Home Decorators Collection 1660200930 Instructions / Assembly

 HOME
DECORATORS
COLLECTION
HDC# 16602 MFG# TW-19356WO
CARSON DINING TABLE 30"Hx48"Wx48"D WASHED OAK
ASSEMBLY INSTRUCTIONS
Note: 1. Before assembly, please be sure to work on a soft,
flat surface to avoid any damage to the finish.
2. You need at least 2 people to finish the assembly of
this product.
Made In China
P 1/3
BEFORE ASSEMBLY
IMPORTANT NOTE: READ CAREFULLY BEFORE ASSEMBLY TO PREVENT DAMAGE TO PARTS. FOLLOWING
INSTRUCTIONS LISTED BELOW IN THE PROPER SEQUENCE AS NUMBERED TO ASSURE FAST, EASY AND
CORRECT ASSEMBLY.
THANK YOU FOR PURCHASING THIS QUALITY PRODUCT. BE SURE TO CHECK ALL PACKING MATERIAL
CAREFULLY FOR SMALL PARTS, WHICH MAY HAVE CAME LOOSE INSIDE THE CARTON DURING
SHIPMENT. COUNT ALL PARTS AND MATERIAL HARDWARE, COMPARE WITH PARTS LIST TO BE SURE
ALL PARTS ARE PRESENT. IF ANY PARTS ARE MISSING OR DAMAGED, PHONE, FAX OR MAIL TO OUR
CUSTOMER SERVICE DEPARTMENT. FOR EFFICIENT AND SPEEDY SERVICE, PLEASE INDICATE THE
MODEL NUMBER AND CODE LETTER OF PART NEEDED.
HARDWARE LIST
ROUND HEAD BOLT ROUND HEAD BOLT
48 PCS FLAT WASHER
4 SETS
“ug © сел
(1)
PARIS LIST
TOP PANEL METAL RING METAL RING METAL RING
| РС 1 PC 1 PC 1 PC
J
Ne
A B D
LEG
16 PCS
E
NOTE: THE SURFACE WITH THE STICKER IS THE BACK SIDE.
P 23
ASSEMBLE TOP PANEL (A), METAL RING (В & C & D) AND LEG (E)
* USE ROUND HEAD BOLT AND FLAT WASHER (2) TO ASSEMBLE METAL RING (B) AND
TOP PANEL (A) TOGETHER.
* USE ROUND HEAD BOLT (1) TO ASSEMBLE METAL RING (B & C & D) AND LEG (E) TOGETHER.
CONNECT ALL SIXTEEN LEGS (E) TO THE THREE METAL RINGS (B, C, AND D). DO NOT FULLY
TIGHTEN UNTIL ALL LEGS ARE IN PLACE.
P 3/3