USE AND CARE GUIDE

HUSKY 46 IN. 8-DRAWER MOBILE WORKBENCH

Husky Customer Service

. . ., ,

1-888-43-HUSKY

-

SKU # TBD

Model # HOTC4608B1CD

Table of Contents

Table of Contents ......................................................

Safety Information........................................................

Warranty ........................................................................

Pre-Assembly.......................................................

Tools Required ..............................................................

Hardware Included .......................................................

Specifications................................................................

Package Contents ................................................

3

4

4

4

4

5

2

2

Safety Information

1.

2.

3.

4.

5.

6.

7.

8.

Do not open more than one drawer at a time.

Do not let children approach the product.

To help prevent the product from tipping, load the product starting with the bottom drawers.

Keep the locking casters’ brake set unless you are moving the cabinet. This will help to prevent the product from rolling.

Lock all drawers before moving the product.

Make sure all drawers close tightly before locking/unlocking.

Do not step in any drawer/drawers.

When moving this product, push it rather than pull it.

9.

Do not alter this product in any manner.

Assembly ...............................................................

Operation ................................................................

Maintenance ..........................................................

Care and Cleaning ...................................................

Service Parts ....................................................................

8

9

6

7

8

DANGER: may fall or cause the product to tip.

DANGER: Do not move the product prior to

.

drawers could come open and make the product unstable and tip.

DANGER: Do not mount this product on a truck bed or any other moving object.

WARNING: Keep the product on a level

.

tip if stored or moved on an uneven surface.

CAUTION: Do not lift this product directly with a forklift or tow with any mechanical devices.

CAUTION: Do not exceed the maximum weight loading capacity, including the weight for each drawer. See Specifications on page 4.

CAUTION: Only transport this product when empty. Properly secure when transporting.

2

Warranty

The manufacturer warrants the product to be free from defects in materials and workmanship for a period of three 3 years from date of

, , , , ,

.

,

warranty shall not apply to the finish on any portion of the products considered normal wear and tear.

,

The manufacturer does not warrant and specifically disclaims any warranty whether express or implied of fitness for a particular purpose , other or , / disclaims any liability and shall not be liable for any consequential costs involved in the replacement or repair of said product.

3 Please contact 1-888-43-

.

HUSKY for further assistance.

TOOLS REQUIRED

Safety goggles

HARDWARE INCLUDED

NOTE: Hardware not shown to actual size.

AA BB

Part

AA

BB

CC

DD

Description

Bolt M6 x 15L

Washer

Bolt M8 x 20L

10 mm/13 mm wrench

SPECIFICATIONS

Maximum capacity per drawer (1-7)

Maximum capacity per drawer (bottom deep drawer)

Maximum capacity (total unit)

Quantity

4

16

16

1

75 lbs

100 lbs

1000 lbs

NOTE: Begin product assembly close to the final

.

is heavy and may be difficult to move after assembly.

CC DD

4

J

PACKAGE CONTENTS

I

H

G

A

F

E

D

B

C

I

J

G

H

E

F

C

D

Part

A

B

Description

Wood top

Side handle

Rolling cabinet

Swivel caster with brake

Drawer slide 75 lbs (pair)

Rigid caster

Drawer

Husky badge

Key (set)

Lock

Quantity

1

1

1

1

8

1

9

2

1

2

5

Please contact 1-888-43-

.

HUSKY for further assistance.

Assembly

1

Attaching the side handle

□ Attach the side handle B) to the cabinet using

(AA).

□ Tighten all bolts with the 10 mm wrench (DD).

four bolts

NOTE: The holes in the cabinet are tapped and do not require nuts.

□

BB

2

Installing the casters

CAUTION: Do not over tighten the screws .

□ Ensure all cabinet drawers are securely locked into place

□ Lay the rolling cabinet (C) on its back Use the packaging material to protect the finish.

□ Mount the two swivel casters with brake (D) to the rolling

(C) caster .

The s wivel casters with brake (D) should installed on the same side as the side handle (B)

be

.

□ Mount the two rigid casters (F) to the rolling cabinet using four bolts (CC) and washers (BB) per caster.

(C)

□ Tighten all bolts with a 13 mm wrench (DD).

DD

F

B

B

DD

AA

Optional Attachment

□ The rolling cabinet has pre-mounted threaded nuts on the back and sides of the unit for the installations of the optional Pegboard

Back Wall (Model#D6TC09001) Refer to huskytools.com for details.

CC

D

C

Operation

1

Locking and unlocking the unit

IMPORTANT : The drawers must be fully closed before locking / unlocking the unit.

□ To lock the unit, insert the key (I) into the lock (J) and turn it 1/4-turn to the left. Then remove the key.

□ To unlock the unit, insert the key (I) into the lock (J) and turn it 1/4-turn to the right. Then remove the key.

2

Removing the drawers

□ Fully extend and empty the drawer.

□ On the slide, lift up the plastic release lever on one slide and push down the plastic release lever on the other slide, and gently pull the drawer out so the slides can ride over the stops.

3

Installing the drawers

□ Pull the slides and slide carrier out until fully extended.

□ Hold the slide on the cabinet while aligning it with the slide on the drawer.

□ Slightly insert one side and repeat for the other side.

□ Slowly push the drawer until it is fully closed to engage the slide.

□ Open the drawer and close it to verify proper operation.

7 Please contact 1-888-43-HUSKY for further assistance.

Maintenance

1

Maintaining the casters

□ Grease the casters annually using high quality bearing grease.

2

Maintaining the drawers

□ Periodically clean the drawer trim and inside the drawers with a mild detergent and water.

□ Remove grease and oil with a standard, nonflammable cleaning fluid.

□ The use of drawer liners is recommended to protect the finish inside the drawers and make the drawers

The Home Depot and can be cleaned with soap and water.

□ Lubricate the slides semi annually with grease or equivalent.

.

Care and Cleaning

□ This steel product has been coated with industrial powder coating for a durable finish. To help protect this finish, do not allow harsh chemicals such as oil or grease to remain on the powder coating surface. Use a glass cleaner ( Windex or equivalent product) to clean and maintain all powder coated surfaces.

□ The wood top is made of Parawood (also called Rubberwood) which has a polyurethane coating to help protect it from moisture. It can be cleaned

with most household cleaners, such as Windex .

8

Service Parts

J

I

A

B

E

F

I

E

F

Part

A

B

D

J

Part # Description

K2532025 Wood top

D6TC04001 Side handle

K03220053 Swivel caster w/brakes

K0204022 Drawer slide 75 lbs (pair)

K03220053 Rigid caster

K06120021 Key (set)

K06120022 Lock

Quantity

1

1

2

9

2

1

1

D

C

9

.

Please contact 1-888-43-HUSKY for further assistance.

Questions, problems, missing parts? Before returning to the store, call

Husky Customer Service

8 a.m.-6 p.m., EST, Monday-Friday

1-888-43-HUSKY

HUSKYTOOLS.COM

Retain this manual for future use.