#211, 2 nd floor, Mainbuilding, Chinoy Trade Center (CTC),

Parklane, Secunderabad, A.P., India – 500003.

Telephone No.: 040 -27818386, Mobile No.: 9640791016

E – mail Id: [email protected]

METAL DETECTOR MD-5008

Ex-factory price: Rs.35,000 per set

Validity of the price: 7 days

Payment: Pay TT 100% before

Delivery Time: 10 days from the date of order place

Warranty: 1 year manufacturing warranty.

Features:

Using the MD-5008 metal detector, you can find anywhere coins, relics, jewelry, gold and silver products. This metal detector has many functions and easy to use.

MD-5008 metal detector can be also widely used in:

- The military applications ;

- The security check;

- Quick search of the public security department of criminal ;

- Detection of raw materials, fuel, metal object in food;

- Check metal object in the package, luggage;

- Detection of underground pipelines, cable;

- Found hidden treasures buried in the ground and the silver object and the gold object and the metal cultural relic.

Technical Data:

-Maximum detection depth: Small one is 1.5m, Big one is 3.5m. -Signal frequency：7KHz.

-Audio frequency：400Hz.

-Operating current：12DCV "AA" ( alkalinity) 8X1.5V. -Power：0.6W.

-Weight：3.2Kg.

-Packing: Each product packed by standard carton. Dimension of single set product package (L*W*H): 830mm*330mm*170mm. Besides, every four sets of products to a standard carton.

Main features are as follows:

Headphone Jack—— The detector can be connected to headphones (not supplied)

。

View metal and Pointer—— Shows the type of metal being detected

。

Volume Indicating—— When you find metal to issue fixed-frequency sound

。

Waterproof Search Coil—— Detectors in appropriate places

Note: Search panel is waterproof, but the control frame is not waterproof

。 Adjustable Stem——

Probe length can be adjusted to suitable location

Note: The metal detectors to be used eight 1.5V batteries

Button description ：

1 PUSH

2 TUNE

Zero adjustment button

Volume control buttons

3 SENSITIVITY Sensitivity adjustment button

4 GROUND BALANCE

5 DISCRIMINATION

Balance adjustment button

Identify the adjustment button

6 GROUND BALANCE——DISCRIMINATION

7 POWER ON——OFF

Balance / identify the toggle button

Power ON / OFF

1. ZEROING BUTTON

2.

Zero adjustment button (push) in the index finger of the hand grip position detector, click it shows the metal pointer returns to "0" position. Zero adjustment button with memory function, so it can remember working environment at work. For example: When the search panel on the ground holding ground signals so that the pointer deviation from the "0" position, you can press (push) the button that returns a pointer to "0." Then you can begin to detect the.

Near or at the metal detectors can not detect metal, do not press the zero adjustment button (push).

Should be noted that in the regulation before any other button to hold the zero adjustment button (push), when all the adjustment is completed and then release it.

In the detection period, as the environment changes, the pointer often deviate from the "0" position. By zero adjustment button is a pointer back to

"0." Therefore, the detection process must always press the button.

Open the detector in time to warm up to a minute, you press the button zero adjust pointer may deviate from the "0" position, in the warm-up will return to normal after all.

2. TUNE TURN BUTTON

Adjust the volume, slow voice sounded, the sound can be heard when called just the "critical voice." When it is in "critical voice", the detector has the highest sensitivity.

Note: in the regulation of the "critical voice" before the press zero adjustment button, release it after the adjustment.

If the "critical voice" increase, reduce or disappear, press the button to readjust the zero adjust it.

3. SENSITIVITY TURN BUTTON

Sensitivity adjustment button to control the sensitivity of the detector.

Rotate button in the end, when the sensitivity of the lowest (MIN), probing depth minimum. Clockwise rotation button in the end, when the highest sensitivity

(MAX), the greatest depth of the probe. Sensitivity adjustment to rely on testing environment, not the higher the sensitivity, the better

For example: a large number of minerals in those areas with high sensitivity lead to the wrong signal, the detector sounds anywhere, it can not accurately find the target. In this environment, the lower the sensitivity of the soil can reduce the complexity of the impact; relatively pure in those areas, the higher the sensitivity to detect the stronger the signal.

4. GROUND BALANCE TURN BUTTON

As the "mineralization reflect the" metal detector search disk send the wrong signal, with the search panel and the ground changes from the "critical voice" are also affected, it can not accurately identify the signal type (signal or metallic mineral signal) . To solve this problem, balancing circuit is designed to make the "mineralization reflect the" minimum.

Set to balance mode (GROUND BALANCE), then adjust the balance button.

Rotate button to balance the maximum (MAX), raised the search dial, set the

"critical voice" and slowly lower it, then the sound increased; spin button to a minimum (MIN), then repeat the above operation, when the sound down .

This experiment proved the rotation of both sides of the balance to the scale when the volume has changed and so must have a voice to maintain a stable point, the point is we want to set the "balance point."

Follow these steps to set the "balance point":

1) the first set to "balance" mode;

2) to search for fixed dish 24 inches in the ground where then adjusted to the

"critical voice";

3) to reduce the search dial to 8 inches off the ground where; if the sound increases, raising the search dial (up to 24 inches) and then rotate the volume control button to try, if you lower the sound, and then counterclockwise a little bit know the sound and stable. If we do reduce the sound when the above operation, the button clockwise until the sound and stable.

4) No matter how you adjust the volume, it is still elevated, it means the metal in the vicinity, looking for another to adjust.

5.) Raising the search dial in before the first press the "Zero Adjustment

Button" to set the "balance" and regulate "balance" the search after the lower plate, release "zero adjustment button."

After setting up the "balance" after the detector can eliminate "mineralization reflect the" freedom of the search panel to search the ground, and only find metal sound.

5. DISCRIMINATION TURN BUTTON

Identify the adjustment button to set the mode identification

(DISCRIMINATION) use.

When the rotation "to distinguish adjustment button" to a different location, you can choose not to signal. Through this feature, you can identify ferrous and non-ferrous metals, also can identify the same type of metal.

If the target is a piece of iron: when the search dial in the iron edge, it's the same reaction and ferrous metals; when the iron plate in the top of the search, it's the same response and non-ferrous metals. Therefore, we can identify a piece of iron in the ground, you can estimate its size.

Difference between iron and non-ferrous：

To "identify the adjustment button" transferred to the MIN (minimum) in this position. When you detect non-metallic pointer will rotate to the right, while the voice of the detector sounded. If you "identify adjustment button" transferred to the MAX (maximum) in this position, when you detect ferrous metals pointer to the right rotation, the sound detector sounded.

Note: in the regulation "to distinguish adjustment button" hold down "zero adjustment button," to regulate the release after it.

6. OPERATION MODE SWITCH (MODE)

Operation mode switch has two parts: balance (GROUND BALANCE) and identify (DISCRIMINATION).

The mode is set to "balance", this time on all metal detectors have response, no recognition, but you can eliminate "mineralization reaction" impact, has a strong penetrating power, stable, full instructions, Therefore, this model is often detected at the beginning when a region is selected.

The mode is set to "identify", the metal detector will be able to distinguish between the type and choose larger and more valuable metal.

Preparation:

Insert the batteries, turn on the power (POWER ON), power detector to work.

Usually do not just open the detector pointer refers to the middle position, but to one side, which means that the detector is not in a stable mode, you must hold, release "zero adjustment button," several times until the pointer is no longer tend to side. These are all normal. Detector requires a short warm-up time, during which the search panel to rest until the pointer points to "0" to begin work. When you press the button when the observed light, dark or if light is off, replace the battery.

During the probe, the operator holding the handle so that the search dial to move slowly on the ground, and ground search dial distance of 8 inches.

When they find the metal, the metal detector to respond to display the pointer

changes.

Take away anything like watches, rings, metal buttons, cigarette boxes and other things you carry around, put on shoes without nails.

Balance model:

This model can eliminate "mineralization reaction" and have more penetration, so no matter indoors or outdoors this model are used to prepare. In this mode, as long as the search moves to the target disk on the right, the sound detector sounded, indicating the pointer has changed and can cause any type of metal sound.

Set as follows:

1) Turn the power switch;

2) the mode is set to "balance";

3) to search for fixed dish 24 inches in the ground where, hold, release

"zero adjustment button," several times until the pointer back to warm-up detector "0";

4) Set the "critical voice";

5) set by the above mentioned "balance"; on the ground slow motion detectors, to keep the search panel and eight inches from the ground

Identify the model:

This model is used to identify ferrous and non ferrous metals, types of metal in a large selection of metal and then exclude the smaller metal. This model is not "balance" function, so "mineralization reaction" very serious, the operator should use caution.

Set as follows:

1) Turn the power switch;

2) The mode is set to identify;

3) Preheating;

4) Set the "critical voice";

5.) Identify ferrous and non ferrous metals (see concrete steps "to identify adjustment button" for instructions);

6) to eliminate unwanted target;

If you are indoors or in the dirty ground detection, there are a lot of metal trash, they are usually of no use in detecting the time to eliminate it.

For example: In one place a lot of nails, nail the detector signal will interfere with the work, in order to solve this problem, can put a nail on the ground, then the search disk after it, if the sound improved, according to live a little button and turn clockwise "to distinguish adjustment button" release button and then try again; repeatedly adjusted until the search through the nail plate when the sound does not change.

After adjustment, the detector will not be buried in the ground than nails and small iron nails respond, but it nails a big contrast to ferrous and non ferrous metals react.

Indoor testing and use.

1) to any wear on you like watches, rings and other metal jewellery removed, and the detector on the wooden or plastic table.

2) adjust the angle of the search dial so that the flat part facing the ceiling.

Note: Do not test the detector in the room; the floor in many buildings have metal will interfere with the goal to detect or completely mask the signal.

3.) 2cm away from the search panel where you intend to move a sample probe of the metal (like gold rings or coins).

Notes: (1) the search panel will not detect if you do not move, because the target must be moving at this time there is no motion detectors.

(2) When you move a coin, coin disk in parallel with the search dial, probe more easily detected.