Markzware CC Mac, CS6 Mac, CS6 Windows, CS5.5 Mac, CS5.5 Windows, CS5 Mac, CS5 Windows PDF2DTP for InDesign User Guide
Reklaam
Reklaam
PDF2DTP for InDesign User Guide
©2016 Markzware
Q2ID 2015 Table of Contents
PDF2DTP for InDesign
PDF2DTP System Requirements
PDF2DTP for InDesign Mac System Requirements
System Requirements:
• Mac OS X 10.6.8 or higher
• A valid license for Adobe InDesign® CC-2015, CC-2014, CC, CS6, CS5.5 or CS5 - (For CS6 either a boxed or Creative Cloud version will work)
• Internet connection to activate and register PDF2DTP
• Adobe recommended hardware requirements to run your version of InDesign
PDF2DTP for InDesign Win System Requirements
**Links to older versions of PDF2DTP for Windows are included in your subscription, but Markzware is no longer updating or supporting PDF2DTP for Windows. All Windows versions of PDF2DTP are "As Is" products.
System Requirements:
• Win 7 with SP 1 or higher, Win 8 (Win XP Not Supported)
• A valid license for Adobe InDesign® CS6, CS5.5 or CS5 (For CS6 either a boxed or Creative Cloud version will work)
• THERE IS NO PDF2DTP for InDesign CC for Windows. (PDF2DTP for Windows is no longer being developed, but older versions are available for download)
• Internet connection to activate and register PDF2DTP
• Adobe recommended hardware requirements to run your version of InDesign
7/12/16 15:16 ©2016 Markzware
Page 3
PDF2DTP for InDesign
License Agreement
PDF2DTP for InDesign Bundle is a Subscription based license
The PDF2DTP for InDesign Mac-Win Bundle is sold as a subscription based license. This means when your subscription period is complete, all products in the PDF2DTP for InDesign Mac-Win bundle will no longer activate. If you wish to continue using PDF2DTP for InDesign you will need to renew your subscription or purchase a new subscription. This applies to all products in the bundle, including Unsupported products.
While this is sold as a Mac-Win bundle, Markzware is no longer developing or supporting the Windows versions of
PDF2DTP. The Windows downloads available through your subscription are "As-Is" products.
Your Subscription Includes All Updates Free of Charge
Your Subscription Includes All Updates Free of Charge through the end date of your subscription term. Once your subscription has expired, PDF2DTP will no longer activate and you will need to either renew your license or purchase a new subscription.
Some Products in the Bundle are As-Is products and are Unsupported but Available
The PDF2DTP for InDesign Mac-Win Bundle Subscription contains multiple Plug-Ins. Of these Plug-Ins ONLY
PDF2DTP for InDesign CC Mac and PDF2DTP for InDesign CS6 Mac are supported.
The following Plug-Ins are available for download and install as part of the PDF2DTP for InDesign Mac-Win Bundle
Subscription, BUT ARE NOT SUPPORTED: PDF2DTP for InDesign CS6 Windows, PDF2DTP for CS5.5 Mac and
Win, and PDF2DTP for CS5 Mac and Win.
What does **Unsupported mean?
The products listed as **Unsupported, are older products that are available for you to use, but they are no longer being updated. If you encounter an issue with one of these products, you can report it to Markzware Tech support who may be able to help you find a workaround, but no bug fixes or updates will be forthcoming for Unsupported versions.
License Model
This bundle includes several plug-ins. The license model is such that the Plug-Ins are licensed to be used on a single computer. This means for example if you have InDesign CC and CS6 loaded on the same Mac computer you are licensed to run both PDF2DTP for InDesign CC and InDesign CS6 on that Mac.
7/12/16 15:16 ©2016 Markzware
Page 4
PDF2DTP for InDesign
PDF2DTP Quick Start
PDF2DTP Up and Running Quickly
Select Convert PDF… from the PDF2DTP menu
Locate the PDF file
Locate the PDF file you want to convert and then click the Open button.
PDF2DTP Conversion
PDF2DTP will begin converting your PDF file into an InDesign file.
7/12/16 15:16 ©2016 Markzware
Page 5
PDF2DTP for InDesign
Converted PDF
Once the PDF conversion has completed, you will have a new InDesign file. You can now edit this file in the familiar
InDesign environment.
7/12/16 15:16 ©2016 Markzware
Page 6
PDF2DTP for InDesign
Don't forget to Save
Once you are done making your edits and tweaks, don't forget to Save the file.
PDF2DTP for InDesign Preferences
For more control over your PDF conversion or to change the Default Settings, check out the PDF2DTP for
InDesign Menu and Preferences Section of this manual.
That's all there is to it.
7/12/16 15:16 ©2016 Markzware
Page 7
PDF2DTP for InDesign
PDF2DTP for InDesign Installation on Mac
Important Note: This manual describes how to install the latest version of PDF2DTP for InDesign CC Mac. You may also want to use PDF2DTP for InDesign CS6, CS5.5 or CS5. The Installation process for PDF2DTP for
InDesign CS6, CS5.5 and CS5 is the same as for InDesign CC except the Installers are named for the appropriate version of InDesign and where you select to install will need to reflect the version of InDesign you are running.
PDF2DTP For InDesign ZIP File
When you have completed your download of PDF2DTP For InDesign you will have a zip file that needs to be decompressed.
PDF2DTP For InDesign Decompressed ZIP File
On most Macs you can simply double-click on the PDF2DTP For InDesign zip file and this will produce a folder.
Double-click on this folder to reveal the PDF2DTP For InDesign Installer.
If you receive a checksum error when decompressing the ZIP file, use the built in Mac OS ZIP Utility to decompress the ZIP file. This can be accessed by highlighting the ZIP file, then Right-Clicking (or Control-Clicking) the ZIP file.
From the popup menu, select Open With and then select the first item at the top of the list. (For Mac OS X 10.7
and higher this should be called Archive Utility.app).
7/12/16 15:16 ©2016 Markzware
Page 8
PDF2DTP for InDesign
PDF2DTP For InDesign Installer
Double-click on the Setup icon to start the PDF2DTP For InDesign installation process.
Setup Application Can't Be Opened
On many Macs the security settings are set to warn you when trying to run an application downloaded from the internet. You can change these settings on your Mac under the System Preferences/Security & Privacy area.
On many Macs you may see a warning message and the Setup icon bouncing in your Dock or on newer Mac OS
X versions you will see a massage that you cannot open up the Setup CC installer.
If you feel the installation process is stuck, please check your Dock and if the Setup icon is bouncing, click on it to continue with the installation process.
7/12/16 15:16 ©2016 Markzware
Page 9
PDF2DTP for InDesign
Manually Openeing the Setup CC app
If you see a message that Setup CC can't be opened you can manually open it by doing the following:
1. Right-Click or Control-Click on the Setup CC icon
2. From the popup menu select Open
3. On the next window, Click on Open
This should start up the Setup app and bring up the Setup Window
PDF2DTP For InDesign Setup Window
The Setup application has three buttons:
1. Cancel - will Close the Setup application and PDF2DTP For InDesign will not be installed
2. Install - will proceed with the PDF2DTP For InDesign installation
3. Remove - will proceed with removal of existing installations of PDF2DTP For InDesign, which also deactivates PDF2DTP.
7/12/16 15:16 ©2016 Markzware
Page 10
PDF2DTP for InDesign
PDF2DTP For InDesign - Select InDesign Folder Manually if Setup CC cannot auto find InDesign
The Choose a Folder option will only appear if the Setup CC program cannot automatically locate your Adobe
InDesign folder, or you have multiple Adobe InDesign folders. Otherwise when you run the Setup program, you will be asked for your Username and Password as shown in the next step.
PDF2DTP For InDesign - Asking For Password
Installing PDF2DTP For InDesign requires you enter in your Password, as PDF2DTP will be adding items to your
Applications folder. Type in your User Name and Password and then click the OK button.
7/12/16 15:16 ©2016 Markzware
Page 11
PDF2DTP for InDesign
PDF2DTP For InDesign - Installation Complete
Once the PDF2DTP For InDesign Plug-In has been installed you will see a confirmation screen. Click the OK button to close the screen.
You are now ready to start up InDesign and Activate and Register PDF2DTP For InDesign.
7/12/16 15:16 ©2016 Markzware
Page 12
PDF2DTP for InDesign
PDF2DTP for InDesign Installation on Windows
Important Note: This manual describes how to install the latest version of PDF2DTP for InDesign CS6 on
Windows. You may also want to use PDF2DTP for InDesign CS5.5 or InDesign CS5. The Installation process for these versions of PDF2DTP for InDesign is the same as for InDesign CS6 except the Installer is named for the appropriate version of InDesign. Please use this manual as a guide and not as a verbatim step by step guide.
PDF2DTP For InDesign ZIP File
When you have completed your download of PDF2DTP For InDesign you will have a zip file that needs to be decompressed.
IMPORTANT NOTE*** - If you receive a checksum error message when trying to decompress the ZIP file, use
Windows Explorer to decompress the file, instead of a third party ZIP Utility.
PDF2DTP for InDesign Installer Folder
When you decompress the PDF2DTP ZIP file you will wind up with a folder. Double-click the folder to open it.
7/12/16 15:16 ©2016 Markzware
Page 13
PDF2DTP for InDesign
PDF2DTP for InDesign Installer
In the folder you will find the PDF2DTP Installer for InDesign. Double-click on the Installer .exe file to begin the
Installation process.
Important Note: Make sure the folder also contains a file that ends with .mzcert. If the .mzcert file is not present, you will be unable to run PDF2DTP after installation has completed.
PDF2DTP for InDesign Permission or Password
When you first run the PDF2DTP for InDesign installer you may see a User Account Control window (UAC window). This window will differ depending on whether you are logged into an Admin or a Non-Admin account.
Click on the Yes button to continue with the PDF2DTP installation.
7/12/16 15:16 ©2016 Markzware
Page 14
PDF2DTP for InDesign
PDF2DTP for InDesign Welcome Install Screen
Click the Next button to continue with the install.
7/12/16 15:16 ©2016 Markzware
Page 15
PDF2DTP for InDesign
PDF2DTP for InDesign User/Company Name
Your User Name will automatically be filled in based on the name of your computer or account.
For Company Name, type in the name of your Company. If you do not work for a company, you can leave the default of My Company.
Install this application for: - By default "Anyone who uses this computer (all users)" is selected. Unless you want to restrict PDF2DTP for InDesign to just your account, leave the default value for all users enabled.
7/12/16 15:16 ©2016 Markzware
Page 16
PDF2DTP for InDesign
PDF2DTP for InDesign Setup Type
Unless instructed by Markzware Tech Support, you should select the Complete install type.
7/12/16 15:16 ©2016 Markzware
Page 17
PDF2DTP for InDesign
PDF2DTP for InDesign Review
The installer will present a Review window that will show you where the PDF2DTP for InDesign Plug-In will be installed.
7/12/16 15:16 ©2016 Markzware
Page 18
PDF2DTP for InDesign
PDF2DTP for InDesign Installation Complete
Click the Finish button to close the PDF2DTP for InDesign Installer.
7/12/16 15:16 ©2016 Markzware
Page 19
PDF2DTP for InDesign
PDF2DTP Successful Activation
Start Up InDesign
After you have installed PDF2DTP for InDesign, start up InDesign
7/12/16 15:16 ©2016 Markzware
Page 20
PDF2DTP for InDesign
PDF2DTP for InDesign - Attempting to Activate
The very first time you start up InDesign after installing PDF2DTP, the Plug-In will attempt to contact Markzware's
License Server and activate your product. This should be a fairly transparent process, but may take a few minutes.
If the Plug-In is able to contact the License Server, you will be activated. First you will see an Attempting to
activate screen. This screen can be present for up to several minutes, so please be patient. You can click the
Close button to dismiss the screen and if the PDF2DTP Plug-In is able to successfully activate you will see the screen shown in the next step once activation has completed.
7/12/16 15:16 ©2016 Markzware
Page 21
PDF2DTP for InDesign
PDF2DTP for InDesign - Successful Activation
If PDF2DTP can successfully activate, you will see the Activation complete screen. Click the Close button to dismiss this screen and start using PDF2DTP. At this time you should also have the PDF2DTP for InDesign
Registration Screen visible. Please fill out the Registration form before starting to use PDF2DTP for InDesign.
Should you have any issues we have provided links on the Activation Complete screen to contact Markzware Tech
Support .
7/12/16 15:16 ©2016 Markzware
Page 22
PDF2DTP for InDesign
PDF2DTP Failed Activation
If you see the application is not activated screen, this is a reminder to Activate your product. If for any reason
PDF2DTP for InDesign was unable to reach our License Server, you can still run the product for a limited time, but every time you start up InDesign you will be presented with the application is not activated screen reminding you to take action by the specified date.
VERY IMPORTANT!!!--- If you do not Activate PDF2DTP for InDesign by the date listed on your screen, YOU
MAY LOSE YOUR LICENSE
If you continuously see this window, you need to contact Markzware Tech Support and get this issue cleared up.
Otherwise after the specified date, your license will be disabled. The grace period to activate is long enough and the reminders should be annoying enough that you will take action and contact Markzware before the expiration date arrives.
7/12/16 15:16 ©2016 Markzware
Page 23
PDF2DTP for InDesign
PDF2DTP for InDesign Proxy Setup for Mac & Win
If you are unable to connect to the internet due to a proxy server, PDF2DTP has some built in features that might help. Important Note: While the screen shots in this section show access to Proxy settings on a Mac, the same screens will appear on Windows versions of PDF2DTP for InDesign. Please use this section as a guide as there may be differences in the look and feel of screens due to operating system differences and the version of
PDF2DTP for InDesign you are using. If you are running PDF2DTP for InDesign CS6, the product name on the
Failed Activation window will show PDF2DTP for InDesign CS6.
PDF2DTP for InDesign Accessing Proxy settings
Access the proxy settings by clicking on the word here
7/12/16 15:16 ©2016 Markzware
Page 24
PDF2DTP for InDesign
PDF2DTP for InDesign Enter Proxy Information
You may need to contact your IT or Support person to obtain proper information for proxy setup.
Once you enter the requested information, click on the Save button and then click on the Close button.
7/12/16 15:16 ©2016 Markzware
Page 25
PDF2DTP for InDesign
PDF2DTP for InDesign Successful Activation
If the proxy data you entered allows you to contact the Markzware License Server, you will eventually see a successful activation screen.
If you do not get a successful activation screen, please first check that you have entered in the correct Proxy Server data. If after re-checking your proxy data entries, you still cannot activate, please contact Markzware Technical
Support .
7/12/16 15:16 ©2016 Markzware
Page 26
PDF2DTP for InDesign
PDF2DTP for InDesign Registration
Why should you register your software?
1. If you are not Registered you may be denied Tech Support as we do not know who you are.
2. If you are not Registered and we run any special promo deals for PDF2DTP for InDesign users, you will not qualify as we will have no contact info for you.
Important Note: While the screen shots in this section show the Registration screens on a Mac, the same screens will appear on Windows versions of PDF2DTP for InDesign. Please use this section as a guide as there may be differences in the look and feel of screens due to operating system differences and the version of PDF2DTP for
InDesign you are registering. For example, if you are running PDF2DTP for InDesign CS6, the product name on the
Registration window will show PDF2DTP for InDesign CS6.
PDF2DTP for InDesign Registration Screen
Please register your version of PDF2DTP for InDesign.
7/12/16 15:16 ©2016 Markzware
Page 27
PDF2DTP for InDesign
PDF2DTP for InDesign Registration Required Field
Although your email address is the only required field to register PDF2DTP for InDesign, it is strongly suggested you at least provide your Name and a phone number as well.
7/12/16 15:16 ©2016 Markzware
Page 28
PDF2DTP for InDesign
PDF2DTP for InDesign Thank You For Registering
Once you have successfully submitted your PDF2DTP for InDesign Registration form you will receive a Thank You screen. Click the Close button to dismiss this screen. At this point you are ready to start using PDF2DTP.
7/12/16 15:16 ©2016 Markzware
Page 29
PDF2DTP for InDesign
PDF2DTP for InDesign Mac Deactivation & Removal
While this section shows how to deactivate and remove PDF2DTP for InDesign CC Mac, the same general steps apply to PDF2DTP for InDesign CS6, CS5.5 and CS5 for Mac. The name of the Setup file to double-click on will reflect the version of InDesign you are running.
PDF2DTP for InDesign Mac Deactivation - Run Installer
To begin the deactivation process, run the PDF2DTP for InDesign Installer by double-clicking on the Setup CC icon. This is the same installer you used when first installing PDF2DTP for InDesign. If you do not have your installer available, you may re-download it from the link that came with your original order.
PDF2DTP for InDesign Mac Deactivation - Click Remove
Click the Remove button to begin the Uninstall/Deactivation process.
7/12/16 15:16 ©2016 Markzware
Page 30
PDF2DTP for InDesign
PDF2DTP for InDesign Mac Deactivation - Enter your Password
If you are logged in as an Admin you will be asked to enter your Admin name and password. If you are logged into a non-admin account, you will still be prompted to enter an Admin username and password in order to proceed.
PDF2DTP for InDesign Mac Removal and Deactivation complete
Once PDF2DTP for InDesign has been removed/deactivated, you will see a confirmation screen. Click OK to close the window.
PDF2DTP for InDesign Mac has now been removed and deactivated. You may now load PDF2DTP for InDesign onto another Mac computer.
7/12/16 15:16 ©2016 Markzware
Page 31
PDF2DTP for InDesign
PDF2DTP for InDesign Win Deactivation & Removal
In order to Deactivate your license for PDF2DTP on Windows, you must Uninstall the Plug-In.
While this section shows how to deactivate and remove PDF2DTP for InDesign CS6 Win, the same general steps apply to PDF2DTP for InDesign CS5.5 and CS5 for Win as well. The name of the PDF2DTP Plug-In to uninstall will differ with each version of InDesign.
PDF2DTP for InDesign Win Uninstall
To Uninstall and Deactivate PDF2DTP for Windows, go to your Control Panel and click on Uninstall a program
7/12/16 15:16 ©2016 Markzware
Page 32
PDF2DTP for InDesign
PDF2DTP for InDesign Win Uninstall - Select PDF2DTP
To Uninstall and Deactivate PDF2DTP:
1. Highlight PDF2DTP in the list of available programs to Uninstall
2. Click on the Uninstall link
PDF2DTP for InDesign Win Uninstall - Remove PDF2DTP?
Click the Yes button to continue with the removal and deactivation of PDF2DTP.
7/12/16 15:16 ©2016 Markzware
Page 33
PDF2DTP for InDesign
PDF2DTP for InDesign Win Uninstall Complete
Once the Uninstall/Deactivation process is complete you will see a confirmation window. Click the Finish button to close the window and complete the removal and deactivation of PDF2DTP.
PDF2DTP has now been deactivated and removed and may now be installed on another Windows computer.
7/12/16 15:16 ©2016 Markzware
Page 34
PDF2DTP for InDesign
PDF2DTP Menu & Preferences
The PDF2DTP for InDesign Menu
Once PDF2DTP for InDesign has been properly installed and activated you will see a new menu in InDesign called
Markzware. Under the Markzware menu you will see the PDF2DTP for InDesign menu. Following is an overview of each menu item:
1. Convert PDF… - allows you to select and convert a PDF file. All pages in the PDF file will be converted.
The settings used will be the currently set values under the Preferences area.
2. Convert Page Range… - allows you to select a PDF file to convert, but it also allows you to specify a range of pages to convert. The settings used will be the currently set values under the Preferences area
3. Preferences… - will bring up the PDF2DTP for InDesign Preferences window where you can set certain parameters and options for the conversion of PDF files
4. Help… - will bring up a help/about window
7/12/16 15:16 ©2016 Markzware
Page 35
PDF2DTP for InDesign
PDF2DTP for InDesign Help… Menu Item
When you select the Help… menu item you will be presented with a small window that contains several things:
1. The version number of PDF2DTP for InDesign you are running. This version will be asked for should you contact Tech Support.
2. Link to the PDF2DTP for InDesign online manual. Clicking this will open up your default web browser and take you to the online PDF2DTP for InDesign manual.
3. Link to the Markzware Tech Support Request Form. Clicking on this will open up your default web browser and take you to the Markzware Online Technical Support Form. The form should have your License ID prepasted in to save you some time.
***Note - A PDF version of this PDF2DTP for InDesign manual is included as part of your initial download.
PDF2DTP for InDesign General Preferences
1. Select the “Show Preferences Before Converting” checkbox in order to display the Preferences window prior to the conversion process. If this feature is disabed, PDF2DTP will use the last settings to convert your files until you manually change your preferences. To view the Preferences window at any time - Go the to Markzware->PDF2DTP menu and select Preferences…
2. Select the “Convert Page Range” checkbox to convert a selected range of pages. When the preference is enabled, you will be prompted for the start and ending page numbers you wish to convert.
7/12/16 15:16 ©2016 Markzware
Page 36
PDF2DTP for InDesign
PDF2DTP for InDesign Document Settings
1. Select the “Save Document” checkbox to automatically save your new document to the designated folder upon completion of the conversion.
2. Save To - This area allows you to select the destination folder of your InDesign file and Images. By default this is in your Users->Documents->PDF2DTP->PDF2InDesign folder. If you wish to save your converted file elsewhere, you can select "PDF Folder", which will save the InDesign file and in the same folder as the original PDF, or you can select a custom destination by selecting "Other folder" and then selecting the destination of your choice.
3. Select "Overwrite Existing Folder" to overwrite an existing file conversion. If this is unchecked, everytime you convert a file PDF2DTP will create a new job folder. If you wish to have different versions of a converted PDF file, then you should leave this unchecked. If you would like future conversions to overwrite older conversions of the same job, then your should check this box. **Note - when this is unchecked, it can increase the amount of hard disk space required to convert the same job repeatedly.
4. This are shows the path where you InDesign file will be saved. This is a nice visual confirmation of where things will be saved.
7/12/16 15:16 ©2016 Markzware
Page 37
PDF2DTP for InDesign
PDF2DTP for InDesign Text Settings
1. Select the "Substitute Missing Fonts" checkbox to substitute missing fonts with the application’s default font. Leave this item unchecked if you eventually plan on locating and activating missing fonts. You can set the application default font by editing the style when no documents are open in InDesign. When the conversion is complete the application will display a list of missing fonts at which time you can change fonts as desired, or you can edit character and paragraph styles. Note that switching fonts may cause a different or undesirable text flow. This is due to the fact that the calculations for the text attributes are based on the info contained in the PDF for the original fonts.
2. Select the “Scale Text” checkbox to scale the text using a substituted font (usually horizontally) so that characters closely match their original positions.
3. Select the "CharStyles"checkbox to add Character Styles to your application. This will allow you to easily make global changes to your text. These CharStyles are created by PDF2DTP. Any CharStyles in the original document are lost when a PDF is created.
4. Select the "ParaStyles" checkbox to add Paragraph Styles to your application which will likewise allow you to make global changes to your text. These ParaStyles are created by PDF2DTP. Any ParaStyles in the original document are lost when a PDF is created.
5. When "Page Numbering" is selected, PDF2DTP will look for small text boxes with text equal to a Page
Number and will then replace the text in the box with InDesign's AutoPage Marker. This might make editing the document easier, as you can now rearrange pages without having to manually renumber them. **NOTE
- Using this feature on a document with a large number of pages, may substantially increase the time it takes to convert your file.
6. Select “Replace Unknown Characters With '~'" to replace unknown font and unicode values with a ~. If this is unchecked and PDF2DTP cannot determine the proper glyph for a character, that character will be replaced with a space. (The ~ may be easier to spot when proofing the file).
7/12/16 15:16 ©2016 Markzware
Page 38
PDF2DTP for InDesign
PDF2DTP for InDesign Images Settings
1. Select the “Save Image Previews” checkbox to save the image previews in the PDF to the conversion folder, otherwise the previews will have no link (similar to a pasted PICT). Since these images have no known pathname they will be given names such as “Image09-p03.tif” (where the last number is the page number on which the picture box resides).
2. Select the “Reuse Duplicates” checkbox to save only one image preview file if there are any duplicates in which case each occurrence of the preview in the document will use the same file. This preference is useful because it can speed up the conversion process especially when the same large preview is used on multiple pages. The file name will be formed by using the page number of the first occurrence of the preview in the document with a plus sign (“+”) appended to the preview file name.
3. Select the “Clipping Paths” checkbox to save the Clipping Path in the preview file.
4. Select the “ICC Profiles” checkbox to save an ICC Profile, if defined in the PDF, to the preview file.
5. Select the “Duotones EPS” checkbox to save the image preview to a Duotone EPS if the color space is defined as DeviceN and uses named Spot colors (i.e. “PANTONE 123 C”).
6. Select the “Save Missing Images (OPI)” checkbox to create a file in the conversion folder for a missing image which has a known name. This allows you to eventually update the images upon locating the originals.
7. "Unlink Images" is related to the Save Image Previews and the Save Missing Images (OPI) preferences.
If a PDF contains an image path (i.e., OPI data) and PDF2DTP can locate that image, it will link to it. If no
OPI data is present in the PDF, or the image pointed to by OPI data cannot be found, then, if Save Image
Previews is unchecked, the image will be listed with a Status of No Disk File under the Links window. If
Save Image Previews is checked, then PDF2DTP will attempt to create a preview image and name it using the following format: Image01-p01.tif, where Image01 represents the number of the image on a page and p01 represents the page in the document where the image is located.
7/12/16 15:16 ©2016 Markzware
Page 39
PDF2DTP for InDesign
PDF2DTP for InDesign Objects Settings
1. Selecting "Chain Text Boxes" instructs PDF2DTP to automatically connect similar sized text boxes into a single chained story. **NOTE - Using this feature may cause text reflow which in many cases can be adjusted by manually resizing certain text boxes in the chained flow or adjusting font size or tracking.
2. When "Tables" is selected, PDF2DTP will attempt to create a true table object based on text boxes and their surrounding lines. If PDF2DTP is unable to create a true table, text boxes and lines will remain as separate objects.
3. Select "Groups" to instruct PDF2DTP to attempt to combine objects it thinks are a group within the PDF.
This can allow faster screen refreshes after conversion.
4. Select "Hyperlinks" to instruct PDF2DTP to convert data for hyperlinks.
5. Select "Bookmarks" to instruct PDF2DTP to convert data for Bookmarks, this can include Table of
Contens for PDFs created from InDesign files.
6. "Include Pasteboard Items and Reg. Marks" instructs PDF2DTP to convert items outside the page area.
This can include printer marks and other items found on the pasteboard.
7. If your PDF contains a lot of small vector object and is sluggish to edit due to screen redraw being slow, selecting "Replace "Marked Content"" and setting an object count will instruct PDF2DTP to skip objects that exceed the specified count and instead replace the entire object with a gray placeholder box. At a later time you can then locate and place the original drawing back into the file.
7/12/16 15:16 ©2016 Markzware
Page 40
PDF2DTP for InDesign
PDF2DTP Conversion Notes
PDF (Portable Document Format) is an open standard for document exchange. This file format created by Adobe
Systems in 1993 is used for representing documents in a manner independent of application software, hardware, and operating systems. Each PDF file encapsulates a complete description of a fixed-layout flat document, including the text, fonts, graphics, and other information needed to display it.
PDF2DTP for InDesign is an extremely valuable utility that converts a PDF to an editable application document. If for example you discover you have lost your original document but only have a PDF you can convert the PDF back into a document thus saving a lot of time it would otherwise take to re-create the document from scratch by hand.
However, a conversion may not reproduce the original document 100% and there are several limitations of which you need to be aware of (See the full list later in this manual).
It helps to always think of a PDF as a “drawing” and that because the conversion process is quite complex the software sometimes needs to make an “educated guess” where the end-result may not be a completely satisfactory conversion. In other words you will no doubt need to make some manual changes to compensate. By a “drawing” we mean a PDF contains specific information in order to render the fonts and images on the computer screen, or to print the PDF. For example, a PDF can contain certain “glyphs” which are comprised of drawing commands which enable the data to be drawn or printed, but the original TEXT characters may not be defined within the PDF and so a conversion to an actual story may not even be possible.
A PDF often contains embedded fonts so that it can be displayed or printed on any platform. However, if the fonts are missing (or not activated at the time) then the document created by the conversion will have limitations or text flow problems.
A PDF also often contains images but the links to the original file path may not be known. The images may also be down-sampled (lower resolution) and this poses a problem if you intend to create a document and wish to use the original hi-res images.
Therefore, the actual goal isn’t necessarily to obtain a 100% conversion back to the original document, but instead to allow someone to recover a lost document or access content in a lost document. PDF2DTP is also very handy for doing quick edits to a PDF in a familiar InDesign environment.
If you do run into some problems, please feel free to contact Markzware Technical support so that we can learn how to improve and provide the best conversion solutions for you.
PDF2DTP for InDesign - ParaStyle and CharStyle
If the “ParaStyle” or “CharStyle” Preferences are selected then for each major text attribute change a Paragraph or
Character Style will be conveniently added to the document. This allows you to easily make global changes to the text by simply editing the Style.
Important Note! --- PDF files do not carry any style names defined in the original document used to create the
PDF. PDF2DTP creates its own Para and Char Styles based on what it detects during conversion. So if you have a series of style names you always use, these will not appear in the converted file. What you may be able to do is rename the Para or Char styles PDF2DTP created during conversion to match the style names in your original document.
7/12/16 15:16 ©2016 Markzware
Page 41
PDF2DTP for InDesign
PDF2DTP for InDesign - ParaStyle and CharStyle Names
The Paragraph Style name will include settings such as Leading and Indents while the Character Style name will include the name of the font and the point size.
PDF2DTP for InDesign - The "+"
Note that some Character or Paragraph Styles will have a plus sign “+” in front or at the end of their names on the
Styles palette indicating the selected text has local formatting changes that deviate from the Style settings. In this case you can option-click the Style to override the formatting and apply the exact attributes of the Style.
PDF2DTP for InDesign - How PDFs Render Text
It’s important to understand how a PDF renders text. The PDF contains various commands to move to a location and draw a character. The PDF also contains the width of the character so that it can know where to draw the next character. However, a space character is often absent from the text stream. In this case, after a word has been drawn, the next command will be to move a short distance further to the right to draw the character that begins the next word. A problem arises in determining what to do with this “gap” in the text drawings. PDF2DTP performs several calculations in order to come up with the best estimate on how to handle the “gap”, such as to insert a
Space character, or to apply tracking (a form of letter-spacing) or to insert a Tab if the spatial distance is fairly great.
PDF2DTP for InDesign - Underlined Text
There can be problems with text that was underlined in the original document. The PDF will draw a word and then draw a line underneath. PDF2DTP attempts to detect this situation and if discovered will apply the Underline attribute to the text. Otherwise a line object will be created. Note that Underlines are set using the default line offset and width. A Character Style for the Underline will be conveniently created so that the settings can be easily changed.
PDF2DTP for InDesign - Text Box Boundaries
A text box is the calculated boundary for a group of lines of text. PDF2DTP works by calculating the ending positions for a series of related lines that will determine the rectangle that can be formed to fully encompass the group of lines. The text box will then be used to determine various paragraph attributes such as Justifications and
Indents. In some cases PDF2DTP makes a determination that a specific line of text may not relate very well to previous lines in which case a new text box will be started.
PDF2DTP for InDesign - Text Flow
Text “flow” is another major problem for a conversion, especially when a referenced font is missing. In some cases the text will not break as desired on each line, thus causing the last part of the story to overflow the box at the bottom. In this case, a common remedy is to simply widen the text box manually to see if you can get the text to flow better.
7/12/16 15:16 ©2016 Markzware
Page 42
PDF2DTP for InDesign
PDF2DTP for InDesign - Down sampled Images
Images can often pose a major problem when considering a goal of attempting to convert the PDF back to the same level of quality as the original document. In many cases the PDF was generated where images have been down-sampled to a lower resolution, thus making it physically impossible to reach the goal of a flawless, exact duplicate of the original document.
The example shown is a PDF file created using QuarkXPress where the original placed images were 305dpi. Two
PDF files were created out of QuarkXPress one using the Press Quality settings and one using the Low Quality settings. As you can see PDF2DTP can only extract the quality of image that was originally set when the PDF file was created.
7/12/16 15:16 ©2016 Markzware
Page 43
PDF2DTP for InDesign
PDF2DTP for InDesign - OPI
It is important to understand a term known as “OPI” which stands for “Open Prepress Interface”. This is where a low-resolution image is placed on the document page as a “placement holder” for a higher resolution image stored in a known location. The hi-res image, which is of course a much larger file, will be located and used in place of the lo-res picture at print time. If an image in the PDF is available on disk then a link to it will be created. If a PDF was generated with no OPI comments then the original image name and location will of course be unknown. If you choose “Save Missing Images” from the PDF2DTP Preferences a preview file will be conveniently created using the original name.
PDF2DTP for InDesign - Found Links
If the link to the original image is known, PDF2DTP will import the file. If the image cannot be located then it will convert the lo-res picture preview stored in the PDF. A problem arises due to the fact that the preview is comprised of only those pixels that are viewable within the picture box. If you were to locate and import the original image then its offset in the picture box may change if the image dimensions are greater than the picture box.
PDF2DTP for InDesign - Standard OPI Disabled at PDF Creation Time
Most PDFs are generated by an application where the Export PDF “Use OPI” setting is not turned on in which case the PDF will not contain a name for the image. The link to the path location of the original image is therefore unknown.
PDF2DTP for InDesign - Clipping Paths
If the original image exists it will be imported and the application will use the default Clipping Path for the image (if one exists). If the image is missing, or no link exists, you can add a Clipping Path to the created preview file by selecting the PDF2DTP “Clipping Paths” Preference.
If a conversion reveals a picture box where the image is not being shown properly, for example is only partially displayed, the first trick to try is to examine the Clipping Path. This can be done in the application by either editing the points of the path or by deleting the path altogether.
7/12/16 15:16 ©2016 Markzware
Page 44
PDF2DTP for InDesign
PDF2DTP for InDesign - Color Conversion Tips
Colors are converted based on their definitions in the PDF. Some colors may not look the same as when the PDF is displayed by a viewer or the colors may not be exactly equal to the colors used by the original document. This can occur for several reasons. When a PDF is generated from a document, the application will use specific PDF Output settings which may cause color conversions, such as CMYK to RGB.
It is important to understand the effects of using an application’s Export PDF settings if you have the intention of ever wanting to convert the PDF in the future back to the same quality as the original document. Just as colors can be altered, images can be downsized to a lower resolution making it impossible to convert the preview to match the original image quality. If fonts are embedded then this too can become a huge issue if the original fonts cannot be located and activated. Therefore, it is often a good idea to learn how to Export a PDF not only for the desired destination, such as a printing device, computer screen or to display in a web browser, but also to create a high quality PDF that can be used for a much more precise conversion back to a document. The additional high quality
PDF can serve as a “backup” of your document in case you ever lose it whereas having only a low quality PDF may result in conversion issues due to the limitations dictated by the original Export settings.
PDF2DTP for InDesign - Spot Colors
If the PDF defines a color by name (called a “Spot” color) then PDF2DTP will add the color to the document’s Color palette based on the closest color model supported according to the color’s name. The most common color models are all supported, including ANPA, DIC, FOCOLTONE, HKS, PANTONE, TOYO, TRUMATCH, etc.
It is possible that a Pantone color, for example, defined by the original application that created the PDF may not have the exact same color values as the application using the PDF2DTP Plug-In even though they use the same color name.
If a PDF does not contain named colors then this means it was generated by an application which had PDF Output preferences set to export all colors to RGB or CMYK. Even though the original document may have used Spot colors, a PDF created using only CMYK will of course not contain any named Spot colors
PDF2DTP for InDesign - Process Colors
The naming convention for Process colors (which have no names defined in the PDF) are dependent upon the application. Some applications handle Process colors using percentages from 0% to 100% for the RGB or CMYK channels whereas other applications may use numerical values 0 to 255.
7/12/16 15:16 ©2016 Markzware
Page 45
PDF2DTP for InDesign
PDF2DTP for InDesign - Fill and Frame
In desktop publishing applications you can create a tint box with a fill and frame as one single object. However,
PDF2DTP currently will create separate objects: one for the fill and another for the line around the edges of the box.
In the sample shown, the frames were intentionally moved out of place on the converted PDF to show that the frames are separate from the fills.
PDF2DTP for InDesign - Blends
A PDF sometimes defines a Blend as a series of lines that are drawn with changing colors. Because this would cause too many line objects to be created, PDF2DTP will examine the lines to determine if a simple Blend can be used for the box with the Starting and Ending colors.
7/12/16 15:16 ©2016 Markzware
Page 46
PDF2DTP for InDesign
PDF2DTP for InDesign - Table Conversion Tips
A “table” consists of drawing commands defined in the PDF that will first display the text followed by lines to form the cells. If the “Table” preference is turned on, PDF2DTP will attempt to examine the objects in order to create a true table object. Otherwise, if the “Table” preference is turned off then the text and lines will be converted as separate objects.
In the following sample, a true table was created when the PDF (which was originally created in InDesign) was converted into an InDesign document.
If you try converting a file and it hangs or crashes, try it again but this time disable the Table Preference. In many cases your file may convert, but will not contain actual tables.
PDF2DTP for InDesign - Drop Shadow As An Image
A Drop Shadow is sometimes defined in a PDF as an image in which case it is not possible to determine that it is really supposed to be a Drop Shadow. In these cases the drop shadow will be converted as an image.
PDF2DTP for InDesign - Drop Shadow and Missing Font
Text which has a Drop Shadow can pose a problem especially if the font is missing because the text characters will not correctly match the positions of the individual shadows.
PDF2DTP For InDesign - Trim Size
The document size of the converted PDF will be based on what is called the “Trim” area as defined by the PDF.
This may be different than the dimensions displayed by a PDF viewer that uses the CropBox area.
PDF2DTP For InDesign - Media Size
A PDF may define a “Media” area which consists of a larger size which will contain various markings such registration targets and slugs. Typically you can direct PDF2DTP to ignore these objects by turning off “Include
Pasteboard Items” in the Preferences.
7/12/16 15:16 ©2016 Markzware
Page 47
PDF2DTP for InDesign
PDF2DTP For InDesign - Bleed
A PDF may define a “Bleed” area which is slightly larger than the page size.
PDF2DTP For InDesign - Bad PDFs
Sometimes a PDF can become corrupted and cannot be displayed in a PDF viewer. In this case try using
PDF2DTP for it has built-in routines that will attempt to salvage the document as much as possible. Although this is not PDF2DTP's main feature, it may come in handy in certain cases. Salvaging a document usually involves skipping things during conversion, so the converted document almost always has missing items under these circumstances.
PDF2DTP For InDesign - Subpar Conversion Results
If a PDF does not convert very well, especially if the PDF was created many years ago, try opening it and re-saving it in a PDF editor, such as Acrobat, and retry the conversion. Most PDF editors have the capability of repairing or improving the PDF, or perhaps allowing you to save to a higher version.
PDF2DTP For InDesign - Printers Marks
If you see Printers Marks such as fold and trim marks, try disabling the Include Pasteboard Items Preference.
This will not convert any items outside the trim area.
PDF2DTP for InDesign - Missing Fonts
Missing fonts (fonts which are not active when performing a conversion) pose the biggest problems. Calculations for text positions are based on information (such as character widths) provided by the PDF according to the original fonts and therefore text may flow undesirably until the fonts are located and activated.
7/12/16 15:16 ©2016 Markzware
Page 48
PDF2DTP for InDesign
PDF2DTP for InDesign - Unknown Character or Glyph
If for some reason a character used in the PDF cannot be converted it will be substituted with a question mark (“?”).
In this case you will need to locate and activate the original font and retry the conversion. For example, a Type0 font embedded in the PDF contains drawing commands in order to display little “images”, such as a bar code, but the specific Unicode values may be unknown and it is therefore impossible to obtain the TEXT.
When question marks appear, an interesting test you can perform is to open the PDF in an Editor, such as Acrobat, and copy and paste the text into a Text Editor to see if “garbage” is displayed. This would be proof that it is physically impossible to convert the drawing commands into Unicode values (that is to say without using sophisticated OCR algorithms.)
PDF2DTP for InDesign - Substitute Missing Fonts Enabled
If you turn on the “Substitute Missing Fonts” preference then missing (inactive) fonts will be substituted with the application’s default font (commonly Minion Pro, Times, Arial or Helvetica, etc.) The actual font will be based on the
“Normal” character style which can be changed manually to a different default replacement font (usually by editing the style sheet when no documents are open, or by changing the application’s font substitution preferences). Using the substitute active font may often result in a more desirable text flow, especially when combined with the “Scale
Text” Preference.
Important Note*** - Based on in-house testing, enabling the Scale Text option dramatically increases the time it
takes a conversion to complete. You may want to consider using this option on a range of pages instead of entire documents, especially if the document is long and has many text styles used in it.
PDF2DTP for InDesign - Substitute Missing Fonts Disabled
When the conversion is complete the application may display a list of missing fonts at which time you can change them as desired, or you can edit the style sheets at any time in the future.
7/12/16 15:16 ©2016 Markzware
Page 49
PDF2DTP for InDesign
PDF2DTP for InDesign Known Limitations
PDF2DTP for InDesign and Embedded Fonts in PDF Files
An embedded font poses a problem where the information in the PDF will be sufficient to draw the glyphs
(characters), but there may be no equivalent Unicode character values given, thus making a conversion to TEXT impossible In these cases you will question marks {?) displayed instead of actual text.
PDF2DTP for InDesign and Document Page Size
The resulting converted document page size will be based on the Trim area with all registration marks positioned outside the page boundary.
PDF2DTP for InDesign and Line Styles
Some Line Styles, such as Triple, are not supported and will convert as separate lines.
PDF2DTP for InDesign and Underlines
Underlines are set using the default line offset and width.
PDF2DTP for InDesign and Colors Used in PDF Files
Colors are converted based on their definition in the PDF. Some colors may not look the same on screen as the original PDF colors.
PDF2DTP for InDesign and OPI Comments
If an image in the PDF is available on disk a link will be created. If a PDF was generated with no OPI comments then the original image name and location will of course be unknown. In this case choose “Save Missing Images” from the Preferences to create a preview file.
PDF2DTP for InDesign and No Defined Image Path
When an image has no path defined in the PDF the preview data saved inside the PDF is only for the viewable area, which could be a mere sliver of the original image. The preview created by PDF2DTP for InDesign will accommodate this problem by generating a large image file in order to better replace the image and retain the offsets once the original image is found.
7/12/16 15:16 ©2016 Markzware
Page 50
Laadi alla
Avalik link on uuendatud
Teie vestluse avalik link on uuendatud. You may view and manage your chat links after registration here.
Dokumendi avalik link
Reklaam