Pentax Optio Optio S Operating Manual

Digital Camera
Operating Manual
To ensure the best performance from
your camera, please read the Operating
Manual before using the camera.
Thank you for buying the Pentax Optio S Digital Camera.
Please read this manual before using the camera in order to get
the most out of all the features and functions. Keep this manual
safe, as it can be a valuable tool in helping you to understand all
the camera's capabilities.
Regarding copyrights
Images taken using the Optio S that are for anything other than personal
enjoyment cannot be used without permission according to the rights as
specified in the Copyright Act. Please take care, as there are even cases
where limitations are placed on taking pictures even for personal enjoyment
during demonstrations, industrial enterprise or as items for display. Images
taken with the purpose of obtaining copyrights also cannot be used outside
the scope of use of the copyright as laid out in the Copyright Act, and care
should be taken here also.
Regarding trademarks
•
•
•
•
The SD logo
is a trademark.
PENTAX is a trademark of PENTAX Corporation.
Optio is a trademark of PENTAX Corporation.
All other brands or product names are trademarks of registered trademarks of their respective companies.
• The USB driver uses software developed by inSilicon Corporation.
Copyright © 2002 inSilicon Corporation. All rights reserved.
• This product supports PRINT Image Matching II.
When used in combination, PRINT Image Matching II enabled digital still
cameras, printers and software help photographers to produce images
more faithful to their intentions.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation.
FOR SAFE USE OF YOUR CAMERA
Sufficient attention has been paid to the safety of this product but please
pay particular attention to the warnings indicated by the following symbols
during use.
Warning These symbols indicate that it is possible that the
user may experience serious difficulties
if the warnings are not heeded.
Caution These symbols indicate that it is possible that the
user may experience minor or middling difficulties or
physical difficulties if the warnings are not heeded.
Warning:
• Do not attempt to take the camera apart or remodel the camera. High voltages are
present within the camera, and there is therefore a danger of electric shocks.
• If the inside of the camera should become exposed as a result of, for example, the
camera being dropped, please do not under any circumstances touch such exposed
portions, as there is a danger of receiving an electric shock.
• Wrapping the strap of the camera around your neck is also dangerous, please take
care that small children do not hang the strap around their necks.
• To avoid the risk of it being swallowed by mistake, keep the SD Memory Card/
MultiMediaCard out of the reach of small children. Seek medical attention immediately
if accidentally swallowed.
• Use an AC adapter that are of the power and voltage specified for exclusive use with
this product. The use of an AC adapter other than that specified exclusively for use
with this product may cause fire or electric shocks.
• If the camera emits smoke or a strange smell, or in the event of any other irregularity,
stop using the camera immediately, remove the battery or disconnect the AC adapter
and contact your nearest Pentax service center. Continued use of the camera may
result in fire or electric shock.
• Discontinue use of the AC adapter during thunderstorms. This can cause a fire or
electrical shock.
Caution:
• Never try to disassemble, short the battery. Also, do not dispose of the battery in fire,
as it may explode.
• Remove the battery from the camera immediately if it becomes hot or begins to smoke.
Be careful not to burn yourself during removal.
• Some portions of the camera heat up during use, so please take care, as there is a risk
of low temperature burns if such portions are held for long periods of time.
• Do not place your finger on the flash when it is discharging as there is a risk of burns.
• If any of the battery leakage should come in contact with your eyes, do not rub them.
Flush your eyes with clean water and get medical attention immediately.
• If any of the battery leakage should come in contact with skin or clothes, wash the
affected areas thoroughly with water.
1
Care to be Taken During Handling
2
• Do not clean the product with organic solvents such as thinner or alcohol
benzene.
• Places of high temperature and humidity should be avoided. Particular
care should be taken regarding vehicles, which can become very hot
inside.
• Storing the camera where pesticides and chemicals are handled should
be avoided.
Remove from case and store in a well-ventilated place to prevent the
camera from becoming moldy during storage.
• Do not use the camera where it may come in contact with rain, water or
any other liquid, because the camera is not weather, water, or liquid
resistant. Should the camera get wet from rain, splashing water, or any
other liquid, wipe it off immediately with a dry soft cloth.
• Ensure that the camera is not subjected to substantial vibrations, shocks
or pressure.
Place the camera on a cushion for protection when the camera is subjected to the vibrations of a motorbike, car, or ship, etc.
• The liquid crystal display will become black at temperatures of approximately 60°C (140°F) but will return to normal when normal temperatures
are returned to.
• The response speed of the liquid crystal display becomes slow at low
temperatures.
This is due to the properties of the liquid crystal and is not a fault.
• Remove dust from the lens and viewfinder using a blower or clean off
dust using a lens brush.
• Periodic checks are recommended every 1 to 2 years in order to maintain
high-performance.
• When the camera has not been used for a long time, confirm that it is still
working properly, particularly prior to taking important pictures (such as at
a wedding or during travelling). Pentax is not responsible for consequential damages (costs incurred as a result of taking pictures, loss of benefits
that were to be obtained through taking pictures) arising from failure of
this product.
• If the camera is subjected to rapid temperature changes, condensation
may form on the inside and outside of the camera. Therefore put the
camera in a bag or plastic bag, and take the camera out when the difference in temperature has subsided.
• The temperature range in which the camera can be used is 0°C to 40°C
(32°F to 104°F).
• Avoid contact with garbage, dirt, sand, dust, water, toxic gases, salt, etc.
as this may cause damage to the camera. If rain or drops of water get
onto the camera, please wipe dry.
• Refer to “Precautions When Using an SD Memory Card/MultiMediaCard”
(p.17) regarding the SD Memory Card/MultiMediaCard.
• Be sure to use the rechargeable lithium-ion battery D-LI8 provided for this
camera. If you use any other battery the camera may be damaged or malfunction.
To users of this camera
• There is a possibility that recorded data may be erased or that the camera
may not function correctly when used in surroundings such as installations
generating strong electromagnetic radiation or magnetic fields.
• The liquid crystal panel used in the LCD display is manufactured using
extremely high precision technology. Although the level of functioning pixels
is 99.99% or better, you should be aware that 0.01% or fewer of the pixels
may not illuminate or may illuminate when they should not. However, this
has no effect on the recorded image.
• There is a possibility that the illustrations and the display screen of the
LCD monitor in this manual are different form the actual product.
3
Contents
FOR SAFE USE OF YOUR CAMERA ····················································1
Care to be Taken During Handling ··························································2
Contents ··································································································4
Contents of the Operating Manual ··························································7
Checking the Contents of the Package ··················································8
Name of Parts ·························································································9
Names of Operating Parts ···································································10
Getting Started ············································································11
Attaching the Strap ···············································································11
Powering the Camera ···········································································12
Charging the Battery ····································································12
Installing the Battery ·····································································13
Using the AC Adapter (optional) ··················································15
Installing the SD Memory Card/MultiMediaCard ··································16
Initial Settings ························································································18
Setting the Display Language ······················································18
Setting the Home Town ································································19
Setting the D.S.T. Mode ································································19
Setting the Date and Time ····························································20
Quick Start ····················································································22
Taking Still Pictures ···············································································22
Playing Back Still Pictures ····································································24
How to View the Recorded Images ······················································26
Common Operations ···································································28
Turning the Camera On and Off ···························································28
Playback Only Mode ·····································································28
Voice Recorder Mode ···································································28
Using the Button Functions····································································29
Capture Mode ···············································································29
Playback Mode ·············································································30
Voice Recorder Mode ···································································31
Setting the Menus ·················································································32
How to Set the Menus ··································································32
Menu List ······················································································34
Taking Pictures ············································································36
Setting the Shooting Functions······························································36
Changing the Mode ······································································36
Selecting the Focus Mode ····························································37
Selecting the Flash Mode ·····························································39
Displaying Shooting Information in Capture Mode ·······················40
Selecting the Recorded Pixels ·····················································41
Selecting the Quality Levels ·························································42
Adjusting the Color Balance according to Lighting
(White Balance) ············································································43
4
Changing the AF Area (Focusing Area) ·······································45
Setting the Light Metering Range to Determine the Exposure
(AE Metering) ···············································································46
Setting the Sensitivity ···································································47
Setting the Instant Review time (Instant Review) ·························48
Setting the Image Sharpness (Sharpness) ··································49
Setting the Color Saturation (Saturation) ·····································50
Setting the Image Contrast (Contrast) ·········································51
EV Compensation ········································································52
Taking Pictures·······················································································53
Setting the Functions (Standard Mode) ·······································53
Selecting the Picture Mode According to the Shooting Scene
(Picture mode) ··············································································54
Taking Pictures of Dark Scenes (Night-Scene Mode) ··················55
Taking Movie Pictures (Movie Picture Mode) ·······························56
Taking Panorama Pictures (Panorama Assist Mode) ···················58
Taking Pictures with Digital Filters (Digital Filter Mode) ···············60
Using Preset Function Settings (User Mode) ·······························62
Taking Stereo Pictures (3D Image Mode) ····································63
Continuous Shooting (Continuous Shooting Mode) ·····················68
Using the Self-Timer ·····································································69
Using the Remote Control Unit (optional) ····································70
Using the Zoom ············································································71
Taking Time-lapse Movie Pictures (Fast Fwd Movie) ···················73
Saving the Settings (Memory) ·······························································74
Saving the Menu Items (Memory) ················································74
Register Functions in User Mode ·················································75
Recording and Playback ····························································76
Recording Sound (Voice Recorder Mode) ·············································76
Playing Back Sound ···············································································77
Adding a Voice Memo ············································································78
Playback/Erasing/Editing ···························································79
Playing Back Images ············································································79
Playing Back Still Pictures ····························································79
Zoom Display ················································································79
Playing Back Movie Pictures ························································80
Displaying shooting information in Playback mode ······················81
Nine-image Display ······································································82
Slideshow ·····················································································83
Erasing Images ·····················································································84
Erasing a Single Image or Voice Memo ·······································84
Erasing All Images ·······································································86
Protecting Images/sound from Deletion (Protect) ························87
Viewing Images on a TV ········································································88
Setting the Printing Service (DPOF) ·····················································89
Printing Single Image ···································································89
Printing All Images ·······································································91
5
Editing Images ······················································································92
Changing the Image Size ·····························································92
Trimming Images ··········································································94
Copying Files ·························································································95
Viewing Images with your PC ·······························································96
About the included software ·························································96
System environment ·····································································96
Installing the software ···································································97
Displaying and copying images using ACDSee™ ······················100
Joining Panorama Images Using ACD Photostitcher ·················101
Disconnecting your camera from your PC ·································104
Viewing Images with your Macintosh ··················································106
About the included software ·······················································106
System environment ···································································106
Installing the software ·································································107
Displaying and copying images using ACDSee™ ······················108
Disconnecting the camera from your Macintosh ························109
Settings ······················································································110
Camera Settings ·················································································110
Formatting a SD Memory Card/MultiMediaCard and the Built-in
memory ······················································································110
Changing the Sound Settings ····················································111
Changing the Start-up Screen ···················································112
Setting the Date Style ································································113
Changing the Date/Time ····························································114
Setting the World Time ·······························································114
Changing the Display Language ················································116
Changing the Video Output Format ············································117
Sleep Timeout ············································································118
Setting Auto Power Off ·······························································118
Setting the Quick Delete Function ··············································119
Setting the Quick Zoom Function ···············································119
Registering Functions ·································································120
Resetting to Default Settings (Reset) ·········································121
Setting the Alarm ················································································122
Checking the Alarm ····································································122
Setting the Alarm ········································································122
Turning the Alarm Off ·································································123
Appendix ····················································································124
List of City Names ···············································································124
Optional Accessories ···········································································125
Messages·····························································································126
Troubleshooting····················································································128
Main Specifications ··············································································130
WARRANTY POLICY ··········································································132
6
Contents of the Operating Manual
This Operating manual contains the following chapters.
Getting Started
This chapter explains what you need to do after purchasing the camera before you start taking pictures. Be sure to read it and follow the
instructions.
Quick Start
This chapter explains the simplest way to take pictures and play back
images. Use it if you want to start taking pictures straightaway. It also
tells you how to use the SD Memory Card/MultiMediaCard.
Common Operations
This chapter explains common operations such as the functions of
the buttons and how to use the menus. For more details, refer to the
respective [Taking Pictures], [Recording and Playback],
[Playback/Erasing/Editing] and [Settings] chapters.
Taking Pictures
This chapter explains the various ways of capturing images and
how to set the relevant functions, including how to use the virtual
mode dial to change the shooting mode and how to select the
Picture mode best suited to the shooting scene.
Recording and Playback
This chapter explains how to record sound only or add a voice
memo to an image, and how to play back voice memos.
Playback/Erasing/Editing
This chapter explains how to play back images on the camera or on
a TV and how to delete images.
Settings
This chapter explains how to set the camera-related functions.
Appendix
This tells you about the messages displayed on the LCD monitor
and what to do in the event of trouble.
The meanings of the symbols used in this Operating manual are
explained below.
☞
memo
Caution
Picture Mode
indicates the reference page number for an
explanation of the related operation.
indicates information that is useful to know.
indicates precautions to be taken when
operating the camera.
The icons above the title show the Capture
modes, that can activate the function.
7
Checking the Contents of the Package
Camera
Optio S
Strap
O-ST5 (∗)
Software (CD-ROM)
S-SW8
AV cable
I-AVC7 (∗)
USB cable
I-USB7 (∗)
3D Image Viewer
O-3DV1 (∗)
Digital Camera
Operating Manual
To ensure the best performance from
your camera, please read the Operating
Manual before using the camera.
Rechargeable
Lithium-ion battery
D-LI8 (∗)
Battery charger
D-BC8 (∗)
Operating Manual
this manual
About items marked with (∗)
∗ Items marked with (∗) are also available as optional accessories. For other optional accessories, refer to the list on page 130.
✽ Type of AC plug cord
D-CO2A Australia / D-CO2B United Kingdom / D-CO2E Europe / D-CO2H
Hong Kong / D-CO2J Japan / D-CO2K Korea / D-CO2U North America,
Canada
8
Name of Parts
Front
Power switch
Remote control receiver
Shutter release button
Built-in flash
Flashlight sensor
Lens
Self-timer lamp
DC input terminal
Microphone
Strap lug
PC/AV terminal
Terminal cover
Back
Viewfinder
LCD monitor
Battery/Card cover
Tripod socket
9
Names of Operating Parts
Focus status lamp (green)
Flash status lamp (red)
/
button
/ / /
button
Shutter release button
Power switch
Zoom /
/
button
Four-way controller
(OK button in the center)
Speaker
Playback button
Display button
Menu button
Guide indications
A guide to available button operation is displayed on the LCD monitor during
operation. The buttons are indicated as shown below.
Four-way controller ()
Four-way controller ()
Four-way controller ()
Four-way controller ()
MENU button
10
Zoom / /
button (Only
for digital zoom and magnified playback)
Display button
button
button
Getting Started
Attaching the Strap
Getting Started
Pass the narrow end of the strap through the strap lug and pass
the other end through the loop.
11
Powering the Camera
Charging
indicator
Battery
c
Getting Started
To power outlet
x
Battery charger
z
AC plug cord
Charging the Battery
When using the camera for the first time or when the [Battery
depleted.] message is displayed, charge the battery.
z Connect the AC plug cord to the battery charger.
x Plug the AC plug cord into the power outlet.
c Place the battery in the charger so that the PENTAX name is
visible.
The charging indicator lights red while the battery is charging
and changes to green when charging is completed.
v When charging is completed, remove the battery from the
battery charger.
memo
Caution
12
• The time required for full charge is about 100 minutes maximum.
The appropriate ambient temperature range for charging the
battery is 0°C-40°C (32°F to 104°F).
• The charging time may vary depending on the ambient temperature and charging conditions.
• When the battery reaches the end of its service life, the time
that the camera can be operated becomes shorter even when
the battery is fully charged. In this event, replace the battery.
• Always charge the battery after purchasing or when it has
not been used for a long time.
• Do not use the battery charger D-BC8 to charge the battery
other than the rechargeable lithium-ion battery D-LI8, as the
charger may overheat or be damaged.
• If the battery is inserted correctly but the charging indicator fails
to light, the battery may be faulty. Replace with a new battery.
c
x
Battery/Card cover
z
Battery
Getting Started
Battery
lock lever
Installing the Battery
Install the battery provided. When using the camera for the first
time, charge the battery before installing.
z
x
c
memo
Caution
Slide the battery/card cover in the direction indicated by
the arrow and flip the cover open.
Insert the battery with symbol facing toward the LCD
monitor while using the side of the battery to press the
battery lock lever in the direction indicated by the arrow.
Close the battery/card cover.
To remove the battery, release the battery by using your finger
to press the battery lock lever in the same direction as when
you inserted the battery, and pull the battery out.
If you intend to use the camera continuously for a long period, use
of the AC adapter D-AC8 (optional) is recommended. (☞ p.15)
• Do not remove the battery when the camera is turned on.
• If you do not intend to use the camera for a long time,
remove the battery.
• If the camera is left without the battery for a long time, the
date setting will be reset.
• Insert the battery correctly. If the battery is incorrectly oriented, it may cause malfunction.
• Do not twist the battery/card cover more than is necessary
when it is open. Doing so may damage the cover.
13
● Approximate Operating Time (when the D-LI8 battery is fully
charged)
Number of recordable images : Approx. 160 (when 50% shooting
uses flash, LCD monitor ON)
Playback time
: Approx. 110 min.
Getting Started
* The description above is based on Pentax measuring conditions and
may vary depending on capture mode and shooting conditions.
Caution
Generally, battery performance is temporarily deteriorate as
temperature decreases. When the camera is used in a cold
environment, keep this product warm by holding it in some
protection against cold or inside the clothes. Battery performance once deteriorated due to low temperature will be
recovered when the batteries are returned to room temperature.
● Battery Level Indicator
You can check the battery level by the
the LCD monitor.
symbol displayed on
(lit green)
: Adequate power remains.
(lit green)
: Battery is running low.
(lit yellow)
: Battery is running very low.
↓
↓
↓
(lit red)
: Battery is exhausted.
↓
[Battery depleted.] : After the message is displayed,
the camera will turn off.
14
To power outlet
z
x
v
c
AC adapter
Getting Started
AC plug
cord
Using the AC Adapter (optional)
If you intend to use the LCD monitor for a long time or connect the
camera to a PC, use of the AC adapter D-AC8 (optional) is recommended.
z
x
c
v
Caution
Make sure that the camera is turned off and open the
terminal cover.
Connect the DC terminal on the AC adapter to the DC
input terminal on the camera, being sure to match the symbols.
Connect the AC plug cord to the AC adapter.
Plug the AC plug cord into the power outlet.
• Make sure that the camera is turned off when connecting
or disconnecting the AC adapter.
• Make sure that the AC plug cord and connecting cord are
inserted securely. If the cord becomes disconnected while
you are taking pictures, the data may be lost.
• When using the AC adapter D-AC8, be sure to read the
operation manual accompanying the AC adapter.
• When connecting the DC terminals, be sure to match the
symbols. Inserting the plugs with too much force may
damage them.
15
Installing the SD Memory Card/MultiMediaCard
Battery/Card cover
SD Memory Card/
MultiMediaCard
Getting Started
To remove the card,
push and pull out
This camera uses an SD Memory Card and MultiMediaCard.
Captured images are recorded on the SD Memory Card/
MultiMediaCard if a card is inserted ( icon on the LCD monitor),
or in the Built-in memory if no card is inserted (
icon on the LCD
monitor). Make sure that the camera is turned off before inserting
or removing the SD Memory Card/MultiMediaCard.
z
x
c
Open the battery/card cover.
Insert SD Memory Card/MultiMediaCard so the label
(the side with the symbol) is facing toward the LCD
monitor and push the card in until it clicks.
Close the battery/card cover.
To remove the card, eject the card by pressing it in the direction indicated by the arrow and pull it out.
Approximate Number of Recordable Images and
Recorded pixels/Quality levels
Quality levels
Recorded pixels
2048 × 1536
Best
()
Better
()
7
13
19
1600 × 1200
11
20
28
1024 × 768
26
47
62
640 × 480
57
89
119
Good
()
Movie images
(320 × 240)
30 sec. × 3
sets
• The above table indicates the number of images when using a 16MB
SD Memory Card.
• The above table is based on standard shooting conditions specified by
PENTAX and may vary depending on the subject, shooting conditions,
capture mode, SD Memory Card, etc.
16
Data Backup
Very occasionally, data stored in the Built-in memory becomes unreadable.
As a backup measure, we recommend that you download important data to
a PC or store the data in a media other than the Built-in memory.
• Make sure that the camera is turned off before opening the battery/Card
cover.
Write-protect
• The SD Memory Card/MultiMediaCard is equipped with a
switch
write-protect switch. Setting the switch to [LOCK] protects the
existing data by prohibiting recording of new data, deletion of
existing data or formatting of the card.
Getting Started
Precautions When Using a SD Memory Card/MultiMediaCard
• Care should be taken if you remove the SD Memory Card/MultiMediaCard
immediately after using the camera, as the card may be hot.
• Do not remove the SD Memory Card/MultiMediaCard or turn the camera off
while data is being recorded on the card or transferred to PC using USB
cable as this may cause the data to be lost or the card to be damaged.
• Do not bend the SD Memory Card/MultiMediaCard or subject it to violent
impact. Keep it away from water and store away from high temperature.
• Be sure to format unused SD Memory Card/MultiMediaCard or SD Memory
Card/MultiMediaCard that have been used on another camera. Refer to
“Formatting a SD Memory Card/MultiMediaCard and the Built-in memory”
(p.110) for instructions on formatting.
• Never remove the SD Memory Card/MultiMediaCard during formatting as this
may cause the card to be damaged and become unusable.
• The data on the SD Memory Card/MultiMediaCard may be erased in the following circumstances. Pentax does not accept any liability for data that is
erased
• when the SD Memory Card/MultiMediaCard is mishandled by the user.
• when the SD Memory Card/MultiMediaCard is exposed to static electricity
or electrical interference.
• when the card has not been used for a long time.
• when the card is ejected, the AC adapter is disconnected or the battery is
removed while the data on the card is being accessed.
• The SD Memory Card/MultiMediaCard has a limited service life. If it is not
used for a long time, the data on the card may become unreadable. Be sure
to make a backup of important data on a PC.
• Avoid using or storing the card where it may be exposed to static electricity or
electrical interference.
• Avoid using or storing the card in direct sunlight or where it may be exposed
to rapid changes in temperature or to condensation.
17
Initial Settings
Power switch
Getting Started
Four-way controller (OK
button in the center)
Playback button
Display button
Menu button
If the initial settings screen appears when you turn the camera
on, follow the procedure below to set the display language,
Home Town, DST, video output format and current date and
time. If the date and time that appear at the bottom right of the
LCD monitor when you turn the camera on for the first time is
not the current time, follow the instructions for “Changing the
Date/Time” (p.114) to set the correct date and time.
Setting the Display Language
You can choose the language in which the menus, error messages, etc. are displayed from the following: English, French,
German, Spanish, Italian and Japanese.
z
x
c
memo
18
Turn the camera on.
Use the four-way controller ()
to select the display language.
The default setting is English.
Press the four-way controller ().
The screen for setting the next item
will be displayed.
Initial settings
Language/
City
D.S.T
MENU
Exit
English
NYC
OK
Ok
• You can change the setting after it has been made. Refer to
“Changing the Display Language” (p.116).
Setting the Home Town
You can choose the city (Home Town) in
which you will use the camera.
Initial Setting
Language/
English
NYC
Press the four-way controller ()
to select the desired city (Home
Town).
x
Press the four-way controller ().
The screen for setting the next item will be displayed.
D.S.T
MENU
Exit
OK
Ok
Getting Started
memo
City
z
• See p.124 for the list of cities and corresponding code names.
• You can change the setting after it has been made. Refer to
“Setting the World Time” (p.114).
Setting the D.S.T. Mode
You can choose whether or not to display the D.S.T (Daylight
Saving Time) mode.
z
x
Use the four-way controller ()
to select
(On) or
(Off).
The default setting is
(Off).
Initial Setting
Language/
Press the four-way controller ().
The screen for setting the next item
will be displayed.
City
MENU
memo
English
NYC
D.S.T
Exit
OK
Ok
• You can change the setting after it has been made. Refer to
“Setting the World Time” (p.114).
19
Setting the Date and Time
Set the current date and time.
z
Getting Started
Use the four-way controller ()
to change the month.
Date Adjust
1 /
1 / 2003
0 : 00
MENU
x
Press the four-way controller ().
and will be displayed above
and below the day.
Exit
DISP
12/24 OK Ok
Date Adjust
1 /
1 / 2003
0 : 00
MENU
c
Use the four-way controller ()
to change the day and press the
four-way controller ().
and will be displayed above
and below the year.
Repeat Step c to change the
[year] [hour] and [minutes].
DISP
12/24 OK Ok
Date Adjust
10 / 20 / 2003
0
MENU
v
Exit
: 00
Exit
DISP
Exit OK Ok
12/24
Date Adjust
10 / 20 / 2003
0
MENU
b
Use the Display button to select
the 12-hour or 24-hour display
format.
: 00
Exit
DISP
Date Adjust
10 / 20 / 2003
11 : 19
MENU
20
Exit OK Ok
12/24
Exit
DISP
PM
Exit OK Ok
12/24
n
• When the initial settings screen is displayed, you can cancel
the settings operation and switch to Capture mode by pressing the MENU button. If this is done, the initial settings screen
will be displayed next time you turn the camera on.
• You can change the settings after they have been made.
Refer to “Changing the Date/Time” (p.114).
Getting Started
memo
When you have finished the settings, press the OK button when the clock reaches 00 seconds.
The camera is ready to take a picture.
When you set date and time except the initial settings,
press the OK button again after pressing the OK button
when the clock reaches 00 seconds to return to capture
mode.
21
Quick Start
Taking Still Pictures
Shutter release button
Power switch
Viewfinder
Quick Start
LCD monitor
Display button
Zoom /
/
button
For the simplest procedure to take still pictures:
The flash fires automatically depending on the light conditions.
z
x
Press the power switch.
The camera will turn on.
Confirm the subject and
shooting information on the
LCD monitor.
The focus frame in the middle of
the LCD monitor indicates the
zone of automatic focusing. You
can change the size of the subject by pressing the Zoom button.
200
10/20/2003
11:19
Focus Frame
: makes the subject bigger.
: makes the subject smaller.
You can check the size of the subject by looking through
the viewfinder.
memo
22
As there is no focus frame in the viewfinder, be sure to
check the focusing area on the LCD monitor.
c
Using the Shutter Release Button
The shutter release button works in a two-step action.
Press halfway
When the shutter release button is pressed lightly (halfway),
the focus, exposure and white balance are locked.
The shutter speed and aperture settings are only displayed
when the shutter release button is pressed lightly (halfway).
You can find the following information on the LCD monitor,
the status lamp and the flash lamp.
Autofocus frame
If the subject is in focus, the frame will light green. If the
subject is out of focus, the frame will not be displayed.
Focus status lamp & Flash status lamp
status
lit
blink
Focus status lamp (green)
Subject is in focus
Subject is out of focus
Quick Start
Press the shutter release button.
The image will be displayed on the LCD monitor for 1
second (Instant Review) and recorded on the
SD Memory Card/MultiMediaCard or the Built-in memory. (The green and red lamps on the right of the
viewfinder blink alternately while the image is being
recorded on the SD Memory Card/MultiMediaCard or
the Built-in memory.)
Flash status lamp (red)
Flash is charged
Flash is charging
You cannot take a picture while the flash is charging.
Pressed down fully
The picture is taken.
Instant Review
The Instant Review default setting is 1 second. During this
time you can delete the image by pressing the
button
(The [Delete] menu will be displayed.), and selecting
[Delete], and then pressing the OK button.
You can also record a voice memo by pressing the OK button during Instant Review (☞ p.78).
Setting the Instant Review Time ☞ p.48
23
Quick Start
Playing Back Still Pictures
Quick Start
LCD monitor
Four-way controller
(OK button)
Playback button
Playing Back Images
You can display the still picture.
z
Press the Playback button after taking a picture.
The image taken will be dis-played on the LCD monitor.
Playing Back Previous or Next Images
Still images can be played back one at a time, proceeding
either forward or backward.
z
x
Press the Playback button after taking a picture.
An image will be displayed on the LCD monitor.
Press the four-way controller ().
displays the previous image.
displays the next image.
24
Deleting the displayed image.
memo
File No.
100-0020
Delete
Cancel
MENU
Exit
All Images Sound
OK
Ok
Quick Start
During this time you can erase
the image by pressing the
button (The Delete screen will be
displayed.), press the four-way
controller () to select [Delete],
and then pressing the OK button.
Press the Playback button again
or press the shutter release button halfway to return to capture
mode.
• When the screen is changed to the playback screen, the
image with the largest file number will be displayed first
• You can enlarge the image displayed on the LCD monitor
by pressing the Zoom / / button.
• In the case of movie pictures, the first frame will be displayed.
• If there are no images stored, the [No image&sound] message will be displayed.
Zoom Display ☞ p.79
25
Quick Start
How to View the Recorded Images
Quick Start
Instead of using the Built-in memory, images taken with this camera
can be recorded on the SD Memory
Card/MultiMediaCard. You can view
the images recorded on the card on
the camera itself, transfer them to
your PC and print them out.
Viewing images on the camera
One of the advantages of a digital
camera is that it enables you to view
your pictures immediately after you
have taken them. You can check the
composition and brightness and take
the picture again if you are not satisfied.
Playing Back Still Pictures
☞ p.79
Viewing images on a TV
If you want to show your pictures to friends, you can display
them on your TV monitor. To view images on your TV, connect the camera to the TV with the video cable.
Viewing Images on a TV
26
☞ p.88
Viewing images on a PC
☞
Viewing Images with your PC
p.96
Viewing Images with your Macintosh
Quick Start
Once you have installed the USB driver on your PC, you can view
recorded images and edit them on your PC just by connecting the
camera to the PC with the USB cable and downloading the images.
Or you can remove the SD Memory Card/MultiMediaCard from the
camera and transfer the data to your PC using a card reader. If you
use a laptop computer, you can transfer the image data by fitting
the SD Memory Card/MultiMediaCard into the card adapter and
inserting the card adapter into the card slot. (To remove the
SD Memory Card/MultiMediaCard from the camera and transfer
images using another device, refer to the operating manual for the
device.)
☞ p.106
Printing images by a printing service
Prints of images recorded on the SD Memory Card/MultiMediaCard
can be ordered in the same way as with conventional photographs
by taking the SD Memory Card/MultiMediaCard to a store that
performs printing.
The number of prints can be specified and dates can be included in
the prints if DPOF (Digital Print Order Format) is set before taking
the SD Memory Card/MultiMediaCard to a store that performs
DPOF printing.
Setting the Printing Service
☞ p.89
27
Common Operations
Turning the Camera On and Off
z Power switch
Playback button
z
Common Operations
Press the power switch. (The power switch is illuminated
by a green light.)
The camera will turn on.
When the camera is turned on, the lens extends.
Press the power switch again to turn the camera off.
Playback Only Mode
Press the power switch on while pressing the Playback button activates the Playback Only mode.
• When the camera turns on in Playback Only mode, the
lens does not extend.
• To switch from Playback Only mode to Capture mode,
turn the camera off and then turn it on again.
Playing Back Still Pictures
☞ p.79
Voice Recorder Mode
Holding the power switch down for more than 2 seconds
activates the Voice Recording Only mode. (The power
switch is illuminated by a red light.)
• To switch from Voice Recording Only mode to Capture
Only mode or Playback Only mode, turn the camera off
and then turn it on again.
Recording Sound Only
28
☞ p.76
Using the Button Functions
button
Changes the flash mode. (☞ p.39)
button
Changes the focus mode as follows. (☞ p.37)
Macro mode (☞ p.37)
Super macro mode (☞ p.37)
Infinity-landscape mode (☞ p.37) Manual focus mode (☞ p.38)
Move focusing area (☞ p.38)
Zoom button
Changes the size of the subject. (☞ p.22)
Four-way controller ()
Changes the EV compensation in all modes. (☞ p.52)
The function registered on the four-way controller can be
changed in the Fn settings. (☞ p.120)
Adjusts the ratio when the digital filter is set to Slim Filter
on the virtual mode dial. (☞ p.60)
Four-way controller ()
() Selects self-timer mode, remote control mode and continuous
shooting mode.
() Displays the virtual mode dial and changes the shooting mode
Adjusts the focus in
mode. (☞ p.38)
OK button
Determines the Menu items. (☞ p.32)
MENU button
Displays the active menus in [Rec. Mode], [Playback] and [Set-up]. (☞ p.32)
Display button
Changes the information displayed on the LCD monitor. (☞ p.40, 81)
Playback button
Switches to Playback mode. (☞ p.24).
Common Operations
Capture Mode
29
Playback Mode
Common Operations
button
Deletes the image. (☞ p.84)
button
Protects the image from erasure. (☞ p.87)
Zoom / /
button
displays nine images at once. (☞ p.82)
– + changes the size of the Zoom Display image, displayed on the LCD monitor. (☞ p.79)
Four-way controller ()
() Sets the DPOF (☞ p.89) for the print service.
() Displays the image you wish to view. (☞ p.25)
MENU button
Displays the active menus in [Playback] and [Set-up].
(☞ p.32)
OK button
Determines the Menu items. (☞ p.32)
Display button
Changes the information displayed on the LCD monitor.
(☞ p.40, 81)
Playback button
Switches to Playback mode. (☞ p.24)
memo
30
• When the camera is turned on in Playback Only mode, pressing the Playback button does not change the mode to the
Capture mode.
Turn the camera off and turn it on again to switch from playback only mode to capture mode.
Voice Recorder Mode
When pressed, starts recording, and when pressed again,
stops recording.
Four-way controller
() Starts playback. When pressed during playback,
pauses playback.
() Selects a recorded file before playback.
If there are no recorded indexes:
When () is pressed during playback, rewinds 5 seconds.
When () is pressed during playback, advances 5
seconds.
If there are recorded indexes:
When () is pressed during playback, plays back
starting from the previous index.
When () is pressed during playback, plays back
starting from the next index.
Playback button
Switches between Voice Recorder Mode and Playback
mode.
MENU button
When pressed during recording, an index can be added.
Common Operations
Shutter release button
When the shutter release button is pressed for more than 1 sec-
memo ond, recording continues for as long as the button is held down
and stops when the button is released.
31
Setting the Menus
When you press the MENU button, the menus are displayed on the
LCD monitor. You can set functions, save the settings, and change the
camera settings on these menus.
How to Set the Menus
When you are making settings from a menu, a guide to operation is displayed on the LCD monitor.
Common Operations
z
x
Press the four-way controller ().
Use the four-way controller () to select the menu screen.
c
Use the four-way controller () to select an item.
Use the four-way controller () to move the frame up or
down.
v
v’
b
Caution
32
Press the MENU button.
The menu screen will be displayed. The selected area will
be displayed in a green frame.
Use the four-way controller () to change the setting.
If there is a Select screen, use the four-way controller ()
to move to the Select screen.
When you have finished making the settings, press the OK
button to return to the menu.
Press the OK button.
The settings will be saved and the screen will return to capture or playback status.
• If you press any buttons except the OK button before
press the OK button and leave the menu screen, any
changes to setting will not be saved.
• Even if you press the OK button and leave the menu
screen, if you remove the battery before turning off the
camera or do not otherwise turn off the camera correctly,
any changes to setting will not be saved.
Example of menu operation
z MENU button
x
[
[
Rec.Mode] menu
Playback] menu
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
MENU
Exit
[
Set-up] menu
Playback
Rec. Mode
2048 1556
Copy image&Sound
Resize
Trimming
Alarm
Slideshow
AWB
Multiple
Set-up
Format
Sound
Start-up Screen
Date Style
Date Adjust
World Time
Off
3sec
Auto
OK
1/1
Ok
MENU
Exit
OK
Ok
1/3
MENU
Exit
On
On
mm/dd/yy
1/ 1/2003
Off
OK
Ok
c
Common Operations
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
MENU
Exit
2048 1556
AWB
Multiple
Auto
OK
Ok
v
c
Rec. Mode
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
MENU
Exit
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
2048 1556
AWB
Multiple
Auto
OK
1/3
Ok
MENU
Exit
2048 1556
AWB
Multiple
50
OK
Ok
v’
c
Select screen
Rec. Mode
Digital Zoom
Instant Review
Fast Fwd Movie
3D Mode
Memory
Sharpness
2/3
MENU
Exit
Alarm
On
2sec
Off
Parallel Mode
OK
Ok
Flash
White Balance
EV Compensation
Digital Zoom
AE Metering
Sensitivity
1/2
MENU
Exit
OK
Ok
c
To the next screen
•
memo
•
If you press the shutter release button halfway to leave the menu screen and
switch to Capture mode (playback mode in playback only mode), any
changes to the setting will not be saved.
When you display the menu from Capture mode, the [Rec. Mode] menu will
be displayed, and when you display the menu from Playback mode, the
[Playback] menu will be displayed.
33
Menu List
[
Rec.Mode] Menu
: Adjustable
: Any changes made are invalid.
Item
Description
Default Setting
Recorded
Pixels
For selecting the size of recorded
pixels.
2048 × 1536
Quality Level
For selecting the image compression rate.
White Balance
For adjusting the color balance
according to lighting.
Reference
Common Operations
320 × 240
p.41
p.42
AWB (Auto)
p.43
p.45
p.46
[
]
Focusing Area For changing the Area of the autofocus.
(Multiple)
AE Metering
For setting the metering method to
determine the exposure.
Sensitivity
For setting the Sensitivity.
Auto
p.47
Digital Zoom
For taking digital zoom pictures.
On
p.71
Instant Review
For setting the instant review time.
1 sec
p.48
p.73
(3D only)
p.63
Fast Fwd Movie For setting the startup, shutter and Off
button operation sounds.
3D Mode
For taking 3D pictures.
Memory
For saving the shooting function settings when the camera is turned off. Normal
p.74
Sharpness
For setting the sharpness.
Normal
p.49
Saturation
For setting the saturation.
Normal
p.50
Contrast
For setting the contrast.
Normal
p.51
EV
Compensation
For adjusting the exposure
between –2.0 and +2.0.
±0.0
p.52
memo
34
Panorama Picture Mode
•
Parallel mode
For “” items, you can change the setting on the menu screen, however,
any changes are invalid in actual operation.
[
Playback] Menu
Item
Description
Reference
Copy image & Sound
For copying files between the Built-in memory and the
SD Memory Card/MultiMediaCard.
p.95
Resize
Changes the size of images
p.92
Trimming
For trimming images
p.94
Alarm
For setting the alarm to ring at a specific time
p.122
Slideshow
Recorded images are played successively.
p.83
Set-up] Menu
Item
Description
Reference
Format
For formatting the SD Memory Card/MultiMediaCard
p.110
Sound
For setting the startup, shutter, button operation sounds, and the volume
p.111
Start-up Screen
For setting the Start-up screen when the camera is turned on.
p.112
Date Style
For setting the date style
p.113
Date Adjust
For adjusting the date and time
p.114
World Time
For setting the world time
p.114
Language/
For changing the language in which menus and messages are displayed
p.116
Video Out
For setting the video output format
p.117
Sleep Timeout
For setting the power saving function
p.118
Auto Power Off
For turning off the power automatically
p.118
Quick Delete
When this option is turned on, the Delete screen is displayed with
[Delete] or [All Images] selected.
p.119
Quick Zoom
For playing back images at the maximum zoom size with the Zoom
button pressed only once
p.119
Fn Setting
For registering a function on the four-way controller ( )
p.120
Reset
For returning the camera settings to defaults
p.121
Common Operations
[
35
Taking Pictures
Setting the Shooting Functions
Changing the Mode
Capture mode is for taking pictures and Playback mode is for
playing back or erasing images.
Switching between Capture Mode and Playback Mode
• To change from Capture mode to Playback mode, press the
Playback button.
• To change from Playback mode to Capture mode, press the
Playback button or the shutter release button halfway.
Selecting the Capture Mode
Taking Pictures
Display the virtual mode dial and select the shooting mode.
There are 8 modes to choose from.
Lets you set all the functions.
p.22
Picture mode
Lets you set the functions according to the situation. There are 7
available modes in Picture mode.
p.54
Night-Scene mode
Lets you take dark scenes such as p.55
night views.
(Default
setting)
z
x
c
36
Standard mode
Movie Picture mode Lets you take movies.
p.56
Panorama Assist
mode
Lets you take panorama pictures.
p.58
3D Image mode
Lets you take 3D pictures.
p.63
Digital Filter mode
Lets you set a color filter.
p.60
USER mode
Lets you activate the preset function settings simply by turning the
camera on.
p.62
Press the four-way controller () in
Capture mode.
The virtual mode dial appears.
Move the icon for the desired
mode to the top of the dial using
the four-way controller ( ).
The icon will be surrounded by a
green frame.
Press the OK button.
OK
Ok
z
Selecting the Focus Mode
Focus Mode
(No icon) Autofocus mode
Macro mode
This mode is used when the distance to the subject is
approx. 18 cm – 50 cm (7 inch – 20 inch). When the
shutter release button is pressed halfway, the camera
is focused on the object in the autofocus area.
Super macro mode
This mode is used when the distance to the subject
is approximately 6 cm – 20 cm. (2.4 inch – 8 inch).
The camera is focused on the subject in the autofocus area continuously pressing with the shutter
release button halfway.
Infinity-landscape mode
This mode is used for taking distant objects.
Manual focus mode
Adjust focus manually by the four-way controller ().
Focusing area mode
The position of the autofocus area is changed.
z
Taking Pictures
The camera is focused on the subject in the autofocus area when the shutter release button is pressed
halfway. Use this mode when the distance to the
subject is more than 40 cm (1.3 ft).
Press the
or
button in Capture mode.
The focus mode changes each time the button is pressed
and the setting is displayed on the LCD monitor.
The camera is ready to take the picture in the set focus mode.
• The default setting of the focus mode is [Autofocus mode].
memo • The zoom position is fixed at the middle and the flash will not
discharge in [Super Macro Mode].
• When the movie picture mode (☞ p.56) is selected, the
focus mode is set to Autofocus mode, Infinity-landscape
mode and Manual focus mode.
• The flash does not fire in Super Macro mode.
37
Caution
If you take a picture while looking through the viewfinder
when the focus mode is set on Macro and Super Macro, the
range of the resulting picture will differ from what was seen
in the viewfinder.
Be sure to check the image on the LCD monitor.
Manual Focus
When the mode is set to
, the central portion of the picture
is enlarged to full screen on the LCD monitor for focus adjustment. Use the four-way controller to adjust the focus while
watching the indicator on the monitor.
For distant focus
For closer focus
Taking Pictures
After the focus is set, press any buttons except the four-way controller () or take a finger off from the four-way controller ().
The screen returns to the normal display two seconds later.
memo
• The central portion of the picture is not enlarged when the
digital zoom is enabled.
Saving the Focus Mode
☞ p.74
Changing the Focusing Point
In autofocus mode, you can change the focusing point by moving the autofocus area.
z
x
38
In focusing area mode, press the four-way controller
() to move the autofocus area.
Press the shutter release button.
To return the autofocus area to its original location, press
the
button again.
z
Selecting the Flash Mode
(No icon) Auto flash
The flash discharges automatically depending on the
light conditions.
The flash will not discharge, regardless of the brightness.
Flash On
The flash discharges regardless of the brightness.
Auto flash + Red-eye
Reduction
This mode reduces the phenomenon of red eyes caused
by the light from the flash being reflected in the subject’s
eyes. The flash discharges automatically.
Flash On + Red-eye Reduction This mode reduces the phenomenon of red eyes
caused by the light from the flash being reflected in the
subject’s eyes. The flash will discharge regardless of
lighting conditions.
memo
Taking Pictures
Flash Off
• The flash is off when the Capture mode is set to
, continuous shooting or infinity-landscape.
• In [Auto flash + Red-eye Reduction] and [Flash On + Red-eye
Reduction] modes, the flash discharges once to make the
pupils of the subject’s eyes smaller shortly before the main
flash discharges to take the picture.
z
Press the
button in Capture mode.
The flash mode changes each time the button is pressed
and the icon is displayed on the LCD monitor.
The camera is ready to take the picture in the set flash mode.
Status of the Focus Status Lamp and Flash Status Lamp
☞ p.23
Saving the Flash Mode ☞ p.74
Caution
Using the flash in Macro mode may cause the image to be
overexposed.
39
Displaying Shooting Information in Capture Mode
You can display information on the LCD monitor when shooting.
The display mode can be changed by pressing the Display button.
123 4 5 9 6
Display On
Shooting information is displayed.
q Flash mode w Shooting mode
e Focus mode r Capture mode
t AF frame
y Number of recordable images
u Date & time i Battery indicator
o Card/Built-in memory
198
10/20/2003
11:19
8
7
➞
3
1 72 4
198
2048
AWB
AUTO
10/20/2003
11:19
65
➞
Taking Pictures
Histogram Display
The brightness distribution of the image is
displayed.
The x-axis shows the brightness (darkest at
the left end and brightest at the right end)
and the y-axis shows the pixel numbers.
q Histogram
w Recorded pixels
e Quality level r White balance
t AE metering y Sensitivity
u Card/Built-in memory
➞
Display Off
No shooting information is displayed.
• The AF frame is displayed in
Autofocus mode.
• If any of the modes are changed such
as Flash mode, the mode you
have changed is displayed for a few
seconds.
➞
LCD Monitor Off
Turn off the LCD monitor.
(The LCD monitor is not turned off in
Playback mode.)
Display On
Caution
40
• The display cannot be turned off in
mode.
Saving the Display Mode
☞ p.74
,
,
and
Rec. Mode
xc
z
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
MENU
Exit
2048 1556
AWB
Multiple
Auto
OK
Ok
Selecting the Recorded Pixels
You can choose the number of recorded pixels from [2048 ×
1536], [1600 × 1200], [1024 × 768] and [640 × 480].
z
x
c
Suited for printing on A4 paper (8 1/2 × 11)
Suited for printing on A5 paper
Suited for printing on postcards
Suited for attaching to E-mails or for creating
websites
Select [Recorded Pixels] on the
[
Rec.Mode] menu.
Use the four-way controller ()
to change the size.
Press the OK button.
The camera is ready to take the
picture.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
memo
Taking Pictures
2048 × 1536
1600 × 1200
1024 × 768
640 × 480
MENU
Exit
2048 1556
AWB
Multiple
Auto
OK
Ok
• The recorded pixels is fixed at 320 × 240 pixels in the movie
picture mode.
• If you select a large size, the picture may appear distinct
when it is printed out.
41
Rec. Mode
xc
z
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
MENU
Exit
2048 1556
AWB
Multiple
Auto
OK
Ok
Selecting the Quality Levels
You can choose the image compression rate. The more stars,
the clearer the quality and the larger the volume.
The recorded pixels setting also changes the picture volume.
Taking Pictures
z
x
c
42
BEST
Lowest compression ratio. Suited for photo prints.
BETTER
Standard compression ratio. Suited for viewing the
image on a computer screen.
GOOD
Highest compression ratio. Suited for attaching to
emails or creating webpages.
Select [Quality Level] on the
[
Rec.Mode] menu.
Use the four-way controller ()
to select the size.
Press the OK button.
The camera is ready to take the
picture.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
MENU
Exit
2048 1556
AWB
Multiple
Auto
OK
Ok
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
xcv
z
1/3
MENU
2048 1556
AWB
Multiple
Auto
Exit
OK
Ok
Adjusting the Color Balance according to Lighting (White Balance)
You can take pictures in natural colors by adjusting the white
balance according to the light conditions at the time of shooting.
x
c
v
The camera adjusts the white balance automatically.
Daylight
Use this mode when taking pictures outside in sunlight.
Shade
Tungsten
Light
Use this mode when taking pictures outside in the shade.
Fluorescent
Light
Use this mode when taking pictures under fluorescent
light.
Manual
Use this mode when taking pictures by adjusting the
white balance manually.
Use this mode when taking pictures under electric or
other tungsten light.
Taking Pictures
z
Auto
Select [White Balance] on the
[
Rec.Mode] menu.
Press the four-way controller ().
The white balance screen will be
displayed.
White Balance
AWB
Use the four-way controller ()
to select the setting.
MENU
Exit
OK
Ok
Press the OK button twice.
The camera is ready to take the picture.
Saving the White Balance ☞ p.74
43
Manual Setting
z
x
c
v
Taking Pictures
44
Select [ ] (manual) on the white
balance screen.
White Balance
AWB
Point your camera at a blank sheet
of paper so that it fills the screen.
DISPLAY
Adjust
Press the Display button.
The white balance is automatically
adjusted, [Adjust] is displayed on
the LCD monitor and the display
returns to the menu screen.
MENU
Press the OK button.
The camera is ready to take the picture.
Exit
OK
Ok
Rec. Mode
xc
z
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
MENU
Exit
2048 1556
AWB
Multiple
Auto
OK
Ok
Changing the AF Area (Focusing Area)
You can change the angle of the autofocus area.
Multiple
Spot
x
c
Select [Focusing Area] on the
[
Rec.Mode] menu.
Use the four-way controller ()
to change the setting.
Press the OK button.
The camera is ready to take the
picture.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
MENU
Exit
2048 1556
AWB
Multiple
Auto
OK
Ok
Taking Pictures
z
Normal range
The autofocus range becomes smaller. (Spot)
The AF area does not appear in the viewfinder. Always check
memo the focusing area on the LCD monitor.
Saving the Focusing Area Setting ☞ p.74
45
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
xc
z
1/3
MENU
Exit
2048 1556
AWB
Multiple
Auto
OK
Ok
Setting the Light Metering Range to Determine the Exposure (AE Metering)
You can choose which part of the screen to use to measure the
brightness and determine the exposure.
Taking Pictures
z
x
c
Multi segment
Center-weighted
The exposure is determined by the entire screen.
The exposure is determined mainly by the center of the screen.
Spot
The exposure is determined by the small area in the center of
the screen only.
Select [AE Metering] on the
[
Rec.Mode] menu.
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
Use the four-way controller ()
to change the metering mode.
Press the OK button.
The camera is ready to take the
picture.
1/3
MENU
Exit
2048 1556
AWB
Multiple
Auto
OK
Ok
Saving the AE Metering Method ☞ p.74
When
is selected, the metering point moves in correspon-
memo dence with movement of the focusing area.
46
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
xc
z
1/3
MENU
2048 1556
AWB
Multiple
Auto
Exit
OK
Ok
Setting the Sensitivity
You can select the sensitivity to suit the brightness of the surroundings.
Sensitivity
100
200
z
x
c
The camera sets the sensitivity automatically.
• The lower the sensitivity, the sharper the image and the less
noise. The shutter speed will be slower in low light conditions.
• The higher the sensitivity, the faster the shutter speed in low
light conditions to reduce camera shake, but the image may
be affected by noise.
Select [Sensitivity] on the [
Rec.Mode] menu.
Use the four-way controller ()
to select the sensitivity.
Press the OK button.
The camera is ready to take the
picture.
Taking Pictures
Auto
50
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
MENU
Exit
2048 1556
AWB
Multiple
Auto
OK
Ok
Saving the Sensitivity ☞ p.74
47
Rec. Mode
xc
z
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
MENU
2048 1556
AWB
Multiple
Auto
Exit
OK
Ok
Setting the Instant Review time (Instant Review)
You can choose the Instant Review time from 0.5sec., 1sec.,
2sec., 3sec., 4sec., 5sec. or off (no display).
Taking Pictures
z
x
c
Select [Instant Review] on the [
Use the four-way controller ()
to select the display time.
Press the OK button.
The camera is ready to take the
picture.
Rec.Mode] menu.
Rec. Mode
Digital Zoom
Instant Review
Fast Fwd Movie
3D Mode
Memory
Sharpness
2/3
MENU
Exit
On
2sec
Off
Parallel
OK
Ok
The Instant Review setting is saved when the camera is turned
memo off.
48
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
xc
z
1/3
MENU
2048 1556
AWB
Multiple
Exit
Auto
OK
Ok
Setting the Image Sharpness (Sharpness)
You can choose whether you want the image to have sharp or
soft outlines.
c
Select [Sharpness] on the [
Rec.Mode] menu.
Use the four-way controller ()
to change the setting from
[Normal] to [Hard (+)] or [Soft (–)].
Press the OK button.
The camera is ready to take the
picture.
Rec. Mode
Digital Zoom
Instant Review
Fast Fwd Movie
3D Mode
Memory
Sharpness
2/3
MENU
Exit
On
2sec
Off
Parallel
OK
Ok
Taking Pictures
z
x
49
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
xc
z
1/3
MENU
2048 1556
Exit
AWB
Multiple
Auto
OK
Ok
Setting the Color Saturation (Saturation)
You can set the color saturation.
Taking Pictures
50
z
x
c
Select [Saturation] on the [
Rec.Mode] menu.
Use the four-way controller ()
to change the setting from
[Normal] to [Hard (+)] or [Soft (–)].
Press the OK button.
The camera is ready to take the
picture.
Rec. Mode
Saturation
Contrast
EV Compensation
3/3
MENU
Exit
± 0.0
OK
Ok
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
xc
z
1/3
MENU
Exit
2048 1556
AWB
Multiple
Auto
OK
Ok
Setting the Image Contrast (Contrast)
You can set the image contrast.
c
Select [Contrast] on the [
Rec.Mode] menu.
Use the four-way controller ()
to change the setting from
[Normal] to [Hard (+)] or [Soft (–)].
Press the OK button.
The camera is ready to take the
picture.
Rec. Mode
Saturation
Contrast
EV Compensation
3/3
MENU
Exit
± 0.0
OK
Ok
Taking Pictures
z
x
51
Rec. Mode
xc
z
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
MENU
Exit
2048 1556
AWB
Multiple
Auto
OK
Ok
EV Compensation
You can take pictures that are intentionally over-exposed or
under-exposed.
z
Taking Pictures
x
c
Select [EV Compensation] on the
Rec. Mode
Saturation
[
Rec. Mode] menu.
Contrast
Use the four-way controller () to EV Compensation
select the EV setting in the range
of –2.0 EV to +2.0 EV in 1/3 EV
steps.
3/3 MENU Exit
To brighten, set positive +.
To darken, set negative –.
Press the OK button.
The camera is ready to take the picture.
± 0.0
OK
Ok
Saving the EV Compensation Value ☞ p.74
EV Compensation is registered on the four-way controller ()
memo in the Fn default settings. ☞ p.120
Caution
52
The light metering method is either center-weighted or spot
when the EV setting is adjusted.
Taking Pictures
b
zxc
v
Setting the Functions (Standard Mode)
In Standard mode (
x
c
v
b
Press the four-way controller () in
Capture mode.
The virtual mode dial appears.
Use the four-way controller () to
).
select Standard mode (
OK Ok
Press the OK button.
Set the functions you want to use.
Refer to “Setting the Shooting Functions” (p.36 to p.52) for
details of how to set the functions.
Press the shutter release button.
The picture is taken.
Taking Pictures
z
), you can set all the camera functions.
Taking Still Pictures ☞ p.22
53
n
zxcvb
Selecting the Picture Mode According to the Shooting
Scene (Picture mode)
You can select the Picture mode according to the shooting scene.
Picture mode
There are nine available modes in Picture mode.
Landscape
Enables to take landscape photos with bright colors.
Flower
Enables to take flower photos bright in color.
Portrait
Enables to take portraits with spatial effect, by emphasizing the person.
Taking Pictures
Self-Portrait Enables you to take pictures of yourself or to be included in pictures.
Surf & Snow Enables to take clear photos at dazzling places like beaches and
snow covered mountains.
Autumn Colors
Enables you to take colorful photos of trees in autumn.
Sunset
Enables to reproduce beautiful colors for sunrise and sunset photos.
z
Press the four-way controller () in Capture mode.
The virtual mode dial appears.
x
Use the four-way controller () to
select the Picture mode dial ( ).
The default setting is ( ).
The Picture mode dial appears.
c
Press the four-way controller () to
select the desired mode.
v
Use the four-way controller () to
move the icon for the Picture mode
you want to set at the top of the
dial.
b
n
Press the OK button.
The Picture mode is selected.
OK
Ok
OK
Ok
Press the shutter release button.
The picture is taken.
In Picture mode, the EV compensation, saturation, contrast, sharp-
54
memo ness and white balance are automatically set to their default settings. You can change the settings.
v
zxc
Taking Pictures of Dark Scenes (Night-Scene Mode)
You can choose settings appropriate for taking pictures of dark
scenes, such as nightscapes.
Press the four-way controller () in Capture mode.
The virtual mode dial appears.
x
Use the four-way controller ()
to move the icon for night-scene
mode ( ) at the top of the dial.
c
v
Taking Pictures
z
Press the OK button.
Press the shutter release button.
The picture is taken.
OK
Ok
Using the shutter release button ☞ p.23
Playing back still pictures ☞ p.24
Caution
The shutter speed is slower when taking pictures of dark
scenes. To prevent camera shaking, secure the camera on a
tripod or other surface.
55
vb
zxc
Taking Movie Pictures (Movie Picture Mode)
This mode enables you to take moving images and sound.
The maximum length of one recording (1 set) is approximately
30 seconds.
Taking Pictures
z
x
Press the four-way controller ()
in Capture mode.
The virtual mode dial appears.
Use the four-way controller ()
to display the Movie Picture mode
at the top of the dial.
c
1
2 53 4
5
•12sec
10/20/2003
11:19
Press the OK button.
q Flash off mark w Movie picture mode icon
e Recordable time for next set r Number of remaining sets
t Card/Built-in memory
v
b
56
Press the shutter release button.
Shooting will start. You can change the size of the image
using the Zoom button.
: makes the image bigger.
: makes the image smaller.
Press the shutter release button.
Shooting will end.
Keeping the shutter release button pressed
If you keep the shutter release button pressed for more than
one second, pictures will be taken for as long as you keep the
button pressed. Shooting stops when you take a finger off from
the shutter release button.
Playing Back Movie Pictures ☞ p.80
Caution
Fast Forward Movie Mode ☞ p.73
Taking Pictures
• The flash will not discharge in Movie Picture mode.
• Infinity-landscape shooting is not possible in Movie
Picture mode.
• The LCD monitor cannot be turned off in Movie Picture
mode.
• Sound cannot be recorded when [Fast Fwd Movie] is set
to ON.
• Autofocus mode, Infinity-landscape mode and Manual
focus mode can be set in Movie Picture mode.
• Only the digital zoom can be used to change the size of
the image in Movie Picture mode. Use the LCD monitor
when recording a movie picture.
57
b
zxcvm
Taking Panorama Pictures (Panorama Assist Mode)
You can take a number of images and join them together to
form a panorama picture. The panorama software provided with
the camera and a computer that supports Windows are necessary for joining the images.
Taking Pictures
z
x
c
v
b
58
Press the four-way controller ()
in Capture mode.
The virtual mode dial appears.
Set shift direction
Use the four-way controller ()
to display the Panorama Assist
) at the top of the dial.
mode (
Press the four-way controller ().
Use the four-way controller to
choose the direction in which the
images will be joined.
Joins the images at the left.
Joins the images at the right.
Joins the images at the top.
Joins the images at the bottom.
The example shows the images when is selected.
Take the first picture.
Press the shutter release button to
take the first image. The right edge
of the image is displayed in transparent form on the left of the LCD
monitor.
n
m
memo
Caution
Move the camera to the right and
take the second picture.
Repeat the above procedure to take
the third and subsequent pictures.
Press the OK button.
The screen returns to Step v.
To cancel Panorama mode, change to another mode.
• The camera cannot join the images. Use the panorama
software provided with the camera.
• Continuous shooting is not possible in Panorama Assist
mode.
• A computer that supports Windows is necessary for joining images to form a panorama picture. (The software
provided with the camera is not supported by Macintosh.)
Taking Pictures
59
n
zxcvb
Taking Pictures with Digital Filters (Digital Filter Mode)
You can take pictures using digital filters. The filters consist of
color filters such as red, blue and green, and a slim filter that
produces a slim effect.
Taking Pictures
Color Filters
Eight color filters are provided: black-and-white, sepia, red, pink,
violet, blue, green and yellow. When you select a color filter in
the Digital Filter mode, the display on the LCD monitor is filtered
with the selected color, and the pictures are taken in that color.
Slim Filter
You can set the degree of slimness in 8 steps vertically or horizontally.
z
x
c
v
b
n
60
Press the four-way controller () in Capture mode.
The virtual mode dial is displayed.
Use the four-way controller () to select the Digital
Filter mode
.
Press the four-way controller ().
The filter options screen is displayed.
Use the four-way controller () to select the filter you
want to use.
Press the OK button.
Press the shutter release button.
The picture is taken.
Setting the slim filter
When you select the slim filter in Digital Filter Mode, the slimness setting screen is displayed.
z
Use the four-way controller () to set the slimness.
Decreases slimness.
Increases slimness.
x
Caution
Press the OK button.
The camera returns to digital filter mode.
• The digital zoom cannot be used when the slim filter is
selected.
Taking Pictures
61
v
zxc
Using Preset Function Settings (User Mode)
In User mode, you can take pictures using the functions and
settings registered in advance in User mode.
z
Taking Pictures
x
c
v
Press the four-way controller () in
Capture mode.
The virtual mode dial appears.
Use the four-way controller () to
select User mode (
).
Press the OK button.
Press the shutter release button.
The picture is taken.
Registering Functions in User Mode ☞ p.75
62
5
10/20/2003
11:19
,⁄0
xcvbnm
z
Taking Stereo Pictures (3D Image Mode)
You can take 3D pictures using the LCD monitor and view them
by the parallel method or cross method (p.65). If you print out
the 3D pictures and look at them through the 3D image viewer
provided, the image will appear in three dimensions.
The default setting is [Parallel]. If you do not need to switch to
[Cross], go to Step b.
z
x
c
v
Press the MENU button.
The [
Rec. Mode] menu will be
displayed.
Press the four-way controller ()
to select [3D Mode].
Rec. Mode
Digital Zoom
Instant Review
Fast Fwd Movie
3D Mode
Memory
Sharpness
2/3
MENU
Taking Pictures
Select the viewing mode.
On
2sec
Off
Parallel Mode
Exit
OK
Ok
Use the four-way controller ()
to select [Parallel].
To view the picture with the 3D image viewer, select [Parallel].
You can also view it without the image viewer.
Press the OK button.
The 3D image mode screen appears again.
Take the pictures
b
n
Press the four-way controller () in Capture mode.
The virtual mode dial appears.
Use the four-way controller () to select the 3D mode
.
63
m
,
.
⁄0
Taking Pictures
64
memo
Press the OK button.
The screen for taking the first image appears in the left half
of the LCD monitor.
14
Take the first image.
Hold the camera so that the subject
is in the middle of the left half of the
screen and press the shutter release
button. The image is displayed in the
left half of the LCD monitor. The right
half of the screen is for taking the
second image.
10/20/2003
11:19
14
Move the camera to the right without changing your stance.
Take the second image.
Make sure that the subject is in the
middle of the right half of the screen
and press the shutter release button.
• To cancel the 3D image mode change to another Capture
mode.
• A clear three-dimensional effect will not be achieved if the two
images are taken in widely different positions (heights) or are
not straight. When taking a person, you are recommended to
ask your model to stay as still as possible and to take the
second picture as quickly as you can. It is easier to take the
pictures if you use a tripod or appropriate base.
• As a guide, the camera should be moved about 1/40 of the
distance between the camera and the subject. For example, if
the subject is 3m away, the distance the camera should be
moved will be 3m÷40=7.5cm.
However, as the way people see three-dimensional images
differs from person to person, there is no need to be too concerned. Refer to the table below for a simple guide to how far
to move the camera.
Distance to subject
0.1 m
0.3 m
0.5 m
1m
3m
5m
Camera movement
0.5 cm
1 cm
1.5 cm
2.5 cm
7.5 cm
13 cm
Viewing 3D pictures by the parallel method and cross
method
As our eyes are positioned about 6 – 7 cm apart, there is a very
slight deviation between what we see with our right eye and
what we see with our left eye. The difference is processed by
our brain to produce a three-dimensional image. This principle is
applied to taking and viewing 3D pictures.
3D pictures can be viewed by the parallel method where the left
and right lines of vision are virtually parallel, as when looking at
a distant scene, or the cross method where the left and right
lines of vision are crossed, as when you cross your eyes. A certain amount of practice may be necessary to view 3D pictures
without using the viewer.
How to Assemble the 3D Image Viewer
Assemble the 3D image viewer supplied with the camera as
shown below.
Taking Pictures
65
How to view 3D pictures using the 3D image viewer
Print out the pictures so that they are about 11cm or 12cm wide
and place the divider of the 3D image viewer in the middle of
the two.
Taking Pictures
As the distance between the left and right eyes differs from per-
memo son to person, some people may have difficulty obtaining a
three-dimensional effect even when looking at prints that are the
same size. It may be especially difficult if the pictures are very
large or very small. Try different sizes until the right effect is
achieved.
Caution
66
• Never look at the sun through the 3D image viewer.
• Do not leave the 3D image viewer where it is exposed to
direct sunlight as this may lead to fire.
Example of a 3D picture
Taking Pictures
67
x
z
Continuous Shooting (Continuous Shooting Mode)
Pictures are taken continuously while the shutter release button is
pressed.
z
Taking Pictures
Press the four-way controller ()
button to display
on the LCD
monitor.
10/20/2003
11:19
x
Press the shutter release button.
Pictures will be taken continuously while the shutter release
button is pressed. Shooting stops when you take a finger off
from the shutter release button.
Playing Back Images
memo
Caution
68
198
☞ p.24
• You can continue shooting until the SD Memory Card/
MultiMediaCard is full.
• The interval will vary according to the [Recorded Pixels] and
[Quality Level] setting.
• The flash will not discharge in Continuous Shooting mode.
• Continuous shooting is not available for Movie Picture,
Panorama Assist and 3D Image modes.
x
z
Using the Self-Timer
The picture will be taken 10 seconds after the shutter release
button is pressed.
z
memo
Press the shutter release button.
The self-timer is engaged and the
self-timer lamp lights. The picture is
taken approximately 3 seconds after
the self-timer lamp starts to blink.
198
10/20/2003
11:19
Taking Pictures
x
Press the four-way controller () in Capture mode to display
on the LCD monitor.
• If you turn the LCD monitor on, the second count will be displayed.
• To cancel the self-timer, press the four-way controller or the
Menu button while the second count is displayed.
• In 3D Image mode, both the first and second images will be
taken with the self-timer engaged.
Playing Back Still Pictures ☞ p.24
Taking a Picture of Yourself ☞ p.54
69
z
Using the Remote Control Unit (optional)
You can take pictures using the remote control F (optional).
z
Taking Pictures
x
Press the four-way controller () in
Capture mode to display (
) on
the LCD monitor.
The self-timer lamp will blink and the
camera is ready to take pictures.
198
10/20/2003
11:19
Press the shutter release button on
the remote control unit.
The self-timer lamp will blink rapidly and the picture will be
taken after approximately three seconds.
Playing Back Images ☞ p.79
• The buttons on the camera can be used in the same way.
memo • Please ensure that the remote control unit is no more than 4
meters away from the front of the camera.
• To take a picture immediately after pressing the shutter release
button on the remote control unit, press the four-way controller
in step z to display
on the LCD monitor.
• You can use the remote control E (optional) to operate the
zoom.
Life of the Battery for the Remote Control Unit
70
A signal can be sent from the remote control unit to the camera
approximately 30,000 times. If the battery needs changing, contact your nearest Pentax customer service center. (A charge is
made for changing the battery.)
z
Using the Zoom
You can use the zoom to take pictures in Tele or Wide mode.
z
Press the Zoom button in Capture
mode.
198
When the digital zoom function is
disabled, you can take pictures at
up to 3 times magnification using
the optical zoom.
When the digital zoom is enabled,
you can further enlarge the subject
to a maximum magnification equivalent to 12 times.
Zoom bar
Digital
zoom range
Taking Pictures
: makes the subject larger
: makes the subject smaller
198
When digital zoom
is enabled
Saving the Zoom Position ☞ p.74
memo
You cannot use the optical zoom in Movie Picture mode.
71
Enabling the Digital Zoom Function
z
x
c
v
Caution
Press the MENU button in Capture mode.
The [
Rec.Mode] menu will be displayed.
Press the four-way controller ()
to select [Digital Zoom].
Use the four-way controller () to
select [On].
Press the OK button.
The camera is ready to take a picture.
Rec. Mode
Digital Zoom
Instant Review
Fast Fwd Movie
3D Mode
Memory
Sharpness
2/3
MENU
Exit
On
2sec
Off
Parallel Mode
OK
Ok
• When you turn the LCD monitor off, the digital zoom is
disabled even if the digital zoom function is set to On.
• If [Slim] has been selected for the digital filter, you cannot
use the digital zoom.
Taking Pictures
72
memo
• When you use the digital zoom function, the object should be
focused by the LCD monitor.
Saving the Digital Zoom Function Setting ☞ p.74
b
xcv
z
Taking Time-lapse Movie Pictures (Fast Fwd Movie)
This mode lets you take movie pictures at a delayed frame rate
so that when you play the movie back, the action appears
speeded up. This function is useful for recording a blooming
flowers, etc.
x
c
v
b
memo
Press the MENU button in Movie Picture mode.
The [
Rec.Mode] menu will be displayed.
Press the four-way controller () to select [Fast Fwd
Movie].
Use the four-way controller () to
choose [Off (×1)], [×2], [×5], [×10],
[×20], [×50] or [×100].
Press the OK button.
200
30sec
x2
Taking Pictures
z
10/20/2003
11:19
Press the shutter release button.
Shooting in Fast Forward Movie mode starts.
• Off (×1) is the normal setting for movie pictures (12 frames
per second). Each time ×2 or ×5 is selected, the number of
frames taken per second is reduced to 1/2 or 1/5.
• As movie pictures are normally played back at the rate of 12
frames per second, movies taken at ×2 are played back twice
as fast and movies taken at ×5 are played back five times as
fast.
• Sound cannot be recorded.
Movie Picture Mode ☞ p.56
73
Saving the Settings (Memory)
Saving the Menu Items (Memory)
You can choose whether you want the set values to be saved when the
camera is turned off. If you select
[On], the settings will be saved in
the status they were in immediately before the camera was turned off. If
you select
[Off], the settings will be reset to the defaults when the
camera is turned off.
Item
The flash mode setting on the
White Balance
The [White Balance] setting on the [Rec.Mode] menu
is saved.
Taking Pictures
The set EV compensation value is saved.
Digital Zoom
The [Digital Zoom] setting on the [Rec.Mode] menu is
saved.
AE Metering
The [AE Metering] setting on the [Rec.Mode] menu is
saved.
The [Sensitivity] setting on the [Rec.Mode] menu is
saved.
Sensitivity
Default Setting
button is saved.
EV Compensation
Focus Mode
The focus mode setting is saved.
Zoom Position
The zoom position setting is saved.
MF
The manual focus position is saved.
DISPLAY
The LCD monitor display mode is saved.
File #
The file number is saved. If a new SD Memory Card/
MultiMediaCard is inserted,the sequential file number
is assigned.
memo
74
Description
Flash
• Menu items not included in [Memory] will also be saved in the
settings selected on the menus for each function when the
camera is turned off.
• The zoom position setting in the digital zoom range will not
be saved even if [Zoom Position] is set to On in [Memory].
• [Memory] can be set separately in User mode and other
shooting modes.
z
x
Press the MENU button in Capture
mode.
Press the four-way controller
() to select [Memory].
c
Press the four-way controller ().
[Memory] menu will be displayed.
v
Use the four-way controller () to
select the item.
b
n
Rec. Mode
Digital Zoom
Instant Review
Fast Fwd Movie
3D Mode
Memory
Sharpness
2/3
Exit
OK
Ok
OK
Ok
Alarm
Flash
White Balance
EV Compensation
Digital Zoom
AE Metering
Sensitivity
Use the four-way controller () to
select
[On] or
[Off].
Press the OK button twice.
The camera is ready to take the
picture.
MENU
On
2sec
Off
Parallel Mode
1/2
MENU
Exit
Register Functions in User Mode
Functions registered in User mode
Items registered in User mode
Default setting
Page
Flash mode
Auto
p.39
Drive mode
Normal
p.68~70
Focus mode
Autofocus
p.36
Manual focus position
Infinity
p.38
Recorded pixels
2048×1536
p.41
Quality
p.42
White balance
AWB (auto)
p.43
Focusing area
Multiple
p.45
AE metering
(Multi segment)
Taking Pictures
Functions set with the Capture Mode on User will be registered
in User mode.
p.46
Sensitivity
Auto
p.47
Digital zoom
On
p.71
Instant review
1 sec
p.48
Mode memory
All On
p.74
Sharpness
Normal
p.49
Saturation
Normal
p.50
Contrast
Normal
p.51
Fn settings
EV compensation
p.120
75
Recording and Playback
Recording Sound (Voice Recorder Mode)
You can record sound. The recordable time is displayed on the
LCD monitor according to how much space is available on the
SD Memory Card/MultiMediaCard.
xc
zv
z Press the power switch for more than 2 seconds.
x
Recording and Playback
76
The power switch is illuminated by a red light.
The recordable time is displayed on the LCD monitor.
Remaining recordable time
Recording time
2
1
Press the shutter release button.
00 : 00 : 30
Recording starts. The self-timer lamp
and flash status lamp light during
00 : 00 : 00
recording.
c Press the shutter release button.
Recording stops. The remaining
recordable time is displayed.
Start
v To exit Voice Recorder mode, turn the camera off.
memo
• When you press the power switch, the lens extends, then
retracts immediately and the camera enters the Voice
Recorder mode.
• Sound is saved in WAVE monaural files.
• The microphone is located on the front of the camera. Aim
the camera to obtain the best sound.
• An index can be added by pressing the MENU button during
recording.
• When the shutter release button is pressed for more than 1
second after recording has started, recording continues for as
long as the button is held down and stops when the button is
released.
Playing Back Sound
You can play back the recording you made in Voice Recorder
Mode.
xcv
zb
z
Enter the Voice Recorder Mode and press the Playback
button.
Use the four-way controller () to
select the recording you want to
play back.
c
Press the four-way controller ().
Playback will start.
100-0012
00 : 00: 1 5
00 : 00: 2 8
10/20/2003
11:19
File recording time
The following operations can be performed during playback.
Four-way controller ()
Pauses playback
Press again to resume playback
If there are no recorded indexes:
Four-way controller ()
Rewinds 5 seconds
Four-way controller ()
Advances 5 seconds
If there are recorded indexes:
Four-way controller ()
Four-way controller ()
v
b
Zoom /
/
button (
Zoom /
/
button (
)
Recording and Playback
x
Plays back from the previous data
Plays back from the next data
Increases the volume
)
Reduces the volume
Press the four-way controller ().
Playback will end.
Press the Playback button.
The camera will switch to the Voice Recorder Mode.
77
Adding a Voice Memo
You can add a voice memo to a captured image.
zxc
z
Recording and Playback
78
x
c
memo
Caution
Enter the playback mode and
choose the image to which you
want to add a voice memo with the
four-way controller ().
The voice memo screen will be displayed on the LCD monitor while the
image is displayed.
100-0020
100-0019
10/20/2003
11:19
Press the OK button.
Recording starts. You can record for up to 30 seconds.
Press the OK button.
Recording stops.
• A voice memo cannot be added to an image which already
has a voice memo.
•
appears on the screen when a voice memo is added.
• A voice memo cannot be added to protected (
) images.
Playback/Erasing/Editing
Playing Back Images
x
z
c
Playing Back Still Pictures
See “Playing Back Images” (p.24), or “Playing Back Previous or
Next Images” (p.25).
Zoom Display
You can display images magnified up to a maximum of 4 times. A
guide to operation is displayed on the LCD monitor during magnification. (The magnification varies depending on the number of
recorded pixels.)
z
Four-way controller ()
: Moves the position to be magnified
Zoom /
/
button ( )
: Makes the image larger
Zoom /
/
button (
)
Display button
c
Caution
: Makes the image smaller
Playback/Erasing/Editing
Enter the Playback mode and
choose the image you want to
magnify with the four-way controller ().
x Press / on the Zoom/ /
button.
The image will be magnified (1× to 4×). If you keep pressing
( ), the magnification of image will be changed continuously.
The following operations can be performed while the magnified image is displayed.
: Turns the guide marks on/off
Press the MENU button.
Zoom playback will end.
• The movie pictures cannot be magnified.
• If the camera is turned on in Playback Only mode, pressing
the Playback button will not change the mode to Capture
mode. Turn the camera off and then turn it on again.
79
zxc
v
Playing Back Movie Pictures
You can play back Movie pictures. A guide to operation is displayed on the LCD monitor during playback. You can play back
the recording you made in Voice Recorder mode at the same
time.
z
x
Press the four-way controller ().
Playback will start.
100-0019
Playback/Erasing/Editing
10/20/2003
11:19
The following operations can be performed during playback.
Four-way controller ():
Four-way controller ():
Four-way controller ():
Display button:
Reverse playback
Forward playback
Pause
Changes the Display mode
The following operations can be performed while Pause is
engaged.
Four-way controller ():
Four-way controller ():
Four-way controller ():
Display button:
c
v
80
Enter the Playback mode and choose the movie picture
you want to play back with the four-way controller ().
Frame reverse
Frame forward
Releases the Pause function
Changes the Display mode
Press the four-way controller ().
Movie playback will end.
Press the Playback button.
The camera will return to Capture mode.
Displaying shooting information in Playback mode
Shooting information can be displayed on the LCD monitor.
Pressing the Display button switches the information displayed.
31 27
Display On
Displays shooting information.
q Folder name w File name
e Protect symbol
r Four-way controller operation guide
t Shooting date and time
y Battery symbol
u Card or Built-in memory icon
100-0020
100-0019
10/20/2003
11:19
6
5 4
➞
Histogram Display
9
2 3 4
Displays the brightness distribution across
1
the image. The horizontal axis shows
brightness (left end is darkest, and right
end is brightest), and the vertical axis
shows the pixels.
q Histogram
w Recorded pixels
e Quality
r White balance
1/125
t AE metering y Sensitivity
F2.6
u F number
i Shutter speed
87
o Card/Built-in memory
10/20/2003
11:19
6
5
➞
Display On
Playback/Erasing/Editing
Does not display shooting information.
AUTO
AUTO
➞
Display Off
100-0021
2592
81
xc
z
Nine-image Display
You can display nine images at the same time.
z
x
Playback/Erasing/Editing
82
c
Enter the Playback mode and choose an image with the
four-way controller ().
Press
/
on the Zoom button
/
.
Nine images will be displayed with
the selected image in the center.
Choose an image with the four-way
controller ().
When 10 or more images have been
Selected image
recorded, the previous 9 images will
be displayed if you press the four-way controller () while
an image on the left row is selected. If you press the fourway controller () while an image on the right row is selected, next 9 images will be displayed.
Press
/
on the Zoom button
/
.
The screen will return to single-image display of the selected image.
*In case of movies, a single-frame image will be displayed.
zcvb
x
Slideshow
You can play back all the images on the SD Memory Card/
MultiMediaCard continuously.
z
x
c
b
memo
Press the MENU button.
The [
Playback] menu will be
displayed.
Select [Slideshow] with the fourway controller ().
Playback
Copy image&Sound
Resize
Trimming
Alarm
Slideshow
1/1
MENU
Exit
Off
3sec
OK
Ok
Use the four-way controller ()
to change the playback interval.
Choose from the following: 3 sec, 5 sec, 10 sec, 15 sec,
20 sec, 25 sec, 30 sec.
Press the OK button.
Playback will start at the set interval.
• If you press the OK button during continuous playback, the
slideshow will stop.
• The slideshow will continue until you press any button.
• Movie pictures and pictures with a voice memo will be played
through to the end before the next picture is played back,
regardless of the set playback interval.
• Recordings made in Voice Recorder mode are not played
back.
Playback/Erasing/Editing
v
Enter the Playback mode and choose the image with
which to start the slideshow with the four-way controller
().
83
Erasing Images
x
zcv
Erasing a Single Image or Voice Memo
z
x
c
Playback/Erasing/Editing
84
v
Enter the Playback mode and choose the image or voice
memo you want to erase with the four-way controller
().
Press the
button.
The Delete screen will be displayed.
Select [Delete] with the four-way
controller ().
100-0020
Delete
Cancel
MENU
Exit
All Images Sound
OK
Ok
Press the OK button.
• You can also delete images from Instant Review (p.48).
) images (with the
symbol).
• If [Quick Delete] is set to On in the [
Set-up] menu, Step c
can be omitted.
memo • You cannot erase protected (
Erasing a Voice Memo only
If an image has a voice memo, you can erase the voice memo
without erasing the image.
z
x
c
v
Enter the Playback mode and choose the image with the
voice memo that you want to erase with the four-way
controller ().
Press the
button.
The Delete screen will be displayed.
100-0020
Select [Sound Delete] with the
four-way controller ().
Press the OK button.
Sound Delete
Delete
Cancel
MENU
Exit
All Images
Ima es
OK
Ok
Select [Delete] in step c above to erase both the image and
memo the voice memo.
Playback/Erasing/Editing
85
z
xc
Erasing All Images
You can erase all the images and sound at once.
• Once erased, images cannot be restored.
• Protected images/sound cannot be erased.
Caution
z
x
Playback/Erasing/Editing
86
c
Enter the Playback mode and
press the
button twice.
The Delete All screen will be
displayed.
Select [Delete All] with the fourway controller ().
Press the OK button.
100-0020
Delete all images &
sounds
Delete All
Cancel
MENU
Exit
OK
Ok
x
zcv
Protecting Images/sound from Deletion (Protect)
You can protect images/sound from being accidentally erased.
z
x
c
v
•
Enter the Playback mode and choose the image/sound
you want to protect with the four-way controller ().
Press the
button.
100-0020
The Protect screen will be displayed.
Select [Protect] with the four-way
Protect
Unprotect
controller ().
MENU Exit
All Images
a es & Sounds OK Ok
Press the OK button.
Protecting All Images
You can protect all the images.
z
x
c
v
Enter the Playback mode.
Press the
button twice.
The Protect all screen will be displayed.
Select [Protect] with the four-way controller ().
Press the OK button.
Playback/Erasing/Editing
Select [Unprotect] in step c to release the Protect setting.
symbol is displayed
when
All Images
the image/sound is played back.
memo • If the image is protected, the
Select [Unprotect] in step c to cancel the Protect setting on all
memo the images.
Caution
Even protected images/sound will be erased by formatting
the SD Memory Card/MultiMediaCard.
87
Viewing Images on a TV
By using the AV cable, you can capture and play back images
on a TV or other equipment with a video IN jack. Make sure that
both the TV and the camera are turned off before connecting
the cable.
z
x
c
Playback/Erasing/Editing
88
Open the terminal cover and connect the AV cable.
Connect the other end of the AV cable to the image input
terminal and sound input terminal on the TV.
Turn the TV and camera on.
Changing the Video Output Format ☞ p.117
If you intend to use the camera for a long time, use of the AC
memo adapter (optional) is recommended. Refer to the operating manual for the TV or equipment to which the camera is connected.
Setting the Printing Service (DPOF)
You can print the images on the SD Memory Card/MultiMediaCard
using a DPOF (Digital Print Order Format) compatible printer or at a
printing service.
zxcvb
Printing Single Image
Set the following items for each image.
Copies
Set the number of prints up to a maximum of 99.
Date
Specify whether you want the date imprinted on the print or
not.
x
Enter the Playback mode, use the four-way controller
() to choose the image for which you want to make
DPOF settings.
Press the four-way controller ()
button.
The DPOF menu will be displayed.
100-0020
Copies
Date
MENU
Exit
DISP
1
All Images
Ima es OK Ok
Playback/Erasing/Editing
z
89
c
Use the four-way controller () to
select the number of prints, then
press the four-way controller ().
The frame will move to [Date].
v
Use the four-way controller () to
select whether to insert the date or
not.
b
memo
Caution
Playback/Erasing/Editing
90
100-0020
Copies
Date
MENU
Exit
DISP
3
All Images
Ima es OK Ok
(On): The date will be imprinted
(Off): The date will not be imprinted
Press the OK button.
Prints can be made according to the settings.
• If DPOF settings have already been made for an image, the
previously set number of prints and On/Off date setting will
be displayed.
• To cancel DPOF settings, set the number of prints to 0 and
press the OK button.
• You cannot set the printing service for movie pictures or
sound-only files.
• Depending on the printer or printing equipment at the
photo processing lab., the date may not be imprinted on
the pictures even if the DPOF setting was made.
• DPOF settings cannot be made on the images saved in
the Built-in memory. Copy them to the SD Memory Card/
MultiMediaCard (p.95) and make DPOF settings.
zcvbn
x
Printing All Images
z
x
c
v
b
Press the Display button.
Use the four-way controller () to
select the number of prints.
You can print up to 99 copies.
Press the four-way controller ().
The frame will move to [Date].
100-0020
DPOF settings for all images
Copies
Date
MENU
Exit
Use the four-way controller () to select
[Off].
(On): The date will be printed.
(Off): The date will not be printed.
1
OK
Ok
[On] or
Press the OK button.
Prints can be made according to the settings.
• The setting for a single image will be cancelled.
memo • When you specify the number of prints in the DPOF setting,
the number applies to all the images. Before printing, check
that the number is correct.
• The setting is not possible for movie pictures.
Playback/Erasing/Editing
n
Enter the Playback mode and press the four-way controller ().
91
Editing Images
Four-way controller
(OK button in the center)
Menu button
Changing the Image Size
By changing the size and quality of a selected image, you can
make the file smaller than the original. After changing the size,
the image can be saved as a new image or written over the
original image.
z
x
Playback/Erasing/Editing
92
c
v
Press the MENU button.
Press the four-way controller ().
The [
Playback] menu will be displayed.
Press the four-way controller () to select [Resize].
Press the four-way controller ().
The Resize screen will be displayed.
100-0020
MENU
b
Exit
OK
Ok
Use the four-way controller () to choose the image
you want to resize.
n
Press the OK button.
100-0020
Select resolution and
quality
Recorded Pixels
Quality Level
MENU
m
,
.
⁄0
⁄1
⁄2
640×480
Exit
OK
Ok
Press the four-way controller () to select [Recorded
pixels].
Press the four-way controller ().
The select frame moves to [Quality Level].
Press the four-way controller () to select [Quality
Level].
Press the OK button.
Press the four-way controller () to select [Overwrite]
or [Save as].
Press the OK button.
The image will be resized.
• Movie pictures cannot be resized.
memo • You cannot select a larger size than that of the original
image.
Playback/Erasing/Editing
93
Trimming Images
You can trim part of a picture and save it as a separate image.
z
x
c
v
b
n
Press the MENU button.
Press the four-way controller ().
The [
Playback] menu will be displayed.
Press the four-way controller () to select [Trimming].
Press the four-way controller ().
The image that can be trimmed.
Choose the image you want to trim
with the four-way controller ().
Press the OK button.
The trimming screen will be displayed.
MENU
m
Exit
Size
Siz
OK
Ok
Trim the image.
Operations available on the Trimming screen.
Changes the size of the image
Zoom/ /
button:
Four-way controller (): Moves the trimming position
up, down, right and left
MENU button:
Returns to the screen for
selecting an image to trim
,
Playback/Erasing/Editing
94
memo
Press the OK button.
The trimmed image will be saved as a separate image with
same quality level and recorded pixels of the original image.
• Movie pictures cannot be trimmed.
Copying Files
You can copy files from the Built-in memory to the SD Memory Card/
MultiMediaCard and vice versa.
When files are copied from the Built-in memory to the card, all
the files are copied at once. When files are copied from the card
to the Built-in memory, the files are checked one at a time
before being copied.
z Press the MENU button.
x Press the four-way controller ().
The [
Playback] menu is displayed.
c Press the four-way controller () to select [Copy Image &
Sound].
v Press the four-way controller ().
The File Copy screen is displayed. Choose the copying
method you want to use.
To copy from the Built-in memory to the SD Memory Card/
MultiMediaCard
b
Select the copying method.
Select
and press the
OK button.
All the files will be copied to the
SD Memory Card/MultiMediaCard.
Copy image & sound
SD
SD
Cancel
MENU
Exit
OK
Ok
b
Select the copying method.
100-0020
Select
and press the
Copy This Image
Copy
Ima e & Sound
OK button.
Use the four-way controller () to
select the file you want to copy.
OK Ok
MENU Exit
Press the OK button.
The selected file will be copied to the Built-in memory.
SD
n
m
memo
• If the image has a voice memo attached, the sound file will
be copied at the same time as the image.
• When a file is copied from the SD Memory Card/MultiMediaCard
to the Built-in memory, it is assigned a new file name.
• Be sure to turn the camera off before inserting or removing
the SD Memory Card/MultiMediaCard.
Playback/Erasing/Editing
To copy from the SD Memory Card/MultiMediaCard to the
Built-in memory
95
Viewing Images with your PC
By using the provided USB cable (I-USB7) or card reader and
image-browser software, you can transfer images recorded with
the camera to your PC and edit them or print them out.
This section explains how to view images on your PC using the
provided software (S-SW8).
About the included software
The included CD-ROM (S-SW8) contains the following software:
- USB driver
- Image viewing software (ACDSee™)
- Panorama software (ACD Photostitcher)
System environment
OS:
Windows 98/98 SE/2000/Me
Windows XP Home Edition/Professional
CPU:
Pentium or later recommended
Memory: 64MB or more
Hard disk space: 15MB or more
Standard equipped USB port
Playback/Erasing/Editing
96
To view movie pictures on your PC, Direct X 8.0 or later and
Media Player pre-installed on system, or QuickTime 3.0 or later
are required. For Windows Me/XP, Media Player pre-installed on
system, QuickTime 3.0 or later is required.
Caution
• Not compatible with Windows 95/NT.
• When you connect the camera to your PC, you are recommended to use the AC adapter D-AC8. If the battery
power runs out while image data is being transferred, the
data may be lost.
Installing the software
The procedures for installing the necessary software are
explained.
• If you are using Windows 2000 or Windows XP
(Professional),
Please Login as an administrator user before starting
installation.
Refer to your PC’s operating manual for instructions on
how to login.
Caution
z
x
Turn on your computer.
Insert the CD-ROM (S-SW8) into your CD-ROM drive.
The PENTAX Software Installer screen will appear.
If the PENTAX Software Installer screen is not displayed
Follow the procedure below to display the screen.
1) Double click the [My Computer] icon on the desktop.
2) Double click the [CD-ROM Drive (S-SW8)] icon.
3) Double click the [Setup.exe] icon.
c
Installing the USB Driver
v
Click the [USB Driver] on
the Software Installer
screen.
The InstallShield Wizard
screen will appear.
Follow the instruction on the
screen.
Complete InstallShield
Wizard screen will appear.
Playback/Erasing/Editing
Click your applicable language.
You can choose the language
from the following: English,
French, German, Spanish,
Italian and Japanese.
97
b
n
m
,
Playback/Erasing/Editing
98
memo
Click [Next] and then click [Finish].
Reboot your computer after the screen closes.
Turn your camera off and plug the USB cable into your
camera and into an available USB port on your computer.
Turn your camera on.
Your computer will automatically detect the camera as new
hardware and window will display a notification confirming
[Hardware Found : PENTAX OPTIO S] (Windows XP) or
[Search for the best driver for your device (Recommended)]
(Windows 98/98SE/ME/2000) in the task bar recognized
area to begin the installation.
Double click [My Computer] on the desktop.
When the installation is completed, your camera can then
be found in the [My Computer] window as [Removable
Disk].
Make sure that “ Removable Disk ” is displayed in the [My
computer] window.
• In the case of Windows XP, if the SD Memory Card/
MultiMediaCard has a volume label attached, the content of
the volume label will be displayed instead of [Removable
Disk]. If the SD Memory Card/MultiMediaCard is new and has
not been formatted, the manufacturer and capacity of the
card may be displayed.
Installing the ACDSee™
When installing the ACDSee™, recorded images can be viewed
and edited on your computer.
z
x
Turn on your computer.
Insert the CD-ROM (S-SW8) into your CD-ROM drive.
The PENTAX Software Installer screen will appear.
If the PENTAX Software Installer screen is not displayed
Follow the procedure below to display the screen.
1) Double click the [My Computer] icon on the desktop.
2) Double click the [CD-ROM Drive (S-SW8)] icon.
3) Double click the [Setup.exe] icon.
c
v
Double click your applicable language.
You can choose the language from the following: English,
French, German, Spanish, Italian and Japanese.
Click the [USB Driver].
The Setup screen will appear. Follow the on-screen guidance and enter the registration information. Reboot your PC
after installation finish.
Installing the ACD Photostitcher
If you have installed ACDSee™ and ACD Photostitcher in your
computer, you can join the images you have taken in Panorama
assist mode.
Make sure that the ACDSee™ has been installed.
Turn on your computer.
Insert the CD-ROM (S-SW8) into your CD-ROM drive.
The PENTAX Software Installer screen will appear.
If the PENTAX Software Installer screen is not displayed
Follow the procedure below to display the screen.
1) Double click the [My Computer] icon on the desktop.
2) Double click the [CD-ROM Drive (S-SW8)] icon.
3) Double click the [Setup.exe] icon.
c
v
Double click your applicable language.
You can choose the language from the following: English,
French, German, Spanish, Italian and Japanese.
Click the [ACD Photostitcher].
The Setup screen will appear. Follow the on-screen guidance and enter the registration information.
The screen will return to PENTAX Software Installer. Click
the [Exit] to finish.
Playback/Erasing/Editing
z
x
99
Displaying and copying images using ACDSee™
z
x
c
v
Playback/Erasing/Editing
b
n
100
Turn your computer on.
Make sure the camera is turned off and connect it to
your computer with the USB cable.
Make sure that there is an SD Memory Card/
MultiMediaCard in the camera.
Turn your camera on.
ACDSee starts up automatically and the list of images is
displayed. Go to Step b.
If ACDSee fails to start
up automatically, double-click the [ACDSee]
icon on the desktop.
Your camera can be
found in the [My
Computer] window as
[Removable Disk].
Camera images can be
found in [My Computer]
[Removable Disk (or the name on the volume label on
the SD Memory Card/MultiMediaCard, if there is one)] [DCIM] [XXXPENTX]. (XXX is a 3-digit number.)
A list of the images will be displayed.
Select the image you want to view from the list.
Double-click the selected image to enlarge it to full-screen
display.
Copy the image to your computer.
Select an image from the list and copy it to the desired folder in your computer. Refer to the operating manual for your
computer for copying instructions.
You can also copy images using Internet Explorer for Windows.
memo
• If you are using Windows XP and there is a volume label on
the SD Memory Card/MultiMediaCard, the name on the volume label will be displayed instead of [Removable Disk]. If the
card is unformatted, the manufacturer and type of card may
be displayed.
Joining Panorama Images Using ACD Photostitcher
Once you have installed ACDSee™ and PhotoStitcher™ in your
computer, you can join the images you have taken in Panorama
Assist mode.
The folder names and image names displayed on the screen for
explanatory purposes may vary depending on your operating
system.
z
x
Start up ACDSee™.
See p.102 for instructions on how to start up ACDSee™.
Select the images you want to join from the list of
images.
To select more than one image at once, click on the images
while pressing [Ctrl] on the keyboard.
After selecting the images, click the [ACD photostitcher] button on the tool bar.
If no images have been selected, the [ACD photostitcher]
button is disabled.
Select the images
Playback/Erasing/Editing
Click the [ACD photostitcher] button
101
c
Adjust the position of the images.
[ACD photostitcher] starts up and the selected images are
displayed in panorama format.
If you move the mouse pointer onto an image, the pointer
changes to a
symbol. Adjust the position of the images
by pressing the left mouse button and moving the images
one by one to the desired position.
When you have finished correcting the position, click the
[STITCH] button.
Click the [STITCH]
button
Adjust the position
while pressing the left
mouse button
v
Playback/Erasing/Editing
102
Select the type of panorama picture you want.
There are two types of panorama picture: [Big Plane] and
[Cylinder]. As the former type is used in this explanation,
click the [Big Plane] button.
A dialog box will appear. Click [OK].
Click the [Big Plane]
b
Trim the picture.
If you move the mouse pointer onto the dotted line around
the picture, the pointer changes to a symbol. Trim the
picture by pressing the left mouse button and moving the
dotted line.
When you have finished trimming, click the [Trimming] button.
Click the [Trimming]
button.
Trim the picture.
n
Save the picture.
When you are satisfied with the trimmed picture, click the
[Save] button to save the picture.
To cancel trimming, click the [Cancel Trimming] button.
After saving the picture, if you have finished creating
panorama pictures, exit [ACD photostitcher] and [ACDSee].
Click the [Save] button.
Playback/Erasing/Editing
[Cancel Trimming] button
103
Disconnecting your camera from your PC
Disconnecting the camera from your PC (Windows 2000/Me)
z
x
Double click the [Unplug or
eject hardware] icon in the
task bar recognized area.
The [Unplug or eject hardware] screen will appear.
Make sure [PENTAX USB
DISK Device] is selected
and click [Stop].
[Stop Hardware Device]
screen will appear.
PENTAX USB DISK Device at PENTAX OPTIO S
c
Playback/Erasing/Editing
104
v
b
Make sure [PENTAX USB
DISK Device] is selected
and click [OK].
A message will appear.
Click [OK].
Turn off the camera and disconnect the USB cable from
your computer and camera.
Disconnecting your camera from your PC (Windows XP)
z
x
Click the [Safely Remove
Hardware] icon in the task
bar recognized area.
Make sure [PENTAX USB
DISK Device] is selected
and click [Stop].
PENTAX USB DISK Device at PENTAX OPTIO S
c
v
Make sure [PENTAX USB
DISK Device] is selected
and click [OK].
Disconnecting the camera from your PC (Windows 98)
For Windows 98, there is no Hot Plug icon. To disconnect the
camera, turn the camera off and remove the USB cable.
Playback/Erasing/Editing
A message confirming
removal of the hardware will
appear.
Turn off the camera and disconnect the USB cable from
your computer and camera.
105
Viewing Images with your Macintosh
By using the provided USB cable (I-USB7) or card reader and
image-browser software, you can transfer images recorded with
the camera to your Macintosh and edit them or print them out.
This section explains how to view images on your Macintosh
using the provided software (S-SW8).
About the included software
The included CD-ROM (S-SW8) contains the following software:
• USB driver
• Image viewing software (ACDSee™)
System environment
OS:
Mac OS 8.6 or later (QuickTime 4.0 or later required)
CPU:
Power PC 266MHz or higher
Memory: 8MB or more
Hard disk space: 6MB or more
Standard equipped USB port
Caution
Playback/Erasing/Editing
106
• When you connect the camera to your Macintosh, you
are recommended to use the AC adapter D-AC8. If the
battery power runs out while image data is being transferred, the data may be lost.
Installing the software
z
x
c
v
b
n
Turn on your Macintosh.
Insert the CD-ROM (S-SW8)
into your Mac’s CD-ROM
drive.
Double click the [CD-ROM
(S-SW8)].
The title screen will appear
on your desktop.
Double Click the [Master Installer].
Double-click the [Master Installer] alias icon.
The PENTAX Software Installer screen will appear.
Click your applicable language.
You can choose the language from the following:
English, French, German,
Spanish, Italian and
Japanese.
Installing the USB driver (Mac OS 8.6 only)
memo
Click [USB Driver].
The USB driver will be installed.
When installation is completed, reboot your Macintosh.
• The USB driver does not need to be installed on Mac OS 9.0
and later versions.
Installing ACDSee™
When you install ACDSee™, you can edit and manage
image files on your Macintosh.
m
Playback/Erasing/Editing
m
Click [ACDSee™].
The Setup screen will appear. Follow the on-screen guidance and enter the registration information.
When installation is completed, reboot your Macintosh.
107
Displaying and copying images using ACDSee™
z
x
c
v
Playback/Erasing/Editing
b
n
m
,
108
Turn your Macintosh on.
Make sure the camera is turned off and connect it to
your Macintosh with the USB cable.
Make sure that there is an SD Memory Card/
MultiMediaCard in the camera.
Turn your camera on.
Your camera can be found on the desktop as
[untitled]. You can change the folder name.
Click the [ACDSee™] folder on the hard
drive.
Double-click the [ACDSee™] program icon.
Open the camera folder.
Camera images can be found in [untitled (or the name on
the volume label on the SD Memory Card/MultiMediaCard,
if there is one)] [DCIM] [XXXPENTX]. (XXX is a 3-digit
number.)
Select the image you want to view from the list.
Double-click the selected image to enlarge it to full-screen
display.
Copy the image to your Macintosh.
Refer to the operating manual for your Macintosh for
instructions on copying or moving files.
Before editing an image, copy it to your Macintosh first.
memo
• If there is a volume label on the SD Memory Card/
MultiMediaCard, the name on the volume label will be displayed instead of [untitled]. If the card is unformatted, the
manufacturer and type of card may be displayed.
Disconnecting the camera from your Macintosh
z
x
Drag the [untitled (or the name on the volume label on
the SD Memory Card/MultiMediaCard, if there is one]
folder on the desktop to Trash.
Unplug the USB cable from your Macintosh and camera.
Playback/Erasing/Editing
109
Settings
Camera Settings
How to recall the [
Set-up] menu
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
Four-way controller
(OK button in the
center)
1/3
MENU
2048 1556
AWB
Multiple
Exit
Auto
OK
Ok
Menu button
Formatting a SD Memory Card/MultiMediaCard and the Built-in memory
Formatting will delete all the data on the SD Memory Card/
MultiMediaCard if you are using a card, and all the data in the
Built-in memory if there is no card inserted.
• Do not remove the SD Memory Card/MultiMediaCard
while the card is being formatted. The card may be damaged and become unusable.
• Formatting will delete protected data too.
Caution
z
x
Settings
110
c
v
Select [Format] on the [
Set-up] menu.
Press the four-way controller ().
The Format screen will be displayed.
Select [Format] with the four-way controller ().
Press the OK button.
Formatting will start. When formatting is completed,
the camera is ready to capture images.
Set-up
Format
Sound
Start-up Screen
Date Style
Date Adjust
World Time
1/3
MENU
Exit
On
On
mm/dd/yy
1/ 1/2003
Off
OK
Ok
Changing the Sound Settings
You can change the volume of the start-up sound, shutter sound
and button sounds. You can also change the type of each sound.
Changing the volume
z
x
c
v
b
Select [Sound] on the [
Set-up] menu.
Press the four-way controller ().
The Sound screen will be displayed.
Select [Volume] with the four-way
controller ().
Use the four-way controller () to
change the volume.
Sound
Volume
Start-up Sound
Shutter Sound
Operation Sound
1
1
1
Exit
OK
MENU
Ok
Press the OK button twice.
The camera is ready to capture or play back images.
Changing the type of start-up, shutter or operation sound
c
v
b
Select [Sound] on the [
Set-up] menu.
Press the four-way controller ().
The Volume screen will be displayed.
Press the four-way controller () to select [Start-up
Sound] and choose [1], [2], [3] or [Off] with the four-way
controller ().
Settings
z
x
Change the [Shutter sound] and [Operation Sound] in
the same way.
Press the OK button twice.
The camera is ready to capture or play back images.
111
How to recall [
Set-up] menu
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
Four-way controller
(OK button in the
center)
Menu button
1/3
MENU
2048 1556
AWB
Multiple
Auto
Exit
OK
Ok
Changing the Start-up Screen
You can display an image recorded with the camera as the
welcome screen when the camera is turned on.
z
x
c
v
b
n
m
Settings
112
memo
Select [Start-up Screen] on the [
Set-up] menu.
Press the four-way controller ().
Press the Display button.
Use the four-way controller () to choose the image
you want to display as the start-up screen.
Press the OK button.
Use the four-way controller () to select
[Off].
[On] or
Press the OK button twice.
The camera is ready to take or play back images.
Once the welcome screen has been set, it will not be
erased even if the original image is deleted or the
SD Memory Card/MultiMediaCard is formatted.
Set-up
Format
Sound
Start-up Screen
Date Style
Date Adjust
World Time
1/3
MENU
On
On
mm/dd/yy
1/ 1/2003
Off
Exit
OK
Ok
Setting the Date Style
You can set the style in which the date is displayed on the camera. Choose [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd].
z
x
c
memo
Select [Date Style] on the [
Set-up] menu.
Use the four-way controller () to change the date
style.
Press the OK button.
The camera is ready to capture or play back images with
the selected date style.
The style in which the time is displayed is set by [Date Adjust].
Settings
113
How to recall the [
Set-up] menu
Rec. Mode
Four-way controller
(OK button in the
center)
Menu button
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
MENU
2048 1556
AWB
Multiple
Exit
Auto
OK
Ok
Changing the Date/Time
You can change the initial date and time settings.
z
x
Select [Date Adjust] on the [
Set-up] menu.
Press the four-way controller ().
The date screen will be displayed.
See “Setting the Date and Time” (p.20) for the setting procedure.
Setting the World Time
Settings
The city and time selected in “Initial Settings” (p.18) serve as the
Home Time setting.
You can display the time in a city other than the Home Time city
(World Time) when shooting or playing back.
z
x
Select [World Time] on the [
Set-up] menu.
Press the four-way controller ().
The World Time screen will be displayed.
World Time
TYO
MENU
114
Exit
04:18
17:18
OK
Ok
Set-up
Format
Sound
Start-up Screen
Date Style
Date Adjust
World Time
1/3
c
Switch [
MENU
On
On
mm/dd/yy
1/ 1/2003
Off
Exit
] and [
OK
Ok
] with the four-way controller ().
: The time in the country selected in World Time will be displayed.
: The time in the country selected in Home Time will be displayed.
v
Press the four-way controller ().
If New York is selected as the world time city, then the
cross-shapes line is located in New York on the world map,
and then
indicates the current time in New York (NYC).
b
Use the four-way controller () to select the World
Time city and press the four-way controller ().
on the LCD monitor will move to (
).
n
memo
Press the OK button twice.
The camera is ready to capture or play back images with
the time in the selected city.
Settings
m
Select [DST] On (
) or Off (
) with the four-way controller () and press the four-way controller ().
The frame will move to [ ] (home time city).
Use the four-way controller () to change the Home Time
city and DST setting.
See p.124 for the list of cities and code names.
115
How to recall the [
Set-up] menu
Rec. Mode
Four-way controller
(OK button in the
center)
Menu button
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
MENU
Exit
2048 1556
AWB
Multiple
Auto
OK
Ok
Changing the Display Language
You can change the language in which the menus, error messages, etc. are displayed.
z
x
c
Settings
116
Select [Language] on the [
Set-up] menu.
Use the four-way controller () to select the language.
Press the OK button.
The camera is ready to take or play back images.
Set-up
Format
Sound
Start-up Screen
Date Style
Date Adjust
World Time
1/3
MENU
Exit
On
On
mm/dd/yy
1/ 1/2003
Off
OK
Ok
Changing the Video Output Format
You can select the output format (NTSC or PAL) for taking or
playing back images on a TV monitor.
z
x
c
Select [Video Out] on the [
Set-up] menu.
Use the four-way controller () to change the video
output format.
Press the OK button.
The camera is ready to take or play back images.
Settings
117
How to recall the [
Set-up] menu
Rec. Mode
Four-way controller
(OK button in the
center)
Menu button
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
1/3
MENU
2048 1556
AWB
Multiple
Auto
Exit
OK
Ok
Sleep Timeout
You can set the LCD monitor to turn off automatically when no
operation is performed for a fixed time.
z
x
c
memo
Select [Sleep Timeout] on the [
Set-up] menu.
Use the four-way controller () to select [30sec],
[1min], [2min] or [off].
Press the OK button.
The camera is ready to take or play back images.
• This function will not work in Playback mode or when the USB
cable is connected.
Setting Auto Power Off
You can set the camera to turn off automatically when no operation is performed for a fixed time.
Settings
z
x
c
Select [Auto Power Off] on the [
Set-up] menu.
Use the four-way controller () to select [3 min],
[5 min] or [off].
Press the OK button.
The camera is ready to capture or play back images.
• The menu screen turns off 1 minute after the last operation.
memo • The Auto Power Off function will not work when the USB
cable is connected.
118
Set-up
Format
Sound
Start-up Screen
Date Style
Date Adjust
World Time
1/3
MENU
Exit
On
On
mm/dd/yy
1/ 1/2003
Off
OK
Ok
Setting the Quick Delete Function
When the Quick Delete function is set to On, the Delete screen
will be displayed when [Delete] or [Delete All] is selected.
z
x
c
Select [Quick Delete] on the [
Set-up] menu.
Use the four-way controller () to select [On] or [Off]
Press the OK button.
The camera is ready to capture or play back images.
Setting the Quick Zoom Function
When the Quick Zoom function is set to On, images can be displayed at maximum magnification simply by pressing the Zoom
button once during zoom playback.
Select [Quick Zoom] on the [
Set-up] menu.
Use the four-way controller to select [On] or [Off]
Press the OK button.
The camera is ready to capture or play back images.
Settings
z
x
c
119
How to recall the [
Set-up] menu
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
Four-way controller
(OK button in the
center)
Menu button
1/3
MENU
Exit
2048 1556
AWB
Multiple
Auto
OK
Ok
Registering Functions
You can register the functions you use most frequently on the
four-way controller (). The functions can then be set directly
by pressing the four-way controller (), without displaying the
[Rec. Mode] menu.
Registering a function
z
x
c
memo
Select [Fn Setting] on the [
Set-up] menu.
Use the four-way controller () to choose the function
you want to register.
Press the OK button.
The camera is ready to capture or play back images.
Settings
• Only one function can be registered on each key of the fourway controller ().
• You can choose from the following 9 functions:
EV Compensation, Recorded Pixels, Quality Level, White
Balance, Focusing Area, AE Metering, Instant Review and
Fast Fwd Movie.
Retrieving a function
z
120
Press the four-way controller ().
The function will be recalled.
Set-up
Format
Sound
Start-up Screen
Date Style
Date Adjust
World Time
1/3
MENU
Exit
On
On
mm/dd/yy
1/ 1/2003
Off
OK
Ok
Resetting to Default Settings (Reset)
You can reset all the settings other than the date and time, language, world time and alarm.
z
x
c
v
Select [Reset] on the [
Set-up] menu.
Press the four-way controller button ().
The Reset screen will be displayed.
Use the four-way controller () to select [Reset].
Press the OK button.
The camera is ready to capture or play back images.
Settings
121
Setting the Alarm
You can set the alarm to ring at a specified time and display a
selected image.
Four-way controller
(OK button in the center)
Menu button
Checking the Alarm
z
x
c
v
Press the MENU button.
Press the four-way controller ().
The [
Playback] menu will be displayed.
Press the four-way controller () to select [Alarm].
Press the four-way controller ().
The list of alarms will be displayed.
Active alarms are indicated by
.
Alarm
1
Once
5:30
2
Everyday
7:30
3
Off
0:00
Settings
MENU
b
Exit
OK
Setting the Alarm
z
x
c
122
Ok
Press the OK button twice.
If any alarms are enabled, the camera will be turned off and
the alarms will be set.
Press the MENU button.
Press the four-way controller ().
The [
Playback] menu will be displayed.
Press the four-way controller () to select [Alarm].
v
b
Press the four-way controller ().
The list of alarms will be displayed.
Alarm
Press the four-way controller ()
to select alarm 1-3.
1
Once
5:30
2
Everyday
7:30
3
Off
0:00
MENU
n
m
,
.
⁄0
Press the four-way controller ().
The screen for setting the alarm
mode and time will be displayed.
Four-way controller () : Selects the
item.
Four-way controller () : Changes the
setting.
Exit
OK
Ok
Alarm
1
MENU
Exit
Once
DISP
Image
5:30
OK
Ok
Press the Display button.
Press the four-way controller () to select the image to
be displayed when the alarm rings.
Press the OK button.
Press the OK button 3 times.
The camera will turn off.
Turning the Alarm Off
When the camera is turned off and the set time is reached, the
alarm will ring for one minute .
The camera will turn off automatically when the alarm has finished ringing.
Caution
• To stop the alarm ringing, press any button.
Settings
memo
The alarm will not ring when the camera is turned on.
123
Appendix
List of City Names
Refer to following list of city and code names for setting the world time.
Appendix
124
Code
PPG
HNL
ANC
YVR
SFO
LAX
YYC
DEN
MEX
CHI
MIA
YTO
NYC
SCL
CCS
YHZ
BUE
SAO
RIO
MAD
LON
PAR
MIL
ROM
BER
JNB
IST
CAI
JRS
MOW
JED
City names
Pagopago
Honolulu
Anchorage
Vancouver
San Francisco
Los Angeles
Calgary
Denver
Mexico City
Chicago
Miami
Toronto
New York
San Diego
Caracas
Halifax
Buenos Aires
Sao Paulo
Rio de Janeiro
Madrid
London
Paris
Milan
Rome
Berlin
Johannesburg
Istanbul
Cairo
Jerusalem
Moscow
Jeddah
Code
THR
DXB
KHL
KBL
MLE
DEL
CMB
KTM
DAC
RGN
BKK
KUL
VTE
SIN
PNH
SGN
JKT
HKG
PER
BJS
SHA
MNL
TPE
SEL
ADL
TYO
GUM
SYD
NOU
WLG
AKL
City names
Tehran
Dubai
Karachi
Kabul
Male
Delhi
Colombo
Kathmandu
Dacca
Rangoon
Bangkok
Kuala Lumpur
Vientiane
Singapore
Phnom Penh
Ho chi Minh
Jakarta
Hong Kong
Perth
Beijing
Shanghai
Manila
Taipei
Seoul
Adelaide
Tokyo
Guam
Sydney
Noumea
Wellington
Auckland
Optional Accessories
A number of dedicated accessories are available for this camera.
AC adapter D-AC8
USB Cable I-USB7
AV Cable I-AVC7
Camera Case O-CC8
Strap O-ST5
3D image viewer O-3DV1
Remote control E
Remote control F
Rechargeable lithium-ion battery D-LI8
Battery charger D-BC8
Appendix
125
Messages
Messages such as the following may be displayed on the LCD monitor
during camera operation.
Appendix
126
Memory Card full
Built-in Memory Full
The SD Memory Card/MultiMediaCard or
the Built-in memory is full and no more
images can be saved. Insert a new
SD Memory Card/MultiMediaCard or delete.
(p.16, p.84)
Change the quality/size and try again. (p.92,
p.94)
No image & sound
There are no images or sound on the
SD Memory Card/MultiMediaCard or in the
Built-in memory.
Camera can not display
this image & sound.
You are trying to play back an image in a
format not supported by this camera. You
may be able to display it on another brand
of camera or PC.
Battery depleted.
The battery is exhausted. Recharge the
battery or replace with charged battery.
(p.12)
Memory card error.
Shooting and playback are impossible due
to a problem with SD Memory Card/
MultiMediaCard.
Try displaying on a PC.
This card is not formatted.
The SD Memory Card/MultiMediaCard you
have inserted is unformatted or has been
formatted on a PC or other device and is
not compatible with this camera. (p.110)
Data being recorded.
The image is being recorded on the
SD Memory Card/MultiMediaCard.
The protect setting or DPOF setting is
being changed.
Formatting...
The SD Memory Card/MultiMediaCard or
Built-in memory is being formatted.
Deleting
The image is being deleted.
Image folder could not be
created.
The largest file number has been assigned to
an image and no more images can be saved.
Insert a new SD Memory Card/MultiMediaCard
or format the SD Memory Card/MultiMediaCard
or Built-in memory. (p.110)
Battery depleted, the
image is not stored.
The battery is exhausted. The image you
just captured has not been saved.
Recharged the battery or replace with
charged battery.
Compression error
Compression of the image you captured
has failed. Change the recorded pixels or
quality levels, and take a picture again.
Data being recorded
The movie picture is being recorded.
Protect all images &
sounds
The image you are trying to delete is a protected image.
Alarm was set
The alarm has been enabled.
Appendix
127
Troubleshooting
Problem
Power will not
come on
No image on the
LCD monitor
Shutter will not
release
Picture is dark
Appendix
128
Cause
Remedy
Battery is not installed
Check battery is installed.
If not, install battery.
Battery is installed
incorrectly
Check orientation of battery.
Reinsert battery with () symbol
towards back of camera. (p.13)
Battery power is low
Insert a charged battery or use the
AC adapter.
LCD monitor is set to
OFF
Press Display button to turn LCD
monitor on. (p.40)
Image is displayed but
is hard to see
Image on LCD monitor may be
hard to see when taking pictures
outside in sunlight.
Flash is charging
When flash lamp blinks red, flash
is charging and no pictures can be
taken. Lamp lights red when
charging is completed.
No available space on
SD Memory Card/
MultiMediaCard or in
Built-in memory
Insert SD Memory Card/
MultiMediaCard with available
space or delete unwanted images.
(p.16, 84)
Recording
Wait until recording is finished.
Subject is too far away
in a dark environment,
such as a night scene.
Picture becomes dark if subject is
too far away. Take picture within
range of flash.
Background is dark
When taking a picture of a person
against dark background, such as
night scene, the person may
appear dark if the flash does not
reach background even with correct exposure. Set to
mode to
ensure both person and background are clear. (p.36)
Problem
Subject is not in
focus
Flash does not
discharge
Cause
Remedy
Subject difficult to
focus on
Subjects difficult to focus on using
autofocus: objects with little contrast
(blue sky, white walls, etc.), dark
objects, finely patterned objects,
fast-moving objects, scenery through
window or net, etc. Lock focus on
another object located at same distance (press shutter release button
halfway), then aim at target and
press shutter release button fully, or
use Manual Focus mode.
Subject is not in focusing area
Position subject in AF frame
(focusing area) in middle of LCD
monitor. If the subject is outside
the focusing area, aim the camera
at the subject and lock the focus
(press shutter release button
halfway), then compose picture
and press the shutter release button fully.
Subject is too close
Set focus mode on
(Macro) or
(Super Macro). (p.37)
Focus mode is set on
(Macro) or
(Super Macro).
Normal pictures will be out of
focus if taken with focus mode set
on (Macro) or
(Super Macro).
Flash mode is set to Off
Set to Auto or
The Capture mode is
set to
, continuous
shooting or infinitylandscape mode.
. (p.39)
Flash will not discharge in these
modes.
Appendix
129
Main Specifications
Type
Fully automatic compact-type digital still camera with built-in
zoom lens
Effective Pixels
3.2 megapixels
Sensor
3.34 megapixels (total pixels) 1/2.5 inch interline transfer CCD with
a primary color filter
Recorded Pixels
Still
Movie
2048 × 1536 pixels, 1600 × 1200 pixels,
1024 × 768 pixels, 640 × 480 pixels
320 × 240 pixels
Sensitivity
Auto, manual (equivalent to ISO 50, 100, 200)
File Format
Still
JPEG (Exif2.2), DCF, DPOF, PRINT Image Matching II
Movie AVI (Open DML Motion JPEG), approx. 12 fps, with sound
Sound WAV (ADPCM system), max. recording time 59 min. 46 sec.
(when using a 16 MB SD Memory Card)
Quality Level
Storage Medium
“Good”, “Better”, “Best”
Built-in memory (approx. 11 MB), SD Memory Card/MultiMediaCard
and MultiMediaCard (MMC)
Image Storage
Capacity
Quality levels
Best
()
Better
()
Good
()
2048 × 1536
07
13
019
1600 × 1200
11
20
028
1024 × 768
26
47
062
640 × 480
57
89
119
Recorded pixels
Movie images
(320 × 240)
30 sec. × 3
Exposure capacity when using a 16MB SD Memory Card/
MultiMediaCard
Auto, Daylight, Shade, Tungsten Light, Fluorescent Light, Manual
Lens
Focal Length
Digital Zoom
Capture mode
Max. 4×
Viewfinder
Type
Real-image zoom viewfinder
(Diopter adjustment in the range of –3 to +1m–1)
Wide 0.28×, Tele 0.78×
Appendix
White Balance
5.8 mm – 17.4 mm (Equivalent to 35 mm –
105 mm in 35 mm format)
Aperture
f/2.6 – f/4.8
Lens Composition 6 elements in 5 groups (one aspherical elements)
Zoom type
Electrically driven
38.4 mm x 28.5 mm (screen is filled) (using macro
Picture Range
mode or manual focus at max. WIDE position)
Lens Barrier
Electrically driven
Magnification
130
(Combines with 3× optical zoom to give
zoom magnification equivalent to 12×)
LCD Monitor
Playback
Functions
1.6 inch TFT color LCD monitor (with backlight)
Single-frame, 9-frame index, enlargement (max. 4x), scroll,
slideshow, movie playback, histogram display, image/sound copying, trimming, resizing
Focusing System Type
Manual Focus
Exposure
Mechanism
Shutter
Flash
TTL contrast detection system by sensor
7-point autofocus (Spot autofocus possible)
Focusing Range Normal: 0.4 m to infinity (full zoom range)
(From lens front) Macro: 0.18 m – 0.5 m (full zoom range)
Super macro: 0.06 m – 0.2 m (middle zoom position only)
Landscape: Infinity (full zoom range)
Focus Lock
By half-pressing shutter release button
0.06 m to infinity
AE Metering
TTL metering by sensor (multi-segment,
center-weighted, spot)
Shooting Modes Standard, Picture, Night-Scene, Movie,
Panorama Assist, 3D, Digital Filter, USER
EV Compensation ±2 EV (Set in 1/3 EV steps)
Movie
Recording time approx. 1 sec. – 30 sec.,
Fast Fwd Movie: max. approx. 50 min.
Type
Electronic/mechanical shutter
Speed
Approx. 1/2000 sec. – 1 sec.
Type
Flash Modes
Working Range
Auto flash with red-eye reduction function
Auto, Flash Off, Flash On, Auto + Red-eye
Reduction, Flash On + Red-eye Reduction
Wide: Approx. 0.2 m – 3.5 m w/sensitivity at 200
Tele: Approx. 0.1 m – 2.0 m w/sensitivity at 200
Drive Modes
Self-timer
Single-frame, Continuous, Remote Control, Self-timer
Electronic control type, delay time: approx. 10 sec.
World Time setting for 62 cities (28 time zones)
Rechargeable lithium-ion battery D-LI8, AC adapter (optional)
Battery Life
Approx. 160 images (with LCD monitor on, flash fired for 50% of shots and using a
rechargeable lithium-ion battery D-LI8, in accordance with Pentax measuring conditions)
In/Out Port
USB/AV terminal (PC communication type USB 1.1), external
power supply terminal
Video Output Format NTSC, PAL
Size
Appendix
Time function
Power Supply
83 (W) × 52 (H) × 20 (D) mm (excluding operating members and
projections)
Mass
98g (excluding battery and SD Memory Card/MultiMediaCard)
Mass when shooting 113g (including battery and SD Memory Card/MultiMediaCard)
Accessories
Rechargeable lithium-ion battery, 3D image viewer, USB cable,
software (CD-ROM), AV cable, strap, operating manual
131
WARRANTY POLICY
All Pentax cameras purchased through authorized bona fide photographic distribution channels are guaranteed against defects of
material or workmanship for a period of twelve months from date of
purchase. Service will be rendered, and defective parts will be
replaced without cost to you within that period, provided the equipment does not show evidence of impact, sand or liquid damage, mishandling, tampering, battery or chemical corrosion, operation contrary to operating instructions, or modification by an unauthorized
repair shop. The manufacturer or its authorized representatives shall
not be liable for any repair or alterations except those made with its
written consent and shall not be liable for damages from delay or
loss of use or from other indirect or consequential damages of any
kind, whether caused by defective material or workmanship or otherwise; and it is expressly agreed that the liability of the manufacturer
or its representatives under all guarantees or warranties, whether
expressed or implied, is strictly limited to the replacement of parts as
hereinbefore provided. No refunds will be made on repairs by nonauthorized Pentax service facilities.
Appendix
132
Procedure During 12-month Warranty Period
Any Pentax which proves defective during the 12-month warranty
period should be returned to the dealer from whom you purchased
the equipment or to the manufacturer. If there is no representatives
of the manufacturer in your country, send the equipment to the manufacturer, with postage prepaid. In this case, it will take a considerable length of time before the equipment can be returned to you
owing to the complicated customs procedures required. If the equipment is covered by warranty, repairs will be made and parts replaced
free of charge, and the equipment will be returned to you upon completion of servicing. If the equipment is not covered by warranty, regular charges of the manufacturer or of its representatives will apply.
Shipping charges are to be borne by the owner. If your Pentax was
purchased outside of the country where you wish to have it serviced
during the warranty period, regular handling and servicing fees may
be charged by the manufacturer's representatives in that country.
Notwithstanding this, your Pentax returned to the manufacturer will
be serviced free of charge according to this procedure and warranty
policy. In any case, however, shipping charges and customs clearance fees to be borne by the sender. To prove the date of your purchase when required, please keep the receipt or bills covering the
purchase of your equipment for at least a year. Before sending your
equipment for servicing, please make sure that you are sending it to
the manufacturer's authorized representatives or their approved
repair shops, unless you are sending it directly to the manufacturer.
Always obtain a quotation for the service charge, and only after you
accept the quoted service charge, instruct the service station to proceed with the servicing.
• This warranty policy does not affect the customer's statutory
rights.
• The local warranty policies available from Pentax distributors in
some countries can supersede this warranty policy. Therefore,
we recommend that you review the warranty card supplied with
your product at the time of purchase, or contact the PENTAX
distributor in your country for more information and to receive
a copy of the warranty policy.
Appendix
The CE Mark is a Directive conformity mark of the European
Community.
133
For customers in USA
STATEMENT OF FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment has been tested and found comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help.
For customers in Canada
This Class B digital apparatus meets all requirements of the
Canadian Interference - Causing Equipment Regulations.
Appendix
134
Pour les utilisateurs au Canada
Cet apareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
The CE Mark is a Directive conformity mark of the European
Community.
Declaration of Conformity
According to 47CFR, Parts 2 and 15 for
Class B Personal Computers and Peripherals
We:
PENTAX U.S.A., Inc.
Located at: 35 Inverness Drive East
Englewood, Colorado 80112 USA
Phone: 303-799-8000 FAX: 303-790-1131
Declare under sole responsibility that the product identified herein, complies with 47CFR Parts 2 and 15 of the
FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and
found to be compliant with the standards. Records maintained continue to reflect the equipment being produced
can be expected to be within the variation accepted, due
to quantity production and testing on the statistical basis
as required by 47CFR §2.909. Operation is subject to the
following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept
any interference received, including interference that may
cause undesired operation. The above named party is
responsible for ensuring that the equipment complies
with the standards of 47CFR §15.101 to §15.109.
Model Number: Optio S
Appendix
Product Name: PENTAX Digital Still Camera
Contact person: Customer Service Manager
Date and Place: February, 2003, Colorado
135
PENTAX Corporation 2-36-9,Maeno-cho, Itabashi-ku, Tokyo 174-8639,
JAPAN
(http://www.pentax.co.jp/)
PENTAX Europe GmbH (European Headquarters)
Julius-Vosseler-Strasse, 104, 22527 Hamburg,
GERMANY
(HQ - http://www.pentaxeurope.com)
(Germany - http://www.pentax.de)
PENTAX U.K. Limited Pentax House, Heron Drive, Langley, Slough, Berks
SL3 8PN, U.K.
(http://www.pentax.co.uk)
PENTAX France S.A.S. 12/14, rue Jean Poulmarch, 95106 Argenteuil Cedex,
FRANCE
PENTAX Benelux B.V. (for Netherlands)
Spinveld 25, 4815 HR Breda, NETHERLANDS
(http://www.pentax.nl)
(for Belgium & Luxembourg)
Weiveldlaan 3-5, 1930 Zaventem, BELGIUM
(http://www.pentax.be)
PENTAX (Schweiz) AGWidenholzstrasse 1 Postfach 367 8305 Dietlikon,
SWITZERLAND (http://www.pentax.ch)
PENTAX Scandinavia AB P.O. Box 650, 75127 Uppsala, SWEDEN
(http://www.pentax.se)
PENTAX U.S.A., Inc
35 Inverness Drive East, Englewood, Colorado
80112, U.S.A.
(http://www.pentax.com)
PENTAX Canada Inc. 3131 Universal Drive, Mississauga, Ontario L4X 2E5,
CANADA
(http://www.pentaxcanada.ca)
TAX
PEN
for your
precious moments
• Printed on recycled paper
• Specifications and external dimensions are subject to change without notice.
57243
Copyright © PENTAX Corporation 2003
01-200305 Printed in Japan
">