B-Air VP-50 Use and Care Manual

Operating Instructions
The B-Air Vent VP-50 Centrifugal Air Mover as packaged is ready to
be placed into service.
The VP-50 is intended to be used by carpet cleaning, janitorial, sani-
tation, water damage restoration and construction professionals for
general structural surface drying and ventilating applications.
Place the unit on the ground. Plug the unit into a grounded outlet and
select the desired speed.
Maintenance
WARNING: As with all electrical equipment, the unit must be discon-
nected from power before servicing or cleaning.
Before each use, inspect the unit for damage, blocked inlets and
exhaust and for foreign material buildup.
When the Vent VP-50 is turned on, inspect the unit for excessive
vibration. In the event of excessive vibration or if the fan wheel rubs
against the rotomolded housing, immediately turn off the unit and
have a certified technician inspect the unit.
Servicing
In order to receive service or replacement parts under warranty, you
must:
a. Call for an RMA (Return Merchandise Authorization Number)
b. Have proof of purchase
Upon inspection, we will advise you of the repairs needed and the
cost (if applicable). B-Air will issue repair or replacement parts
depending on warranty.
Limited Warranty
Warranty covers against defects in material and craftsmanship used
under normal intended use to original purchaser for a term of (1) one
year from the original date of purchase including parts, labor and 1
way shipping. Housing is covered for a term of (5) five years from the
date of the original purchase.
Important!
Warranty does not cover signs of misuse including, but not limited to
rough handling, abuse, tampering, improper voltage use and unau-
thorized maintenance and repairs