Win Wind Corp.
USER’S GUIDE FOR BATH THERMOMETER
(WT-28,WT-29, WT-30)
Please read the instructions carefully to ensure accurate temperatures and safe operation.
IMPORTANT SAFETY INFORMATION:
•
Do not allow children to take bath temperature unattended.
•
Never leave children alone and unsupervised in the bath.
•
The bath thermometer is only a simple water temperature indicator. Always check the
temperature of the bath water with the back of your hand before putting child into bath.
•
Do not use thermometer if broken or damaged.
•
Do not place it into water beyond 70º C.
•
Do not recharge battery. Properly dispose of the battery, keeping it from small children and
heat.
•
Always replace with new battery.
FEATURES:
•
Measurement range: 0º C to 70º C
•
When LCD flashes, the cell batteries are exhausted.
•
When water temperature is higher than 70º C, the LCD displays “Hi” and it displays “Lo” when
water temperature is lower than 0º C.
OPERATION:
•
Press the On/Off button; the LCD displays the room temperature.
•
When water temperature ranges from 38º C to 42º C, LED lights persistently, which means the
temperature is suitable for bath.
•
Press and hold the On/Off button for two seconds to enter turnoff status.
•
Put the Bath Thermometer on the water, LCD displays the accurate water temperature within 90
seconds.
HOW TO CARE FOR THIS PRODUCT:
•
Clean the thermometer by using isopropyl alcohol or soap and water before and after use.
•
Store Bath Thermometer in a cool, dry place and away from direct sunlight while not in use.
•
Do not open the bath thermometer except to replace the battery.
•
Do not drop the thermometer, as this may ruin the unit.
•
Turn off the bath thermometer soon after use to save battery and prolong the battery life.
CHANGING THE BATTERY:
•
Make sure a battery of the same type is on hand.
•
Remove battery compartment lid with screwdriver.
•
Replace the batteries.
•
Properly dispose of the old batteries.
1
">
