Sven AP-B350MV Headphone User Manual

Add to My manuals
7 Pages

advertisement

Sven AP-B350MV Headphone User Manual | Manualzz

Wireless Stereo Headphones with Microphone

USER’S MANUAL

AP-B350MV

www.sven.fi

ENG

User’s Manual

Congratulations on your purchase of the SVEN stereo headphones!

COPYRIGHT

© 2014. SVEN PTE. LTD. Version 1.0 (V 1.0).

This Manual and information contained in it are copyrighted. All rights reserved.

APPLICATION

SVEN AP-B350MV wireless stereo headphones with microphone are designed for operation with PC, notebookes and other mobile devices by means of data transfer via Bluetooth protocol. They can be also used in internet tele- phony, during video conferences, in multimedia applications, in interactive games, for speech recognition and foreign language teaching.

PACKAGE CONTENTS

Stereo headphones – 1 pc

Detachable audio cable – 1 pc

USB power cord to micro USB – 1 pc

User’s Manual – 1 pc

Warranty card – 1 pc

SAFETY PRECAUTIONS

Don’t use the stereo headphones while driving.

Don’t use the stereo headphones at high volume for a long period of time

(more than 15 minutes), as this may cause hearing impairment.

SPECIAL FEATURES

4.1 Bluetooth wireless signal transmission

Track switching control possibility

Call acceptance function

Wired/wireless audio signal transmission

Battery peration time up to 10 hours

Radius of operation up to 10 m

1

ENG

Wireless Stereo Headphones with Microphone

DESCRIPTION a Power: headphones on/off and call control button b Control joystick c LED indicator d Micro USB jack for battery charging e Audio cable jack f Microphone a b c d e f

CONNECTION AND OPERATION

Attention! The built-in battery must be charged completely prior to the headphones application.

Fig. 1. Headphones description

Headset charging

Connect the headset to a USB port of PC or USB charger using

USB/micro USB cable (included). During battery charging the indicator c is red.

When the device is charged in full, the indicator c lights up blue.

There is a short periodic double beep signal when the battery charge level is low and the LED indicator c will be blue or red alternately.

The battery is used in the headphones as an integral part of the device, therefore do not try to extract or replace it, because this can result in the warranty cancellation or the device damage.

Device switching on/off

In order to turn on the headset press and hold the button a before you hear a beep signal. When the device is turned on, the LED indicator c will start blinking blue. In order to turn off the device, press once more and hold the button a before you hear a beep signal. When the device is turned off, the LED indicator c will blink red.

2

ENG

User’s Manual

Control buttons

When connected to a telephone:

in order to receive an incoming call press the button a; press the button a once again to finish the call;

when the button a is pressed shortly twice, the call function of the last number dialed* is switched on;

when the button a is pressed shortly three times, the call rejection func- tion* is switched on*;

long displacement of the joystick b (+/-) – change of the volume level;

short displacement of the joystick b ( , ) – switching between musical tracks of the media player of a connected device**;

short press of the joystick b ( ) – Playback/Pause of the media player of a connected device**.

* Depending on telephone/smartphone configuration.

** Depending on a program of the media player.

Bluetooth technology

Wireless data transfer via the Bluetooth protocol enables to connect wire- less headphones to compatible devises. Maximum radius of action of data transfer is 10 m. Such obstacles as walls or other electronic devices can interfere with the signal transfer.

Headset to a device interfacing

It is necessary first to interconnect the device with a signal source (see the connection diagram in Fig. 2) to transfer signals via Bluetooth. To do this, turn on the headset, without releasing the button a waigt for starting the search mode – the LED indicator c will alternate blue light with red one.

It is necessary to select the search mode of devices with Bluetooth on a sig- nal source (telephone, notebook, smartphone, etc.). SVEN AP-B350MV” massage will be displayed on the screen, which is to be connected to*.

3

ENG

Wireless Stereo Headphones with Microphone

If connection is successful, there will be a short beep signal in the head- phones; the search mode indication on the headphones is over. If no devices is connected, the search mode will be turned off automatically in three mi- nutes and the headphones will go to the standby mode. If the device inter- facing has been failed, it is necessary to switch the system in the search mode

once more (turn off and on)**.

PC Phone Headphones

Fig. 2. Connection diagram

The indicator c on the headphones blinks blue short during the data exchange with a device connected via Bluetooth.

* You might have to enter “0000” code to connect some models of devices via

Bluetooth.

** If the item has been already registered in the device list of a source, then the second search mode activation is not obligatory. Choose only the item name

“SVEN AP-B350MV” and the “connect” command on the source.

The use in the wired mode

The device can be used as stereo headphones, if you connect them to a sound source with the included cable to jack e. In this case it is not necessary to turn on/off them. However, in this mode control elements and the microphone on the cup will not be active.

4

ENG

User’s Manual

TECHNICAL SPECIFICATIONS

Parameter, measurement unit

Sensitivity, dB

Frequency range, Hz

Impedance, Ohm

Membrane, mm

Connection type

Bluetooth supported profiles

Radius of operation, m

Operation time, h

Connector type

Cable lenght, m

Weight, g

Value headphones: 105 ± 3 microphone: -58 ± 2 headphones: 20 – 20,000 microphone: 30 – 16,000

32

Ø 40

4.1 Bluetooth

HSP, HFP, A2DP, AVRCP up to10 up to10

Ø 3.5 mm (3 pin) plug

1.2

150

Notes:

Technical specifications given in this table are supplemental information and cannot give occasion to claims.

Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.

Technical support is on www.sven.fi.

5

Wireless Stereo Headphones with Microphone

Модель: AP-B350MV

Импортер в России: ООО «СКАНДИТРЕЛ», 111024,

РФ, г. Москва, ул. Авиамоторная, д. 65, стр. 1.

Уполномоченная организация в России:

ООО «РТ-Ф», 105082, г. Москва, ул. Фридриха

Энгельса, д. 75, стр. 5.

Условия гарантийного обслуживания смотрите в гарантийном талоне или на сайте www.sven.fi.

Гарантийный срок: 12 мес. Срок службы: 2 года.

Производитель: «СВЕН ПТЕ. Лимитед»,

176 Джу Чиат Роуд, № 02-02, Сингапур, 427447.

Произведено под контролем «Свен Скандинавия

Лимитед», 48310, Финляндия, Котка,

Котолахдентие, 15. Сделано в Китае.

Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road,

№ 02-02, Singapore, 427447. Produced under the control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie,

Kotka, Finland, 48310. Made in China.

® Registered Trademark of Oy SVEN

Scandinavia Ltd. Finland.

AP-B350MV

advertisement

Related manuals

Download PDF

advertisement