HT-D350

HT-D355

Digital Home

Entertainment System user manual

Imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at www.samsung.com/register

Safety Information

Safety Warnings

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury.

CAUTION : TO PREVENT ELECTRIC

SHOCK, MATCH WIDE BLADE OF PLUG TO

WIDE SLOT, FULLY INSERT.

This symbol indicates important instructions accompanying the product.

WARNING

•

To reduce the risk of fi re or electric shock, do not expose this appliance to rain or moisture.

CLASS 1

KLASSE 1

LASER PRODUCT

LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

CAUTION

•

Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be placed on the apparatus.

•

•

•

The Mains plug is used as a disconnect device and shall stay readily operable at any time.

This apparatus shall always be connected to an AC outlet with a protective grounding connection.

To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

CLASS 1 LASER PRODUCT

This Compact Disc player is classifi ed as a CLASS

1 LASER product.

Use of controls, adjustments or performance of procedures other than those specifi ed herein may result in hazardous radiation exposure.

CAUTION

•

INVISIBLE LASER RADIATION WHEN OPEN AND

INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.

2

English

Precautions

•

•

•

•

•

•

•

•

•

•

•

•

Ensure that the AC power supply in your house complies with the identifi cation sticker located on the back of your product.

Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (7.5~10cm).

Do not place the product on amplifi ers or other equipment which may become hot.

Make sure the ventilation slots are not covered.

Do not stack anything on top of the product.

Before moving the product, ensure the Disc Insert Hole is empty.

In order to disconnect the product completely from the power supply, remove the AC plug from the wall outlet, especially when left unused for a long period of time.

During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could damage the product.

•

Do not expose the product to direct sunlight or other heat sources. This could lead to overheating and malfunction of the product.

Protect the product from moisture, and excess heat or equipment creating strong magnetic or electric fi elds (i.e. speakers.).

Disconnect the power cable from the AC supply if the product malfunctions.

Your product is not intended for industrial use. Use of this product is for personal use only.

Condensation may occur if your product or disc has been stored in cold temperatures. If transporting the product during the winter, wait approximately 2 hours until the product has reached room temperature before using.

The batteries used with this product contain chemicals that are harmful to the environment.

Do not dispose of batteries in the general household trash.

Accessories

Check for the supplied accessories below.

POWER

TITLE

DISC

MENU MO/ST

FUNCTION

TV SOURCE

TUNER

MEMORY

P L

㪈

REPEAT

㪋

INFO

㪎

USB REC

TV CH V MUTE

DSP / EQ

㪉

㪌

GIGA

㪏

VOL

㪇

S/W LEVEL

㪊

DIMMER

㪍

㪐

TO

OL

DVD RECEIVER

TUNING V

SELECT

SAMSUNG

TV

Video Cable FM Antenna User manual Remote Control/Batteries (AAA size)

English

3

Safety Information

Cautions on Handling and Storing Discs

Small scratches on the disc may reduce sound and picture quality or cause skipping.

Be especially careful not to scratch discs when handling them.

Licence

•

Dolby, Pro Logic, and the double-D symbol are registered trademarks of Dolby Laboratories.

Holding discs

•

•

Do not touch the playback side of the disc.

Hold the disc by the edges so that fi ngerprints will not get on the surface.

•

Do not stick paper or tape on the disc.

Disc Storage

•

•

•

Do not keep in direct sunlight

Keep in a cool ventilated area

Keep in a clean Protection jacket.

Store vertically.

✎





NOTE

Do not allow the discs to become contaminated with dirt.

Do not load cracked or scratched discs.

•

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This is an offi cial DivX Certifi ed® device that plays DivX video. Visit www.divx.com for more information and software tools to convert your fi les into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certifi ed® device must be registered in order to play purchased

DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

DivX Certifi ed® to play DivX® video, including premium content

DivX®, DivX Certifi ed® and associated logos are trademarks of DivX, Inc. and are used under licence.

Covered by one or more of the following U.S. patents :

7,295,673; 7,460,668; 7,515,710; 7,519,274

Handling and Storing Discs

If you get fingerprints or dirt on the disc, clean it with a mild detergent diluted in water and wipe with a soft cloth.

•

When cleaning, wipe gently from the inside to the outside of the disc

✎



NOTE

Condensation may form if warm air comes into contact with cold parts inside the product. When condensation forms inside the product, it may not operate correctly. If this occurs, remove the disc and let the product stand for 1 or 2 hours with the power on.

•

•

HDMI, the HDMI Logo, and High-Defi nition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing LLC in the United States and other countries.

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Copyright

© 2011 Samsung Electronics Co., Ltd. All rights reserved.

Copy Protection

•

Many DVD discs are encoded with copy protection.

Because of this, you should only connect your product directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs.

4

English

Contents

SAFETY INFORMATION

3 Precautions

3 Accessories

4 Cautions on Handling and Storing Discs

4 Licence

4 Copyright

GETTING STARTED

6 Icons that will be used in manual

6 Disc Types and Characteristics

9 Description

BASIC FUNCTIONS

23 Audio CD(CD-DA)/MP3/WMA Playback

23 JPEG File Playback

24 Using the Playback Function

28 Listening to Radio

ADVANCED FUNCTIONS

CONNECTIONS

11 Connecting the Speakers

16 Connecting the FM Antenna

17 Connecting Audio from External Components

SETUP

18 Before Starting (Initial Settings)

18 Setting the Setup menu

19 Display

19 Resolution

19 Video Out Signal

19 Audio

21 DRC (Dynamic Range Compression)

21 System

21 Language

22 Security

22 Support

OTHER INFORMATION

30 Troubleshooting

31 Language code list

• Figures and illustrations in this User Manual are provided for reference only and may differ from actual

• product appearance.

An administration fee may be charged if either a.

an engineer is called out at your request and there is no defect in the product

(i.e. where you have failed to read this user manual) b.

you bring the unit to a repair centre and there is no defect in the product

(i.e. where you have failed to read this user manual).

• The amount of such administration charge will be advised to you before any work or home visit is carried out.

English

5

Getting Started

Icons that will be used in manual

Make sure to check the following terms before reading the user manual.

Icon d

B

A

Term

DVD

CD

MP3

Defi nition

This involves a function available with DVD-Video or

DVD±R/±RW discs that have been recorded and fi nalised in Video Mode.

This involves a function available with a data CD

(CD DA, CD-R/-RW).

This involves a function available with CD-R/-RW discs.

G

D

!

✎

JPEG

DivX

CAUTION

NOTE

Shortcut

Key

This involves a function available with CD-R/-RW discs.

This involves a function available with MPEG4 discs.

(DVD±R/±RW, CD-R/-RW)

This involves a case where a function does not operate or settings may be cancelled.

This involves tips or instructions on the page that help each function operate.

This function provides direct and easy access pressing the button on the remote control.

Region Code

The product and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play.

A DVD Video labeled

ALL

will also play on this system.

Disc Types and Characteristics

Disc types that can be played

Disc Types &

Mark (Logo)

Recorded

Signals

DVD-VIDEO

Characteristics

VIDEO

DVD video

DVD-R/DVD-RW IN DVD video

FORMAT

DVD+R/DVD+RW IN DVD video FORMAT

AUDIO AUDIO CD

AUDIO-CD

DivX

AUDIO

+

VIDEO

DATA CD

DATA DVD

USB Device

AUDIO CD

CD-R/CD-RW in AUDIO CD

FORMAT

CD-R/CD-RW in DATA CD

FORMAT that contains the following kinds of fi les and conforms to ISO 9660 LEVEL

1/LEVEL 2, OR JOLIET

(EXTENDED FORMAT)

-MP3 fi les

-JPEG Image fi les

-MPEG 4 VIDEO fi les

DVD-ROM/DVD-R/DVD-RW

DVD+R/DVD+RW IN DATA

DV FORMAT that contains the following kinds of fi les and conforms to

UDF(*Universal Disk Format)

-MP3 fi les

-JPEG Image fi les

-MPEG 4 VIDEO fi les

USB Device that contains the following kinds of fi les.

-MP3 FILE OR WMA/WMV fi les

-JPEG Image fi les

-MPEG 4 Video fi les

6

English

Do not use the following type of discs!

•

LD, CD-G, CD-I, CD-ROM, DVD-ROM and

DVD-RAM discs cannot be played on this product.

If such discs are played, a <WRONG DISC

FORMAT> message appears on the TV screen.

•

DVD discs purchased abroad may not play on this product.

If such discs are played, a <Wrong Region. Please check Disc.> message appears on the TV screen.

Disc Types And Disc Format

This product does not support Secure (DRM) Media fi les.

CD-R Discs

•

Some CD-R discs may not be playable depending on the disc recording device (CD-Recorder or PC) and the condition of the disc.

•

Use a 650MB/74 minute CD-R disc.

Do not use CD-R discs over 700MB/80 minutes as they may not be played back.

•

•

Some CD-RW (Rewritable) media, may not be playable.

Only CD-Rs that are properly "closed" can be fully played. If the session is closed but the disc is left open, you may not be able to fully play the disc.

CD-R MP3 Discs

•

MP3 fi le names should contain no blank spaces or special characters (. / = +).

•

Use discs recorded with a compression/ decompression data rate greater than 128Kbps.

•

If the disc is not closed, it will take longer to begin playback and not all of the recorded fi les may be played.

•

For fi les encoded in Variable Bit Rate (VBR) format, i.e. fi les encoded in both low bit rate and high bit rate (e.g., 32Kbps ~ 320Kbps), the sound may skip during playback.

•

A maximum of 500 tracks can be played per CD.

•

A maximum of 300 folders can be played per CD.

CD-R JPEG Discs

•

A maximum of 999 images can be stored on a folder.

•

When playing a Kodak/Fuji Picture CD, only the JPEG fi les in the picture folder can be played.

•

Picture discs other than Kodak/Fuji Picture CDs may take longer to start playing or may not play at all.

DVD±R/±RW, CD-R/RW Discs

•

Software updates for incompatible formats are not supported.

(Example : QPEL, GMC, resolutions higher than

800 x 600 pixels, etc.)

•

If a DVD-R/-RW disc has not been recorded properly in DVD Video format, it will not be playable.

DivX (Digital internet video express)

DivX® is a video fi le format developed by DivX, Inc and is based on MPEG4 compression technology to provide audio and video data over the Internet in real-time.

MPEG4 is used for video encoding and MP3 for audio encoding, enabling to watch a movie at near DVD-quality video and audio.

Supported Formats (DivX)

This product only supports the following media formats.If both video and audio formats are not supported, the user may experience problems such as broken images or no sound.

Supported Video Formats

Format Supported Versions

AVI

DivX3.11~DivX5.1

WMV

V1/V2/V3/V7

Supported Audio Formats

Format

MP3

WMA

AC3

Bit Rate

80~320kbps

56~128kbps

128~384kbps

Sampling

Frequency

44.1khz

44.1/48khz

•

•

•

Aspect Ratio : Although the default DivX resolution is

640x480 pixels, this product supports up to

720x480 pixels. TV screen resolutions higher than

800 will not be supported.

When you play a disc whose sampling frequency is higher than 48khz or 320kbps, you may experience shaking on the screen during playback.

Sections with a high frame rate might not be played while playing a DivX fi le.

•

Since this product only provides encoding formats authorized by DivX Networks, Inc., a DivX fi le created by the user might not play.

English

7

Getting Started

Notes on USB connection

Supported devices: USB storage media, MP3 player, digital camera

1) If a folder or fi le name is longer than 10 characters, it may not properly display or operate.

2) A subtitle fi le bigger than 300KB may not be properly displayed.

3) A certain USB/digital camera device, USB card reader is not supported.

4) FAT16 and FAT32 fi le systems are supported.

5) Photo (JPEG), music (MP3, WMA) and video fi le should have their names in Korean or English.

Otherwise, the fi le may not played.

6) Connect directly to the product's USB port.

Connecting through another cable may raise problems with USB compatibility.

7) Inserting more than one memory device to a multi-card reader may not operate properly.

8) PTP protocol for digital camera is not supported.

9) Do not disconnect USB device during a

"Reading" process.

10) Bigger the image resolution, the longer the delay to displaying.

11) DRM applied MP3/WMA or video fi les downloaded from a commercial site are not played back.

12) External HDD device is not supported.

13) The maximum current supported by the USB port for an external device is 500 mA (at 5V DC).

14) Supported fi le formats

Format

File name

Still

Picture

JPG MP3

Music

WMA

File extension

JPG

.JPEG

.MP3

.WMA

WMV

.WMV

Movie

DivX

.AVI

Bit rate –

80~320 kbps

56~128 kbps

4Mbps 4Mbps

Version – – V8

Pixel

Sampling

Frequency

640x480

–

– –

44.1kHz

44.1kHz

V1,V2,

V3,V7

DivX3.11~

DivX5.1

720x480

44.1KHz~ 48KHz

8

English

Front Panel

1 2

Description

3 4 5 6 7 8 9 10

5V 500mA

1

DISC TRAY

2

DISPLAY

3

USB PORT

4

OPEN/CLOSE BUTTON ( )

5

FUNCTION BUTTON ( )

6

STOP BUTTON ( )

7

PLAY/PAUSE BUTTON ( )

8

VOLUME CONTROL BUTTON

9

POWER BUTTON ( )

10

REMOTE CONTROL SENSOR

Rear Panel

1

SPEAKER OUTPUT

CONNECTORS

4

HDMI OUT JACK

7

VIDEO OUT JACK

1 2 3 4 5 6

FRONT

SPEAKERS OUT

CENTER FRONT

SURROUND SUBWOOFER SURROUND

SPEAKER IMPEDANCE : 3

ONLY

FOR SERVICE

DIGITAL

AUDIO IN

HDMI OUT

COMPONENT OUT

AUX IN VIDEO OUT

FM ANT

8 7

2

ONLY FOR SERVICE

5

COMPONENT VIDEO OUTPUT

JACKS

8

AUX IN JACKS

3

EXTERNAL DIGITAL OPTICAL IN

JACK (DIGITAL AUDIO IN)

6

FM ANTENNA JACK

English

9

Getting Started

Remote control

Tour of the Remote Control

Turn the product on and off.

Allow access to common functions of the product such as the Photo

List.

A. TITLE button : Press to check the title menu.

B. DISC MENU button : Press to check the disc menu.

Press numeric button to operate options.

or

5. USB REC button : Used to start USB recording.

6. DIMMER button : Adjust the brightness of Display.

7. INFO button :Display current disc(file) status.

8.GIGA button : Used to turn on/off

GIGA Sound function.

Press to skip backwards.

/Change channels down.

Press to search backwards or forwards.

Press to stop/play a disc.

POWER

FUNCTION

TV SOURCE

TITLE

A

DISC

MENU

B

MO/ST

C

TUNER

MEMORY

D

P L DSP / EQ S/W LEVEL

㪈 㪉 㪊

REPEAT USB REC DIMMER

㪋 㪌 㪍

INFO GIGA

㪎 㪏

VOL

㪇

㪐

TV CH V

MUTE

Press this to move to the home menu.

Select on-screen menu items and change menu value.

Used to change the audio/subtitle language, angle etc.

Press to select the DVD RECEIVER mode.

TOOLS

DVD RECEIVER

TUNING V

SELECT

SAMSUNG

TV

To open and close the disc tray.

Press to select TV's video mode.

or

This is mode selection button.

C. MO/ST button : Press to listen in Mono/Stereo in the FM mode.

D. TUNER MEMORY button :

Press to preset FM stations.

Press numeric button to operate options.

or

1. PLII button : Select the desired Dolby

Pro Logic II audio mode, P.Bass or MP3 enhancement function.

2. DSP/EQ button : Select the desired

DSP/EQ audio mode.

3. SW/ LEVEL button : Used to adjust the level of the subwoofer.

4. REPEAT button : Allows you to repeat a title, chapter, track or disc.

Adjust the volume up/down.

Cut off the sound temporarily.

Press to skip forwards /Change channels up.

Press to pause a disc.

Return to the previous menu.

Exit the menu.

Press to select TV.

Installing batteries in the Remote Control

* Battery size: AAA

✎



NOTE

Place batteries in the remote control so they match the polarity : (+) to (+) and (–) to (–).







Always replace both batteries at the same time.

Do not expose the batteries to heat or fl ame.

The remote control can be used up to approximately 7 meters in a straight line.



The remote control will work on a Samsung TV.

10

English

Connections

This section involves various methods of connecting the product to other external components.

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

SW

Position of the product

Place it on a stand or cabinet shelf, or under the

TV stand.

Selecting the Listening Position

The listening position should be located about 2.5 to 3 times the distance of the TV's screen size away from the TV.

Example : For 32" TV's 2~2.4m

For 55" TV's 3.5~4m

Front Speakers ei

Place these speakers in front of your listening position, facing inwards (about 45°) toward you. Place the speakers so that their tweeters will be at the same height as your ear. Align the front face of the front speakers with the front face of the center speaker or place them slightly in front of the center speakers.

Center Speaker f

It is best to install it at the same height as the front speakers. You can also install it directly over or under the TV.

Surround Speakers hj

Place these speakers to the side of your listening position.

If there isn't enough room, place these speakers so they face each other. Place them about 60 to

90cm above your ear, facing slightly downward.

*

Unlike the front and center speakers, the surround speakers are used to handle mainly sound effects and sound will not come from them all the time.

Subwoofer g

The position of the subwoofer is not so critical. Place it anywhere you like.





!



CAUTION

Do not let children play with or near the speakers. They could get hurt if the speaker falls.

When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.

Keep the subwoofer out of the reach of children so as to prevent them from inserting their hands or alien substances into the duct (hole) of the subwoofer.



Do not hang the subwoofer on the wall through the duct (hole).

✎



NOTE

If you place a speaker near your TV set, screen colour may be distorted because of the magnetic fi eld generated by the speaker. If this occurs, place the speaker away from your TV set.

English

11

Connections

Speaker Components

HT-D350

(L) (R) (L) (R)

FRONT SURROUND CENTER

SUBWOOFER SPEAKER CABLE

Speaker Components

HT-D355

SPEAKER CABLE

(L) (R)

SCREW (5×15): 4EA

SCREW (4×20): 16EA



Assembled Speakers

HT-D355

CENTER SPEAKER

FRONT

(L) (R)

STAND

CENTER

SURROUND

STAND BASE SUBWOOFER

Installing the Speakers on the Tallboy Stand

* HT-D355 only - Front/Surround Speakers

1.

2.

Turn the Stand Base upside-down and connect it to the Stand.

Insert small screws (4*20, For connecting Stand & Stand

Base) clockwise into the four holes marked using a

!

screwdriver as shown in the illustration.

CAUTION :

When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below

15 kg.f.cm)

1

12

English

FRONT/SURROUND

SPEAKER

Stand

Base

Stand

2

SUBWOOFER

3.

Connect the upper Speaker to the assembled Stand.

3

4.

Insert another large screw (5*15, For connecting Speaker

& Stand) clockwise into the hole on the rear of the speaker using a screwdriver.

5.

This is the appearance after the speaker is installed.

Follow this steps to install other speaker.

5

Speaker

4

Stand

Connecting The Speakers

1.

2.

3.

Press down the terminal tab on the back of the speaker.

Insert the black wire into the black terminal (–) and the red wire into the red terminal (+), and then release the tab.

Connect the connecting plugs to the back of the product by matching the colours of the speaker plugs to the speaker jacks.

Black

Red

Connecting the wall mount

1.

Connect the speaker cord with the colour tube to (+), and the speaker cord without the colour tube to (–).

2.

Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.

See the illustrations below.

30 mm

Colour tube

Front left speaker (L) : White

Front right speaker (R) : Red

Center speaker : Green

Surround left speaker (L) : Blue

Surround right speaker (R) : Gray

5 mm

4 mm

10 mm

Hold on the back of the speaker

3.

Fasten the screws to the wall, then hang the speaker on the wall.

8 to 10 mm

Depth of fastened screw

English

13

Connections

Connecting the Video Out to your TV

Choose one of the three methods for connecting to a TV.

METHOD 2

HDMI OUT

Red Blue Green

COMPONENT OUT

VIDEO OUT

METHOD 3 (supplied)

METHOD 1

METHOD 1 : HDMI

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV.

METHOD 2 : Component Video

If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from the COMPONENT OUT (P

R

, P

B

and Y) jacks on the back of the product to the Component Video Input jacks on your TV.

METHOD 3 : Composite Video

Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack on your TV.

✎



NOTE

Resolutions available for the HDMI output are 480p(576p), 720p,1080i/1080p. See page 19 for the resolution setting.





This product operates in Interlace scan mode 480i(576i) for component/composite output.

After making the video connection, set the Video input source on your TV to match the corresponding Video output mode on your product.

Turn this product on fi rst before you set the video input source on your TV. See your TV owner's manual for more information on how to select the TV's Video Input source.

!



CAUTION

Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the television.

14

English

HDMI FUNCTION

HDMI Auto Detection Function

The product's video output will automatically change to HDMI mode when connecting an HDMI cable while power is on.

•

•

HDMI (High Defi nition Multimedia Interface)

HDMI is an interface that enables the digital transmission of video and audio data with just a single connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack.

•

HDMI connection description

- HDMI outputs only a pure digital signal to the TV.

•

•

- If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on the screen.

What is the HDCP?

HDCP (High-band width Digital Content Protection) is a system for protecting DVD content outputted via

HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being made.

Using Anynet+(HDMI-CEC)

Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable. This is only available with SAMSUNG TV's that support Anynet+.

1.

2.

Connect the product to a Samsung TV with an HDMI cable. (See page 14)

Set the Anynet+ function on your TV. (See the TV instruction manual for more information.)

✎







NOTE

The Anynet+ function supports some buttons of the remote control.

This function is not available if an HDMI cable does not support CEC.

Depending on your TV, certain HDMI output resolutions may not work.

Please refer to the user’s manual of your TV.



Please check the

logo (If your TV has an logo, then it supports Anynet+ function.)

English

15

Connections

Connecting the FM Antenna

FM Antenna (supplied)

FM ANT

TAL

O IN

1.

Connect the FM antenna supplied to the FM Antenna jack.

2.

Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it to a wall or other rigid surface.

✎



NOTE

This product does not receive AM broadcasts.

16

English

Connecting Audio from External Components

FRONT CENTER FRONT

SURROUND SUBWOOFER SURROUND

ONLY

FOR SERVICE

DIGITAL

AUDIO IN

Optical Cable

(not supplied)

Red

AUX IN

White

Audio Cable (not supplied)

If the external analogue component has only one Audio

Out, connect either left or right.

Set-Top Box

OPTICAL

AUX

VCR

AUX : Connecting an External Analogue Component

Analogue signal components such as a VCR.

1.

Connect AUX IN (Audio) on the back of the product to the Audio Out of the external Analogue component.

•

Be sure to match the colours of the connecting jacks.

2.

Press the FUNCTION button to select AUX input.

•

The mode switches as follows :

DVD/CD

➞

D.IN

➞

AUX

➞

USB

➞

FM

✎



NOTE

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the

VCR to this product.

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).

1.

Connect the DIGITAL AUDIO IN external digital component.

( OPTICAL ) on the back of the product to the Digital Output of the

2.

Press the FUNCTION button to select D.IN

.

•

The mode switches as follows :

DVD/CD

➞

D.IN

➞

AUX

➞

USB

➞

FM

English

17

Setup

Before Starting (Initial Settings)

1.

Press the POWER button when it is plugged in

TV for the fi rst time.

Initial Settings screen will be displayed.

Setting the Setup menu

The access step may differ depending on the selected menu. The GUI (Graphical User Interface) in this manual may differ, depending on the fi rmware version.

Initial settings I On-Screen Language

Select a language for the on-screen displays.

English

한국어

Nederlands

Français

Deutsch

Italiano

Move Select Return

1

2

TOOL

S

TUNING V

3

4

2.

3.

4.

Press the ▲▼ buttons to select the desired language, then press the ENTER button.

Press the ENTER button to select Start button.

Press the ▲▼ buttons to select desired TV Aspect, then press the ENTER button.

✎



NOTE

If you have not selected a preferred language in the initial settings, you will see a language

 selection window next time you turn on the product.

Your language selection will apply to all menus:

On-Screen Menu, Disc Menu, Audio, Subtitle.



If you want to move to the previous screen, press the RETURN button.



Once you select a menu language, you can change it by pressing the STOP (



) button on the remote control for more than 5 seconds with no disc inserted.



When the Initial Settings screen does not appear, refer to the Initial Settings. (see page 21)

1

MENU BUTTON : Display the home menu.

2

3

ENTER / DIRECTION BUTTON

Move the cursor and select an item.

Select the currently selected item.

Confi rm the setting.

RETURN BUTTON : Return to the previous setup menu.

4

EXIT BUTTON : Exit the setup menu.

Function DVD/CD

Settings

1.

2.

3.

4.

5.

6.

Press the POWER button.

Press the

◄►

buttons to select Settings , then press the ENTER button.

Press the buttons to select the desired menu, then press the ENTER button.

Press the buttons to select the desired submenu, then press the ENTER button.

Press the buttons to select the desired item, then press the ENTER button.

Press the EXIT button to exit the setup menu.

18

English

Display

You can confi gure various display options such as the TV Aspect, Resolution, etc.

TV Aspect

Depending on the type of television you have, you may want to adjust the screen setting.

•

4:3 Pan-Scan

Select when you want to see the 16:9 video supplied by the DVD without the black bars on top and bottom, even though you have a TV with a 4:3 ratio screen(extreme left and right portion of the movie picture will be cut off).

•

4:3 Letter Box

Select when you want to see the total

16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen.

•

16:9 Wide

You can view the full 16:9 picture on your widescreen TV.

✎







NOTE

This will optimize the picture quality according to the content (In the DVD disc, etc) that you want to play and the product or your BD Wisecompliant Samsung TV.

If you want to change the resolution in BD Wise mode, you must set BD mode to Off in advance.

BD Wise will be disabled if the product is connected to a device that does not support

BD Wise.

Resolution

Sets the output resolution of the HDMI video signal. The number in 576p, 720p, 1080i and 1080p indicates the number of lines of video.

•

•

•

•

•

The i and p indicate interlace and progressive scan, respectively.

480p(576p)

720p

1080i

: Outputs 720 lines of progressive video.

1080p

: Outputs 480 lines of progressive video.

: Outputs 1080 lines of interlaced video.

: Outputs 1080 lines of progressive video.

BD Wise : Automatically sets the optimal resolution when connected via HDMI to a TV with the BD Wise feature. (The

BD Wise menu item appears only if BD Wise is set to On.)

✎



NOTE

If Component or Composite is connected, the resolution supports only 480i(576i).



1080P may not appear depending on TV.

HDMI Format

•

•

You can optimize the colour setting from the HDMI output. Select a connected device Type.

Monitor :

TV :

Select if connected to a Monitor via HDMI.

Select if connected to a TV via HDMI.

Video Out Signal

✎









NOTE

When using HDMI, the screen is automatically converted to the

16:9 Wide mode and TV Aspect is deactivated.

If a DVD is in the 4:3 ratio, you cannot view it in the wide screen.

Since DVD discs are recorded in various image formats, they will look different depending on the software, the type of TV, and the

TV aspect ratio setting.

BD Wise

(Samsung products only)

BD Wise is Samsung's latest inter-connectivity feature. When you connect Samsung products with

BD-Wise to each other via HDMI, the optimum resolution will be set automatically.

•

On : The original resolution of the DVD disc will be output to the TV direct.

•

Off : The output resolution will be fi xed according to the Resolution previously set, regardless of the resolution of the disc.

Different countries apply different TV standard.

You can select from NTSC or PAL.

•

•

NTSC : You can select the NTSC video format

PAL : You can select the PAL video format

Audio

Speaker Setting

Speaker Size

You can set the Speaker Size of the Center and Surround

Speakers, as well as Test Tone in this mode.

English

19

Setup

Settings

Speaker Setting

Speaker Size

Sound Edit

Delay Time

Test Tone : Off

►

Move

Select Return

Select Return

•

•

•

For the Front, the mode is set to Small.

For the Subwoofer, the mode is set to Present.

For the Center and Surround, you can switch the mode to Small or None.

- Small : Select this when using the speakers.

- None : Select this when no speaker is connected.

✎



NOTE

The speaker mode may vary depending on the

Dolby Pro Logic and Stereo settings.

Sound Edit

You can adjust the balance and level for each speaker.

Settings

Front Bal.

Surround Bal.

Center Level

Surround Level

SW Level

Sound Edit dB L dB L

R

R dB dB dB dB dB

<

Change

"

Select

'

Return m Move " Select ' Return

Settings

Test Tone

Settings

Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the Center and Surround speakers.

You can also set the Test Tone in this mode.

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.

Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the Center and Surround Speakers.

Delay Time

Front

Center

Surround

Subwoofer

: 00ms

: 10ms

Test Tone : Off

< Change " Select ' Return m

Move

"

Select

'

Return

Speaker Setting

Speaker Size

Sound Edit

Delay Time

Test Tone : On

►

" Select ' Return m

Move

"

Select

'

Return

Press the

▲▼

buttons to select and adjust the desired speaker.

Press the

◄►

buttons to adjust the settings.

Adjusting Front/Surround Bal.





You can select between 0 and -6.

The volume decreases as you move closer to –6.

Adjusting Center/Surround/Subwoofer Level



The volume level can be adjusted in steps from

+6dB to –6dB.



The sound gets louder as you move closer to +6dB and quieter as you get closer to -6dB.

20

English

Use the Test Tone feature to check the speaker connections.

•

Press the

◄►

buttons to select On .

•

The test tone will be sent to Front Left

➞

Center

➞

Front Right

➞

Surround Right

➞

Surround

Left

➞

Subwoofer in order.

To stop the test tone, press the ENTER button.

DRC (Dynamic Range Compression)

This feature balances the range between the loudest and quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

•

You can select either Full, 6/8, 4/8, 2/8, off.

AUDIO SYNC

Video and audio sync may not match with digital TV.

If this occurs, adjust the audio delay time to match the video

•

You can set the audio delay time between 0ms and 300ms. Set it to the optimal status.

Initial Settings

System

By using the Initial Settings, you can set the language and

TV aspect.

✎



NOTE

If the HDMI cable is connected to the product,

TV aspect does not appear and it is set to 16:9

Wide automatically.

DivX(R) Registration

View DivX(R) VOD Registration Code to purchase and play DivX(R) VOD content.

HDMI AUDIO

The audio signals transmitted over the HDMI Cable can be toggled On/Off.

Language

You can select the language you prefer for onscreen menu, disc menu, etc.

•

Off : Video is transmitted over the HDMI connection cable only, and audio is output through the product speakers only.

•

On : Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.

✎





NOTE

The default setting of this function is HDMI Audio Off.

HDMI Audio is automatically down-mixed to 2ch for



TV speakers.

When HDMI Audio is set to On, PL II /DSP EQ



/P.BASS doesn't work.

With HDMI AUDIO set to 'On', the volume can be adjusted only using the TV remote control.

OSD

Language

Select the language for the onscreen displays.

Disc Menu

Select the language for the disc menu displays.

Audio Select the language for disc audio.

Subtitle Select the language for disc subtitles.

menu, select OTHERS in the Disc Menu, Audio and

Subtitle, and enter the language code of your country (see page 31).

a You cannot select OTHERS in the OSD Language menu.

✎



NOTE

The selected language will only appear if it is supported on the disc.

English

21

Setup Basic Functions

Security

The Parental Lock function works in conjunction with

DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches.

There are up to 8 rating levels on a disc.

Parental Rating

Select the rating level you want to set.

A larger number indicates that the program is intended for adult use only. For example, if you select up to Level

6, discs that contain Level 7, 8 will not play.

Enter the password and then press the ENTER button.

- The password is set to "0000" by default.

- Once the setup is complete, you will be taken to the previous screen.

Change Password

Select Change and enter the 4-digit password to set the parental lock using the number buttons on the remote control.

If you forgot your password

1.

2.

Remove the disc.

Press and hold the STOP (



) button on the remote control for 5 seconds or more. All settings will revert to the factory settings.

Disc Playback

1.

Press the OPEN/CLOSE (



) button.

2.

3.

Place a disc gently into the tray with the disc's label facing up.

Press the OPEN/CLOSE (



) button to close the disc tray.

✎



NOTE

Resume function: When you stop disc play, the product remembers where you stopped, so when you press PLAY button again, it will pick up where you left off. (This function works only with

DVDs.)

Press the STOP button twice during playback to disable the Resume function.



If no buttons are pressed on the product or remote control for more than 3 minutes when the product is in Pause mode, it will change to STOP mode.



The initial screen may appear different, depending on the content of the disc.



Pirated discs will not play in this product because they violate the CSS(Content Scrambling System: a copy protection system) recommendations.

a

will appear when an invalid button is pressed.

TV Screen Saver/Power Saving Function

Support

Product Information

Provide the product information such as Model code, Softrware Version, etc.

•

If no button input is made for more than 5 minutes in Stop or Play mode, the screen saver will get activated.

•

If the product is left in the screen saver mode for more than 25 minutes, the power will automatically turn off. (Except during play a music)

22

English

Audio CD(CD-DA)/MP3/WMA Playback

Track01

1/17

BA

0:15 / 3:59

Function DVD/CD Repeat Play Mode

JPEG File Playback

Images captured with a digital camera or camcorder, or

JPEG fi les on a PC can be stored on a CD and then played back with this product.

1.

2.

3.

4.

Insert a JPEG disc on the disc tray.

Press the

◄►

buttons to select Photo , and then press the ENTER button.

Press the

▲▼

buttons to select the folder you want to play, and then press the ENTER button.

Press the ▲▼ buttons to select the photo you want to play, and then press the ENTER button.

•

•

•

The selected fi le will play and slide show will start.

To stop slide show, press the PAUSE (



) button.

You can view the previous/next fi le by pressing the ◄,► buttons during the slideshow mode.

1.

2.

Insert an Audio CD(CD-DA) or an MP3 Disc into the disc tray.

•

•

For an Audio CD, the fi rst track will be played automatically.

- Press the

#$

buttons to move to the previous/next track.

For the MP3/WMA disc, press the

◄► buttons to select Music , then press the

ENTER button.

- Press the

▲▼◄► buttons to select a desired file and press the ENTER button.

- Press the



buttons to move to the previous/next pages.

Press the STOP (



) button to stop playback.

ROOT

JPEG 1

JPEG 2

JPEG 3

642 X 352 2010/01/01

Function DVD/CD Pages Return

✎





NOTE

Some MP3/WMA-CDs may not play, depending on the recording mode.

Table of contents of a MP3-CD varies depending on the MP3/WMA track format recorded on the disc.



The WMA-DRM fi les and DTS CD cannot be played.



When MP3/WMA/CD playing, number key doesn't work.

Rotate Function

G

Press the GREEN(B) or YELLOW(C) button during the

PAUSE mode.

•

•

GREEN(B) Button: Rotate 90° counterclockwise.

YELLOW(C) Button: Rotate 90° clockwise.

✎



NOTE

The maximum resolutions supported by this product are 5120 x 3480 (or 19.0 MPixel) for standard JPEG fi les and 2048 x 1536 (or 3.0

MPixel) for progressive image fi les.

English

23

Basic Functions

Using the Playback Function

Forward/Reverse Search

dB

A

D

Press the



buttons for Search Function.

Step Motion Play

d

D

Press the PAUSE button repeatedly.

•

The picture moves forward one frame each time the button is pressed during playback.

✎



NOTE

No sound is heard during step motion playback.



1

➞



2

➞



3

➞



4



1

➞



2

➞



3

➞



4

✎



NOTE

No sound is played in search mode.



The playback search produces sound only when searching at x1 and x2 speed.

5 Minute Skip function

D

Skipping Scenes/Songs

dB

A

D

Press the

#$

buttons.

•

Each time the button is pressed during playback, the previous or next chapter, track or directory

(fi le) will be played.

•

You cannot skip chapters consecutively.

During playback, press the

◄

,

►

button.

•

Playback skips 5 minutes forward whenever you press the

►

button.

•

Playback skips 5 minutes backward whenever you press the

◄

button.

✎



NOTE

This function is available only for the DivX that contains time information.

Slow Motion Play

d

D

Press the PAUSE (



) button and then

 button for

Slow Motion play.

d



1

➞



2

➞



3

D



1

➞



2

➞



3

✎





NOTE

No sound is heard during slow playback.

Reverse slow playback does not work.

Using the Disc Menu

d

You can view the menus for the audio language, subtitle language, profi le, etc.

1.

2.

During playback, press and hold the

DISC MENU button on the remote control.

Press the

▲▼◄►

buttons to make the desired selection, then press the

ENTER button.

✎



NOTE

Depending on the disc, menu setup items may vary and this menu may not be available.

24

English

Using the Title Menu

d

For DVDs containing multiple titles, you can view the title of each movie.

1.

2.

During playback, press the TITLE button on the remote control.

Press the

▲▼◄►

buttons to make the desired selection, then press the

ENTER button.

✎



NOTE

Depending on the disc, menu setup items may vary and this menu may not be available.

CD/MP3 Repeat

1.

During the CD/ MP3 playback, press the

REPEAT button repeatedly to select the repeat mode you want.

B

(Repeat Off Repeat Disc Repeat All

Random Repeat Section A-B)

A

(Repeat Off Repeat Track

Repeat Dir (Directory) Repeat All Random)

Repeat Playback

dB

A

D

DVD/DivX Repeat

You can repeat the title, chapter or the section(A-B

Repeat) of the DVD/DivX.

Repeat OFF

1.

2.

3.

During DVD/DivX playback, press the REPEAT button on the remote control.

Press the

▲▼

buttons to select a desired repeat mode, then press the ENTER button.

REPEAT

㪋

Press the ▲▼ buttons to select OFF to return to normal play, then press the ENTER button.

A-B Repeat Playback

dB

You can repeatedly play back a designated section of a DVD or CD.

1.

2.

3.

During the DVD disc or CD playback, press the

REPEAT button on the remote control.

For DVD, press the

▲▼

buttons to select A.

For CD press the REPEAT button repeatedly until appears.

Press the ENTER button at the point where you want repeat play to start (A).

4.

Press the ENTER button at the point where you want repeat play to stop (B).

5.

To return to normal playback,

For DVD, press the

▲▼

buttons to select to OFF.

For CD, press the REPEAT button to select to .

✎

NOTE



The A-B Repeat function does not operate with

DivX, MP3 or JPEG discs.

Z

Title

➞

Chapter

➞

A -

➞

Off

D

Title

➞

Folder

➞

All

➞

Off

English

25

Basic Functions

Displaying Disc Information

03/04

001/001

0:00:21

KO 1/2

EN 02/02

1/1

Change Select

1/6

1/1

Off/1

Change Select d

D

TOOLS menu













Title ( ) : To access the desired title when there is more than one in the disc.

For example, if there is more than one movie on a DVD, each movie will be identifi ed as a Title.

Chapter ( ) : Most DVD discs are recorded in chapters so that you can quickly fi nd a specifi c chapter.

Playing time ( ) : Allows playback of the fi lm from a desired time. You must enter the starting time as a reference.

The time search function does not operate on some discs.

Audio ( ): Refers to the fi lm's soundtrack language. A DVD Disc can contain up to 8 audio languages.

Subtitle ( ): Refers to the subtitle languages available in the disc. You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen. A DVD Disc can contain up to

32 subtitle languages.

Angle ( ): When a DVD contains multiple angles of a particular scene, you can use the Angle function.

Selecting the Audio Language

1.

2.

3.

During playback, press the TOOLS button on the remote control.

Press the

▲▼

buttons to select the desired item.

TOOLS

Press the

◄► buttons to make the desired setup change and then press the

ENTER button.

- You may use the number buttons of the remote control to control some items.

4.

To make Disc information disappear, press the

TOOLS button again.

✎



NOTE

If you are playing contents from the tools menu, some functions may not be enabled depending on the disc.



You can also select Dolby Digital or Pro Logic, depending on the disc.



Some tools menus may differ depending on discs and fi les.

26

English d

D

1.

2.

3.

Press the TOOLS button.

Press the

▲▼

buttons to select AUDIO ( ) display.

Press the

◄►

buttons to select the desired audio language.

•

Depending on the of languages on a DVD disc, a different audio language is selected each time the button is pressed.

✎



NOTE

DTS AUDIO doesn't support.

Selecting the Subtitle Language

1.

2.

3.

d

D

Press the TOOLS button.

Press the

▲▼

buttons to select SUBTITLE ( display.

Press the

◄►

buttons to select the desired subtitle language.

•

Depending on the of languages on a DVD disc, a different audio language is selected each time the button is pressed.

)

✎



NOTE

Depending on the disc, the Subtitle and Audio

Language functions may not be available.

Caption Function

D

•

You must have some experience with video extraction and editing in order to use this feature properly.

•

•

To use the caption function, save the caption fi le

(*.smi) in the same fi le name as that of the DivX media fi le (*.avi) within the same folder.

Example. Root Samsung_007CD1.avi

Samsung_007CD1.smi

Up to 100 alphanumeric characters or 50 East

Asian characters (2 byte characters such as

Korean and Chinese) for the fi le name.

•

The subtitle of DivX fi les are *.smi, *.sub, *.srt over

148 kbyte is not supported.

✎



NOTE

The Angle function works only with discs on which multiple angles have been recorded.

DIMMER

You can adjust the brightness of the display on the main unit.

Press the DIMMER button.

GIGA

Sound Mode

The GIGA Sound Function amplifi es bass and improves bass twice as much for you to appreciate powerful real sound.

The GIGA Sound feature will be applied only to the subwoofer.

Press the GIGA button.

✎



NOTE

If GIGA Sound is set to 'ON', other sound fi eld effects will not be applied.



If DOLBY PLII is set to 'ON', the GIGA Sound effect will not be applied.



The GIGA Sound works when in 2-channel LPCM mode only.

DSP (Digital Signal Processor)/EQ

•

DSP (Digital Signal Processor) : DSP modes have been designed to simulate different acoustic environments.

•

EQ : You can select POP, JAZZ, or ROCK etc. to optimize the sound for the genre of music you are playing.

Angle Function

d

This function allows you to view the same scene in different angles.

1.

2.

3.

Press the TOOLS button.

Press the

▲▼

buttons to select ANGLE ( display.

Press the

◄►

buttons to select the desired angle.

)

Press the DSP/EQ button.

DSP / EQ

㪉

POPS, JAZZ, ROCK

➞

STUDIO

➞

CLUB

➞

HALL

➞

MOVIE

➞

CHURCH

➞

OFF

✎



NOTE

The DSP/EQ function is only available in Stereo mode.



The DSP/EQ function is not available while playing

AC3 signal in 2.1 channel mode.

English

27

Basic Functions

S/W LEVEL

You can also press the S/W LEVEL button on the remote control and use the

◄ or

► buttons to adjust the level of subwoofer.

Press the S/W LEVEL button.

•

Automatic Tuning : Press the STOP (



) button to select MANUAL and then press and hold the

TUNING band.

( ) button to automatically search the

Dolby Pro Logic II Mode

You can select the desired Dolby Pro Logic II audio mode, P.Bass or MP3 Enhancement function.

Setting Mono/Stereo

Press the MO/ST button.

•

Each time the button is pressed, the sound switches between STEREO and

MONO .

•

In a poor reception area, select MONO for a clear, interference-free broadcast.

Press the PL II button.

MP3 ENHANCE ON

➞

POWER BASS

ON

➞

POWER BASS OFF

➞

MUSIC

➞

MOVIE

➞

PROLOG

➞

MATRIX

➞

STEREO

㪈

P L

✎



NOTE

When selecting Pro Logic II mode, connect your external device to the AUDIO INPUT jacks

(L and R) on the product. If you connect to only one of the inputs (L or R), you cannot listen to surround sound.



The Pro Logic II function is only available in

Stereo mode.



The Pro Logic II function is not available while playing AC3 signal in 2.1 channel mode.

Listening to Radio

Presetting Stations

Example : Presetting FM 89.10 in the memory

1.

2.

3.

4.

5.

6.

Press the

Press the

<89.10>.

FUNCTION

TUNING (

,

,

button to select

.

FM

) buttons to select

.

Press the TUNER MEMORY button.

•

Number fl ashes on the display.

Press the TUNING (

,

,

.

) buttons to select preset number.

•

You can select between 1 and 15 presets.

Press the TUNER MEMORY button again.

•

Press the TUNER MEMORY button before number disappears from the display.

•

Number disappears from the display and the station is stored in memory.

To preset another station, repeat steps 2 to 5.

Using buttons on the Remote Control

1.

2.

Press the FUNCTION button to select FM .

Tune in to the desired station.

•

•

Preset Tuning 1 : You must fi rst add a desired frequency as a preset. Press the STOP (



) button to select PRESET and then press the

TUNING ( ) button to select the preset station.

Manual Tuning : Press the STOP (



) button to

( select MANUAL and then press the TUNING

) button to tune in to a lower or higher frequency.

28

English

Advanced Functions

USB Function

USB Recording

Playing Media Files using the

USB Host Feature

You can enjoy media fi les such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in high quality video with 5.1 channel sound by connecting the storage device to the USB port of the product.

1.

2.

3.

Connect the USB device to the USB port on the front panel of the product.

Press the FUNCTION button to select USB.

•

USB appears on the display screen and then disappears.

Press the

◄►

buttons to select Videos , Photo or Music .

- Select a fi le to play.

Safe USB Removal

5V 500mA

To prevent damage to the memory stored in the

USB device, perform safe removal before disconnecting the USB cable.

•

Press the YELLOW(C) button.

- REMOVE will appear on the display.

•

Remove the USB cable.

✎



NOTE

To listen to your music fi les with 5.1 channel sound, you must set the Dolby Pro Logic II mode to Matrix. (See page 28)



Remove the USB cable from the USB port slowly. Otherwise, it may cause damage to the

USB port.

While playing CD-DA (Compact Disc Digital Audio) using the USB Recording function, you can record the audio source in the USB memory.

1.

2.

3.

Connect the USB device to your product.

Insert the CD-DA disc into the CD tray.

Press the USB REC button on the remote control.

•

To start ripping the current track, press the USB REC button on the remote control while the system is playing a track or stopped temporarily.

•

To record the entire CD, press and hold the

USB REC button on the remote control.

- "FULL CD RIPPING" appears on the display and recording starts.

4.

Press the STOP (



) button to stop recording.

•

When USB recording of a CD is completed, you will fi nd a new folder named “RECORDING” in the USB drive. The contents will be saved in the

✎

 folder in the MP3 format.

NOTE

Do not disconnect the USB connection or the power cable during the USB Recording.

Otherwise, it may cause damage to the data.















To stop USB Recording, press the STOP button and disconnect the USB device after the system stops playing the CD completely.

If you disconnect the USB connection during the USB Recording, the system will turn off and you will not be able to delete the recorded fi le.

If you connect the USB device to the system while it is playing a CD, the system stops temporarily and will play again.

DTS-CDs cannot be recorded.

If the recording duration is less than 5 seconds, a recording fi le may not be created.

USB Recording works only if the USB device is formatted in the FAT fi le system. (The NTFS fi le system is not supported.)

The audio signal will not be output during USB recording of the CD.

When HDMI AUDIO is set to On, the USB

Recording function is not supported.

English

29

Other Information

Troubleshooting

Refer to the chart below when this product does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, turn off the product, disconnect the power cord, and contact the nearest authorized dealer or Samsung Electronics Service Centre.

Symptom

I cannot eject the disc.

Playback does not start.

Check/Remedy

• Is the power cord plugged securely into the outlet?

• Turn off the power and then turn it back on.

• Check the region number of the DVD.

DVD discs purchased from abroad may not be playable.

• CD-ROMs and DVD-ROMs cannot be played on this product .

• Make sure that the rating level is correct.

• Are you using a deformed disc or a disc with scratches on the surface?

• Wipe the disc clean.

Playback does not start immediately when the

Play/Pause button is pressed.

Sound is not produced.

• No sound is heard during fast playback, slow playback, and step motion playback.

• Are the speakers connected properly? Is the speaker setup correctly customized?

• Is the disc severely damaged?

Sound can be heard only from a few speakers and not all 6.

Dolby Digital 5.1 CH Surround

Sound is not produced.

• On certain DVD discs, sound is output from the front speakers only.

• Check if the speakers are connected properly.

• Adjust the volume.

• When listening to a CD, radio or TV, sound is output to the front speakers only.

Select "PROLOG" by pressing PL II (Dolby Pro Logic II) on the remote control to use all six speakers.

• Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is produced only if the disc is recorded with 5.1 channel sound.

• Is the audio language correctly set to Dolby Digital 5.1-CH in the information display?

The remote control does not work.

• Disc is rotating but no picture is produced.

• Picture quality is poor and picture is shaking.

• Is the remote control being operated within its operation range of angle and distance?

• Are the batteries drained?

• Have you selected the mode (DVD RECEIVER/TV) functions of the remote control (DVD RECEIVER/TV) correctly?

• Is the TV power on?

• Are the video cables connected properly?

• Is the disc dirty or damaged?

• A poorly manufactured disc may not be playable.

Audio language and subtitles do not work.

• Audio language and subtitles will not work if the disc does not contain them.

The Disc/Title menu screen does not appear even when the Disc/Title function is selected.

Aspect ratio cannot be changed.

• Are you using a disc that does not contain menus?

• You can play 16:9 DVDs in 16:9 WIDE mode, 4:3 LETTER BOX mode, or 4:3 PAN

SCAN mode, but 4:3 DVDs can be seen in 4:3 ratio only. Refer to the DVD disc jacket and then select the appropriate function.

30

English

Symptom

• The product is not working.

(Example: The power goes out or the front panel key doesn't work or a strange noise is heard.)

• The product is not working normally.

The rating level password has been forgotten.

Can't receive radio broadcast.

Check/Remedy

• Press and hold the STOP (



) button on the remote control for longer than

5 seconds with no disc (reset function).

Using the RESET function will erase all stored settings.

Do not use this unless necessary.

• While “NO DISC” message appears on the display of the product, press and hold the remote control's STOP (



) button for longer than 5 seconds. “ INIT ” appears on the display and all settings will return to the default values.

And then press the POWER button.

Using the RESET function will erase all stored settings.

Do not use this unless necessary.

• Is the antenna connected properly?

• If the antenna's input signal is weak, install an external FM antenna in an area with good reception.

Language code list

Enter the appropriate code number for OTHERS in the Disc Menu, Audio and Subtitle. (See page 21).

Code

1027

1028

1032

1039

1044

1045

1051

1052

Language

Afar

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

1067

1070

1079

1093

1097

1053 Bashkir

1057 Byelorussian

1059

1060

1069

Bulgarian

Bihari

Bislama

1066

Bengali;

Bangla

Tibetan

Breton

Catalan

Corsican

Czech

1103

1105

1109

Welsh

Danish

German

1130 Bhutani

1194

1196

1203

1209

1217

1226

1229

1233

1235

Code

1142

1144

1145

1149

1150

1151

1157

1165

1166

1171

1174

1181

1183

1186

Galician

Guarani

Gujarati

Hausa

Hindi

Croatian

Hungarian

Armenian

Interlingua

Language

Greek

English

Esperanto

Spanish

Estonian

Basque

Persian

Finnish

Fiji

Faeroese

French

Frisian

Irish

Scots Gaelic 1300

Code

1239

1245

1248

1253

1254

1257

1261

1269

1283

1287

1297

1298

1299

1301

1305

1307

1311

1313

1326

1327

1332

1334

Language

Interlingue

Inupiak

Indonesian

Icelandic

Italian

Hebrew

Japanese

Yiddish

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Canada

Korean

Kashmiri

Kurdish

Kirghiz

Latin

Lingala

Laothian

Lithuanian

Latvian,

Lettish

Code

1345

1347

1349

1350

1352

1353

1356

1357

1358

1363

1365

1369

1376

1379

Language

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

Maltese

Burmese

Nauru

Nepali

Dutch

Norwegian

1393

1403

1408

1417

1428

Occitan

(Afan) Oromo

Oriya

Punjabi

Polish

1435 Pashto, Pushto 1516

1436

1463

1481

Portuguese

Quechua

Rhaeto-

Romance

1517

1521

1525

1511

1512

1513

1514

1515

Code

1503

1505

1506

1507

1508

Language Code

1482

1483

1489

1491

1495

1498

1501

Kirundi

Romanian

Russian

Kinyarwanda

Sanskrit

Sindhi

Sangro

1502 Serbo-Croatian 1538

1527

1528

1529

1531

1532

1534

1535

Singhalese

Slovak

Slovenian

Samoan

Shona

1539

1540

1543

1557

1564

1509 Somali 1572

Albanian

Serbian

Siswati

Sesotho

Sundanese

Swedish

Swahili

Tamil

Tegulu

1581

1587

1613

1632

1665

1684

1697

English

31

Language

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Setswana

Tonga

Turkish

Tsonga

Tatar

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Wolof

Xhosa

Yoruba

Chinese

Zulu

Other Information

Specifi cations

General

FM Tuner

Disc

Video Output

Video/Audio

Amplifier

Weight

Dimensions

Operating Temperature Range

Operating Humidity Range

Signal/noise ratio

Usable sensitivity

Total harmonic distortion

DVD (Digital Versatile Disc)

CD : 12 cm (COMPACT DISC)

CD : 8cm (COMPACT DISC)

Composite Video

Component Video

HDMI

Front speaker output

Center speaker output

Surround speaker output

Subwoofer output

Frequency range

S/N Ratio

Channel separation

Input sensitivity

2.2 Kg

430 (W) x 59 (H) x 249 (D) mm

+5°C~+35°C

10 % to 75 %

70 dB

10 dB

0.5 %

Reading Speed : 3.49 ~ 4.06 m/sec.

Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.

Reading Speed : 4.8 ~ 5.6 m/sec.

Maximum Play Time : 74 min.

Reading Speed : 4.8 ~ 5.6 m/sec.

Maximum Play Time : 20 min.

480i(576i)

1 channel : 1.0 Vp-p (75 load)

480i(576i)

Y : 1.0 Vp-p (75 load)

Pr : 0.70 Vp-p (75 load)

Pb : 0.70 Vp-p (75 load)

1080p, 1080i, 720p, 480p(576p)

51W x 2(3 Ω )

51W(3

75W(3

Ω

51W x 2(3

Ω

)

)

20Hz~20KHz

65dB

60dB

(AUX)800mV

Ω

)

*: Nominal specifi cation

- Samsung Electronics Co., Ltd reserves the right to change the specifi cations without notice.

- Weight and dimensions are approximate.

- Design and specifi cations are subject to change without prior notice.

- For the power supply and Power Consumption, refer to the label attached to the product.

32

English

HT-D350

Speaker

Speaker system

Impedance

Frequency range

Output sound pressure level

Rated input

Maximum input

Dimensions (W x H x D)

Weights

5.1ch speaker system

Front/ Surround

3

140Hz~20KHz

86dB/W/M

Center

3

140Hz~20KHz

86dB/W/M

51W

102W

51W

102W

Front/ Surround : 84 x 104.5 x 68.5 mm

Center : 84 x 104.5 x 68.5 mm

Subwoofer : 168 x 350 x 285 mm

Front/ Surround: 0.4 Kg, Center : 0.23 Kg

Subwoofer : 3.6 Kg

Subwoofer

3

40Hz~160Hz

88dB/W/M

75W

150W

HT-D355

Speaker

Speaker system

Impedance

Frequency range

Output sound pressure level

Rated input

Maximum input

Dimensions (W x H x D)

Weights

5.1ch speaker system

Front/ Surround

3

140Hz~20KHz

86dB/W/M

Center

3

140Hz~20KHz

86dB/W/M

Subwoofer

3

40Hz~160Hz

88dB/W/M

51W

102W

51W

102W

75W

150W

Front/ Surround : 90 x 1100 x 119 mm (stand base : 250 x 250)

Center : 360 x 74.5 x 68.5 mm

Subwoofer : 168 x 350 x 285 mm

Front/ Surround: 3.43 Kg, Center : 0.96 Kg

Subwoofer : 3.6 Kg

English

33

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Area

`

North America

Canada

Contact Centre



1-800-SAMSUNG (726-7864)

Web Site www.samsung.com

Mexico

U.S.A

`

Latin America

01-800-SAMSUNG (726-7864) www.samsung.com

1-800-SAMSUNG (726-7864) www.samsung.com

Argentine

Brazil

Chile

Colombia

0800-333-3733

0800-124-421 / 4004-0000

800-SAMSUNG (726-7864)

01-8000112112 www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

Costa Rica

Dominica

Ecuador

El Salvador

Guatemala

Honduras

Jamaica

Nicaragua

Panama

Peru

Puerto Rico

Trinidad &

Tobago

Venezuela

`

Europe

Albania

0-800-507-7267

1-800-751-2676

1-800-10-7267

800-6225

1-800-299-0013

800-7267

0-800-777-08

1-800-682-3180

1-800-SAMSUNG (726-7864)

0-800-100-5303 www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

800-7919267 www.samsung.com

1-800-234-7267

00-1800-5077267 www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

Austria

Belgium

Bosnia

Bulgaria

Croatia

Czech

Denmark

Finland

France

Germany

42 27 5755

0810 - SAMSUNG (7267864,

€ 0.07/min)

02-201-24-18

05 133 1999

07001 33 11 www.samsung.com/ be (Dutch) www.samsung.com/ be_fr (French)

www.samsung.com

062 SAMSUNG (062 726 7864) www.samsung.com

800-SAMSUNG (800-726786)

Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, 180 00, Praha 8

70 70 19 70

030 - 6227 515

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

01 48 63 00 00

01805 - SAMSUNG (726-7864

€ 0,14/Min)

06-80-SAMSUNG (726-7864)

800-SAMSUNG (726-7864) www.samsung.com

www.samsung.com

www.samsung.com

Hungary

Italia

Kosovo

Luxemburg

Macedonia

Montenegro

Netherlands

Norway

Poland

Portugal

Rumania

+381 0113216899

261 03 710

023 207 777

www.samsung.com

-

020 405 888

0900-SAMSUNG

(0900-7267864) (€ 0,10/Min)

815-56 480

1. 08010 SAMSUNG (72678) - doar din reţeaua Romtelecom, tarif local

2. 021.206.01.10 - din orice reţea, tarif normal www.samsung.com

www.samsung.com

0 801 1SAMSUNG (172678)

/ 022-607-93-33 www.samsung.com

80820-SAMSUNG (726-7864) www.samsung.com

www.samsung.com

Area

Serbia

Slovakia

Spain

Sweden

Switzerland

U.K

Eire

Lithuania

Latvia

Estonia

`

CIS

Russia

Georgia

Armenia

Azerbaijan

Kazakhstan

Uzbekistan

Kyrgyzstan

Tadjikistan

Contact Centre



8000-7267

800-7267

Web Site

0700 Samsung (0700 726

7864) www.samsung.com

0800-SAMSUNG (726-7864) www.samsung.com

902-1-SAMSUNG (902 172 678) www.samsung.com

0771 726 7864 (SAMSUNG)

0848-SAMSUNG (7267864,

CHF 0.08/min) www.samsung.com

www.samsung.com/ch www.samsung.com/ ch_fr/(French) www.samsung.com

0330 SAMSUNG (7267864)

0818 717100

8-800-77777 www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

Ukraine

Belarus

Moldova

`

Asia Pacifi c

Australia

New Zealand

China

Hong Kong

India

Indonesia

Japan

Malaysia

Philippines

Singapore

Thailand

Taiwan

Vietnam

`

Middle East

Bahrain

Egypt

Jordan

Morocco

Oman

Saudi Arabia

Turkey

U.A.E

`

Africa

Nigeria

South Africa

8-800-555-55-55

8-800-555-555

0-800-05-555

088-55-55-555

8-10-800-500-55-500

(GSM: 7799)

8-10-800-500-55-500

00-800-500-55-500

8-10-800-500-55-500

0-800-502-000

810-800-500-55-500

00-800-500-55-500

1300 362 603

0800 SAMSUNG (0800 726 786)

-

www.samsung.com

www.samsung.com

-

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.ua www.samsung.com/ ua_ru www.samsung.com

www.samsung.com

400-810-5858 / 010-6475 1880 www.samsung.com

(852) 3698 4698 www.samsung.com/hk www.samsung.com/ hk_en/

3030 8282 / 1800 110011 /

1800 3000 8282 / 1800 266 8282

0800-112-8888 /

021-5699-7777

0120-327-527

1800-88-9999

1-800-10-SAMSUNG(726-7864) /

1-800-3-SAMSUNG(726-7864) /

1-800-8-SAMSUNG(726-7864) /

02-5805777 www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

1800-SAMSUNG (726-7864) www.samsung.com

1800-29-3232 / 02-689-3232 www.samsung.com

0800-329-999

1 800 588 889 www.samsung.com

www.samsung.com

8000-4726

08000-726786

800-22273

080 100 2255

800-SAMSUNG (726-7864)

9200-21230

444 77 11

800-SAMSUNG (726-7864)

0800-SAMSUNG (726-7864)

0860-SAMSUNG (726-7864 ) www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com

www.samsung.com