20050125

7" Portable DVD Player

PDM-0722

Operation Manual

Warning: This indicates that "There is a risk of injury or death".

Caution: This indicates that "There is a risk d injury or physical damage".

Before operation

Warning

Read and keep the operation

manual. Before using the the product, please carefully read this manual and follow all safety and operation instructions Keep this manual for future reference.

Power supply: The power supply must correspond to the standard indicated on the product.

If you are not sure of the power supply, please refer to the supplier or the local power company.

Ventilation:

Do not place this unit on a bed, sofa, cloth or similar. Make sure there is adequate ventilation around the unit before operation.

Prevent objects and liquid from

contacting the player

_ _!_,,

,_

In order to avoid the risk of electric shock and fire caused _'_: ,_' by short circuits, do not insert objects into the player and do not ky,?j[,:;_._,,_,:, spill liquids on the player. Do not place objects such as vases filled with liquids on the apparatus.

_,._"

.....

.,,_.I_

" _:f?q

Do not use the product where it will get wet.

This could cause the product to ignite, or cause electrical shock or other malfunction.

Do not disassemble, repair or modify the product.

Do not cut the power cord to connect it to the power supply for another device. This could cause fire, electrical shock or other malfunction.

Always use only the accessories provided with

the product.

Only use attachment/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacture, or sold with the apparatus.

Do not install the product in a position where it will interfere with the operation of an automotive air bag,

The air bag may fail to operate properly or the product could become dislodged by airbag operation, causing an accident and/or injury.

Do not expose the product to excessive heat.

This could cause the product to start smoking or ignite, or cause electrical shock or other malfunction.

Unplug all the equipment before connecting.

Always ensure that the DVD player and any other electrical equipment connected to the DVD player is switched off and unplugged from the power supply before the player is connected.

Do not, under any circumstances, install the product

in a place in a vehicle where the driver's ability to drive the car or the driver's field of vision will be impaired.

Install the product in a place where it doesn't interfere with the driver's field of vision either in front or behind or in a place where it interferes with the driver's ability to drive the car. This may lead to traffic accidents and/or injury.

Follow the instructions to connect the product to other electrical

equipments.

To prevent damage to the unit, be sure to follow the connection diagram.

Do not connect power to the unit until all other connections are completed.

Danger of explosion if battery is incorrectly replaced.

Replace the rechargeabte lithium battery only with the same or equivalent type.

Caution

Install the product

securely

so that it will not shift out of place or fall, Loose screws or insecure installation may cause the product to shift out of position or fall while a vehicle is moving, resulting in an accident and/or injury.

Region code information: DVD players and discs are coded by region. If the region number described on the DVD disc does not correspond to the region number of this product, this product cannot play the disc. The region code of this unit is 1.

This product

has been listed as class 1 laser product, The mark is on the rear

panel.

The apparatus shall be connected to an AC power outlet with a protective grounded connection.

Visible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam. Do not open the top cover while the unit is operating.

There are no user serviceable parts inside the unit. Leave all servicing to qualified service

)ersonnel.

Beware of unit falling

or tipping over when moving,

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

Before operation

Warning

Unplug the apparatus during lightning storms.

Never operate the product during lightning storms as this could cause the product to malfunction.

Do not operate the product if there is visible damage to the product,

If damage occurs, immediately stop using the product and contact the store from which you purchased your product.

Continuing to use the product in this condition could cause accidents, fire or electrical shock.

The driver of a vehicle must not operate this product or watch the monitor.

It may distract the driver and cause an accident.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been damaged in any way, such as: damage to the power supply cord or plug, liquid spilled on the player, objects have fallen into the player, exposure to rain or moisture, the unit does not operate normally or has been dropped.

Caution

Notes on discs: Do not play discs that are damaged or warped, including discs with cracks, scratches or parts missinq; discs with burrs; poor quality discs.

Route all cords so that they do not interfere

with

driving or with entering or

exiting the car. Run the cords so that they do not wrap around the steering wheel, brake pedal, etc. or around your feet. Secure all the cords toqether.

Use the product at the proper volume setting.

Driving while you are unable to hear sounds around you or from outside the car can cause accidents.

Do not touch the color TFT LCD screen.

Do not place any heavy objects on the product,

Never put any heavy objects on the product. Doing so may cause damage to product.

Do not damage the cords.

Broken wires and short circuits can cause electrical shock or fire. Run the cords so that they do not get tangled in moving parts. Do net damage, tighten up, twist, or work on the cords. Do not place the cords near heat sources or put heavy objects on the cords.

Do not play discs in the wrong format.

For instance, if you add the ".cda" extension to a file that is not formatted as a CD file, a loud noise may be heard through the speakers, possibly damaging them and hurting your eardrums.

Do not swing from the product or pull it,

This may cause an accident, injury and/or malfunction.

Be particularly careful that children follow this rule.

IMPORTANT FOR LASER PRODUCTS

1.

CLASS 1 LASER PRODUCT

2.

DANGER:

Visible laser radiation when open and interlock failed or defeated Avoid direct exposure to beam.

3.

CAUTION: Do not open the top cover There are no user service-able parts inside the unit Leave all servicing to qualified service personnel.

This unit complies with FDA regulation for radiation control of laser products.

Preservation and Cleaninq warning

Do not use any volatile agents such as gasoline or

paint thinners to clean the product. Never use any volatile materials to clean the product, because they may damage the surface of the player. Use a soft, dry cloth for cleaning.

Store in a proper place

Store the product in clean, dry place, avoid direct sunlight and moisture.

Caution

Unplug the product when not used for a long period of time.

Copyright Protection

This product incorporates copyright protection technology that is protected by U.S.

patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.

Reverse engineering or disassembly is prohibited.

Hi,qh-qualitv audio and video

_!

xcellent

great sound•

sound:

Dolby Digital delivers

Advanced Playin,q Functions

In: External Audio, Video input can be

AV Out: Analog Audio output and video

Particular Performance:

Multi-speed, fast forward,

!orward, fast backward

SlOW backwa!d

and slow

......................................

Search by

Time:

Search track of a disk by selected for a certain time

Special ratio

Functions: changing, multi-language

Supports

zooming

caption, screen

in

multi-angle or aspect out, viewing•

Other Special Functions

Revolving LCD Screen: Adjust the screen by revolving it horizontally about its axis, or

IY_Power Adapter

Switch:

adapts to voltage requirements

Automatically

in U.S

and

Accessories List

ITEM NAME

Remote Control (with battery)

Operation Manual

Power Supply Cord with AC Adapter

Audio/Video Cable

QTY

Rechargeable Battery Pack

DC Adapter (Car Adapter)

NOTE

Accessories and their parts numbers are subject to change without prior notice.

(Safety Instructions

( Accessories

( View of S,de

( View of Unit Bottom

( Revolving LCD Screen

I emote Control

) ..................................................

...................................................

) . .................................................

11 ..................................................

..................................................

..................................................

2

8

12

13

14

15

( Notes on Discs _ ..................................................

24

DVD Playback

CD Playback

..................................................

..................................................

Picture CD Playback .........................................

SystemSetup ...................................................................................................................................

35

( Definitions

( Troubleshooting

):

),

..................................................

. .................................................

39

40

26

30

32

Front View

L

1.

2,

3.

LCD Screen

Speakers

Mode button

Press to change the menu of brightness, contrast and color.

Keep pressing to change the aspect ratio.

4+ button 4.

press to adjust the value of brightness, contrast and color.

5.

ZOOM button

Press to realize various zoom effects.

6.

Setup button

7,

Press to enter the player's system setup.

MENU button

8.

Press to display or cancel the menu. TITLE button

Press to display the title menu if it exists in the disc.

A/_

button 9.

Press to select different options, or to search forward fast.

10.

I_/_N button

Press to select different options, or to skip to the next list, track or chapter.

]0

Press to access playback, or confirm your selection.

12.

</1_ button

Press to select different options, or to return to the previous list or the previous track or chapter.

If it is a DVD disc, it needs to press this button twice to return to the previous track.

13.

V/44 button

Press to select different options, or to search backward fast.

14.

A-B Repeat button

Press to play a certain selected segment repeatedly.

15.

SLOW button

Press to activate the slow playback function.

16.

•

(Stop) button

Press to stop playback.

Then press PLAY button to resume playback from the stopped spot. Press this button twice to stop playback completely.

17.

_II(PLAY/PAUSE)

button

Press once to pause the playback, and press it again to resume the playback.

18.

Power Indicator

Lights green when the player is on work; turn red when the player is in standby mode.

19.

Charge indicator

Lights red when the battery is chargedl turn green when the charge is over.

20, Remote Control Sensor

21, Unit latch hook

22, OPEN Switch

Push to open the disc tray cover.

Ri,qht Side View

1.

2.

3.

4.

5.

6.

VOLUME Control

For adjusting the sound level of speakers or headphones.

Headphone Jack

When headphones are plugged into the unit, the speakers automatically turn off.

AUDIO input/output Jack

For connecting to an external amplifier or audio source

VIDEO input/output Jack

For connecting to an external monitor or video source

DVD/AV IN Switch

Switch to AV IN to input the external AV source; switch to DVD to playback the disc

DC 9.5V IN Jack

For connecting to power supply, including Car Adapter. (See page15)

Left Side View

1.

POWER ON/OFF Switch

Switch the power on or off.

]2

View of the bottom

O

1.

2.

Rechargeable Battery Contacts

For connecting the rechargeable battery pack.

Docking Jack

This portable DVD player is designed with a Docking Jack on the bottom.

The

Docking Jack is designed for connecting to an optional external Docking Station for

expanded functions.

The Docking Station features an electrical connection interface that enables the portable DVD to effectively serve as a desktop DVD. It is integrated with connectors for peripheral devices to eliminate complicated connections and save valuable space around the unit. With a Docking Station, you can enjoy the

expansion

possibilities of desktep DVD with the portability of a portable DVD.

]3

Revolvinq Steps

The revolving LCD screen is one of the outstanding features about this product. We'd like to suggest you to take the following steps for proper operation.

A

1 Open the screen cover to position (A) as shown in the left figure at which the screen is vertical to the operation panel•

!i:!!i

2 Revolving the screen horizontally around it's axis in the clockwise only. The maximum revolving degree is 180

(position C). If you want to return to initial position (A), please revolve screen counter clockwise.

3 You can rotate the screens vertically from position C to operation panel as indicated in left fig.

4 The final rotating position (position D) at which the screen facing upward and back to operation panel.

]4

1.

ilizi ililil

.................................................................... x#'

PWR button

Press to access standby mode or playback mode.

INFO button 2.

Press to display the detailed information of the disc during playing. Press this button again to exit from the information display.

3.

TITLE button

4.

Press to display title menu if it exists in the disc.

Direction buttons

5.

Press to select different options.

ENTER button

Press to access playback, or confirm your selection

6.

SETUP button

Press to enter the player's system setup.

7.

0-9 Number

buttons

8.

Press to select an option in the menu.

_ PREV button

9.

Press to return to the previous list or the previous track or chapter. If it is a DVD disc, it needs to press this button twice to return to the previous track.

_ NEXT button

Press to skip to the next list, track or chapter.

]5

10.

SUBT button

Press to select different subtitle languages if there are multiple subtitle languages existing in the disc.

11.

ANGLE button

Press to access various camera angles playback if the DVD disc contains multiple camera angles.

12.

A-B Repeat button

Press to play a certain selected segment repeatedly.

13.

ZOOM button

Press to realize various zoom effects.

14.

REP button

Press to repeat a chapter, a title, a track or the whole disc.

15.

MENU button

Press to display or cancel the menu.

16.

PAUSE button

Press to pause the playback.

17.

STOP button

Press to stop the playback. Then press PLAY button to resume playback from the stopped spot. Press this button twice to stop playback completely.

18.

PLAY button

Press to begin to play.

19.

GOTO button

Press to select the desired disc starting time, track or title.

20.

+10 button

Press this button and the additional number buttons to select item numbers which are greater than 9.

21.

_ FWD SCAN button

Press to search forward fast.

22.

REV SCAN button

Press to search backward fast.

23.

SLOW button

Press to activate slow playback function.

24,

AUDIO button

Press to select different languages when a DVD disc which contains multiple audio languages is played.

Press to select different audio track when a CD disc is played.

]d

Installation Steps

Follow the steps below to install the battery.

Step1 : Pull the battery holder out from the remote control in the direction of the arrow.

Step 2: Load a new battery properly with the (+) side up.

Step3: Insert the battery holder back into the remote control.

Battery Property

Battery Type: CR2025 3V

Battery Life: Approximately ! year under normal use (at room temperature).

Caution

1.

2.

3.

4.

4.

Improper use of the battery may cause overheating, explosion or ignition, which can result in an injury or fire. Battery leakage may damage the remote control.

Do not expose the remote control unit to direct sunlight.

Do not recharge, disassemble, deform or heat the battery.

Do not put the battery in fire or water.

Immediately replace the exhausted battery.

]7

•

•

Always ensure

that the DVD player, TV and any other electrical equipment

to be connected with are switched off and unplugged from the power supply.

Ensure that you observe the color coding when connecting audio and video cables.

Connectinq

to TV

Audio/Video connections

Follow the drawings below to connect the DVD player to a TV's Audio/Video inputs with

AudiotVideo cables.

Connectinq

to Amplifier

Refer to your Audio equipment's manual before connection.

Follow the drawings below to connect the DVD player to an AV amplifier.

]8

Connectinq to External AV Source

The player supports an AV signal input function.

Use the audio/video cable to connect the unit to an external AV signal source such as a DVD, VCR etc. After connecting, switch the DVD/AV IN toAV IN.

NOTE: Noise may occur in speakers when there is an external audio signal input while playing a DVD disc. Unplug the audio cord to clear the noise.

#2d S G_,_ALSOUR(-_E

Connectin,q to Headphone

Connect headphones to the headphone jack on the right side of the unit.

When headphone is connected, the speakers will automatically turn off.

]9

Using the AC Adapter

The player is supplied with an AC adapter for powering the unit and charging the battery.

Connect AC adapter to the right side of the DVD player in the jack marked

DC 9.5V IN, as shown on the right.

Plug the two-prong end of the power cord into a grounded electrical outlet.

The power indicator lights red.

Note: Turn player's power off before

unplugging,

Note: In the case of using the adapter, the LCD screen will be lighter than with the rechargeable battery.

Using the Car Adapter

The player is supplied with a Car Adapter for powering the unit and charging the battery while in a vehicle.

Connect the Car Adapter Power Ptug to the unit's power jack and plug the other end to the vehicle's 12V accessory

/

cigarette socket, as shown on the right figure.

_h er

Attention

Do not operate the unit or view video software while driving a vehicle.

Place the unit in a proper position for viewing.

Detach the battery pack when using the AC or car adapter as the power source.

Disconnect the player from the Car Adapter when starting the vehicle.

2O

About

Recharqeable Battery,

Pack

Your portable DVD player comes with a lithium ion rechargeable battery that attaches to the rear of the DVD player. Charge the battery fully before initial use. Charging time is normally about 5 hours. A fully charged battery delivers about 3 hours of use, but playing time varies from disc to disc.

If the battery will not be used for a long period of time, fully charge the battery prior to storage.

Working conditions and precautions

for the rechargeable

battery

New batteries should be fully charged before initial use.

Battery should only be used and charged when temperatures are between 32 -

100F.

Never put the battery in fire or water.

Do not expose the battery to high temperatures or store in hot, sunny places.

Maintain well-ventilated conditions around the product to avoid overheating.

Don_t put the product on a bed, sofa or anything that may block ventilation to the product.

Do not short the battery terminals.

Do not open the battery.

Detach the battery after charging is complete.

When charging the battery pack, the charge light will turn red, when the charging is complete, the light will turn green.

Detach the battery when it is not in use.

When the battery is weak, "Low Power" will appear on the LCD screen and about one minute later, the player will power OFF automatically.

Warning:

Do not touch any metal objects to the battery connectors, as it will put the battery in standby mode. To exit the standby mode, connect the battery and DVD player to AC or

DC power

2]

Attachinq

the Battery Pack

Refer to the following steps for attaching the Battery Pack:

1.

Make sure the player is off and the AC or car adapter is disconnected.

2.

Place the DVD player on a soft and smooth facing up.

surface with the bottom of the unit

3.

With one hand on the DVD player to prevent it from moving, take the battery and

4.

align the plastic tabs on the battery pack with holes on the player, and push the battery pack into the DVD player.

The battery pack will click into place.

Charging the Battery

Pack

The battery pack must be attached to the DVD player to charge it using the supplied AC or car power adapter.

1.

Attach the battery pack to the DVD player, as shown above.

2.

3.

Plug the supplied AC Power Adapter into the player's power jack marked "DC

9.5V IN", located on right side of the DVD Player.

Plug the other end of the AC Power Adapter Cord into a household AC Outlet as shown below.

22

Detachinq

the Battery

Pack

If the DVD Player is not going to be used for long periods of time, the battery pack should first be fully charged and then detached. When the DVD Player is turned OFF, the DVD

Player is still consuming some power in STANDBY mode. This will eventually discharge the battery.

Make sure the power is turned OFF and the AC or car adapter is disconnected before detaching the Battery Pack.

To detach the Battery Pack:

1.

Push the battery pack latch toward the rear of the player and slide the rechargeabte

2.

battery from the main unit (see drawings below).

Store the rechargeable battery in a safe place.

23

Compatible Disc Formats

DVD

CD

DISC LOGO

v_ D _ O

DIAMETER

12cm

8cm

12cm

8cm

12cm

PLAYBACK

TIME/

PLAYABLE SIDES

133 min (SS-SL)

242 rain (SS-DL)

266 rain (DS-SL)

484 min (DS-DL)

41 rain (SS-SL)

75 min (SS-DL)

82 min (DS-SL)

150 rain (DS-DL)

74 min

20 min

JPEG

Operation methods of some DVD discs are specified by the software manufacturer.

Please follow the instructions for the disc.

Care of Discs

Handling Discs

Cleaning

Do not wipe in a circular direction as shown on the right (concentric scratches on the playing surface can cause noise).

Gently wipe from

_: the center of the disc to the outer edge as the lower figure•

24

THEFOLLOWING

FOR

WARNING: Do not play poor-quality

discs to avoid damaging

the lens.

Pre-operation

1.

2.

3.

Connect the unit to power supply through the provided AC adapter.

Switch "POWER ON/OFF" to "ON" on the left panel to turn on the DVD player• The main unit power indicator lights green and screen displays the @_)da_©_d logo.

Press the OPEN button on the unit to open the disc tray cover, put a disc in the disc tray with printed side facing up. Close the disc cover. (See below.)

4.

5.

6.

The player will search the disc and play it automatically.

Adjust the volume with the VOLUME control on the right panel to the desired level.

To turn the player off, switch the "POWER ON/OFF" on the left panel to "OFF".

Basic Operation

Press the MODE button to enter the brightness, contrast or color adjustment mode. Adjust these levels with + and buttons• Press the MODE button repeatedly to change the aspect ration r B_

: [ !d

25

DVD Playback

Play i

Pause

start playing or ,_ _ A i.

(Direction buttons) or

0-9 buttons to select t° a

'_ to start la in

P y g

Press ENT butt°n

Title and Chip!el

d![ec!!Y

.............................................

playback from the stopped point.

Press STOP button twice repeatedly to stop playback completely.

Then when you press PLAY button, the player wilt play from the beginning.

resume normal playback from the stopped point. Press it twice repeatedly to stop playback completely. Then when you press _1 button, the player will play from the beginning.

Press ZOOM button repeatedly to shift among IX,

2X, 3X, 4X zooming effect and normal playback.

Zoom button _

A-B Button l, t:,}_,

_ _i ,_

_.

Press A-B button once to set the starting point A, press it again to set the end point B. Then the player will play the segment between A and B continuously• the A-B repeat•

Press this button a third time to stop

26

DVD Playback (continued)

TITLE button

:

_

Press TITLE button during play. The title menu will appear on the screen.

Press 4 _. A v (direction buttons) to select the title or disc menu item you wish to play, then press

ENTER button to confirm your selection.

Or press

0-9 buttons to select the item you prefer directly.

MENU button _!J_

Press MENU button during play. The root menu will appear on the screen.

Press _ _. A v (direction buttons) to select the item

_you

,;

the wish to play, then press ENTER button to confirm your selection.

Or press 0-9 buttons to select tem you prefer d rect y

I_&_N buttons

_&_4 buttons

SLOW button i

/

_

Press I{,_ button once to go to the beginning of the current chapter.

Press it twice repeatedly to go to the beginning of the previous chapter.

Press _._.1

to play the next chapter.

Press I._, button to play fast forward.

Press it repeatedly and the fast forward playback will begin at the speed of2X, 4X, 8X, 16X and normal playback in sequence.

Press 44 button to fast reverse.

Press it repeatedly and the fast reverse playback will begin at the speed of 2X, 4X, 8X,

I6X and norrnat playback in sequence.

Press PLAY button on the remote control to return to normal playback.

;,

Press SLOW button repeatedly and slow playback will start at the speed of I/2, 1/4, I/8, 1/16 forward playback in sequence.

Press PLAY button to resume p ayback

2?

DVD Playback (continued)

'

Press INFO button for detailed information abou the disc during disc playback• Press it again to cancel the infornlation.

AUDIO button

SUBT button

_i

.........

DVD discs can contain up to 8 audio bit streams.

For example: English, Spanish, French etc.

To select the audio bit stream you prefer, press

AUDIO button during playback• The DVD player will play the next bit stream every time you press

AUDIO button in succession, if they exist.

When a DVD disc is playing, press SUBT button to select a subtitle language or to turn the subtitle off. A

DVD disc can be recorded with up to 32 subtitles•

Press SUBT button repeatedly, the mode of subtitles will cycle as follows:

SUBTITLE l/N: Subtitte 1 appears on the screen•

SUBTITLE 2IN: Subtitle 2 appears on the screen•

SUBTITLE *IN: Subtitte * appears on the screen

SUBTITLE OFF: No subtitle•

"N" refers to the total number of subtitles that the current disc contains

NOTE: This function is only available for DVD discs recorded with multi-subtitles

28

DVD Playback (continued)

A.GLE i) _ different angles so that the audience can watch from any angle, like the drawings below:

_r_ :i! _)1)_ )_ if there are multiple angles in a scene, you can use the ANGLE button to select the angle you like to view.

Press the ANGLE different angle.

button repeatedly to view from

NOTE: This function is only available for the DVD discs coded with multi-angle material.

:':_#g

Press GOTO button to select desired disc title, chapter or time.

GOTO button

Use the 4 or _. direction button to move the blue bar to TITLE, CHAPTER or TIME.

Use 0-9 number buttons to enter the desired title, chapter or time directly• Press ENTER button to confirm.

Then the player will begin playing from the selected title, chapter or time.

Press it repeatedly to cancel the item.

29

CD Playback

When a CD disc is loaded, the player will play it automatically by the default sequence of the disc. You can use _, _ or number buttons to select a certain track to play.

i,¸¸

_f4 Dur nao ayback press During playback, press

PAUS'Ebutton to pause _ _( button once to pause the p ayback then press !_ : !he PlaYback, then press

PLAY button 'to resume it aga)n [o resume playback, playback.

_¢

/_

Duringplayback, press the STOP button once to stop playback• Then press PLAY button, the player wilt resume playback from the stopped point. Press this button twice to stop playback completely.

/_

During playback, pres

• button once to stop playback• Then press

_: _J button, the player wilt resume playback from the stopped point• Press

• button twice to stop playback completely.

_&4_ buttons

Press _._.button

to play fast forward.

Press it repeatedly and the fast forward playback will

: begin at the speed of 2X, 4X, 8X, t6X and normal playback in sequence.

Press 44 button to fast reverse• Press it repeatedly and the fast reverse playback will begin at the speed of 2X, 4X, 8X,

......

I6X and normal playback in sequence.

Press PLAY button on the remote control to return to normal playback.

A-B button t_

_

Press A-B button once to set the starting point A, press it again to set the end point B. Then the player will play the segment between A and B continuously.

Press this button a third time to stop the A-B repeat.

3O

CD Playback (continued)

_!_

Press I" button to play the previous chapter.

Press _.Ebutton

to play the next chapter.

I_&_buttons 1

GOTO button

Press GOTO button to select desired track, track time

_!,_ :or

_;;_) _i disc time• Use the

:! the blue

4 or _. direction bar to track time, track button to move or disc time• Use 0-9 buttons on the remote control to enter the desired time and press ENTER button to confirm•

Press it reeeatedlv to cancel the item•

Press INFO button repeatedly for detailed information about the disc during playback.

Press it

INFO button i

Note: * refers to the playing track number•

N refers to the total track numbers of the disc.

} @

3]

Picture CD Playback

Pre-operation

/

1. Load a Picture CD in the disc tray• The player will search for the disc automatically.

2.The

screen displays the root folder with several subdirectories/subfolders.

UseA,v buttons to select a desired folder.

Then press ENTER button on the remote control or front panel to confirm your selection.

3.The

screen enters the selected subfotder to view the files.

Use A, v buttons to select the desired file. Then press ENTER button on the remote control or front panel to confirm your selection•

4.Press

_ button to return to last folder or directory, or move the yellow bar to i' ,*, then press ENTER button on the remote control or front panel to return to the last folder or directory.

Note: Many discs have other items besides pictures.

STOP/

• button button once to stop playback.

Then press

PLAY button, the player will resume playback from the stopped point• Press this button twice to stop playback completely.

playback• Then press Hi button, the player wil!

resume playback from the stopped point• Press 'i

• button twice to stop playback completely.

,

PAUSE_I button

I_&))l buttons il

_,

Press PLAY button to resume normal playback• t: Press it again to resume normal playback•

'11!21

_,i Pressl,_,t PREV button to go to the previous file.

Press ,I.I NEXT button to go to the next file•

32

Picture CD Playback (continued_

REP button _'& _

Press REP button to repeat a track, all or cancel the repeat.

......

GOTO button _

J1 "''_

_

/l

Press GOTO button to select the desired folder o directly.

33

Picture CD Playback (continued_

_'_:_i vlow, buttons-,-,,,,

Press _,button to rotate the current picture clockwise:

Press _ button to rotate the current picture anti-clockwise:

Press A button to rotate the current picture flip horizontal:

Ii11) Normal

34

f

You can change the default settings of this unit to customize its performance preference.

to your own

Note: Set up the system while play is stopped or there is no disk in the player.

To set up your system:

I .Press the SETUP button.

The setup menu will appear on the screen.

It includes language setup, parental setup and preferences.

You can exit from the setup menu by pressing SETUP button again at any time during the setting.

2.Press

A or v (direction buttons) to select a sub-menu that you want to set up.

3.Press

A or v button to select the item that you want to set up in the sub-menu.

_' as at the left.

Press SETUP button, then the screen will display

)

Lan_ua_e Setup

1. OSD LANG

This item is used to set the OSD (on-screen display) language Press ) to enter the setup of this item.

There are eight languages for you to choose from,.

English is the default

Press A or v button to choose the preferred one.

Press ENTER to confirm your selection.

Press _ to exit from this item

35

2. AU DIO

This item is used to set the audio output language

Press * or_ button to highlight this item.

Press ) to enter the setup of this item

There are several languages for you to choose from, English is the default

_ii_iii!_i!iiiil

Press * or _button to choose the preferred

Language

Press ENTER to confirm your selection

Press _ to exit from this item.

3. DISC MENU

This item is used to set the menu language

Press * or_ button to highlight this item

Press ) to enter the setup of this item

There are several languages for you to choose•

English by default

Press * or _ button to choose the preferred

Language

Press ENTER to confirm your selection

Press _ to exit from this item•

/

& :

f

,,:

4. SUBTITLE

This item is used to set the subtitle language•

Press * or_ button to highlight this item.

Press ) to enter the setup of this item.

There are several languages for you to choose

English by default•

Press * or _button to choose the preferred

Language•

Press ENTER to confirm your setection

Press _ to exit from this item

36

Preferences

1 .TV DISPLAY

This item is used to set TV display mode.

Press ) button to enter the setup of this item

It includes 4:3 PS (default), 4:3 LB and 16:9,

Press _ or _ button to choose the preferred one Press ENTER to confirm your selection

Press _ to exit from this item.

Note: Select 4:3 PS or 4:3 LB when a 4:3 TV is connected.

Setect 16:9 when a 16:9 wide screen TV is connected.

9

2. ANGLE MARK if the scene was shot from multipte angles, you can change the camera angle of the scene you are watching feature

Not all DVD discs have this

Press = or _ button to highlight this item.

Press _ button to enter the setup of this item.

On

(default): Select on, an angIe icon will appear on the screen You wilI be notified if alternative viewing angles are available

Off: There will no angle icon appear on the screen.

Press _ or _ button to select on or off Press

ENTER to confirm your selection Press _ to exit from this item

/

37

I i

I IiJi!i

i, i k

-

!

3. RESUME

This item is used to set last memory state.

This allows you to continue play from where a disc was stopped, even if the power is turned off or the disc tray cover is accidentally opened

For this function to work, the disc must remain in the player

Press A or v button to highlight this item

Press ) to enter the setup of this item.

The default setting of this item is ON.

Press A or v button to choose on or off.

Press ENTER to confirm your seleclon

Press'_ to exit from this item.

This item is used to reset the unit.

Press _ or v button to highlight this item.

Press _ to enter this item.

Press ENTER to reset

Then al the settings of your unit are back to the factory defaults

38

Dolby Digital

Dolby Digital is a technology developed by Dotby Laboratories•

Audio tracks encoded in Dotby Digital can reproduce from one to 5.1 discrete channels of excellent quality audio.

Letterbox screen

This refers to a screen on which the playback picture of wide-screen DVDs appears with black bands running along the top and bottom.

Pan & Scan screen

This refers to a screen on which the playback picture of wide-screen and right sides.

Title, Chapter (DVD)

DVDs is cut off at the left

DVDs are divided into some large sections (titles) or some small sections (chapters)• Each section is numbered: these numbers are called "Title number" or "Chapter number"•

Title I Title 2

Chapter 1

Chapter 2

Chapter

Chapter

Track (CD)

CDs are divided into some sections (tracks)• Each section is numbered; these numbers are called "Track numbers".

Track 1 Track 2 Track 3 ......

JPEG

has small file size and low quality loss create a digital photo album from film pictures, have a photo processing shop make a "PICTURE CD" in JPEG format.

The figure on the right displays the root folder, folders and files of a typical picture

CD.

=.........

....

................

...........

39

there

Disconnect theunit.

orexcessive coming

Never open or try to repair the unit yourself.

There are no user serviceable parts inside.

Sl_ uS I 'OS fTThe disc cover may not be closed.

Close the disc cover.

There may not be a disc in the DVD drive

Put a disc into the DVD drive.

The disc may not be put in the right way.

Put the disc in with the label side up.

The disc may be dirty or Clean or changethe disc warped

The player's region code may not be the same as the region code of DVD disc.

Make sure the player's region code is the same as the code of DVD disc

There may be water on the lens

Remove the disc and shut the player offfor at least two hours to dry.

The battery may be dead.

Charge the battery or use the AC or car adapter.

fThe system connection may be not correct,

The speaker volume may be turned down.

Connect correctly.

the system

Turn the volume up with the volume controI

The sound setup of the DVD disc may be not correct

\

The disc may be dirty or warped.

Setup the sound of the DVD correctly

CIean or change the disc.

4O

be in correct video mode

The system connection may be not correct

" The LCD may be off or not the correct video mode

Connect the system| correctly.

Turn on the LCD and choose'_

Switch the DVD/AV IN switch to DVD.

|

E

J

I he disc may be dirty or Clean or change the disc

Other possibilities:

Static or other external interference may cause the player function abnormally.

In order to recover normal status, unplug the power supply cord and then plug it into the outlet again to reset the player.

If the problems still exist consult your service center or qualified technician.

4]

TFT screen

size

7 inches

Laser Wavelength

Video System

Frequency Response

780/650 nm

NTSC

20Hz- -20kHz Z 2.5dB

Audio Signal-to-noise

Rate

Audio distortion+noise

Channel Separation

Dynamic

Audio

Video

Power

Out

Out

Range f85dB

% 70dB (lkHz) f70dB (lkHz)

Analog Audio Out

Video Out

AC 100-240V -_ fS0dB (lkHz)

0.2

Out Level: 15V±10, Load: 10K_

Out Level: 1Vp p±0.1, Load: 75_3

Unbalanced Negative

50/60Hz

Power Consumption

Dimensions

Weight

< 25W

195mmX149mmX38.5mm

(L*W*D)

About 1.2 kg

Compliance with FCC, FDAcUL listed E209155

DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE

WITHOUT NOTICE

42

support theUScall1-866-289-5168,

01-800-400-2443.

isa registered licensed

43