INSTALLATION MANUAL
METAL CBU
MAINTENANCE
MANUAL
TYPES I, II, III, AND IV
METAL CBU
TYPES I, II, III, AND IV
1570 “F” SERIES
A FLORENCE COMPANY
5935 CORPORATE DRIVE
MANHATTAN, KANSAS 66503
Ph. 800-275-1747
Fax. 800-275-5081
www.auth-florence.com
TABLE OF CONTENTS
DESCRIPTION
PAGE
CBU INFORMATION
SITE PREPARATION AND PEDESTAL INSTALLATION
SECURITY TOOL REQUIREMENTS
INSTALLATION OF AN ARROW LOCK
PARCEL ARROW LOCK INSTALLATION
PEDESTAL TO CBU INSTALLATION
2
3
4
5
7
9
YOUR ISO 9001 MAILBOX SUPPLIER
91194_F_INSTALL
AF PART # 91194 Rev B
THIS PAGE INTENTIONALLY LEFT BLANK.
91194_F_INSTALL
AF PART # 91194 Rev B
I
II
III
IV
INSTALLED HEIGHT
TYPE I
62”
TYPE II
62”
TYPE III
62”
TYPE IV
62”
DEPTH
17-7/8”
17-7/8”
17-7/8”
17-7/8”
WIDTH
30-1/2”
30-1/2”
30-1/2”
30-1/2”
WEIGHT (WITHOUT PEDESTAL)
107 LBS
111 LBS
147 LBS
137 LBS
WEIGHT (WITH PEDESTAL)
125 LBS 129 LBS
162 LBS
152 LBS
QTY OF STANDARD COMPARTMENTS
8
12
16
13
QTY OF PARCEL COMPARTMENTS
2
1
2
1
PARCEL COMPARTMENT HEIGHT
10”, 13”
10”
10”, 13”
10”
91194_F_INSTALL
AF PART # 91194 Rev B
BOX OUTLINE
BOX OUTLINE
BOX OUTLINE
REINFORCING STEEL RODS
ON 14.00” CENTERS MAXIMUM
EACH WAY (CONFORMING TO
ASTM A615 GRADE 60)
NOTE:
CONCRETE SHALL HAVE A
COMPRESSIVE STRENGTH OF
3000 PSI @ 28 DAYS, CONTAIN
4% MIN ~ 6% MAX AIR
ENTRAPMENT AND BE
PLACED WITH A 3.50 ~ 4.50
SLUMP IN ACCORDANCE TO
301.
0.25
MOUNTING NUT/WASHER (NOT INCLUDED)
(CONFORMING TO ASTM A193, GRADE B8M
TYPE 316 STAINLESS STEEL, NOT INCLUDED)
SITE PREPARATION
AND PEDESTAL INSTALLATION
METAL CBU TYPES I, II, III, AND IV
1570 “F” SERIES
91194_F_INSTALL
AF PART # 91194 Rev B
IMPORTANT NOTICE FOR USPS INSTALLERS
METAL CBU TYPES I, II, III, AND IV
1570 “F” SERIES
INSTALLER MUST ORDER McGARD SCREW DRIVER
(USPS - MAIL EQUIPMENT SHOP PART NUMBER 110050)
TO INSTALL AND SERVICE THE PARCEL ARROW LOCK COVER
ON THE NEW AUTH-FLORENCE CBU.
IF THE
McGARD SCREW DRIVER MES NO. 110050
NEEDS TO BE ORDERED
IT MAY BE ORDERED BY FAXING AN “OFF CATALOG” eBUY REQUEST TO:
USPS MAIL EQUIPMENT SHOP
FAX NO. (202) 281-2643
QUESTIONS? CALL THE USPS MAIL EQUIPMENT SHOP AT (202) 281-2620
91194_F_INSTALL
AF PART # 91194 Rev B
INSTALLATION OF AN ARROW LOCK
METAL CBU TYPES I, II, III, AND IV
1.
2.
1570 “F” SERIES
OPEN ARROW LOCK DOOR.
REMOVE FIVE (5) 86091 10-32 LOCK
NUTS, AS WELL AS 92303 LOCK SUPPORT
PLATE (DISPOSE OF PLASTIC
SHIPPING SPACER).
3.
PLACE ARROW LOCK IN TO ARROW
LOCK SECURITY BRACKET AND
POSITION ON DOOR.
4.
REPLACE ONE (1) 86091 10-32 LOCK NUT
IN THE REAR POSITION TO SECURE
ARROW LOCK SECURITY BRACKET.
5.
6.
INSTALL 92303 LOCK SUPPORT PLATE AS
SHOWN.
REPLACE FOUR (4) 86091 10-32 LOCK
NUTS. TORQUE 250 TO 30
INCH-POUNDS.
REQUIRED TOOLS
3/8” SOCKET WRENCH
91194_F_INSTALL
PART #
86091
92300
92303
DESCRIPTION
10-32 LOCK NUT
ARROW LOCK SECURITY BRACKET
LOCK SUPPORT PLATE
ARROW LOCK
AF PART # 91194 Rev B
INSTALLATION OF AN ARROW LOCK
1.
2.
PLASTIC
SHIPPING
SPACER
86091
3/5.
ARROW LOCK
4.
6.
91194_F_INSTALL
92303
AF PART # 91194 Rev B
PARCEL ARROW LOCK INSTALLATION
METAL CBU TYPES I, II, III AND IV
1570 “F” SERIES
1.
2.
3.
4.
5.
6.
OPEN PARCEL DOOR, REMOVE AND
DISCARD FOUR (4) PLASTIC SHIPPING
RETAINERS (TWO ON LATCHING
ASSEMBLY COVER AND TWO ON ARROW
LOCK COVER).
REMOVE PLASTIC BAG OF FASTENERS (IT
CONTAINS ALL FASTENERS NECESSARY
TO INSTALL POSTAL LOCK IN ONE
PARCEL DOOR).
INSTALL ARROW LOCK AS SHOWN AND
SECURE WITH FOUR (4) 86091 10-32
LOCK NUTS. TORQUE 25 to 30 INCHPOUNDS.
INSTALL LATCHING ASSEMBLY COVER
91255 USING TWO (3) 84994 10-32 X .375
UNF-2A 18-8 SS PASSIVATED 1-WAY
TAMPER PROOF FASTENERS.
INSTALL ARROW LOCK COVER 91259
USING TWO (2) 84993 10-32 X .312
UNF-2A 18-8 SS PASSIVATED MCGARD
FASTENERS.
REMOVE LABEL FROM COVER.
PART #
84993
84994
REQUIRED TOOLS
FLAT SCREWDRIVER
USPS PROPRIETARY MCGARD TOOL
3/8” SOCKET WRENCH
PLIERS
91194_F_INSTALL
86091
91255
91259
DESCRIPTION
10-32 x .312 UNF-2A 18-8 SS
PASSIVATED MCGARD
10-32 X .375 UNF-2A 18-8 SS
PASSIVATED 1-WAY TAMPER PROOF
10-32 LOCK NUT
LATCHING ASSEMBLY COVER
ARROW LOCK COVER
ARROW LOCK
AF PART # 91194 Rev B
PARCEL ARROW LOCK INSTALLATION
1/2.
1.
PLASTIC
SHIPPING
RETAINERS
3.
84994
91255
86091
4.
84993
5.
6.
91259
91194_F_INSTALL
AF PART # 91194 Rev B
PEDESTAL TO CBU INSTALLATION
METAL CBU TYPES I, II, III AND IV
1570 “F” SERIES
1.
2.
3.
4.
5.
6.
OPEN MASTER LOADING DOORS.
REMOVE LEFT AND RIGHT SIDE 91079
FLOATING SHELVES, EXPOSING
MOUNTING HOLES.
PLACE UNIT ON PEDESTAL.
FROM UNDERNEATH UNIT, INSERT FOUR
(4) 86101 3/8-16 X 1.25 CARRIAGE BOLTS
UPWARD.
FROM INSIDE PARCEL COMPARTMENTS,
ADD FOUR (4) 86097 3/8” X .688 OD
LOCK WASHER AND TIGHTEN FOUR (4)
86089B 3/8-16 HEX NUTS. TORQUE TO 22
FOOT-POUNDS.
REPLACE LEFT AND RIGHT SIDE 91079
FLOATING SHELVES.
REQUIRED TOOLS
9/16” SOCKET WRENCH
10
91194_F_INSTALL
PART #
86089B
86101
91079
91129
91121
86097
DESCRIPTION
3/8-16 HEX NUT
3/8-16 X 1.25 CARRIAGE BOLT
FLOATING SHELF
PEDESTAL FOR TYPE I, II
PEDESTAL FOR TYPE III, IV
3/8” X .688 OD LOCK WASHER
AF PART # 91194 Rev B
PEDESTAL TO CBU INSTALLATION
5.
86084B
86089B
3.
86097
86101
4.
1.
2/6.
91079
91194_F_INSTALL
AF PART # 91194 Rev B
11
">
