advertisement
Borescope with 7'' monitor / battery operation or mains supply /
camera head Ø 26 mm with 12 bright LEDs / with SD memory card data transfer via Mini USB
The VIS 250 Borescope serves for the simple analysis of weak spots in wastewater pipes, as well as the maintenance of downpipes and exhaust gas lines. The Borescope can either be battery-operated or supplied by mains-adaptor. The equipment is delivered in a hard case, compact and impresses with its easy handling as well as its quick readiness. The VIS 250 Borescope supports electric meter count.
Furthermore, the VIS 250 Borescope can record and document the complete inspection process thanks to its integrated storage. The
Borescope possess a water-resistant camera head which is equipped with 12 bright LEDs. Optical analysis of tubes and shafts has never been as easy as with the VIS 250 Borescope, which does not even have a problem with bows in pipes with a diameter of only 40 mm.
The VIS 250 Borescope does also possess an option to display where the top and the bottom of the camera head is situated and how many degrees the camera head is lowered or lifted. In addition to that, the VIS 250 Borescope can equipped with the Locator L 200, which makes it easier to locate damaged spots. The Locator L 200 is able to spot the camera head from above the ground by measuring the long radio waves which are sent from the camera head, while the Borescope produces both visual and acoustic signals. Those signals help the user to find the affected pipe section. The TFT monitor of the Borescope is swivelling and can even be removed from the hard case (cable length of 2 m) in case that a place is difficult to access.
- camera head of Ø 26 mm
- water-resistant camera head
- light sensitivity of 0.5 lux
- memory card
- push rod of 20 m length
- battery operation up to 4 h
- 12 bright LEDs
- 7 " TFT monitor
Technical Specifications
Display
Dimensions of the case
Display
Output/Video Out
Weight
Power supply
Operation time
Camera head Ø 26 mm
Miniature camera head
Pixel
Light sensitivity
Lens
Angle of image sensing
Light source
Protection
Dimensions
Operating temperature
Storage temperature
Hard Case
Dimensions
Weight
Locator receiver
Display
Output impedance
Headphones
Power supply
Working temperature
Storage temperature
Weight
Dimensions
Length measurement
Resolution
Storage
Recording
Interface
176 x 114 x 32 mm
7 '' / 16:9 format
FBAS signal
400 g
2 batteries, 12 V each or mains adaptor each battery 120 min = 4 h
1/3 " COLOUR CMOS
768 x 576 (PAL), 656 x 492 (NTSC)
0.5 lux f = 2.3 mm, F = 2.5
115 °
12 white LEDs
IP 68 (water resistant)
Ø 26 x 38 mm
0 ... +40 °C, RH 95 % MAX
-20 ... +50 °C, RH 95 % MAX
510 x 430 x 170 mm
7 kg
Graphic visualisation
Type 32 Ohm
3,7 V Li Ion Akku
0 ... +40 °
-10 ... +40 °C
605 g
32 x 14 x 7 cm
Electronic meter count
0,04 m
2 GB SD memory card (2,5 h recording)
Mini-USB
Delivery content
1 x Borescope VIS 250 with video storage and electronic meter count, 1 x camera head (Ø 26 mm), 1 x SD memory card 2 GB,
1 x Mini-USB cable, 1 x TFT monitor, 1 x 2 m connection cable for monitor, 1 x anit-slip mat, 1 x NiMH battery, 1 x charger
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project