Beafon SL320 User manual
Beafon SL320 is a feature phone designed for easy use, featuring a simple and intuitive interface. It offers essential functionalities for basic communication, including phone calls, text messages, and a phonebook for storing contacts. Additionally, it has an SOS emergency button for immediate assistance in case of emergencies. While it lacks advanced capabilities like internet browsing or app usage, the Beafon SL320 excels in its simplicity and user-friendliness, catering to those who prioritize ease of use and reliable communication.
Advertisement
Advertisement
User Manual
SL320
General Information
Congratulations on your purchase of a Bea-fon
SL320!
Please read this information for better handling of the telephone. We do not assume any liability due to improper use.
We are constantly striving to improve our products and our service. Therefore, Bea-fon reserves the right to make modifications and improvements to any of the products described in this documentation without prior notice.
The content of this User Manual is presented as it is. Bea-fon does not assume any responsibility for the accuracy and completeness of the content of this user manual.
The photos in the user manual could deviate slightly from the actual telephone; these only serve as an example; please refer to the telephone. Some functions are dependent on a network operator; for further information, contact your network operator.
Please check the supplied accessories to ensure that the accessories are all there.
Should one of the components be missing or defective, please contact the dealer where you purchased the telephone.
2
Bea-fon SL320 Contents:
1 Telephone
1 Charging station
1 Charger
1 Battery
1 USB cable
User Manual
3
General Information
Should the font be too small and hardly legible for you, you may view a larger version of the user manual on our website.
Go to Products on our website: www.beafon.com
Device Code:
The use of this code can prevent unauthorized persons from using this telephone. The factory default code is:
0000
PIN Code:
The code from the network operator that is provided with the SIM card prevents the use of the card by unauthorized persons. You can activate/deactivate or change the PIN code.
4
Table of Contents
General Information ................................ 1
Device Code: ...................................... 4
PIN Code: ........................................... 4
My Telephone SL320 ................................ 8
Getting Started ...................................... 10
What is a SIM card? ............................ 10
Inserting the SIM card and Micro SD card
........................................................ 10
Inserting the Battery .......................... 11
Charging the Battery .......................... 12
Switching the telephone on/off: ........... 13
Standby ............................................ 14
Lock screen ....................................... 14
Flash light (Torch) .............................. 15
Menu function .................................... 15
Display symbols ................................. 17
Headset/Bluetooth mode ..................... 18
Call functions ......................................... 19
Call ................................................... 19
Making a call using the Phonebook ....... 19
Making calls using the Photo Contacts ....... 19
Create photo contact .......................... 20
Answering a call ................................. 21
Functions during a conversation ........... 21
Volume control ................................... 21
Hands-free ........................................ 22
Main menu ........................................ 22
Menu .................................................... 23
Phonebook ............................................ 24
Accessing your telephone numbers ....... 24
5
New contact ....................................... 24
Editing a contact ................................ 24
Delete all contacts .............................. 25
Preferred storage ............................... 25
Speed dial ......................................... 25
Memory status ................................... 26
Messages .............................................. 27
Write messages .................................. 27
Text input .......................................... 27
Activate or deactivate the automatic word recognition ........................................ 28
Inbox ................................................ 28
Outbox: ............................................ 29
Drafts ............................................... 29
Sent messages ................................... 29
Please note MMS: ............................... 29
Settings ............................................ 30
SMS (Settings) ................................... 30
Multimedia Messages .......................... 31
Voicemail server ................................. 31
Call history ............................................ 33
Call history ........................................ 33
Delete call logs: ................................. 33
Call duration ...................................... 33
Extras ................................................... 34
Alarm................................................ 34
Events .............................................. 34
Calendar ........................................... 35
Calculator .......................................... 35
Services ............................................ 36
Multimedia ............................................ 37
Camera ............................................. 37
6
Taking photographs ............................ 37
Show pictures .................................... 39
Copy pictures to the computer ............. 39
File manager ...................................... 40
Settings ................................................ 41
Tone Settings..................................... 41
SOS emergency number ...................... 41
SOS settings ...................................... 43
One touch keys M1 M2 ........................ 44
Phone settings ................................... 44
Call settings ....................................... 46
Network settings ................................ 47
Security settings ................................ 48
Connections: ..................................... 49
Restore factory settings ...................... 51
Specifications: ................................... 51
FAQ ...................................................... 52
Battery ................................................. 54
Phone ................................................... 56
For your safety ...................................... 58
Information ........................................... 64
7
My Telephone SL320
1 Menu button, left (M1):
in standby mode, you can enter the main menu with this button
One touch key (M1)
In standby mode, press and hold the key for 2-3 seconds in order to begin the direct dial function
2 Green Call key/Call logs
In order to access the call logs in standby mode
3 * Key
Press this key in standby mode in order to enter the following characters: */+/P/W.
Lock screen
In standby mode, press and hold this key for 2-3 seconds
8
4 Speaker
5 Arrow key (upwards),
in standby mode to access the SMS menus, camera, alarm clock and calendar
6 Menu button, right
In order to access the Phonebook in standby mode
One touch key M2
In standby mode, press and hold this key for 2-3 seconds
7 Power on/off/End conversation
8 Arrow key (downwards)
In order to access the photo contacts in standby mode
9 # Key
Press and hold in standby mode to activate/deactivate the silent mode.
In Edit mode;
change the input method.
10 Emergency call button
11 Polyphonic speakers
12 Camera
13 Microphone
14 Charging tray connection
15 Micro USB connection for charger and headset
16 Flashlight
9
Getting Started
What is a SIM card?
Every mobile telephone requires an SIM card
(Subscriber Identity Module); without the SIM card, you cannot make phone calls. The SIM card is a microprocessor that saves your data and contacts. Therefore, handle the card with care and exercise caution when inserting or removing the card. Keep the SIM cards out of reach of small children.
Inserting the SIM card and Micro SD card
1. The telephone must be switched off and disconnected from the charger.
2. Remove the battery cover on the back of the phone
3. Should the battery be in the device, please remove it.
4. There are 2 card holders available: On the top for SIM cards and underneath that on the right for the Micro SD card.
5. Carefully insert the SIM card in the SIM card slot (1). Make sure that the goldcolored contacts on the card are facing downwards and the tapered corner is facing left.
10
Getting Started
6. Micro SD: Carefully push the Micro SD card in the SD Micro SD card holder (2) and lock it afterwards.
11
Inserting the Battery
1. Align the gold-colored contacts of the battery with the corresponding contacts of the phone.
2. Press the other end of the battery until it snaps into place.
3. Slide the battery cover on the device until it locks into place.
Charging the Battery
There are two ways in which the battery
SL320
can be charged:
A.
B.
Charging station
Charger
12
1. Insert the charger connector into the telephone.
2. Connect the charger to a power outlet.
3. It could take several hours to charge the battery. If the telephone is charged while it is switched off, it takes a few seconds before the charging indicator appears in the display.
4. If the telephone is charged while switched on, the battery indicator begins to go up.
The battery is fully charged when the battery indicator no longer goes up.
5. Disconnect the charger from the network and from the device when it is no longer needed!
Note: The initial charging of the battery should take at least 12 hours.
Switching the telephone on/off:
Make sure that the SIM card is in the telephone and that the battery is charged.
1. Press and hold the
red key
for 2-3 seconds in order to switch on the telephone.
2. If the PIN code is activated, the telephone will now prompt you for your PIN code; please enter it and confirm your entry with the
OK (M1 key)
.
3. Please select your language and confirm your selection with
“OK” (M1 key)
.
13
4. Press and hold the
red key
for 2-3 seconds in order to switch off the telephone.
Note: Without the SIM card, only the emergency call number can be dialed.
If the PIN code is entered wrong 3 times, the telephone asks for the PUK code, which you received along with your SIM card from your network operator.
Standby
If you do not use the telephone for a short time period, the telephone automatically switches to standby mode. Press any key to exit this mode.
Calls can be answered in standby mode.
Lock screen
In order to avoid involuntarily pressing the keys, press and hold the * key for 2-3 seconds to activate the lock screen.
In order to exit lock screen mode, select unlock (
M1 key
) and press the * key within
1.5 seconds.
In order to answer a call when the keys are locked, press the call key. If you end or reject a call, the keypad is automatically locked again.
Additional functions:
Screen auto lock
See in menu item “
Settings – Security Settings
”.
14
You can still use the emergency call button even when the keys are locked.
Flash light (Torch)
On the home screen, press the “0” key for a few seconds, you can turn on the torch, thus the torch light is on; If you press the key again, then the torch is off, and the light is off.
Menu function
On the home screen, press the left menu button (M1) in order to go to the Main menu
( ) and the right menu button (M2) to go to
Contacts
( ).
By pressing the “Arrow key pointing upwards” you go to
Messages
( ) and to the menu items:
Camera, Alarm
and
Bluetooth
; by pressing the “Arrow key pointing downwards” you go to
Photo contacts
.
15
Display (Home screen)
1
7
5
6
8
2
4
3
9
1. Reception strength
2. Symbols
3. Battery status
4. Network operator
5. Time
6. Date
7. Menu
8. Messages
9. Phonebook
16
Display symbols
Reception strength:
The vertical bars show the strength of the reception of your network operator.
New Messages
This symbol is displayed when you receive a new message.
SIM card has an unread message. This symbol blinks when the Inbox folder is full. You have to delete some messages in order to be able to receive new messages.
Headphones
This symbol is displayed when headphones are plugged in.
Missed calls
This symbol is displayed when you did not answer a call.
Call signal
Only ring
Silent mode and vibrate
Vibrate and ring
Call forwarding
This symbol is displayed when all calls are being forwarded.
Alarm
This symbol is displayed when alarm clock is switched on.
17
Bluetooth
This symbol is displayed when the
Bluetooth is switched on.
Battery indicator
This symbol changes color depending on the status of the battery:
, , ,
Headset/Bluetooth mode
If a headset is connected to the USB socket (or a Bluetooth Headset), you can answer the call with the button on the headset.
18
Call functions
Call
1. Enter the telephone number including the area code and press the
green key
.
International Calls: Prior to entering the area code, enter a + -symbol by pressing
twice as well as the country (or regional) code. (If necessary, omit 0 before the area code).
2. Press
Delete
(M2 key) in order to delete the number on the left side of the cursor.
3. Press the
green key
to call the number.
Making a call using the Phonebook
If there are contacts saved in the Phonebook, you can make a call using the Phonebook.
1. In order to go to the Phonebook, press the M2 key when on the default screen.
2. Scroll upwards or downwards with the arrow to the desired telephone number.
3. Press the
green key
to call the number.
4. Press the
red key
in order to cancel or end the call.
Making calls using the Photo Contacts
In the default screen, press the
downwards arrow key
.
Here you can select up to 8 photo contacts.
Scroll with the
Arrow keys
to the desired
19
photo contact and then press the
Call key
(green key).
The selected photo appears in the photo contact directory. Carry out the following steps in order to assign a photo to this contact:
Create photo contact
1. In the default screen, press the
Arrow key (downwards)
in order to go to the photo contact menu.
2. Use the arrow keys to scroll.
3. To edit a photo contact, press “Options”
(
M1 key
), select
Edit
and confirm with the
“OK” (
M1 key
).
4. Enter the name and telephone number and add a caller picture.
5. You have the option to take a picture directly with the camera (from Camera) or to select an already saved photo (from a folder) using the file manager.
6. After that, press “Options” and select the predefined method under menu item 2.
7. Add the photo and confirm with
“Continue” (
M1 key
)
8. After you have finished editing the contact, to save it press “Option” (
M1 key
), select “Save” and press “OK” (
M1 key
).
Note: To save several pictures, you need a
Micro SD memory card. (Not included in the accessories)
20
Answering a call
When you receive a call and the telephone rings or vibrates, you see the number or the name on the display.
1. If you would like to answer the call, press the
green key
or
M1
.
2. If you would like to refuse the call, press the
red key
or
M2
.
Functions during a conversation
By pressing
Options
(M1 key) during a phone call, you can select from the following functions:
Hold*:
Hold this call.
End single call*:
End call.
Contacts:
To go to the Phonebook.
Call logs:
To go to the call logs.
Messages:
To go to the Messages.
Mute:
Switch the microphone on/off
Volume:
Adjust call volume
Note: The menu items marked with * must be supported by the SIM card. For more information, please contact your network operator.
Volume control
During the phone call, press the “up” or
“down” arrow key (rocker) to adjust the call volume.
21
Hands-free
You can switch the hands-free function on/off by pressing the right menu button (
M2
).
Main menu
22
Menu
1. Phonebook
1. Add new contact
2. Photo contacts
2. Messages
1. Write message
2. Inbox
3. Outbox
4. Drafts
5. Sent messages
6. Settings
7. Broadcast -
Messages
3. Calls
1. Missed calls
2. Dialed calls
3. Received calls
4. Call log
5. Call duration
4. Extras
1. Alarm
2. Reminders
3. Calendar
4. Calculator
5. Multimedia
1. Camera
2. Show pictures
3. File manager
6. Settings
1. Tone Settings
2. SOS button
3. M1/M2
4. Phone settings
5. Call settings
6. Network settings
7. Security settings
8. Connections
9. Factory defaults
23
Phonebook
You can save up to
300
telephone numbers in your SL320 telephone. On the SIM card, there is room for up to
300
telephone numbers.
Accessing your telephone numbers
You have two options to go to the contacts:
1. When in default mode, press the
M2 key
2. When in default mode, press the
M1 key
, select
Phone book
and confirm with
OK
Note: Symbolizes a SIM card entry.
Symbolizes a telephone entry.
New contact
1. Select
Add new contact
in the
Phonebook
menu.
2. Select memory:
SIM card
or
telephone
.
SIM storage:
Only the
Name
and
Mobile number
can be stored.
3. Telephone storage: As a default,
Name,
Mobile number
and
caller picture
are stored.
4. To save the
contact
press
Options
and
Save
.
Editing a contact
1. Select a name and press
Options
and select
Edit
and confirm with
OK
.
24
2. Edit the entries. To save the changes, press
Options
and select
Save
and confirm with
OK
Delete all contacts
1. Select
Menu, Phonebook
and press
OK (M1)
2. Press
Options (M1)
3. Select
Delete all contacts
and press
OK
(M1)
4. Select
SIM or telephone
and press
OK (M1)
5. Press
OK (M1)
again to confirm the deleting process.
Preferred storage
1. Select
Menu, Phonebook
and press
OK
2. Press
Options
3. Select
Settings
and press
OK
4. Select
Preferred storage
and press
OK
Select the preferred storage location for the newly created contacts:
SIM, Telephone
or
Both
.
Speed dial
1. Select
Menu, Phonebook
and press
OK (M1)
2. Press
Options (M1)
3. Select
Settings
and press
OK (M1)
4. Select Speed dial And press
OK (M1)
You can switch the Speed dial (status)
on
or
off
.
Set numbers:
25
Up to 8 numbers can be saved as speed dial numbers (2-9)
1. Select
Set numbers
and press
OK
.
2. Select the desired No. (2-9) and press
Edit
.
3. Select the desired name from the
Phonebook and press
OK
(the desired name must already be stored under
Contacts
).
On the default screen, press the desired number (2-9) and the assigned number will be called.
Memory status
1. Select
Menu, Phonebook
and press
OK
2. Press
Options
3. Select
Settings
and press
OK
4. Select
Memory status
and press
OK
Displays the number of all and the already used contact slots on the SIM and telephone
26
Messages
Write messages
1. Select
Menu, Messages
and press
OK
2. Press
Write message
3. Select
SMS
or
MMS
and press
OK
In this menu, you can compose messages.
The number of letters used can be seen at the upper right edge of the display.
Text input
The following functions are available:
Press
0
to add a space.
Press the
*
key to add special characters; using the “
Arrow keys
”, “ * ” and “
#
” keys, you can navigate to the desired symbols.
Press the arrow key to move the position indicator to the left or right.
Press
Delete
(M2) to delete a letter; to delete the entire text, press and hold
Delete
(M2).
Press the
#
key to switch between upper and lower case and word recognition:
Smart DE, DE, de, 123
and pay attention to the symbol in the top left of the display.
27
Activate or deactivate the automatic word recognition
When you write a text, press Options, and select
Input method options
.
To activate or deactivate automatic word recognition, select
Auto. Word recognition
and press
OK
Word recognition:
Enter the desired word by pressing the keys for each individual letter only once. The word changes depending on which key is pressed.
E.g. To write “Hello”, press the “42556” key.
After you have finished the message, press
Options
and select
Send
.
Here you have the option to add one or more
Contacts
to the
Message
Other Options:
Insert symbol, Input method, Advanced
and
Save
.
Inbox
1. Select
Menu, Messages
and press
OK
2. Select
Inbox
and press
OK
In this menu, you can view new or already read
Messages
.
Depending on the mode selected, the telephone vibrates or rings if you receive a new
Message
28
and you see this symbol on the default screen
in the display.
Press
Options
for the following functions:
View, Reply by SMS, Reply by MMS, Call sender,
Forward, Delete, Delete all
and
Sort by
Note: If the short message memory is full, the symbol blinks on the default screen.
Please delete some messages to be able to receive new ones again.
Outbox:
In the
Outbox
, unsent SMS messages are saved.
Drafts
In
Drafts
, you see your saved SMS messages.
Sent messages
In this menu, you can view already sent
Messages
. The following functions are available:
View, Forward, Delete, Delete all
and
Sort by
.
Please note MMS:
With the MMS function, you can send text messages and multimedia content such as pictures or audio files to another telephone.
29
Versus a conventional SMS, in the MMS settings you have the following additional options:
Add picture, Add sound, Add video, Add subject, Preview MMS, Slide option,
Advanced
and
Save
.
Settings
1. Select
Menu, Messages
and press
OK
2. Select
Settings
and press
OK
The following functions are available:
SMS (Settings)
You can define the SMS settings. The following functions are available:
SIM (Profile settings):
Here you can set, among others, the message service centre number (SMSC)
(dependent on the network operator) and other SMS settings.
Memory status:
With this option, the SMS memory status from your SIM card and your telephone are displayed.
Text msg. counter:
Counts the number of text message sent and received by you
Sent messages:
Switch on/off the storage of sent messages
Preferred storage
30
Select the storage location for the SMS
Telephone
or
SIM
Multimedia Messages
Data account:
Select the data account to be used
Common settings:
The following settings are available:
Compose,
Send, Retrieval, Preferred storage
and
Memory status
.
Important note:
In order to be able to send or receive
MMS messages, you require a memory card that supports the SL320, Micro SD cards with up to 8 GB memory.
In order to configure the MMS settings properly, please contact your network operator. You can create a data account in the following menu:
Settings – Connectivity – Data account.
Voicemail server
Voice mail is a network function. If a voice mail has been received, the receipt of a new message will be shown on the display of your telephone.
31
1. Select
Menu, Messages
and press
OK
2. Select
Settings
and press
OK
3. Select
SMS
and press
OK
4. Select
SIM
and press
OK
5. Select
Voicemail server
and press
OK
1. Select 1. <Empty> and press
Options
.
2. Select
Select
or
Edit
3. If you select
Edit
, enter a
name
and the
number
of your voice mailbox number.
4. On the default screen: Press and hold the number 1 and your telephone will call the corresponding number saved in the
Voicemail server
.
Note: This service must be supported by the network operator.
32
Call history
Call history
1. Select
Menu, Call logs
and press
OK
Your telephone stores logs for
Missed calls,
Dialed calls
, and
Received calls
The newest entries are at the top of the list.
Under
Option
, the following functions are available to you:
View, Call, Send text message, Send multimedia message, Save to Phonebook,
and
Delete
.
Delete call logs:
You can delete the logs from
Missed, Dialed
and
Received
calls individually or delete
all
call logs.
Call duration
In this menu, you can recall the call times.
33
Extras
Alarm
1. Select
Menu, Extras
and press
OK
2. Select
Alarm
and press
OK
Up to a maximum of 5 alarms can be set.
Setting the alarm:
1. Select an alarm and press
Edit
.
2. Setting the alarm:
On
or
Off
, (using the
“*” or “#” key)
Time, Snooze, Repeat
Volume, Alarm tone
and the
Alert type
.
3. To save the alarm, press
“Save” (M1 key)
.
When the alarm is sounding, press
Cancel (M1)
to stop it or the
Snooze (M2)
key. In this case, the alarm will snooze and will sound again after 5 minutes (default).
Events
Here you can enter reminders or events.
Add events:
Press
Options
and select
Add
.
Enter the desired details.
To save the event, press
Options
and
Save
.
In the Reminders menu, the following
Options
are available to you:
View, Add, Edit, Delete,
Delete overdue, Delete all, Go to date, View
34
uncompleted, Send vCalendar
and
Save as file
.
Calendar
1. Select
Menu, Extras
and press
OK
2. Select
Calendar
and press
OK
You can enter reminders in the calendar.
On the calendar interface, press the bottom and top arrow keys and the “+”/“#” keys to browse through different days.
Add event:
1. Press
Options
and select
Add event
.
2. Enter the desired details.
3. To save the event, press
Options
and
Save
.
In the Calendar, the following
Options
are available to you:
View, View all, Add event,
Delete event, Go to date, Go to today
and
Go to weekly view
.
Calculator
1. Select
Menu, Extras
and press
OK
2. Select
Calculator
and press
OK
35
With this function, you can use your mobile telephone as a pocket calculator. The pocket calculator can perform basic arithmetic functions.
Functions:
Enter the numbers (1 to 0).
Press # for the decimal point.
Press the arrow keys for +, -, x, ÷;
For the result, press
OK
, press and hold
Delete
to begin a new arithmetic problem.
Services
This is a service that is dependent on the network operator.
36
Multimedia
Camera
1. Select
Menu, Multimedia
and press
OK
2. Select
Camera
and press
OK
Taking photographs
Aim the camera lens at a location or an object and press the camera button (upwards arrow key) to take a photo. After the snapshot has been taken, the photo is shown on the display and automatically saved.
Important: To save several photos, please use a memory card (Micro SD card up to
8 GB).
In photo mode, the following functions are available to you:
Key
1
2
4
6
*
Function
Change image resolution
Image quality
White balance
Delay timer
Underexpose picture (EV-)
#
Overexpose picture (EV+)
Under
Option
you have access to the following functions:
37
Photos:
View the saved photos (in .jpg format). You can send and also receive the photos via
Bluetooth
.
The following functions are available to your under
Options
:
View, Browse style, Send,
Use as, Rename, Delete, Sort by, Delete all,
Storage
and
Image information.
Camera settings:
Defining of
, Shutter sound, EV (Over- or underexposure), Contrast, Frequency
and
Delay timer
.
Image settings:
Defining the
Image size
, and
Image quality
.
White balance:
Adapt to the ambient lighting conditions.
Scene mode:
Selection between
Auto
and
night
Effects:
Here you can add different photo effects.
Storage:
Select between:
Telephone
or
Memory card
.
Restore default settings:
Restores the default setting (factory setting).
(Phone Code:0000)
38
Show pictures
1. Select
Menu, Multimedia
and press
OK
2. Select
Image viewer
and press
OK
View the saved photos (in .jpg format). You can send and also receive the photos via
Bluetooth
.
The following functions are available to your under
Options
:
View, Browse style, Send,
Use as, Rename, Delete, Sort by, Delete all,
Storage
and
Image information.
Copy pictures to the computer
To copy the pictures you took with the SL320 camera onto the computer, proceed as follows:
1. Connect the telephone to the computer using the supplied micro USB cable.
2. After that, a menu appears on the telephone
-select “
Mass storage
” and confirm with
“
OK
”
3. The computer will recognize the telephone as
removable media
.
4. Using the Windows Explorer, now you can process the data as usual or copy it onto the computer.
Note:
The photos are located in the telephone in the folder “
Photos
”
39
File manager
Use the file manager to manage your files and folders in the phone memory and on the memory card.
1. Select
Menu, Multimedia
and press
OK
2. Select
File manager
and press
OK
Open:
To display the content of the selected folder.
New folder:
To create a new folder.
Rename
To rename a folder.
Delete:
To delete a folder.
Format
CAUTION! With this function, all data on the data storage device will be deleted.
40
Settings
Tone Settings
1. Select
Menu, Settings
and press
OK
2. Select
Tone Settings
and press
OK
The following tone settings are available:
Alert type, Ring type, Ringtone, Ringtone volume, Notifications, Text message volume,
Keypad, Keytone volume, Power on, Power off
and
System alert (System alert for error messages, weak battery, etc.)
.
Note:
In default mode, if you press and hold “
#
” for 2-3 seconds, “Silent mode” is activated; by pressing it again, “Silent mode” is deactivated.
SOS emergency number
The SOS function is a simple function that can save lives at a critical point in time. You can save up to 5 SOS contacts and one SMS.
These numbers, which you have to save one after another, are automatically dialed in case of emergency if you press the emergency call button on the back of the mobile phone.
During an emergency call, an audio warning signal sounds so that the person being called
41
knows that it is an emergency and it also sends an emergency SMS! If the first number cannot be reached, the next number is automatically dialed, etc.
If no emergency call number is saved or your telephone card is empty or you are in a foreign network (e.g. roaming is not activated), you can still call 112 or other emergency call numbers using the numeric keys.
If the SOS call is answered, the telephone switches to hands-free mode.
Note:
To stop or cancel the emergency call, you must press the
right mouse button
or the
SOS button
.
When using a Prepaid card: Always ensure for sufficient funds on your prepaid card, since private emergency call numbers cannot be dialed without sufficient funds.
Outside of your network operator’s home network, the international SOS 112 can usually still be called.
Attention: If you save emergency call numbers such as rescue, police, fire department, etc., you must clarify this in advance with the respective institutions. No liability is assumed for possibly incurred costs if you call by mistake.
42
SOS settings
1. Select
Menu, Settings
and press
OK
2. Select
SOS Settings
and press
OK
The following menu items are available:
SOS Status
You can switch the
SOS Status
on/off.
SOS number
Define a maximum of 5
SOS numbers
and their priority sequence.
SOS SMS
If SOS mode is started, this text message will be sent to the
SOS numbers
. The text can be changed as desired (max. 50 characters).
SOS Information
Brief description of the SOS emergency call function
43
One touch keys M1 M2
1. Select
Menu, Settings
and press
OK
2. Select
One touch keys M1 M2
and press
OK
Here you can edit the M1 and M2 numbers.
By pressing and holding (2-3 seconds) the
M1 or M2 button in default mode, the SL320 dials the allocated telephone number.
Phone settings
1. Select
Menu, Settings
and press
OK
.
2. Select
Phone settings
and press
OK
.
The following menu items are available:
Time and Date
Set the
Time zone, Date
and
Time
.
Language
In this menu, you can set the display language.
Preferred input method
In this menu, you can define your preferred input method (
Smart DE, de, ABC, abc, 123
and other languages).
Display Extras
Background image:
Select your own wall paper.
44
Auto. Keypad lock
You can set the telephone such that the keypad automatically locks after a preset time period.
Power on display
Select your own wallpaper once the telephone is booted.
Power off display
Select your own wallpaper while the telephone is switching itself off.
Date and Time
In this menu, you can show/hide the time and date display in default mode.
Display
LCD illumination
Setting the brightness and display illumination duration
45
Call settings
1. Select
Menu, Settings
and press
OK
2. Select
Call settings
and press
OK
Depending on the network operator, you can use the following services:
Caller ID
Here you can define whether your number is withheld or visible for the person being called.
Call waiting
You will be informed during a call when another call come in. Press “OK” (M1 button) to answer the call. The first call remains on the other line; if you would not like to answer the call, press the Hangup key.
Call forwarding
With this network service, you can redirect incoming calls to another telephone specified by you. Several call forwarding actions can be activated at the same time.
46
Call barring
With this network service, you can restrict your calls.
Advanced
Automatic redial
If the line of the person you are calling is busy or if the call was not answered, an automatic redial action can be initiated.
Call duration reminder
A signal tone sounds during the call
Answer mode
Select the method you would like to use to answer the call.
Network settings
1. Select
Menu, Settings
and press
OK
2. Select
Network settings
and press
OK
Depending on the network operator, you can use the following services:
Network selection:
Here you can:
New search, Network selection
and
Selection mode
GPRS Connection
A GPRS connection is required to send MMS messages.
47
GPRS-preferred
The SL320 cannot simultaneously send or receive an MMS and make talk on the telephone; set the priority to whichever connection you prefer.
Security settings
1. Select
Menu, Settings
and press
OK
2. Select
Phone settings
and press
OK
.
The following menu items are available:
SIM security
PIN lock
When switching the prompt for a PIN
on
or
off
, you will be prompted to enter the correct
PIN code
of the
SIM card
. You can change the PIN code of the
SIM card
at any time.
Changing PIN/PIN2
To the change the password, enter current password and then the new passwords:
PIN
or
PIN2
48
Telephone security:
Telephone lock
While powering the PIN prompt
on
or
off
, you will be prompted to enter the correct
Phone password
of the telephone.
Changing the password
To change the password, enter the actual password and then the new password 2x.
Auto. Keypad lock
You can set the telephone such that the keypad automatically locks after a present time period.
Connections:
1. Select
Menu, Settings
and press
OK
2. Select
Connections
and press
OK
The following menu items are available:
Bluetooth
With Bluetooth, you can connect your telephone with a compatible Bluetooth device.
To go directly to the menu, press the
“Downwards Arrow key” on the default screen.
The following functions are available:
Bluetooth:
49
Press M1 to activate or deactivate the
Bluetooth function.
Visible
You can set your telephone so that it can be recognized by other Bluetooth devices.
Recognized devices:
In this menu, you can establish a connection with already recognized Bluetooth devices.
Search for audio device
In this menu, you can establish a connection with Bluetooth-enabled audio accessories.
Change device name:
Change the names of the Bluetooth devices.
Advanced
In this menu, you can: Define the
Audio path and Storage
and under
My Addresses
you see the MAC address of your telephone.
Search for Bluetooth audio device
1. To begin a search for another Bluetooth device, press
OK
.
2. Select the desired device and press
Pair
.
3. If a connection with another Bluetooth device is established, you require a
Password
. Confirm the password with
OK
.
Under
Options
, the following functions can be found:
Connect, Rename, Authorize, Delete
and
Delete all
Data account
In order to be able to use the MMS function, you must create a data account.
50
The configuration of a data account is dependent on the data of your network operator.
Important: Please contact your network operator and have the configuration data for the MMS Settings sent to you.
Restore factory settings
1. Select
Menu, Settings
and press
OK
2. Select
Restore factory settings
and press
OK
With this function, you can reset the telephone settings to the factory default configuration.
You have to enter the password to restore the factory settings. The default password is:
0000.
Specifications:
Dual Band Network: GSM 900/1800
Battery: Li-ion 3.7V - 1100mAh
Dimensions:
Standby time:
123 x 57 x 12mm
< 320 hours*
Talk time: < 420 minutes*
* The operating life of the battery is dependent on the SIM card, network, settings applies and usage as well as the environment.
51
FAQ
If your phone appears the questions frequently, please refer to the answers as follows. After that, you cannot solve the questions, please contact with the mobile phone dealers or network operator.
Can’t turn the phone on:
Check battery installation, please install battery correctly.
Check if battery level is low, change a battery or charge the battery.
Check if entered incorrect PIN code 3 times in a row.
If yes, the phone is locked, then you should enter your PUK code (please contact your network operator for your
PUK code).
SIM error:
Is the SIM card dirty? Please clean it.
Try and reinstall the SIM card.
Is the SIM card damaged? Please contact your network operator.
Weak signal or no signal:
You may be in a location where the reception is bad, such as tunnel or cellar, please relocate and try again.
You can try turning around slightly or get near the window if you are in a room.
52
Please contact your network operator, if you still have a weak signal or no signal.
Bad talking quality:
Weak signal? See: Weak signal or no signal.
Check if battery if battery is low. Charge the battery or change the battery.
Use the up volume key to adjust the microphone volume during a call.
Can’t make a call:
Check if you enter the correct number and press green key.
Check if you set call barring, if yes, please cancel it.
Check if the SIM card is registered in the network.
If your SIM card is a prepaid card, please make sure there is enough money on the card.
Can’t receive calls:
Is the SIM card registered in the network?
Check if your phone is turned on.
Check if screens shows no signal, if yes, see: Weak signal or no signal.
Check if you set call barring, if yes, please cancel it.
Screen is dark:
Check if battery if battery is low. Charge the battery or change the battery.
Adjust the wallpaper.
53
Your phone may be affected with damp, keep it dry.
PIN locked:
Check if entered incorrect PIN code 3 times in a row.
If yes, the phone is locked, then you should enter your PUK code (please contact your network operator for your
PUK code).
Tips: if all suggests and solutions can’t solve your problem, please check Customer
Service on www.beafon.com. Please do not disassembly or repair your phone without professional guide.
Battery
Your phone is powered by a rechargeable battery.
Note that a new battery's full performance is achieved only after two or three complete charge and discharge cycles! The battery can be charged and discharged hundreds of times but it will eventually wear out.
When the operating time (talk-time and standby time) is noticeably shorter than normal, it is time to buy a new battery.
Use only batteries approved by the phone manufacturer and recharge your battery
54
only with the chargers approved by the manufacturer.
Unplug the charger when not in use. Do not leave the battery connected to a charger for longer than 10 days, since overcharging may shorten its lifetime. If left unused a fully charged battery will discharge itself over time.
Temperature extremes can affect the ability of your battery to charge.
Use the battery only for its intended purpose.
Never use any charger or battery which is damaged.
Do not short-circuit the battery.
Accidental short-circuiting can occur when a metallic object (coin, clip or pen) causes direct connection of the + and - terminals of the battery (metal strips on the battery) for example when you carry a spare battery in your pocket or purse.
Short-circuiting the terminals may damage the battery or the connecting object.
Leaving the battery in hot or cold places, such as in a closed car in summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15°C and
25°C. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged. Batteries
55
performance is particularly limited in temperatures well below freezing.
Do not dispose of batteries in a fire!
Dispose of batteries according to local regulations (e.g. recycling).
Do not dispose as household waste.
Do not charge your mobile phone if the battery is not installed.
Phone
Your phone is a product of superior design and craftsmanship and should be treated with care.
The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years.
Keep the phone and all its parts and accessories out of the reach of small children.
Keep the phone dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits.
Do not use or store the phone in dusty, dirty areas. Its moving parts can be damaged.
Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
56
Do not store the phone in cold areas.
When it warms up (to its normal temperature), moisture can form inside, which may damage electronic circuit boards.
Do not attempt to open the phone. Nonexpert handling may damage it.
Do not drop, knock or shake the phone.
Rough handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the phone. Do not paint the phone. Paint can clog the moving parts and prevent proper operation.
Use only the supplied or an approved replacement antenna. Unauthorised antennas, modifications or attachments could damage the
phone and may violate regulations governing radio devices.
All of the above suggestions apply equally to your phone, battery, charger or any accessory. If any of them is not working properly, take it to your nearest qualified service facility.
57
For your safety
Read these simple guidelines. Breaking the rules may be dangerous or illegal.
Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger.
Road safety comes first
Do not use a hand-held phone while driving.
Switch off in aircraft
Wireless devices interference in aircraft. can cause
Switch off in hospitals
Follow any regulations or rules.
Switch the phone off near medical equipment.
Switch off when refuelling
Do not use the phone at a refuelling point. Do not use near fuel or chemicals.
Interference
All wireless phones may get interference, which could affect performance.
58
Traffic Safety:
Do not use a hand-held telephone while driving a vehicle. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop. Remember road safety always comes first!
Operating environment:
Remember to follow any special regulations in force in any area and always switch off your phone whenever it is forbidden to use it, or when it may cause interference or danger.
Use the phone only in its normal operating positions.
Parts of the phone are magnetic. Metallic materials may be attracted to the phone, and persons with a hearing aid should not hold the phone to the ear with the hearing aid.
Always secure the phone in its holder, because metallic materials may be attracted by the earpiece.
Do not place credit cards or other magnetic storage media near the phone, because information stored on them may be erased.
59
Electronic devices:
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, certain electronic equipment may not be shielded against the RF signals from your wireless phone.
Pacemakers:
Pacemaker manufacturers recommend that a minimum separation of 20 cm (6 inches) be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology
Research.
Persons with pacemakers:
Should always keep the phone more than
20 cm (6 inches) from their pacemaker when the phone is switched on.
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to minimise the potential for interference.
If you have any reason to suspect that interference is taking place, switch off your phone immediately.
Hearing aids:
60
Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your network operator.
Other medical devices:
Operation of any radio transmitting equipment, including cellular phones, may interfere with the functionality of inadequately protected medical devices.
Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your phone in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Posted facilities:
Switch your phone off in any facility where posted notices so require.
Potentially explosive atmospheres:
Switch off your phone when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
Users are advised to switch off the phone when at a refuelling point (service station).
61
Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats; chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.
Vehicles:
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (e.g. electronic fuel injection systems, electronic anti-skid (anti-lock) braking systems, electronic speed control systems, air bag systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.
62
For your safety
Certification information (SAR):
This model phone meets the EU requirements for exposure to radio waves.
The exposure standard for mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The
SAR limit recommended by The Council of the European Union is 2.0 W/kg. Tests for
SAR have been conducted using standard operating positions with the phone transmitting at its highest certified power level in all tested frequency bands.
The highest SAR value for this device when tested at the ear was 0,476W/Kg.
If you want a copy of the Declaration of contact us: Conformity, [email protected] please
While there may be differences between the
SAR levels of various phones and at various positions, they all meet the EU requirements for RF exposure.
63
Information
Liability Disclaimer:
Bea-fon Mobile GmbH shall not bear any liability for any relevant, indirect, special, incidental, or inevitable injuries caused by using of this product, including injuries which have been considered, or unconsidered, likely to happen.
For any losses caused by natural disasters (such as earthquake, flood, etc.) or any acts or accidents (including deliberate or accidental misuses by the user under these accidents or other unusual circumstances) which are beyond our liability scope, non-responsibility should be accounted on us.
64
Information:
SL320 distributed by Beafon
For more Information, please visit the Beafon Homepage: www.beafon.com or contact us: [email protected]
Address:
V1.2
BEAFON MOBILE GmbH
4722 Peuerbach
Enzing 4
Austria
65
Download
Advertisement