Pure360 Integration Agent
Installation & User Guide
Introduction
This is a technical document that shows you how to install and configure the Pure360 Integration Agent - a Java based middleware integration solution.
The primary function of the Agent is to provide integration between a local CRM and the online Email Marketing
Platform.
The Agent software has been designed in a modular fashion – allowing for additional integration support by way of installing additional Integration modules.
While the core Agent software has been written using the Java programming language, integration modules may utilize non-Java code depending upon the functionality required. When this is the case, documentation of any pre-requisites should be supplied alongside the module.
A dedicated Java 7 Virtual Machine is bundled alongside the agent software to provide a sandboxed environment with minimal impact to the host operating system.
How to install and configure The Integration Agent
Although a relatively simple set up, marketers may wish to provide this documentation to their IT or development team for help with implementation. It is recommended a user with System Administration privileges perform the installation of the agent for a successful deployment.
Recommended Minimal System Requirements
Windows Server 2008 R2
Windows Server 2008 Service Pack 2
Windows Server 2003 Service Pack 2
Windows 7
Windows Vista Service Pack 2
Installation steps
Install the Agent software
1. The installation script can be started by running the supplied setup executable:
Integration.Agent.1.0.x.Setup.exe
2. The first screen will ask which Start Menu folder to use. The default value should already be selected as
“Integration Agent”.
3. Click next to start installing the software. The software will be installed into the default Windows 32-bit
“Program Files” folder on the machine.
4. During the setup process, the installer will silently install and start a Windows Service.
5. Finally a summary screen will display a confirmation of the installation procedure.
Installation Notes:
The Integration Agent application files will be installed to a folder called Integration Agent within the default 32bit Program Files folder on the machine.
In turn, application data will be written to a folder called Integration Agent within the default ProgramData folder on the machine.
A shortcut to launch the Integration Agent Monitor and a shortcut to uninstall the Integration Agent Monitor will be created in the Windows Start Menu. It is recommended to use these two links rather than running them directly from the Program Files folder.
1
Pure360 Integration Agent
Installation & User Guide
Agent Configuration
The Agent Monitor GUI can be launched from the Start Menu folder. The monitor allows a user to monitor the scheduling process and conduct basic profile management.
Create a new integration profile
1. To create a new Integration Profile choose File->New Profile from the menu. The New Profile screen should appear allowing a user to input credentials for a valid Response profile as shown below:
When the save button is clicked, these credentials will be verified with the online Response system. Please note that a system profile should be used for all integration credentials.
2. After successfully validating the credentials, the Agent will display a list of available Integration Modules that are available for the validated Response profile:
2
Pure360 Integration Agent
Installation & User Guide
3. After selecting an Integration Module and clicking the ‘ok’ button, a module configuration page will be displayed as shown in the image below:
Each Integration Module will have its own set of configuration properties. Please see relevant documentation for help in configuring these.
Adding a second profile
The Integration Agent supports multiple Integration Profiles. However, only one type of Integration is allowed per
Response profile. To add a further Integration Profile, follow the same steps as described for adding a new Integration
Profile above.
Remove an existing profile
1. To remove an existing Integration Profile, firstly make sure the profile to be removed is selected in the left hand window:
2. Click the ‘delete’ button to permanently remove the profile from the system.
3
