KOHLER K-5870-2-FF Installation Guide

K-5870
WHEATLANDTM
OFFSET KITCHEN SINK
Roughing-In
Product Information
Applicable product:
Top-mount kitchen sink with two holes
Top-mount kitchen sink with four holes
Under-mount kitchen sink with five holes
Fixture*:
Bowl area, large
Recommended accessories:
P-Trap
K-5870-2
K-5870-4
K-5870-5U
17-1/4″ (438 mm) x
18-3/4″ (476 mm)
11-1/8″ (283 mm) x
15-7/8″ (403 mm)
9″ (229 mm)
Ø 3-7/8″ (98 mm)
Bowl area, medium
Bowl depth
Drain hole
Faucet hole
Top-mount models
Ø 1-3/8″ (35 mm)
Under-mount model
Ø 2-3/8″ (60 mm)
* Approximate measurements for comparison only.
Included component:
Cut-out template
Under-mount sink kit
K-9000
Optional accessories:
Bottom bowl rack, left bowl
Bottom bowl rack, right bowl
Duostrainer® sink strainer
K-6148
K-6159
K-8801
Installation Notes
Install this product according to the installation guide.
NOTICE: The countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by the Kohler Co. (Call 1-800-4-KOHLER.) Kohler
Co. is not responsible for cut-out errors when the incorrect
cut-out template is used.
Fixture conforms to ASME Standard A112.19.1/CSA B45.2. All
dimensions are nominal.
1148511-7
1054375
K-5870-4
17-5/16"
13-7/16"
(440 mm)
(341 mm)
2-5/16" 4" (102 mm)
4" (102 mm)
(59 mm)
9-7/16"
(240 mm)
K-5870-2
2-1/4"
(57 mm)
2-5/16"
(59 mm)
6-11/16"
(170 mm)
2-5/16"
(59 mm)
13-7/16"
(341 mm)
17-5/16"
(440 mm)
K-5870-5U
13-7/16"
17-5/16"
(341 mm)
(440 mm)
11" (279 mm)
4" (102 mm)
3-1/2"
(89 mm)
7-1/16" (179 mm)
23" (584 mm)
33" (838 mm)
9/16"
(14 mm)
9-5/8"
(244 mm)
15"
(381 mm)
1-1/2" OD
WHEATLANDTM OFFSET KITCHEN SINK
1148508-1-C
22" (559 mm)
2-1/4"
(57 mm)
2-1/4"
(57 mm)