Ayrstone AyrMesh
Router Setup
TM
Quickstart Guide
Ayrstone.com
www.Ayrstone.com
888-837-0637
1
1
Start Here
Quickstart Guide-
Check the contents of the box:
• Router
• Antenna
• Ethernet Cable
• Power Supply
Visit Ayrstone.com/support for detailed instructions, videos, slide shows, and a troubleshooting guide.
scan with mobile device www.Ayrstone.com/support
2
Gather
What You’ll Need
• Router and Included Parts
• An Additional Ethernet Cable
• Computer with an Ethernet Port
• Always on Internet Connection
DSL, Cable, Satellite, etc. (not dial-up)
You may also want:
• One or more AyrMesh Hubs
• Additional Ethernet Cables
3
Assemble
Router and Antenna
• Screw Antenna finger-tight
(pic.3) onto the Antenna Connector on the back of the Router.
(pic.2)
• Do Not Use Tools.
(pic.2)
4
Connect
Computer to Router
•Plug one end of an Ethernet
Cable into one of the 4 LAN ports on the back of the
Router.
(pic.4)
•Plug the other end of the
Ethernet Cable into the ethernet port on your computer.
(pic.5)
(pic.3)
5
Connect
Router to Power Supply
• Plug one end of an Ethernet
Cable into the WAN port on the back of the Router.
(pic.6)
• Plug the other end of the Ether- net Cable into the plug on the
Power Supply.
(pic.7)
• Plug Power Supply into wall.
(pic.8)
(pic.4) (pic.6)
(pic.8)
(pic.5)
(pic.7)
6
Login To
Ayrmesh Router
• Start an Internet Browser
Internet Explorer, Firefox, Safari, Chrome, etc.
• On the URL Line type: 10.0.0.1
• Press: Enter on your keyboard
• Login Page will show on screen.
(pic.9)
• Enter Username: ayrmesh
• Enter Password: ayrmesh
• Press: Login or Enter on your keyboard
7
Set Up
Internet Connection
• Router page will show on screen.
(pic.10)
• Press: Click HERE to set up your router.
(pic.10)
• Setup Internet Connection page will show on screen.
(pic.11)
• Select: Your Internet Connection
DHCP, PPPoE or Static
(pic.9)
If the Login page does not appear on your screen, follow the Ayrmesh Router Troubleshooting Guide.
7
Continued
7
Continued
(pic.11)
• Follow instructions for your internet connection.
DHCP
STATIC
• Enter PPP User Name and
Password.
(pic.13)
Provided by Internet Provider.
• Does your ISP require encryption?
(pic.13)
No: Do Not check encrytion box.
Yes: Check encrytion box. (This is rare)
• Click Next.
(pic.13)
• WiFi Access page will appear on screen. Go to step 8.
(pic.12)
• Click Next.
(pic.12)
• WiFi Access page will appear on screen. Go to step 8.
PPPoE
(pic.14)
• Enter IP address, netmask and gateway IP address.
(pic.14)
Provided by Internet Provider.
• Click Next.
(pic.14)
• WiFi Access page will appear on screen. Go to step 8.
(pic.13)
8
Set Up
WiFi Access Point
Choose: One of three options.
1.) If your AyrMesh hub provides good Wifi through out your house.
•Select: Turn off Router’s wireless access point
• Click Next.
• Go to Step 9.
2.) If you do not have an AyrMesh Hub, or If your
AyrMesh Hub is not usable throughout your house.
(e.g. Hub is above a metal roof)
• Select: Use SSID and WPA passkey from ayrmesh.com
• Click Next.
• Go to Step 9.
8
Continued
3.) If you want a separate WiFi signal from your Router, and if your AyrMesh hub provides good Wifi throughout your house.
•Select: Configure Router’s wireless access point as follows:
• Fill in SSID
(Name of the network. Different from your
AyrMesh SSID.)
• Select Encryption type.
Select WPA2-AES if supported by all devices.
Select WPA-TKIP if you have older devices.
• Fill in Encryption Password.
Ensure you can remember it and keep it a secret.
• Fill in the Channel.
Use a channel that is at least 5 away from your
Hub’s channel. e.g. Hub is on channel 6, Router can be set to channel 1 (default).
• Click Next.
• Go to Step 9.
9
Final Steps
• Router will reboot.
Takes about one minute.
• Login Page will show on screen.
(pic.9)
If you get a timeout message click the browser’s refresh button.
• Connect: Short Ethernet cable attached to the
Power Supply to your Internet connection device.
(pic.15)
Modem, Radio or Primary Router
• Test Internet connection.
Connection is Good: Go to Step 10
Unable to Connect:
See the Ayrmesh Router Troubleshooting Guide.
Connecting to an “all-in-one” router/gateway device?
Put AyrMesh into the DMZ of the device:
Visit http://ayrstone.com/support for examples.
Contact your ISP for detailed instructions.
10
(pic.15)
• Fill in the Sign up Page
( Be sure to supply a working email address.)
On Ayrmesh.com, you can monitor and control your Ayrmesh network.
Note: Once you set up your router it will appear on your front page.
(pic.15)
Login to
Ayrmesh.com
• Start an Internet Browser
Internet Explorer, Firefox, Safari, Chrome, etc.
• On the URL Line type: Ayrmesh.com
• If you have an Ayrmesh account:
Log In.
• If you do not have an Ayrmesh account:
Ayrstone AyrMesh
Router Setup
Troubleshooting Guide
Ayrstone.com
www.Ayrstone.com
888-837-0637
1
1
Start Here
Troubleshooting
Guide-
AyrMesh Router
Visit Ayrstone.com/support for detailed instructions, videos, slide shows, and a troubleshooting guide.
scan with mobile device www.Ayrstone.com/support
2
2
• Login Page did not show on screen.
Go to Step 3.
• Unable to connect to Internet.
Go to Step 4.
• Problem not listed above.
Go to Step 5.
3
Troubleshoot
Login Page did not show on screen
3 continued
Ensure:
• Router is powered on, and lights are on.
• Make sure Power Supply is connected to
Router with a separate Ethernet cable , not the short cable attached to the Power
Supply.
(pic.1)
• Cables are clicked in on both ends.
• Computer is plugged into a LAN port, not the WAN port. (LAN light should be lit)
• Computer gets IP address automatically.
Follow steps on right.
(pic.2) (pic.3)
(pic.1)
If the above steps did not resolve your issue Go To Step 5.
Ensure comptuer is configured properly:
Mac:
Open System Preferences.
Select Network.
Select Ethernet.
Ensure Using DHCP is selected.
Windows: 7 and Vista
Open your Control Panel.
Select Networking or Network and Sharing Center.
Select Change Adapter Setting.
Right-Click Local Area Connection.
Select Properties.
Select TCP/IP or Internet Protocol Version 4
Select Properties
Ensure Obtain an IP address automatically is checked.
4
Troubleshoot
Unable to Connect to
Internet
Ensure:
• Internet access device is powered on.
• Internet access device is connected to the WAN port.
• Reboot the Internet access device.
• Reconfigure Router connection settings.
• Connecting to an “all-in-one” router/gateway device?
Put AyrMesh into the DMZ of the device:
Visit http://ayrstone.com/support for examples.
Contact your ISP for detailed instructions.
If the above steps did not resolve your issue Go To Step 5.
5
Contact Us
Additional Help
Visit
Ayrstone.com/support
for detailed instructions, videos, slide shows, and a troubleshooting guide. scan with mobile device www.Ayrstone.com/support
Email: [email protected]
Phone: 1-888-837-0637 x101
