Leitor
Zebra DS3508
O leitor Symbol DS3508 omnidirecional é um equipamento robusto que oferece captura de dados abrangente e de alto desempenho para ambientes industriais adversos. Projetada com inovadora tecnologia de imagem digital, trabalha com extrema rapidez e precisão de captura dos dados de códigos de barra 1D e
2D. www.bztech.com.br
DS3508 Poster
BLACK
PANTONE 285
SYMBOL DS3508
Quick Start Guide
http://www.motorola.com/ds3508 See Product Reference Guide for detailed information
2
1
4
3
IntelliStand
ACCESSORIES
Forklift Holder
1 Tether Plate
2 LED Indicators
3 Scan Window
4 Scan Trigger
CORD ATTACHMENT
3 4 1 2
NOTE: Cables may vary depending on configuration
RS-232
USB
HOST INTERFACES
Keyboard Wedge
IBM 46XX
Perforation
Scanner not working
No power to scanner
Check system power; ensure power supply, if required, is connected
Incorrect interface cable used
Ensure that correct interface cable is used
TROUBLESHOOTING
Interface/power cables are loose
Check for loose cable connections
Scanner not decoding bar code
Scanner not programmed for bar code type
Bar code unreadable
Ensure scanner is programmed to read type of bar code being scanned
Ensure bar code is not defaced; try scanning test bar code of same bar code type
Distance between scanner and bar code incorrect
Move scanner closer to or further from bar code
Scanner decoding bar code, but data not transmitting to host
Scanner not programmed for correct host interface Interface cable is loose
Check scanner host parameters or edit options Check for loose cable connections
Scanned data incorrectly displayed on host
Scanner not programmed for correct host interface
Check scanner host parameters or edit options
Set Defaults
SYMBOL DS3508 PROGRAMMING BAR CODES
IBM 46XX Host Types Keyboard Wedge Host Types
SET DEFAULTS
USB Host Types
PORT 5B IBM PC/AT and IBM PC COMPATIBLE
HID KEYBOARD EMULATION
PORT 9B
IBM HAND-HELD USB
RS-232 Host Types
Scan to Add an Enter Key
(Carriage Return/Line Feed)
STANDARD RS-232 NIXDORF RS-232 MODE B SCAN OPTIONS
ICL RS-232
NIXDORF RS-232 MODE A
FUJITSU RS-232
OPOS/JPOS
<DATA><SUFFIX>
ENTER
SYMBOL DS3508
DS3508 Poster
BLACK
PANTONE 285
2
1
4
3
Aiming
OPTIMUM SCANNING POSITIONS
Proper Scanning
0 1 2 3 4 5 0 1 2 3 4 5
0 1 2 3 4 5 0 1 2 3 4 5
1 Tether Plate
2 LED Indicators
3 Scan Window
4 Scan Trigger
OPTIMUM UPRIGHT BODY POSTURE
Optimum Body Posture for Low Scanning
ALTERNATE LEFT
AND RIGHT KNEES
AVOID EXTREME WRIST ANGLES
AVOID EXTREME
WRIST ANGLES
BEEPER INDICATIONS
Standard Use
Low/medium/high beep
Power up
Short high beep
Bar code decoded
[if decode beeper enabled]
4 long low beeps
Transmission error detected; data is ignored
Parameter Menu Scanning
High/low/high/low beep High/low beep
Successful parameter setting
Correct programming sequence performed
Off
Scanner is on and ready to scan, or no power to scanner
Low/high beep
Incorrect programming sequence or
Cancel bar code scanned
LED Indications
Green
Bar code is successfully decoded
Red
Transmission error
OPTIMUM BODY POSTURE
Optimum Body Posture for
Extended Range Scanning
AVOID BENDING
AVOID REACHING
72-67131-02 Revision A June 2004
SYMBOL DS3508
© 2010 MOTOROLA, INC. All rights reserved.
Motorola reserves the right to make changes to any product to improve reliability, function, or design. Motorola does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, apparatus, machine, material, method, or process in which Motorola products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Motorola products.
MOTOROLA, the Stylized M Logo and Symbol and the Symbol logo are registered trademarks of Motorola, Inc. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged.
Warranty
For the complete Motorola hardware product warranty statement, go to: http://www.motorola.com/enterprisemobility/warranty.
Service Information
If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Motorola Enterprise Mobility Support at: http://supportcentral.motorola.com.
For the latest version of this guide go to: http://supportcentral.motorola.com.
Local Contact:
Recommended Usage Guide
REGULATORY INFORMATION
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety programs to prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Regulatory Information
This guide applies to model number DS3508. This device is approved under the
Symbol Technologies brand: Symbol Technologies, Inc., is the Enterprise Mobility business of Motorola, Inc. (“Motorola”).
All Motorola/Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required.
Local language translations are available at the following website: http://www.motorola.com/enterprisemobility/support.
Any changes or modifications to Motorola/Symbol Technologies equipment, not expressly approved by Motorola/Symbol Technologies, could void the user’s authority to operate the equipment.
CAUTION:
Only use Motorola/Symbol approved and UL Listed accessories.
Power Supply
Use ONLY a LISTED Motorola, Type no. 50-14000 (5Vdc/0.5A minimum), or
PWRS-14000 (5Vdc/0.5A minimum), Direct Plug-in Power Supply, marked Class 2 or LPS (IEC60950-1, SELV). Use of alternative Power Supply will invalidate any approvals given to this device and may be dangerous.
Japan (VCCI) - Voluntary Control Council for Interference
この装置は、情報処理装置等電波障害自主規制協議会（ＶＣＣＩ）の基準に基づくクラスB情報技術装置です。この
装置は、家庭環境で使用することを目的としていますが、この装置がラジオやテレビジョン受信機に近接して使用さ
れると、受信障害を引き起こすことがあります。 取扱説明書に従って正しい取り扱いをして下さい。
Radio Frequency Interference Requirements
Note: This equipment has been tested and
Tested to comply with FCC Standards
FOR HOME OR OFFICE USE found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency Interference Requirements – Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Marking and European Economic Area (EEA)
Statement of Compliance
Motorola/Symbol, hereby declares that this device is in compliance with all the applicable Directives, 2004/108/EC and 2006/95/EC.. A Declaration of Conformity may be obtained from http://www.motorola.com/doc.
Laser Devices
Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50, June 24, 2007 and EN60825-1:2007 and IEC 60825-1(ED.2).
Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful.
Scanner Labeling
Korean Warning Statement for Class B ITE
COMPLIES WITH 21 CFR1040.10 AND 1040.11 EXCEPT FOR DEVIATIONS
PURSUANT TO LASER NOTICE No. 50, DATED JUNE 24, 2007, AND
EN60825-1:2007 AND IEC 60825-1(ED.2).
Motorola, Inc.
One Motorola Plaza Holtsville, New York 11742-1300, USA
MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their respective owners.
© Motorola, Inc. 2010
72-124802-01 Rev B October 2010 72-67131-02 Revision A June 2004
SYMBOL DS3508 http://www.motorola.com/ds3508
CAUTION- CLASS 2 LASER LIGHT WHEN OPEN. DO NOT
STARE INTO THE BEAM. ATTENTION- LUMIÉRE LASER
EN CAS D'OUVERTURE. NE PAS REGARDER DANS LE FAISCEAU.
VORSICHT- LASERLICHT KLASSE 2, WENN ABDECKUNG GEÖFFNET.
NICHT IN DEN STRAHL BLICKEN.
注 意：打开时及联锁失效时有激光辐射 勿直视光束
Recommended Usage Guide
