Home8 Mini Cube HD 2-camera Starter Kit Security Camera System Quickstart Guide

Mini Cube HD 2-camera Starter Kit – Quickstart Guide
What’s inside
Hardware:
2x Mini Cube HD cameras
1x Shuttle intelligent hub
1x External 110dB siren
Additional accessories:
2x Camera power adapter
2x Camera power cables
1x Shuttle power adapter
Step 1: Assemble your hardware
Unpack all of your hardware near your home router first.
• Connect Shuttle to your DCHP-enabled router with the
included Ethernet cable
• Connect Shuttle, Mini Cube HD cameras,and siren to
power adapters and plug them in
Step 2: Set up your smartphone
Your phone will disrupt the setup process if it goes to sleep. So
before you register your devices, disable the autolock feature on
your smartphone. You can enable it after you’ve set up your
system. Next:
• Connect your smartphone to your home Wi-Fi
• Download the Home8 app from the App Store or Google Play
• Follow the on-screen instructions and set up your account
Step 3: Mount your devices
Before you mount your cameras, see if they’re within
Shuttle’s range.
• Take your cameras to the room you want to install them in
• Open the app, tap Video
If you see video, mount your cameras and enjoy.
1x Ethernet cable
1x 16GB USB thumbdrive
Troubleshooting Tips
Are your devices listed in your app?
If you’re having trouble installing your devices, see if they’re registered in your Home8 app:
• Navigate to
> Device Management to see if all your devices are listed
• Tap + and follow the on-screen instructions to add any missing devices
Are your devices communicating with Shuttle?
If your devices don’t connect to Shuttle, they might be too far away. Take them to a location that’s closer to Shuttle
and try again. If they do connect, you’ll know the range of your sensor and where to install a range extender.
Alternatively, you can move Shuttle closer to your device.
If your devices still don’t communicate with Shuttle, even when they’re in the same room, navigate to
Device Management > + on the Home8 app to add your devices again.
Do you need to reset your camera?
If your camera isn’t communicating with Shuttle, your app may ask you to reset your camera.
• Locate the pinhole on the left side of the camera
• Insert a pin and hold for 3-5 seconds untill you hear a beep
• Return to the app and follow the onscreen instructions
Need help installing your Home8 system?
Call 1-844-800-6482
Mon-Fri 9am-7pm, or Sat-Sun 10am-5pm, Pacific
[email protected]
>
">