nano station

www.jbctools.com
NA
NANO STATION
NA / NANO STATION
NA-2A / NA-1A / NA-9A
NT105-A
NP105-A
CONTROL UNIT
NANO SOLDERING
NANO TWEEZERS *
IRON *
MANUAL
w w w.jbctools.com
NA
NANO STATION
0007274 x2
0011568
EN-A x 2
0009848
TOOL HOLDER
CARTRIDGE SET Nº1 *
CARTRIDGE
ALLEN KEY
EXTRACTOR
1,5mm
CONTAINS:
C105101 x1
C105103 x1
C105105 x2
C105107 x1
C105112 x1
C105113 x2
CL8973 x 2
N1738
METALLIC BRUSH
SLEEVES
POWER CORD
A1205
TOOLS EXTENSION CORD (1m.)
*SOLD SEPARATELY
* These accessories are not supplied with NA-2A / NA-1A / NA-9A control units
2
INSTALLATION
NT105-A
NP105-A
NANO SOLDERING IRON
NANO TWEEZERS
NA-2A / NA-1A / NA-9A
CONTROL UNIT
Main switch
Power cord
socket
Equipotential
connector
PART NAMES
Cable collector
Heat
Management
Intelligent
process control
Cartridge
extractor
Metallic
brush
3
TOOL HOLDER ASSEMBLY
CABLES ASSEMBLY
NANO
NANO TWEEZERS
4
SOLDERING IRON
METALLIC BRUSH REPLACEMENT
C105 CARTRIDGE RANGE
All the cartridges shown are actual size. All dimensions are in milimiters (mm).
¥
¥
¥
¥
C105-101
C105-103
C105-106
C105-107
0,2 x 0,1
0,4 x 0,2
_
1 x 0,3
1,8 x 0,5
C105-116
C105-117
C105-108
C105-113
C105-114
¥
¥
ø 0,5
C105-105
C105-110
0,7
C105-111
3,5
0,3
C105-109
2,5
C105-112
1
C105-115
Stainless
steel tip
Contact JBC if other shapes are needed.
5
HEAT MANAGEMENT
JBC stations intelligently manage the tool temperature
and it helps to extended the tip life:
Expected life
(hours)*
700
600
500
400
Work mode: Lift tool from the stand and the tool tip
heats up to the selected temperature.
300
200
100
Sleep mode: When the tool is in the stand, the
temperature reduces (preset sleep temperature is
180ºC / 360ºF).
Hibernation mode: After longer periods of inactivity
(pre-set to 30 minutes), the power is cut off and the
tool cools down to room temperature.
Heat management increase tip life which reduces cost of ownership.
6
0
200
225
Sleep
Temp
250
275
300
325
350
Working
Temp
375
400
425
450
Temperature (ºC)
CONTROL SCREEN
Selected temp. 3 5 0 o C
350 c
0
Tip temperature
Power 10%
% Instant power supplied to the tool
Decrease & move down
Access Menu
&
Confirm Selection
Increase & move up
Main menu
SETTINGS MENU
ORIGINAL PIN: 0105
Station settings
Back
Exit
Reset settings
Station settings
Tool settings
4
5
Counters
Program version
Counters
Tool settings
1 Temp unit
Celsius
2 Maximum temp 4000C
3 Minimum temp
2000C
4 Help text
OFF
5 Beep
6 Change PIN
1
2
3
ON
1 Fix one temp
2 Temp levels set
3 Sleep delay
Port 1
----OFF
0 min
Tool NT105
4 Sleep temp
1800C
5 Hibernation delay 30 min
6 Temp adjust
O OC
Port 1
Back
Tool NT105
1
2
3
Plugged hours
Working hours
Sleep hours
0
0
0
Port 1/2
4 Hibernation hours
5 No tool hours
6 Sleep cycles
Port 1/2
0
0
0
Back
7
TECHNICAL SPECIFICATIONS
-
-
-
-
-
-
-
-
-
-
-
Temperature selection from 90°C (190°F) to 400°C (752°F) (±5%).
Output Peak Power: 12W.
Ambient operating temperature: 10-40ºC (50-104ºF)
Safety transformer, mains separator and double isolation.
NA-2A 230V 50/60Hz. Input fuse: 0,2A. Output: 7,5V.
NA-1A 120V 50/60Hz. Input fuse: 0,5A. Output: 7,5V.
NA-9A 100V 50/60Hz. Input fuse: 0,5A. Output: 7,5V.
Total weight of unit: 1,6 kg (3,5 lb).
Complies with CE standards on electrical safety, electromagnetic compatibility
and ESD protected housing “skin effect”.
RoHS compliant.
Equipotential connector and the tool tip are connected to station mains ground supply for ESD protection.
This product should not be
thrown in the garbage.
WARRANTY
JBC’s 2 years warranty guarantees this equipment against all
manufacturing defects, covering the replacement of defective parts
and all necessary labour.
Warranty does not cover product wear due to use or mis-use.
In order for the warranty to be valid, equipment must be returned,
postage paid, to the dealer where it was purchased enclosing this
fully filled in, sheet.
SERIAL Nº
STAMP OF DEALER
www.jbctools.com
0009040-0812
DATE OF PURCHASE