AV Access 4KSP18-P User manual

4KSP18-P

1 x 8 HDMI 4K Splitter

User Manual

Disclaimers

The information in this manual has been carefully checked and is believed to be accurate. AV Access Technology Limited assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.

AV Access Technology Limited assumes no responsibility for any inaccuracies that may be contained in this document. AV Access

Technology Limited also makes no commitment to update or to keep current the information contained in this document.

AV Access Technology Limited reserves the right to make improvements to this document and/or product at any time and without notice.

Copyright

Copy, Reproduce, Distribute and/or Edit of this document or part of it as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights created by patent grant or registration of a utility model or design patent are reserved.

Copyright ©2016 AV Access Technology Limited All rights reserved.

Trademarks Notice

All products or service names mentioned in this document may be trademarks of the companies with which they are associated.

Contact Us

Business inquiry: [email protected]

Technical problems: [email protected]

Important Safety Instructions



Do not expose this device to rain, moisture, dripping or splashing.

No objects filled with liquids, such as vases, shall be placed on the device.



Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure the unit is well ventilated.



To prevent risk of electric shock or fire hazard due to overheating, do not obstruct the unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items.



Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.



Do not place sources of naked flames, such as lighted candles, on the unit.



Clean this device only with dry cloth.



Unplug this device during lightning storms or when unused for long periods of time.



Protect the power cord from being walked on or pinched, particularly at plugs.



Only use attachments / accessories specified by the manufacturer.



Refer all servicing to qualified service personnel.

Table of Contents

Overview ............................................................................................................... 2

Package Contents .................................................................................................................. 3

Front Panel ............................................................................................................................... 4

Rear Panel ................................................................................................................................. 5

EDID Presets ............................................................................................................................ 6

Installation Instructions ..................................................................................... 10

Specification ....................................................................................................... 12

Warranty ............................................................................................................. 14

Overview

Overview

4KSP18-P is a 1x8 HDMI splitter for HDMI 2.0 with 4k@60Hz 4:2:0 8 bit which reliably distributes one HDMI source signal to 8 HDMI displays.

It also provides EDID management which provides multiple EDID options for various output resolutions, and HDCP management which authenticates HDCP encryption between all devices, ensuring the

HDMI source reliably outputs correct content for display.

Additional features include input cable equalization and signal regeneration compensation, which reduces the need for additional signal conditioning equipment by compensating for signal loss when using a long input cable or cascading multiple units.



Distributes one HDMI source to 8 HDMI displays



HDMI 2.0 with 4K@60Hz 4:2:0 8bit



Automatic HDCP 1.4 compatibility



Independent DIP switch for EDID management



Multiple splitters can be cascaded to expand distribution



Threaded power port for locking or standard 12V DC connection



Front panel LED indicators for I/O and Power connectivity



Automatic input cable equalization and signal regeneration compensation www.avaccess.com

2

Overview

Package Contents

Before you start the installation of the product, please check the package contents:



1 x 4KSP18-P Splitter



1 x Power Supply (DC 12V 1.5A)



1 x Mounting Brackets (Pair)



1 x User Manual www.avaccess.com

3

Overview

Front Panel

ID Name

1 Input LED

2

1

Output LED

1~8

3 Power LED

2 3

Description

ON: HDMI source is connected to the splitter.

OFF: No HDMI source is connected to the splitter.

ON: HDMI display is connected to the splitter.

OFF: No HDMI display is connected to the splitter.

ON: The splitter is on.

OFF: The splitter is off. www.avaccess.com

4

Overview

Rear Panel

ID Name

1 12V DC

Description

12V DC power input, threaded port for standard or locking connection

2 HDMI OUT1~8 Connects to HDMI display devices

3 HDMI IN Connects to HDMI source device

4 EDID Choose different EDID modes www.avaccess.com

5

Overview

EDID Presets

EDID (Extended Display Identification Data) is data generated from each display in the system to communicate the capabilities of the device. The splitter features an EDID copy mode that can be used when the EDID does not meet the installation requirements. The EDID mode has several options available to encourage device communication.

Note: Repower the device to make the change effective.

Position Descriptions

0

1

2

Smart EDID (default setting)

[Note]

1080i, 2CH Audio

3

4

5

6

7

1080i, Dolby/DTS5.1

1080i, HD Audio

1080P, 2CH Audio

1080P, DOLBY/DTS5.1

1080P, HD Audio

3D, 2CH Audio

8

9

3D, DOLBY/DTS5.1

3D, HD Audio www.avaccess.com

6

Overview

Position Descriptions

10

11

12

1280x1024 DVI

1920x1080 DVI

1920x1200 DVI

13

14

15

Note:

4K@30HZ ,2CH Audio

4K@60HZ ,2CH Audio

Copy EDID from HDMI output1





If failed to copy EDID, the device will output 1080p with stereo audio.

Smart EDID:

Splitter is built-in 5 EDID: 4K@60Hz 4:4:4 HDR; 4K@60Hz 4:2:0

HDR; 4K@30Hz 4:4:4 HDR; 1080P@60Hz 2ch and 720P@60Hz 2ch. when the device is power on, it will compares all the EDID of display devices and choose the lowest resolution to compare with the 5 EDID that are built-in the splitter, finally select the one from the 5 EDID which can be supported by the lowest EDID display to the input source. In addition, the splitter will detect the output signals of every time plug, unplug, sink standby or sink on to select the appropriate EDID as above process.

Take 4K as an example: www.avaccess.com

7

Overview

First, switching a 4k source to 4K TV, the splitter will automatically output 4K signal to 4K TV.

Then, switching a 4k source to 1080P TV, the splitter will automatically output 1080P signal to 1080P TV. www.avaccess.com

8

Overview

Finally, switching the 4K source to 4K TV and 1080P TV, the splitter will automatically output 1080P signal to both 4K TV and

1080P TV. www.avaccess.com

9

Installation Instructions

Installation Instructions

1.

Using a quality HDMI cable, connect an HDMI source (such as

Blu-ray, games console, satellite/cable TV, media server etc.) to

HDMI IN port of the splitter.

Note: Ensure power supplies are disconnected from all devices before installation.

2.

Connect HDMI display devices (LED/LCD display or projector) to the HDMI OUT ports of the splitter.

3.

Insert the 12V power adapter into the power input port of the splitter and connect to power supply after ensuring the source and displays are properly connected.

4.

Check that the Power and HDMI IN/OUT LEDs on the front panel are fully lit for correct connection. If not, check cable connections.

Note: Both source and display devices must be powered on for the splitter to detect device connections. www.avaccess.com

10

Installation Instructions www.avaccess.com

11

Specification

Specification

Technical

Input

Output

Input / Output Signal

Type

1 x HDMI IN (Type A female connector)

8 x HDMI OUT (Type A female connector)

HDMI 2.0 with 4K@60Hz 4:2:0 8bit

Input / Output

Resolution Support

VESA:

640x480@60Hz, 800x600@60Hz,

1024x768@60Hz, 1280x768@60Hz,

1280x800@60Hz, 1280x960@60Hz,

1280x1024@60Hz, 1360x768@60Hz,

1366x768@60Hz, 1400x1050@60Hz,

1440x900@60Hz, 1600x900@60Hz,

1600x1200@60Hz, 1680x1050@60Hz,

1920x1200@60Hz.

SMPTE:

[email protected]/60Hz,

[email protected]/60Hz,

[email protected]/24Hz/25Hz/29.97Hz/3

0Hz/50Hz/59.94Hz/60Hz,

1920x1080i@50Hz/60Hz,

[email protected]/24Hz/25Hz/29.97Hz/

30Hz/50Hz/59.94Hz/60Hz

3840x2160@24Hz/25Hz/30Hz/50Hz/60Hz,

4096x2160@24Hz/25Hz/30Hz/50Hz/60Hz. www.avaccess.com

12

Specification

Technical

Input Video Level

Input DDC Signal

General

0.5~1.2 Vp-p

5 Vp-p

Operating Temperature 0 to 45°C (32 to 113 °F)

Storage Temperature -20 to 70°C (-4 to 158 °F)

Humidity

Power Supply

10% to 90%, non-condensing

DC 12V 1.5A

Power Consumption

(Maximum)

8W (4K@60Hz)

ESD Protection

Human-body Model:

±8kV(Air-gap discharge)/

±4kV(Contact discharge)

Device Dimensions

(W x H x D)

Product Weight

257.2mm x 18mm x 89.7mm

0.58kg www.avaccess.com

13

Warranty

Warranty

Products are backed by a limited 3-year parts and labor warranty. For the following cases AV Access Technology Limited shall charge for the service(s) claimed for the product if the product is still remediable and the warranty card becomes unenforceable or inapplicable.

1.

The original serial number (specified by AV Access Technology

Limited) labeled on the product has been removed, erased, replaced, defaced or is illegible.

2.

The warranty has expired.

3.

The defects are caused by the fact that the product is repaired, dismantled or altered by anyone that is not from an AV Access

Technology Limited authorized service partner. The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User

Guide.

4.

The defects are caused by any force majeure including but not limited to accidents, fire, earthquake, lightning, tsunami and war.

5.

The service, configuration and gifts promised by salesman only but not covered by normal contract.

6.

AV Access Technology Limited preserves the right for interpretation of these cases above and to make changes to them at any time without notice.

Thank you for choosing products from AV Access. www.avaccess.com

14

AV Access Technology Limited

V1.0.3