Safe Door Systems SDSW2HN Instructions / Assembly

1 Measure and Trim 7 Safe Door Channel
Installation
e Align holes with latch and deadbolt. e Apply silicone adhesive along inside
* If necessary trim Safe Door Channel to $ corners of Safe Door Channel
the length of your door using hacksaw. 1/4” bead 1/4” from inside corner.
*NOTE: Oval holes do not have to be e Install Safe Door Channel to edge
centered with latches. of door.
3" or 1 1/4"Screw A. Use 2 x 3” screws in top hinge
O and bottom hinge (As shown)
O , , B. Use 2 x 1 1/4” screws in top
ot 3° or 1 1/4 Screw hinge and bottom hinge
As shown) if there is a sidelite
``
glass beside the hinge side
PARTS INCLUDED:
Safe Door Channel, 12” Striker, Screws (12 x 3” / 14 x 1 1/4”), Silicone Tube.
TOOLS NEEDED: Hammer, 1” Wood Chisel, Drill (Hacksaw to trim)
Safe Door Systems Inc.
www.safedoorsystems.com
12” Striker
Installation
A) Template Tracing
B) Chisel Frame
C) Install 12” Striker
A.
Mount 12” striker onto
frame with 2 x 1 1/4”
screws temporarily Ш
(as shown). #1
Trace outline with
pencil |
B.
Remove 12” striker
and chisel frame to allow
12” striker to fit flush
Install 12” striker
onto frame using
screws provided
*NOTE: See Step 4
—— *хохооок
(>
12” Striker
Applications
D) No glass beside Striker
E) Glass Beside Striker
F) Double Door Install
e Door with NO glass beside locks.
e Use 4 x 3” Screws and
2 x 1 1/4” Screws
e Door WITH glass beside locks.
e Use 6 x 1 1/4” Screws
Install Safe Door Channel onto
active / operating door. Install 12” Striker
Plate onto in-active / non-operating door
use 4 x 3” screws and 2 x 1 1/4” screws.
© Final Step
o Prime and paint if desired