advertisement
▼
Scroll to page 2
of 5
Item #597-730 Model #24816-021 USE AND CARE GUIDE SENZE 52 INCH CEILING FAN INSTALLATION Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-877-527-0313 HAMPTONBAY.COM THANK YOU Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware shown to actual size unless noted otherwise in the table below. EE AA LL HH MM BB FF II CC JJ GG KK DD Part Description Quantity AA Plastic wire nut 9 BB Mounting bracket screw (preassembled) 2 CC Blade attachment screw and fiber washer 13 DD Balance kit (not to scale) 1 EE Remote control holder mounting screw 2 FF Remote control holder plug (preassembled) 2 GG Clevis pin (preassembled) 1 HH Cotter pin (preassembled) 1 II Collar setscrew (preassembled) 2 JJ Light kit mounting plate screw (preassembled) 3 KK Light kit mounting screw (preassembled) 3 LL Metal nut (preassembled to the light kit) 1 MM Decorative nut (not to scale) 1 5 HAMPTONBAY.COM Please contact 1-877-527-0313 for further assistance. Pre-Installation (continued) PACKAGE CONTENTS A B L C D G E M F N J H O I K P Part Description Quantity Part Description Quantity A Mounting bracket (preassembled) 1 I Light kit 1 B Canopy 1 J Glass shade 1 C Canopy bottom cover 1 K Glass frame 1 D Hanger ball/downrod assembly 1 L Receiver 1 E Coupling cover 1 M Remote control 1 F Fan motor assembly 1 N 12V MN21/A23 battery 1 G Blade 4 O Remote control holder 1 H Light kit mounting plate 1 P 40 Watt candelabra bulb 3 6 Installation MOUNTING OPTIONS NOTE: You may need a longer downrod to maintain proper blade clearance when installing on a steep, sloped ceiling. The maximum angle allowable is 18° away from horizontal. If the canopy (B) touches the hanger ball/downrod assembly (D), then remove the decorative canopy bottom cover (C) and turn the canopy (B) 180° before attaching the canopy (B) to the mounting bracket (A). WARNING: To reduce the risk of fire, electric shock, or personal injury, mount the fan to an outlet box marked acceptable for fan support using the screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician. If your ceiling fan does not have an existing UL listed mounting box, install one using the following instructions: OO □ Disconnect the power by removing the fuses or turning off the circuit breakers. □ Secure the outlet box (NN) (not included) directly to the building structure. Use appropriate fasteners and materials (not included). The outlet box and its bracing must be able to fully support the weight of the moving fan (at least 35 lbs.). Do not use a plastic outlet box. NN To hang your fan where there is an existing fixture but no ceiling joist, you may need an installation hanger bar (OO) (not included) as shown above. The illustrations below show three different ways to mount the outlet box (NN) (not included). NN NN NN A 7 HAMPTONBAY.COM Please contact 1-877-527-0313 for further assistance. Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-877-527-0313 HAMPTONBAY.COM Retain this manual for future use. EUR06000001-Y
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement