KYOCERA
CubePro™
3D PRINTER
A NEW DIMENSION
IN PRINTING
3D printers use a variety of very different methods of additive manufacturing technologies, but they all share one key thing in common,
they create three dimensional objects by building layer by layer. 3D print technology brings a limitless number of uses and benefits to
users in almost every single market place.
The CubePro™ 3D printer features:
Stabilised printing environment for accurate professional
quality prints.
Automated settings to ensure effortless printing.
Easy feed cartridges for prolonged material life.
Triple colour print capability for multi-colour, multi-material
printing (Trio only).
Prints in three different materials - Plastic (ABS, PLA) and Nylon.
Over 24 colours available to print in.
New colour touchscreen improves user interface.
Device has Wi-Fi accessibility.
PLASTIC JET PRINTING (PJP)
PJP is a solid-based rapid prototyping method that extrudes material layer by layer to build a model. The system consists of a build
platform, extrusion nozzle, and control system.
The build material is melted and then extruded through a specially designed head onto a platform to create a two-dimensional cross
section of the model. The cross section quickly solidifies, and the platform descends where the next layer is built upon the previous
layer. This continues until the model is complete.
Print size – The CubePro™ features one of the
largest build platform in its class. With prints
approximately 2.5 times larger than any other
desktop 3D printer (285.4 x 270.4 x 230mm) with
ultra-high resolution settings of 70-micron thin
print layers, professional quality printing has
never been so accessible.
Quality – Guaranteed faster, more accurate prints
with stabalised print mechanics and easy feed
cartridges for prolonged material life.
A controlled process environment ensures
accuracy and reliability of print for effortless,
professional quality everytime for your largest ABS
plastic prints.
Connectivity – Connect conveniently with an
easy to use colour touchscreen display and WiFi
capability.
SOFTWARE
All CubePro™ printers include complimentary conversion software. This application converts your 3D model into layered slices
(G-code), ready for printing on your machine.
There are 3 different types of software available to buy alongside the 3D Printer:
Cubify Invent – easy to use tool for 3D design.
Cubify Sculpt – shape your ideas in virtual clay.
Cubify Design – tool for advanced 3D modeling.
COMPATIBILITY
3D SYSTEMS COMPANY INFORMATION
Windows requirements
CubePro™ dimensions
32 or 64 bit operating systems:
CubePro™ dimensions (unpackaged)
Windows XP Professional or Home Edition with
Service Pack 3, Windows 7, Windows 8, Windows 8.1
578mm (W) x 578mm (l) x 591mm (h)
Windows is required for ad-hoc WiFi print job
submission – if not already installed, the Cube
software will automatically install the Microsoft .NET
4.0 framework
CubePro™ weight
Mac OSX requirements
Trio - Triple head printer - 38.5kg
Single head printer - 36Kg
Duo - Double head printer - 37.4kg
Mac 10.8 and up
KYOCERA WORKING IN PARTNERSHIP WITH 3D SYSTEMS - FOR MORE INFORMATION ABOUT CubePro™,
PLEASE VISIT www.kyoceradocumentsolutions.co.uk
KYOCERA Document Solutions (UK) Ltd
Eldon Court, 75 - 77 London Road, Reading RG1 5BS
Tel: 0118 931 1500 – Fax: 0118 931 1108
www.kyoceradocumentsolutions.co.uk – [email protected]
">
