advertisement
COLOUR
TELEVISION
CS21A0/21A8/21A9/21A11/
CS21K10/21M6/21M7/21S8
CS2502/25D8/25M6/25V5/25V10
CS2902/29D6/29D7/29D8/29U2/29V5
CS29V10/29K3/29K5/29K10/29M6
Owner’s Instructions
Before operating the unit, please read this manual thoroughly, and retain it for future reference.
REMOTE CONTROL
ON-SCREEN MENUS
ENJOY GAME
(depending on the model)
TELETEXT FUNCTION
(depending on the model)
ENG
ENG
Safety Instructions
The following illustrations represent the precautions to be taken when using and moving your television.
10%
H
35¡
H
75%
5¡
Do NOT expose the television to extreme temperature conditions or to extreme humidity conditions.
Do NOT expose the television to direct sunlight.
Do NOT expose the television to any liquids.
If the television is broken, do not try to repair it yourself. Contact qualified service personnel.
During a storm conditions
(especially when there is lightning) unplug the television from the mains socket and aerial.
If the remote control is not used for a long period of time, remove the batteries and store it in a cool, dry place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
➢
Please use a soft and dry cloth (not containing volatile matter) when you clean the TV.
Caution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO PREVENT ELECTRICAL SHOCK, DO
NOT REMOVE REAR COVER, NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING:
TO PREVENT DAMAGE WHICH MAY
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
The lightning flash and arrow head within the triangle is a warning sign alerting you of
“dangerous voltage” inside the product.
The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product.
☛
The main voltage is indicated on the rear of the TV set and the frequency is
50 or 60Hz.
2
Contents
◆ PREPARING YOUR TELEVISION
■ Safety Instructions ................................................................................................
■
■
■
■
■
■
■
■
■
■
■
■
■
Caution .................................................................................................................
Control Panels ......................................................................................................
Connection Panels ...............................................................................................
Viewing Picture From External Sources ...............................................................
Infrared Remote Control (All Functions Except Teletext) .....................................
Infrared Remote Control (Teletext Functions) ......................................................
Inserting the Batteries in the Remote Control.......................................................
Connecting the Aerial (or Cable Television Network)...........................................
Switching Your Television On and Off..................................................................
Placing Your Television in Standby mode ............................................................
Plug & Play Feature (depending on the model)....................................................
Viewing the Demonstration...................................................................................
Choosing Your Language.....................................................................................
◆ SETTING UP THE CHANNELS
■ Storing the Channels Automatically......................................................................
■
■
■
■
■
Skipping Unwanted Channels ..............................................................................
Storing the Channels Manually.............................................................................
Fine tuning Channel Reception ............................................................................
Sorting the Stored Channels ................................................................................
Selecting a Channel Numbered Ten or Over .......................................................
◆ USING THE TELEVISION
■ Changing the Picture Standard ............................................................................
■
■
■
■
■
■
■
■
Adjusting the Picture Settings...............................................................................
Setting the Digital Noise Reduction ......................................................................
Setting the Blue Screen........................................................................................
Selecting the Picture Format ................................................................................
Using the Tilt Control Feature (depending on the model).....................................
Changing the Sound Standard (depending on the model) ...................................
Adjusting the Sound Settings ...............................................................................
Extra Sound Settings............................................................................................
- Auto Volume
- Melody
- Pseudo Stereo/Virtual Surround
- Turbo Sound
■
■
■
■
■
■
■
■
Selecting the Sound Mode (depending on the model) .........................................
Adjusting the Volume............................................................................................
Switching the Sound Off Temporarily ...................................................................
Setting the Sleep Timer (depending on the model) ..............................................
Setting and Displaying the Current Time (depending on the model)....................
Switching the Television On and Off Automatically (depending on the model) ...
Activating the Child Lock ......................................................................................
Enjoying Games (depending on the model) ........................................................
◆ USING THE TELETEXT FUNCTION (depending on the model)
■ Teletext Decoder ..................................................................................................
■
■
■
■
Displaying Teletext Information ............................................................................
Selecting a Specific Teletext Page .......................................................................
Using FLOF to Select a Teletext Page .................................................................
Storing Teletext Pages .........................................................................................
◆ INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
■ Automatic Degaussing to Remove Color Patches................................................
■ Troubleshooting: Before Contacting Service Personnel.......................................
Symbols
☛ ➢
Press Important Note
3
34
34
35
36
36
14
15
16
18
19
20
23
23
24
25
26
20
21
22
22
30
31
32
33
27
28
28
29
10
11
11
12
13
13
9
10
7
8
4
5
2
2
37
37
ENG
ENG
Control Panels
➢
The actual configuration on your TV may be different, depending on your model.
Œ INPUT SOURCE SELECTION
´ MENU DISPLAY
ˇ VOLUME ADJUSTMENT
¨ CHANNEL SELECTION
ˆ STANDBY INDICATOR
Ø REMOTE CONTROL SENSOR
∏ POWER ON/OFF
➣
Using the Buttons on the Panel
If the remote control no longer works or you have lost it, you can use controls on the panel of the TV to:
◆ Switch on the TV when it is in Standby mode and select channels ( ▼ CH ▲ )
◆ Access the main menu ( MENU )
◆ Adjust the volume ( - VOL + )
◆ Switch among Video input modes ( TV/VIDEO )
4
Connection Panels
➢
The actual configuration on your TV may be different, depending on your model.
Side of the TV Front of the TV
Œ AUDIO/VIDEO INPUT
´ HEADPHONE CONNECTOR
Œ Connecting External A/V Devices (INPUT)
The RCA (VIDEO + AUDIO-L and R) connectors are used for equipment such as camcorders, video disc players and some video game devices.
➣
◆ When both the side (or front) and rear connectors are connected to external equipment, the side
(or front) AV has the priority.
◆ When using the mono equipment such as camcorders, video disc players and some video game devices, connect to the “AUDIO-L” input connector.
´ Connecting Headphones
- You can connect a set of headphones to your television if you wish to watch a television programme without disturbing the other people in the room.
- Prolonged use of headphones at a high volume may damage your hearing.
☛
Whenever you connect an audio or video system to your television, ensure that all elements are switched off.
Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions.
ENG
5
ENG
Connection Panels
(continued)
➢
The actual configuration on your TV may be different, depending on your model.
Rear of the TV
MONITOR
-OUT
VIDEO
(MONO)
L-AUDIO-R
INPUT 2
INPUT 1
2
RGB
1
MONITOR
-OUT
VIDEO
(MONO)
L-AUDIO-R
INPUT 2
INPUT 1
Ϋ Connecting External A/V Devices (INPUT/OUTPUT)
The connectors (RCA or SCART) are used for equipment such as video disc players, video game devices, camcorder and VCR.
ˇ Connecting DVD
The RCA (Y + Pb + Pr + AUDIO-L and R) connectors are used for a DVD.
➣
When using the mono equipment such as camcorders, video disc players and some video game devices, connect to the “AUDIO-L” input connector.
6
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems, you can view the different sources by selecting the appropriate input.
1 Check that all the necessary connections have been made.
2
Switch the television on and if necessary, press the VIDEO ( ) button one or more times until the required input is displayed.
➢
Depending on the source selected, the pictures may appear automatically.
➢
To watch television programmes again, press the TV ( ) button and select the number of the channel required.
ENG
7
ENG
Infrared Remote Control (All Functions Except Teletext)
➣
Buttons and markings are subject to change.
POWER
DIRECT CHANNEL SELECTION
ONE/TWO-DIGIT CHANNEL
SELECTION
VOLUME INCREASE
TEMPORARY SOUND SWITCH-OFF
VOLUME DECREASE
TUNER/CABLE NETWORK
SELECTION
MENU DISPLAY
MOVE TO THE REQUIRED MENU
OPTION/
ADJUST AN OPTION VALUE
RESPECTIVELY
SOUND MODE SELECTION
(OPTION)
GAME DISPLAY (OPTION)
TURBO SOUND SELECTION
(OPTION)
SOUND MENU DISPLAY
(OPTION)
SWITCH REPEATEDLY BETWEEN
THE LAST TWO CHANNELS
DISPLAYED
NEXT CHANNEL
EXTERNAL INPUT SELECTION
PREVIOUS CHANNEL
ON-SCREEN DISPLAY
EXIT FROM ANY DISPLAY
CHANGE CONFIRMATION
PICTURE SIZE
AUTOMATIC SWITCH-OFF
PICTURE STANDARD
SOUND STANDARD (OPTION)
➣
Operation of remote control may be affected by bright artificial light near to the TV set.
8
Infrared Remote Control (Teletext Functions)
➣
Buttons and markings are subject to change.
TELETEXT HOLD
PROGRAMME SELECTION BY NAME
TELETEXT SUB-PAGE
TELETEXT DISPLAY/MIX
FASTEXT TOPIC SELECTION
TELETEXT NEXT PAGE
LIST/FLOF MODE SELECTION
TELETEXT PREVIOUS PAGE
TELETEXT REVEAL
PICTURE SIZE
TELETEXT STORE
ENG
9
ENG
Inserting the Batteries in the Remote Control
You must insert or replace the batteries in the remote control when you :
◆ Purchase the television.
◆ Find that the remote control is no longer operating correctly.
1 Remove the cover of the remote control by pressing the symbol
( ) and pulling the cover in the direction of the arrow.
2 Insert batteries, taking care to respect the polarities:
◆
◆
+ on the battery with + on the remote control
-
on the battery with
-
on the remote control
3
Replace the cover by pushing it in the direction of the arrow.
Connecting the Aerial (or Cable Television Network)
To view television channels correctly, a signal must be received by the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
Plug the aerial or cable network input cable to the 75Ω coaxial socket on the rear of the television.
75 Ω
Rear of TV
10
Cable
Television
Network
Switching Your Television On and Off
The mains lead is attached to the rear of the television.
1
Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz.
2 Press the “ ” (ON/OFF) button on the front of the television.
Result: The Standby indicator lights up on the front panel.
3 Press the POWER ( ) button on the remote control to switch the television on.
Result: The programme that you were watching last is reselected automatically.
4 To switch your television off, press the “ ” (ON/OFF) button again on the front of the television.
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you turn it on.
1 Press the POWER ( ) button on the remote control.
Result: The screen is turned off and the Standby indicator on the front of the television lights up.
2 To switch the screen back on, simply press the POWER ( ) button again on the remote control.
➣
Do not leave your television in standby mode for long periods of time (when you are away on holiday, for example).
In this case, you should switch it off completely.
11
ENG
ENG
Plug & Play Feature
(depending on the model)
Plug & Play
Ant. Input Check
Auto Store Exit
P 1
471 MHz 48 %
Exit
Time
Clock
Move Exit
11 : 35 AM
ENJOY YOUR WATCHING
Function
Language : English
Time
Plug & Play
√
√
Blue Screen
Child Lock
√
Demonstration
√
: Off
Select Enter Exit
When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock.
1
If the television is in Standby mode, press the POWER ( ) button on the remote control.
Result: The message Plug & Play is displayed. It flickers for a little while and then the “Language” menu is automatically displayed.
2
Press the
▲ or ▼ button to select required language. Press the
MENU button to enter the language, and then the message Ant.
Input Check is displayed.
➣
If any language is not selected on the Language menu, the
Language menu will be displayed about 30 seconds later.
3 Make sure that the antenna is connected to the TV. And then press the œ or √ button to store the channels (refer to “Storing the
Channels Automatically” on page 14).
Result: The horizontal bar is displayed, and then channels are stored in an order which reflects their positions in the frequency range.
4 When searching and storing is complete, the Time menu is displayed.
5
Press the œ or √ button to move to the hour or minute. Set the hour or minute by pressing the
▲ or ▼ button (refer to “Setting and
Displaying the Current Time” on page 30).
6
When you have finished, press the MENU ( ) button.
Result: The message ENJOY YOUR WATCHING is displayed, and then the channel which has been stored will be activated.
7 If you want to reset this feature...
1 Press the MENU button.
2 Press the
▲ or ▼ button to select the
Function , and then press the œ or √ button.
3 Select the Plug & Play by pressing the
▲ or ▼ button, and then press the œ or √ button.
Result: The message Plug & Play is displayed.
12
Viewing the Demonstration
To become familiar with the various menus provided by your television, you can view the inbuilt demonstration.
1 Press the MENU button.
2 Press the
▲ or ▼ button to select the
Function and press the œ or
√ button.
3 Press the
▲ or ▼ button to select the
Demonstration and press the œ or √ button.
Result: Each of the menu options is displayed in turn.
4 When you wish to exit from the demonstration, press the EXIT ( ) button.
Function
Language : English
Time
√
Plug & Play
√
Blue Screen
Child Lock
√
Demonstration
√
: Off
Select Enter Exit
ENG
Choosing Your Language
When you start using your television for the first time, you must select the language which will be used for displaying menus and indications.
1 Press the MENU button.
2 Press the
▲ or ▼ button to select the
Function and press the œ or
√ button.
Result: The Language is selected.
3 Press the œ or √ button again.
Result: The languages available are listed.
4 Select a particular language by pressing the
▲ or ▼ button repeatedly.
5 When you have finished, press the EXIT ( ) button or, press the
MENU ( ) button repeatedly to return to normal viewing.
Function
Language : English
Time
Plug & Play
√
√
Blue Screen
Child Lock
√
Demonstration
√
: Off
Select Adjust Exit
13
ENG
Storing the Channels Automatically
Mode
Adjust
Digital NR
Tilt
Picture
Custom
√
: Off
: 0
√
Select Enter Exit
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Channel
√
√
√
√
√
Select Enter Exit
P 1
471 MHz 48 %
Exit
Sort
From
To
Store
Channel
: P 1
: P--
: ?
Select Adjust Exit
You can scan the frequency ranges available on your television and in your country and store all the channels found automatically.
The channels are stored in the order in which they appear in the frequency bands. It is possible that the automatically allocated numbers may not correspond to those by which you wish to identify the channels. If this is the case, refer to “Sorting the Stored
Channels” on page 19.
1 Press the MENU button.
2 Press the
▲ or ▼ button to select the
Channel .
3 Press the œ or √ button to select the Auto Store .
4 Press the œ or √ button again.
Result: The horizontal bar is displayed, and then channels are stored in an order which reflects their positions in the frequency range. Finally, the search will end automatically.
5 When searching and storing is complete, the Sort menu is displayed.
To...
Then...
Sort the stored channels into the desired numerical order
Go to Step 4 of the “Sorting the Stored Channels” procedure on page 19.
Exit the channel store function without sorting the channels
Press the MENU ( ) button repeatedly until the menus isappear.
➣
If sound does not work regularly after storing channels, select the sound system which best corresponds in Manual Store menu (refer to page 16~17).
14
Skipping Unwanted Channels
You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those you have chosen to skip are not displayed.
All channels that you do not specifically choose to skip are displayed during scanning.
1
Press the MENU button.
2
Press the
▲ or ▼ button to select the
Channel and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the
Add/Erase and press the œ or √ button.
Result: The Add/Erase menu is displayed.
4 Press the
▲ or ▼ button to select the required channel.
5 To add or erase the desired channel by pressing the œ or √ button.
6 When you have finished adding and erasing channels, press the
EXIT ( ) button or, press the MENU ( ) button repeatedly to return to normal viewing
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Channel
√
√
√
√
√
Select Enter Exit
Add/Erase
P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
Channel
Select Adjust Exit
Add/Erase
P 1 : Erased
P 2 : Added
P 3 : Added
P 4 : Added
Channel
Select Adjust Exit
ENG
15
ENG
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Channel
√
√
√
√
√
Select Enter Exit
Manual Store
Color system
Sound system
Search
Prog. No.
Store
Channel
: AUTO
: B/G
: -/+
: 18
: ?
Select Adjust Exit
Manual Store
Color system
Sound system
Search
Prog. No.
Store
Channel
: AUTO
: B/G
: -/+
: 18
: ?
Select Adjust Exit
Manual Store
Color system
Sound system
Search
Prog. No.
Store
Channel
: AUTO
: B/G
: -/+
: 18
: ?
Select Adjust Exit
Storing the Channels Manually
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found.
◆ The number by which you wish to identify each stored channel.
1
Press the MENU button.
2 Press the
▲ or ▼ button to select the
Channel and press the œ or
√ button.
3 Press the
▲ or ▼ button to select the
Manual Store and press the
œ or √ button.
Result: The “Manual Store” menu is displayed with the Color
System selected.
4 Press the œ or √ button repeatedly until the color is of the best quality.
Result: The Color System is changed.
AUTO
↔ PAL ↔ SECAM ↔ NTSC4.43 ↔ NTSC3.58
➣
NTSC4.43 is a “trick” playback mode used by special VCR’s to play PAL-recorded videos in NTSC mode.
5 Press the
▲ or ▼ button to select the
Sound System and press the
œ or √ button repeatedly until the sound is of the best quality.
Result: The Sound System is changed.
B/G ↔ I ↔ D/K ↔ M
➣
If sound does not work regularly after storing channels, select the sound system which best corresponds.
6 To start the search, select the Search and then press the œ or √ button.
Result: The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen.
16
Storing the Channels Manually
(continued)
7 To assign a programme number to the channel, select the
Prog.No.
. Press the œ or √ button until you find the correct number.
8 To store the channel and associated programme number, select the Store and press the œ or √ button.
Result: OK is displayed.
9 Repeat Steps 6 to 8 for each channel to be stored.
10 When you have finished manual storage, press the EXIT ( ) button or, press the MENU ( ) button repeatedly to return to normal viewing
Manual Store
Color system
Sound system
Search
Prog. No.
Store
Channel
: AUTO
: B/G
: -/+
: 18
: ?
Select Adjust Exit
Manual Store
Color system
Sound system
Search
Prog. No.
Store
Channel
: AUTO
: B/G
: -/+
: 18
: OK
Select Adjust Exit
ENG
17
ENG
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Channel
√
√
√
√
√
Select Enter Exit
Channel
Fine Tune
Tune
Store
Erase
: -/+
: ?
: ?
Select Adjust Exit
Fine tune
Channel
Fine Tune
Tune
Store
Erase
: -/+
: OK
: ?
Select Adjust Exit
Channel
Fine Tune
Tune
Store
Erase
: -/+
: ?
: OK
Select Adjust Exit
Fine tuning Channel Reception
If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to finetune the channel manually.
1
Press the MENU button.
2
Press the
▲ or ▼ button to select the
Channel and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the
Fine Tune and press the œ or √ button.
Result: The Fine Tune menu is displayed with the Tune selected.
4 To...
obtain a sharp and clear picture and good sound quality memorise adjusted picture or sound erase adjusted picture or sound
Press the...
◆ œ or √ button.
Result: The horizontal bar’s cursor moves to the left or right.
◆ ▲ or ▼ button to select the
◆ œ or √ button.
Store .
Result: OK is displayed.
◆ ▲ or ▼ button to select the
◆ œ or √ button.
Erase .
Result: OK is displayed.
5 When you have finished, press the EXIT ( ) button or, press the
MENU ( )button repeatedly to return to normal viewing.
18
Sorting the Stored Channels
You can exchange the numbers of two channels, in order to:
◆ Modify the numeric order in which the channels have been automatically stored.
◆ Give easily remembered numbers to the channels that you watch most often.
1 Press the MENU button.
2 Press the
▲ or ▼ button to select the
Channel and press the œ or
√ button.
3 Press the
▲ or ▼ button to select the
Sort and press the œ or √ button.
Result: The Sort menu is displayed with the From selected.
4 Press the œ or √ button until the channel number that you wish to change is displayed.
Result: The selected channel’s picture is displayed.
5 Press the
▲ or ▼ button to select the
To .
6
Press the œ or √ button until the new number by which you wish to identify the channel is displayed.
Result: The selected channel is exchanged with the one previously stored to the chosen number.
Example: If you select P 1 for the From and P 3 for the To :
◆ Channel 1 becomes channel 3.
◆ Channel 3 becomes channel 1.
7 To...
Press the...
Confirm the exchange of channel numbers
◆ ▲ or ▼ button to select the
◆ œ or √ button.
Store .
Result: OK is displayed.
➣
You can exchange other channel numbers by selecting
From and returning to step 4 .
8 When you have finished sorting channels, press the EXIT ( ) button or, press the MENU ( ) button repeatedly to return to normal viewing
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Channel
√
√
√
√
√
Select Enter Exit
Sort
From
To
Store
Channel
: P 1
: P--
: ?
Select Adjust Exit
Sort
From
To
Store
Channel
: P 1
: P 3
: ?
Select Adjust Exit
Sort
From
To
Store
Channel
: P 3
: P 1
: OK
Select Adjust Exit
ENG
19
ENG
Selecting a Channel Numbered Ten or Over
When using the numeric buttons to select a channel stored at programme position ten or higher, follow the instructions below.
1 Press the -/-- button.
Result: The “--” symbol is displayed.
2 Enter the two-digit channel number.
Example: To select channel 42, press 4, followed by 2.
Changing the Picture Standard
Mode
Adjust
Digital NR
Tilt
Picture
Custom
√
: Off
: 0
√
Select Adjust Exit
You can select the type of picture which best corresponds to your viewing requirements. The following picture effects are available in the order given:
◆ Custom, Standard, Sports, Natural, Mild.
1 Press the MENU button.
Result: The Picture menu is displayed.
2 Press the œ or √ button.
Result: The Mode menu is selected.
3
Select to satisfy your preference by pressing the œ or √ button.
4 When you have been finished, press the EXIT ( ) button or, press the MENU ( ) button repeatedly to return to normal viewing.
➣
You can select the required picture effect by simply pressing the “P,MODE” (Picture Mode) button on the remote control.
20
Adjusting the Picture Settings
Your television has several settings which allow you to control picture quality:
◆ Color Tone, Contrast, Brightness, Sharpness, Color,
Tint (NTSC only)
1 Press the MENU button.
Result: The Picture menu is displayed.
2 Press the œ or √ button.
3 Press the
▲ or ▼ button to select the
Adjust , and then press the œ or √ button.
Result: When select the Mode to Custom , the Adjust menu is displayed.
4 To adjust the...
◆ Color Tone
Press the...
◆ œ or √ button.
Result: You select the required option
( Normal , Warm1 , Warm2 ,
Cool1 , Cool2 ).
◆ Contrast
◆ Brightness
◆ Sharpness
◆ Color
◆ Tint (NTSC only)
◆ œ or √ button.
Result: The horizontal bar is displayed.
➣
The Sharpness and Tint are not available in DVD mode.
5 When you are satisfied with the settings, press the EXIT ( ) button or, press the MENU ( ) button repeatedly to return to normal viewing.
➣
The television has an “automatic degaussing” system that is activated if magnetic interference is present. To degauss the television screen, switch power off by pressing the “ ”
(ON/OFF) button on the front panel (refer to “Automatic
Degaussing to Remove Color Patches” on page 37).
➣
If you make any changes to the Adjust settings, the picture standard is automatically switched to Custom.
Mode
Adjust
Digital NR
Tilt
Picture
Custom
√
: Off
: 0
√
Select Enter Exit
Picture
Adjust
Color Tone: Normal
Contrast
Brightness
100
50
Sharpness
Color
50
50
Select Adjust Exit
Picture
Adjust
Color Tone: Normal
Contrast
Brightness
100
50
Sharpness
Color
50
50
Select Adjust Exit
Contrast 100
ENG
21
ENG
Setting the Digital Noise Reduction
Mode
Adjust
Digital NR
Tilt
Picture
Custom
√
: On
: 0
√
Select Adjust Exit
If the signal received by your television is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.
1
Press the MENU button.
Result: The Picture menu is displayed.
2 Press the œ or √ button.
3 Press the
▲ or ▼ button to select the
Digital NR .
4
Select the required option ( On / Off ) by pressing the œ or √ button.
➣
Not available in DVD mode.
Setting the Blue Screen
Function
Language : English
Time
√
Plug & Play
√
Blue Screen
Child Lock
√
Demonstration
√
: On
Select Adjust Exit
If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
“Blue screen” mode to “Off”.
1
Press the MENU button.
2 Press the
▲ or ▼ button to select the
Function and press the œ or
√ button.
3 Press the
▲ or ▼ button to select the
Blue Screen .
4 Select the required option ( On / Off ) by pressing the œ or √ button.
22
Selecting the Picture Format
You can select the picture format which best corresponds to your viewing requirements by simply pressing the “P.SIZE ( )” (Picture size) button on the remote control.
Depending on the model, the following picture formats are available in the order given:
◆ Normal
◆ Zoom
◆ 16:9
Using the Tilt Control Feature
(depending on the model)
If you find that the picture received is slightly tilted to one side, you can adjust the tilt setting.
1 Press the MENU button.
Result: The Picture menu is displayed.
2 Press the œ or √ button.
3 Press the
▲ or ▼ button to select the
Tilt .
4 To adjust the Tilt (±7) by pressing the + or – button.
5 When you are satisfied with the settings, press the EXIT ( ) button, or press the MENU ( ) button repeatedly to return to normal viewing.
Mode
Adjust
Digital NR
Tilt
Picture
Custom
√
: Off
: 0
√
Select Adjust Exit
23
ENG
ENG
Changing the Sound Standard
Sound
Mode
Adjust
Auto Volume
Custom
√
: Off
Melody
Pseudo Stereo
: On
: Off
Turbo Sound : Off
Virtual Surround : Off
√
Select Adjust Exit
You can select the type of special sound effect to be used when watching a given broadcast. The following sound effects are available in the order given:
◆ Custom, Standard, Music, Movie, Speech.
1
Press the MENU button.
2
Press the
▲ or ▼ button to select the
Sound and press the œ or √ button.
Result: The Mode menu is selected.
3 Select to satisfy your preference by pressing the œ or √ button.
4 When you have been finished, press the EXIT ( ) button or, press the MENU ( ) button repeatedly to return to normal viewing.
➣
You can select the required sound effect by simply pressing the “S.MODE” (Sound Mode) button on the remote control.
24
Adjusting the Sound Settings
(depending on the model)
The sound settings can be adjusted to suit your personal preferences.
1
Press the MENU button.
2 Press the
▲ or ▼ button to select the
Sound and press the œ or √ button.
3 Press the ▲ or ▼ button to select the
Adjust (or Equalizer ).
➣
When select the Mode to Custom , the Adjust (or
Equalizer ) menu is displayed.
4 Press the œ or √ button.
Result: The “Adjust” (or Equalizer ) menu is displayed.
5 Select the required option and adjust to satisfy your preference.
6
When you are satisfied with the settings, press the EXIT ( ) button or, press the MENU ( ) button repeatedly to return to normal viewing.
➢
You can display the sound adjust menu directly by pressing the “S.MENU” (Sound Menu) button on the remote control.
Sound
Mode
Adjust
Auto Volume
Custom
√
: Off
Melody
Pseudo Stereo
: On
: Off
Turbo Sound : Off
Virtual Surround : Off
√
Select Enter Exit
Sound
Adjust
Bass
Treble
50
50
Balance L 50 R 50
Select Adjust Exit
Balance L 49 R 51
Sound
Mode
Equalizer
Auto Volume
Custom
√
: Off
Melody
Pseudo Stereo
: On
: Off
Turbo Sound : Off
Virtual Surround : Off
√
Select Enter Exit
R Equalizer
ENG
L 100 300 1K 3K 10K
Adjust Move Exit
25
ENG
Sound
Mode
Adjust
Auto Volume
Custom
√
: On
Melody
Pseudo Stereo
: On
: Off
Turbo Sound : Off
Virtual Surround : Off
√
Select Adjust Exit
Sound
Mode
Adjust
Auto Volume
Melody
Custom
√
: Off
: On
Pseudo Stereo
Turbo Sound
: Off
: Off
Virtual Surround : Off
√
Select Adjust Exit
Sound
Mode
Adjust
Auto Volume
Melody
Custom
√
: Off
: Off
Pseudo Stereo
Turbo Sound
: On
: Off
Virtual Surround : Off
√
Select Adjust Exit
Sound
Mode
Adjust
Auto Volume
Melody
Custom
√
: Off
: Off
Pseudo Stereo
Turbo Sound
: Off
: On
Virtual Surround : Off
√
Select Adjust Exit
Sound
Mode
Adjust
Auto Volume
Custom
√
: Off
Melody
Pseudo Stereo
: Off
: Off
Turbo Sound : Off
Virtual Surround : On
√
Select Adjust Exit
Extra Sound Settings
The following sound settings can be adjusted to suit your personal preferences.
◆ Auto Volume
Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. “Auto Volume” lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
◆ Melody
You can hear clear melody sound when the TV is powered ON or OFF.
◆ Pseudo Stereo / Virtual Surround
Pseudo Stereo converts a monaural sound signal into two identical left and right channels.
Once the Pseudo Stereo or Virtual Surround is set to
On or Off, the setting applies to the sound effects such as
Standard, Music, Movie and Speech.
◆ Turbo Sound
On - Plus - Off
You can enjoy more magnificent and dynamic sound when watching music, movie or other channel. Turbo
Sound suitably emphasizes both higher and lower bands of sound (and includes other effects).
1
Press the MENU button.
2 Press the ▲ or ▼ button to select the
Sound and press the œ or √ button.
3 To...
Change an option
Select the required option (On/Off)
Press the...
▲ or ▼ button.
œ or √ button.
4 When you are satisfied with the settings, press the EXIT ( ) button or, press the MENU ( ) button repeatedly to return to normal viewing.
➢
You can select the turbo sound by simply pressing the
“TURBO” button on the remote control.
➢
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol ( ) are trademarks of Dolby
Laboratories.
26
Selecting the Sound Mode
(depending on the model)
The “DUAL I-II” button displays/controls the processing and output of the audio signal. When power is switched ON, the mode is automatically preset to either “Dual-I” or “Stereo”, depending on the current transmission.
On-screen indication
NICAM
Stereo
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM Stereo
NICAM Dual-I/II
Mono (Normal use)
Mono
Nicam
↔
Mono
(Normal)
Stereo
Nicam
↔
Mono
(Normal)
Dual-I
→
Dual-II
→
Mono
Nicam Nicam (Normal)
Regular broadcast
(Standard audio)
Mono (Normal use)
A2
Stereo
Bilingual or Dual-I/II
Stereo
Dual-I
↔
Dual-II
Stereo
↔
Mono
(Forced Mono)
➣
◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the “Mono” position using the
DUAL I-II button.
◆ If the stereo signal is weak (or if intermittent Stereo-Mono) and automatic switching occurs, then switch to the
“Mono” mode.
◆ When receiving mono sound in the AV mode, connect to the “L” input jack on the panels. If the mono sound comes out only from the left speaker, then press the
DUAL I-II button.
ENG
27
ENG
Adjusting the Volume
You can adjust the volume by pressing the + or button on the remote control.
◆ Press the button to increase the volume (cursor moves to the right)
◆ Press the button to decrease the volume (cursor moves to the left)
➣
The volume setting is retained:
◆ When you switch the television to standby mode
◆ When you switch the television off using the “ ”
(ON/OFF) button on the front panel
◆ If there is a power failure.
Switching the Sound Off Temporarily
You can switch the sound off temporarily, for example you may wish to answer the telephone.
1 Press the MUTE ( ) button.
Result: The sound is switched off and “ ” is displayed.
2 When you wish to turn the sound back on at the same volume as before, press the MUTE ( ) button again (or either of the volume buttons).
28
Setting the Sleep Timer
(depending on the model)
You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode by pressing the “SLEEP ( )” button.
1
Press the SLEEP ( ) button on the remote control.
Result:
If the sleep timer is...
Already set
The screen displays...
Time remaining before the television will be placed in standby mode.
Not yet set Word Off .
2 Press the SLEEP ( ) button repeatedly and cycle through the preset time intervals (30, 60, 90, 120, 150, 180).
Result: The television automatically switches to standby mode when the timer reaches 0.
3
To cancel the sleep timer function, press the SLEEP ( ) button repeatedly and select Off .
ENG
29
ENG
Setting and Displaying the Current Time
(depending on the model)
Function
Language : English
Time
√
Plug & Play
√
Blue Screen
Child Lock
√
Demonstration
√
: Off
Select Enter Exit
Time
Clock
Timer
Function
11 : 00 AM
Off
Select Move Exit
You can set the television’s clock so that the current time is displayed when you press the “INFO ( )” button.
You must also set the time if you wish to use the automatic On/Off timers.
➣
The clock setting will be re-activated when pressing the
“ ” (ON/OFF) button on the front panel.
1 Press the MENU button.
2 Press the
▲ or ▼ button to select the
Function and press the œ or
√ button.
3 Press the
▲ or ▼ button to select the
Time , and press the œ or √ button.
Result: The Time menu is displayed with the Clock selected.
4 To...
Press the...
Move to the hour or minute
Set the hour or minute
œ or √ button.
▲ or ▼ button.
5 When you have finished, press the EXIT ( ) button or, press the
MENU ( ) button repeatedly to return to normal viewing.
6
To display the...
Press the “INFO ( )” button...
Channel information
Current time
Once.
Twice.
7 To remove the display, press the INFO ( ) button again.
30
Switching the Television On and Off Automatically
(depending on the model)
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your choice at the time you select
◆ Switch off automatically at the time you select
➣
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on the previous page). If you have not yet set the clock, the message Set the clock first is displayed.
1
Press the MENU button.
2
Press the
▲ or ▼ button to select the
Function and press the œ or
√ button.
3 Press the ▲ or ▼ button to select the
Time , and press the œ or √ button.
Result: The Time menu is displayed.
4 Press the
▲ or ▼ button to select the
Timer .
5 Press the œ or √ button to set the mode to On .
Result: The On Time and Off Time options are displayed.
6 Press the
▲ or ▼ button to select the
On Time .
7 Set the time at which you wish the television to be switched On.
To...
Move to the hour or minute
Adjust the hour or minute
Press the...
œ or √ button.
▲ or ▼ button.
8
In the same way, set the time at which you wish the television to be switched Off.
9 When you have finished setting the On/Off time, press the EXIT
( ) button or, press the MENU ( ) button repeatedly to return to normal viewing.
➣
Absent Power Off
If no function buttons (including remote control buttons or front panel buttons) are operated for three hours after the TV is turned on by On time, the TV will be automatically turned off.
Time
Clock
Timer
Function
11 : 35 AM
Off
Select Adjust Exit
Function
Time
Clock
Timer
On time
Off time
11 : 35 AM
On
-- : -- AM
-- : -- AM
Select Adjust Exit
Function
Time
Clock
Timer
On time
Off time
11 : 35 AM
On
07 : 00 AM
-- : -- AM
Select Adjust Exit
Function
Time
Clock
Timer
On time
Off time
11 : 35 AM
On
07 : 00 AM
11 : 00 PM
Select Adjust Exit
ENG
31
ENG
Activating the Child Lock
Function
Language : English
Time
√
Plug & Play
√
Blue Screen
Child Lock
Demonstration
√
: Off
√
Select Enter Exit
Child Lock
Child Lock
Function
: Off
Select Adjust Exit
Child Lock
Child Lock
Prog.No.
Lock
Function
: On
:
:
1
?
Select Adjust Exit
Child Lock
Child Lock
Prog.No.
Lock
Function
: On
: 1
: Locked
Select Adjust Exit
P 1
Child Lock : Locked
You can restrict viewing by locking the channels of your choice.
Example: You can prevent your children from watching unsuitable programmes.
1 Press the MENU button.
2 Press the
▲ or ▼ button to select the
Function and press the œ or
√ button.
3
Press the
▲ or ▼ button to select the
Child Lock and press the œ or √ button.
Result: The Child Lock menu is displayed.
4 Set to On by pressing the œ or √ button.
➣
If you want to unlock a channel, set to “ Off ”.
5 Press the ▲ or ▼ button to select the
Prog.No.
. Select the number of the channel to be locked by pressing the œ or √ button.
6 Press the ▲ or ▼ button to select the
Lock and press the œ or √ button.
Result: Locked is displayed.
7 When you have finished, press the EXIT ( ) button or, press the
MENU ( ) button repeatedly to return to normal viewing.
➣
If any channel is locked, you can not enter the “Channel” menu by using the control buttons on the television, and the message “Not available” is displayed. You can access by using the remote control only.
32
Enjoying Games
(depending on the model)
You can enjoy the game (Chicken Farm), programmed in this TV.
1
Press the GAME button to enter the Game mode.
Result: The READY window will be displayed.
2
Press the œ or √ button to run the game.
3 Move the farmer to catch eggs by using the œ or √ button. Every time the scores go up, the speed of game becomes faster bit by bit.
4 Every time you catch fifty eggs (i.e., 50, 100, 150 ...), if any broken egg exists, one egg can be restored. When five eggs are lost, the game will be over and simultaneously the final score window will be displayed.
5 If you want to stop during the game, press the MENU button. Then, the final score window will be displayed.
6 If you want to re-start the game, press the MENU, œ or √ button.
Then, the final score window will be switched to the READY window.
7 To exit the Game mode, press the GAME button.
READY
SCORE 0
ENG
SCORE 16
33
ENG
Teletext Decoder
(depending on the model)
Most television channels carry “teletext,” pages of written information that provide information such as:
◆ Television programme times
◆ News bulletins
◆ Weather forecasts
◆ Sports results
The teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
Contents
Selected page number.
Broadcasting station identity.
Current page number or search status
Date and time.
Text.
Status information.
Displaying Teletext Information
(depending on the model)
You can display teletext information at any time, but signal reception must be good. Otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
To activate the teletext mode and display the contents page:
1
Using the or button, select the channel providing the teletext service.
2
Press the TTX/MIX ( ) button to activate the teletext mode.
Result: The contents page (page 100) is displayed. It can be redisplayed at any time by pressing the (index) button.
3 To display the actual broadcast simultaneously with the teletext page, press the TTX/MIX ( ) button.
4 To return to normal viewing press the TV ( ) button.
34
Selecting a Specific Teletext Page
(depending on the model)
Press the number buttons on the remote control to enter the page number directly:
1 Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons.
Result: The current page counter is incremented and the page is then displayed.
2 If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the (hold). Press the (hold) again to resume.
3 Using the various display options:
To display...
◆ Both teletext information and the normal broadcast
◆ Hidden text
(answers to quiz games, for example)
◆ The normal screen
◆ A secondary page, by entering its 4-digit number
◆ The next page
◆ The previous page
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
◆ Normal screen
Press the...
TTX/MIX ( )
(reveal)
(reveal) again
(sub-page)
(page up)
(page down)
(size)
◆ Once
◆ Twice
◆ Three times
ENG
35
ENG
Using FLOF to Select a Teletext Page
(depending on the model)
The various topics included in the teletext pages are color-coded, and can be selected by pressing the colored buttons on the remote control.
1
Display the teletext contents page by pressing the TTX/MIX ( ) button.
2 Press the colored button corresponding to the topic that you wish to select (The available topics are listed on the status information line).
Result: The page is displayed with additional color-coded information that can be selected in the same way.
3
To display the: Press the:
Previous page
Next page
Red button.
Green button.
4 When you have finished, press the TV ( ) button to return to the normal broadcast.
36
Storing Teletext Pages
(depending on the model)
Up to four teletext pages can be stored.
1 Select the LIST mode.
Result: Four 3-digit numbers are displayed in different colors at the bottom of the screen.
2 Press the colored button corresponding to the page that will be replaced.
3
Enter the new page number using the numeric buttons.
4 Repeat steps 2 and 3 for each page to be stored, using a different colored button each time.
5 Press the (store) button until the corresponding blocks are displayed in white.
➣
The button is used to switch between:
◆ LIST mode
◆ FLOF mode
Automatic Degaussing to Remove Color Patches
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the television manually.
If you move the television to a different position and color patches appear on the screen, you must:
◆ Switch the television off by pressing the “ ” (ON/OFF) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off (stand-by) for about 30 minutes so that the automatic degauss function can be activated, and then press the POWER ( ) button on the remote control.
☛
If your television will be left unattended, press the “ ” (ON/OFF) button to turn your television off.
ENG
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer.
No sound or picture
Normal picture but no sound
No picture or black and white picture
Sound and picture interference
Blurred or snowy picture, distorted sound
Remote control malfunctions
◆ Check that the mains lead has been connected to a wall socket.
◆ Check that you have pressed the “
” (ON/OFF) button.
◆ Check the picture contrast and brightness settings.
◆ Check the volume.
◆ Check the volume.
◆ Check whether the MUTE ( ) button has been pressed on the remote control.
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
◆ Try to identify the electrical appliance that is affecting the television and move it further away.
◆ Plug your television into a different mains socket.
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
37
ENG
Memo
38
Memo
ENG
39
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present.
AA68-03047A-00
advertisement