RCD1201
ORIGINAL INSTRUCTIONS
Drill Driver
Important!
It is essential that you read the instructions in this manual before operating this machine.
Subject to technical modifications.
Safety
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool’’ in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
WORK AREA SAFETY
■ Keep work area clean and well lit. Cluttered or dark areas invite accidents.
■
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
■
Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
ELEcTRIcAL SAFETY
■
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
■
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
■ Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
■
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
■
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
■
If operating a power tool in a damp location is unavoidable, use a residual current device (RcD)
protected supply. Use of an RCD reduces the risk of electric shock.
PERSONAL SAFETY
■
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
■
Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
■
Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
■
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
■
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool in unexpected situations.
■
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
■
If devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can reduce dust-related hazards.
POWER TOOL USE AND cARE
■
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
■
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
■
Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories or storing
power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
■
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
■
Maintain power tools. check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
1
Safety
■ Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
■
Use the power tool, accessories and tool bits etc, in accordance with these instructions, taking into account the working conditions and the work to
be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
BATTERY TOOL USE AND cARE
■
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
■
Use power tools only with specifically designated
battery packs. Use of any other battery packs may create a risk of injury and fire.
■
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
■
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or burns.
SERVIcE
■
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
■ Drilling in ceramics, plastics, fiberglass and laminates
■ Drilling in metals
MAINTENANcE
■ When servicing, use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage.
■ Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
■ Do not attempt to modify this tool or create accessories not recommended for use with this tool.
ENVIRONMENTAL PROTEcTION
Recycle raw materials instead of disposing of as waste. The machine, accessories and packaging should be sorted for environmental-friendly recycling.
LED INDIcATOR
Battery charge
66% - 100%
LED colour
Green + Yellow + Red
33% - 66% Yellow + Red
< 33% Red
NOTE: If only the red LED indicator is illuminated, it means the battery power is low. The battery needs to be recharged.
SPEcIAL SAFETY RULES
■ Wear ear protectors when drilling. Exposure to noise can cause hearing loss.
■ Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
■
Hold power tool by insulated gripping surfaces, when performing an operation where the cutting
accessory may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
■ When not in use, all tools should be disconnected from power source.
BATTERY OVERLOAD PROTEcTION
This tool is designed to protect the battery from overloading.
When overloading is detected, the tool will automatically switch off. To resume operation, switch the tool off and on again. If the tool fails to operate, it means battery pack is discharged and should be recharged in a compatible charger.
SYMBOL
V
Safety alert
Volts
Revolutions per minute
INTENDED USE
You may use this product for the purposes listed below:
■ Drilling in all types of wood
Direct current
2
Please read the instructions carefully before starting the machine.
Wear ear protection
Wear eye protection
Recycle
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
IcONS IN THIS MANUAL
Safety
Getting started
Information
Lock
Unlock
Do not touch rotating part
Safety
3
4
1 2
1
Getting started
2
4
0
2
I
16
I
I
I
12
I I
I
4
I
8
I
I I
5
100% 0%
3
Getting started
5
PRODUcT SPEcIFIcATIONS
Voltage
Chuck
Switch
No-load speed (drill mode)
Clutch
Maximum torque
Maximum spade bit
Weight - excluding battery pack
12 V
0.8 - 10 mm
Variable speed
715 min1
22 positions
25 Nm
25 mm
0.89 kg
BATTERY AND cHARGER
Model
RCD1201
Compatible battery pack (not included)
BSPL1213
Compatible charger
(not included)
BCL12L1H
961067887-01
