EN

WayteQx995 GPS navigation

Quick guide

1. WARNINGS AND NOTES



This device is only for helping navigation on the road, cannot be used for precise direction and distant measuring.



The planned route is only a suggestion. It is the responsibility of the user to observe traffic rules, signs on signboards and roads and signs of signaling lamps.

Don’t try to repair the device by yourself. Don’t try to open or disassemble the product. Don’t try to modify the software of the device. Don’t use any software with the device that is illegal or not compatible with it. If any fault happens because of those mentioned above mentioned is not observed it can invalidate the warranty.

Removing or harming the warranty label placed on the device can also invalidate warranty.

2

2. TECHNICAL SPECIFICATION

RAM memory

Internal flash

LCD screen

Memory Extensibility

1 GB

8 GB

5” TFT LCD, 800x480 pixel microSD memory card, max. 32

GB

Mini USB connector USB

Speaker Integrated

Headphone output 2.5 mm stereo jack

GPS receiver MT6627

Charging current

Car charger

Operating system

Navigation software

FM Transmitter

Bluetooth speakerphone

Operating conditions

DC 5V / 2 A

DC 12-24V/2.5A – 5V/2A

Android 4.4.2

Optional

Integrated

Supported

5°C ~ 40°C operating

-10°C ~ 50°C storage

86KPa ~ 106KPa atmospherical pressure

35% ~ 80% RH operating

30% ~ 90% RH storage

3

3. CONTROLS

1

2

3

4

5

6

7

4

8

9

1. Notification LED

2. Earphone output

3. MicroSD memory card

4. LCD touchscreen

5. Mini USB charging and data socket

6. Power ON/OFF switch

7. Speaker

8. RESET button

9. Microphone

4. CHARGING WITH THE AC CHARGER

WARNING: During charging, the LED glows in red color. Do not disconnect the device from the charger until charging is complete and the LED glows in blue color. Charge the device when the battery level is low.

Connecting the car charger

Use continuous power supply with the supplied car charger when the device in use.

WARNING: in order to avoid sudden power surges, attach the device only after you have started the engine.

Indicator of the fully charged battery.

Battery

The device can be operated between 5 - 40°C, and it can be stored safely between-10 - 50°C. Do not expose the

5

device to high temperatures or hot environment for a prolonged time. For example do not leave the device exposed to direct sunlight in the car. To avoid damage to the device, keep it away from harsh environment.

Please follow the local guidelines and regulations before you dispose the battery.

5. USING THE DEVICE

5.1Turn ON/OFF

In order to turn on the device, press the POWER button for

3 seconds. You will see the following screen when the system is started and it is ready to use:

6

Main functions:

 Navigation application launcher

 Music/Video playback, photo viewer

 Application list

 FM transmitter

 File manager

 Calculator

 GPS receiver status and information

 Settings

In order to turn off the device: press and hold the POWER button for 2 seconds. A dialog boksz will appear. Select

“Power off” menu item to safely shut down the device.

5.2Status bar

At the bottom and top of thes creen, the status bar contains the following icons: Back, Home, Recently viewed applications, Volume up/down adjustments. It also displays current time, Wi-Fi status, Bluetooth status,

Battery level and other notifications.

On any functional screen, tap this icon to go back one screen or exit application.

On any functional screen, tap this icon to go to the Home screen

7

Shows a list of thumbnail images of applications you’ve recently opened. To reopen an application, touch its thumbnail image. To remove a thumbnail from the list, swipe it up or down.

Current time

Wi-Fi connection and signal strength

Battery level. It will turn orange when battery is low and turn red when battery level is critically low.

5.3 Navigation

After installing Sygic navigation software it is needed to turn on Wifi function device (there is no need for Internet connection) after turning on the device. This is because software needs to identify the device. For that reason it is suggested that before starting navigation software turn on

Wifi function for a couple of seconds. After this Wifi function can be turned off. If it is not done Sygic software won’t be loaded. If the device is not turned off and only switched to sleep mode than suggestions above is not needed to be done.

8

5.4 FM Transmitter

Using FM transmitter, you can wirelessly forward thesound of the applications to your car stereo.

Tap the „Open” label. With the + and – buttons you can choose an appropriate frequency. Tune your car stereo to this frequency.

Remark:

You should choose a frequency which is not used in your area to avoid any interference.

Using the FM transmitter requires a connected car charger.

9

4.4 GPS Info

With this application, you can check the status of the GPS receiver without any navigation software.

5. DECLARATION OF COMFORMITY (ex.)

The importer states, that this product complies with the conditions of use, and in accordance with regulations, there is a product sticker on it, and have a warranty card and a user’s manual in the box.

Based on a statement issued by the manufacturer, the product will be placed on the market with CE marking.

© 2016 All Rights Reserved, WayteQ Europe Ltd.

10

6. IMPORTER / DISTRIBUTOR:

WayteQ Europe Ltd.

6th Gubacsi str.

BUDAPEST, 1097

HUNGARY

Phone: +36-1 21 73 632 www.wayteq.eu [email protected]

WARNING: WayteQ reserves the right to change the user manual without any notice. The parameters of the product can change without any notice.

11

12