track in the “Asset Information” section.

11. When you sell the asset, you can edit the item and fill-in the sales information when it is sold.

12.

Click “OK” when you are finished. for evaluation

Sample-

EXERCISES-

Assets and Liabilities

Purpose:

To create and use fixed asset and long term liability accounts and add a loan to the only!

Exercises:

Open QuickBooks.

Select

“File| Close Company” from the Menu Bar if you have a company file open to get to the “No

Company

Open” dialog box.

Click the

“Open a sample file” button, and select “Sample product-based business” from the drop-

down of choices.

Click

“OK” on the sample file message box.

Select

“File| Back Up Company| Create Local Backup” from the Menu Bar.

Use the

“Create Backup” window to make a local backup of this company file, so that you may

After backing up the file, select

Click the purposes the

“New” command from the pop-up menu.

Within the

“Add Account” Choose Account Type” window, select the “Fixed Asset (major purchases)” option button and then click the “Continue” button to open the “Add Account” window.

10.

Type

“New Car” into the “Account Name” field.

11.

Click the

“Save & New” button.

12.

Ensure the

“Type” drop-down is still set to “Fixed Asset.”

13.

Type

“Original Cost” into the “Account Name” field.

14.

Click the

“Subaccount of” checkbox and then use the adjacent drop-down to select “New Car.”

15.

Click the

“Save & New” button.

16.

Type

“Accumulated Depreciation” into the “Account Name” field.

17.

Click the

“Subaccount of” checkbox and then use the adjacent drop-down to select “New Car.”

18.

Click the

“Save & New” button.

19.

Use the

20.

Type

“New Car Loan.” evaluation

21.

Click the

“Save & Close” button.

22.

23.

Double-click on the

Select for

24.

Enter

“35000” into the “Increase” column.

25.

Select the

“New Car Loan” long term liability account from the “Account” drop-down.

26.

Click the

“Record” button to record the general journal entry through the account register.

27.

Click the

“X” in the upper-right corner of the “New Car:Original Cost” account register window to close it.

28.

Inspect the changes to the balances shown within the selected accounts in the

“Chart of Accounts.”

29.

Click the

“X” in the upper-right corner of the “Chart of Accounts” window to close it.

30.

Select

“Banking| Loan Manger” from the Menu Bar to open the “Loan Manager” window.

31.

Click the

“Add a Loan…” button to open the “Add Loan” window.

32.

Sample-

EXERCISES-

Assets and Liabilities

Exercises-

(Cont’d.):

33.

Use the

“Lender” drop-down to select “Great Statewide Bank.”

34.

Use the

“Origination Date” calendar selector to choose “12/15/2017.”

35.

Enter

“35000” into the “Original Amount” field.

36.

Enter

“72” into the “Term” field and ensure that the adjacent drop-down is set to “Months.” only!

37.

Click the

“Next” button to continue.

38.

Enter

“1/15/2018” into the “Doe Date of Next Payment” field.

39.

Enter

“614.85” into the “Payment Amount” field.

40.

Click the

“Next” button to continue.

41.

Enter

“6” into the “Interest Rate” field.

42.

Select

“Checking” from the “Payment Account” drop-down menu.

43.

Click the

“Finish” button to add the loan to the “Loan Manager” window.

44.

Click the

“Close” button within the “Loan Manager” window to close it.

45.

46.

You can close the company file by selecting

You can close QuickBooks by selecting purposes for evaluation

Sample-

CHAPTER 23-

Equity Accounts

23.1- Equity Accounts

23.2- Recording an Owner’s Draw

23.3- Recording a Capital Investment

purposes only!

for evaluation

Sample-

Equity Accounts

23.1- Equity Accounts:

liabilities). If you sold all your assets today and paid off your liabilities using the money received from the sale of your assets, the money you’d have left over would be your equity.

A balance sheet shows your company assets, liabilities, and equity on a particular date. Because equity is the difference between total assets and total liabilities, it’s also true that total assets equal the sum of total liabilities and equity.

As you enter the opening balances of your assets and liabilities while creating the company file,

QuickBooks calculates the amount of equity and records it in an equity account called Opening Balance

Equity. In addition to the

“Opening Balance Equity” account, QuickBooks often sets up another type of equity account for you called Retained Earnings. This account tracks your company’s net income from previous fiscal years. QuickBooks automatically transfers your profit (or loss) to Retained Earnings at the end of each fiscal year.

If your company is a sole proprietorship, you chart of accounts. All the equity belongs to the purposes

23.2- Recording an

Owner’s Draw:

If your company is a sole proprietorship, you can take draws against the equity that you have in your company. To record an owner’s draw, you simply create a check to yourself, which you may place in your

“Other Names” list to avoid confusion, and assign the amount of the check to the equity account that you use to record your draws, like

“Owner’s Equity:Owner’s Draws.”

23.3- Recording a Capital Investment:

or a business partner invests in your business. You use an equity account to track capital investments. You may call it something like

“Owner’s Equity:Owner’s Contributions.” the

To create a capital investment, select

“Banking| Make Deposits” from the Menu Bar. Click “Cancel” on the

“Payments to Deposit” window and any other screen that may appear, if you want to record the

In the for

“Make Deposits” window.

“Make Deposits” window, select the account into which you want to deposit the money from

“Deposit To” drop-down. In the next blank transaction line, select the name of the person making the investment from the

“Received From” drop-down. Then select the appropriate equity account you use to track capital investments from the

“From Account” drop-down. Then enter the amount that they are investing into the

“Amount” column. Then just save the transaction by clicking the “Save & Close” button.

Sample-

ACTIONS-

Equity Accounts

MAKING AN OWNER’S DRAW:

Select “Banking| Write Checks” from the Menu Bar.

2. Make the check out to the owner. only!

In the “Expenses” area of the check, assign the amount of the check to the equity account you use to record owner's draws.

Click “Save & Close” to save the check.

MAKING A CAPITAL INVESTMENT:

Select “Banking| Make Deposits” from the Menu Bar.

Click “Cancel” to deposit the investment check by itself.

In the “Make Deposits” window, choose the bank account into which you're depositing the money.

4. In the detail area, enter the name of the person from whom you received the money and the amount of the investment.

6. Save the transaction. purposes for evaluation

Sample-

EXERCISES-

Equity Accounts

Purpose:

To be able to make an owner’s draw and record capital investments. only!

Exercises:

Open QuickBooks.

Select

“File| Close Company” from the Menu Bar if you have a company file open to get to the “No

Company

Open” dialog box.

Click the

“Open a sample file” button, and select “Sample service-based business” from the drop-

down of choices.

Click

“OK” on the sample file message box.

Select

“File| Back Up Company| Create Local Backup” from the Menu Bar.

Use the

“Create Backup” window to make a local backup of this company file, so that you may

After backing up the file, select n the

“Pay to the Order of” field, type “Larry Wadford.” purposes

For the

“$” field, type “100.”

10.

In the

“Expenses” area of the check, assign the amount of the check to “Owner’s Equity:Owner's

Draw.

”

11.

Click

“Save & Close” to save the check.

12.

Select

“Banking| Make Deposits” from the Menu Bar.

13.

Click

“Cancel” to deposit the investment check by itself.

14.

In the

“Make Deposits” window, select “Checking."

15.

In the first row, select

“Larry Wadford” from the “Received From” drop-down.

16.

From the "From account" drop-down list, choose

“Owner’s Equity:Owner’s Contributions.”

17.

For the

“Chk No.” field, type “1234.”

18.

For the

“Pmt Meth.,” select “Check.”

19.

For the

“Amount,” type “500.”

20.

Click

“Save & Close.”

21.

evaluation

22.

You can close QuickBooks by selecting

“File| Exit” from the Menu Bar. for

Sample-

CHAPTER 24-

Writing Letters with QuickBooks

24.1- Using the Letters and Envelopes Wizard

24.2- Editing Letter Templates

only!

purposes for evaluation

Sample-

Writing Letters with QuickBooks

24.1- Using the Letters and Envelopes Wizard:

be useful to note that you can also send customized letters to them without having to retype much of the information. QuickBooks provides you with a variety of different business letters that you can edit as needed to suit your particular company.

QuickBooks uses the

“Letters and Envelopes” wizard to assist you in creating these letters. To start the

“Letters and Envelopes” wizard, choose “Company| Prepare Letters with Envelopes” from the Menu Bar.

Then select the type of letters to create from the side menu of choices that appears.

In the

“Letters and Envelopes” wizard that appears, answer the questions posed to you in each screen and then click the

“Next” button to continue through the screens until you are finished. Note that in order to use this feature, you must have Microsoft Word and either QuickBooks Pro or Premier.

24.2- Editing Letter Templates:

enforce global editing changes to all future copies of a letter by editing the letter template, which is the original copy of the letter, in order to make changes to all future copies of the letter that you produce.

When you edit the letter template, you can add and edit the body of the letter as well as change dynamic information by using the

“Add-Ins” tab in using Microsoft Word 2007 through 2010 to add more fields of data. Be careful, though! Any changes that you make and save to the letter template will affect all future letters based on the template. for evaluation

Sample-

ACTIONS-

Writing Letters with QuickBooks

USING THE LETTERS AND ENVELOPES WIZARD:

1. Select

“Company| Prepare Letters with Envelopes” from the Menu Bar.

2. From the side menu that appears, select the type of letter you want to create.

The “Letters and Envelopes” wizard will then appear. only!

4. Answer any questions posed in each screen, and click the “Next” button to proceed until finished.

5. Change the letters as needed in Microsoft Word.

6. In Microsoft

Word 2007 through 2010, click the “File” tab in the Ribbon.

Click the “Print” command at the left side of the backstage view in Microsoft Word.

8. Set any printing options that you would like in the area to the right.

Click the “Print” button in the area to the right to print the documents.

EDITING THE QUICKBOOKS LETTER TEMPLATES:

1. Select

2. In the

3. Click the “Next” button. purposes

In the “Types of Letters” section, chose the option button to display a listing of letters within the selected category in the list to the right.

In the “Letters Templates Available” list, select the name of the letter template that you want to edit.

Click the “Next” button.

7. Edit the document in Microsoft Word, adding any additional fields using the

“Add-Ins” tab in Microsoft

Word 2007 through 2010.

Click the “Save” button in the Quick Access Toolbar at the very top of the Microsoft Word 2007 or 2010 application to save your changes to the template.

9. Close Microsoft Word by clicking the “X” in the upper right corner of the application window. for evaluation

Sample-

Purpose:

EXERCISES-

Writing Letters with QuickBooks

Exercises:

Open QuickBooks.

Select

“File| Close Company” from the Menu Bar if you have a company file open to get to the “No

Company

Open” dialog box.

Click the

“Open a sample file” button, and select “Sample product-based business” from the drop-

down of choices.

Click

“OK” on the sample file message box.

Select

“File| Back Up Company| Create Local Backup” from the Menu Bar.

Use the

“Create Backup” window to make a local backup of this company file, so that you may

After backing up the file, select purposes from the Menu Bar.

In the

“Letters and Envelopes” window, click the “Next” button to continue.

Click the

“Accept credit app” letter.

10.

Click the

“Next” button to continue.

11.

For the

“Name,” type “Tom Ferguson.”

12.

For the

“Title,” type “President.”

13.

Click the

“Next” button to continue.

14.

Click

“OK” in the “QuickBooks Information Is Missing” dialog box which appears.

15.

Look at the letters that Microsoft Word has created.

16.

When finished, click the

“X” in the upper-right corner of the Microsoft Word application to exit the

18.

19.

program.

17.

Click the

“Cancel” button within the “Letters and Envelopes” window. evaluation for

Sample-

CHAPTER 25-

Company Management

25.1- Viewing Your Company Information

25.2- Setting Up Budgets

25.3- Using the To Do List

25.4- Using Reminders and Setting Preferences

25.5- Making General Journal Entries

25.6- Using the Cash Flow Projector

purposes only!

for evaluation

Sample-

Company Management

25.1- Viewing Your Company Information:

If you move or get a new phone number, that update. To update your only!

from the Menu Bar. Here you can change any information that is inaccurate and just click

“OK” to save your changes.

25.2- Setting Up Budgets:

Budgets can be created for either Profit and Loss or Balance Sheet accounts, but they do have to be account-based. You can create them from scratch, from actual data from the previous fiscal year, or from the previous fiscal year's budget. A budget is uniquely identified by its fiscal year, the account type (either

Profit and Loss or Balance Sheet) and if desired, further identified by Customer:Job or Class.

To create a budget, select

“Company| Planning and Budgeting| Set Up Budgets” from the Menu Bar.

If you have already created a budget, you can click the purposes

If you selected a

“Balance Sheet” budget, then just click “Finish” to begin entering budget data. If you chose

“Profit and Loss," you can then specify the additional criteria of segmenting it by either

“Customer:Job” or “Class," if class tracking has been turned on. You can then click “Next” again to choose whether you want to

“Create budget from scratch” or “Create budget from previous year's actual data” by selecting the appropriate option button. Click

“Finish” to create the new budget.

At that point, you can simply place the amounts that you want to spend for each account into the months shown. When you have entered your budget, simply click

“Save” to save the data. Then click “OK” to close the budget window.

25.3- Using the To Do List:

in the

“To Do” list at any time or you can use the “Reminders” list to see the notes whose dates are due.

To create a new

“To Do” note, select “Company| To Do List” from the Menu Bar. Click the “To Do” button and choose type of for drop-down below that to select the type of individual. This can be either a

“With” checkbox. Then use the

“Lead,” “Customer,” “Vendor,” or

“Employee.” Then use the next drop-down to choose the name of the specific individual required. Then enter the date that the item is due by selecting a date from the

“Due” field. If you want to specify a time, check the

“Time” checkbox and then enter a time into the adjacent fields. You can then enter detailed notes about the item into the

“Details” field. Then select the status of the item by choosing one from the “Status” drop-down. When finished, click the

“OK” button to add the item to your “To Do” list.

When you complete a

“To Do” item, you can double-click on its entry within the “To Do List” window to open the

“Edit To Do” window. Here you can then select “Done” from the “Status” drop-down and then click the

“OK” button. The item will then appear within the “To Do List” window with a checkmark in the far left click the

Sample-

Company Management

25.4- Using Reminders and Setting Preferences:

appear to tell you if you have transactions to complete, such as paying your bills, or depositing funds. If you don’t see the reminders window when you open up QuickBooks and you would like to, just turn it on by selecting

“Edit| Preferences…” from the Menu Bar. Select “Reminders” from the scroll box at the left side of the dialog box and click the

“My Preferences” tab. Check the “Show Reminders List when opening a

Company file” checkbox to enable the feature.

25.5- Making General Journal Entries:

You can create general journal entries to record transactions that you don’t enter through the other forms and screens in QuickBooks. Actually, you create general journal entries when you make entries directly into the account registers for transactions like depreciation expense transactions. While QuickBooks purposes amounts must balance for the transaction to be posted. To create a general journal entry, select

“Company|

Make General Journal Entries

…” from the Menu Bar. Then select the accounts involved in the transaction and enter their credit or debit amounts. To post the balanced transaction, click

“Save & Close.” for evaluation

Sample-

Company Management

25.6- Using the Cash Flow Projector:

Projector to create an estimate of the cash flow in your company for the next six weeks. After you set up the information needed to create the cash forecast, you can then view the cash available in a report. You can even go in and view how making changes to estimated receipts and disbursements could affect your future cash balance.

To start the Cash Flow Projector, select

“Company| Planning & Budgeting| Cash Flow Projector” from the Menu Bar. This will launch the Cash Flow Projector. Read about what this tool will provide to you on the initial screen and then click

“Next” to continue.

In the second screen check any accounts that you want to use as the beginning cash balance for your company. You can then enter any manual adjustments to that balance in the

“Adjust Balance” box at the bottom of this window. Note that this adjustment will be used each time you create the cash flow forecast, although it can be changed later, if desired. Click

“Next” to continue.

In the next screen, you can use the drop-down under the purposes manual projection method then enter a date, description and amount for your cash receipts in the section provided below the drop-down. Repeat this to enter all desired cash receipts for each week and then enter any adjustments in the weekly summary section at the bottom of the screen. If you selected an automatic projection method then edit the itemized cash receipts as necessary and enter any adjustments in the weekly summary. If you have entered all your cash transactions in QuickBooks, an adjustment may not be necessary. Click

“Next” to continue.

In the next screen, you can enter any expenses that are not accounts payable. You can either enter detailed expenses, or a summary of multiple expenses in one line. Enter these into the

“Business

Expenses” section. You can also make adjustments at this time, as well. Note that each screen has a

“Preview Projection” button at the bottom that you can click to see how your changes will impact the forecast. Then click

“Next” to continue.

In the last screen, you can review the bills in your accounts payable account. Here you can adjust evaluation

Projection. This document can be printed by clicking the

“Print…” button at the bottom of the window. You can also click the

“Save as PDF…” button to save it as a PDF document file. When you are finished, click for

Sample-

ACTIONS-

Company Management

VIEWING YOUR COMPANY INFORMATION:

Select “Company| Company Information…” from the Menu Bar.

2. Change any information needed.

Click “OK” to save your changes. only!

SETTING UP BUDGETS:

Select “Company| Planning & Budgeting| Set Up Budgets” from the Menu Bar.

Click the “Create New Budget” button.

In the “Create New Budget” window, choose the fiscal year for the new budget and click “Next” to continue.

Then choose “Profit and Loss” or “Balance Sheet” accounts by clicking the appropriate option button,

and click “Next” to continue. class tracking has been turned on. purposes actual data” by selecting the appropriate option button, and then clicking “Next” to continue.

Click “Finish” to create the new budget.

8. At that point, you can simply place the amounts that you want to spend for each account for the months shown. When you have entered your budget, simply click “Save” to save the data.

Click “OK” to close the budget window.

USING THE TO DO LIST:

Select “Company| To Do List” from the Menu Bar.

Click the “To Do” button, and choose “New To Do” from the pop-up menu that appears.

3. In down.

4. Select evaluation

5. If the task requires the presence of another individual, check the “With” checkbox.

6. Then use the dropdown below that to select the type of individual. This can be either a “Lead,”

8. Then for

9. If you want to specify a time, check the “Time” checkbox and then enter a time into the adjacent fields.

10. You can then enter detailed notes about the item into the “Details” field.

11. Then select the status of the item by choosing one from the “Status” drop-down.

12. When finished, click the “OK” button to add the item to your “To Do” list.

13. When you complete a “To Do” item, you can double-click on its entry within the “To Do List” window to open the “Edit To Do” window.

14. Then select “Done” from the “Status” drop-down and click the “OK” button. The item will appear within the “To Do List” window with a checkmark in the “Done” column.

15. To delete an item from the list, click on its name within the “To Do List” window.

16. Then

17. Then

Sample-

ACTIONS-

Company Management

USING REMINDERS AND SETTING PREFERENCES:

Select “Edit| Preferences…” from the Menu Bar.

Click “Reminders” from the scroll box at the left. only!

Click the “My Preferences” tab, and select “Show Reminders when opening a Company file” to turn it on.

MAKING GENERAL JOURNAL ENTRIES:

Select “Company| Make General Journal Entries…” from the Menu Bar.

2. Select the accounts involved in the transaction and list their credit and debit amounts.

To post the transaction, select “Save & Close.”

USING THE CASH FLOW PROJECTOR:

purposes

Click “Next” to continue.

3. Check any accounts that you want to use as the beginning cash balance for your company. You can then enter any manual adjustments to that balance in the “Adjust Balance” box at the bottom of this window.

Click “Next” to continue.

5. Use the dropdown under the “Itemized Cash Receipts” section to select which projection method you want to use for cash receipts.

6. If you selected the manual projection method then enter a date, description and amount for your cash receipts in the section provided below the drop-down. Repeat this to enter all desired cash receipts for each week and then enter any adjustments in the weekly summary section at the bottom of the screen.

7. If you selected an automatic projection method then edit the itemized cash receipts as necessary and

Click “Next” to continue. evaluation

9. Enter any expenses that are not accounts payable. You can either enter detailed expenses, or a

10.

Click “Next” to continue.

12.

for

13.

This document can be printed by clicking the “Print…” button at the bottom of the window.

14.

You can also click the “Save as PDF…” button to save it as a PDF document file.

15.

When you are finished, click “Close” to close the projection.

16.

You can close the Cash Flow Projector by clicking the “Close” button.

Sample-

EXERCISES-

Company Management

Purpose:

To be able to manage company information. only!

Exercises:

Open QuickBooks.

Select

“File| Close Company” from the Menu Bar if you have a company file open to get to the “No

Company

Open” dialog box.

Click the

“Open a sample file” button, and select “Sample product-based business” from the drop-

down of choices.

Click

“OK” on the sample file message box.

Select

“File| Back Up Company| Create Local Backup” from the Menu Bar.

Use the

“Create Backup” window to make a local backup of this company file, so that you may

After backing up the file, select

Review the information and then click the purposes

Select

“Company| Make General Journal Entries…” from the Menu Bar.

10.

Click into the first row, under the

“Account” column and select “63000 - Office Supplies.”

11.

In the

“Debit” column, type “15.”

12.

In the

“Memo” field, type “Paper.”

13.

In the next row, under the

“Account” column, type “10400 - Petty Cash.”

14.

In the

“Memo” field, type “Paper.”

15.

Make sure that the

“Credit” column shows “15.”

16.

Click

“Save & Close” to post the transaction.

17.

You can close the company file by selecting

“File| Close Company” from the Menu Bar.

18.

You can close QuickBooks by selecting

“File| Exit” from the Menu Bar. for evaluation

Sample-

CHAPTER 26-

Using QuickBooks Tools

26.1- Company File Cleanup

26.2- Exporting List Data to an IIF File

26.3- Advanced Importing of Data

26.4- Updating QuickBooks

26.5- Using the Calculator

26.6- Using Portable Company Files

26.7- Using the Calendar

purposes only!

for evaluation

Sample-

Using QuickBooks Tools

26.1- Company File Cleanup:

company file. This can remove detailed transactions prior to a specified date and inactive list records from your company file and replace them with general journal entries. This can often improve performance in company files with a high volume of transactions entered.

You can start the wizard by selecting

“File| Utilities| Condense Data…” from the Menu Bar. At that point, simply step through the screens answering the questions posed to you and clicking the

“Next” button to continue. When you are ready to begin the backup process, click the

“Begin Condense” button.

Note that during this process an additional copy of your company file- called the

“archive copy” is created. The archive copy contains a copy of your company’s data before any transactions are removed.

The archive file name will contain the date you run the condense process, your company name, and the label "Archive Copy.

” You should never use the archive copy for active data entry. You can use the archive copy to run reports for those periods in which transactions have already been condensed. file in a separate backup process. purposes

26.2- Exporting List Data to an IIF File:

You can export your list data into an IIF file. This file format stores list information in a text format for transfer to another company file, or transfer to other applications that can use IIF files. You create export files by selecting

“File| Utilities| Export| Lists to IIF Files…” from the Menu Bar.

In the next screen you then choose which lists you would like to export to the IIF file. Then click

“OK” to continue and open the

“Export” dialog box. Here you can select the folder into which you would like to save the export file and what you want to name the file. When you are ready to continue, click the

“Save” button to save the IIF file with the information from the selected lists.

26.3- Advanced Importing of Data:

evaluation the

You can import list data into QuickBooks using Microsoft Excel. You can also easily copy and paste for

“3.11- Adding Multiple List Entries from Excel” in

“Introductory QuickBooks” manual. However, in addition to being able to copy and paste the Excel data, you can also perform an advanced importing of Excel data into your QuickBooks lists.

You can import information from an Excel workbook into

QuickBooks’ customer, vendor, item or account lists. To do this, select

“File| Utilities| Import| Excel Files…” from the Menu Bar.

In the window that appears, click the

“Advanced Import” button. On the “Set Up Import” tab, click the

“Browse…” button at the right end of the “File:” text box to launch a dialog box where you can select the

Excel file to import. Then you can select which sheet in the workbook to import from the drop-down below the file name. If the data that you are importing has column labels, check the

“This data file has header rows” checkbox to use the topmost row of data in the selected sheet as a header.

In the

“Data Mapping” section, you must then tell QuickBooks which columns in the Excel file should mapping:

Sample-

“<Add New>” choice from the “Choose a

Advanced QuickBooks

“Mapping name:” text box. Then

Using QuickBooks Tools

26.3- Advanced Importing of Data (cont.):

select into which list you want to import the data from the only!

Excel import file, click into the right column and select the name of the Excel column (if your list has headers) to which the data corresponds. When you are finished, click

“Save” to save the data mapping.

To preview the data before importing, click the

“Preview” button. This will show you the data as it would look when imported, along with any errors that would occur if the data was imported. At the bottom of this window you can select how you want QuickBooks to handle imported rows that cause errors. When the data looks good, click

“Import” to import the data.

26.4- Updating QuickBooks:

You can ensure that your version of QuickBooks is current by selecting

“Help| Update

QuickBooks updates. If you want to change that setting, in the you can select to turn the feature on or off by selecting purposes have it turned off, then you have to connect to the Internet and click the

“Update Now” button on the

“Overview” screen to download the updates manually.

26.5- Using the Calculator:

If you need to perform some quick calculations, you can access the calculator in QuickBooks by selecting

“Edit| Use Calculator” from the Menu Bar. That will bring up the calculator so you can doublecheck numbers, or perform whatever other task for which you need a calculator.

26.6- Using Portable Company Files:

evaluation could send them a portable company file, which has a .QBM extension. When they open the file you sent for the original copy while someone makes changes to another copy, which you can import later, then use the

“Accountant’s Review” feature, instead.

To make a portable company file, select

“File| Create Copy…” from the Menu Bar.

In the window that appears, select the

“Portable company file” option button, and then click the

“Next” button to continue. In the “Save Portable Company File” dialog box, choose where you want to save the portable copy of the company file and what you want to call it. When you are ready, click the

“Save” button. Then click

“OK” at the message box that tells you QuickBooks must close and reopen the company file first. QuickBooks will then create the portable copy for you. Click

“OK” in the message box that appears.

To later open a portable company file to create a new company file that you can use, open

Sample-

“File| Open or Restore Company…” from the Menu Bar. In the window that appears,

Advanced QuickBooks 115

Using QuickBooks Tools

26.6- Using Portable Company Files-

(cont’d.):

File only!

and then click the

“Next” button when you are ready to continue.

In the

“Save Company File as” dialog box that then appears, you can enter the name and location to which you want to save the company file that will be created from the portable copy. When that has been accomplished, click the

“Save” button to open the portable copy and create a new company file from the data, which you can then use for data entry.

26.7- Using the Calendar:

You have a calendar feature that allows you to see company information, such as when bills are due, in a calendar layout. You can open the calendar by clicking the toolbar, by clicking the the Menu Bar. purposes

Within the calendar, you can see the current date selected within a month-style layout. For the selected date, you can also see the transactions that were entered, bills due, and other company transactions shown in a listing at the bottom of the calendar window. To the right of the calendar you can see a listing of upcoming transaction items that are due, such as to do items and bills, as well as past due items. Note that you can open any items shown within these areas by simply double-clicking on them to open the original transaction window.

At the top of the calendar is a toolbar that you can use to change the dates displayed. You can use the left and right pointing arrows to move through the months shown. The name of the currently displayed month and year is then displayed within the toolbar. If you wish to jump back to select the current date, you can click the

“Today” button within the toolbar. You can change the layout of the calendar by clicking either the

“Daily View,” “Weekly View,” or “Monthly View” buttons.

If you wish to select a particular date within the calendar, you can either click on the date shown in toolbar at the top of the window. evaluation

“Show” drop-down. The choice selected by default is

“All Transactions,” however you can choose to view only selected transactions for

“Esc” key on your keyboard.

“x” in the

Sample-

ACTIONS-

Using QuickBooks Tools

CLEANING UP COMPANY DATA FILES:

1. Select

“File| Utilities| Condense Data…” from the Menu Bar.

3. Continue through the wizard screens, choosing items to be removed.

4. Click the “Begin Condense” button when you are sure you want to proceed.

Click “OK” to dismiss the message and open the “Back Up Company File” window.

Click “Create Back Up” and then condense your file.

EXPORTING LISTS TO AN IIF FILE:

1. Select

“File| Utilities| Export| Lists to IIF Files…” from the Menu Bar.

2. Click the checkboxes for the list or lists that you want to export.

Click “OK.”

purposes

IMPORTING IIF DATA FILES:

1. Select

“File| Utilities| Import| IIF Files…” from the Menu Bar.

Use the “Look in:” drop-down to navigate to the folder that contains the import (IIF) file.

3. Double-click on the file to import the data.

IMPORTING EXCEL DATA:

1. Select

“File| Utilities| Import| Excel Files…” from the Menu Bar.

2. In the window that appears, click the

“Advanced Import” button.

On the “Set Up Import” tab, click the “Browse…” button at the right end of the “File:” text box to launch a

If the imported data has column labels, check the “This data file has header rows” checkbox. for evaluation

Click the “<Add New>” choice from the “Choose a mapping:” drop-down to create a new data mapping. column and select the name of the Excel column to which the data corresponds.

10.

When you are finished, click “Save” to save the data mapping.

11.

To preview the data before importing, click the “Preview” button.

12. At the bottom of this window you can select how you want QuickBooks to handle import errors.

13.

When the data looks good, click “Import” to import the data.

Sample-

ACTIONS-

Using QuickBooks Tools

UPDATING QUICKBOOKS MANUALLY:

1. Connect to the Internet.

2. Select

“Help| Update QuickBooks…” from the Menu Bar.

Click the “Update Now” button to manually download and install any new updates.

Click the “X” in the upper right corner of the window to close it. only!

USING THE CALCULATOR:

Select “Edit| Use Calculator” from the Menu Bar.

Click the “X” in the upper right corner of the calculator to close it when you are finished.

CREATING PORTABLE COMPANY FILES:

1. To make a portable company file, select

2. In purposes button to continue.

In the “Save Portable Company File” dialog box, choose where you want to save the portable copy of the company file and what you want to call it. When you are ready, click the “Save” button.

Then click “OK” at the message box that tells you QuickBooks must close and reopen the company file first. QuickBooks will then create the portable copy for you.

Click “OK” in the message box that appears.

OPENING PORTABLE COMPANY FILES:

1. To open a portable company file to create a new company file that you can use, open QuickBooks and

select “File| Open or Restore Company…” from the Menu Bar. evaluation

box. for

When that has been accomplished, click the “Save” button to open the portable copy and create a new company file from the data, which you can then use for data entry.

Sample-

ACTIONS-

Using QuickBooks Tools

USING THE CALENDAR:

only!

2. You can use the left and right pointing arrows shown in the toolbar at the top of the calendar to move through the months shown.

3. If you wish to jump back to select the current date, you can click the “Today” button within the toolbar.

4. You can change the layout of the calendar by clicking either the “Daily View,” “Weekly View,” or

“Monthly View” buttons.

5. If you wish to select a particular date within the calendar, you can either click on the date shown in the calendar view, or you can select a date from the “Select a date” calendar drop-down shown in the toolbar at the top of the window.

6. You can also filter the transactions shown within the calendar by using the “Show” drop-down. The choice selected by default is “All Transactions,” however you can choose to view only selected transactions by making a choice from this drop-down menu.

7. When purposes for evaluation

Sample-

EXERCISES-

Using QuickBooks Tools

Purpose:

There are no exercises for this lesson. only!

purposes for evaluation

Sample-

CHAPTER 27-

Using the Accountant’s Review

27.1- Creating an Accountant’s Copy

27.2- Transferring an Accountant’s Copy

27.3- Importing Accountant’s Changes

27.4- Removing Restrictions

only!

purposes for evaluation

Sample-

Using the Accountant’s Review

27.1- Creating an

Accountant’s Copy:

You can create an ask for one. When an only!

changes made by your accountant in the accountant’s copy back into your company file. This gives you a bit more flexibility for data entry than the portable company file option does.

To create an accountant’s copy, open the company file for which you want to create an accountant’s copy and then select

“File| Accountant’s Copy| Save File…” from the Menu Bar. You then must click the

“Next” button in the wizard that appears and then select a dividing date. The dividing date is the date before which your accountant can make changes, but you cannot. Once that has been selected, click the

“Next” button to continue. At that point, select the removable media to which you will be saving the copy and then click the

“Save” button to create the copy. After creating the accountant’s copy, give the saved file you created to your accountant to make the necessary changes.

At this point, your original company file will display text that says

“Accountant’s Changes Pending” rearranging the existing accounts in the chart of accounts. purposes

27.2- Transferring an

Accountant’s Copy:

If you work with an accountant who uses the QuickBooks for Accountants Edition, you can use the

“File Transfer” ability within QuickBooks Pro to send an accountant’s copy to your accountant. To use this feature you must be using QuickBooks Pro 2013 or better, have an Internet connection and an e-mail address, and you must know your accountant’s e-mail address. This feature allows you to save the accountant’s copy to an Intuit web server, which notifies your accountant via e-mail to download the copy.

To perform this task, select

“File| Accountant’s Copy| Send to Accountant…” from the Menu Bar. In the

“Send Accountant’s Copy” window that appears, click the “Next” button to continue. In the next screen, use the

“Dividing Date” drop-down to select a dividing date for your accountant’s copy file. The dividing date click the evaluation e-mail address into the

“Your name” and “Your e-mail address” fields. Then click the “Next” button to for accountant’s copy that is stored on the web server. Your accountant will need this password in order to access your accountant’s copy. You can enter

“Admin” account within your company file, if desired. You can also enter your own strong password into the

“Password” and “Reenter password” fields. A strong password is at least 7 characters long with at least 1 capital letter and 1 digit. Note that you must let your accountant know what the password is so that they can download your company file. You can then enter any additional instructions for your accountant into the

“Note” field. Then click the “Send” button to create and upload your accountant’s copy to the web server, and be sure to let your accountant know what the password is.

Your accountant will receive an e-mail with a link that they can click in order to download and open your accountant’s copy. Note that they will need to enter the password you created in order to do this. Also, your original company file will display text that says

“Accountant’s Changes Pending” within its title bar.

After creating the accountant’s copy, you can still perform normal data entry in the original company file, but Sample-

Using the Accountant’s Review

27.3- Importing

Accountant’s Changes:

After creating an changes back into your company file to restore full functionality to your original company file. only!

If your accountant sends you a file, insert the copy of the changes that your accountant gave to you on the removable media (i.e. floppy disk, CD-ROM, flash drive). Then open your company file and select

“File| Accountant’s Copy| Import Accountant’s Changes from File…” from the Menu Bar. You must make a backup before you can import the accountant’s changes. Make the backup file. Then navigate to the folder or drive that contains the file with the changes and double-click on the file to open it and import the changes. Note that the

“Accountant’s Changes Pending” message in the title bar of the company file has disappeared. That means that you have successfully imported the changes.

If you receive the changes from the internet by using the

“File Transfer” feature, then you will receive an e-mail from your accountant informing you that the changes to the accountant’s copy are complete and that you have changes to import. At that point, you have 30 days to import the accountant’s changes into

Copy| Import will see a listing of the purposes

Changes

Pending” message has also disappeared from the title bar of the company file.

27.4- Removing Restrictions:

After creating an accountant’s copy of your company file, you will see the “Accountant’s Changes

Pending” message within the title bar of the company file. You may also notice that some tasks, such as deleting accounts within the chart of accounts, cannot be performed on a company file when it is waiting for changes from an accountant. If it turns out that you will not be importing changes from your accountant, then you can remove the restrictions placed on your company file by creating an accountant's copy. Note that if you do this you will not be able to import any changes to your company file from the existing accountant’s copy, however you will be able to restore the full functionality of your company file. evaluation

“File|

Accountant’s Copy| Remove Restrictions…” from the Menu Bar. In the message box that then appears onscreen, check the checkbox and then click the

“OK” button to remove the accountant’s copy restrictions. for

Sample-

ACTIONS-

Using the Accountant’s Review

CREATING AN ACCOUNTANT’S COPY FILE:

1. Open

Accountant’s Copy| Save File…” from the Menu Bar. only!

2. Click the “Next” button in the wizard that appears and then select a dividing date. The dividing date is the date before which your accountant can make changes, but you cannot.

3. Once that has been selected, click the “Next” button to continue.

4. At that point, select the removable media to which you will be saving the copy and then click the “Save” button to create the copy.

5. After creating the accountant’s copy, give the saved file you created to your accountant to make the necessary changes.

6. At this point, your original company file will display text that says “Accountant’s Changes Pending” within its title bar. You can still perform normal data entry in the original company file, but note that you cannot make some kinds of changes to the company file- such as deleting, renaming, or structurally rearranging the existing accounts in the chart of accounts.

TRANSFERRING

AN ACCOUNTANT’S COPY: purposes

1. Open the company file for which you want to create an accountant’s copy and then select “File|

Accountant’s Copy| Send to Accountant…” from the Menu Bar.

2. In the “Send Accountant’s Copy” window that appears, click the “Next” button to continue.

3. In the next screen, use the “Dividing Date” drop-down to select a dividing date for your accountant’s copy. The dividing date is the date before which your accountant can make changes, but you cannot.

4. After selecting a dividing date, click the “Next” button to continue.

5. In the next screen, enter your accountant’s e-mail address into the “Accountant’s e-mail address” and

“Reenter accountant’s e-mail address” fields.

6. Then enter your name and email address into the “Your name” and “Your e-mail address” fields.

7. Then click the “Next” button to continue.

8. In evaluation enter your own strong password into the “Password” and “Reenter password” fields. A strong password

9. You for

10. Then click the “Send” button to create and upload your accountant’s copy to the web server, and be sure to let your accountant know what the password is.

11. Your accountant will receive an e-mail with a link that they can click in order to download and open your accountant’s copy. Note that they will need to enter the password you created in order to do this.

12. Also

, your original company file will display text that says “Accountant’s Changes Pending” within its title bar. After creating the accountant’s copy, you can still perform normal data entry in the original company file, but note that you cannot make some kinds of changes to the company file- such as deleting, renaming, or structurally rearranging the existing accounts in the chart of accounts.

Sample-

ACTIONS-

Using the Accountant’s Review

IMPORTING THE

ACCOUNTANT’S CHANGES: on the removable media (i.e. floppy disk, CD-ROM, flash drive).

2. Then open your company file and select “File| Accountant’s Copy| Import Accountant’s Changes from

File…” from the Menu Bar.

3. Make a backup before you import the accountant’s changes.

4. Then navigate to the folder or drive that contains the file with the changes and double-click on the file to open it and import the changes.

5. Note that the “Accountant’s Changes Pending” message in the title bar of the company file has disappeared. That means that you have successfully imported the changes.

6. If

you receive the changes from the internet by using the “File Transfer” feature, then you will

receive an email from your accountant informing you that the changes to the accountant’s copy are complete and that you have changes to import. At that point, you have 30 days to import the accountant’s changes into your company file.

7. To

Accountant’s Changes from Web…” from the Menu Bar. purposes

8. After the download is completed, you will see a listing of the accountant’s changes appear within your company file.

9. Note that the “Accountant’s Changes Pending” message has also disappeared from the title bar of the company file.

REMOVING ACCOUNTANT’S COPY RESTRICTIONS:

To remove restrictions from a company file, open the company file and then select “File| Accountant’s

Copy| Remove Restrictions…” from the Menu Bar.

2. In the message box that then appears onscreen, check the checkbox and then click the “OK” button to remove the accountant’s copy restrictions. for evaluation

Sample-

EXERCISES-

Using the Accountant’s Review

Purpose:

There are no exercises for this lesson. only!

purposes for evaluation

Sample-

CHAPTER 28-

Using the Help Menu

28.1- Using Help

only!

purposes for evaluation

Sample-

Using the Help Menu

28.1- Using Help:

question can be found by using the

“QuickBooks Help” feature. You can search for help topics by subject here and display the information that is found. Another help feature is the online

“QuickBooks Support” that can assist you with technical support for your QuickBooks program, and also allow you to search for online help topics regarding the QuickBooks software. A listing of some of the various help features available within QuickBooks 2013 are shown in the table below.

Topic

QuickBooks Help

QuickBooks Support

What’s New?

Year End Guide

Does

A checklist that lists the steps you should review at the end of your business year.

Access by selecting…

Allows you to search for topics within all of the local and online help resources for additional

Select “Help| QuickBooks Help” from the Menu Bar. assistance.

You can contact someone in customer support directly, or search the online database for an answer to your questions. purposes

Allows upgrading users to quickly familiarize themselves with the new features in

Select “Help| What’s New” from the

Menu Bar.

QuickBooks.

Select “Help| Year End Guide” from the Menu Bar. for evaluation

Sample-

ACTIONS-

Using the Help Menu

USING HELP:

1. Select

“Help” from the Menu Bar. the help resource within a new window. purposes for evaluation

Sample-

EXERCISES-

Using the Help Menu

Purpose:

There are no exercises for this lesson. only!

purposes for evaluation

Sample-

QuickBooks Keyboard Shortcuts

General

To start QuickBooks without a company file

To suppress the desktop windows (at

Open Company window)

Display information about QuickBooks

Key

Ctrl + doubleclick

Alt (while opening)

Esc



(Enter key)

Activity

Account list, display

Check, write

Copy transaction in register

Customer:Job list, display

Delete check, invoice, transaction, or item from list

Edit lists or registers

Key

only!

Ctrl + J

Ctrl + D

Cancel

Record (when black border is around

OK, Next or Previous button)

Record (always)

QuickFill and Recall (type first few letters of name and press Tab, name fills in)

Find transaction

Ctrl + E

abc Tab

Dates

Next day

Previous day

Today

First day of the Week

Last day of the weeK

First day of the Month

Ctrl +



(Enter key)

Key

+ (plus key)

- (minus key)

Go to register of transfer account

Help in context, display

History of A/R or A/P transaction

Invoice, create purposes

Ctrl + H

Ctrl + I

Ctrl + L

Ctrl + M

Memorized transaction list, display Ctrl + T

Last day of the montH H

New invoice, bill, check or list item

First day of the Year Y

Paste copied transaction in register

Last day of the yeaR R

Date calendar Alt + down arrow

QuickZoom on report

QuickReport on transaction or list item

Editing

Edit transaction selected in register

Key

Ctrl + E

Delete character to right of insertion Del point

Delete character to left of insertion point Backspace

Delete line from detail area

Insert line in detail area

Cut selected characters Ctrl + X

Show list

Use list item

Transaction journal, display evaluation one

Copy selected characters

Paste cut or copied characters

Increase check or other from number by

Decrease check or other form number for

Ctrl + C

Ctrl + V

+ (plus key)

- (minus key) by one

Report column to the right

Report column to the left

Beginning of current field

End of current field

Line below in detail area or on report

Undo changes made in field Ctrl + Z

Line above in detail area or on report

Ctrl + F

Ctrl + G

Ctrl + N

Ctrl + V

Ctrl + P



(enter key)

Ctrl + Q

Ctrl + R

Ctrl + S

Ctrl + U

Ctrl + Y

Key

Tab

Shift + Tab

Right arrow

Left arrow

Home

End

Down arrow

Up arrow

Help window

Display Help in context

Select next option or topic

Select previous option or topic

Display selected topic

Close popup box

Sample-

Key

Tab

Shift + Tab



(Enter key)

Esc

Down one screen

Up one screen

Next word in field

Previous word in field

First item on list or previous month in register

Last item on list or next month in register

Close active window

Advanced QuickBooks

Page Down

Page Up

Ctrl +



Ctrl +



Ctrl + PgUp

Ctrl+ PgDn

Esc

131

Hello! I am an AI chatbot specifically trained to assist you with the TeachUcomp Advanced User manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Create estimates
Track time
Use credit card accounts
Manage assets and liabilities
Write letters
Use QuickBooks tools
Manage your company
Use the accountant's review
Use the help menu

Frequently asked questions

QuickBooks Advanced includes features such as creating estimates, tracking time, using credit card accounts, managing assets and liabilities, writing letters, using QuickBooks tools, company management, using the accountant's review and using the help menu.

QuickBooks Advanced allows you to manage your company by setting up budgets, using the To Do List, using Reminders, making general journal entries, and using the Cash Flow Projector.

QuickBooks Advanced has a wide range of reporting features, such as QuickReports, QuickZoom, preset reports, report customization, memorized reports, and memorized report groups.