INSTEON 2245-222 Hubs & Controller Quick Start Guide

Insteon Hub

Quick Start Guide

Insteon Hub

Status LED Linking/Idle

Unlinking

Ethernet Port

Factory Reset Power

Ethernet

Cable

Power

Cable

Installation

Connect your Hub to the internet and a power outlet using the cables provided. Avoid switched outlets or power strips.

X

Download the App

From your mobile device, download and install Insteon for Hub from your device’s app store.

rink.hockeyapp.net

INSTEON for Hub

Don’t feel like searching? Scan the

QR Code and tap your store.

Create an Account

Launch the App and follow the on-screen instructions to create an account and setup the Insteon Hub.

INSTEON

Sign In

Create an Account

You’re done setting up your Insteon Hub; now start adding devices.

Adding Devices

You can add devices by tapping Add a Device found in the drawer. Follow the on-screen instructions to add light switches, sensors, cameras and more.

INSTEON

Favorites

All Devices

Scenes

Check-In

Thermostats

Add a Device

Create a Scene

Create a Scene

Control a single light or a group of devices simultaneously. Visit Scenes and then tap Add.

Trigger a Scene

Sensors can activate scenes. To setup a trigger, simply add a sensor to a scene.

Insteon Motion, Open/Close, Door and Leak Sensors sold separately.

Create a Schedule

Assign a schedule to individual devices or scenes. Go to the device or scene properties and tap Schedule.

INSTEON

Schedule

Time of Day

Sunrise

Sunset

Configure Alerts

Receive an email alert or push notification when a sensor or device is activated.

Enable alerts by visiting the device properties and tapping Alerts.

!

!

Remote Access

Hub 2 automatically configures itself for remote access so you can control and monitor your home from anywhere in the world.

Learn More

For the complete Owner’s Manual, video tutorials, product support and more, visit: insteon.com/support

MANUAL

Protected under U.S. and foreign patents (see www.insteon.com/patents)

©2014 Insteon Rev 03.26.15