Lumens PS 400 Digital Visualizer User Manual

PS400
Digital Visualizer
User Manual
English - 0
Table of Content
COPYRIGHT INFORMATION ................................................................................3
CHAPTER 1 PRECAUTIONS ................................................................................4
SAFETY PRECAUTIONS ............................................................................................5
FCC WARNING .......................................................................................................5
EN55022 (CE RADIATION) WARNING ....................................................................5
CHAPTER 2 PACKAGE CONTENT.....................................................................7
CHAPTER 3 PRODUCT OVERVIEW ...................................................................8
3.1
3.2
3.3
3.4
3.5
FRONT VIEW/ REAR VIEW..............................................................................8
I/O CONNECTOR.............................................................................................9
DIP SWITCH SETTING ..................................................................................10
CONTROL PANEL..........................................................................................11
REMOTE CONTROL .......................................................................................12
CHAPTER 4 INSTALLATION ..............................................................................13
4.1
4.2
SETUP THE DIGITAL VISUALIZER .................................................................13
POWERING ON THE DIGITAL VISUALIZER .....................................................13
CHAPTER 5 OPERATION....................................................................................14
5.1 BASIC FUNCTIONS ........................................................................................14
5.1.1 Source ...................................................................................................14
5.1.2 Zoom In/Out .........................................................................................14
5.1.3 Auto Focus............................................................................................15
5.1.4 Brightness .............................................................................................15
5.1.5 Lamp .....................................................................................................15
5.1.6 Photo/Text/Gray....................................................................................16
5.1.7 Capture..................................................................................................16
5.1.8 Accessing into OSD Menu....................................................................16
5.2 ADVANCED FUNCTIONS ...............................................................................17
5.2.1 Play Back Captured Images .................................................................17
5.2.2 Delete Captured Images .......................................................................17
5.2.3 Customized Function ( F1/F2).............................................................17
5.2.4 Auto Erase.............................................................................................17
5.3 OSD FUNCTION INTRODUCTION ..................................................................18
5.3.1 Using OSD Menu..................................................................................18
5.3.2 OSD Menu ............................................................................................19
5.4 OTHER FUNCTIONS ......................................................................................20
5.4.1 Viewing Remote Objects .......................................................................20
5.4.2 Viewing Positive/Negative Images .......................................................20
English - 1
5.4.3 Using USB and RS232..........................................................................20
5.5 STORAGE AFTER USE ...................................................................................21
CHAPTER 6 Q & A ................................................................................................22
English - 2
Copyright Information
Copyright © Lumens Digital Optics Inc. All rights reserved.
Lumens Digital Optics Inc. is in process the trademark registration of Lumens.
No part of this document may be copied, reproduced, or transmitted by any means,
without prior written permission from Lumens Digital Optics Inc. Except
documentation kept by the purchaser for backup purposes.
In the interest of continuing product improvement, Lumens Digital Optics Inc.
reserves the right to change product specifications without notice. Information in this
document may change without notice.
Products and corporate names appearing in this manual may or may not be
registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer: Lumens Corporation shall not be liable for technical or editorial errors or
omissions
English - 3
Chapter 1 Precautions
Always follow these safety instructions when setting up and using the Digital
Visualizer:
1. Do not place the Digital Visualizer on an unstable trolley, stand or table.
2. Do not use the Digital Visualizer near water or source of heat.
3. Use attachments only as recommended.
4. Use the type of power source indicated on the Digital Visualizer. If you are not
sure of the type of power available, consult your dealer or local electricity
company for advice.
5. Place the Digital Visualizer can be easily unplugged.
6. Always take the following precautions when handling the plug. Failure to do
so may result in sparks or fire.
„ Ensure the plug is free of dust before inserting it into a socket.
„ Ensure that the plug is inserted into the socket securely.
7. Do not overload wall sockets, extensions leads or multi-way plug boards as
this may cause fire or electric shock.
8. Do not place the Digital Visualizer where the cord can be stepped on as this
may result in fraying or damage to the lead or the plug.
9. Unplug the projector form the wall socket before cleaning. Use a damp cloth
for cleaning. Do not use liquid or aerosol cleaners.
10. Do not block the slots and openings in the projector case. They provide
ventilation and prevent the Digital Visualizer from overheating. Do not place
the Digital Visualizer on a sofa, rug or other soft surface or in a built-in
installation unless proper ventilation is provided.
11. Never push objects of any kind through cabinet slots. Never allow liquid of
any kind to spill into the Digital Visualizer.
12. Except as specifically instructed in this User’s Manual, do not attempt to
operate this product by yourself. Opening or removing covers may expose
you to dangerous voltages and other hazards. Refer all servicing to licensed
service personnel.
13. Unplug the Digital Visualizer during thunderstorms or if it is not going to be
used for an extended period, do not place the Digital Visualizer or remote
control on top of beat-emitting equipment or heated objects such as a car and
etc.
14. In the following situations, unplug the Digital Visualizer from the wall outlet
and refer servicing to licensed service personnel:
English - 4
„ If the power cable or plug becomes damaged or frayed.
„ If liquid is spilled into it or the Digital Visualizer has been exposed to rain
or water.
Safety Precautions
Warning: To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture.
This Digital Visualizer has a 3 wires AC line Plug. This is a safety feature to ensure
that the plug will fit into the power outlet. Do not try to defeat this safety feature.
If the Digital Visualizer will not be used for an extended time, unplug it from the
power outlet.
CAUTION
RISK OF ELECTRIC SHOCK
Caution: To reduce the risk of electric shock. Do not remove cover (or back). No
user-serviceable parts inside. Refer servicing to licensed service Personnel.
This symbol indicates that
dangerous voltage
constituting a risk of
electric shock is present
within this unit.
This symbol indicates that
there are important operating
and maintenance
instructions in this User’s
Manual with this unit.
FCC Warning
This Digital Visualizer has been certified to comply with the limits for a Class A
computing device, pursuant to Subpart J of Part 15 of FCC Rules. These limits are
designed to provide reasonable protection against a harmful interference when the
equipment is operated in a commercial environment.
EN55022 (CE Radiation) Warning
This product is intended for use in a commercial, industrial, or educational
environment. It is not intended for residential use.
This is a Class A product. In a domestic environment it may cause radio interference,
English - 5
in which case the user may be required to take adequate measures. The typical use
is in a conference room, meeting room or auditorium.
If this device certainly causes interference to radio or television, users can
modify the interference with the following methods:
♦
♦
♦
Readjust the direction of the antenna of the radio or the television.
♦
Use the screw driver to fasten the power plug to ensure EMI
control develops normal function.
Readjust the position between this device and the receiver.
Connect the power plug of this device and the device in different
sockets.
English - 6
Chapter 2 Package Content
Please make sure the package comes with the following items when you unpack:
PS400
Quick start guide
User Manual
Download Card
Power Cable
USB Cable
VGA Cable
Remote Control
C-Video Cable
English - 7
Chapter 3 Product Overview
3.1 Front View/ Rear View
11
1.
Camera Head
2.
Camera Arm
3.
Lamp
4.
Backlight
5.
Remote Control Slot
6.
CF card slot
7.
Lamp lock
8.
Control Panel
9.
Button Function Guide
10. IR Sensor (used for Remote
Control)
11. Input/Output Port (including
DIP Setting)
English - 8
3.2 I/O Connector
1. VGA IN
Connect to VGA-out of other device, for example PC
2. VGA OUT
Connect to VGA-in of another visual device
3. DVI OUT
Digital & Analog Receptacle Connector
4. S-VIDEO
S-Video for video output
5. C-VIDEO
C-Video for video output
6. USB
Connecting to a computer
7. RS232
Connect external device with RS232, e.g., central system used in
classroom or meeting
8. Setting
Setting output modes
9. DC 12V output
Output the 12V (DC) from Digital Visualizer, such as the backlight.
10. AC-in
Use this to connect the power cable (100 - 240V) for the power input
English - 9
3.3 DIP Switch Setting
3.3.1 RGB & XGA Output (Default )
Ï
OFF
(Default)
ON
Ð
3.3.2 Video Output (NTSC)
NTSC Setting：USA、Taiwan、 Panama、Philippine、Canadian、
Chile、Japan、Korea、Mexico
OFF
ON
3.3.3 Video Output (PAL )
PAL Setting: Besides above NTSC listed countries.
OFF
ON
3.3.4 SVGA Output
OFF
ON
English - 10
3.4 Control Panel
1.
Power
Power on/off
2.
Source
Select PC or Camera to output
3.
Image
Change between Photo or Text mode
4.
5.
Mode
Select Normal／Film／Slide／Microscope
Capture
Capture image to internal memory
6.
Play, Delete
Recall/delete the saved images in the
Digital Visualizer
7.
FLIP
Rotate the image by 180°
8.
Freeze
Freeze the image on screen
9.
A4/F1,A5/F2
Speedy zoom to A4/ A5 size by pressing A4 or A5
F1/F2 allows to customize functions
10. Zoom + /–
Zoom in/out by pressing continuously
11. AF
Auto focus by pressing once
12. Brightness +/–
Brightness Adjustment by
pressing BRT(+ /–)
13. Menu
Access into the OSD menu.
Press direction buttons to
select one menu and click
Enter to get into that menu
item
14. Enter
Used for job confirmation under OSD interface
English - 11
3.5 Remote Control
1.
2.
3.
Power
Power on/off
Source
Select PC or Camera to
Output
Menu
Access into the OSD menu.
Press direction buttons to select
one menu and click Enter to get
into that menu item
4.
5.
Lamp
Switch / on / off the lamp and
backlight
Zoom + /–
Zoom in/out by pressing +/–
6.
7.
Focus +/Manual focus for fine tune
Enter
Enable the selected function
8.
Freeze
Freeze the image on screen
9.
AF
Auto Focus
10. Capture
Capture image to internal
memory
11. Play
Recall the saved images in
the Digital Visualizer
12. Delete
Delete the saved images in
the Digital Visualizer
※ Caution：Using wrong
model of battery might cause
explosion. Please follow the
related instruction to discard
the used battery.
English - 12
Chapter 4 Installation
4.1 Setup the Digital Visualizer
1.
2.
3.
Pull up the arm. The camera head should aim at the center of the
Visualizer.
Press and hold the Lamp release on both side of the Visualizer
and push the Lamp release outside to pull up the lamp.
Turning the camera head toward the platform according to the
direction of the arrows below.
n
p
o
※Note：The angle of the camera head is limited. Don’t turn it
forcefully when it reaches the maximal angle.
4.2 Powering on the Digital Visualizer
※ Note：Before using the Digital Visualizer, make sure that you
have connected it to the computer, video source or other output
devices. See Figure: 3-2, Rear View for the position of connector
jack.
1.
2.
3.
Press <POWER> and open Digital Visualizer. The red LED
(blinks till finishing the initilization) will become green LED.
Press <LAMP> on remote control to open light sources on both
sides or backlight source.
You can turn the lamp frame with suitable angle outside to get
better effect of illumination.
English - 13
Chapter 5 Operation
5.1 Basic Functions
5.1.1 Source
The default input source is set as "Digital Visualizer", press 『Source』to switch.
Control Panel
Remote Control
Monitor
PC
Notebook
Projector
5.1.2 Zoom In/Out
Zoom in/out by pressing continuously
Control Panel
Remote Control
English - 14
5.1.3 Auto Focus
Execute AF by pressing once.
Control Panel
Remote Control
5.1.4 Brightness
5.1.5 Lamp
Switch / on / off the lamp and backlight
English - 15
5.1.6 Photo/Text/Gray
5.1.7 Capture
Control Panel
5.1.8 Accessing into OSD Menu
Control Panel
Remote Control
Remote Control
English - 16
5.2 Advanced Functions
5.2.1 Play Back Captured Images
Remote Control or Control Panel：
1.
Press『Play』to display all the captured images miniature.
2.
Press『d Sef』to select the miniature that you want.
3.
Press『Enter』to display the image in full screen.
4.
Press『ef』to view the up and down image.
5.
Press『Play』to return to main screen.
6.
Press『Menu』to exit.
5.2.2 Delete Captured Images
Remote Control or Control Panel：
1.
Press『Play』to access into browsing screen.
2.
Press『d Sef』to select the miniature that you want.
3.
Press『Delete』to delete the selected miniature.
4.
Press『Menu』to exit.
5.2.3 Customized Function ( F1/F2)
Control Panel：
1.
Press『Image』and『F1/F2』to enter setting menu.
2.
Press『d S 』to select『Flip』
、
『Focus + 』
、
『Focus - 』
、
『Preset』.
3.
Press『Menu』to exit.
4.
Execute the customized function set before, and press『Enter』
and『F1/F2』at the same time.
5.2.4 Auto Erase
Delete all captured images when user turns off the power.
Remote Control or Control Panel：
1.
Press『Menu』to enter OSD menu.
2.
Press『ef』to select『Storage』.
3.
Press『d S』to select『Auto Erase』.
English - 17
4.
Press『ef』to select『on/off)』
5.
Press『Menu』to exit.
5.3 OSD Function Introduction
5.3.1 Using OSD Menu
Remote Control or Control Panel：
1. Press『Menu』to enter OSD menu.
2. Press『 d S 』to select function menu.
3. Press『Enter』to enter menu.
4. Press『 d S 』to choose function.
5. 『fe』means more than one menu. Use『fe』to execute specified
function.
6. 『』means one menu only. Press『Enter』to execute the specified
function.
7. Press『Menu』to exit OSD menu.
※Note: After opening the function menu, the system will close the
menu automatically while unused for a period of time.
English - 18
5.3.2 OSD Menu
Layer 1
Display
Layer 2
Layer 3
Lamp
ON (default)/OFF
AE
ON (default)/OFF
Expose image
automatically
AWB
Execute
Auto white balance.
Focus
Storage
Description
Adjust image focus
Digital Zoom
ON/OFF (default)
Delete All
Execute
Delete all captured
images
Format
Execute
Format
Auto Erase
On / Off
Delete all captured
images when user
turns off the power.
Media
Internal / PC card
Language
English / Deutsch /
Francais / Italiano/
Eapanol / Русский /
English / Traditional
Chinese /Simplified
Chinese
Factory Reset
Enter / Exit
Preset Load
Execute
load setting
parameters
Preset Save
Execute
Save setting
parameters
F1
Flip,Prsest,Focus+/-
F2
Flip,Prsest,Focus+/-
Setting
Select your native
language
Reset all default
setting
English - 19
5.4 Other Functions
5.4.1 Viewing Remote Objects
Remote Control / Control Pad:
1. Press『Zoom+』or 『Zoom-』to view the scene that you want.
2. If the remote image is inverted, please press『Menu』to open OSD
menu and choose『Flip』.
5.4.2 Viewing Positive/Negative Images
1. The objects must be placed on the backlight board.
2. Press『Mode』to access into switching options, Positive/Negative.
5.4.3 Using USB and RS232
¾
USB
You can transmit images to computer via USB interface. To
enhance USB transmission, make sure that your PC supports USB
protocol (the Digital Visualizer is based on USB 1.1 and USB
software. For detailed information, please refer to software user’s
guide).
¾
RS232
RS232, a kind of serial protocol, facilitates remote control functions.
For example, you can control the Digital Visualizer installed in a
conference room from a PC in another building via RS232. (Refer to
3.2 I/O Connectors) Please ask RS232 comment list from the FAE
service member.
English - 20
5.5 Storage after Use
1.
Fold the arm and camera head until they touch the stage
2.
Turn the camera until it is parallel with the stage.
3.
Turn the upper lamps toward the supporting arms
4.
Insert the remote control into the slot on the right of the Digital Visualizer.
5.
Fold them to both sides of the Digital Visualizer until they lock in both
sides.
English - 21
Chapter 6 Q & A
This chapter describes the problems you might have encountered when you use
this Digital Visualizer. If you have a problem, refer to the appropriate section and
follow all the suggestions that apply to your problem. If none of the suggested
solutions solves the problem, call your dealer or your service center.
z
Q1: The system indicator does not come on.
Ans1:
No power is coming on. Check that the power cord is connected securely
both at the power outlet and the PS.
z
Q2: No image appears on the screen.
Ans2:
1-Press different signal buttons and then press the selected signal
button.
2- Make sure all of the cables are installed correctly and securely.
3- Check the power of LCD monitor or projector is turned on.
4- Make sure the objector is positioned in the shooting area.
z
Q3: The image or parts of the image are blurred or not in focus.
Ans3:
The lens focusing is maybe not correct or the image sampling is not in
the best condition. Press the AF (Auto Focus) on the remote control.
z
Q4: Image is too dark or too bright.
Ans4:
Press the <BRT+>、<BRT-> on the control panel to adjust the brightness
setting.
z
Q5: Remote Control does not work.
Ans5:
1- Please make sure the remote control aimed at
the IR sensor.
2- Please check the battery.
IR Sensor
English - 22
">